Beli Keppler Hdc2000 Mit 2Fach Palettenwechsler bekas (10.080)

Kondisi: baik (bekas), • Type: GS - 250 Gbodpfergqp Nsx Ap Dor • Serial no.: 14 • Year of manufacture: 1999 • Min. dimensions: L1100mm x W800mm x H900mm • Max. dimensions: L1700mm x W1300mm x H900mm • Power supply: 1 x 220V / 50Hz / 7.8 A • Connected load: 1500W / 2800 rpm – 1 kW • Price on request

Kondisi: bekas, berat muatan maksimum: 12.050 kg, berat keseluruhan: 18.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 09/2004, panjang ruang muatan: 7.300 mm, lebar ruang muat: 2.450 mm, tinggi ruang muatan: 2.090 mm, Perlengkapan: ABS, tail lift,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Godpsh R Taqsfx Ap Dobr Detailed description: - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels Gjdjmhhy Nspfx Ap Djbr - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 85-70, Magnet Overband Self-cleaning dengan Rangka Cocok untuk lebar konveyor 1200 mm. Panjang kerja 1470 mm x lebar kerja 645 mm. Gsdsx Tid Eepfx Ap Dobr

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Technical details: SEW Motor Type: DV132H8/4BH/HF/TH r/min: 700/1450 IP:54 Hz: 50 400V AC Gsdpfxowu Dbbo Ap Debr Brake: 400V Weight: 83.94 kg The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor is characterized by its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table enables flexible and precise control of motion sequences, making it particularly suitable for manufacturing and assembly applications.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25MythoSarya05, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally Gjdpfx Apoykuh Ns Dsbr TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: N2104796, GEM F470 AUTOMATIC CARTON SEALER WITH AUTOMATIC FLAP CLOSING FOR UNIFORM CARTON SIZES incl. centering unit and Siemens S7 PLC control CARTON DIMENSIONS: - Length: min. 150 mm – max. 600 mm - Width: min. 100 mm – max. 520 mm - Height: min. 100 mm – max. 670 mm TECHNICAL DATA: Gsdpeykugxsfx Ap Dsbr - Siemens S7-1200 PLC control - Centering unit RCC500 infeed - Vertical drive and guide belts - Carton size adjustment manual - Sealing units for bottom and top - Standard version T22 / T23 - Tape width from 50 to 50 mm, depending on the unit used - Adjustable tension - Max. tape roll diameter 360 mm - Tape roll core diameter 76 mm - Power supply 400 V, 3-phase, N, PE – 50/60 Hz - Power consumption 0.25 kW - Protection rating IP54 - Operating temperature +5°C to max. +35°C - Conveyor speed 22 m/min - Average output 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm: 2,470 x 990 x 1,782 H - CE-compliant safety guard: Side sheet metal covers with access door, supplemented with infeed doors (L 850 mm), upper and lower covers. Image may show optional equipment subject to surcharge.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS06, Demonstration Unit ATLANTA NEOS Stretch Wrapper ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film power stretch: 120–400% Motorized pre-stretch system with stepless adjustment Adjustable pre-stretch ratio from 120 to 400% via control panel Film application tension electronically controlled via control unit Quick-load system (IEF) for easy film roll change Film specifications: max. outer diameter Ø300 mm – height 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah each, connected in series Minimum 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Max wrapping height (machine with mast, incl. pallet): 2,150 mm Height detection via photoelectric sensor or manual input on display Protective rail for emergency stop of drive unit Emergency stop switch according to CE regulations Acoustic warning signal and warning light at machine start Fall protection for film carriage Start & Stop push buttons Machine operation complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All functional parameters adjustable via display - Display lock for program modification - Adjustable machine speed around the pallet up to 80 m/min - Carriage ascent and descent speed individually adjustable - Ascent speed: 1.3 – 5.4 m/min - Descent speed: 1.3 – 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Adjustable wrapping height - Film application tension for base/top wrap, ascent/descent independently adjustable - Film pre-stretch for base/top wrap, ascent/descent independently adjustable Gbedpfx Apeyktv Sj Der - Ergonomic height for film roll change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrapping (upward/downward) - Simple wrapping (only up or only down) - Wrapping cycle with defined start and stop heights - Wrapping to a stored height (disabling height sensor) - Wrapping cycle for large pallets - Wrapping cycle for top sheet application - Soft-start cycle for installing edge protection - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or powered rope formation (optional) Other machines available immediately from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" Gbedpfx Apoykud Rj Der FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm - 200mm, suitable for loading with electric pallet truck and forklift – height adjustable Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet) 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable upwards/downwards Acoustic signal at wrap start and at cycle end Emergency stop switch according to CE regulations Turntable always stops in start position Drop protection for film carriage Pushbutton (Ø 22 mm) for machine power-on as well as start & stop functions according to CE standards ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F02 – Continuously variable turntable speed 5–12 rpm Carriage speed upwards and downwards independently adjustable F03 – Carriage speed upwards: 1.3 to 5.4 m/min F04 – Carriage speed downwards: 1.3 to 5.4 m/min F05 – Number of revolutions at pallet base (1–10 wraps) F06 – Number of revolutions at pallet top (1–10 wraps) F09 – Pallet wrapping height setting F62 – Ergonomic height for film change ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Single wrapping (only upwards or only downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a preset height (photoelectric sensor deactivated) F29 – Soft start cycle for application of edge protection Soft start to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard supply connection: 230 V – 1L+N+PE – 50 Hz Total connected load: 1.2 kW / 6A Gedpeykuhcefx Ap Debr Further units available from stock immediately.

