Beli Rw Recycling World Gmbh Sievemachine bekas (70.863)

Kondisi: baru, Brand new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, incl. operating manual and CE declaration of conformity. Type: EBB1150RWP Alternatively available with other types of agitators and in other sizes. Volume: 1150L Approx. dimensions: Internal Ø 1190mm x cylindrical height 1000mm External: Ø 1390mm Total height: approx. 1300mm plus agitator motor Material: 1.4301 / AISI304 stainless steel Surface finish: IIIc/IIId / satin polished Interior weld seams ground Max. operating temperature: 110°C Max. operating pressure: ATM - Vertical design on four tubular legs with forklift entry tunnels - Upper lid: Central traverse with two hinged lid halves - Bottom: Flat bottom, sloped, with side outlet DN50 DIN11851 and disc valve, EPDM seal - Insulation: 50mm mineral wool around cylinder, hermetically welded insulation jacket, stainless steel 1.4301 Equipment: 1x Upper lid as central traverse with two hinged lid halves, clamping function for lid, Stainless steel sheet grating below the lid, bolted, removable 1x Agitator flange on the upper lid 1x Inlet nozzle DN50 DIN11851 on the upper lid 1x Outlet assembly disc valve DN50 DIN11851, EPDM seal 1x Nameplate Propeller agitator for low-viscosity media Power: 0.75KW Speed: 1410rpm Operating voltage: 3PH 400V Bsdpsw Dy D Defx Aiyjlh

Kondisi: baru, Factory-new agitated mixing tank with dissolver Type: STOC2200RWD Volume: Approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Configuration: Single-wall Product contact material: 1.4301 stainless steel (AISI 304) Surface: Satin-finished exterior, interior BA (IIId) Internal welds: Pickled, passivated, and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN 11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Discharge outlet clearance to ground: 350 mm Equipment: Bsdew Dy Hlepfx Aiyelh - 1x Ø 500 mm manway with swivel bracket on the top, EPDM gasket - 1x agitator flange connection IEC200 - 3x calotte / height-adjustable feet - 1x venting valve DN50 stainless steel, non-pressurised, on the top - 1x DN50 DIN 11851 outlet nozzle, centrally in the bottom - 1x DN50 DIN 11851 nozzle on the top with blanking cap - 1x DN65 DIN 11851 nozzle on the top with blanking cap - 2x crane lifting lugs on the top - 1x ladder bracket on the cylinder - 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 rpm Operating voltage: 3PH 400V - Robust agitator shaft mounted to the agitator motor with a coupling sleeve - Agitator shaft dynamically balanced for concentricity within speed range - 1 piece dissolver disc Ø 275 mm fastened at the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor elastically mounted on neoprene rubber-metal buffers

Kondisi: baru, Factory-new stainless steel transport container with anchor agitator Bodpfxow Dy Ngo Aiyelh Type: SLA1150RWA Volume: approx. 1150L Design: Vertical design with forklift slots Construction: Single-walled, min. 1.5mm wall thickness Contact material: 1.4301 stainless steel Surface: Satin finish outside, IIId inside Internal welds: Pickled, passivated, and brushed Operating pressure: Atmospheric Top: Central crossbeam with two-folding lid halves Bottom: Dished bottom with drainage groove Container dimensions: Container diameter: 1190 mm Cylinder height: 1000 mm Total height: 1300 mm (plus agitator motor) Features: - Central crossbeam with two folding lid halves, stainless steel grating below lid for reach-in protection, bolted and removable - Container mounted on stainless steel transport base with forklift pockets - DN50 disc valve outlet fitting, DIN1185, seal EPDM - Nameplate Agitator: Central anchor agitator Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTGMK/0.75-13 Power: 0.75KW Speed: 13 rpm Operating voltage: 3PH 400V Product-contacting parts: 1.4301 stainless steel - Gearbox by Getriebebau NORD - Heavy-duty agitator shaft with clamp coupling attached to agitator motor, detachable - Agitator shaft balanced for smooth operation within speed range - High-coverage stainless steel anchor agitator, welded construction, welds pickled, passivated, and brushed - Stainless steel flange with shaft seal, EPDM Agitator control: CEE plug switch mounted on the tank, on/off switch, no-voltage release, emergency stop Pre-wired

