Beli Weg 1985/1570/H1780 Mm bekas (78.410)

Kondisi: baik (bekas), Data teknis untuk balok rak pallet: Sistem rak: SSI Schäfer Tipe: PR350 Paket termasuk: 01x balok rak pallet, bekas Warna material: biru Jenis balok: TRN1-270-08-l Profil INP: 80 x 42 mm Pengait: 5 HK (kait) Jarak dalam: 2.700 mm 02x pin pengaman, bekas Eksekusi: sepenuhnya galvanis Untuk pengamanan balok memanjang terhadap pengangkatan yang tidak disengaja Bedpoy Am Dzefx Am Islg Kontak Anda di perusahaan kami: Bapak Andre Evering Bapak Mario Klöver Bapak Falk Deutsch Informasi umum mengenai produk: Produk ini hanya ditawarkan untuk pengambilan sendiri. Pengiriman atau transportasi yang diinginkan di luar hal tersebut akan dikenakan biaya tambahan yang dapat dikonfirmasi secara terpisah sesuai lokasi pengiriman dan volume pengiriman.

Kondisi: baik (bekas), Data teknis mengenai balok rak palet: Sistem rak: META Thyssen Termasuk dalam pengiriman: 01x Balok rak palet, bekas Warna material: kuning Bledpfoy Akh Rox Am Isg Tipe balok: HN 100|20 Profil kotak: 100 x 50 mm Pengait: 3 HK (kait) Jarak bebas: 3.600 mm 02x Pin pengaman, bekas Eksekusi: sepenuhnya galvanis Untuk mengamankan balok melintang dari pengangkatan yang tidak disengaja Kontak person di perusahaan kami: Tuan: Andre Evering Tuan: Mario Klöver Tuan: Falk Deutsch Informasi umum tentang barang: Barang ini hanya ditawarkan untuk pengambilan sendiri. Pengiriman atau transportasi lebih lanjut dari barang ini akan dikenakan biaya tambahan, yang dapat ditanyakan secara terpisah tergantung lokasi atau volume pengiriman.

Kondisi: baru, PL-HU-0001 Bjdpfxoyzi Hvo Am Ielg

Kondisi: baru, pl-hu-01 Bjdpfx Aeyzixlem Islg

Kondisi: baru, For sale: high-quality stainless steel compensator (expansion joint/hose – Ringwellschlauch) from the renowned BOA brand, intended for industrial applications. The component is designed for: - compensation of thermal expansion - vibration and noise damping - stress reduction in piping systems Manufactured from stainless steel 1.4404 (INOX), it is perfectly suited for demanding operating conditions (water, gas, industrial, and process installations). ⚙️ Technical Data - Manufacturer: BOA - Nominal diameter: DN125 - Length: 1500 mm - Pressure rating: PN16 - Material: stainless steel 1.4404 (INOX) - Type: expansion hose / steel compensator - Connections: flanged - Construction: corrugated hose with wire braid - Standards: ISO 10380 / DIN 📏 Dimensions - Internal diameter (approx.): 125 mm - Total length (approx.): 1500 mm ✅ Advantages ✔ renowned BOA manufacturer ✔ very high corrosion resistance ✔ long service life ✔ vibration and stress damping ✔ flexible design ✔ quick installation (flanges) Bedpfxsyzirxs Am Islg 📦 Set includes 1x DN125 compensator (as shown in the photos)

Kondisi: bekas, We are offering used order picking trolleys for sale. TECHNICAL DATA Height: 1,800 mm Width: 1,270 mm Depth: 470 mm Number of shelves: 3 units + clothes rail 2 push handles 4 swivel castors with guide roller with side step Assembled Condition: used PRICE €140.00 net €166.60 gross incl. VAT Available quantity: 439 units Bulk pricing (price per unit) 1 - 5 units: €130.00 net 6 - 10 units: €123.50 net 11 - 25 units: €117.00 net 26 - 50 units: €110.50 net 50 - 100 units: €104.00 net from 101 units: €97.50 net YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible for an additional charge. The extra costs depend on the delivery location and the volume of the shipment and can be requested individually. PROJECT PLANNING Our sales team will be pleased to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed in case of an order. The price is quoted per unit/net price or as specified in the product description (plus VAT). Of course, you will receive an invoice with VAT shown separately. Bedpfxjy Eqnmj Am Islg ABOUT US DLK, based in Nordhorn, deals in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, feel free to contact us. Four to win – The success modules of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Kondisi: baru, Tahun pembuatan: 2016, Fungsionalitas: belum diuji, berat keseluruhan: 64 kg, tegangan masuk: 690 V, jenis arus masuk: AC (pendingin udara), frekuensi input: 60 Hz, Merek: WEG Blsdpfsyzmvusx Am Ieg Model: EUCFW110080T Tahun pembuatan: Belum pernah digunakan Kapasitas (kW): 55 Tegangan: 500 - 690 Frekuensi (Hz): 50 - 60 Arus (A): 80 Berat (kg): sekitar 64 Stok tersedia: 1 Dibuat di: Brasil Komentar: Inverter frekuensi belum pernah digunakan

