Beli Ops Ingersoll Ops 650 bekas (3.559)

Kondisi: bekas, 4 adjustable INGERSOLL clamping jaws for face plate Pedpfx Aju Axzkon Isra Chuck jaws for lathe chuck, mechanical clamping device, clamping block No.: 39.02.10000 / 501.397 Jaw width: 70 mm Jaw length: 180 mm Jaw carrier height: 150 mm Base plate: 325 x 265 mm - Stepped jaws reversible for use as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 slots 40 x 30 mm for fastening - Distance between slots: 280 x 133 mm and 220 x 90 mm (center-to-center) Dimensions (L x W x H): 325 x 265 x 215 mm Weight per jaw: 36.5 kg Total weight (all 4 jaws): 146 kg In good condition

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, tekanan: 12 batang, berat keseluruhan: 400 kg, tegangan masuk: 400 V, daya: 4,3 kW (5,85 hp), High-Performance Refrigeration Dryer / Air Dryer 22 m³/min Ingersoll Rand Model: TS220 SS Year of manufacture: 2003 Air flow: max. 22,000 l/min Maximum pressure: 12 bar Refrigerant: 407C gas – 3.5 kg Mains voltage: 400 V, 50 Hz, 7.5 A Connection: DN80 Prjdporfyrpofx An Isa Machine dimensions: Length: 1010 mm Width: 1500 mm Height: 1310 mm Weight: 400 kg Ambient temperature: 2°C - 50°C Maximum inlet temperature: 60°C IP rating: IP 44 standard

Kondisi: baik (bekas), Tahun pembuatan: 1990, jenis arus masuk: tiga fasa, KUPER SHRINK TUNNEL DUPLEX Manufacturer: Küper Model: ST/I-1400 Year of manufacture: 1987 Serial number: 594 Working width: 1300 mm Roll holder: Yes Electrical connection: 400 V Overall height: 3500 mm Overall width: 2350 mm Overall depth: 1850 mm Incl. 2 air blow-off units Power: 59 kW Temperature range: 230 °C Continuous conveyor belt Conveyor speed: 5 m/min Duplex 2100/650 film feed station Pjdpfx Anskn Rz He Iora incl. film holder Swivel arm with chain hoist Sealing bar Length: 2100 mm "Siemens" control panel Overall dimensions: 3000 x 2000 x 2300 mm

Kondisi: bekas, Perlengkapan: filter jelaga,

Kondisi: bekas, Tahun pembuatan: 2003, farbe-grau-2003-diebels-specs Prodpfx Aneyr Rnno Iea

Kondisi: bekas, Tahun pembuatan: 2003, 1 Pjdpfsxu Achsx An Iora

Kondisi: bekas, Tahun pembuatan: 2015, 20 ft sea container fitted with a screw compressor system, equipped with 2 Ingersoll Rand R30I-A10 screw compressors, each rated at 30 kW. Prjdpfx Aowbf U Non Ioa

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, de-to-hu_it_lt_lv_nb_nl_pl Prsdpeyllaxsfx An Ija

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 18.254 h, Fungsionalitas: berfungsi sepenuhnya, Kompresor sekrup Ingersoll Rand R37IE-A 37 kW 7,5 bar 6,46 m3/menit Psdpfx Aew H Nwlsn Iera Tahun pembuatan: 2013 Jam operasi: 18.254

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 450 mm, model controller: CNC MITSUBISHI 32bit, TECHNICAL DETAILS X-axis travel: 550 mm Y-axis travel: 850 mm Z-axis travel: 450 mm Y-axis travel during electrode change and loading position: 1,180 mm Integrated C-axis, adjustable head rotation speed: 10/20 rpm Integrated C-axis, head measuring resolution: 0.001 mm Table dimensions: 850 x 550 mm Load capacity without changer: 50 kg Load capacity with changer: 10 kg Head load min.: 200 kg Distance from tool carrier plate to worktable max.: 585 mm Distance from tool carrier plate to worktable min.: 125 mm MACHINE DETAILS Controller: CNC MITSUBISHI 32bit Tank dimensions (W x D x H): 800 x 1,100 x 480 mm Dielectric fluid level programmable/automatic: 440 mm Filter cartridge type: integrated cartridges Prjdpfxeywguvs An Ija Electrode changer system / pick-up disc magazine positions: 20 Electrode weight per electrode: 15 kg Total changer load: 60 kg FP70 generator: ampere multipulse Electrode changer: 20-position pick-up linear changer Amperage: 70 A Dimensions & Weight Space requirement: approx. 2.4 x 2.65 x 2.68 m Machine weight: approx. 6,000 kg EQUIPMENT Electric hand control pendant Integrated CO2 fire extinguishing system / dielectric cartridge filter system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 525 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, lebar meja: 650 mm, For sale are 2 EDM machines from OPS Ingersoll, model Gentry Eagle 500 The machines are being sold from a production facility, are in very good condition, and are fully operational. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: by arrangement Travel distances: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm to Erowa) C-axis controlled (0.001 mm resolution) Electrode holder (spindle): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16 m² paper cartridge - Compressor - Recooling unit - Lowerable lift tank with automatic tank replenishment (ATA) - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Space requirements: 3,135 x 3,944 x 2,871 mm Options: - 4-position Power-Grip160 pallet carrier (not included in the price) - Various 4-position aluminum change pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional charge upon request. Prices excl. VAT Inspection available by appointment. Contact us – our team is happy to assist you. Trade-in or exchange possible! Psdexrpm Ujpfx An Iera Machine purchase / sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Kondisi: bekas, Tahun pembuatan: 1994, de Psdpfxjxcwx He An Iora

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Pengering refrigerasi INGERSOLL RAND Kapasitas: 13 m³/menit, Tahun produksi: 2010, Pengering dalam kondisi berfungsi penuh. Prjdeiuk D Djpfx An Isa

Kondisi: hampir baru (bekas), Tahun pembuatan: 2009, jam operasional: 100 h, Fungsionalitas: belum diuji, berat keseluruhan: 10.250 kg, panjang total: 5.000 mm, lebar total: 2.100 mm, tinggi total: 2.400 mm, daya: 530 kW (720,60 hp), jenis bahan bakar: listrik, tekanan kerja: 3 batang, Perlengkapan: Pelat tipe tersedia, Hersteller: Ingersoll Rand Modell: CH6-C125MX1 Baujahr: 2009 Seriennummer: V-7667 Betriebsstunden (laut Stundenzähler): Wenig gelaufen! Leistung (kW): 530 Spannung: 400 V Frequenz: 50 Hz Predsv A T Uhepfx An Ioa Drehzahl: 2980 U/min Stromaufnahme: 920 A Abmessungen (LxBxH): 5000 x 2100 x 2500 mm Gewicht ca.: 10.250 kg Gesamte Stückzahl auf Lager: 1 Kapazität: 7,66 Nm³/h Max. Betriebsdruck: 2,8 bar Herkunftsland: Italien Bemerkungen: Kompressor nahezu unbenutzt

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, laju aliran volumetrik: 12,88 m³/jam, INGERSOLL RAND R 75 N NIRVANA VSD rotary screw compressor Variable speed (inverter controlled) Motor: 75 kW Capacity: 12.88 m³/min Pressure: 10 bar Podow Dm Dwjpfx An Iera Year of manufacture: 2014 The compressor is fully operational.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Pengering Refrigerasi INGERSOLL RAND TMS 80 Psdpfx Asymmbton Iera Kapasitas: 8,2 m3/menit Tahun produksi: 2010 Pengering dalam kondisi sepenuhnya berfungsi.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 525 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, lebar meja: 750 mm, panjang meja: 650 mm, TECHNICAL DETAILS Design: Lift tank Internal dimensions (W x D x H): 770 x 670 x 440 mm Programmable/automatic dielectric height: max. 395 mm Work Table Support surface (W x D): 750 x 650 mm Load capacity: 1,000 kg Axes Travel X / Y / Z (within the work tank): 525 x 400 x 450 mm Y (for electrode change and loading position): 675 mm Control System PC-NC dialogue: 2 x 32 bit Drive type: digital AC servo motors Max. travel speed X, Y, Z: 5,000 mm/min High-speed jump max.: 18,000 mm/min Min. distance electrode clamping system to work table: 135 mm Prjdpfxsw T Tg Ne An Ija Max. distance electrode clamping system to work table: 585 mm C-Axis Adjustable rotation speed: 1-20 rpm Measuring resolution: 0.001 degrees Load capacity for manual electrode change: 50 kg Load capacity for automatic electrode change: 15 kg Holding torque/clamping: Yes Max. electrode moment of inertia: 0.4 kgm² MACHINE DETAILS Dimensions (W x H x D) with generator: 2,600 x 2,680 x 2,290 mm Required area with generator: 7.3 m² Machine weight: 4,360 kg Generator weight: 640 kg Power requirement: 16 kVA Fuse protection: 32 A Connection voltage/frequency: 400 V / 50 Hz Operating Time: 2,001 h

