Beli Linyi Jianzhong Wood Macihnery Linyi Jianzhong Wood Macihnery Jjc-Cp bekas (7.270)

Kondisi: baru, Tahun pembuatan: 2026, Shredder with Conveyor Belt ♻ Universal Application Podetpwh Sopfx Anwogl (suitable for various types of wood, pallets with nails and staples, chipboard, waste and offcuts, veneer, MDF panels, cardboard, plastics, textiles, etc.) ♻ An integrated shredding system with conveyor belt and magnetic separator provides a comprehensive solution for material handling and cleaning. ♻ The system consists of a high-performance shredder capable of processing a wide range of materials, a conveyor belt that evenly distributes the shredded material and ensures continuous material flow for further processing or disposal, and a magnetic separator that efficiently removes ferromagnetic particles, increases material purity, and prevents equipment damage. Technical Data Shredder Power: 30 kW Shaft length: 870 mm Shaft diameter: 270 mm Speed: 80–120 rpm Number of cutting knives: 2×19 Granulate size: 10–50 mm Capacity: up to 7 m³/h* Fill opening: 1446 × 1565 mm Weight: 2,050 kg Z-Conveyor Belt Frequency converter (for conveyor speed control) Overband magnetic separator Length: 6,500 mm Width: 350 mm Capacity: 0.5 kg/s Power: 0.25 kW Transport rollers Warranty 1 year warranty or 1,000 operating hours

Kondisi: bekas, Tahun pembuatan: 1995, Technical details: Punching force: 25 t (250 kN) Podpfx Aeu Szfuonwogl Pass-through width: 1800 mm (1660 mm usable) Clear opening between uprights max./min.: 155 / 25 mm Stroke: Punching stroke: 130 mm Total power requirement: 5.0 kW Machine weight approx.: 2.0 t Dimensions LxWxH: 2.3 x 1.0 x 2.2 m Hydraulic rail punching machine Hydraulic pressure: 250 bar Punch table area = 1830 x 500 mm Punch carriage/plate = 500 x 500 mm; Travel speed = 800 mm/sec; Punch stroke = 63 mm/s, Forward/reverse travel 125/125 mm/sec. Operation via control panel with pressure switch/control lever Equipment: 2x pneumatic feed rollers Ø 120 x 1630 mm, pneumatically operated open/close

Kondisi: baru, Wood Briquetting Press Amis ABP 60 L Pgsdpfou R Sxxjx Anwol -Exhibition Machine- ----- Technical Data ----- Briquette Ø: 60 mm Hydraulic Unit: 3 kW, 140 bar Voltage: 400 V Frequency: 50 Hz Circuit Protection: 16 A Output approx.: 20–35 kg/h Weight approx.: 300 kg - Extremely simple operation - Hydraulic control system - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as controllers, sensors, or complicated controls - Large feed hopper - Hardened briquette tongs - Replaceable pressing rod - Pressing without the need for additives - Thanks to the pre-compressor, even voluminous shavings can be processed - No adjustments or monitoring of pressure required - new exhibition machine -

Kondisi: baik (bekas), 6 Pgsdpfx Ajy Um N Ujnwsl

Kondisi: sangat baik (bekas), Catalogue no. 7321 TECHNICAL DATA - Max. workpiece height: 90 mm - Max. workpiece width: 130 mm From above: - Slip conveyor belt - Sanding units: 2 brushes - Brush motors: 2×0.55 kW - Brushes adjustable manually up/down From below: - Feed conveyor belt - Sanding units: 2 brushes - Brush motors: 2×0.55 kW - Brushes adjustable manually up/down From the side: - Sanding units: 2 brushes - Brush motors: 2×0.55 kW Pedpfoy Tkhxjx Anwogl - Brushes adjustable manually up/down, front/back + angle - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via frequency inverter - Stepless adjustment of feed belt speed - Feed motor: 0.55 kW - Extendable workpiece support from table - Extraction port diameter: 3×120 mm - Overall dimensions (L/W/H): 2200×1200×1400 mm - Weight: 672 kg ADVANTAGES – Italian production – 6 sanding units – Used sander – Very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas), Dari tahun 2018, 15 kW, dengan hopper dan kontainer PM 32-E (32 m3) serta perangkat tipping. Podsyti Ipopfx Anwegl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, de-001 Pgsdpfey Diahox Anwel

