Beli Hidrobrasil C-Press bekas (64.413)

Kondisi: bekas, Single-column Hydraulic Press HYDRAP Type HPSK 25 Serial No. 6312 Year of manufacture: 1989 Pressing force: 25 tons Ram stroke: 500 mm Throat depth: 300 mm Kdsdpfxohrakvo Adkjl Installation height: 700 mm Table size: 1000 x 500 mm Table bore: Ø 210 mm Ram area: 400 x 360 mm Clamping bore: Ø 40 mm Table height above floor: 855 mm Rapid advance speed: 280 mm/sec Pressing speed: 3.5 mm/sec up to 25 mm/sec Return speed: 280 mm/sec Hydraulic tank capacity: 240 liters Drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz - Operation and programming via SIEMENS S5 with OP1 controller - Measurement system for stroke adjustment - Pressing speed steplessly adjustable via potentiometer - Pressure steplessly adjustable via manual pressure regulator - Short-stroke device - Mechanical tool clamping on ram with T-slots and clamping pin bore - Control cabinet with electrical control mounted on the machine - Two-hand operation and electrical connection for foot switch - Control unit prepared for electrical tool monitoring - Hydraulic and electrical schematics available Space requirement (L x W x H): 1800 x 1200 x 2930 mm Weight: approx. 4 tons Good condition

Kondisi: bekas, Single-Column Hydraulic Press SCHÖN Type FES / C 7 Machine No. 4281 Year of Manufacture: 1995 Press Force: 7 tons Throat Depth: 170 mm Throat Depth (Rotary Indexing Station): 60 mm Table Size: 310 x 200 mm Rotary Indexing Table: Ø 400 mm, with 12 indexing stations Ram Surface: approx. Ø 100 mm Ram Plate: 315 x 200 x 35 mm Ram Stroke: 100 mm Installation Height (Rotary Table to Ram Plate): max. 130 mm Table Height above Floor: 890 mm Ram Speed Rapid Down: approx. 300 mm/sec Ram Speed Rapid Up: approx. 300 mm/sec Ram Speed Working Feed: approx. 30 mm/sec Drive Power: 1.5 kW Power Supply: 380 Volt, 50 Hz Tank Capacity: approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7-1200 - Pneumatic rotary indexing table GECHTER with 12 stations - Mechanically adjustable fixed stop - Adjustable pressure holding time at bottom dead center - Electric two-hand control Required space (L x W x H): 1450 x 850 x 1900 mm Weight: 700 kg Good condition Kdjdpfx Ajr I E Itodkjl