Tahun pembuatan: 2021, jam operasional: 10 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S21MythoEasyLow04, Demo machine - like new. MYTHO EASY Low Very low-profile system in height Wrapping height: 2400 mm Turntable diameter: 1650 mm LP flat turntable: 30 mm flat, 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Gedpfxsx Ta Nxe Ap Debr Automatic, adjustable double-rope formation - see pictures. Automatic cutting Optional: film clamp on the turntable German Schuko plug 6 individually programmable programs Additional demo units immediately available from stock. Prices ex stock Ludwigsburg

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Godpfx Apsyktrto Dobr Wrapping height 2450 mm 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Gbedpfxeykub Ae Ap Djr Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in several steps via programs Turntable height: 75 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage lifting speed up/down Acoustic signal at wrapping start and at end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in home position Fall protection for film carriage Push button for machine power-on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE OPERATING PANEL All functional parameters adjustable via display F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage travel speed up and down adjustable independently F03 – Carriage ascent speed from 1.3 to 5.4 m/min F04 – Carriage descent speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Photo cell wrapping height delay F13 - F16 – Film tension for bottom & top wrapping / ascending & descending can be set independently F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT THE OPERATING PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (up/down) F01-2 – Simple wrapping (up or down only) F01-3 – Push button for manual functions F10-F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated for height) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for corner protection application F30-F31 – Reinforced wrapping cycle with adjustable number of wraps Soft start to reduce film breakage on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Options available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photo sensor for black products Cutting device etc. Further machines available ex stock Ludwigsburg. Some images may show optional equipment subject to surcharge. Illustration similar

Kondisi: bekas, 7 collet sizes: 7-9-10-12-16-18-20 mm Gjdpobn Rpiofx Ap Dobr

Tahun pembuatan: 1992, Kondisi: belum diuji (bekas), Carrier bag machine and double net clipper, manufacturer: Strapack, suitable for apples and potatoes, 1-5 kg possible. The machine is in very good condition and was in operation for only about 10 years. The machine features 4 carriages, making it capable of producing approximately 15 - 20 bags of 2 kg per minute. The machine is ready for operation and comes with all accessories. It has been fully overhauled. Price on request. I also sell SPARE PARTS for EW20, EW10, and NET CLIPPER UC20. For enquiries, please contact Gjdpfxohh Idrj Ap Dobr

Kondisi: baik (bekas), 1x Arburg 320C 500-170 dengan Multilift, pagar pengaman, dan konveyor penyimpanan. Dijual tanpa konveyor Z, alat tempering, dan hisap Koch. Mesin dapat tersedia dalam waktu singkat sesuai kesepakatan. Gbjdsyym Sajpfx Ap Der

