Beli Donau Alpha 30 bekas (24.681)

Tahun pembuatan: 2010, Kondisi: siap digunakan (bekas), Drilling capacity steel/cast iron: 25mm/32mm, thread cutting capacity steel/cast iron: M20/M24, tool holder: MK4, spindle speed: 3500 rpm, feed rate: 1050 mm/min, outreach range: 420 mm-1320 mm, arm travel: 900 mm, column vertical travel: 430 mm, quill stroke: 140 mm, swivel range: 325°, table dimensions X/Y: 1200 mm/600 mm, drive power: 1.6 kW, machine dimensions X/Y/Z: approx. 2500 mm/900 mm/1500 mm, weight: approx. 2200 kg. Documentation available. An on-site inspection is possible. Dedpfx Aju N Hdaeg Docg

Kondisi: bekas, Tahun pembuatan: 1993, Technical Details: Sheet width: 3150 mm Sheet thickness: 13 mm Frame gap: 3670 mm Blade length: 3150 mm Hold-down devices: 18 units Backgauge: motorized, 1000 mm Height above floor level: 850 mm Operating hours: 3,256 Table size (LxW): 3770 x 500 mm Total power requirement: 30 kW Machine weight approx.: 12.9 t Machine dimensions: 4.4 x 2.8 x 2.4 m Short-stroke mode Continuous operation Cutting gap illumination Hydraulic sheet lifting device Dodpfx Asu Icnfjg Docg Light curtain at rear Positionable backgauge

Tahun pembuatan: 2015, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: 2245, OFFER No. 2245 Djdpfed Sg Hrox Ag Decg 1 used, as-new laboratory batch extrusion granulation line with accessories, consisting of: - Single-screw extruder AlphaTec Type AE-S 25-30 - Screw Ø 25 mm – 30 L/D - Extruder drive 3 kW, screw speed 10 – 80 rpm - Air-cooled barrel, electrically heated - 1x degassing zone - 1x manual screen changer with screen Ø 68 mm - 1x strand die head - 1x water bath 1,000 x 150 mm, height-adjustable - 1x strand pelletizer, feed width 30 mm, drive 0.75 kW - Control cabinet with PID control, - Melt pressure, speed frequency controlled - Demonstration unit Test run with your material can be arranged at short notice after consultation. Additional extruders available ex-stock Wuppertal.

Kondisi: baik (bekas), Tahun pembuatan: 1965, Fungsionalitas: berfungsi sepenuhnya, kedalaman tenggorokan: 930 mm, For sale is a Donau DR30 rapid radial drilling machine. The machine is in good and fully functional condition. Technical data: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Tapping capacity in steel: approx. M36 in cast iron Spindle taper: MK 3 Spindle speeds: stepless approx. 45 – 2240 rpm Quill stroke: approx. 170 mm Arm reach: approx. 930 mm Arm swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Tapping device with cut-off and reverse function. Motorized height adjustment of the arm. Left-hand drilling operation by hand & foot control. Transport and loading can be organized at extra cost, Europe-wide, on request. Dcsdpfx Agswal Hps Dog All prices are plus VAT. Viewing possible by appointment. Contact us — our team will be happy to assist you! Trade-in or exchange possible! Machinery purchase / sales BUY / SELL OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1976, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: ZFM300H 76 2301, Mesin pemotong rak gigi Dodpfx Agjykpl Ns Decg

Kondisi: baik (bekas), Tahun pembuatan: 1962, Radial arm drilling machine, pillar radial drilling machine, bench drilling machine, radial arm drill, high-speed radial drilling machine - Clamping table: 400 x 1100 mm - Arm reach: 930 mm - Spindle taper: MT4 - Motor power: 1.35/1.8 kW - Spindle speeds: 41-1700 rpm - Column diameter: Ø 200 mm - Spindle stroke: 125 mm - Thread cutting device: YES - Feed: 0.075 - 0.3 mm/rev - Dimensions: 1800/1235/H2240 mm Dcjdpfx Agjirax Uj Dsg - Weight: 1500 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang gelombang laser: 1.064 nm, AL-IN 300 W, laser welding machine, demonstration model, like new, 1-year warranty, on original pallet, partially still packaged. Additional demo units available upon request. Sale only within the EU. - Motorized X, Y, Z axes, operable via joystick and semi-automatic mode - User coordinate system (UCS) – automatic Z-axis guidance when welding on inclined surfaces Accessories: Tilting/swiveling optics Ergo wedge for ergonomic working position Multi-function foot switch Angled foot with table plate for ALT-Basis C Beam deflection unit, tiltable 110° L/R incl. 12V External, non-regulated cooling Laser welding consumables, Lawitex starter package. As a manufacturer of laser welding wire, we can create wire selection tailored to your requirements; welding parameters are individually explained and stored for easy retrieval. We supply original Alpha Laser spare parts, offer application and product training as well as service at very favorable conditions. Dodpfx Aepcf Ntjg Docg We are an official distributor for Alpha Laser welding systems and, with nearly 30 years of experience in the field of welding technology, offer advanced laser welding technology from a single source. Inquiries, explanations, welding training and instructions (also by phone) available in German, English, and Polish. Supplier: Lawitex GmbH, 40764 Langenfeld (Rheinland), Germany