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, daya: 11 kW (14,96 hp), tegangan masuk: 200 V, gaya penekanan: 160 t, panjang meja: 600 mm, berat keseluruhan: 19.000 kg, gaya punching: 160 t, jenis penyesuaian ketinggian: listrik, tinggi pemasangan: 1.900 mm, penyesuaian silinder hidrolik: 100 mm, penyesuaian langkah: 130 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, Manufacturer: AIDA Model: NC2-160 Press force: 160 t Year of manufacture: approx. 1991 Stroke length: 130 mm Shut height: (adjustable) 285–335 mm Table: 1900 x 600 mm Ram: 1360 x 585 mm Electrical power: 3x200V (!!), 15 kW – Japanese standard Net weight: 19,000 kg Dimensions: 2140 x 2210 x 3175 mm Kodsu D Dhxepfx Adkodl Automatic lubrication system. Optional with decoiler and straightening machine.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2018, nomor mesin/kendaraan: DF0150, gaya penekanan: 63 t, Single-column Press – Manufacturer Calende – 63 t C-Frame Press – Table 750 × 600 mm For sale is a robust hydraulic single-column press (C-frame design) from Calende, offering a pressing force of 63 tons. The machine features high traversing speeds, a modern Siemens control system, and a compact structure, making it ideally suited for assembly, straightening, and pressing operations in industrial applications. ==== Technical Data & Information: Single-column Press Calende – 63 t C-Frame Press ==== General Information - Manufacturer: Calende - Model: Single-column Press - Design: C-frame Press / Single-column Press - Pressing Force: 63 t - Machine Weight: approx. 5.1 t - Dimensions (L × W × H): approx. 1,500 × 1,600 × 2,995 mm ==== Working Area - Passage Width: 700 mm - Stroke: 500 mm - Max. Working Height: 700 mm - Table Height: 850 mm ==== Table & Ram - Table Plate: 750 × 600 mm - Ram Plate: 600 × 540 mm ==== Speeds - Approach Speed: max. 140 mm/s - Pressing Speed: 15 mm/s ==== Hydraulics - Motor Power: 11 kW - Retraction Force: 6 t - Oil Tank Capacity: 150 l ==== Electrical & Control - Control Voltage: 24 V - Frequency: 50 Hz - Control System: Siemens S7-1200 Kedpofhcc Uofx Adkjdl - Monitor: Siemens, 12" ==== Assembly operations, pressing-in operations, straightening operations, series production, workshop applications, maintenance Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, tool adjustment press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements by fully complying with the Brazilian national safety guideline NR 12, which is based on these standards. Our core competence lies in custom machine building and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2022, gaya penekanan: 100 t, Hydraulic C-Frame Press – Manufacturer: Hidrobrasil – 100 t – Table Ø 1050 mm For sale is a high-performance hydraulic C-frame press manufactured by Hidrobrasil, featuring a pressing force of 100 t. Designed for industrial applications, this machine offers optimal conditions for demanding forming, assembly, and production processes due to its high operating speed and robust construction. ==== Technical Specifications + Information: Hydraulic C-Frame Press – 100 t ==== General Information - Manufacturer: Hidrobrasil - Model: C-Frame Press - Design: C-frame construction - Pressing force: 100 t - Machine weight: approx. 3,500 kg - Dimensions (W × D × H): approx. 1,354 × 2,005 × 2,595 mm ==== Working Area - Daylight opening: 350 mm - Stroke: 300 mm ==== Table & Ram - Table diameter: Ø 1,050 mm Kedpfx Aohmi T Usdkjdl ==== Speeds - Approach speed: 250 mm/s - Pressing speed: 3 – 15 mm/s - Return speed: 150 mm/s ==== Hydraulics - Number of cylinders: 2 - Cylinder diameter: Ø 250.97 mm - Piston diameter: Ø 41.76 mm - Max. operating pressure: 210 bar - Return force: 10 t - Additional ejector force: 5 t - Additional stroke: 150 mm ==== Hydraulic Power Unit - Pump capacity: 44.5 l/min - Pump displacement: 27.59 cm³/rev - Motor power: 14.24 kW - Motor speed: 1,500 rpm - Oil tank capacity: 350 l ===== Assembly work, metal forming, serial production, heavy-duty applications, toolmaking, industrial press operations C-Frame Press, Hydraulic Press, Industrial Press, Production Press, Heavy-Duty Press, Tryout Press, Tool Try-Out Press Are you looking for a hydraulic press tailored to your application requirements? Contact us for an individual offer. Our hydraulic presses are manufactured in compliance with German machinery directives, European machinery directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards, as they comply in every respect with the Brazilian national safety directive NR 12, which builds upon these. Our core expertise lies in special-purpose machine engineering and press automation. We supply custom-designed hydraulic presses at surprisingly affordable prices. We use primarily components from leading European manufacturers for our hydraulic assemblies.