Beli Permanent-Rundmagnet Mit Sternpolteilung bekas (10.970)

Kondisi: sangat baik (bekas), Viessmann Vitoplex/105kw boiler suhu rendah dengan pembakar minyak Hnedpfx Aowauaxjazor

Kondisi: baik (bekas), • Type: GS - 250 Hnsdsrgqp Nopfx Aazsr • Serial no.: 14 • Year of manufacture: 1999 • Min. dimensions: L1100mm x W800mm x H900mm • Max. dimensions: L1700mm x W1300mm x H900mm • Power supply: 1 x 220V / 50Hz / 7.8 A • Connected load: 1500W / 2800 rpm – 1 kW • Price on request

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) Hedeh R Taqopfx Aazsnr - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with base, usable depth 1,200 mm - 27 cantilever arms, usable depth 1,200 mm, with end stops - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roof structure (*Without timber purlins and trapezoidal sheets for roof construction) Hjdpfxjmhhy Ne Aazonr - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available to order and system can be expanded at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof beams (maximum snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, depth 1,200 mm, with end stops = 4 storage levels - Including longitudinal and diagonal bracing with 1,500 mm upright pitch - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and C4 load signs as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site pick-up possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior delivery notification. The material is packed for easy unloading. The base must be concrete, level, suitable for anchor fixing, and able to withstand applied loads. The customer is responsible for verifying and ensuring the ground conditions, load-bearing capacity, and any necessary permits from authorities. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, rack uprights should have at least 500 mm of upright projection above the top storage level.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 85-70, Magnet Overband Self-cleaning dengan Rangka Hjdpfx Aasx Tid Eozenr Cocok untuk lebar konveyor 1200 mm. Panjang kerja 1470 mm x lebar kerja 645 mm.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Technical details: SEW Motor Type: DV132H8/4BH/HF/TH r/min: 700/1450 IP:54 Hz: 50 400V AC Brake: 400V Weight: 83.94 kg The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor is characterized by its robust construction and reliable operation, ensuring stable and efficient performance. The integrated rotary table enables flexible and precise control of motion sequences, making it particularly suitable for manufacturing and assembly applications. Hsdpfxowu Dbbj Aazsnr

Kondisi: bekas, 7 collet sizes: 7-9-10-12-16-18-20 mm Hjdpsbn Rpiofx Aazjnr

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25MythoSarya05, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" Hnsdpfx Aaeykuh Nozjr FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: N2104796, GEM F470 AUTOMATIC CARTON SEALER WITH AUTOMATIC FLAP CLOSING FOR UNIFORM CARTON SIZES incl. centering unit and Siemens S7 PLC control Hsdpfx Ajykugxsazjnr CARTON DIMENSIONS: - Length: min. 150 mm – max. 600 mm - Width: min. 100 mm – max. 520 mm - Height: min. 100 mm – max. 670 mm TECHNICAL DATA: - Siemens S7-1200 PLC control - Centering unit RCC500 infeed - Vertical drive and guide belts - Carton size adjustment manual - Sealing units for bottom and top - Standard version T22 / T23 - Tape width from 50 to 50 mm, depending on the unit used - Adjustable tension - Max. tape roll diameter 360 mm - Tape roll core diameter 76 mm - Power supply 400 V, 3-phase, N, PE – 50/60 Hz - Power consumption 0.25 kW - Protection rating IP54 - Operating temperature +5°C to max. +35°C - Conveyor speed 22 m/min - Average output 1200 cartons/hour - Working height 650 mm - Weight 293 kg - Machine dimensions (L x W x H) mm: 2,470 x 990 x 1,782 H - CE-compliant safety guard: Side sheet metal covers with access door, supplemented with infeed doors (L 850 mm), upper and lower covers. Image may show optional equipment subject to surcharge.

