Beli Timbangan Hingga 3.000 Kg bekas (66.791)

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, nomor mesin/kendaraan: 1018, jenis kontrol: Dikendalikan oleh PLC, tingkat otomatisasi: manual, jenis aktuasi: listrik, Diameter pipa (maks.): 50 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 3 mm, Sudut pembengkokan (maks.): 195 °, radius pembengkokan (maks.): 250 mm, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring manual quick-release excenter clamping for tube fixation, enables efficient bending processes. The compact drive unit with a removable mandrel holder offers advantages for on-site assembly. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is easily and quickly set via a user-friendly touchscreen control with menu-guided interface. The advanced control system allows for two speeds and a programmable overbend function to compensate for material springback. The bending cycle time is significantly reduced thanks to the automatic "retract" function at the end of the bend. For complex bending tasks, programs can be saved, supporting sequences of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be stored on the controller or via USB stick. The plug-in bending tools enable rapid changeover to other tube sizes. For challenging geometries, the machine’s bending direction can easily be reconfigured for standard right or left bending. The open bending unit allows, for example, the bending of railing frames with only one weld seam. Optional PC-based calculation software provides cut length calculations for the entire geometry as well as feed, twist, and bending angles for each bend. The mandrel retraction is programmable and can be actuated automatically before reaching a preset bending angle. POSSIBLE APPLICATION AREAS: • Plant engineering, e.g. chemical industry • Hydraulic pipework • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Min/max bending radius: 10 mm/140 mm • Bending radii: 2 x D • Multifunctional machine control, bend angle adjustment (0.1° increments) • Mandrel holder lengths: 1500/3000/4500/6000 mm (special versions available upon request for longer lengths) • Maximum bend angle: 180º • Weight: 300–500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimum quantity) • Digital measurement for length and rotation (resolution 0.1) • Remote operation of all functions via traversing unit (rotation and length stop) • Bending radius up to 250 mm • PC-based tube calculation software OUR SERVICES: • Welcome to testing and trial production in our in-house demo room • On-site consultation and information discussion Ncsdpfenfvy Uex Aa Ujt • Consulting and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Dikendalikan oleh PLC, jenis aktuasi: listrik, Diameter pipa (maks.): 100 mm, Panjang pipa (maks.): 6.000 mm, Ketebalan dinding tabung (maks.): 8 mm, Sudut pembengkokan (maks.): 195 °, tekanan (maks.): 250 batang, masa garansi: 24 bulan, Perlengkapan: Penandaan CE, henti darurat, kendali jauh kaki, perangkat ganti cepat, sistem pelumasan terpusat, THE COST-EFFICIENT MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system offers solutions for pipe diameters ranging from 15 to 100 mm, enabling the processing of complex geometries with standard bending radii of 2xD. Depending on material quality and wall thickness ratios, radii as tight as 1.5xD can also be reliably achieved in series production. The 120 mm tool height provides ample scope for special profiles. The highly precise and powerful electric drive of the bending axis, combined with the robust, rigid construction of both the mandrel holder and bending arm, ensures optimal bending results. Quick-change bending tools allow for rapid conversion to different pipe sizes. The clamping pressure for the pipe holder can be optimally adjusted. The PLC control (expandable via USB stick) comes with data storage and the latest X2X interface and can store virtually unlimited programs for bending angles, length dimensions, and rotation angles for up to 50 bending sequences per pipe length. An easily programmable database monitors springback values for up to 200 materials. The control has two operating modes: In 'Simple Bending', the length and twist of the arcs relative to each other are displayed automatically. In 'Controlled Bending' mode, the data is preloaded, and a continuous target/actual comparison is carried out during bending. Also available with pneumatic rotary stop or with gear-assisted length and twist positioning. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemicals industry • Hydraulic piping • Metalworking • Prototyping • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) Ncedpfxsnh R Sue Aa Uet • Min/max bending radius: 40 mm / 250 mm • Min bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel holder lengths: 3000 / 4500 / 6000 mm • Maximum 180º bending result • Weight: 1600–3200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic minimal-quantity mandrel lubrication • Pneumatic or hydraulic quick-release chuck • Larger bending radius up to 300 mm • Length and rotation positioning via automatic brake function or via manual stops with foot switch • Semi-automatic length and rotation positioning via servomotors • Automatic tool retraction • Pipe calculation software • 10-inch touchscreen with integrated pipe calculation • Data transmission via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome to trial production in our in-house demo room • Consultation and information meeting at your site • Consulting and handling of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm—either stationary or directly at the assembly site. A robust three-phase motor and precision gearbox ensure powerful drive performance. Position detection directly on the bending axis provides optimal bending accuracy. Setting the bending angle is quick and easy via a user-friendly, menu-driven touchscreen interface, ensuring even more intuitive operation. For more complex bending operations, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction controller allows variable adjustment of the bending speed for forward and return movement, and features a programmable overbend function to compensate for material springback. Utilizing four material characteristic curves, the system automatically overbends the material to the required bending angle, delivering highly accurate bending results. The “stationary tube, rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to produce bends with minimal deformation in materials such as stainless steel and copper. With the PB20 profile bending attachment, flat, square, and round bars can be easily bent. The KBV small-radius bending device allows for extremely tight bend radii. POSSIBLE APPLICATIONS: • Plant engineering • Hydraulic piping Njdong Ax Sspfx Aa Ujct • Meander bending • Prototype construction • Plumbing and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Min./max. bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with 0.1° angle adjustment • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Roller bender RB43 – mounts on the hex shaft of the bending axis. By switching to continuous bending mode, the bending system acts as a drive unit. • Small-radius bending device KBV • Special tools available on request OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and information session at your premises • Advice and processing of leasing/financed purchases • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: bekas, We are offering a used drive-through scale for sale. TECHNICAL DATA Manufacturer: Kern Model: NFB 600K200LM Weighing range: 600 kg with evaluation unit Weighing platform dimensions: 1,200 x 1,200 mm Platform dimensions: 1,800 x 1,400 mm Readability: 0.2 kg Weight: 235 kg Condition: used PRICING Price: €695.00 net per unit Price: €825.05 gross per unit incl. VAT YOUR CONTACTS: Tanja Henkelmann Rainer Nürenberg Oliver Kopp TERMS OF PAYMENT Payment terms to be agreed upon in case of order. The price is per unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses as well as machinery for commerce, industry, and trades. Nsdpfey Ep Thex Aa Usct We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. Vier gewinnt – The four pillars of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever rack: bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Includes horizontal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension always possible) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 3,000 mm Njdpfomhhx Iex Aa Uect - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Fastening material included (floor anchors not included) - Includes assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notification before delivery. The material is carefully packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchors, and able to accommodate the acting loads. The customer is responsible for checking and ensuring the floor quality, load-bearing capacity, and for obtaining any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional association recommendations, the rack uprights should have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright. Ncedpfxsmhh Ans Aa Uot

Tahun pembuatan: 2024, Kondisi: baru, oris- Extruder MINI ESE 20/25 D Technical Data Screw diameter [mm]: 20 Screw length [L/D]: 25 Screw speed [rpm]: 20–200 min⁻¹ Screw axial pressure [bar]: 300 (continuous operation), 350 (maximum) Drive: Three-phase motor with frequency converter Drive output [kW]: max. 2.5 Reduction gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590* Electrical connection values: 3 / N / PE Supply voltage [V]: 400 at 50 Hz Control voltage [V]: 230 Temperature control: electric resistance heating bands with mica insulation Max. processing temperature [°C]: 300 Ncsdohx Elfjpfx Aa Ujt Control cabinet and control panel The electrical installation of the extruder is housed in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; water connection must be provided by the buyer, and a chiller unit for water cooling is not included in the offer. Extruder tooling is not included in the offer.

Kondisi: baik (bekas), Tahun pembuatan: 2014, Pabrikan: DEMAG Nsdpjyu R Dzsfx Aa Usct Kapasitas beban: 860 kg + 630 kg (dilengkapi dengan dua crane) Dimensi teknis yang tepat ditunjukkan pada gambar Rel crane dapat diperpanjang dengan struktur dan kaki yang ditunjukkan pada gambar, namun, elemen rel lain juga diperlukan untuk perpanjangan, yang tidak tersedia!!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 20.331 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 970 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 33.000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baling press from the manufacturer HSM, type VK 8818 R-FU incl. conveyor technology and wire tie stations. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we assume no liability. Technical specifications of the press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Main press force: 1000 kN Specific press force: 120 N/cm² Cutting edge ejector press force: 121 kN Feed chute dimensions: 970 x 1,800 mm Theoretical cycle time in idle: 8.3 seconds Theoretical throughput: 643 m³/hour Nedpfx Aasyz Af Ee Usct Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Connected load: 110 kW Total power consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput at a bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor system: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of press: approx. 33 t (main press: approx. 12 t, press channel with bale clamp: approx. 10 t) Additionally ordered special equipment: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with equal performance Manual enabling/disabling of the number of wire-tie circuits to save tying wire with non-expansive materials Cutting edge ejector with 121 kN press force Sensor-based wire monitoring, with press shut-off in case of wire break or end of wire Bale chute Visual warning signal mounted on the control cabinet Condition of the press: The complete press system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned weekly by the operator, greased and maintained in accordance with the manufacturer’s guidelines. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Maintenance platform - Bale chute - Wire redirecting stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Transverse sliding belt conveyor - Pit cover from feed conveyor to pit - Second control cabinet for operating the press at the conveyor - Machine documentation in English Delivery time: The entire system is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other presses is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 6034, jarak pergerakan sumbu X: 7.200 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 590 mm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 25 m/menit, pergerakan cepat sumbu Z: 25 m/menit, daya nominal (semu): 45 kVA, produsen pengendali: HEIDENHAIN, model controller: Bahnsteuerung iTNC 530, tinggi total: 2.900 mm, panjang total: 12.500 mm, lebar total: 4.810 mm, berat keseluruhan: 14.000 kg, kecepatan spindel (min.): 100 rpm, kecepatan spindel (maks.): 12.000 rpm, tekanan kerja: 7 batang, The BZ 7000 is intended exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastic, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 - Year of manufacture: 04/2008 - Control system: HEIDENHAIN iTNC 530 path control - 4 axes - Travel X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Weight: 14t Equipment Nedpfxoyzxfno Aa Usct - Sturdy base frame in welded construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X axis (50 m/min) via rack and pinion drive - Y and Z axes (25 m/min) via ball screw - B axis 9000°/min - Swiveling operator panel - Automatic centralized lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 –25 -25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc magazine with 12 SK 40 tool positions - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed correction: 80 – 120 % - Drilling capacity in St60/Alu: up to 28mm Ø - Thread cutting capacity in St60/Alu: up to M24 - Measurement system: rotary encoder / length measurement system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V24/RS-232-C - Travel X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB(A)

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 1.500 kg, Perlengkapan: kendali jauh kaki, 3 Poros PEMA Meja Las APS 1500 - Ketinggian dapat diatur tanpa tingkat - Termasuk remote control manual - Beban maksimum 15.000 N - 1.500 kg - Kecepatan putar 0,07 - 1,3 rpm - Torsi rotasi 1.000 Nm - Kemiringan hidraulis hingga 135° - Momen kemiringan 3.000 N - Arus las maksimum 700 A - Diameter pelat 700 mm - Tinggi 780 - 1.550 mm - Dimensi 1.640 x 810 mm - Sambungan 3 x 400 V / CEE 16A - Berat 730 kg Nodpfoyupd Hex Aa Usct

Kondisi: hampir baru (bekas), Staff Ice System BTX150 Mesin Pembuat Es Batu / Pembuat Es 150 kg/24 jam, Tahun 2022. Data Teknis: Gelato BTX150 A Staff Ice System Mesin pembuat es krim untuk produksi dan penyimpanan es krim. Produksi dan penyimpanan es krim. Ekstraksi otomatis. Pengaduk dengan bilah polietilena tahan lama. Tutup ganda memungkinkan penambahan bahan selama proses. Tangki vertikal untuk kontrol penuh atas transformasi proses. 50 program operasi yang dapat disesuaikan. Spesifikasi Teknis: Kapasitas produksi maksimum 2 liter es krim per siklus. Produksi es krim 15 l/jam. Dimensi 43,5 x 59,2 x 59,5 cm. Ncjdpfxsyzc Rus Aa Uot

Kondisi: baru, Tahun pembuatan: 2025, Persiapan Media Peledakan 1x Lubang Pembersih 1x Elevator Ember 1x Separator Angin 1x Ayakan Getar Listrik 1x Bunker Media Peledakan Nedpfx Aaow Ivvcs Ujct 1x Mesin Peledak Tekanan 200l 1x Selang peledak, nosel peledak, saklar darurat (Deadman), kabel kontrol 1x Lemari Kontrol Aksesori opsional: - Sekrup transportasi melintang sepanjang lebar ruang sandblasting (juga dapat digunakan sebagai silo cadangan tambahan untuk proses peledakan berjam-jam) - Ekspansi untuk 2 media peledakan: ferit dan mineral - Drum separator magnetik - Tahap demagnetisasi akhir - Laci magnet

Kondisi: baru, Tahun pembuatan: 2025, High Cube Basic Blasting Container with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + additional blasting vessel capacity for extended blasting operations without refilling. Type: SC.20FHC.5800 Basic Standard equipment, ready for operation: (Simply fill abrasive media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo controller - 1x Pressure blasting pot - 1x Pressure regulator and water separator - 1x Blasting hose DN 25 with 8mm blast nozzle - 1x Remote control with dead man’s switch - 1x Feed chute/Hopper for abrasive media - 1x Abrasive sieve + coarse particle catchment container - 1x Rising air separator for blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall with louvered impact separator Ncjdpfx Aajw Ivk To Ust - 1x 4mm fabric-reinforced rubber wall lining - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, end-of-door switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Options: - Side Door Open: Container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane runway 500kg - C-profile rail for powder coating applications - Blasting trolley - Filter with Big Bag - HEPA post-filter for hazardous dusts (e.g., when blasting stainless steel) - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tekanan: 6 batang, masa garansi: 60 bulan, lebar dalam: 5.000 mm, panjang dalam: 15.000 mm, tinggi dalam: 5.000 mm, luas filter: 352 m², laju aliran volumetrik: 22 m³/jam, Perlengkapan: dokumentasi / manual, pencahayaan, Blasting house *up to 5 years warranty* for all blasting media made from a steel structure/insulated panels with filtration system, recirculation system, abrasive recovery, 200l pressure blasting vessel with automatic refilling, blasting hose with dead-man control, breathing air system, LED lighting, wall cladding 70 Shore 4mm fabric-reinforced rubber, sweep pit with bucket elevator. Abrasive recovery via sweep pit with bucket elevator, upgradeable to crosswise screw conveyor with dosing hood across the full width as sweep pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with an appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different abrasives (ferritic and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air separator for abrasive separation and cleaning. Safety features: emergency lighting with battery, emergency stop switches inside the cabin and outside, inspection window to blasting chamber, door/gate limit switches, dead-man control, quick venting for pressure vessel. Warranty up to 5 years on various components. Nsdpfx Asu Hy Tpja Ujct 50 years of experience and more than 3,000 installations in blast room plant engineering.

Kondisi: baru, Tahun pembuatan: 2026, Gerobak sandblasting 5t penggerak baterai untuk instalasi sandblasting - Kapasitas muat 5t - Untuk sistem rel - Penggerak baterai - Remote control Njdpeyyxidefx Aa Uoct - Ukuran: P = 3000 mm, L = 1000 mm - Area untuk pemasangan dudukan benda kerja

Kondisi: baru, Tahun pembuatan: 2026, Gerobak sand blasting 10t untuk instalasi sand blasting dengan penggerak pneumatik. - Penggerak pneumatik untuk beban 10t - Kapasitas muatan 10 t Nsdpjyyxfrsfx Aa Ujct - Ukuran: P=2000mm L=2000mm T=500mm - Untuk sistem rel - Dengan permukaan penampang untuk dudukan benda kerja - Meja putar sebagai opsi

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Gerobak sandblasting manual untuk instalasi sandblasting, kapasitas muatan 5 ton - P= 3000 mm, L= 1500 mm, T= 500 mm Nedpeyyxa Nsfx Aa Ujct - Kapasitas beban: 5 ton - Gerobak sandblasting dengan roda flens untuk rel di ruang sandblasting - Profil berdiri tegak agar media blasting dapat mengalir - Telinga tarikan untuk forklift - Meja putar tersedia sebagai opsi

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 6.500 kg, Load capacity: 6,500 kg Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (extendable) Ncodpfswd Twqjx Aa Ujt Space-saving and infinitely adjustable; the extension arms can be locked in position Speed continuously variable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Maximum current transmission: 2,000 A Weight: 4,700 kg Supplied with hand and dual-foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Includes original sales invoice from 2016 Current new price approx. €28,000

Tahun pembuatan: 2020, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan pipa KD bekas ini dengan diameter 315mm, pipa limbah KG 2000 KG, warna hijau, tahun pembuatan 2020. Sekitar 70m, panjang pipa 5m, berbagai jenis elbow, sambungan Y, dll. Rentang suhu: -20 hingga 90 °C Material seal: cincin karet sesuai DIN EN 681 Warna: hijau muda RAL 6017 Bahan: Polipropilena (PP) Kekakuan cincin SN: 10 kN/m² Kedap air (dijamin hingga): 7,0 bar Nsdsyyml Topfx Aa Uect Ketahanan kimia (rentang pH): 2 hingga 12 pH Konduktivitas termal: 0,04 W/(K·m) Koefisien muai panjang: 0,08 mm/(m·K) Modulus E jangka pendek: 2500 N/mm² Modulus E jangka panjang: 450 N/mm² Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: baik (bekas),

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale is a copying milling machine made by Franz Kuhlmann KG, model series GM ½. The machine is fully functional and ready for immediate use. Technical data: X-axis (Longitudinal travel): 330 mm Y-axis (Transversal travel): 200 mm Z-axis (Vertical travel): 280 mm Template table: 500 x 400 mm Spindle speeds: 4,200 – 20,000 rpm Spindle mount: Collet chuck bore up to 8 mm Nedjwal Dhopfx Aa Uect Motor power: 0.5 kW Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) Weight: 430 kg Transport and loading can be organized across Europe at extra cost, if required. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be glad to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you in need of a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your equipment? For further information or contact options, please visit our website.

Kondisi: hampir baru (bekas), Fungsionalitas: tidak berfungsi, kapasitas angkut: 6.500 kg, Load capacity 6,500 kg Ncsdpfx Ajx Thucea Uot Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (pivotable) Space-saving and continuously adjustable; extension arms can be locked in place Speed continuously adjustable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Maximum current transmission: 2,000 A Weight: 4,700 kg Includes hand and dual foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Includes original offer invoice from 2016 Current new price approx. €28,000

Tahun pembuatan: 2015, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED INSERTING UNIT FOR METAL SHEET REINFORCEMENTS This system is part of a larger production line; please refer to our other listings for more details. The offered equipment includes 3 staging areas for cover layers, an automated adhesive application machine for sandwich panel bonding, a conveyor belt for manual assembly of inlays/ribs, gantry systems for handling the cover layers, and an automated inserting unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm Ncjdpeyt Nm Ssfx Aa Uet MATERIALS (from previous production): GRP, Sheet metal, Plywood, Timber/PU battens, PVC, Styrofoam ADHESIVE GANTRY FOR CONTOUR & SURFACE BONDING (of cover layers & inlays): Number of area needle valves: 104 Number of contour needle valves: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Climate-controlled cabin (for storage of 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Kondisi: sangat baik (bekas), Steady rest (28388) SPH 360 mm Weight: 37 kg Njdpfjmkfd Sex Aa Uoct Dimensions: see drawing