Beli Hidroliksan Pers Pelurus - Kolom Ganda bekas (23.115)

Tahun pembuatan: 1978, Kondisi: bekas, Press force 2000 / 1000* t Column distance 2650 mm Stroke 500 mm Side opening between columns 500 x 1000 mm Plunger diameter 710 mm Number of pressure cylinders 2 Distance table / ram 1000 mm Operating pressure 130 / 230 bar Overall height 800 mm Table length 2500 mm Table width 1600 mm Table height 250 mm Return force 500 kN Number of T-slots 8 Spindle speed 1500 rpm Lrjdpfx Aled Ih Ncj Nsp Rapid traverse speed 120 - 140 mm/min Closing speed max. 120 - 140 mm/sec Ram return via small separate cylinder 100 - 110 mm/sec Hydraulic ram locking Noise suppressor 300 t Cushion force 200 t Cushion stroke 250 mm Cushion speed 100 mm/sec Frequency 50 Hz Voltage 380 V Oil volume 2000 l Total power requirement 93 kW Machine weight approx. 100 t Space requirement approx. 5000 x 2500 x 7200 mm Transport dimensions approx. 6500 x 3750 x 2190 mm *Conversion: 1991 installation of a drawing cushion, new nameplate due to pressure reduction – PO 1000: Machine is currently limited to 1000 tonnes (Reason: tools were only rated for 1000 tonnes) The press ran flawlessly until it was dismantled and replaced by a press line. Important for accident prevention regulations (UVV): The press is equipped with a hydraulic ram locking system!

Kondisi: bekas, Pressing force 200 t Distance between uprights 1600 mm Maximum ram stroke 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm Ram surface area 1600 x 1300 mm T-slots DIN 650 / 22H12 Rapid traverse 400 mm/s Lrodog S R Twopfx Al Nsp Return speed 325 mm/s Pressing speed 42 mm/s at 40% Pressing speed 20 mm/s at 100% Drawing cushion force 800 kN Drawing cushion stroke 150 mm Drawing cushion speed up 68 / down 225 mm/s Retrofit year 2001

Kondisi: bekas, Tahun pembuatan: 1991, 1 Lsdpfx Aeyq Swhol Njrp

Kondisi: bekas, Pressing force: 35 t Outreach: 220 mm Stroke: 10 - 120 mm Stroke rate: 120 strokes/min Ram adjustment: 50 mm Table area: 590 x 440 mm Ram area: 460 x 160 mm Total power requirement: 2.2 kW Machine weight approx. 2.5 t Space required approx. W 0.88 x D 1.2 x H 1.95 m Equipment: - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work is carried out in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack testing, new seals and V-belts - New paint finish: Light Grey RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front hood - New control cabinet with ABB safety control and touch display Control via touchscreen mounted on the front of the control cabinet, Cabinet positioning (cable length) as agreed with the end customer, Standard 0.8–1.0 m beside the machine, incl. new wiring of the press - Foot switch - Two-hand control - Current safety inspection (UVV) with brake time measurement After the modernization is completed, the machine is approved for manual loading operations with open tools. Lrodpfx Asykb Dqol Nop

Kondisi: bekas, Tahun pembuatan: 1979, en: Technical details: Pressing force: 250 t Ram stroke: 40–160 mm Throat depth: 545 mm Ram adjustment: 110 mm Table size: 1250x800x100 mm Maximum distance between table and ram: 670 mm Drawing force: 16 t Table height above floor: 1000 mm Ram clamping surface: 900x670x100 mm Clearance between uprights: 500x400 mm Total power requirement: 23 kW Machine weight approx.: 16.6 t Machine dimensions: 2.8x1.4x3.7 m Control cabinet dimensions (LxWxH): 1.15x0.6x2.1 m Lredpfx Aleu Nfine Nop Drawing device: Ejector and blank holder force each 16 t Table with 4 parallel T-slots (1250x800x100 mm) Ram plate with 4 radial T-slots Accessories: - Steel plate 1170x860x80 mm

Kondisi: bekas, Tahun pembuatan: 1981, Technical details: Pressing force: 250 t Ram stroke: 36...126 mm Throat depth: 400 mm Ram adjustment: 110 mm Ram surface area: 630 x 500 x 100 mm Installation height: 400 mm Table size: 1000 x 750 x 100 mm Lsdpfeu Nfklox Al Norp Table height above floor: 1000 mm Total power requirement: 23.0 kW Approx. machine weight: 13.5 t Control cabinet dimensions (LxWxH): 1.1 x 0.7 x 1.3 m Approx. machine dimensions (LxWxH): 3.0 x 1.3 x 3.3 m Additional features: - Operation via two-hand control stand with foot pedal - 4 base plates Ø 220 mm