Tahun pembuatan: 2021, jam operasional: 10 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S21MythoEasyLow04, Demo machine - like new. MYTHO EASY Low Very low-profile system in height Wrapping height: 2400 mm Turntable diameter: 1650 mm Hjdpfx Aajx Ta Nxezonr LP flat turntable: 30 mm flat, 500 mm long Max. load weight: 1200 kg PowerStretch 200%, adjustable via gears to 150-200-250% Automatic, adjustable double-rope formation - see pictures. Automatic cutting Optional: film clamp on the turntable German Schuko plug 6 individually programmable programs Additional demo units immediately available from stock. Prices ex stock Ludwigsburg

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS06, Demonstration Unit ATLANTA NEOS Stretch Wrapper ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film power stretch: 120–400% Motorized pre-stretch system with stepless adjustment Adjustable pre-stretch ratio from 120 to 400% via control panel Film application tension electronically controlled via control unit Quick-load system (IEF) for easy film roll change Film specifications: max. outer diameter Ø300 mm – height 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah each, connected in series Minimum 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Max wrapping height (machine with mast, incl. pallet): 2,150 mm Height detection via photoelectric sensor or manual input on display Protective rail for emergency stop of drive unit Emergency stop switch according to CE regulations Acoustic warning signal and warning light at machine start Fall protection for film carriage Start & Stop push buttons Machine operation complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: Hjdpfeyktv Ssx Aazonr All functional parameters adjustable via display - Display lock for program modification - Adjustable machine speed around the pallet up to 80 m/min - Carriage ascent and descent speed individually adjustable - Ascent speed: 1.3 – 5.4 m/min - Descent speed: 1.3 – 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Adjustable wrapping height - Film application tension for base/top wrap, ascent/descent independently adjustable - Film pre-stretch for base/top wrap, ascent/descent independently adjustable - Ergonomic height for film roll change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrapping (upward/downward) - Simple wrapping (only up or only down) - Wrapping cycle with defined start and stop heights - Wrapping to a stored height (disabling height sensor) - Wrapping cycle for large pallets - Wrapping cycle for top sheet application - Soft-start cycle for installing edge protection - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or powered rope formation (optional) Other machines available immediately from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm 99 programs TOUCH display 7" Hnjdpfx Ajykud Roazsr FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150mm - 200mm, suitable for loading with electric pallet truck and forklift – height adjustable Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet) 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, independently adjustable upwards/downwards Acoustic signal at wrap start and at cycle end Emergency stop switch according to CE regulations Turntable always stops in start position Drop protection for film carriage Pushbutton (Ø 22 mm) for machine power-on as well as start & stop functions according to CE standards ADJUSTABLE PARAMETERS VIA CONTROL PANEL Hnjdpfx Aaoykuhcjzjr All functional parameters adjustable via display F02 – Continuously variable turntable speed 5–12 rpm Carriage speed upwards and downwards independently adjustable F03 – Carriage speed upwards: 1.3 to 5.4 m/min F04 – Carriage speed downwards: 1.3 to 5.4 m/min F05 – Number of revolutions at pallet base (1–10 wraps) F06 – Number of revolutions at pallet top (1–10 wraps) F09 – Pallet wrapping height setting F62 – Ergonomic height for film change ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrapping (upwards/downwards) F01 – 2 – Single wrapping (only upwards or only downwards) F01 – 3 – Manual wrapping F12 – Wrapping to a preset height (photoelectric sensor deactivated) F29 – Soft start cycle for application of edge protection Soft start to reduce film tearing on sharp pallet edges FILM CARRIAGE TYPE "FM" WITH MECHANICAL BRAKE via manually adjustable brake roller on the film carriage Film specification: max. outer diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard supply connection: 230 V – 1L+N+PE – 50 Hz Total connected load: 1.2 kW / 6A Further units available from stock immediately.

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm Hnodpfxeyktrtj Aazor 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in several steps via programs Turntable height: 75 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage lifting speed up/down Acoustic signal at wrapping start and at end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in home position Fall protection for film carriage Push button for machine power-on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE OPERATING PANEL All functional parameters adjustable via display F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage travel speed up and down adjustable independently Hnedpfx Aoykub Aeazer F03 – Carriage ascent speed from 1.3 to 5.4 m/min F04 – Carriage descent speed from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Photo cell wrapping height delay F13 - F16 – Film tension for bottom & top wrapping / ascending & descending can be set independently F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT THE OPERATING PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (up/down) F01-2 – Simple wrapping (up or down only) F01-3 – Push button for manual functions F10-F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated for height) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for corner protection application F30-F31 – Reinforced wrapping cycle with adjustable number of wraps Soft start to reduce film breakage on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Options available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photo sensor for black products Cutting device etc. Further machines available ex stock Ludwigsburg. Some images may show optional equipment subject to surcharge. Illustration similar

Tahun pembuatan: 1992, Kondisi: belum diuji (bekas), Carrier bag machine and double net clipper, manufacturer: Strapack, suitable for apples and potatoes, 1-5 kg possible. The machine is in very good condition and was in operation for only about 10 years. The machine features 4 carriages, making it capable of producing approximately 15 - 20 bags of 2 kg per minute. The machine is ready for operation and comes with all accessories. It has been fully overhauled. Price on request. I also sell SPARE PARTS for EW20, EW10, and NET CLIPPER UC20. For enquiries, please contact Hsdpfxjhh Idro Aazjnr

Kondisi: baik (bekas), 1x Arburg 320C 500-170 dengan Multilift, pagar pengaman, dan konveyor penyimpanan. Dijual tanpa konveyor Z, alat tempering, dan hisap Koch. Mesin dapat tersedia dalam waktu singkat sesuai kesepakatan. Hnedjyym Sajpfx Aazor

Kondisi: baru, Tahun pembuatan: 2025, Delivery every Monday, Tuesday – RELIABLE! 3-fold segmented bending machine with foot operation EU production Folding bench with foot operation Segmented upper beam, lower beam, and bending beam - Precision-ground bending segments - Segments with triple guidance for easy and quick adjustment Hsdpoc I T Txefx Aazsnr - Folding bench with complete foot control - Piano key segments in the upper, lower, and bending beams provide a wide range of bending possibilities - Upper, lower, and bending beams segmented (piano key design) - Segments are adjustable and removable - Precision-ground bending segments made from extremely tough and hard special alloy steel - Bending beam is effortless to operate thanks to a heavy-duty pressure spring/shock absorber - Heavy and robust construction for decades of operation - Convenient opening and closing of the upper beam Technical Data: - Max. working width: 1400 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 295 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - All three beams equipped with segment jaws (full segmentation) - End stop for pre-set bending angles - Degree scale - Free clearance: 100 mm Transport rollers included. Nationwide shipping within Germany: 180 euros SCRIBING TEMPLATE FREE OF CHARGE! We issue invoices with 0% VAT (intra-community supply) as well as with 19% VAT. We look forward to your inquiry!

Kondisi: baru, Tahun pembuatan: 2025, PROD-MASZ sheet metal bending machines, folding benches, and guillotine shears leverage the precision of CNC technology. This range is designed for industrial applications, ensuring every product stands out with outstanding durability and ruggedness, regardless of working conditions. The specifications comply with strict technical standards and stringent CE regulations, with adherence to EU requirements providing the best proof of the equipment’s quality. Additionally, the entire range is covered by a 12-month warranty. Versatile, high-performance, heavy-duty, and exceptionally robust segmented folding bench – this is no standard folding machine, but one that’s significantly stronger and more durable. A segmented folding bench is distinguished by full segmentation along the entire 1.40 m working length. The upper and lower segments can be removed quickly and easily, and the bending beam is divided into individual segments. Bending angle adjustable from 0 to 155 degrees. Clamping is foot-operated, keeping both hands free for optimal sheet metal positioning; opening and closing also by foot control. The bending beam is fitted with two gas pressure dampers for exceptionally smooth and easy operation. At the rear of the machine there is a practical segmented tool box. Technical data: - Max. working width: 1,400 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 300 kg - Segment jaw widths: 30, 40, 50, 60, 70, and 100 mm - Three beams equipped with segment jaws (fully segmented) - Adjustable stop for preset bending angles - Degree scale Hedpfx Aaoc Swhyezjnr Price: €5,700 Swivel castors included Delivery time: weekly Cash payment on delivery Delivery cost: €180 We look forward to your inquiry!

Kondisi: sangat baik (bekas), Interroll roller conveyor 0.99m with drive The Interroll conveyor section is in very good condition. Additionally, the conveyor features its own drive motor. Width: 400mm Length: 990mm Hedpfxohvmi To Aazenr Complete factory closure, wide range of mezzanine floors, pallet racking, shelving systems, vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! International shipping costs upon request!

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 3.000 h, Fungsionalitas: belum diuji, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, For sale as a complete package: Waterjet cutting machine STM 3015, year 2013, with computer from 2018, including 3 network licenses for IGEMS software. Working area 3000x1500mm. High-pressure pump Ecotron 40.37, year 2013 Water softening system, year 2018 --> as new condition Abrasive backflushing system, year 2013 Column-mounted slewing crane Abus 2t, year 2018 --> as new condition Vacuum lifting system Devo-Tech, load capacity 1800kg --> as new condition Various accessories. Several sandbags The system was acquired at the end of 2018 and commissioned at the beginning of 2019. At that time, the waterjet system and pump had been completely overhauled by the supplier. Unfortunately, the cutting system was rarely used in our company. It was run only a few hours per year. Not in operation since around July 2025. The high-pressure pump is defective; it is not leak-proof and is losing water. Both high-pressure cylinders were replaced in recent years. The last service was in 2025. According to the service engineer, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and the vacuum system can also be purchased separately. Please send an offer with your price expectation. New price in 2019 for crane and vacuum equipment was approx. CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected but has been drained and cleaned. Please send registrations or offers by email, not by phone. Hsdpfxsyq Rdyj Aazjnr

Kondisi: baik (bekas), 0001 Hnodpfxozav Hrj Aazsr

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, lebar total: 1.550 mm, tinggi total: 2.050 mm, panjang total: 900 mm, berat keseluruhan: 120 kg, tinggi bukaan pintu: 400 mm, panjang area pemindaian: 150 mm, lebar area pemindaian: 150 mm, jarak gerak sumbu Z: 300 mm, lebar yang dibutuhkan: 1.550 mm, kebutuhan tinggi: 2.050 mm, panjang gelombang laser: 1.064 nm, suhu lingkungan (min.): 15 °C, suhu lingkungan (maks.): 35 °C, frekuensi input: 50 Hz, jenis laser: laser serat, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. In many industries, the use of a laser is indispensable for permanent marking. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software according to preset parameters. In addition, the software is capable of reading data (variable information, such as drawing numbers, project names, etc.) from existing tables and automatically transferring them to predefined fields. Use of a handheld scanner is also possible. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. Further options, such as lateral extensions for marking long workpieces, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150 mm (larger options available) • Signal light to indicate operational status • Optional: Rotary axis (3-jaw chuck) • Optional: Fume extraction (incl. activated carbon filter) • Optional: Digital height measurement system • Optional: Autofocus system – automatic focus distance determination • Optional: Extensions for large workpieces (single- or double-sided) • Marking software EZCAD in German / English • Pilot laser (easy preview, plaintext preview) • Focus finder (simple focus adjustment) • Maximum workpiece height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile Hnodpsxd Az Nefx Aazer • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Power supply 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, The universally applicable laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent markings, the use of a laser has now become indispensable across numerous industries. The powerful laser software allows you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—and without extensive programming knowledge. Serial and article numbers are automatically incremented after initial setup. In addition, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a hand scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side arms for the marking of long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W, or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction system (including activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) Hjdpfx Aoxd A I Aoazsnr • Signal lamp for status indication • Max. part height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard shelf • Aluminum profile frame • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: LAS 23, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with customised attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base frame, it can be wheeled directly to the workpieces to be marked, making it suitable for both large and heavy as well as small workpieces. The integrated fume extraction system is built into the device. The powerful laser software enables texts, numbers, 2D codes, QR codes, and logos to be created with just a few clicks and without extensive programming knowledge. The software can increment serial and article numbers automatically after presetting. In addition, variable information such as drawing numbers or project names can be automatically retrieved from existing tables and transferred into predefined fields. The use of a handheld scanner is also possible. Made in Germany • 30W fiber laser (optional: 20W, 50W) • Laser class 1 • Wavelength: 1064nm • Marking field size: 70x70mm (optionally larger) • Marking software EZCAD (available in German/English) • Pilot laser (simple preview, plain text preview) Hnedpfx Aaeu Smd Sszjr • Laptop with mount and Windows OS included • Constructed from aluminium profiles • 230V connection including cable reel • Air-cooled • Dimensions: approx. 350 x 605 x 1080mm (L x W x H) • Weight: approx. 40 kg • Weight of portable laser unit: approx. 2.8 kg • Integrated extraction system