Tahun pembuatan: 2019, Kondisi: seperti baru (mesin pameran),

Kondisi: bekas, Tahun pembuatan: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universal - CNC gesteuerte Zahnstangenfräsmaschine Type UZFM - V 300 H - CNC Baujahr 1990 # 90-244x _____ max. Verzahnungslänge 2.100 mm Fräsweg/Fräsbreite quer max. 300 mm Modulbereich St/GG max. 16/18 Tisch-Aufspannfläche 510 x 2.400 bzw. 275 x 2.120 mm Einbauhöhe unter Fräs-Spindel-Achse min./max. 150 / 430 mm Fräser-Ø min. / max. Ø 125 + 2 x Schnitttiefe / 280 mm Fräserbreite max. fliegend / mit Gegenlager 50 / 140 mm Fräserdorn-Ø max. 22 - 50 mm Frässpindelkopf schwenkbar rechts / links (Hinterfräsungen) 30 / 45 ° Frässchlitten schwenkbar rechts / links (Schrägverzahnung) 30 ° 9 Spindeldrehzahlen 40 - 120 U/min. Vorschübe stufenlos (Frässchlitten) / Eilgang 0 - 1.300 / 2.000 mm/Min. Tisch-Eilgang 10.000 mm/Min. Frässpindelantrieb 5,5 kW Gesamtantrieb 10 kW - 400 V - 50 Hz Gewicht 5.000 kg Zubehör / Sonderausstattung: o SIEMENS - CNC - Steuerung Model M 810 für die Teilachse ( X ), sodaß eine schnelle Umstellung der Maschine möglich ist ohne Wechselräder. Teilschritte 0,001 - 2100 mm, auch unterschiedliche Teilungsdistanzen programmierbar, " Einstellung aller Vorschub- und Eilgangwege über die Hydraulik, Vorschub einstellbar für 2 Schnitte, Wegbegrenzung der Achsen über voreinstellbare Endschalter o Aufgebaute hydraulische Werkstückspanneinrichtung ca. 2.000 x 160 mm lang o verstärkter Fräskopf mit stufenlos regelbare Fräserdrehzahl o separat stehender Schaltschrank und Hydraulikanlage , im Tisch eingebauter Späneföderer und separat stehender Späneförderer mit Kühlmitteleinrichtung, Zentralschmierung, etc. Die Maschine könnte auch mit einer aktuellen SIEMENS-Steuerung nachgerüstet werden! A N G E B O T Wir freuen uns, Ihnen ab Lager, freibleibend und unter Vorbehalt technischer Änderungen und Zwischenverkauf, anbieten zu können: D O N A U - K N A P P (Deutschland) Universal – CNC-gesteuerte Zahnstangenfräsmaschine Typ UZFM - V 300 H - CNC Dedpfx Agot Hwwqe Dscg Baujahr 1990 Serien-Nr. 90-244x _____ Max. Verzahnungslänge 2.100 mm Fräsweg / Fräsbreite quer max. 300 mm Modulbereich (Stahl / Gusseisen) max. 16 / 18 Tischaufspannfläche 510 x 2.400 bzw. 275 x 2.120 mm Einbauhöhe unter Frässpindel, je nach Fräser-Ø 150 - 430 mm Fräserdurchmesser min./max Ø 125 + 2 x Schnitttiefe / Ø 280 mm Fräserbreite max. ohne/mit Gegenlager 50 / 140 mm Fräserdorn-Ø max. 50 mm Frässpindelkopf schwenkbar (für Rückfräsungen) rechts/links 30 / 45° Frässchlitten schwenkbar rechts/links für Schrägverzahnung 30° 9 Spindeldrehzahlen 40 - 120 U/min. Vorschübe stufenlos (Frässchlitten) / Eilgang 0 - 1.300 / 2.000 mm/min. Tisch-Eilgang 10.000 mm/min. Frässpindelantrieb 5,5 kW Gesamtantrieb 10 kW - 400 V - 50 Hz Gewicht 5.000 kg Zubehör / Sonderausstattung: * SIEMENS-CNC-Steuerung für die Teilachse (X), sodass eine schnelle Umrüstung der Maschine ohne Wechselräder möglich ist. Teilschritte von 0,001 - 2100 mm, auch unterschiedliche Teilungsdistanzen programmierbar. * Einstellung aller Vorschub- und Eilgangwege hydraulisch, Vorschub für 2 Schnitte einstellbar, Wegbegrenzung der Achsen über voreinstellbare Endschalter * Aufgebaute hydraulische Werkstückspannvorrichtung, ca. 2.000