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0195 - Rev.00, gaya penekanan: 40 t, Single-column press – Manufacturer Calende – 40 t C-frame press – Table 750 × 720 mm For sale is a compact hydraulic single-column press (C-frame) from manufacturer Calende with a pressing force of 40 t. This machine impresses with its high operating speeds, modern Siemens control system, and robust construction, making it ideal for assembly, straightening, and press-fitting tasks. ==== Technical Data & Information: Single-column press Calende – 40 t C-frame press ==== General Information - Manufacturer: Calende - Model: Single-column press - Type: C-frame press / single-column press - Pressing force: 40 t - Machine weight: approx. 3,800 kg - Dimensions (L × W × H): approx. 1,300 × 1,800 × 3,200 mm ==== Working Area - Throat width: 850 mm - Stroke: 500 mm - Max. working height: 700 mm - Table height: approx. 850 mm ==== Table & Ram - Table size: 750 × 720 mm - Ram plate: 600 × 450 mm Kdodpfx Aofhcc Hjdkol ==== Speeds - Approach speed: max. 140 mm/s - Pressing speed: 15 mm/s - Return speed: 140 mm/s ==== Hydraulics - Motor output: 12.7 kW - Return force: 4 t - Oil tank capacity: 160 l - Oil cooling: electric, 1.5 kW (max) ==== Control & Operation - Control system: Siemens S7-1200 - Monitor: WEG, 10" ===== Assembly, press-fitting, straightening, series production, workshop applications, maintenance Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, die tryout press, tryout press, tool try out press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety directive NR 12, which builds on these standards. Our key strengths are custom machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we use components predominantly from leading European manufacturers.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, nomor mesin/kendaraan: DF0151 - Rev.00, gaya penekanan: 110 t, Single-column Press – Manufacturer Calende – 110 t C-Frame Press – Table 800 × 700 mm For sale is a powerful hydraulic single-column press (C-frame) by Calende with a pressing force of 110 t. The machine offers high dynamics thanks to proportional valve control, modern Siemens automation, and comprehensive adjustment options, making it ideal for demanding assembly, straightening, and press-fitting applications. ==== Technical Data & Details: Single-column Press Calende – 110 t C-Frame Press ==== General Information - Manufacturer: Calende - Model: Single-column Press - Design: C-Frame Press / Single-column Press - Pressing force: 110 t - Machine weight: approx. 5 t - Dimensions (L × W × H): approx. 1,950 × 1,510 × 3,145 mm ==== Working Area - Throat width: 800 mm - Stroke: 500 mm - Max. working height: 700 mm - Table height: approx. 900 mm Kodpsdxrqwsfx Adkjdl ==== Table & Ram - Table plate: 800 × 700 mm - Ram plate: 800 × 600 mm - Ram plate thickness: 6 inch ==== Speeds - Approach speed: 5 – 195 mm/s - Pressing speed: 1 – 15 mm/s - Return speed: 5 – 140 mm/s ==== Hydraulics - Motor power: 20 kW - Retraction force: 11 t - Cylinder diameter: Ø 200 mm - Oil tank volume: 400 l - Proportional valve for speed regulation ==== Controls & Operation - Control system: Siemens S7-1200 - Monitor: Siemens, 10" - Program memory: up to 200 programs - HMI pressure control: 20 – 110 t - Siemens remote access for maintenance ==== Safety & Equipment - Light barriers: Schmersal, 700 mm - Motor: IE3 energy efficiency (CE compliant) ===== Assembly work, Press-fitting, Straightening, Series production, Tool making, Industrial manufacturing, Maintenance Single-column press, C-frame press, Hydraulic press, Workshop press, Assembly press, Industrial press, Tool tryout press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all requirements of the Brazilian national NR 12 safety standard, which is based on these. Our main strength lies in custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly attractive prices. Only components from leading European manufacturers are primarily used in the hydraulic systems of our presses.