Tahun pembuatan: 2021, Kondisi: baru, The container scale manufactured by WeDi GmbH is used to record the fill level of roll-off containers. It consists of 2 drive-on ramps, measuring 1000 mm x 400 mm x 160 mm, made from 10 mm thick steel plates and including end stops with stiffening plates and struts, as well as lateral centering rails and mounting holes. There is 1 weighing beam, 100 mm x 100 mm, 2300 mm in length, constructed as a U-profile, 10 mm thick, with holes for mounting the load cells. Additionally, 1 weighing beam, 100 mm x 100 mm, 1400 mm in length, constructed as a U-profile, 10 mm thick, featuring mounting holes for the load cells; includes a 10 mm steel bearing plate, stiffening plates made from 10 mm steel, and 20 mm x 20 mm square steel for lateral guidance of the weighing beam. Weight measurement is carried out using 1 scale cell kit BKSB 15000 with a weighing range of 15,000 kg and readability of 2 kg, equipped with 4 x K30S 5000 load cells with spacer plates, 4 load feet, 1 junction and trimming box JBB-04, and a 10 m scale cable for the display electronics. Blodpfxogyph As Aiyoh The weighing electronics feature a BWI indicator, with an illuminated 50 mm large display, dimensions 250 x 160 x 60 mm. Housed in a high-quality, low-profile plastic casing with user-friendly operation. Basic functions: Tare, Zero, Gross/Net. After installation, the container scale is calibrated to zero = empty mass of Cat 3 container by us. Power supply: 220 volts. Price: €5,620 plus VAT.