Kondisi: bekas, Tahun pembuatan: 1980, Milling length 1750 mm Milling width 260 mm Module - max. 10 Module - min. 12 Total power requirement 8 kW Machine weight approx. 4500 kg Space requirement approx. m D O N A U - K N A P P Universal Rack Milling Machine Type UZFM - V 300 H Year of manufacture 1980 # 80-234x ----- Max. gear cutting length 1,750 mm Max. traverse path/milling width 260 mm Helical gear cutting up to 30° Dodpfjt Hxagex Ag Docg Module range steel/grey cast iron max. 10 to 12 Effective clamping surface of table 275 x 1,830 mm Installation height under milling spindle axis min./max. 150 / 430 mm Milling cutter Ø min. / max. 108 + 2 x cutting depth / max. 165 mm Max. milling cutter width free / with counter bearing 50 / 140 mm Milling arbor Ø max. 22 - 50 mm 9 spindle speeds 29 – 178 rpm Milling slide swiveling right / left 30° Milling head swiveling right / left 30 / 45° Stepless feeds (milling slide) 0 – 600 mm/min Rapid traverse return 2,000 mm/min Milling spindle drive approx. 4 kW Total drive 8 kW - 400 V - 50 Hz Weight 4,500 kg Accessories / Special features: • Automatic milling process control via cam field on the milling head slide and on the table slide, with the option of skip cycle (= automatic bypass of a non-milling area) and pendulum milling operation (= synchronous milling on 1st half of the table and workpiece changeover on 2nd half). • Hydraulic workpiece clamping device, continuous approx. 260 x 1800 mm, maximum clamping width 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric release. • Manual fine adjustment of the table (0.001 mm), e.g. for precise positioning into a pre-milled gearing • Various change gears (approx. 10 pieces), 2 milling arbors, central lubrication with pulse, built-in hydraulic system, separate coolant system, separate control cabinet, various used rack milling cutters. Price, ex stock plus VAT € 49,500.-- This machine is particularly suitable for milling racks as well as for the manufacture of broaching tools (back milling through milling head swiveling). Condition: very good - demonstration ready Delivery: ex stock - as inspected Payment: strictly net – upon receipt of invoice.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, gaya penjepit: 300 kN, diameter sekrup: 22 mm, berat keseluruhan: 2.000 kg, produsen pengendali: FANUC, This FANUC Roboshot alpha-i30B was manufactured in 2023. It features a clamping force of 300 kN, a screw diameter of 22 mm, and a maximum injection speed of 600 mm/s. Ideal for precision electric injection molding, the machine offers a compact platen size of 440x420 mm and efficient energy consumption. If you are looking for high-quality injection molding machines, consider the FANUC Roboshot alpha-i30B, which we offer for sale. Please contact us for further information. Advantages of the Machine Qualitative Advantages • The machine has approximately 100,000 cycles and was used exclusively for prototype TPE production. Technical Advantages • Max. injection volume: 29 cm³ • Injection stroke: 75 mm • Max. injection speed: 600 mm/s • Max. injection flow rate: 228 cm³/s • Number of heating zones (barrel): 3 • Number of pyrometers (nozzle): 1 • Total heating power: 3.8 kW Additional Information The machine is still powered / Option FL net for Fanuc robots / Option Ethernet IP for Fanuc robots / Integration of the Fanuc robot controller into Roboshot Dsdpfxjx D E A Ns Ag Docg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S2T238, diameter putar di atas sled silang: 210 mm, panjang pembubutan: 1.000 mm, diameter pembubutan: 330 mm, lubang spindel: 42 mm, kecepatan spindel (maks.): 3.500 rpm, daya motor spindle: 7.500 W, gerak cepat sumbu X: 3 m/menit, pergerakan cepat sumbu Z: 6 m/menit, panjang pemakanan sumbu X: 180 mm, panjang umpan sumbu Z: 1.000 mm, jarak gerak quill: 110 mm, diameter quill: 42 mm, gores kuas bulu: 110 mm, diameter ayun di atas peluncur silang: 210 mm, diameter pembubutan di atas alas geser: 330 mm, jenis arus masuk: tiga fasa, diameter ayun di atas peluncur melintang: 330 mm, saluran batang: 42 mm, hidung spindel: D1-4, tinggi pusat: 167 mm, Diameter batang (maks.): 42 mm, jarak pergerakan landasan silang: 180 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, de Djdpfx Agowtq T Is Decg