Kondisi: baru, Tahun pembuatan: 2025, Delivery every Monday, Tuesday – RELIABLE! 3-fold segmented bending machine with foot operation EU production Folding bench with foot operation Segmented upper beam, lower beam, and bending beam - Precision-ground bending segments - Segments with triple guidance for easy and quick adjustment - Folding bench with complete foot control - Piano key segments in the upper, lower, and bending beams provide a wide range of bending possibilities - Upper, lower, and bending beams segmented (piano key design) - Segments are adjustable and removable - Precision-ground bending segments made from extremely tough and hard special alloy steel - Bending beam is effortless to operate thanks to a heavy-duty pressure spring/shock absorber - Heavy and robust construction for decades of operation - Convenient opening and closing of the upper beam Technical Data: - Max. working width: 1400 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 295 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm Gsdpfx Apjc I T Txe Dobr - All three beams equipped with segment jaws (full segmentation) - End stop for pre-set bending angles - Degree scale - Free clearance: 100 mm Transport rollers included. Nationwide shipping within Germany: 180 euros SCRIBING TEMPLATE FREE OF CHARGE! We issue invoices with 0% VAT (intra-community supply) as well as with 19% VAT. We look forward to your inquiry!

Kondisi: baru, Tahun pembuatan: 2025, PROD-MASZ sheet metal bending machines, folding benches, and guillotine shears leverage the precision of CNC technology. This range is designed for industrial applications, ensuring every product stands out with outstanding durability and ruggedness, regardless of working conditions. The specifications comply with strict technical standards and stringent CE regulations, with adherence to EU requirements providing the best proof of the equipment’s quality. Additionally, the entire range is covered by a 12-month warranty. Versatile, high-performance, heavy-duty, and exceptionally robust segmented folding bench – this is no standard folding machine, but one that’s significantly stronger and more durable. A segmented folding bench is distinguished by full segmentation along the entire 1.40 m working length. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into individual segments. Bending angle adjustable from 0 to 155 degrees. Clamping is foot-operated, keeping both hands free for optimal sheet metal positioning; opening and closing also by foot control. The bending beam is fitted with two gas pressure dampers for exceptionally smooth and easy operation. Gbodpfxec Swhyo Ap Dsr At the rear of the machine there is a practical segmented tool box. Technical data: - Max. working width: 1,400 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 300 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - Three beams equipped with segment jaws (fully segmented) - Adjustable stop for preset bending angles - Degree scale Price: €5,700 Swivel castors included Delivery time: weekly Cash payment on delivery Delivery cost: €180 We look forward to your inquiry!

Kondisi: sangat baik (bekas), Interroll roller conveyor 0.99m with drive The Interroll conveyor section is in very good condition. Additionally, the conveyor features its own drive motor. Width: 400mm Length: 990mm Godpohvmi Tofx Ap Djbr Complete factory closure, wide range of mezzanine floors, pallet racking, shelving systems, vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! International shipping costs upon request!

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 3.000 h, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, For sale as a complete package: Waterjet cutting machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area 3000x1500mm. High-pressure pump Ecotron 40.37, year 2013 Water softening system, year 2018 --> as new condition Abrasive backflushing system, year 2013 Column-mounted slewing crane Abus 2t, year 2018 --> as new condition Gbjdpjyq Rdyjfx Ap Dsr Vacuum lifting system Devo-Tech, load capacity 1800kg --> as new condition Various accessories. Several sandbags The system was acquired at the end of 2018 and commissioned at the beginning of 2019. At that time, the waterjet system and pump had been completely overhauled by the supplier. Unfortunately, the cutting system was rarely used in our company. It was run only a few hours per year. Not in operation since around July 2025. The high-pressure pump is defective; it is not leak-proof and is losing water. Both high-pressure cylinders were replaced in recent years. The last service was in 2025. According to the service engineer, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and the vacuum system can also be purchased separately. Please send an offer with your price expectation. New price in 2019 for crane and vacuum equipment was approx. CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected but has been drained and cleaned. Please send registrations or offers by email, not by phone.