Kondisi: baik (bekas), panjang total: 1.000 mm, lebar total: 600 mm, tinggi total: 2.500 mm, kapasitas muatan per bagian penyimpanan: 150 kg, TECHNICAL DATA Bljdpfxeuk E Thj Am Ijg • Manufacturer: META • Frame height: 2,500 mm • Base width: 1,000 mm • Frame depth: 600 mm • Shelf load capacity: 150 kg • Number of shelves per bay: 6 pieces • Finish: galvanized • Boltless assembly • Condition: used Large quantities available immediately. Tiered net prices per unit plus VAT: Starter bay: 1 - 5 bays: €92.30 6 - 20 bays: €88.61 21 - 50 bays: €84.92 from 51 bays: €81.22 Add-on bays: 1 - 10 bays: €63.55 11 - 25 bays: €61.01 26 - 75 bays: €58.47 from 76 bays: €55.92 Available ex stock Nordhorn. YOUR CONTACT PARTNERS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is possible at an additional charge. The extra costs depend on the place of delivery and the volume of the shipment and can be requested from us individually. TERMS OF PAYMENT Payment terms are to be agreed upon in the event of an order. The price quoted is the unit/net price or as indicated in the description text (plus VAT). Of course, you will receive an invoice with VAT shown. ABOUT US DLK in Nordhorn deals in new and used products for warehouse logistics, conveyor technology, mezzanines, textile storage as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. Four in one – The pillars of DLK’s success: Warehouse Technology | Levelmaker® | Logistics | Solutions

Kondisi: bekas, TECHNICAL DATA • Manufacturer: META • Frame height: 3,900 mm • Base width: 1,300 mm • Frame depth: 600 mm • Shelf load: 100 kg • Number of shelves per bay: 10 pcs • Surface: galvanized • Condition: used Large quantities available immediately. Tiered net prices per unit plus VAT: Starter bays: • 1 - 5 bays: €136.90 net per unit • 6 - 20 bays: €132.94 net per unit • 21 - 50 bays: €128.98 net per unit • from 51 bays: €125.02 net per unit Extension bays: • 1 - 5 bays: €94.00 net per unit • 6 - 20 bays: €89.30 net per unit • 21 - 50 bays: €84.60 net per unit • from 51 bays: €79.90 net per unit Available ex stock Nordhorn. YOUR CONTACT PERSONS: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY Bedpfx Aouba Rbem Islg We are happy to assist you with transportation and assembly of the goods. This item is available for collection. Delivery or shipping is available at an additional cost. Extra charges depend on the delivery location and shipment size and can be quoted individually upon request. PAYMENT TERMS Payment terms will be agreed upon in the event of an order. All prices are unit prices/net prices as stated in the description (plus VAT). You will of course receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, specializes in new and used products for warehouse logistics, conveyor systems, mezzanine floors, textile warehouses as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins—the keys to success at DLK: Storage Technology | Levelmaker® | Logistics | Solutions

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Bledpsmhhypsfx Am Ijg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) Blsdpemhh Dhjfx Am Isg - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, usable depth 1,000 mm - 12 cantilever arms, usable depth 1,000 mm, standard - Including horizontal and diagonal braces for 1,300 mm bay distance - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions possible at any time) - (*Offer available in larger quantity: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm bay distance Bljdpfx Ajmhh Dzjm Iog - Rack length = 4,000 mm - Including fasteners (without floor anchors) - With assembly instructions and C4 load capacity labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance notification prior to delivery. The material is sensibly packed to facilitate easy unloading. If installed outdoors, the load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, and suitable for anchor fixing, and must support the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither required nor recommended. According to professional association guidelines, the top storage level should have at least a 500 mm overhang above the top of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever rack: bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Includes horizontal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension always possible) - (*Offer available in larger quantities: approx. 40 uprights in stock) Blsdpomhhx Isfx Am Isg Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Fastening material included (floor anchors not included) - Includes assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notification before delivery. The material is carefully packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchors, and able to accommodate the acting loads. The customer is responsible for checking and ensuring the floor quality, load-bearing capacity, and for obtaining any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional association recommendations, the rack uprights should have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg Blodpfx Ajmhhyajm Ieg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (floor anchors not included) - With assembly instructions and load labels C4 according to DIN standard - Technical telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freighting with pre-delivery notification. Materials are packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchoring, and able to absorb the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the subfloor as well as any permits required by authorities. Rack uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized Bedpfoh Ek Dasx Am Iolg - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) Bedpjmhh Ansfx Am Ijlg - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) Bljdpemhhf Sefx Am Ieg - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Screw system in hot-dip galvanized version: Ex-works price: Robust steel construction made of IPE sections Rack height: 3,500 mm Bjdjmhhl Hepfx Am Islg Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms adjustable in height in 100 mm increments Each upright with 3 bolted cantilever arms, usable depth 1,200 mm as standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Includes fixing material (without floor anchors) With assembly instructions and load capacity labels C4 in accordance with DIN standard

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking, painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 rack uprights, height 4,200 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms, each with 1,200 mm usable depth - Longitudinal and diagonal braces for 1,300 mm upright spacing (4,000 mm rack length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts and extensions available for reorder at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 730 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - Supplied with assembly instructions and load capacity badges C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipments with advance notice prior to delivery. The material is packed sensibly to enable easy unloading. Delivery can take place approx. 1 - 2 weeks after receipt of order. Bledpfemidyfox Am Iog When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowelling, and be able to withstand the imposed loads. Soil composition, bearing capacity, and any required official approvals must be checked and ensured by the customer. Rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to the professional association’s recommendations, the top storage level should extend at least 500 mm above the top edge of the uprights.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: Bodpfx Asmkixwsm Iolg - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal bracing for a rack length of 4,000 mm (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm Bedemhh Dtepfx Am Ielg - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight with prior notification before delivery. The material is sensibly packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The surface must be level concrete, suitable for dowelling, and able to bear the acting loads. Floor condition and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the ground by the customer; wall anchoring is not required and not recommended. According to trade association recommendations, the uprights should extend at least 500 mm above the highest storage level.

Kondisi: sangat baik (bekas), Dijual pelat pemasangan/meja mesin yang kokoh dengan alur T. Terbuat dari konstruksi baja berdinding tebal, dicat biru. Basis ideal untuk pemasangan komponen besar, perlengkapan, atau untuk aplikasi pengukuran dan pemesinan. • Dimensi: 2570 x 770 x 200 mm • Permukaan dengan alur T • Bagian atas dikerjakan secara presisi Blsdpjw Rdtujfx Am Iog • Berat: 900 kg • Dapat diangkut atau dimuat dengan forklift

Kondisi: bekas, panjang total: 1.220 mm, lebar total: 400 mm, tinggi total: 2.000 mm, kapasitas muatan per bagian penyimpanan: 150 kg, We offer used shelving racks here. TECHNICAL DATA Blsdpfxsy Dggls Am Iog Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new) Shelf dimensions: 1,220 x 400 mm (used) Load capacity per shelf: 150 kg Number of levels: 5 units Boltless assembly Diagonal braces Tiered net prices per piece, plus VAT: Starter bays: 1 - 5 bays: €69.50 net each 6 - 20 bays: €66.03 net each 21 - 50 bays: €62.55 net each From 51 bays: €59.08 net each Add-on bays: 1 - 5 bays: €47.50 net each 6 - 20 bays: €45.13 net each 21 - 50 bays: €42.75 net each From 51 bays: €40.38 net each PROJECT PLANNING Our sales team will be pleased to prepare a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to support you with transport and installation of the equipment. TERMS OF PAYMENT Payment terms are to be agreed upon when an order is placed. The price stated is per unit/net price, or as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry, and crafts sectors. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please don’t hesitate to contact us. Four-fold success – The four pillars of DLK: Storage Technology | Levelmaker® | Logistics | Solutions

Kondisi: hampir baru (bekas), panjang total: 1.220 mm, lebar total: 400 mm, tinggi total: 2.200 mm, kapasitas muatan per bagian penyimpanan: 150 kg, We are offering here used shelving racks. TECHNICAL DATA Manufacturer: Nedocn Bodpjy Dgf Ijfx Am Ielg Type: Shelf N Frame height: 2,000 mm (new) Shelf: 1,220 x 400 mm (used) Shelf load capacity: 150 kg Number of levels: 6 units Boltless assembly Diagonal bracing Graduated prices net per unit plus VAT. Starter bays: 1 - 5 bays: €79.20 net per unit 6 - 20 bays: €75.24 net per unit 21 - 50 bays: €71.28 net per unit from 51 bays: €67.32 net per unit Add-on bays: 1 - 5 bays: €55.00 net per unit 6 - 20 bays: €52.25 net per unit 21 - 50 bays: €49.50 net per unit from 51 bays: €46.75 net per unit PLANNING Our sales team will be happy to prepare a non-binding, customised quote according to your requirements. TRANSPORT & INSTALLATION We are pleased to assist you with the transportation and installation of the equipment. TERMS OF PAYMENT Payment terms will be agreed upon in the event of an order. The price stated is per unit/net price or as specified in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US The company DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses, as well as machinery for trade, industry, and craft businesses. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Connect Four – The Four Pillars of Success at DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Kondisi: baru, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Bledpfsh Dv Uqjx Am Ijg Technical data for pallet racking beam: Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Box profile: 110 x 50 mm Connector: G.E. - 3 Clear span: 2,700 mm Weight / pc.: approx. 15.026 kg Max. load per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against accidental lifting General information about the item: This item is offered for collection only. Any desired transportation or shipping of this item will incur additional costs, which can be quoted separately depending on delivery location and scope. Our services at a glance: (Prices on request) Assembly and installation Our general installation terms apply Racking inspection Inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our in-house fleet (without unloading)