Kondisi: baru, Tahun pembuatan: 2021, gaya penekanan: 17 t, Single-column press – Manufacturer Hidrobrasil – 17 t C-frame press – Table 400 × 400 mm For sale is a compact hydraulic single-column press (C-frame) from Hidrobrasil with a pressing force of 17 t. The machine is designed for continuous multi-shift operation and is ideal for assembly, press-fitting, and light forming tasks. Thanks to its robust design and user-friendly operation, it is versatile for use in workshops and production environments. ===== Technical data + information: Hydraulic single-column press – C-frame – 17 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-column press - Design: C-frame press / single-column press - Pressing force: max. 17 t (170 kN) - Pressure range: adjustable from 5 to 17 t - Total weight: approx. 1 t - Dimensions (L × W × H): approx. 1,150 × 800 × 2,200 mm - Table height: 850 mm - Operating sides: 1 ==== Working Area - Max. opening width: 250 mm - Stroke: 100 mm - Minimum opening: 100 mm - Parallelism deviation: ± 0.1 mm ==== Table & Ram - Table plate: 400 × 400 mm - Ram plate: 200 × 200 mm - Design: with T-slots and central cylinder clamping ==== Speeds - Approach speed: 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: approx. 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Operating pressure: max. 250 bar - Pressure accuracy: ± 5 bar - Pump: gear pump, approx. 6 l/min Kdjdpfxegrki So Adkel - Oil volume: approx. 100 l (HLP 46) - Oil temperature: max. 55 °C - Ambient temperature: max. 40 °C ==== Drive & Electrics - Motor power: 2.2 kW - Total connected load: approx. 3 kW - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Manual lever operation with two speeds - Pressure adjustment via rotary knob - Oil temperature indicator - Control cabinet mounted on the right - Power supply: 3,000 mm cable with 16 A plug - Machine body powder-coated / double-painted ==== Control Cabinet - Protection rating: IP54 - Reserve space: approx. 20% - Cooling: no - Internal lighting: no - Operating mode switch: lockable ==== Design & Safety - Hydraulic unit mounted on top of the machine - Construction as an oil-hydraulic single-column press - Complies with current UVV and EU directives ===== Assembly work, press-fitting operations, small-batch production, workshop applications, light forming technology Single-column press, C-frame press, hydraulic press, workshop press, press-fitting press, industrial press, die set-up press, tryout press, tool try out press Are you looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are manufactured according to German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses surpass Canadian and European safety requirements as they fully comply with all aspects of the Brazilian national safety regulation NR 12, which these build upon. Our key strength is special-purpose machine construction and press automation. We offer customised hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2026, gaya penekanan: 100 t, C-frame Press – Manufacturer: Durendus – 100 t C-Frame Press – Table 800 × 600 mm For sale is a hydraulic single-column press (C-frame) from Durendus, with adjustable press force up to 100 t. This machine is suitable for a wide range of pressing, assembly, and forming tasks, can be manufactured at short notice, and customized to your specific requirements. ===== Technical Data & Information: Hydraulic Single-Column Press – C-Frame – 100 t ==== General Information - Manufacturer: Durendus - Model: Single-Column Press - Design: C-frame Press / Single-Column Press - Press Force: 15 – 100 t (adjustable) - Installation Height: max. 700 mm - Table Size: 800 × 600 mm - Ram Area: 800 × 600 mm - Table Height: 900 mm - Dimensions (W × D × H): approx. 1,600 × 1,800 × 2,900 mm - Machine Weight: approx. 4,800 kg - T-Slots: as per customer specification ==== Hydraulic Cylinder - Stroke: 0 – 500 mm (adjustable) - Working Pressure: max. 245 bar - Return Speed: 110 mm/s - Pressing Speed: 5 – 12 mm/s - Rapid Traverse Speed: 140 mm/s ==== Hydraulic Power Unit - Pump: Bosch Rexroth - Flow Rate: 28 l/min - Motor Power: 11 kW - Pressure Accuracy: ± 5 bar - Valve: NG-50 - Mounting: Hydraulic unit top-mounted - Filter: Filtrec - Oil Level Monitoring: electronic - Cooling: Air cooling ==== Control & Operation - PLC: Siemens S7-1200 - Touchscreen: Siemens SIMATIC Comfort 9" - Adjustable Parameters: Pressure, stroke, speeds - Oil temperature display: available - Filter monitoring: available - Fault display: available - Remote access: available - Recipe storage: up to 100 programs ==== Modes of Operation - Manual (setup) - Manual (single cycle) - Automatic operation - Operation: two-hand control and foot switch ==== Safety - Hydraulic ram locking - Upper and lower limit switches - Safety PLC - Light curtains (SICK / Keyence / Leuze), 700 mm - Monitored safety doors left and right ==== Electrical - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor connection: 11 kW - Total connected load: approx. 13 kW Ksdsfu Nqxjpfx Adkjdl ===== Assembly work, pressing, forming technology, series production, toolmaking, maintenance Single-column press, C-frame press, hydraulic press, industrial press, production press, die set-up press, tryout press, tool try out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized quotation. Our hydraulic presses are built in compliance with German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety standards, as they fully comply with the Brazilian national safety regulation NR 12, which is based on these standards. Our core strength lies in special purpose machinery and press automation. We offer customized hydraulic presses at surprisingly competitive prices. The hydraulic systems of our presses are equipped predominantly with components from leading European manufacturers.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, saluran warna: 2 kleuren rechtdoor, berat kertas (min.): 30 g/m², berat kertas (maks.): 350 g/m², lebar kertas (min.): 148 mm, lebar kertas (maks.): 520 mm, tinggi kertas (min.): 100 mm, tinggi kertas (maks.): 365 mm, panjang total: 2.765 mm, lebar total: 1.523 mm, tinggi total: 1.560 mm, persyaratan ruang panjang: 2.765 mm, lebar yang dibutuhkan: 1.523 mm, kebutuhan tinggi: 1.560 mm, jenis arus masuk: tiga fasa, arus masuk: 20 A, tegangan masuk: 200 V, Perlengkapan: dokumentasi / manual, 2-color offset press, built to a high standard with hardened and ground gears. The cylinders run in class P5 preloaded tapered roller bearings (in sets of 2) and are lubricated in an oil bath with pressure lubrication. B3 format (35x50 cm) in standard conventional configuration (no autoplate and/or cocking), but equipped with an alcohol dampening system with large dampening rollers, similar to the SM52 design—delivers excellent print quality. Machine comes from the first owner, who did not maintain it properly (cosmetically); however, a comprehensive maintenance history from the importer is available. The last recorded counter reading is 11.6 million (from 2003). Due to illness and outsourcing printing jobs, the previous owner—a print broker—hardly used the machine since then. We will check the current counter reading and ensure correct and reliable operation. Dry ice cleaning is still being considered, as well as a complete overhaul of the machine, as its mechanical condition is exceptionally good. However, these measures will increase costs, so the press is now offered at the lowest price, as is, EXW our warehouse in Son, NL. Any type of inspection is, of course, allowed. We guarantee the machine to be free from major breakages, cylinder damage and/or cylinder repairs, and with undamaged gears. The rubber rollers are glazed and must be replaced. The Royce ECO recirculation and cooling unit for the dampening system shows signs of corrosion. Some specifications (full spec sheet PDF available at the bottom of this page): - Maximum printing speed: 12,000 sheets/hour - Maximum sheet size: 365 x 520 mm - Minimum sheet size: 100 x 148 mm or 148 x 100 mm - Maximum print area: 350 x 510 mm - Blanket size: 500 x 520 x 1.9 mm - Plate size: 400–410 x 510 mm - Dampening roller (film dampening): 1 unit (62mm) - Number of ink form rollers: 4 units (46, 48, 52, and 54 mm) - Maximum feeder pile height: 850 mm - Maximum delivery pile height: 360 mm - Electrical connection: 3-phase 200 VAC 50Hz (primary); transformer included for conversion from 3 x 415/400/380/230 VAC to 200 VAC - Total power consumption: 7kW - Primary fuse: min. 20A - Dimensions LxWxH: 2765 x 1523 x 1560 mm Kdsdpjv Nv Tasfx Adkel - Net weight: 4000 kg

Kondisi: baru, Tahun pembuatan: 2023, Nominal pressing force: 1,000 kN Ram stroke, adjustable in steps: 16...140 mm Ram adjustment: 90 mm Throat depth: 295 mm Stroke rate at idle: 70 / min Tool installation height at maximum stroke (bottom) and adjustment (top): 420 mm* Kdodpsdulidefx Adksl Table clamping area (W x D): 1,050 x 660 mm Ram clamping area (W x D): 640 x 460 mm Pin bore in ram: 65 H7 mm Main motor power: 7.5 kW Machine height approx.: 3,085 mm Machine weight: 8,500 kg With hydraulic overload protection, fully automatic ram adjustment, semi-automatic stroke adjustment, latest accident prevention regulations (UVV compliant)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), gaya penekanan: 1 t, lebar meja: 200 mm, panjang meja: 230 mm, lebar total: 400 mm, tinggi total: 860 mm, berat keseluruhan: 105 kg, tekanan udara: 6 batang, FCP-C 10 kN pneumatic press, single unit for sale Manufacturer: FCP-C Pressing force: 1 t Stroke: 75–100 mm Air pressure: 0.2–0.5 MPa Working height: 320 mm Two-hand operation Table size: 200 x 230 mm Shaft diameter: φ15H9 mm x depth: 35 mm Speed regulator Kdodpfx Adov E Sazeksl Low-friction roller Rotary stop lever Height: 880 mm Length: 360 mm Width: 400 mm Weight: 105 kg

Kondisi: siap digunakan (bekas), -----Konica Minolta Accurio Press C 6100 avec 4,5 millions d'impressions----- Testée et prête à l'emploi ! Équipement : - IC 604 - FS 532 - RU 518 - PF 707m En tant que revendeur expérimenté de copieurs d'occasion, nous avons développé une véritable expertise dans l'emballage et l'expédition sur palette, afin de garantir à nos clients des machines en parfait état à la réception. Nous expédions des copieurs provenant de Konica Minolta France et entretenus par leurs soins. Si vous avez la moindre question, n'hésitez pas à me la poser. Kedpfxjwx Iiws Adkedl Notre société propose la gamme la plus large de copieurs de production Konica Minolta, et gère les livraisons à l’international sur demande. N'hésitez pas à nous contacter pour toute information complémentaire.

Kondisi: siap digunakan (bekas), Konica Minolta Accurio Press C 4080 avec 1,2 million de copies----- Testée et prête à l'emploi ! Équipement : - IC 609 - FS 532 - RU 518 - PF 707m - HT 511 - UK 112 - UK 220 - DF 713 En tant que revendeur expérimenté de copieurs d’occasion, nous avons développé une réelle expertise dans l’emballage et l’expédition sur palette, afin de garantir à nos clients des machines en parfait état à la réception. Nous expédions des copieurs provenant de Konica Minolta France et entretenus par eux. Si vous avez la moindre question, n’hésitez pas à me contacter. Ksdewx Imcjpfx Adkodl Notre société propose la gamme la plus large de copieurs de production Konica Minolta et gère les livraisons dans le monde entier sur demande. N'hésitez pas à nous contacter pour de plus amples informations.

Kondisi: siap digunakan (bekas), -----Konica Minolta Accurio Press C 3080 avec 1,4 million de copies----- Testée et prête à l’emploi ! Équipements : - DF 706 - PF 707 m - HT 506 - IC 417 - VI 509 - RU 510 - FS 532 - SD 510 En tant que revendeur expérimenté de copieurs d’occasion, nous avons développé une réelle expertise dans l’emballage et l’expédition sur palette, afin de garantir que nos clients reçoivent des machines en parfait état. Nous expédions des copieurs provenant de Konica Minolta France et entretenus par leurs soins. Si vous avez des questions, n’hésitez pas à me les poser. Kdjdpfswynkkex Adkjl Notre société propose la gamme la plus large de copieurs de production Konica Minolta et gère les livraisons dans le monde entier sur demande. Merci de nous contacter pour toute information complémentaire.

Kondisi: siap digunakan (bekas), -----Konica Minolta Accurio Press C 6100 avec 4,3 millions d’exemplaires au compteur----- Remarque : la machine est livrée avec des accessoires supplémentaires non visibles sur la photo (LU 202 XL et SD 513 / 513f) Testée et prête à l’emploi ! Équipement : - IC 604 - FS 532 - RU 518 - PF 711 - LU 202 XL - SD 513 / 513 f En tant que revendeur expérimenté de copieurs d’occasion, nous avons acquis une véritable expertise en matière d’emballage et d’expédition sur palette, afin de garantir à nos clients des machines en parfait état à la réception. Nous expédions des copieurs provenant de chez Konica Minolta France et entretenus par eux. Si vous avez des questions, n’hésitez pas à me contacter. Ksdpfx Aswx Ihmsdkjdl Notre société propose la plus large gamme de copieurs de production Konica Minolta et assure également les livraisons dans le monde entier sur demande. N’hésitez pas à nous contacter pour toute information complémentaire.

Kondisi: bekas, Pressing force: 50 t Throat depth: 265 mm Stroke: 250 mm Installation height: 400 mm Table clamping surface approx.: 700 x 450 mm Ram clamping surface approx.: 550 x 300 mm Table height above floor: 850 mm Rapid traverse down: 32 mm/s Working speed: 6.3 mm/s Rapid traverse up: 42 mm/s Power requirement: 4 kW Dimensions (LxWxH): 1290 x 1160 x 2085 mm Machine weight approx.: 1.75 t Standard features Kedpfxjwyplce Adkjdl Siemens S7-1200 control, working mode, inching mode, foot switch, mechanically adjustable stop, light barriers Automation Robotic automation with HORST robot optionally available on request.

Kondisi: bekas, Tahun pembuatan: 1972, nomor mesin/kendaraan: 1171, Total pressing force: 160 t Throat depth: 350 mm Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Installation height (stroke bottom, adjustment top): 740 mm Table clamping area approx.: 1000 x 680 mm Ram clamping area approx.: 600 x 300 mm Strokes per minute: 50 min-1 Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment Machine includes: - Safety fence HS Decoiler M 15 / 500 - Year of manufacture: 2009 Material width: 15 - 500 mm Coil weight: 1.5 t Coil outer diameter: 1400 mm Coil inner diameter: 380 - 530 mm HS Straightening machine RME 40 - 9 - Year of manufacture: 2009 Kedjuqdwxjpfx Adkodl Material thickness: 0.4 - 2 mm Number of feed rollers: 2 pieces Number of straightening rollers: 9 pieces Straightening roller diameter: 61.9 mm Feed roller diameter: 61.9 mm Feed speed: 40 m / min Feed length: 0 - 9999.99 mm Additional equipment The machine was retrofitted with SIEMENS S7 in 2009.

Kondisi: bekas, Tahun pembuatan: 1971, nomor mesin/kendaraan: 7130, Total pressing force: 60 t Throat depth: 275 mm Ram stroke: 5 - 100 mm Installation height (stroke down, adjustment up): 375 mm Table clamping area approx.: 740 x 470 mm Strokes per minute: 14 - 100 min-1 Power requirement: 10 kW Dimensions (LxWxH): 2,300 x 1,500 x 3,000 mm Kodpfx Adjuqcxnjkodl Machine weight approx.: 3.5 t

Kondisi: bekas, Tahun pembuatan: 1970, Pressing force: 30 t Throat depth: 160 mm Adjustable ram stroke: 20 - 45 mm Ram adjustment: 10 / 60 mm Shut height (stroke down, adjustment up): 220 mm Table clamping surface approx.: 470 x 300 mm Ram clamping surface approx.: 250 x 190 mm Strokes per minute: 80 - 240 min⁻¹ Power requirement: 4 kW Dimensions LxWxH: 1,400 x 1,800 x 2,000 mm Kdjdpfx Ajuqc Ensdkol Machine weight approx.: 2.67 t Standard equipment The electrical system on the machine was modernized in 2015.

Kondisi: bekas, Tahun pembuatan: 1983, nomor mesin/kendaraan: 5154, Total pressing force: 25 t Throat depth: 250 mm Ram stroke: 6 - 60 mm Ram adjustment: 50 mm Installation height (stroke down, adjustment up): 190 mm Kedpfx Aeuqc Hfedkodl Clamping plate thickness: 50 mm Table clamping surface approx.: 500 x 400 mm Ram clamping surface approx.: 350 x 250 mm Clamping pin bore in ram: 40 H7 mm Strokes per minute: 160 min-1 Dimensions (LxWxH): 1,300 x 1,500 x 1,995 mm Machine weight approx.: 2 t Additional features: Tilting press body

Kondisi: baru, Pressure: 125 t Slide Adjustment: (automatic adjustment) 40 mm Stroke Length (max.): 10–125 mm Total Power Requirement: 11 kW Weight approx.: 8,000 kg Dimensions (LxWxH): 1,800 x 1,500 x 2,600 mm Technical Data Press Force: 125 t Strokes per Minute: 50 spm Table Size: 900 × 700 mm Slide Size: 700 × 500 mm with pin hole Kodpsktm N Dofx Adkedl Stroke Adjustment: 20 – 125 mm Slide Adjustment: 40 mm Shut Height: 475 mm Accessories & Features Control System: Siemens S7-1200 PLC Operator Screen: 9” Siemens Touch Panel Precise stroke adjustment directly via display Adjustment of min. & max. stroke rate Automatic central lubrication Safety PLC: PILZ or Siemens Dual-channel safety architecture in control cabinet Safety light barriers: SICK, PILZ, or LEUZE (Category 4, CE-compliant) 2 rupture plates included in scope of delivery Lower support plate for secure transport Anti-reach protection for maximum occupational safety Pneumatic clutch & brake combination The machine stands out due to its exceptionally comprehensive standard configuration at the highest technical level. The use of branded components such as Siemens, PILZ, and SICK ensures maximum reliability and durability.