Tahun pembuatan: 2011, jam operasional: 15.000 h, Kondisi: bekas, berat keseluruhan: 18.000 kg, tinggi konstruksi: 3.650 mm, lebar produk (maks.): 2.520 mm, nomor mesin/kendaraan: 366931, tipe mesin: Diesel, pabrikan: Mercedes-Benz Gbedpfx Ajzt Uikep Djr

Kondisi: bekas, Tahun pembuatan: 2018, Mesin Bekas Mesin pelapis tepi bekas dari Holz-Her, model Sprint 1329 Performance, dilengkapi dengan sistem pengembalian dari Barbaric, model RTS 01. Mesin pelapis tepi: Tahun pembuatan: 2018 Jembatan rol dengan motor, model 1329 PERFORMANCE iTronic – Sistem kontrol tekanan dan jumlah lem adaptif, penyetelan halus otomatis yang bergantung pada program Penggaris masuk, standar B20 mm Penggaris masuk untuk pengumpanan benda kerja yang presisi Kontrol Edge Control 19 dengan layar sentuh berwarna 18,5", rasio 16:9 Unit pemotong alur 1802 (2 x 2,0 kW, 200 Hz, 1.200 rpm) dengan 2 unit pemotong untuk menyambung tepi panel. (1 unit berputar searah jarum jam, 1 unit berputar berlawanan arah jarum jam) Pengumpan tepi 1901 SYNCHRO, pengangkutan otomatis bahan gulung dan strip Stasiun aplikasi lem Glu Jet GJ301, otomatis (2,3 kW, 50 Hz) Unit penekan 1913, bermotor, 1 rol digerakkan, 2 rol penekan tambahan Sistem penyemprot (agen pelepas) setelah unit penekan dengan 2 nozel penyemprot untuk pelapisan hingga ketinggian kerja 60 mm Unit pemotong 1918 (60 mm), pneumatik (2 x 0,45 kW, 12.000 rpm), dapat diputar secara pneumatik 0/10° Unit pemotong FR701, akurasi pengulangan 100% dengan sekali tombol, berkat mekanisme tanpa kelonggaran Unit pemotong profil FF701, akurasi pengulangan 100% dengan sekali tombol, berkat mekanisme tanpa kelonggaran Gbsdpfxezt Twts Ap Djr Unit pisau penarik 1929 MOT4, termasuk paket poles, dengan penyetelan motor pada rol penekan Pisau penarik permukaan FK701 dengan penyesuaian awal dan akhir untuk menghilangkan sisa lem Penyetelan motor pada penggaris masuk untuk pengumpanan benda kerja yang presisi ke unit pemotong alur Pelumasan rantai otomatis / Sistem pelumasan rantai pengangkutan otomatis yang cerdas Wadah penampung GLU JET Sistem penyemprot 1856 untuk area masuk dan keluar: Unit pemoles 1940 (2 x 0,12 kW, 50 Hz, 1.400 rpm) Untuk pembersihan dan pemolesan tepi. Dilengkapi dengan 2 cakram tekstil, rentang putar 0 - 5° Koneksi sistem RETURN (sirkuit pemutus darurat) Koneksi pengembalian benda kerja ke kontrol HoLZ-HER Dimensi mesin sekitar 5600 x 1010 x 1900 mm Berat mesin sekitar 2100 kg Sistem Return: Tahun pembuatan: 2018 Nomor mesin: 2180122-206 Detail lebih lanjut dapat dilihat di PDF. Ketersediaan: berdasarkan kesepakatan Lokasi: Röllbach

Kondisi: bekas, jarak tempuh: 764.869 km, daya: 353 kW (479,95 hp), pendaftaran pertama: 11/2013, jenis bahan bakar: diesel, berat kosong: 15.900 kg, berat muatan maksimum: 10.025 kg, berat keseluruhan: 26.000 kg, konfigurasi gandar: 3 gandar, inspeksi berikutnya (TÜV): 11/2026, rem: retarder, kabin pengemudi: kabin harian, tipe perpindahan gigi: otomatis, kelas emisi: Euro 5, suspensi: baja-udara, jumlah tempat duduk: 2, Perlengkapan: ABS, derek, kendali jelajah, komputer bawaan, kunci diferensial, pendaftaran truk, pendingin udara, rem angin bertekanan,