Kondisi: sangat baik (bekas), Bruks 602 CS Mesin Chipper Drum - Ukuran bukaan masuk: 540 x 300 mm - Diameter drum: 600 mm - Jumlah pisau: 2 - Ketebalan kayu maksimal: 180/100 mm - Daya motor utama: 26 kW - Daya motor kipas: 11 kW - Kapasitas: hingga 20 m³ serpihan/jam - Panjang serpihan standar: 20-35 mm - Berat bersih: 1400 kg - Produsen: BRUKS (Swedia) Kondisi: telah diuji, kondisi siap pakai Konveyor juga tersedia Psdpfoxmbidox Anwogl

Kondisi: baik (bekas), de-to-hu-001 Pedpfey Tlduex Anwjgl

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, panjang total: 11.000 mm, RAPID Maschinenbau TIPE: RSE, SERI 1005, TAHUN 1997 Berfungsi. Digunakan untuk pemotongan rumah rangka kayu dan komponen rangka atap sederhana -Rentang putar horizontal dari 15° kiri ke 15° kanan, ditampilkan pada layar -Rentang putar vertikal dari 40° kiri ke 90° kanan, ditampilkan pada layar -Batas panjang kanan, ditampilkan pada layar -Dokumentasi dalam bahasa Jerman + panduan kalibrasi dan reset -Pengoperasian dua tangan -2 silinder penekan vertikal + 2 silinder penekan horizontal -Konveyor rol kiri, panjang sekitar 4000 mm -Konveyor rol kanan, panjang sekitar 6500 mm -Tekanan udara kerja min 6.5 bar +Selain itu, sistem filter industri EUROPAC CT-101, tahun 2008 - kotak merah pada foto tidak termasuk youtube.com/shorts/pj_alOG0Xpo?si=MLVmkJXTL_xWzoif Silakan hubungi untuk pertanyaan/harga Podpfey Exxvsx Anwjgl

Kondisi: seperti baru (mesin pameran), en-demo-unit-with-7-operating-hours-another-machine-available-im mediately-ex-works-neckartailfingen-shredder-mrz-830-customs-tari ff-number-84659600-infeed-opening-800x1000-mm-motor-185-22-kw-400 -v-50-hz-3-ph-blades-reversible-multiple-times-hydraulically-actu ated-pusher-screen-size-as-selected-10-40-mm-weight-approx-1600-k g-dimensions-lxwxh-approx-2290-x-1420-x-1750-mm-turbo-clutch-stan dard-features-include-automatic-star-delta-start-fast-hydraulics- auto-shutdown-when-rotor-idles-rotation-speed-70-90-rpm-for-high- throughput-cycle-control-to-avoid-downtimes-performance-enhancing -step-control-for-hydraulic-pusher-pertinax-guides-for-hydraulic- pusher-vibration-damping-machine-feet-ce-compliant-the-shredder-i s-designed-for-the-size-reduction-of-untreated-wood-chipboard-and -mdf-panels-other-materials-upon-testing-and-approval-by-the-manu facturer-included-30-cm-higher-machine-frame-prepared-for-conveyo r-belt-optional-shredder-accessories-angled-conveyor-belt-eur-877 0-net-horizontal-section-1200-mm-inclined-section-2500-mm-angle-a djustable-0-60-degrees-discharge-height-approx-2000-mm-+-100-mm-o verband-magnet-eur-6780-net-conveyor-and-overband-magnet-control- eur-2750-net-start-and-stop-synchronously-with-shredder-raw-mater ial-requirements-moisture-content-absolutely-dry-must-be-below-30 -metals-and-mineral-contaminants-such-as-sand-stones-etc-lead-to- increased-wear Pjdpov Sqrpsfx Anwegl