Tahun pembuatan: 2003, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 03234, Mesin descaling dengan 6 sikat (3 pasangan) untuk kawat baja ukuran maksimum 5,5 mm – 16,0 mm (karbon rendah). Pasangan sikat diatur dalam offset 60 derajat untuk efek maksimal. Mesin tampak sangat bersih. Disarankan untuk melihat dan inspeksi di lokasi. Bodpfxsx R Uzdj Aiyolh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 300 kW (407,89 hp), berat keseluruhan: 65.000 kg, ukuran ban: 6*2, kondisi ban: 100 persen, kondisi penggerak: 100 persen, kondisi rantai: 100 persen, konfigurasi gandar: 3 gandar, kelas emisi: Euro 3, Tahun pembuatan: 2026, nomor mesin/kendaraan: V9638J96, Perlengkapan: hidrolik, komputer bawaan, penggerak semua roda, Sand- und Kiesaufbereitungsanlage | MINGYUAN Schwerindustrieausrüstung Eine Sand- und Kiesaufbereitungsanlage ist ein integriertes System zur Herstellung hochwertiger Baustoffe wie Sand, Kies, Splitt und künstlichem Sand. MINGYUAN bietet komplette Lösungen für das Brechen und Sieben von Zuschlagstoffen für Steinbrüche, den Bergbau, den Bau sowie Infrastrukturprojekte und gewährleistet dabei eine effiziente Materialaufbereitung und gleichbleibende Produktionsleistung. Allgemeine Beschreibung Die Sand- und Kiesproduktionslinie von MINGYUAN kombiniert fortschrittliche Brech-, Sieb-, Wasch- und Fördertechnik, um Rohmaterialien wie Kalkstein, Granit, Basalt, Flusskies und Quarz zu Baustoffsanden und Kies unterschiedlicher Körnung zu verarbeiten. Die Anlage umfasst in der Regel Backenbrecher, Prallbrecher, Kegelbrecher, Vibrationssiebe, Sandwaschanlagen, Bandförderer und Entstaubungsanlagen und bildet so ein vollständiges, automatisiertes Produktionssystem. Anwendung findet sie im Straßenbau, in Betonmischwerken, im Baustoffsektor und in Wasserkraftprojekten. Leistungsspektrum: 30–1.000 Tonnen pro Stunde (kundenspezifisch anpassbar) Aufgabekörnung: ≤800 mm (abhängig vom Brechertyp) Endkörnungen: 0–5 mm (Sand), 5–10 mm, 10–20 mm, 20–40 mm (Kies) Hauptausstattung: Backenbrecher (PE/PEX-Serie), Kegelbrecher, Prallbrecher, VSI-Sandhersteller, Vibrationsförderer, Vibrationssieb, Sandwaschanlage, Bandförderer, Steuerungssystem Energieversorgung: Elektrisch oder dieselbetrieben wählbar Automatisierung: PLC-Steuerung mit Echtzeitüberwachung und einstellbarer Kornverteilung Die MINGYUAN Heavy Industrial Equipment Co., Ltd. bietet komplette Lösungen für Sand- und Kiesaufbereitung mit zuverlässiger Leistung, wettbewerbsfähigen Preisen und professionellem After-Sales-Service für Kunden weltweit in der Bergbau-, Bau- und Zementindustrie. 2. Brechen und Sieben: - Die gewonnenen Rohstoffe müssen häufig gebrochen und gesiebt werden, um die Teilchengröße zu verringern und nach Korngrößen zu sortieren. - Brecher zerkleinern größere Gesteinsbrocken, und Siebe trennen das Material nach Korngröße. 3. Waschen: - Durch das Waschen werden Verunreinigungen wie Ton, Schluff und Staub aus den Rohstoffen entfernt. Dies ist besonders bei Zuschlagstoffen für den Bau wichtig. 4. Klassieren und Sortieren: - Nach der Wäsche werden die Materialien häufig klassiert und sortiert, um sie nach Kornfraktionen und Qualitätsstufen separieren zu können. 5. Lagerung und Haldenbildung: - Aufbereitete Materialien werden in Halden zwischengelagert. Geeignete Lagermöglichkeiten sind notwendig, um verschiedene Körnungen zu managen. 