Kondisi: bekas, Tahun pembuatan: 2011, Technical Details: Turning length: 310 mm Swing diameter over bed: 500 mm Djdpfow S Efzjx Ag Docg Swing diameter over cross slide: 290 mm Centre distance: 500 mm X-axis travel: 190 mm Z-axis travel: z1: 335 / z3: 370 mm Y-axis travel: 80 mm Spindle speed: 6000 rpm Control: Heidenhain CNC Pilot 4290 Spindle bore: 73 mm Bar diameter: 50 mm Tool turret – number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X + Z axes: 30 m/min Operating hours (power-on): 36,443 h Operating hours (spindle): 8,545 h Interface: yes Total power requirement: 20 kVA kW Chip conveyor dimensions (LxWxH): 3.2 x 0.45 x 1.5 m CNC Slant Bed Lathe With 3-jaw chuck Ø 160 mm incl. matching flange (max. speed 4,500 rpm) and additionally 2 sets of spare jaws. 12-station turret, all stations driven; Sauter disc turret (C-axis = 300 rpm). Main spindle torque: 95 Nm at 100%, 127 Nm at 40%. Chip conveyor 450 K-1/250; year of manufacture: 2000 Electrical cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is for sale in non-functional condition. There is an unknown malfunction in the turret, so reference runs and axis movement are not possible. Therefore, machining operations cannot currently be performed. The machine is offered for sale as in need of repair! i.D. *

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2011, jam operasional: 8.545 h, Fungsionalitas: tidak berfungsi, panjang pembubutan: 310 mm, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 190 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 370 mm, diameter pemasangan: 30 mm, machine condition: non-functional. The machine has an unknown malfunction in the turret, therefore referencing and axis movements are not possible. The machine requires repair. Dedew T Srdepfx Ag Decg TECHNICAL DETAILS Turning length: 310 mm Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Distance between centers: 500 mm X-axis travel: 190 mm Z-axis travel: Z1: 335 / Z3: 370 mm Y-axis travel: 80 mm Control: Heidenhain CNC Pilot 4290 Spindle speed: 6,000 rpm Spindle bore: 73 mm Bar capacity: 50 mm Main spindle torque: 95 Nm at 100%, 127 Nm at 40% Tool turret - number of stations: 12 Tool holder: VDI 30 mm Rapid traverse X + Z axes: 30 m/min MACHINE DETAILS Total power requirement: 20 kVA Dimensions of chip conveyor (LxWxH): 3.2 x 0.45 x 1.5 m Operating hours power-on: 36,443 h Operating hours spindle: 8,545 h Interface: yes EQUIPMENT - 3-jaw chuck 160 mm with matching flange - 2 sets of spare jaws - Turret head for 12 tools with driven tooling - Disc turret Sauter (C-axis = 300 rpm) - Chip conveyor 450 K-1/250; year of manufacture: 2000 - Manual chuck installed - no hydraulic chuck - Electrical cabinet with Rittal cooling

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 210 mm, panjang pembubutan: 1.000 mm, diameter pembubutan: 330 mm, lubang spindel: 40 mm, kecepatan spindel (maks.): 3.500 rpm, daya motor spindle: 7 W, Perlengkapan: dokumentasi / manual, Tahun pembuatan: 2000 Dodpsxd Aigjfx Ag Docg Panjang pembubutan: 1000 mm Diameter pembubutan di atas alas: 330 mm Diameter di atas alas melintang: 210 mm Jarak antara senter: 1000 mm Tipe kontrol: FANUC Kepala spindle: Camlock D1-4 Lubang spindle: 40 mm Kecepatan spindle maks.: 3500 rpm Daya motor spindle: 7,5 kW Dimensi (P x L x T): 2100,0 × 1200,0 × 1600,0 mm Berat: 1200 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 75 kW (101,97 hp), Stein- und Erzbrecher (Backenbrecher) für den Einsatz in Steinbrüchen und im Bergbau Modell: PE600X900 Dedoq H Shcjpfx Ag Dscg Maximale Aufgabengröße: 500 mm Leistung: 80-135 t/h Motor: 75 kW Gewicht: 15 t Neben diesem Modell bieten wir auch weitere Modelle wie PE900X1200, PE500X750, PE250X400, PE400X600 usw. an. Zusätzlich führen wir auch Prallbrecher, Kegelbrecher, Hammerbrecher, VSI-Brecher und können komplette Anlagen zur Aufbereitung und Absiebung von Gestein mit einer Kapazität von 30–1000 t/h liefern. Kontaktieren Sie uns gerne für weitere Informationen, falls Sie ein anderes Modell oder eine andere Brecherart benötigen. Sie können uns auch eine Nachricht hinterlassen, wenn Sie ein anderes Modell oder einen anderen Brechertyp wünschen.

Kondisi: baik (bekas), Com J240/30 Mesin Pengikat pada Dudukan Salah satu produsen mesin pengikat paling terkemuka di pasar, diproduksi di Jepang. Mesin dapat beroperasi dalam mode manual maupun otomatis. Versi produksi, untuk beban berat. Mesin dipasang pada struktur mandiri dengan roda untuk transportasi. Menggunakan roll jumbo. Setelah material dimasukkan, mesin membungkus dengan pita, menekan, dan menyegelnya, sehingga terbentuk paket yang rapi. Dedpsy Nzltofx Ag Decg Ideal untuk mengemas kartu nama, selebaran, dan bahan lainnya. Spesifikasi teknis: Lebar pita: 30 mm Performa: 26 siklus/menit Dimensi produk yang diikat: 240 x 150 mm Dibuat di Jepang. Berat: 70 kg.

Kondisi: sangat baik (bekas), Nomor katalog 6726 DATA TEKNIS - Inlet corong pengisian: 280x300 mm - Outlet kayu hasil pencacahan: Ø 310 mm - Lebar kerja rotor: 340 mm - Motor utama: 22 kW - Jumlah pisau: 6 buah - Dimensi (P/L/T): 1300x1150x1680 mm - Berat: 720 kg KEUNGGULAN – Kondisi sangat baik – Mesin pencacah bekas Harga netto: 19.900 PLN Harga netto: 4.740 EUR Harga netto dihitung menurut kurs 4,2 PLN/EUR Dedpfoy N N Uvex Ag Djcg (dalam hal fluktuasi kurs yang signifikan harga dapat berubah)

Kondisi: sangat baik (bekas), 7026 Djdpfx Agjy Nzv Se Dscg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Dijual agregat lem profesional Robatech RoBa 30, buatan Swiss (Robatech AG CH-5630 Muri). Perangkat dalam kondisi kerja penuh, lengkap, dan siap digunakan. Ideal untuk lini pengemasan, gluing-folding machines, case erectors, serta mesin yang memerlukan aplikasi lem panas presisi. Spesifikasi teknis: * Model: RoBa 30 * Tahun produksi: 1984 Dcodpfsum Hufjx Ag Dsg * Kapasitas: 900 g/menit * Tekanan hidrolik maks.: 40 bar * Tekanan udara maks.: 5 bar * Suhu operasi maks.: 200°C * Daya: 240 V * Konsumsi arus: 10 A * Rasio pompa: 1:8 * Label identifikasi jelas, manometer berfungsi Kondisi: * perangkat dalam kondisi teknis baik * lengkap, tanpa kekurangan * kualitas Swiss – konstruksi sangat tahan lama

Kondisi: siap digunakan (bekas), Alpha SPG 75-MF1-7 gearbox SN: 203771 - 6000 rpm, bekas, kondisi terawat dengan baik, 100% fungsional, pengiriman sesuai foto Dcsdpey Nn Hkefx Ag Djg