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 575650, jarak pergerakan sumbu X: 550 mm, jarak lintasan sumbu Y: 850 mm, jarak gerak sumbu Z: 450 mm, TECHNICAL DETAILS Design: Lifting tank Internal dimensions (W x D x H): 800 x 1100 x 480 mm Programmable/automatic dielectric fluid height: max. 450 mm WORKING HEAD Ram clamping system UPC/H8000/Dynafix: 150 kg Min. distance electrode clamping system to worktable: 135 mm Max. distance electrode clamping system to worktable: 585 mm INTEGRATED C-AXIS Rotational speed adjustable: 1 - 20 rpm Measuring resolution: 0.001 degrees Load capacity for manual electrode change: 50 kg Load capacity for automatic electrode change: 15 kg Holding/clamping torque: 120 Nm Max. inertia moment of electrode: 0.4 kgm² WORKTABLE Support surface (W x D): 760 x 1000 mm Prsdpfxjw T Thme An Ioa Load capacity: 2,000 kg TRAVEL PATHS X / Y / Z (within working tank): 550 x 850 x 450 mm Y (for electrode change and loading position): 1180 mm CONTROL PC-NC dialog: 2 x 32 bit Drive type: digital AC servo motors Max. traverse speed X, Y, Z: 5000 mm/min High speed jump max.: 18,000 mm/min MACHINE DETAILS Main voltage: 400 V / 50 Hz Control voltage: 24 VDC Maximum fuse: 32 A Power consumption: 19 kVA Machine weight: 6,400 kg Main dimensions (W x H x D) with generator: 2760 x 2730 x 2940 mm Required floor space with generator: 9 m² Generator weight: 640 kg Operating hours: 3,221 h

Kondisi: baik (bekas), Tahun pembuatan: 2008, de-ts3a Podexl D Adopfx An Iora

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 800457, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 3.400 mm, jarak gerak sumbu Z: 1.000 mm, jarak antara penyangga: 2.000 mm, model controller: Siemens 840D SL, Mesin telah direkondisi secara menyeluruh pada tahun 2012. DETAIL TEKNIS Perjalanan X: 4.000 mm Perjalanan Y: 3.400 mm Perjalanan Z: 1.000 mm Jarak antara tegak: 2.000 mm Daya spindle: 37 kW Kecepatan putar: 12–2.800 rpm Jarak spindle milling ke permukaan penjepit: 280–1.280 mm Tipe dudukan: ISO SK-50 Ukuran meja – longitudinal: 3.000 mm Ukuran meja – melintang: 1.500 mm Kapasitas beban meja: 2 x 10 t Prsdpfxjx Uwnbe An Ija Rentang putar sumbu C: 0–360° (setiap 1°) Rentang ayun: 90°–0°–90° (setiap 1°) DETAIL MESIN Kontrol: Siemens 840D SL Sumbu: 5 dikendalikan Kebutuhan daya total: 70 kVA Dimensi & Berat Ruang yang dibutuhkan: sekitar 10.200 mm x 7.200 mm x 5.925 mm Berat mesin: sekitar 82 t PERLENGKAPAN Sistem pergantian alat otomatis untuk 60 alat 1 unit milling universal 1.750 Nm Catatan: Mesin sudah dalam keadaan dibongkar.

Kondisi: baik (bekas), Tahun pembuatan: 2013, panjang total: 3.990 mm, tinggi total: 2.500 mm, lebar total: 2.280 mm, berat keseluruhan: 8.500 kg, de Podpertrx Rjfx An Iera

Kondisi: baru, Tahun pembuatan: 2025, panjang meja: 900 mm, lebar meja: 450 mm, jumlah spindel: 1, kecepatan spindel (min.): 8.000 rpm, beban meja: 500 kg, de Pjdpfxexc I Dgo An Ijra

Kondisi: baik (bekas), VT 5041-21/3-OD Predpfxozw D Idj An Ija

Kondisi: baik (bekas), BOSCH B 830 303 227 Podpezw D Hysfx An Iera

Kondisi: baru, The manual milling machine Omec 650-M is designed for producing dovetails on drawers and various furniture components. The machine is equipped with a spindle unit featuring a cutter, which allows the creation of dovetails with different heights. The machine can cut four types of dovetails with different pitches. Clamping and unclamping of the workpieces is performed manually using eccentric shafts. Operation (on/off) is managed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. The machine is manufactured in accordance with CE standards. Prjdodcdwbopfx An Iea Technical data: - Connected load: 0.75 kW, 400 V, 50 Hz - Number of spindles: 1 - Spindle speed: 16,500 rpm - Standard dovetail pitch: 25 / 40 / 50 / 60 mm - Machine weight: 100 kg - Footprint (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: - Workpiece length: 200 – 1500 mm - Workpiece width: 60 – 280 mm - Dovetail height: 5 – 18 mm - Workpiece thickness: 7 – 45 mm The machine is supplied with the following standard components: - Eccentric HSS cutter mounted on the machine - Set of tools for adjustment and maintenance - Operating manual.