Beli Feintool Pers Pengosongan Halus bekas (22.254)

Tahun pembuatan: 1994, Kondisi: bekas, Mesin bekas Tahun pembuatan: 1994 Perlengkapan dan data teknis: Lebar kerja: 300 mm Osilasi sabuk amplas: mekanis Panduan rol: berlapis karet Unit pengamplasan: dengan sepatu pengamplas Kecepatan pengumpanan: 2 tingkat Arah pengumpanan: dapat diganti (maju/mundur) Pengaktifan motor: bintang-segitiga Koneksi listrik: 380 V Codpfx Ajxq Ua Rjqxegw Berat: sekitar 450 kg Ketersediaan: segera Lokasi: Baden-Württemberg

Kondisi: bekas, Mesin bekas Tahun pembuatan: 1988 Kondisi: terawat Perlengkapan dan data teknis: - Panjang meja kerja: 1440 mm - Lebar total dua meja kerja: 710 mm - Penyesuaian kemiringan meja kerja: 0 – 30 derajat - Tekanan kerja: 6 bar - Panjang sabuk amplas: 2170 mm - Lebar sabuk amplas: 150 mm - Kecepatan sabuk amplas: 10 – 20 m/detik - Penyesuaian vertikal unit osilasi: 125 mm - Konsumsi udara: 25 NL/menit - Listrik: 400 V / 2,9 kW Berat: 490 kg Ketersediaan: segera Lokasi penyimpanan: 63934 Röllbach Cjdpfx Aexzl Aqjqxogw

Kondisi: baru, Tahun pembuatan: 2023, New machine Year of manufacture: 2023 Length approx.: 2,300 mm Width/Depth approx.: 1,100 mm Weight approx.: 980 kg Total table length: 2,300 mm Feed table length: 1,200 mm Working height: 930 mm Max. planing depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Planer fence tilting range: 90° - 45° Thickness extraction port diameter: 120 mm Main motor: 7 kW Required length: 2,300 mm Required width/depth: 1,610 mm Note on space required: Dimensions reflect maximum travels or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add stated measurements to required space to determine the recommended free installation area. Min. working height: 3.5 mm Max. working height: 250 mm Max. planing depth: 8 mm Mains voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Codew I U Nuepfx Aqxegw Availability: short notice Location: Solingen

Kondisi: sangat baik (bekas), NOMOR KATALOG 7854 Data teknis: - panjang sabuk: 2515x152 mm - lebar sabuk: 150 mm - osilasi - gerakan osilasi vertikal - panjang penghalusan: 790 mm - ukuran meja: 840x300 mm - meja kerja untuk elemen lengkung: 300x250 mm - pengaturan meja kerja: 80 mm - motor: 2,2 kW - agregat penghalus dapat diatur pada sudut 90–45 derajat - pengaturan kepala penghalus: 0–45 derajat - diameter sambungan penyerapan debu: 100 mm - dimensi p/l/t: 1450/600/1230 mm Cgsdozfpnropfx Aqxew - berat: 138 kg KEUNGGULAN – dengan osilasi – dengan sepatu tekan – untuk penghalusan lengkung maupun lurus – agregat dapat bekerja secara vertikal dan horizontal – tidak dicat ulang – mesin penghalus bekas, kondisi sangat baik Harga netto: 3.900 PLN Harga netto: 930 EUR berdasarkan kurs 4,2 EUR (Harga dapat berubah sesuai dengan fluktuasi nilai tukar)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2003, TRONCATRICE OTOMATIS UNTUK PADUAN, bekas, IMET VELOX 350 AF-E. SEPENUHNYA DIRENOVASI Cgodpfx Aqszh Ugfsxsw

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 500 t, panjang langkah: 400 mm, lebar meja: 1.600 mm, panjang meja: 900 mm, tahun perombakan terakhir: 2017, Perlengkapan: penghadang cahaya keselamatan, Dieffenbacher PO 500A Press A Dieffenbacher PO 500A press in very good technical condition, available for sale from a decommissioned stamping plant in Poland. Modernized in 2017 with a new Simatic S7 control system and new electrical cabinet. Equipped with optical safety barriers. Csdpfxev E Nlzo Aqxogw The machine can be inspected under power – the press remains connected and operational.