Kondisi: bekas, Tahun pembuatan: 2007, Drilling capacity in steel (diameter): 40 mm Throat depth: 1050 mm Spindle speed: 15 – 2800 rpm Feed range: 0.075 – 0.45 mm/min Dimensions: 2450 x 1300 x 2300 mm Weight: 1500 kg Equipment: Machine Features • Worktable 1800 x 600 mm with 4 T-slots • Arm traverse: 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servomotor • 2 T-slots (18 mm) at rear of machine base • 2 T-slots (18 mm) on left of machine base • Tapping device • Central lubrication system • Coolant system • Machine light • CE marking • Safety guard • USB interface Dcodpfx Agsy Nd T Ho Djg Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table min.: 70 mm / max.: 680 mm Distance spindle nose – floor min.: 970 mm / max.: 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Data Drilling capacity solid: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency-controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servomotor: 0.25 kW Y-axis – AC servomotor: 0.25 kW Z-axis – AC servomotor: 4.50 kW W-axis – AC servomotor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis over 1200 mm: ±0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight Danumeric 440 (without packaging) with 1800 x 600 mm table: 2800 kg CNC Control Axes: 3 (X, Y, Z) Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all angles, 215 x 160 mm Position indication: Cartesian or polar, values absolute or incremental, unit: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining operation, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram technology: yes Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Any clamped rectangular parts - Any clamped round parts - Aligning cast and flame-cut parts - Angle position detection of round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Kapasitas pengeboran St 60/GG 22: 40/50 mm Pengeboran berulir St 60/GG 22: M 36/M 45 Dedjy I Ua Iopfx Ag Dscg Luas meja penjepitan: 600 x 1800 mm Penyesuaian tinggi lengan: 450 mm Radius pengeboran kecil/besar: 305/1305 mm Pemasangan spindel: SK 40 Langkah pinol: 200 mm Kecepatan spindel tanpa langkah: 15 - 2800 rpm Feed tanpa langkah: 5 - 2000 mm/menit Penggerak spindel, dikontrol frekuensi: 5,5 kW Koneksi listrik: 400 V, 14 kVA Berat: 3400 kg Kebutuhan tempat: 3800 x 2000 x 2500 mm

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 120 kg, panjang total: 900 mm, lebar total: 1.500 mm, tinggi total: 2.050 mm, tegangan masuk: 230 V, daya laser: 30 W, panjang gelombang laser: 1.064 nm, akurasi pengulangan: 0,01 mm, jenis laser: laser serat, Perlengkapan: Port USB, pencahayaan, The versatile LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser enables the marking of nearly all materials, such as steel, carbide, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, the use of a laser for permanent marking has become essential. The powerful laser software allows users to easily create text, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software is also capable of automatically serializing numbers and part numbers after initial setup. Moreover, it can retrieve variable data (such as drawing numbers and project designations) from existing spreadsheets and automatically transfer this information into predefined fields. Integration of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long components, motorized Z-axis, drawer systems, and more, are available upon request. Dedjyxccropfx Ag Decg Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking area 150x150mm (larger sizes available as an option) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system for automatic focus distance determination • Optional: extraction system (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder for easy focus adjustment • Signal tower for operating status display • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touch screen and adjustable keyboard tray • Frame made from aluminium profile • Air-cooled • Door width approx. 700mm / door pass-through height: 400mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (L x W x H) • Weight: approx. 120 kg

Kondisi: bekas, kapasitas pengeboran: 23 mm, Perlengkapan: Pelat tipe tersedia, Radial drilling machine cepat – Mesin bor berdiri Donau Werkzeugmaschinen DR23 radial drilling machine Nomor seri: 2062-4 Tegangan operasi: 380 V dengan netral, 50 Hz, 3 fase Kapasitas bor: hingga sekitar Ø 50 mm Rentang kecepatan: 58 - 1275 rpm Perangkat tapping ulir, overhang 920 mm Lampu mesin Dimensi meja plat dasar sekitar 1100x400 mm Daya motor sekitar 1,5 kW, tanpa pendingin 2 slot-T di kiri belakang Berat: sekitar 1.200 kg Inspeksi dengan daya dapat dilakukan dengan janji temu terlebih dahulu. Kesalahan pengetikan atau kekeliruan pada data teknis bisa terjadi. Harga atas permintaan Penjualan hanya di negara-negara UE. Dcjdpewybqqsfx Ag Dsg