6. Förderung und Transport: - Förderbandsysteme transportieren die Materialien zwischen den verschiedenen Verfahrensstufen. Den Abtransport zur Verteilung übernehmen Lkw oder Förderbänder. Schlagworte Sandproduktionslinie, Kiesaufbereitungsanlage, Zuschlagstoff-Brecheranlage, Steinbrecher, Sandherstellungsmaschine, Sandwaschanlage, Vibrationssieb, Backenbrecher, Kegelbrecher, Prallbrecher, VSI-Brecher, Steinbruchausrüstung, Bergbaumaschinen, Baustoffzuschlagstoffe, künstlicher Sand, Splitt, Flusskies, Kalksteinbrecher, Basaltbrecher, Granitbrecher, Sandwaschanlage, Siebanlage, Fördersystem, MINGYUAN Sandanlage, Aufbereitungsmaschinen für Zuschlagstoffe, Steinbrechlinie, Sand- und Kieswaschanlage, Hochleistungsbrecher, Umweltfreundliche Sandanlage, Hersteller von Zuschlagstoffproduktionsanlagen. Blodpfx Ajq Nia Isiyoh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 210 kW (285,52 hp), jenis bahan bakar: listrik, warna: perak, berat keseluruhan: 27.000 kg, berat kosong: 27.000 kg, berat operasi: 36.000 kg, berat muatan maksimum: 50.000 kg, ukuran ban: 6*2, kondisi ban: 100 persen, konfigurasi gandar: 3 gandar, Tahun pembuatan: 2026, nomor mesin/kendaraan: MYM-J57C90, Perlengkapan: hidrolik, kebisingan rendah, track karet, de Bjdpfsq Nf Tvox Aiyjlh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 260 kW (353,50 hp), jenis bahan bakar: listrik, warna: merah tua, berat keseluruhan: 42.000 kg, berat operasi: 42.000 kg, kondisi rantai: 100 persen, konfigurasi gandar: 3 gandar, Tahun pembuatan: 2026, Möchten Sie einen Kostenvergleich zwischen Backenbrechern und Prallbrechern für einen bestimmten Abbruchprojekttyp oder eine Untersuchung der aktuellen Umweltauflagen für die Baustellenaufbereitung anfordern? Blsdpfx Aijq I Nvijyjh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, Produktübersicht der Industrie-Abfallholz-Paletten-Doppelwellenzerkleinerer Zerkleinerer werden im Allgemeinen zum Zerkleinern von schwer zerstörbaren Kunststoffen, Gummi, großen Reifen, großformatigen Nylonmaterialien, Fischernetzen, Fasern, Papier, Holz, Elektrogeräten, Kabeln, PET-Flaschen, Karton, Holz, Kunststofffässern usw. verwendet – also von festen Materialien. Die Hauptfunktion der Anlage besteht darin, sperrige Materialien und großvolumige Trommel-Metallmaterialien, die schwer zu transportieren sind, mittels Scherwirkung des Zerkleinerers zu verarbeiten und auf die geforderte Form und Stückgröße zu zerkleinern. Der Hauptaufbau des Doppelwellenzerkleinerers umfasst einen Einfülltrichter, Walzen mit Messern, einen Antrieb, Lager, ein Hydrauliksystem und einen Schaltschrank. Funktionsweise: Unterschiedlichste Abfallarten gelangen über den Einfülltrichter in die Zerkleinerungskammer. Die zwei Schneidwalzen drehen sich gegenläufig, zerschneiden und zerreißen das Material, das anschließend aus dem Zerkleinerer ausgetragen wird. So wird eine effektive Zerkleinerung auch von großformatigem Material erzielt. Bsdpfxevn D I Nj Aiyelh Einsatzbereiche und Materialien Der Doppelwellenzerkleinerer ist eine essentielle Maschine für die Abfallverwertung in folgenden Bereichen und für folgende Stoffe: + Sperrmüll: Sofa, Matratze, Stuhl, Möbel, Fenster usw. + Industrieabfälle: Textil, Leder, Gummi, allgemeine Industrieabfälle usw. + Gefährliche Abfälle: Medizinische Abfälle, Farbschlämme, radioaktive Abfälle, Altöltonnen, Big Bags usw. + Papierabfälle: Karton, Wellpappe, Bücher, Zeitungen, Akten, Broschüren, Verpackungspapier usw. + Gartenabfälle: Äste, Holzpaletten, Stämme, Bretter usw. + Haushaltsabfälle & Biomasse: Stroh, Bambus, Maisstroh, Sorghumstroh, Bohnenstroh, Nussschalen, Kokosnussschale usw. + Metallschrott: Karosserien, Aluminiumguss, Haushaltsgroßgeräte, Leichtmetallschrott, Felgen usw. + Papierfabrikabfälle: Siebreststoffe, Drahttrossen, Randabschläge der Papierproduktion usw. + Holzpaletten, Altmöbel, ausgediente Stühle, Baumwurzeln usw. Hauptgehäuse des Doppelwellenzerkleinerers: Das Maschinengehäuse ist aus hochwertigem Stahlblech geschweißt und garantiert damit dauerhafte Standfestigkeit auch unter hohen Belastungen. Lager: Die Lagergehäuse sind geteilt und dadurch einfach zu demontieren – bewegliche Messer, Festmesser, Lager und andere Komponenten lassen sich schnell ausbauen und warten. Die Dichtstruktur verhindert das Eindringen von zerkleinertem Material und Schmierstoffen und schützt beim Zerkleinern von Flüssigkeiten zusätzlich Lager und Getriebe.