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jam operasional: 55 h, Machine with Special Rotor Available immediately Advantages: Psdex Af Rdspfx Anwsgl + Special rotor with reduced knife projection, suitable for hard and soft materials + 22 kW motor + Effective square knives *For pallets: up to max. 10 pallets per hour *Performance depends on screen and material. Considerably higher throughput for smaller wood residues. Motor: 22 kW; 400 V – 50 Hz – 3 phases Screen: 15/20 mm or as agreed (options from 10 to 40 mm available) Hydraulically operated ram Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: actual unit color may vary Weight: 1920 kg Standard features included: - Control cabinet with PLC control - Automatic star/delta starter - High-speed hydraulics - Automatic switch-off when rotor idles - Speed 70-90 rpm for high throughput - Cyclic feed control to prevent idle times - Step logic for increased hydraulic ram performance - Pertinax guides for the hydraulic ram - Vibration-dampening machine feet - CE compliant The following options are available at extra cost: - Raise shredder by 30 cm (for conveyor preparation) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control system for conveyor and overband magnet + €2,750 net (starts/stops synchronously with the shredder) - Flared feed hopper 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material must be free from metals and mineral contaminants. Tool damage and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Customs tariff code: 84659600 Feed opening: 800 x 1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase Knives: multiple reversible edges Hydraulically operated pusher Screen perforation as required (10 - 40 mm) Extraction nozzle Ø 200 mm Weight: approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Turbo clutch Pgedped Dgw Uefx Anwol Standard features included: - automatic star-delta starting - high-speed hydraulics - automatic stop if rotor idles - Speed: 70-90 rpm for high throughput - Pulse control to avoid idle times - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant . The shredder is designed for shredding natural wood, chipboard, MDF panels and other materials (subject to trial and approval by the manufacturer) . Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Angled conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable 0-60 degrees Discharge height: approx. 2000 mm ±100 mm - Overbelt magnet + €5,980 net - Control for conveyor belt and overbelt magnet + €2,750 net (start and stop each synchronized with the shredder) . Raw material requirements: - Moisture content (dry matter) must be below 30% - Installation temperature: temperature-controlled room at at least +5°C - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear

Kondisi: baru, Tahun pembuatan: 2025, The ideal machine for shredding hardwood and softwood Another machine available immediately (ex works Neckartailfingen) - Motor: 18.5 kW; 400 V - 50 Hz - 3 phase - Knives: 14+2 pieces, 40x40 mm, reversible multiple times - Rotor diameter: 260 mm - Control: Omron PLC - Cutting chamber opening: 600 x 800 mm - Hopper volume approx. 0.6 m³ - Hydraulically actuated ram - Screen perforation selectable (12 – 40 mm) - Extraction nozzle Ø 160 mm - Weight approx. 1,300 kg Pgodpfx Anjd E R D Sowel - Dimensions (LxWxH) approx. 1,737 x 1,167 x 1,650 mm The following options are available at an additional cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for segmented floor, 4-sided + €2,170 net (prevents the ram from jamming; recommended for materials less than 3 mm thick) - Shredder height increase by 30 cm (prepared for conveyor belt) + €1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Controls for conveyor belt and overband magnet + €2,750 net (synchronized start and stop with the shredder) - Special bearing + €1,540 (rarely needed; enclosed, even more durable rotor bearing. Worth considering for screens < 15 mm or for a high proportion of fines. Not necessary if bearings are greased every approx. 2 weeks in operation) Raw material requirements: - Moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear We would be happy to offer you a free trial with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Kondisi: baru, Tahun pembuatan: 2024, en-1 Pgodsd Hkqhopfx Anwel

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 8.400 h, jarak pergerakan sumbu X: 1.200 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 610 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, tinggi total: 2.880 mm, lebar total: 3.680 mm, beban meja: 1.800 kg, berat keseluruhan: 9.100 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 30.000 W, jumlah sumbu: 3, This 3-axis vertical machining center, Quaser MV-204 CP, was manufactured in 2007. It features a working area with an X-axis travel of 1200 mm, a Y-axis travel of 700 mm, and a Z-axis travel of 610 mm. The machine is equipped with a sturdy table size of 1400 x 700 mm and a maximum table load capacity of 1800 kg. If you are looking for a high-quality milling machine, consider the Quaser MV-204 CP, which we are offering for sale. Contact us for further details. • Machine table: 1400 x 700 mm • T-slots: 6; width 18 mm; spacing 100 mm • Distance from table to spindle nose: 150–760 mm • Spindle type: WEISS WB-40R • Spindle torque: 192 Nm • 20 bar through-spindle coolant (IKZ) • Tool changer: 30 positions • Operating resources: compressed air 6 bar; voltage 400 V; circuit protection 63 A; connection cable cross-section 4 x 16 mm² • Usage/condition notes: • Spindle collision in 2018; spindle operates for plastics, but spindle condition should be checked • Machine has been out of operation for approx. 6 months due to new acquisition • Spindle hours: 8,400 Additional equipment • Coolant system with 600-liter tank • Chip conveyor • Heidenhain handwheel HR410 • Various milling chucks • Haimer shrink-fit chuck • Slimline basic holder for DuoBlock • Various ER collet holders (without collets) • Albrecht drill chuck • Haimer dial gauge • Complete machine documentation Technical Specification Taper size BT 40 Pedpfx Aneyw S Diewsgl