Kondisi: baru, Pressure: 150 Slide adjustment: (automatic adjustment) 40 mm Stroke length (max.): 10-125 mm Total power requirement: 15 kW Approx. weight: 9500 kg Dimensions (LxWxH): 1800 x 1500 x 2600 mm Strokes per minute: 50-90 Machine and equipment in accordance with CE regulations Light sensors: SICK or PILZ PLC control: Siemens S7-1200* Stroke adjustment: directly via the control panel Balancing system: integrated Speed adjustment: via Mitsubishi frequency inverter Machine frame: full steel construction Guide: internal and external eccentric guidance Crankshaft: made of hardened steel 4140 Clutch & brake: pneumatic combination Safety valve: two-way system Safety control (Safety PLC): SICK or PILZ Operation: two-hand as well as foot pedal operation possible Lubrication: automatic lubrication system Overload protection: hydraulic Safety device: safety enclosure for the working area External connections: 8-pin I/O at the PLC (for signal exchange & expansions) Vibration damping: rubber mats under machine feet (1 set – 4 pieces) Voltage/Frequency: 400 V / 50 Hz Fuse: 32 A required Standards: machine and equipment according to CE directives Control unit: 19-inch Siemens touchscreen Technical data: - Operation: jog mode / single stroke / continuous stroke - Pressing force: 150 t - Table size: 750 x 1000 mm (fixed table) - Stroke length: 10-125 mm, automatic stroke length adjustment via PLC - Ram plate: 500 x 800 mm (Ø 55 mm pin reception & T-slots as per customer specifications) - Strokes: 50 – 90 /min - Motor: 15 kW (1400 rpm) - Throat depth: 325 mm - Installation height: 475 mm to 295 mm - Pin hole in ram: 50 mm - Length: 1,800 mm - Width: 1,500 mm - Height: 2,600 mm - Weight approx.: 9,500 kg Ksdpfetqwtdjx Adksdl - Slide adjustment: 40 mm (automatic adjustment)

Kondisi: sangat baik (bekas), Here we offer you a TOX Press-in Machine TOX-C Frame Press. TOX Pressotechnik Press-in Machine TOX-C Frame Press Pneumohydraulic manual workstation with process monitoring for the pressing-in of functional elements. Kedpfjhhil Tox Adksdl Technical Data: - Press type: EMB 030.068.A.001 - Drive: KWE3O.0O.17O.10H - Pneumatic connection: G3/4'' - Compressed air conditioning: filtered and dried compressed air, max. particle size 40 µm - Working air pressure: Pmin. = 3.0 bar, Pmax. = 6.0 bar - Pressing force: 170 kN - Total stroke / short stroke: 170 mm / 10 mm - Control: STE 326-366-3/4"-90-230V/AC special complete - Electrical connection: 90-230V/AC - Operating ambient temperature: Tmin. = 10°C, Tmax. = 60°C - TOX press-in monitoring: EPW 500FP force / displacement measurement - Hold-up device ZHE for TOX press - Insertion dimensions: width 1917.5 mm, height 2506 mm, depth 1917.5 mm - Protective fence/light curtain: Leuze B20/B21 - Press-in tooling: see pictures 15 to 18 - Press-in sleeve (picture 17): 24.5 mm ∅ - Area of application/use: press-in operations - Weight: 2200 kg - Type: EMB 030.068.A.001 - Condition: used Scope of delivery: (see picture) (Specifications and details are subject to change and error!) For further questions, we are happy to assist you by phone.

Kondisi: bekas, Single-column Eccentric Press KRUPP Type PEKRD 125 h Machine No.: 2861 Year of manufacture: 1977 Pressing force: 125 t Throat depth: 400 mm Table size: 950 x 750 mm Ram area: 800 x 540 mm Kdsdpfx Ajdzqddedkel Table opening: 100 x 250 mm Stroke adjustment: 8 to 160 mm Ram adjustment: 100 mm Shut height, max. stroke up: max. 550 mm Strokes per minute: 60 spm Table height above floor: 800 mm Motor power: 10 kW Power supply: 380 Volt, 50 Hz - Hydraulic overload protection in ram - Pneumatic clutch-brake combination ORTLINGHAUS - Ram counterbalance cylinder - Motorized ram adjustment - Table plate with ball rollers - Two-hand operation - Central lubrication system HELIOS - Stroke counter - UVV 7n 5.1 §4a, paragraph 2 no. 3b for manual loading operations Required floor space L x W x H: 2300 x 1800 x 3200 mm Weight: approx. 10 t Good condition (very little used)