Kondisi: baru, Tahun pembuatan: 2026, de Bedpeq N Ud Ijfx Aiyelh

Kondisi: sangat baik (bekas), I am offering a professional sinus magnetic chuck from the renowned German manufacturer K. JUNG GmbH Göppingen. This device is designed for precise clamping of workpieces during grinding, measuring, and toolroom operations. Specifications: • Manufacturer: K. JUNG GmbH Göppingen • Type: Sinus magnetic chuck (tilting) • Magnetic workpiece clamping • Adjustable tilting angle with angular scale • High-precision workmanship • Solid cast iron construction • Original wooden transport case Included: • Magnetic chuck Bljdpfeza Hl Ejx Aiyjh • Original wooden box • Documentation and setting chart • Clamping elements as shown in the photos • Service wrenches Condition: • Used equipment • Magnetic surface in very good condition • Normal signs of use and storage • Complete set as seen in the photos Ideal for: • Tool grinders • Surface grinders • Toolrooms • Precision workshops • Production and maintenance departments The item for sale is exactly as shown in the photos.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, daya: 9,7 kW (13,19 hp), en-001 Bsdou Tha Ispfx Aiyolh

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 3.641 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 36 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.080 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, daya: 15 kW (20,39 hp), laju aliran volumetrik: 90 m³/jam, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of manufacture: 2010 Operating hours: 3,641 hours Main press force: 36 t Specific pressing force: 467 N/cm² Feed opening dimensions: 1,080 x 1,100 mm (L x W) Cycle time: 34 seconds Filling volume per cycle: 0.85 m³ Theoretical throughput: 90 m³/hour Throughput under operating conditions with a material bulk density of 35 kg/m³: approx. 51 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 15 kW Tying: 4-fold vertical, semi-automatic, with polyester twine Throughput rates at a bulk density of: – 35 kg/m³: 1.8 t/hour – 60 kg/m³: 2.5 t/hour – 100 kg/m³: 3.1 t/hour Transport dimensions (baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine weight (baler): approx. 4 t Notes: The baler has been function-tested in our workshop, subsequently stored, and is therefore available at short notice. Full machine documentation (operating manual, CE declaration, electrical and hydraulic schematics) is available. Bodpfx Aisu Thh Eeyjlh Viewing by appointment possible. No liability is accepted for the accuracy of the technical specifications or any possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. Bledpfjvf E Avsx Aiyoh - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: siap digunakan (bekas), Production line for cell stacks for 48V hybrid vehicle batteries Aumann production line for cell stacks for 48V Generation 2 batteries – year of manufacture 2023, low hours of operation Assembly – Inspection – Testing – Installation of cell stacks into housings for hybrid vehicles. Manufactured in 2023 and only lightly used. Some units are assembled, others are in as-delivered condition. Blodszavwdspfx Aiysh Maximum Battery Size Dimensions: 363 × 175 × 140 mm Maximum Capacity Standard/Performance – 8 Ah / 17.5 Ah The system consists of 7 linked units. Two pictures are available for each system/unit – each with a separate handout. Please provide your offer price!!! Technical specifications can be found in the handout. All warranty rights are excluded. We do not guarantee the accuracy of the technical data and year of manufacture, the completeness of accessories and tool equipment, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sale to private individuals.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, The (fish-type mask) mask production machine offered here combines efficiency and safety features with an optimized fit. These product features are achieved, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touchscreen for simple and clear operation, as well as an optimized and robust steel unwinding unit. Process steps at a glance: - Feeding of filter fleece via an edge control system and nasal wire, uniform welding of the mask followed by folding and separation of the mask body. - The next process step is the attachment of the ear band using ultrasonic technology. Optionally, camera inspection, stacking unit, and a flowpack machine may be ordered additionally. Details: - Welded unwinding unit with a total of 4 manual expanding shafts, magnetic powder brakes, and web edge control system for feeding the filter fleece. - Nasal wire feed is accomplished by an additional unwinder. - The use of discs in combination with slim aluminum profiles provides good visibility into production with full operator protection at the same time. - Upon request, we offer various printing systems to print legally required information onto your mask. - Use of ultrasonic technology and durable materials such as titanium ensures increased machine availability compared to conventional materials. - High precision due to servo-driven motors. - Consistent material feeding and guidance, as well as separation by a rotary cutter with side scrap discharge. - High-resolution, operator-friendly HMIs with touchscreen. - Mask body welding with ultrasonic technology with subsequent folding die and welding of the top and bottom surfaces. - Precise separation of the mask from the scrap using a rotary cutter, followed by dispensing the mask and side discharge of the scrap. - Subsequent ear band bonding by ultrasonic technology. - Optional: Camera inspection with good/bad part detection - Optional: Subsequent discharge to a stacker Blodpfoh Uuhcjx Aiyjh - Optional: Transfer to a flow-pack station for individual mask packaging Performance data & dimensions: - Power consumption: approx. 4-5 kW during operation - Power supply: 220 V / 50 Hz - Output: 80 masks/minute - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200x5000x1800 mm (LxWxH) - Mask dimensions closed (longest and widest point): 205 x 82 mm (+- 2mm) We will be happy to send you an individual, high-quality system offer. Please provide your company details in advance.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to the minimal drop height, product damage is effectively avoided, ensuring the quality of your goods—even for sensitive products. Flexible and Efficient Operating Principle The core of our technology is a simple yet highly effective concept: Products are transported via linear conveyor belts or vibratory lanes and dosed precisely into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), each stage programmable individually Bsdpjwymlyjfx Aiyolh - Tool-free format change - Intuitive design allows quick changeovers and straightforward cleaning - Gentle handling: reduced drop height protects sensitive and fragile products - Versatile: suitable for both food and non-food sectors - Accurate dosing ensures consistent product quality - Robust and hygienic: all parts made from stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance needs With our linear scale, you get a reliable, precise, and hygienic solution to make your production processes more efficient. Technical Data - Weighing range: 20g to 2000g - Accuracy: up to 0.5g, depending on product - 4.5-liter weighing containers - Max. speed: 30 weighings/min (2-head scale) - Material: Stainless steel 304 - Power supply: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, including mixing systems for blending 2-4 products) - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control directly at the machine or remote operation via network connection, optional live camera upgrade) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Specialized scales for stick-shaped products (e.g., pretzel sticks) including product alignment - Weighing systems for large products such as salads - Fine weighing systems with accuracy up to 0.1 grams - Auger fillers (single-stage or two-stage weighing) and powder filling (accuracy of 0.3%-1%, including automatic recalibration when integrated with a weighing system) - And much more.