Kondisi: bekas, Tahun pembuatan: 1995, Mesin konstan - Stasiun kombinasi, sikat debu - perangkat pengukur ketebalan - sepatu amplas elektronik individual MCS sistem Weber 32 mm - rol kalibrasi baja beralur - peniup sabuk - karpet vakum. Lebar pengamplasan: 1100 mm. Daya penggerak: 15 kW. Daya feeding sekitar 1,1 kW. Pengaturan ketinggian 0,25 kW. Dimensi sabuk amplas: 1150 x 2500 mm. Ketebalan benda kerja maksimal: 150 mm. Lebar mesin: 1700 mm. Panjang mesin: 2000 mm. Tinggi mesin: 2160 + 150 mm. Berat mesin: 1900 kg. Tinggi kerja konstan: 850 mm. Diameter port ekstraksi: Sabuk 180 mm / Sikat 120 mm. Volume udara ekstraksi: 0,74 m³/s. Daya terpasang: 23 kW. Tekanan udara terpasang: 7 bar. Kecepatan feeding: 3–15 m/menit. Jam operasi: 7000 jam. Lokasi penyimpanan: Nattheim. Pgodjx Twcpepfx Anwel

Kondisi: bekas, Filter system, extraction unit, clean air extraction unit SCHUKO Type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal airflow 1451 m³/h Vacuum 1398 Pa Filter area 18 m² Psdpfer R Ewlex Anwjgl Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Connection 400 Volt, 50 Hz - equipped with 24 filter bags (Ø 160 mm, length 1500 mm) - mechanical filter cleaning via vibrating motor - 2 discharge pipes at the bottom for dust collection bags, Ø each 500 mm, reduced to Ø 300 mm - dry fire line with C-hose connection, fire department connection for filter fires - differential pressure switch for filter contamination detection - without control unit (no control present) - mounted on 4 steel tube legs (square tube 40x40 mm) Overall height shown in pictures: 3050 mm Required space L x W: 1850 x 1000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic shavings.