Tahun pembuatan: 1994, Kondisi: siap digunakan (bekas), Dijual mesin otomatis pengampelas profil dan tepi modular untuk pengampelasan tepi kayu solid dan veneer dalam operasi otomatis berkelanjutan. Kecepatan makan: 5–25 m/menit, unit: 5, rentang ketebalan benda kerja: 12–60 mm, rantai pengangkut: 80 mm, panjang belt ampelas: 2000 mm, lebar belt ampelas: 20 mm/35 mm, kecepatan belt: sekitar 7 m/detik, radius kerja maksimum: 12 mm. Dimensi mesin: sekitar 2670 mm/1200 mm/1800 mm. Berat: sekitar 1200 kg. Dokumentasi tersedia. Inspeksi dapat dilakukan dengan janji temu. Cjdpfx Aqjzh Nihsxjgw

Kondisi: sangat baik (bekas), Mesin press pasta kontinu untuk pasta pendek dan panjang. Dibeli untuk proyek namun belum pernah digunakan. Cgsdpfx Aqsyh Rdfjxsw

Kondisi: bekas, Tahun pembuatan: 2019, Press kamar - Press baling - Press bahan baku Bramidan X30 AD, bekas 🧰 Fitur Produk • Produsen: Bramidan • Tipe: X30 AD • Kondisi: Bekas, lihat foto • Warna: oranye • Tahun produksi: 2019 • Dimensi: sekitar 1760 x 1255 x 2295 mm • Berat bersih: 1650 kg • Daya tekan: 300 kN • Waktu siklus: 25 detik • Daya: 4 kW • Tegangan: 3 x 230 - 440 V / 50/60 Hz • Tingkat kebisingan: 59 - 60 dB • Berat bal: plastik hingga 425 kg, karton hingga 350 kg 💰 Harga: €7.490,- netto belum termasuk PPN. Cedpfx Aoxvyn Dsqxsgw • Diskon kuantitas: atas permintaan • Biaya pengiriman: seluruh Eropa atas permintaan • Waktu pengiriman: siap kirim segera • Inspeksi dan pengambilan: kapan saja dengan perjanjian Lebih dari 5000 meter rak palet dari berbagai produsen selalu tersedia di stok (Perubahan dan kesalahan teknis, data, dan harga, serta penjualan antara waktu, dapat terjadi! Lihat S&K kami, semua harga eksklusif PPN dari gudang.)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1959, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 650 t, panjang langkah: 400 mm, lebar meja: 1.400 mm, panjang meja: 1.600 mm, berat keseluruhan: 90.000 kg, tinggi kerja: 1.600 mm, Perlengkapan: penghadang cahaya keselamatan, de-35.11284 Becker & van Hüllen 3-Phasen Presse Presse in sehr gutem technischen Zustand aus einer aufgelösten Presserei in Polen zu verkaufen. Cedpfxsv Hpnlo Aqxegw 2023 modernisiert. Neues Simatic S7 Steuerungssystem sowie neuer Schaltschrank. Optische Schutzeinrichtungen installiert. Besichtigung der Maschine im laufenden Betrieb möglich – Die Presse ist noch am Stromnetz angeschlossen.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 630 t, lebar meja: 2.500 mm, panjang meja: 1.600 mm, berat keseluruhan: 100.000 kg, Perlengkapan: penghadang cahaya keselamatan, Müller ZE 625 4 Press A press in very good technical condition, available for sale from a decommissioned stamping facility in Poland. Cgodpfxsv Hp T Ue Aqxew Modernized in 2020. Equipped with a new Simatic S7 control system and a new electrical cabinet. Fitted with optical safety barriers. Possibility to inspect the machine under power – the press remains connected to electricity.

Kondisi: bekas, Tahun pembuatan: 1950, de2hu-it-lt-lv-nb-nl-pl Cgjdpjx Sr Evjfx Aqxew

Kondisi: bekas, Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, MESIN GERINDA LUAR BEKAS, GRISETTI SUPER 1000. MODEL RT SUPER, PANJANG MAKSIMUM YANG DAPAT DIGERINDA 1000 mm. TINGGI CENTER 160 mm. Cgodpszhugrefx Aqxew

Kondisi: siap digunakan (bekas), 1 Cjdpfxjyr Dlas Aqxsgw

Kondisi: sangat baik (bekas), Dinnissen sack emptying system, sack discharge station Semi-automatic machine Completely stainless steel Equipped with empty sack compactor Equipped with left/right distribution screw Cgsdpfszhkz Eox Aqxow Equipped with DCE Donaldson dust extractor Clean, complete machine

Kondisi: baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, Daya tekan: 1250 kN, Jumlah langkah: 55 min-1, Penyesuaian ram: 75 mm, Langkah: 20-120 mm, Daya motor: 11 kW, Tegangan: 380 V, Berat mesin: 8,6 t, Jarak lengan: 340 mm, Area pemasangan ram: 620 x 300 mm, Area pemasangan meja: 650 x 1000 mm, Kopling hidrolik Ortlinghaus dengan rem ganda, Cgsdpfoxxa Aajx Aqxjw Pengoperasian dengan dua tangan, Perbaikan pada ram telah dilakukan secara profesional.

Kondisi: bekas, Tahun pembuatan: 1984, Cycle time 0 sec Total power requirement 2.5 kW Machine weight approx. 1 t Space requirement approx. m P O S A L U X (CH) Horizontal 3-spindle fine boring machine Model: MICROFOR PNC 3 Year of manufacture: 1984 Drilling diameter: 0.15 - 2 mm Spindle stroke: 0 - 18 mm Working stroke max.: 0 - 12 mm Rapid traverse: 60 mm/sec Drilling feed: 0 - 5 mm/sec Spindle speeds: 3,500 - 11,500 rpm Distance between spindles (vertical): approx. 80 mm Table rotation speed (for deburring): approx. 100 rpm Table diameter: approx. 100 mm Table bore: approx. 70 mm Table slide swing device: approx. 60 °/sec Swivel range: 0 - 100° Total drive approx. 2.5 kW / Weight approx. 1000 kg Accessories / Special equipment # 6.8230/9 Machine equipped with a newer POSALUX-SELECTRON control system Cjdpfx Aqot Hwvgjxjgw with keypad and LED display for direct programming on the machine, based on the crossbar distributor principle. Setting microscope, machine light, left-hand version - in very good condition

Kondisi: bekas, Tahun pembuatan: 1985, Pressing force: 63 t Passage width: 1350 mm Stroke: 300 mm Total power requirement: 16 kW Machine weight approx.: 10 t Space requirement approx.: 2.0 x 1.8 x 3.4 m HYDRAP Hydraulic double-column press (embossing press with sliding table) Type: HPDb 63 Year of manufacture: 1985 Serial no.: H 40/5273 Pressing capacity of upper ram: 63 t Return force: 7 t Stroke approx.: 300 mm Table size: 1200 x 500 mm Ram plate: 1200 x 500 mm Max. installation height (without tool changer): approx. 400 mm Stroke speeds up/down / full load: 400/400 or 16 mm/sec Clearance between uprights (front): 1350 mm Clearance between uprights (side): 350 mm Ejector in ram pressure/stroke: 1.2 t / 19 mm Pump drive: 11 kW Total drive approx. 16 kW - 380 V - 50 Hz Weight approx.: 10,000 kg Machine dimensions (W x D x H): 2.0 x 1.8 x 3.4 m (+ shuttle table) Accessories / Special equipment Stable double-column frame press with adjustable quadruple prism guides, equipped with: • Hydropneumatic sliding table (approx. 625 mm transverse stroke) with two clamping surfaces, which accommodate the pressed parts and the lower tool, position them under the ram, and after the pressing operation transport them to the rear onto a stacking device. The table then returns to the starting position. This system can be easily removed or modified. • CNC press controller (Siemens S5) with monitor for input of all relevant process data or for saving tooling data, allowing for easier and faster machine setup and for monitoring part transport. Shuttle table holder. • SICK light barriers fitted at the front press area/ loading station. • The ram is equipped with an electromechanical depth stop (300 mm stroke) and hydraulic tool clamping device, as well as integrated hydraulic ejector. • Displays for pressure and oil temperature, part counter, foot switch, two-hand release, central lubrication, hydraulic oil flow cooling, free-standing electrical cabinet, etc. Cgedpfx Aot Hwxuoqxow The machine was used for pressing edge trims on cylinder head gaskets. Condition: Good to very good – demonstration ready, under power Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1987, Pressure 125 t Upright distance 1050 mm Stroke 250 mm Total power requirement 40 kW Machine weight approx. 8.5 t Space requirement approx. m DUNKES CNC control system type CNC 1000, controlled drawing cushion, 4-fold prism guide, SICK light curtain, contact pressure gauge, Codpfxet Hwuij Aqxogw Cutting impact damping

Kondisi: bekas, Tahun pembuatan: 1980, Pressure 40 t Cgjdjt Hxczepfx Aqxew Table length 670 mm Table width 570 mm Total power requirement kW Machine weight approx. t Space requirement approx. m

Kondisi: bekas, Tahun pembuatan: 1977, Hydraulic C-Frame Drawing Press FRITZ MÜLLER CEZ 160.5.8 Pressing force: 160 t Throat depth: 360 mm Stroke: 560 mm Total power requirement: 33 kW Machine weight: approx. 6,000 kg Space requirement: approx. 2,000 x 2,400 x 3,650 mm Manufacturer: FRITZ MÜLLER Model: CEZ 160.5.8 Year of manufacture: 1977 / 2004 (retrofitted) Serial no.: 856597 SPECIFICATIONS: • Upper ram pressing force: 160 t • Return pressing force: 16 t • Drawing cushion pressing force: approx. 40 t • Ram area: approx. 800 x 600 mm • Table size: approx. 900 x 720 mm • Table bore: 160 mm • Maximum daylight opening: 700 mm • Throat depth: 360 mm • Table height above floor: 900 mm • Ram bore for tool mounting: 50 mm • Upper ram stroke: approx. 560 mm • Drawing cushion stroke: approx. 200 mm • Drive power: approx. 30/33 kW - 400 V – 50 Hz • Weight: approx. 6,000 kg • Machine dimensions (L x W x H): 2,000 x 2,400 x 3,650 mm Equipment / Special features: Cgedot Hw E Iepfx Aqxjw • Hydraulic drawing cushion integrated in the table with adjustable cam rail for stroke length • Side-mounted cam rail for upper ram stroke adjustment, including switches for rapid traverse, working stroke, and return • Two-hand control mounted at the front of the table, foot switch, etc. • Built-in filter pump, pressure display via manometer above the cylinder • Integrated cut shock absorber, piece counter, etc. • Freestanding control cabinet completely renewed in 2004 at the manufacturer's factory, with timer for pressing time and monitoring lights • Overhauled/modernized hydraulics with integrated oil cooler Condition: good – will be available for powered demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. A further selection of hydraulic presses is always available from our stock – please contact us for current offers.

Kondisi: bekas, Tahun pembuatan: 1990, Pressing force: 3 t Reach: 0 mm Stroke: 200 mm Total power requirement: 15 kW Machine weight approx.: 4 t Space requirement approx.: m JENNY – Switzerland, automatic double-column straightening press Type RZ-205/3-600, Year of manufacture 1990, Serial no. 86 596 Upper ram pressing force 3 t Ram stroke approx. 200 mm Maximum installation height: 500 mm Maximum clamping length of workpiece: 600 mm Height of center above table approx.: 210 mm Ram speed up: 0.17 mm/sec Ram speed down: 0.02 – 0.17 mm/sec Pump drive: 15 kW Csdpst Hw Amjfx Aqxogw Total drive: approx. 20 kW – 380 V – 50 Hz Weight approx.: 4,000 kg Accessories / Special equipment: Machine without automatic workpiece feed, the parts (shaft-shaped) are inserted manually, in front of the working area there is a Plexiglas sliding cover, manually operated Currently equipped with 1 straightening punch and 4 pneumatic measuring points, but connection options for up to 7 measuring points. These are longitudinally adjustable on the lower press table over a range of approx. 500 mm, the straightening punch is adjustable on the upper ram in a prism guide 2 tailstocks adjustable on the press table up to a maximum clamping length of 600 mm, left side motor-driven with clamping quill, right side with indexing disc Workpiece rotation via stepper motor from 10 to 100 rpm 2 workpiece supports (prisms) left and right, for supporting the workpiece The workpiece is measured at predetermined points and straightened accordingly, the straightening process is monitored and controlled with the measuring device Straightening stroke control for preset ram stroke Left tailstock motorized Original JENNY cycle control (FMS) in separate control cabinet with monitor and keyboard, parameter input,

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force: 10 t Throat width: 500 mm Stroke: 200 mm Total power requirement: 10 kW Machine weight: approx. 4,500 kg Space requirement: approx. m M A E Automatic double-column straightening press with microprocessor control Model: ADS F 10 RH Year of construction: 1984 Serial No.: 5 002 84 00 Cedpfet Hwwdex Aqxogw Straightening force - Upper ram pressing capacity: 10 t Return force: 7.5 t Ram stroke: 200 mm Stroke speed: 100 mm/s Distance between table and ram (max.): 160 mm Workpiece clamping length, approx.: 600 mm Max. installation height: 600 mm Pump drive: 5.5 kW Total drive approx.: 10 kW – 380 V – 50 Hz Weight approx.: 4,500 kg Machine height approx.: 3,300 mm Accessories / Special Features: • FEINPRÜF measuring and sequence control MILLITRON P 2070 with display screen for fully automatic straightening process: load workpiece, measure the “bend,” position the workpiece at “maximum bend at the top,” straightening process, control measurement (and if necessary re-straightening), eject workpiece. • Machine equipped with a short workpiece feed using a lift beam; the workpiece is centered and clamped between centers in pneumatic tailstocks and with • currently 3 straightening punches and 5 measuring points for one workpiece; 2 workpiece supports on the left and right, as well as 1 pneumatically adjustable straightening anvil. • The straightening punches are individually pneumatically controlled. • Gripper for scrap parts that are no longer straightenable, mounted at the rear. Condition: good to very good – will be available for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. Further straightening presses in stock – please contact us for details.

Kondisi: bekas, Tahun pembuatan: 1971, en-GB Cgjdpfx Ajt Hw Dweqxew

Kondisi: bekas, Tahun pembuatan: 1984, Pressing force 500 t Clear width 750 mm Cedst Hwpyspfx Aqxegw Stroke 120 mm Total power requirement 57 kW Machine weight approx. 16 t Space requirement approx. ... m HYDRAP CNC press control and Siemens Simatic S5 control, continuously adjustable workpiece transport unit around the right column, table size 400 x 740 mm, max. installation height 200 mm