Kondisi: sangat baik (bekas), Weiss Spray Water Test System Model: SWT 600/800-S Manufacturer: Weiss Umwelttechnik GmbH For sale is a professional spray water test system by Weiss Umwelttechnik. The unit is designed for standardized water, spray water, and ingress protection (IP) tests according to IPX1, IPX2, IPX3, IPX4, IPX4K, and IPX9K. Ideal for industrial applications, automotive, electronics, quality assurance, development, testing laboratories, as well as research and materials testing. Operation is via an integrated touch control panel. Test sequences can be performed automatically. System Details Manufacturer: Weiss Umwelttechnik GmbH Model: SWT 600/800-S Spray Water Test System Test Types: - IPX1 - IPX2 - IPX3 - IPX4 - IPX4K - IPX9K Stainless steel test chamber Rotating test table Swivel arm system Water circulation Inclusive test accessories Electrical Data Supply voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Bsdpfxszachco Aiyjlh Circuit diagram no.: 82962 CE marking present Water Supply Water inlet: R 3/4" Water outlet: R 1 1/4" Supply pressure: approx. 2 to 6 bar Test pressure IPX9K: adjustable, approx. 80 to 100 bar Technical Data Turntable speed: approx. 1 to 5 rpm Swivel speed: approx. 60°/s Permissible ambient temperature: approx. 10 °C to 35 °C Noise level: approx. 88 dB(A) Heat emission to surroundings: Average approx. 1 kW Maximum approx. 3.5 kW Equipment - Touch control panel - Stainless steel test chamber - Rotating test table - Swivel arm - Water circulation pump - Nozzle ring / spray ring - High pressure unit - Flow meter - ESD earth bonding point - CE marking - Heavy-duty industrial design Dimensions / Weight Test chamber SWT 600/800: Approx. 2,350 x 2,400 x 2,650 mm Test chamber without hinges and door lock: Approx. 2,350 x 2,400 x 1,850 mm Test chamber weight: approx. 650 kg High pressure unit dimensions: Approx. 850 x 1,200 x 800 mm High pressure unit weight: approx. 380 kg Total weight: approx. 1,030 kg Documentation - Operating manual - EC Declaration of Conformity - Quality test certificate - Technical documentation as shown in pictures Accessories - Nozzle ring / spray ring - Test and spray components - Swivel arm accessories - Flow meter - Connection components - Tools and keys - Documentation and records Condition Used system from industrial application. Visual condition as per pictures. The system can be switched on. Display and operating interface are functional and visible. No further technical inspection, calibration, or full functional testing has been performed. On-site inspection and testing possible and encouraged by prior appointment. Scope of Delivery - Weiss Umwelttechnik SWT 600/800-S spray water test system - High pressure unit - Rotating test table and swivel arm - Test and spray accessories as per pictures - Operating manual and documentation - Accessories as shown in pictures The table shown in the pictures is not included in the scope of delivery. Loading after consultation possible. Transport and shipping require suitable carrier. Dimensions, weights, and technical data are partly taken from documentation. Information may differ. Commercial sale with no warranty or guarantee. Subject to changes, errors, and prior sale.

Kondisi: bekas, 5tSWF Crane Technology Ltd. Bjdpfedc A R Tox Aiyelh

Kondisi: bekas, Tahun pembuatan: 1994, Technical Details: Welding current continuously adjustable: 40...400 A Length: 900 mm Height: 1200 mm Total power requirement: 13.8 kVA Machine weight approx.: 180 kg Space requirements approx.: W:0.6xL:0.9xH:1.2 m MIG MAG WELDING UNIT – Welding rectifier for spare parts - Power range 40A/15V to 400A/34V - Open-circuit voltage - 58V Blsdpfx Aieu Nwx Ueysh - Characteristic: Constant - Protection class: IP 23 - Insulation class: F - Water cooling Control board A5 missing