Tahun pembuatan: 2021, Kondisi: sangat baik (bekas), Italian-made BIGonDRY wood drying kiln 3 chambers – each: - width: 9.6 m - length: 7.5 m - gate height: 4 m Pgedpfx Anovkxmfswjl Each chamber holds approx. 100 m³ – total capacity 300 m³ Kilns have only been used for trial runs – virtually like new. Offered as a complete set, with full documentation, automation system, laptop, and internet connectivity for remote operation.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SH12005, Untha LR 630 Shredder Operating Hours: 1 h Demonstration Machine Machine No.: SH12005, Year: 2024 Article Number: JA_G250303 Description Podsv Tbqlepfx Anwegl Feed Opening: 624 x 792 mm Hopper Volume: 0.43 m³ Rotor Diameter: 248 mm Rotational Speed: 98 rpm Power Supply: 400V/50 Hz, 18.5 kW Knives: 17 pieces Screen Hole Size: 15-20 mm Suction Connection: 160 mm Weight approx.: 1300 kg Dimensions (W x D x H): 1740 x 1220 x 1670 mm Cable Harness: 3 m + Connection for screw discharge Errors and technical specification changes excepted. Note – New Machine: • Prices are ex-works (unless otherwise stated) from our site in Ottendorf-Okrilla/Germany – free loaded! (unless otherwise specified) • Subject to prior sale! • You will receive an invoice including VAT. • Buyers may inspect the items on site. • Our general terms and conditions apply. • Special arrangements are only valid if confirmed in writing. • Items visible in the background of images are not included in delivery. • Saw blades are for illustration purposes only and not included in delivery. Shipping Options: • We are happy to provide you with a shipping quote. • Collection from Ottendorf-Okrilla by arrangement is free of charge. (Setup and operational briefing for demonstration purposes is optionally available by prior arrangement!) • Optionally, our trained service personnel can install the machine at your site and provide a brief introduction. Travel, transport, and service times at extra cost.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, jam operasional: 1.100 h, Fungsionalitas: belum diuji, berat keseluruhan: 2.200 kg, jumlah bilah: 42, diameter rotor: 260 mm, WEIMA WL 6 – Single-Shaft Shredder for Wood Waste, Year of Manufacture 2007, only approx. 1,100 Operating Hours Podsy U Nu Tjpfx Anwegl For sale is a used WEIMA WL 6 single-shaft shredder (wood shredder/chipper) from WEIMA Maschinenbau GmbH, Ilsfeld. The machine comes from an active production environment and is in good external condition considering its age. Special feature: The operating hours meter shows only approx. 1,100 hours – with a manufacturing year of 2007, this equates to an average use of just around 60 hours per year. Rotor, bearings, and drive train are therefore expectedly very minimally worn. The machine is equipped with an automatic feed conveyor unit for continuous material infeed. The upper cover is removable—allowing for manual feeding as well. The separate electrical cabinet is fully included and professionally assembled (Moeller/Eaton contactors, motor protection switch, safety relay, Siemens S7-200 basic PLC). The machine was decommissioned after removal from production and has not been put back into operation since. Inspection on site in Lennestadt (NRW) available at any time by appointment. Technical data: Manufacturer: WEIMA Maschinenbau GmbH, Ilsfeld Model: WL 6 Year of manufacture: 06/2007 Operating hours: approx. 1,100 hrs (read from meter) Motor power: 18.5 kW Voltage: 400 V / 50 Hz Rotor speed: 90–100 rpm Rotor diameter: 260 mm Rotor length: 800 mm Max. number of knives: 42 pcs. Knife size: 40 mm Screen hole diameter: approx. 14.5 mm (measured) Grain size: adjustable 10–60 mm Infeed opening: 800 x 1,250 mm Extraction port: Ø 200 mm Length: 2,390 mm / Width: 1,390 mm / Height: 1,840 mm Weight: approx. 2,000 kg Feeding: Conveyor belt infeed (upper deck removable) Control: Control cabinet with Siemens S7-200, Moeller/Eaton contactors, safety relay More pictures available on request.

Kondisi: siap digunakan (bekas), de-01 Pgedpfjy Uydlex Anwol

Kondisi: sangat baik (bekas), Nomor katalog 7361 SPESIFIKASI TEKNIS - lebar inlet: 400 mm - tinggi inlet: 180 mm Podjy R A Ncjpfx Anwsgl - lebar poros: 430 mm - diameter poros: 430 mm - panjang pisau: 430 mm - jumlah pisau: 2 buah - ukuran saringan: 60x60 mm - 2 poros penggerak bergerigi bawah - motor poros bawah: 1,8 kW - 2 poros penggerak bergerigi atas - motor poros atas: 1,8 kW - konveyor sabuk - panjang sabuk pengumpan: 2200 mm - lebar sabuk pengumpan: 330 mm - motor utama: 22 kW - autoreverse - mode mundur - dimensi keseluruhan p/l/t: 4100x1350x1100 mm - berat: 1800 kg KEUNGGULAN – produksi Jerman – autoreverse (dapat diatur) – mode mundur – mesin pencacah bekas, kondisi sangat baik Harga netto: 66.900 PLN Harga netto: 15.920 EUR tergantung kurs 4,2 EUR (Harga dapat berubah seiring fluktuasi nilai tukar yang signifikan)

Kondisi: sangat baik (bekas), NOMOR KATALOG 7620 DATA TEKNIS - Lebar roll: 410 mm - Panjang meja: 2220 mm - Meja dari besi cor - Kedua meja dapat diatur - Panduan asli dari besi cor - Motor sekitar 3 kW - Dimensi (P/L/T): 2220x800x1140 mm Psdsy R Az Sepfx Anwsgl - Berat: 504 kg KEUNGGULAN – Produksi Jerman – Mesin jointer bekas – Kondisi sangat baik Harga netto: 6900 PLN Harga netto: 1640 EUR dengan kurs 4,2 EUR (Harga dapat berubah jika terjadi fluktuasi besar)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, Gergaji trimmer penuh - 21 mata gergaji, kecepatan trimmer 110-130 pcs/menit, dibongkar, disimpan, pernah digunakan di lini sortir hijau Podjw S Eylopfx Anwjgl