Kondisi: bekas, Tahun pembuatan: 2019, Mesin Bekas Tahun Pembuatan 2019 Video dapat dilihat di: Mesin dasar - Dynestic 7535-R Otomatis 12.7 Meja Dynestic Untuk pemrosesan nesting klasik dengan pelat aus Panjang pemrosesan 3700 mm Arah kerja dari kanan ke kiri Rangka mesin dengan konstruksi las dengan panduan prisma yang digiling dan diperkeras untuk rangka bergerak, kepala agregat, dan konsol Rangka bergerak dalam desain gantry Penggerak rak dan pinion, miring, pada arah X dan Y, Spindel ulir bola arah Z untuk pemosisian yang presisi Data Teknis: Dimensi pemrosesan: Beban maksimum pada meja nesting X = 3700 mm Y = 2200 mm Jarak perjalanan maksimum X = 5295 mm Y = 2935 mm Z = 565 mm Ketinggian overhang maksimum meja DYNESTIC Z = 250 mm dari tepi atas meja (tanpa pelat aus) Kecepatan pemrograman maksimum Kecepatan vektor: 128,0 m/menit X = 80 m/menit, Y = 100 m/menit, Z = 25 m/menit Tudung penyedot debu 4 tingkat dengan penyesuaian ketinggian pneumatik dan jendela pengintai Tegangan 400 V, 50/60 Hz PENGENDALI: Prosesor Dual-Core Sistem operasi Windows XP Hard disk 80 GB / Memori 1 GB Koneksi jaringan RJ45 10/100 Base-T Fast Ethernet Keyboard AS dan mouse Microsoft IntelliEye (optik) Drive CD-ROM / CD-RW (CD burner) Pemeliharaan jarak jauh Kartu jaringan terintegrasi untuk transfer data dari data kontrol dan program. Transfer data dilakukan melalui koneksi internet berkecepatan tinggi Persyaratan: Koneksi internet berkecepatan tinggi pada mesin. Meja DYNESTIC Meja pemrosesan tetap dan kontinu dengan pembagian kisi, alur kontinu pada arah X dan Y, Jarak antar alur 50 mm dengan tali penyegel 25 meter untuk menjepit pelat aus 1 bidang pemrosesan dengan palang penahan / penahan Tinggi 30 mm, dapat diturunkan secara pneumatik Masing-masing 2 palang penahan pada arah Y dan 1 penahan pada arah X (kanan) (dilihat dari tepi depan mesin) Bidang vakum Sistem vakum 1 sirkuit Agregat pengeboran 7881-R, 24 spindel Daya penggerak 3,0 kW, termasuk agregat gergaji 18 spindel vertikal dapat diakses secara individual Susunan dalam bentuk L, 11+2 pada arah X dan 6 pada arah Y Kisi 32 mm Diameter pengeboran maksimum: 35 mm Panjang total bor: 70 mm dari ujung pemasangan (tergantung pada ketebalan pelat) Langkah spindel: 70 mm Arah putaran: Putaran kanan / kiri secara bergantian n(max.) 1000 - 5710 rpm dapat diatur secara stepless Pemasangan: Ulir M 10 - dudukan pas 11 mm tanpa alat, tanpa pemasangan 6 spindel horizontal 2 spindel pengeboran ganda pada arah X (Jarak 32 mm antara spindel pengeboran horizontal 1 dan 2) 1 spindel pengeboran ganda pada arah Y Pemasangan: Ulir M 10, dudukan pas 11 mm Panjang total bor maks. 70 mm dari ujung pemasangan tanpa alat, tanpa pemasangan Gedpfxozt Twyj Ap Dsbr Pendorong tekanan, peningkatan tekanan standar dari 6 menjadi 8 bar Agregat pemotong 5 sumbu 7844, Daya: 10,0 kW (S6) dapat diputar, sumbu C +/- 360°, sumbu A +/- 180° n(max.) = 0 - 24000 rpm dapat diatur secara stepless, daya maksimum pada 12000 rpm hingga 24000 rpm Pendingin cairan (agregat pendingin termasuk) dengan dudukan alat HSK-F 63 dengan mur ulir yang meningkat ke kanan (untuk alat yang berputar ke kanan) dengan chuck collet dengan tangkai HSK Bantalan bola keramik (bantalan hibrida) Berat alat maksimum 6 kg (termasuk pemasangan) Alat: