Beli Potisje Mesin Bubut Spindle Berlubang bekas (78.356)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 50 mm, diameter pembubutan: 40 mm, kecepatan spindel (maks.): 8.000 rpm, model controller: Fanuc 0i-TD, RINCIAN TEKNIS Diameter putaran: 40 mm Panjang putaran: 50 mm Jarak pergerakan sumbu X: 180 mm Jarak pergerakan sumbu Z: 200 mm Kecepatan cepat sumbu X/Z: 15 m/menit Kecepatan spindel: 8.000 RPM RINCIAN MESIN Pengendali: Fanuc 0i-TD Hfedpszul Srsfx Aazok Dimensi & Berat Ruang yang dibutuhkan: sekitar 1.500 × 700 × 1.600 mm Berat mesin: sekitar 1.500 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 50 mm, diameter pembubutan: 45 mm, jarak pergerakan sumbu X: 180 mm, jarak lintasan sumbu Y: 200 mm, model controller: Mitsubishi FCA70LPC-V, RINCIAN TEKNIS Diameter putaran: 45 mm Hfsdpszul R Usfx Aazsk Panjang putaran: 50 mm Jarak pergerakan sumbu X: 180 mm Jarak pergerakan sumbu Z: 200 mm Kecepatan cepat sumbu X/Z: 20 / 30 m/menit Kecepatan putar spindel: 8.000 RPM RINCIAN MESIN Pengontrol: Mitsubishi FCA70LPC-V Dimensi & Berat Berat mesin: sekitar 1.600 kg Ukuran yang dibutuhkan: sekitar 1.700 × 700 × 1.700 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 145 mm, diameter pembubutan: 168 mm, jarak pergerakan sumbu X: 130 mm, jarak lintasan sumbu Y: 110 mm, model controller: FANUC 31i-TA, RINCIAN TEKNIS Diameter putaran: 168 mm Panjang putaran: 145 mm Jarak gerakan sumbu X: 130 mm Jarak gerakan sumbu Z: 110 mm Kecepatan spindel: 45–6.000 RPM RINCIAN MESIN Pengontrol: FANUC 31i-TA PERALATAN 2 × Sistem penyangga portal 2 × Jalur benda kerja untuk komponen yang diuji 2 × Chuck 3 rahang SMW Autoblok, tipe BHM 165, 152,4 mm (6 inci) Silinder hidrolik SMW Autoblok, tipe SIN-S 100, sisi kiri Silinder hidrolik SMW Autoblok, tipe VNK 70/37, sisi kanan Konveyor serpihan, mengarah ke belakang dari mesin Kontrol pemasangan benda kerja yang dikendalikan udara, sisi kanan Pemantauan penjepitan benda kerja, di kedua sisi Orientasi spindel 4 posisi, di kedua sisi Injeksi cairan pendingin di dalam chuck melalui distributor putar Deublin, di kedua sisi Pompa cairan pendingin otomatis dengan tangki 200 liter 2 × Turret 8 posisi Lampu sinyal dengan desain seperti lampu lalu lintas Hsdpfx Ajzul Ruoazsfk Persiapan untuk penyedotan kabut oli Pematian mesin otomatis Pelumasan terpusat otomatis Antarmuka RS-232-C Transformator eksternal 10 × Pemegang bor 3 × Pemegang bubut, sisi kanan 3 × Pemegang bubut, sisi kiri Makro pelanggan B Siklus bubut

Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: G-V7-LBM2200-2S-RL-400-Schweiz, Exhibition machine Hans Schreiner slot mortiser with single-hand operation. Optimal performance due to fixed table and movable drilling head. Standard features include forward/reverse rotation, dowel boring device, and two-speed motor. Includes tool compartment, eccentric clamp, and mitre fence. Technical Data: Motor output: 3.8 kW Voltage: 400 V Table size: 570 x 300 mm Max. drilling depth: 150 mm Lateral travel: 290 mm Height adjustment: 140 mm Dowel boring device: 16, 20, 22, 25 mm hole spacing Max. drill chuck capacity: 20 mm Speeds: 1400/2800 rpm Weight: 140 kg Extraction port: 100 mm Packaging dimensions: 855 x 600 x 1160 mm Hfsdpfx Aaovw Edqezjk Prices subject to change without notice. Errors and omissions excepted.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2013, daya laser: 2.700 W, X traverse max.: 2500 mm Y traverse max.: 1250 mm Control unit: Rexroth IndraMotion MTX (base version) Laser power: 2,700 watts Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guideway for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Drives with maintenance-free three-phase motors - Repositioning unit with programmable hold-down device - Foot switch for clamp closing - Positioning pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for part ejection - Two finished parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - Laser TruFlow 2000 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control unit - Enclosed beam guide - Fine-filtered compressed air for beam guidance ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable stripper with manually adjustable stripping force - Stroke counter for punches and threads - Spray lubrication for punches - Punch slug extraction - Calculation of filling level height in the punching console - Level monitoring for thread forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - 17" touch-screen operating panel - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Auto-off mode incl. wake-up function - Program management - Production schedule Data Transmission - Network connection (RJ45) and USB interface Safety - CE marking - Dual-beam light barriers - Monitoring system for, among others, gas pressure, temperature and coolant - Emergency stop - Protection against stray radiation - Compact fume extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting bin + Roll technology functions: knurling, deburring, offsetting, beading, slitting + Spray lubrication for dies + Air blast device for small parts + 1 additional clamp + Smart Punch Monitoring (punch break detection) + Vibration-damped installation + Repositioning cylinder Hsdpsy Saqmefx Aazsfk + Warp detection + Parts conveyor (punching area) + Parts conveyor (laser area) + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, daya laser: 4.000 W, Max. working area X: 3050 mm Max. working area Y: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4000 watts Standard equipment: Machine Hfjdpfxjy Saqge Aazjk - Sturdy, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 21 tool stations and 4 clamps - Drives with maintenance-free three-phase motors - Rerun device with programmable hold-down - Foot switch for closing clamps - 2 containers for good parts - Automatic shut-off Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser control - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down with adjustable hold-down force - Stroke counter for punch - Spray lubrication for punch - Punch slug extraction - Bulge detection - Flap for punched parts 500 x 500 mm - Monitoring of fill level height in the punching console Control - Open control system based on Bosch Rexroth IndraMotion MTX - Operator panel with 15" TFT touchscreen - Program management and 80 GB storage space - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transmission - Network connection RJ45 and USB interface Safety - CE marking - Multibeam light barriers - Monitoring system for gas pressure, temperature, coolant, etc. - Quick shutdown hydraulics - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-damped installation - Thread forming function - MultiTool function - Chip conveyor with tilting bin - Active die - Ejection unit for small parts - Brush tables with loading aid - Marking function - Rerun cylinder - Bulge detection

Kondisi: bekas, NOMOR KATALOG 7650 Data teknis: - panjang kerja maksimum 1500mm - diameter kerja maksimum 250mm - pemotongan frais (frais cakram) 7,5kW - spindel – 2800 putaran/menit 3kW - kecepatan putar spindel 700/1200/1500/2000 putaran/menit - unit penggerinda 0,75kW - motor hidrolik 3kW - daya total 17,75kW - kebutuhan udara 6-8 bar - pengumpan untuk batang dengan ukuran hingga 150x150mm - diameter lubang saluran pembuangan 100mm, 160mm - dimensi untuk pengangkutan panjang/lebar/tinggi 4350x2300x1980mm - berat sekitar 3000kg Hfodpfsztrfcox Aazsk KEUNGGULAN - produksi Jerman - mesin pengganda hidrolik otomatis - dokumentasi DTR asli - belum dicat - mesin bubut bekas, kondisi sangat baik Harga netto: 59900 PLN Harga netto: 14262 EUR Harga netto dihitung berdasarkan kurs 4,2 PLN/EUR (jika terjadi fluktuasi kurs yang signifikan, harga dapat berubah)

Kondisi: bekas, Tahun pembuatan: 2001, Technical Specifications: Okuma Space Turn LB 300 MY Year of manufacture: 2001 Control: OSP U 100 L Max. turning length: 340 mm Chuck diameter: 10 inches X-axis travel: 280 mm Y-axis travel: 120 mm Z-axis travel: 500 mm C-axis: 360° (0.0001° increment) Spindle speed: 4500 rpm Bar capacity: 62 mm Weight: 6000 kg Hfjdpequcnbofx Aazok Accessories: - Driven tools - Chip conveyor - Transformer - Manuals

Kondisi: bekas, Tahun pembuatan: 1961, MTIzNDU2 Hjdpfx Aajuddnvszjfk

Kondisi: bekas, Tahun pembuatan: 1990, drehparam-001 Hjdpoygx D Hsfx Aazofk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1993, Swing diameter 1400 mm Faceplate diameter 1500 mm Hfjdpfx Aajvxa Tpozjk Control Sinumerik 850T Working height 1400 mm Tool changer 12 positions Workpiece weight 5 t Year of manufacture: 1993 Mechanical overhaul: 2010

Kondisi: bekas, Swing diameter over bed / mm Swing diameter over cross slide / mm Hsdpfx Aowgi Tmoazefk Turning length / mm

Kondisi: bekas, Tahun pembuatan: 2011, 20240613-01 Hfedpfx Aoxyaf Rsazjk

Kondisi: bekas, Tahun pembuatan: 1972, Diameter putar di atas tempat tidur: 1650 mm Diameter putar di atas support: 1350 mm Hfodpfxsy S Duve Aazok Panjang pemotongan: 10.000 mm Kecepatan putar: 1,4 - 280 rpm Diameter lingkaran di atas tempat tidur: 1580 mm Tinggi pusat di atas rel datar: 825 mm Panjang tempat tidur: 13.350 mm Lebar tempat tidur: 1.120 mm Diameter spindle di bantalan depan: 260 mm Lubang spindle: 82 mm Jarak geser support atas: 500 mm Diameter pinol tailstock: 200 mm Berat benda kerja antara pusat maksimum: 10.000 kg Berat mesin sekitar: 25,5 t Daya: 45 KW Mesin berasal dari tangan pertama, bebas dari cacat, dan berada dalam kondisi sangat baik. Pada tahun 2023, kotak spindle telah direkondisi, termasuk penggantian bearing utama spindle, pelapisan krom, serta pengerjaan ulang spindle utama dan roda dasar (tempat duduk bearing). Rel panduan tempat tidur juga dalam kondisi sangat baik sesuai usianya. Aksesori - Pelindung chuck Perlengkapan - Display digital 3 sumbu - 1 unit steady rest - 1 unit roller support - Conveyor chip (drag chain 300/100)

Tahun pembuatan: 1980, Kondisi: bekas, Swing diameter over bed: 655 mm Swing diameter over saddle: 390 mm Turning length: 1250 mm Spindle bore: 82 mm Spindle speeds: 9–1120 rpm Feeds: 0.049–3 mm/rev Total power requirement: 12 kW Hjdpfslc Uk Iox Aazefk Machine weight approx. 5.2 t Space requirement approx. 3.5 x 1.9 x 1.7 m

Kondisi: bekas, Tahun pembuatan: 1973, Swing diameter over bed 2,235 mm Swing diameter over support 2,997 mm Turning length 12,200 mm Control system: SIEMENS Faceplate diameter 2,000 mm Space requirement approx. 7 x 22 m Machine weight approx. 220 t HOESCH MFD CNC HEAVY-DUTY LATHE WITH SIEMENS CONTROL Type: D2000 SGK-1 Technical documentation included Technical Data Footprint: 7 x 22 meters + control cabinet 4.7 x 0.5 x 2 meters Faceplate 2,006 mm Center height 1,499 mm Saddle overrun 2,235 mm Bed swing diameter 2,997 mm Turning length 12,192 mm Min./max. workpiece clamping diameter in chuck Ø457/1600 mm Max. workpiece weight 110 tons Speed range 0.5 - 140 rpm (300 hp motor) Feed range 0.0118 - 7.08"/rev Permanent capacity Ø356-902 mm Copying depth 508 mm inductive Max. cutting force 30,000 Nm Double steady rest capacity Ø356-902 mm, 50 tons, roller type Machine Data 1.1 Complete machine Max. swing over cross-slide 2,000 mm Center height over bed 1,500 mm Distance between centers 12,000 mm Max. workpiece weight 100,000 kp Height measured from workshop floor to machine axis 2,200 mm Hodpfst Ei Husx Aazefk 1.2 Headstock Main spindle diameter 670 mm Faceplate diameter 2,000 mm Max. chuck diameter 1,600 mm Min. clamping diameter 455 mm Dead stop angle 80° Faceplate speed: Constant torque 1st range 0.5 – 2.6 rpm 2nd range 1.25 – 7.2 rpm 3rd range 3.1 – 18 rpm 4th range 7.8 – 45 rpm Constant capacity 1st range 9.0 rpm 2nd range 22.6 rpm 3rd range 56 rpm 4th range 140 rpm Main drive power 220 hp Max. faceplate torque 30,000 kpm Key speed 5.7 rpm 1.3 Saddle Max. allowable main cutting force 30,000 kp Longitudinal feed rate 0.3 – 120 mm/min Cross feed rate 0.3 – 120 mm/min Rapid traverse rate longitudinal 2,000 mm/min Rapid traverse rate cross 1,000 mm/min Max. copying depth 500 mm Max. toolpost length, measured from the front edge of the cross-slide to the front edge of the toolpost: 700 mm Toolpost – width 60 mm / 35 mm Cutting height of tool units 60 mm Cutting height of shank tools mounted on the clamping table 100 mm Stroke of the upper toolpost 820 mm 1.4 Tailstock Tailstock cylinder diameter 580 mm Cylinder adjustment 150 mm Dead stop angle 80° Rapid traverse speed 2,000 mm/min Positioning speed 500 mm/min 1.5 Steady Rest Clamping range 350 – 900 mm Load 50,000 kp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Turning length / mm Swing diameter over bed / mm Swing diameter over cross slide / mm Control system / Universal Lathe VDF Boehringer DUS 1000 ti OPTIONAL EQUIPMENT (AT EXTRA COST): C-AXIS MILLING TOOL Machine no. 2042.6616-05 Year of manufacture: 2004 Turning length approx. 2,200 mm Swing diameter over bed: 1,000 mm Swing diameter over bed: 1,000 mm Centre height over flat guideways: 500 mm Bed width: 560 mm Carriage guide length: 800 mm Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Infinitely variable three-phase motor (AC motor) Drive power: 37 kW Maximum torque: 4,069 Nm Total speed range: 6.4 - 1,600 rpm Gear stages: 2 Heidenhain Manualplus 4110 control, completely renewed approx. 1 to 2 years ago 2 steadies Equipped with Rotokraft power chuck, diameter approx. 500 mm Hfodpoud In Hefx Aazek Includes extensive accessories such as approx. 15 sets of clamping jaws, and approx. 15 sets of Multifix toolholders, size D. Machine is equipped with a separate milling unit with its own control system, value approx. €20,000.00. OPTIONAL EQUIPMENT (AT EXTRA COST): C-AXIS MILLING TOOL Operated exclusively by owner, in excellent condition!

Kondisi: bekas, Tahun pembuatan: 1953, Turning length / mm Turning diameter over bed / mm Faceplate diameter / mm Faceplate diameter: approx. 3600 mm Center height over bed: approx. 1500 mm Turning diameter over bed: 2600 mm Swing diameter in pit: 3600 mm Turning diameter over carriage: 1300 mm Turning length: approx. 2400 mm Max. workpiece weight: 22,000 kg Max. torque at faceplate: 5,000 mkg Faceplate ring gear pitch diameter: 1900 mm Main spindle bore: 120 mm Hfsdpsua Iw Tefx Aazjk Speed range standard: 0.71–35.5 rpm increased: 1–50 rpm increased: 1.4–71 rpm Total power: 38 kW Total weight: approx. 42.5 tonnes

Kondisi: bekas, Tahun pembuatan: 2006, 657fda1e6c6419ec2d6ad3e8 Hfsdsxgu R Iepfx Aazjk

Kondisi: bekas, Tahun pembuatan: 1993, Sinumerik 805 CNC control Spindle speed: 45 - 6,000 rpm Through-bore diameter: / 0 Machine weight: approx. 20 t Machine type: Deep hole drilling machine Model/Type: TB 2 15 30001KT Year of manufacture: 1993 Hfedjvvx Hijpfx Aazek Manufacturer: Loch Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3,800 mm Length = approx. 13,500 mm Height = approx. 3,100 mm Drilling length: approx. 3,500 mm Drilling capacity: 45 mm drilling / 80 mm counterboring Spindle speed range: 45 – 6,000 rpm Control: Siemens Sinumerik 805 Hamül – Coordinate Table Type: KT 8.5 – 10.10 Clamping area: approx. 1,100 mm x 980 mm Travel distance Y-axis: approx. 800 mm Travel distance X-axis: approx. 500 mm 7 clamping T-slots: 18 mm Special equipment: 1 pc. Fibroplan NC rotary indexing table Type: NC 1.05 Permissible load in horizontal operation: 2,500 kg With hand chuck Forkardt F 630 The NC rotary indexing table can be manually adjusted longitudinally and transversely relative to the clamping table and is hydraulically clamped. 1 pc. chip centrifuge Type: VZ5A by CEPA Drum capacity: 80 litres Max. load per batch: 100 kg Drum diameter: 600 mm Speed: 1,000 rpm 1 pc. auxiliary pump for large drill diameters 1 pc. Bosch radial piston pump No. Suitable for insert drills (internal cooling, chips discharged outward) Suitable for BTA drills with screwed-on heads (internal cooling, chips discharged inward)

Kondisi: bekas, Tahun pembuatan: 1988, translation-01 Hsdpexn Tz Ijfx Aazofk

Kondisi: bekas, Tahun pembuatan: 2006, Complete bore diameter / mm Bore depth / mm Number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces For sale is a specialized machine package – two perfectly coordinated systems for the complete machining of long, heavy workpieces with the highest standards of precision and efficiency. MACHINE 1 Froriep CNC Deep Hole Drilling Machine – The Prefabrication Specialist Year of manufacture: 2006 Control: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Chuck clamping diameter: 900 mm Weight: approx. 47,000 kg Ideal for precise pilot drilling of deep holes – including faceplate and steady rest MACHINE 2 Irle Machine – High-Precision Finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed rate: 3 – 4,500 mm/min (stepped) Centre distance: 11,000 mm Hfodpfx Aajuddimezsk Swing diameter over bed: 1,250 mm Steady rest clamping range: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tons Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for precision boring, honing, and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pilot drilling to final machining - Large workpieces up to 11 meters and 10 tons - High process reliability through perfect machine synchronization - Immediately available, well-maintained, and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics, and large component manufacturing