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: - Pressure: 100 t - Stroke: 20 mm fixed - Strokes per minute: 55 spm - Throat depth: 355 mm - Ram bore: Ø 36 mm - Table surface: 900x640 mm - Ram adjustment: 150 mm - Ram clamping surface: 500x415 mm - Height above floor: 800 mm - Maximum distance between table and ram: 390 mm - Table through-hole: Ø 330 mm - Total power requirement: 11 kW - Machine weight approx.: 7.5 t - Machine dimensions approx. LxWxH: 1.46x1.58x2.57 m - Transport dimensions LxWxH: 1.9x1.6x3.1 m The press is supplied without machine control cabinet (optional installation possible). Complete electric individual drive for 3x 380 Volt, 50 Hz Lrodpeu Nfizjfx Al Nop Belt and ram guards Friction clutch and brake unit PRESSMATIC

Kondisi: bekas, Tahun pembuatan: 1969, en-GB:Technical details: Pressing force: 40 t Throat depth: 220 mm Stroke: 10 – 120 mm Ram adjustment: 63 mm Strokes per minute: 160 spm Distance table/ram: 300 mm Table size (LxW): 440 x 620 mm Passage hole in table: Ø 200 mm Ram clamping surface: 400 x 250 mm Machine weight approx.: 2.52 t Machine dimensions approx. (LxWxH): 1.5 x 1.2 x 1.3 m A clamping plate (LxW: 440 x 620 mm) with a centre bore Ø 100 mm is mounted on the table. A steel plate 380 x 325 x 27 mm is mounted on the ram. The press is equipped with two-hand operation. fr-FR:Détails techniques : Pression : 40 t Profondeur de col de cygne : 220 mm Course : 10 - 120 mm Réglage du coulisseau : 63 mm Nombre de courses : 160 coups/min Distance table/coulisseau : 300 mm Dimensions de la table (Lxl) : 440 x 620 mm Ouverture traversante dans la table : Ø 200 mm Surface de bridage du coulisseau : 400 x 250 mm Poids de la machine env. : 2,52 t Dimensions de la machine (LxlxH) env. : 1,5 x 1,2 x 1,3 m Une plaque de bridage (Lxl : 440 x 620 mm) avec un alésage central Ø 100 mm est montée sur la table. Une plaque en acier de 380 x 325 x 27 mm est montée sur le coulisseau. La presse est équipée d'une commande bimanuelle. es-ES:Detalles técnicos: Presión: 40 t Lsdpfx Asu Nfkxel Njrp Cuello de cisne: 220 mm Carrera: 10 - 120 mm Ajuste del émbolo: 63 mm Carreras por minuto: 160 cpm Distancia mesa/émbolo: 300 mm Tamaño de la mesa (LxA): 440 x 620 mm Agujero pasante en la mesa: Ø 200 mm Superficie de sujeción del émbolo: 400 x 250 mm Peso de la máquina aprox.: 2,52 t Dimensiones de la máquina aprox. (LxAxH): 1,5 x 1,2 x 1,3 m En la mesa hay una placa de sujeción (LxA: 440 x 620 mm) con agujero central de Ø 100 mm. En el émbolo está montada una placa de acero de 380 x 325 x 27 mm. La prensa cuenta con control bimanual.

Kondisi: bekas, Tahun pembuatan: 1981, Technical Details: Pressing force: 30 t Clear width between uprights (WxD): 600/450 mm Installation height, table/ram top: 650 mm Ram stroke: approx. 600 mm / high-speed strokes Table size (LxW): 500 x 700 x Ø 60 mm Clamping surface of ram: 650 x 800 mm Hydraulic pressure: 170 bar Required air pressure: 4 - 6 bar Total connected load: 11 kW Machine weight approx.: 2.0 t Machine dimensions approx. (LxWxH): 1.26 x 1.75 x 3.4 m Four-column press, hydraulic Deburring press Lodpsu Nfmaofx Al Nerp Possible application: may be used as a deburring press Additional technical features: - Table opening: 200 x 250 mm - Ram opening: Ø 160 mm - Gap in uprights: width 600 mm, depth 450 mm - Operation via control panel Equipment: - Safety guard - Base plates

Kondisi: bekas, Tahun pembuatan: 1997, Technical details: Pressure: 160 t Column spacing: 1000 mm Stroke: 250 mm Installation height: 600 mm Distance table/ram: 600 mm Table height above floor: 550 mm Table surface: 810 x 860 mm Ram clamping area (D x W): 720 x 580 mm with T-slots Total power requirement: 15 kW Machine weight approx.: 16.0 t Machine is not yet assembled. Pictures are from the sales location. Additional features: - Lateral passage (W x H): 520 x 620 mm - Front passage (W x H): 660 x 600 mm Equipment: - Walk-on platform = height above floor approx. 2400 mm; platform approx. 2700 x 2600 x 1050 mm - Hydraulic unit - Oil cooler as per description. Lrjdpfxou Nfmms Al Nsp

Kondisi: bekas, Technical details: Press force: 250 t Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Pass-through opening in table: 400 x 360 mm Ledpou N Ddwsfx Al Norp Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Accessories: - Base plate 2200 x 1500 x 40 mm

Kondisi: bekas, Tahun pembuatan: 1980, Technical details: Pressing force: 400 t Stroke: 40 - 140 mm Lrjdpfx Asu N A Uuel Njp Continuous strokes/min: 32 Throat depth: 400 mm Installation height min/max: 450/590 mm Ram adjustment: 125 mm Table size: 1250 x 750 mm Height above floor: 1130 mm Total power requirement: approx. 31.5 kW Machine weight approx.: 23.0 t Machine dimensions (LxWxH): 3.7 x 1.7 x 3.9 m Control cabinet dimensions (LxWxH): 1.0 x 0.7 x 2.1 m Additional features: - Clamping plate (LxWxH): 1260 x 760 x 100 mm - With drawing device, force 250 kN, stroke approx. 83 mm - Operation via control panel - No UVV (accident prevention regulations) - As is

Kondisi: bekas, Tahun pembuatan: 1980, fi Lrodpfxsu N A U Is Al Nsp

Kondisi: bekas, Tahun pembuatan: 1990, Technical details: Pressure: 63 t Frame opening: 200 mm Stroke: 150 mm Installation height: 430 mm Strokes per minute: 400 spm T-slots H 12 650: 18 mm Table through-hole: 420 x 160 mm (W x L) Ram surface: 650 x 450 mm Control: Wanske Tronicpress CNC Clearance between uprights: 550 x 540 mm Tank capacity: 200 l Fixed ram stroke: 100 mm Ram diameter: 40 mm Table height above floor: 1000 mm Table: 600 x 450 mm Table height above floor with anti-vibration mounts: 880 mm Total power: 30 kW Machine weight approx.: 3.9 t Hydraulic punching press for precision work (high-speed press) - Suitable for punching, drawing, pressing, coin minting, bending, riveting, straightening, assembling - With hydraulic gripper feed unit type HS 150 and 7-roller straightening unit (synchronized) - Suitable for standard strips of approx. 0.4 mm - 2.5 mm thickness x approx. 160 mm width, as well as narrow strips up to approx. 4 mm thickness. Feed length can be freely adjusted via the control system. - With ram round column guide - With automatic central lubrication - High-speed: up to 400 strokes per minute - Motor-driven adjustable fixed stop (manually/motor-driven adjustable from below) - Operating modes: continuous stroke and/or single stroke Equipment: - 1x hydraulic power unit - 2x control cabinets Condition: Punch press has a control issue. Ledpfx Aleu Icxqe Nerp Sale as is, as a donor for spare parts or as a replacement machine. In stock. *

Kondisi: bekas, Detail Teknis: Tekanan: 90 t Jangkauan: 320 mm Jumlah langkah: 90 langkah/menit Tinggi pemasangan: Meja/ram atas: sekitar 380 mm Penyetelan ram: maks. 65 mm Permukaan ram: 600x55 mm Pelat clamping pada meja: 800x640x80 mm Lsdpfx Asu Nfg Hsl Nerp Jalur lewat: 260x160 mm Pengaturan langkah: 60 mm tetap Kebutuhan daya total: 5,5 kW Berat mesin sekitar: 4500 kg Kebutuhan ruang sekitar: P:1,8xL:0,82xT:2,42 m - Langkah tunggal/berkesinambungan - Pemeriksaan rutin dilakukan, direkondisi tahun 2010 - Saat ini tanpa panel kontrol, tanpa sistem kendali, tanpa tangki udara tekan

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Pressure: 100 t Stroke: 20 mm fixed Strokes per minute: 55 spm Lsdpfxou Nfi Uj Al Nsrp Table surface: 900x640 mm Throat depth: 355 mm Ram adjustment: 150 mm Ram bore diameter: Ø 36 mm Ram clamping surface: 500x415 mm Height above floor level: 800 mm Max. distance between table and ram: 390 mm Passage hole in table: Ø 330 mm Total power requirement: 11 kW Machine weight approx.: 7.5 t Transport dimensions LxWxH: 1.9x1.6x3.1 m The press is supplied without a machine control system/control cabinet. (Optional installation possible) Complete electric single drive for 3x 380 Volt, 50 Hz Belt and ram guard PRESSMATIC friction clutch and brake unit

Kondisi: bekas, Tahun pembuatan: 1969, Technische_Details_DE_001 Ledpfxexu Dwmj Al Njrp

Tahun pembuatan: 1997, Kondisi: bekas, Rincian teknis: Tekanan: 250 t Langkah: sekitar 400 mm Lebar celah: 640 mm Ljdpfxsu Nfn Re Al Norp Tinggi meja dari lantai: 900 mm Kecepatan ram: dapat diatur Celah pada penyangga samping: 470 mm Area penjepit meja (P x L): 570x550 mm Area penjepit ram: 570x550 mm Kebutuhan daya total: 56 kW Berat mesin sekitar: 9,0 t Dimensi mesin (P x L x T): 2,5x1,8x3,8 m Dimensi transportasi (P x L x T): 2,6x1,8x3,1 m - Kontrol manual dan otomatis melalui PLC Allen Bradley - Pengoperasian satu tangan dan dua tangan - Panduan ram empat-kolom, bebas kelonggaran - Pengaturan dan mode otomatis dikendalikan PLC (saat ini tidak berfungsi) - Tirai cahaya tipe Sick dan tirai pengaman terpasang - Tidak ada penandaan CE termasuk.

Kondisi: bekas, Technical Details: Pressure: 200 t Stroke: approx. 200 mm Table size: L:1200 x H:450 mm Jaw width: 1000 x 200 mm Total power requirement: 18 kW Machine weight approx.: 15 t Machine dimensions (LxWxH): 4.5 x 1.5 x 2.2 m Carrier Straightening Press, Eccentric-type Bending Machine Lrodpfxeu Nfrps Al Nop - Jaw holder (LxW): 1200 x 220 mm - Jaw adjustment: 200 mm travel - Jaw opening width: 300 mm - Manual operation - Electrical cabinet (LxWxH: 0.85 x 0.8 x 2.7 m) Accessories: - Various stops, inserts, stop angles, and scribers as per inventory.

Kondisi: bekas, Detail teknis: Tekanan: 80 t Jarak antar kolom: 880 mm Ketinggian pemasangan: 200 mm Ukuran meja: 880x300 mm Tinggi di atas lantai: 1000 mm Jarak antar kolom: 800 mm Kebutuhan daya total: sekitar 12 kW Berat mesin kira-kira: 2855 kg Kebutuhan ruang: P:1,4xL:1,65xT:1,9 m PRESS EMBOSSING - PUNCHING - Hot press (press pemanas) Area penggunaan: - misal untuk film, plastik, kertas, hardboard, dll. - Ukuran pelat stempel: 600x310 mm Perlengkapan: - Counter - k - Catu daya 380/415 V / 50 Hz Aksesori: - Pelat penahan untuk matris (600x300x90mm) tidak dapat dipanaskan. Lrodpfju Icwtjx Al Njp Dijual apa adanya.

Kondisi: bekas, Detail teknis: Tekanan: 160 t Overhang: 760 mm Langkah ram: 32...140 mm Jarak meja/ram: 400 mm Penyesuaian ram: 100 mm Jumlah langkah: 50 langkah/menit Meja: 760x1000x95 mm Lubang tembus di meja: 400x350 mm Luas permukaan pemasangan ram: 630x850 mm Pelat pemasangan: 760x1010x92 mm Kebutuhan daya total: 15 kW Berat mesin kurang lebih: 6,2 t Dimensi mesin (PxLxT): 2,9x1,2x3,4 m Dimensi panel kontrol (PxLxT): 0,8x0,45x2,1 m Lrodpsu Nfhqjfx Al Nep Pengoperasian dengan kendali dua tangan Mesin dapat didemonstrasikan sesuai permintaan. i.D. *

Kondisi: bekas, Detail teknis: Tekanan: 80 t Tinggi instalasi: 600 mm Langkah penekan: 200 mm Tekanan: 30 t Tinggi instalasi: 680 mm Langkah penekan: 300 mm Jarak antar rangka: 1060 mm Area penjepitan pelat dasar: 1060x600 mm Tinggi meja dari lantai: 720 mm Kecepatan penekan: Penekan/ Ram 1: 40 mm/dtk Kecepatan penekan: Penekan/ Ram 2: 95 mm/dtk Area penjepitan pelat dasar: Dm=150 mm Kebutuhan daya total: 13 kW Berat mesin sekitar: 4,5 t Kebutuhan ruang sekitar: P:1,6xL:1,1xT:3,4 m PRES PEMASANGAN - Pres dengan dua penekan 30t + 80t - Pengoperasian dengan pedal kaki Ledpfx Aeu Nfnwjl Nsrp Pres tersedia untuk dijual di Leipzig, sesuai deskripsi, siap dikirim.

Kondisi: baik (bekas), Tahun pembuatan: 2010, nomor mesin/kendaraan: F3554, Penawaran 25228 Mesin gergaji pita horisontal hidrolik dengan dua kolom pemandu Data teknis: - Proses kerja otomatis, pemotongan, pengangkatan/penurunan hidrolik - Bingkai gergaji naik/turun secara hidrolik, otomatis pengumpan material hidrolik - Ukuran pita gergaji: 4400 x 34 x 0,9 mm - Kecepatan pemotongan, dapat diatur tanpa tingkat: 15 – 88 m/menit - Pengaturan tekanan pemotongan tanpa tingkat: 10 – 15 bar - Kecepatan penurunan: 0 – 300 mm/menit - Kapasitas potong pada 90°: - Bulat: 360 mm Ledpfx Alswvrvis Norp - Persegi/datar: 360 x 430 mm - Penjepitan material hidrolik - Otomatis pengumpan material hidrolik - Sistem pendingin - Daya penggerak: 400 V / 3 kW - Kebutuhan ruang: kurang lebih L 2200 x T 1850 x D 1300 mm - Berat: kurang lebih 1100 kg - Roller table: 2000 mm

Kondisi: baik (bekas), Tahun pembuatan: 1991, Hydraulic horizontal straightening and bending press Maximum pressing force: 160 t Lodpfxscffzao Al Nsrp Manufacturer: MAE, Model: HY RI 160 RH, Year of manufacture: 1991. For further technical data, see data sheets.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 29.081 h, Fungsionalitas: berfungsi sepenuhnya, CNC control system HEIDENHAIN TNC 640, 15" Main Computer MC Controller Unit CC Keyboard TE 15" TFT color flat panel display with softkeys RAM: 4 GB Hard Drive: 32 GB, at least 21 GB reserved for program storage Input increment / Display step for linear axes: up to 0.1 µm Input increment / Display step for rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation on 3 axes with rotated machining plane Helical interpolation Linear interpolation on 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enabling buttons / deadman’s switch according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / cross axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / Power connection / Pneumatics Max. feed rate with interpolating axes: 40 m/min Installed power: 60 kVA Max. current draw: 150 A Air consumption (pneumatics): 400 Nl/min Operating pressure (pneumatics): 6 bar Clamping plate / Floor plate Integrated clamping plate with leveling units Plate size: 2,500 x 4,000 mm Plate height: 300 mm Load capacity: 10 t/m² T-slot width: 28 mm (H12) T-slot spacing: 250 mm Milling head / Universal milling head Universal milling head with continuous movement on 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining possible up to 10° Integrated cooling for torque motors and spindle bearings Lrjdpfx Aoyrndmjl Njp C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. rotational speed A-/C-axes: 30 rpm Working torque A-/C-axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning uncertainty A-/C-axes: 8 arcsec Positioning scatter A-/C-axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for motorized spindle Software / Calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measurement of 3D shapes, tools, molds, and dies Measurement program creation directly via coordinate points / surface points Vibration / Collision monitoring Sensor for vibration detection Detection of collisions and excessive oscillations on 3 axes Response time approx. 1 ms Electronic interface for functionality check Tool changer Tool changer with arm for tool change Overlapped-wheel design Fully enclosed for operator safety Tool stations: 80 Max. tool diameter: 75 mm Max. tool diameter with adjacent slots free: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for remaining 40 tools Tool type: HSK-A63 DIN 69893