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: x-travel: 690 mm y-travel: 400 mm z-travel: 550 mm B-axis (table): 360° Bsdpfx Aiou Idl Soyolh Control: Siemens 840 D Spindle speed: max. 15,000 rpm Tool clamping: system according to DIN 69893 Tool holder: HSK-A63 Tool magazine: chain magazine, 12 positions Rapid traverse (x/y/z axes): 40 m/min Total power requirement: 195 kW Machine weight approx.: 13.0 t Travelling Column Machining Centre - The WZR unit consists of 3 NC machining axes and 1 NC rotary table axis - With rotary table type SKH-NC 4/029; Ø=460 mm; clamped table plate Ø500x20 mm; max. rotation speed 22 rpm, 4x 90° indexing - SIEMENS control panel - Spindle type: DRF-WE-255-N-W-15-30, 15,000 rpm, spindle power = 30 kW - Chip conveyor Knoll type 400K-3/280; discharge height 1150 mm - Cooler for spindle cooling, manufacturer SCHIMBKE type DK 80 V; 3.36 kW int.

Tahun pembuatan: 1998, Kondisi: bekas, Technical details: Profile width: 50 mm Working height: 950 mm Interface: RS 232 Pinout Window profile processing machine Suitable for materials such as PVC, aluminium and wood windows in a continuous processing operation. Materials are conveyed via a pneumatic transport and clamping system. The system consists of two workstations (machines), one electrical control cabinet, an operator panel, and transport units. Also included are a stand with a vibrating transport system, chip conveyor unit, and a stand with acknowledgement printer. Our photos are shown first at the current location, followed by additional photos demonstrating the system prepared for transport and for sale. Workstation No. 1 (Machine 1): - Sawing station with saw blade Ø 400 x 4.5mm - Drilling unit with collet chuck (vertical, upward) - Drilling unit with collet chuck (horizontal) - Drilling unit with collet chuck (vertical, downward) - Twin drilling unit with collet chuck (vertical, downward) - 45° drilling unit with collet chuck (upward) Workstation No. 2 (Machine 2): - Drilling unit with collet chuck for screw connections (vibratory bowl) (vertical, upward) - Horizontal milling spindle with 11 disc cutters - Triple drilling unit with collet chuck (vertical, downward) - Triple drilling unit with collet chuck (vertical, upward) - Triple drilling unit with collet chuck (horizontal) Bjdpou Ibuwofx Aiyslh 2 motor-driven transport units: - LxWxH: 5,650 x 2,400 x 1,000 mm - Track width 1,980 mm 2 motor-driven transport units: - LxWxH: 2,150 x 2,750 x 1,050 mm - Track width 2,300 mm

Kondisi: bekas, Technical Details: X-travel: approx. 1000 mm y-travel: 400 mm Bjdpfx Aju Idnmsiyelh z-travel: 420 mm Control: Siemens Sinumerik 805/810 Thread cutting up to max.: M 22 Drilling capacity in St 60 - solid drilling: 25 mm Milling area: Performance in St 60: 150 mm Saw stroke: approx. 55 mm Speed range - stepless: 20-6000 rpm Operating hours (manual): 26,180 h Tool turret: 12 positions Tool holder: SK 40 Total connected load: 18 kVA Machine weight approx.: 5.0 t Machine dimensions LxWxH: 2.9x2.5x2.8 m Transport dimensions (machine): 2.4x2.6x2.75 m Equipment: - Special equipment/fixture (modular clamping system) for milling profile materials, including automatic cut-to-length device for workpieces using a circular saw module (non-functional) - Horizontal workpiece clamping (force-fit) with vise clamping system and parallel strips (currently approx. 80 mm) - Tool changer type: Chiron basket tool changer - Mechanical tool clamping, clamping force 5000N - Chip conveyor, make: Knoll - Loading and unloading system: FMB LM RP 3000 The machine is not operational. Sale at clearance price only.

Kondisi: bekas, Technical details: Sheet thickness: 1 mm Gap between uprights: 2,255 mm Maximum bending angle: 130 ° Total power requirement: 2.25 kW Machine weight approx.: 1,400 kg Machine dimensions approx. (LxWxH): 2.7 x 1.15 x 1.3 m Machine without foot switch, but pre-wired for one. The previous owner retrofitted the upper beam for 60 mm adjustment; greater heights only possible by reverting the modification. Foot control is missing for automatic operation. Bedpfx Aowq I U Rjiyjlh Manual operation is functional. No back gauge.

Kondisi: bekas, Tahun pembuatan: 2010, en Blodpfxeytcf Uo Aiysh