Kondisi: bekas, Tahun pembuatan: 2000, Chuck diameter 3,200 mm Swing diameter 3,500 mm Turning height 2,200 mm Dimensions (L x W x H) 7,730 x 6,240 x 6,700 mm Control type 840 D sl Voltage 3 x 400 V Frequency 50 Hz Speed 0.8 - 40 rpm Max. turning diameter 3,500 mm Total power requirement 51 kW Machine weight approx. 86 t Technical specifications Machine type: CNC vertical turning lathe Manufacturer: Rafamet Year of construction: 1973 (conventional) Completely overhauled and retrofitted with new control system 2010 Control system upgrade 2016 Control: Siemens 840 D Sl Condition: Very good Chuck Turning diameter of chuck: 3,200 mm Number of speed ranges for chuck: 3 (infinitely variable) Speed ranges for chuck: 0.8 - 40 rpm Level I: 0.8 – 3 rpm Level II: 0.8 – 11 rpm Level III: 0.8 – 40 rpm Workpiece machining Max. turning diameter: 3,500 mm Max. turning height above chuck: 2,200 mm Vertical saddles Minimum axis distance between vertical saddles: 470 mm Max. ram travel of left vertical saddle: 985 mm Max. ram travel of right vertical saddle: 985 mm Axis feeds – infinitely variable max.: X1,2 3 m/min max.: Z1,2 2.5 m/min Rams not swiveling Crossrail Rapid traverse of crossrail: 600 mm/min Max. distance between crossrail and chuck: 2,300 mm Hjdsuddcgspfx Aazefk Load capacities +Permissible torque for turning workpieces with a diameter of 2,000 mm at 20 m/min: 8,000 kg +Maximum chip section for steel workpieces Fz = 50 kg/mm² at 20 m/min, for all saddles: 45 mm² +Maximum chip section for steel workpieces Fz = 50 kg/mm² at 20 m/min, for one vertical saddle at max. ram extension 985 mm: 2.5 mm² +Maximum chip section for cast iron workpieces HB = 160 kg/mm² at 20 m/min, for all saddles: 120 mm² +Maximum chip section for cast iron workpieces HB = 160 kg/mm² at 20 m/min, for one vertical saddle at max. ram extension 985 mm: 22.5 mm² +Maximum permissible workpiece weight at 0.8 - 3.15 rpm: 17,500 kg +Maximum permissible workpiece weight at 4 - 40 rpm: 7,500 kg Electric motors Power and speed of main drive motor: 51 kW Feed motor power: - Vertical saddle beams (2 units): 16 Nm (gearbox 1:10) - Rams (2 units): 16 Nm (gearbox 1:12) Power and speed of hydraulic pump drive motors (2 units): 3 kW - 1,500 rpm Power and speed of clamping hydraulic motor for vertical saddle beam: 1.5 kW - 1,500 rpm Power and speed for crossrail drive: 15 kW – 1,500 rpm Compressed air supply and other resources Compressed air connection: 6 bar, oil- and water-free Energy consumption, requirements Voltage: 3 x 400 V Control voltage: 24 V Frequency: 50 Hz Protection: 315 A Main dimensions and weight of the machine Length: 7,730 mm Width: 6,240 mm Height: 6,700 mm Weight: 85,750 kg Tooling: Capto C6 holder Non-driven Faceplate Faceplate turning diameter: 3,200 mm Clamping plate diameter: 3,400 mm Number of faceplate speed ranges: 3 (infinitely variable)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Turning length / mm Swing diameter over bed / mm Swing diameter over cross slide / mm Control system / WOHLENBERG PT1-1070II Heavy-Duty Lathe Very well-maintained heavy-duty lathe, make: Wohlenberg. The machine was partially overhauled in 2013! Model PT1-1070II Year of manufacture: 1989 Partially overhauled in 2013 Country of origin: Germany CNC control Siemens 840 D Extended from 7 m to 11 m turning length Santer turret geometry Swing diameter over bed: 1,070 mm Swing diameter over cross slide: 710 mm Turning length: 11,000 mm Bed width: 710 mm 2 gearbox speed ranges Spindle speed: 3.55 - 710 rpm Tailstock quill diameter: 200 mm Tailstock quill stroke: 350 mm Spindle bore: 128 mm Chip conveyor Boring turret incl. boring bar approx. Ø 200 x 2,430 mm Hfedpeud Ipksfx Aazok Faceplate: 1,000 mm Steady rest with 4 jaws, 500 mm open Main drive motor: 71 kW Including documentation

Kondisi: bekas, Swing diameter over bed: 2400 mm Swing diameter over support: 2200 mm Turning length: 10,000 mm Drive power: 185 kW Face plate diameter: 1650 mm Spindle speed: 1.5 - 150 rpm Max. workpiece weight: 70,000 kg Clamping diameter: 1400 mm Technical Data Working Area Maximum swing diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in headstock faceplate: 300 - 1600 mm With special jaws up to 2050 mm Clamping diameter in tailstock faceplate: 300 - 1400 mm Maximum workpiece weight: 70,000 kg Hjdpfoxddvnsx Aazofk Main Drive, Faceplate Faceplate diameter: 2000 mm Faceplate speed, infinitely variable in 4 ranges: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Main motor drive power: 185 kW Flange center angle: 70° Supports Travel of grooving slide: 500 mm Travel of cross slide: 1400 mm Rapid traverse, longitudinal: 2000 mm/min Rapid traverse, cross: 800 mm/min Infinitely variable feeds, longitudinal: 0.6 - 300 mm/min Infinitely variable feeds, cross: 0.3 - 120 mm/min Maximum cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Clamping diameter of faceplate: 1400 mm Flange center angle: 70° Rapid traverse: 1250 mm/min Special Equipment Copying device for first support: Copying length: 8500 mm Max. copying depth in a single pass: 500 mm Boring attachment: Boring bar: 460 x 390 mm Boring diameter: 600 - 1000 mm Maximum boring depth in one pass: 2700 mm For K_s of 200 kp/mm² - s_max = 1.5 mm/rev a = max. chip cross-section 30 mm² at an overhang of 1000 mm With increasing boring depth, reduced chip cross-section A guide rail for taper turning, adjustment angle up to 8° and a maximum taper length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide rail for taper turning, adjustment angle up to 15° and a maximum taper length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle housing.