Beli Winter Laser Ukiran Co2 bekas (5.133)

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Working area X/Y: 1200mm/1600mm. Z-axis travel: 250mm. Maximum table load: 80kg/m². Rapid traverse: 500mm/s. Machine dimensions X/Y/Z: approx. 2500mm/2000mm/1700mm. The machine is partially defective. An on-site inspection is possible. Blodpfx Aswty Easbvsn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, jam operasional: 11.556 h, Fungsionalitas: berfungsi sepenuhnya, jenis pendinginan: air, daya laser: 500 W, panjang gelombang laser: 1.064 nm, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Unit Pengelasan Laser – AL 500 CWS Daya rata-rata 500 W Sakelar darurat pada resonator Catu daya laser CWS Daya puncak pulsa 17 kW Frekuensi pulsa 0-100 Hz Termasuk flens pengarah 3 x 400 V, 50-60 Hz, 3 x 32 A Sistem pergerakan ALFlak Rentang pergerakan (X, Y, Z) 340 × 330 × 370 mm Peralatan: Ergokeil 5°-25° Baji ergonomis untuk mikroskop Optik miring-putar AL500 LED-UW HP Lensa fokus f=120, lampu cincin dioda ultra putih Pelindung kaca dengan sambungan putar ALFlak Sumbu X, Y, dan Z dapat dikunci secara terpisah Lensa mata 16x pembesaran Modul sumbu putar ALFlak dengan chuck ø 125 mm / diameter dalam ø 24 mm Dapat dimiringkan untuk pergerakan putar dari horizontal hingga vertikal. Blodpfsz Eu Sysx Abvsn

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, jam operasional: 1.288 h, daya laser: 300 W, jarak pergerakan sumbu X: 700 mm, jarak gerak sumbu Z: 650 mm, jumlah sumbu: 3, Laser 3-sumbu SEI Laser INFINITY 5070 V300 ini dibuat pada tahun 2022. Mesin ini memiliki area kerja 500 x 700 mm dan lintasan sumbu Z sepanjang 650 mm. Mesin ini dirancang untuk material dengan berat maksimum 40 kg/m². Jika Anda mencari performa pemotongan laser berkualitas tinggi, pertimbangkan mesin pemotong laser CO₂ SEI Laser INFINITY 5070 V300 yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. • Area kerja: 500 x 700 mm • Meja penyangga material: 550 x 750 mm • Berat material maksimum: 40 kg/m² • Jam operasi DSP: 6744 jam • Jam operasi: 4579 jam Blsdpszdi I Nefx Abvsn • Jam produksi: 1288 jam

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2005, jenis pendinginan: air, berat keseluruhan: 15.000 kg, panjang total: 10.000 mm, lebar total: 4.000 mm, tinggi total: 25.000 mm, tahun perombakan terakhir: 2024, Perlengkapan: Penandaan CE, dokumentasi / manual, henti darurat, penghadang cahaya keselamatan, sistem pelumasan terpusat, unit pendingin, ITEC Ag, mesin pemotong laser untuk papan sirkuit. Mesin ini terdiri dari komponen-komponen berikut: Blsdpjzyzzyefx Abven Sel ITEC AG dengan alas granit, 3 sumbu Robot Motoman NX 100, manipulator vakum Unit pendingin RIEDEL L 21/8 TR 3.00 Mesin pelurus GSW Schwabe AG, MHR 2,5 mm / 1250 mm / 7 rol Unit penggulungan GSW Schwabe AG, VRMA 80/76 Papan sirkuit dipindahkan dari gulungan (GSW Schwabe AG, MHR 2,5/1250, diperbaiki total pada tahun 2022) ke mesin pelurus (GSW Schwabe AG, VRMA 80/76). File PDF yang berisi data teknis terlampir. Portal laser untuk TRUMPF TF dipasang di atas alas granit yang kokoh, yang menjamin akurasi pengulangan yang mutlak. Robot Motoman melakukan pengoperasian menggunakan manipulator vakum dan kamera. Mesin ini telah dirawat secara berkala dan dalam kondisi siap untuk produksi. Sebelum pembongkaran, mesin dibersihkan, semua cairan dan cairan pendingin telah dikeluarkan.

Kondisi: baru, Tahun pembuatan: 2024, Workpiece size 200 x 200 x 200 mm Travel path - x axis: 110 mm Travel path - y axis: 110 mm Laser engraving machine 20 W Anseat Enclosed system with sufficient interior space to engrave workpieces of up to 200 x 200 x 200 mm. Technical specifications: Laser power (fiber laser): 20 W Wavelength: 1064 nm Laser source: Raycus Blsdpfswgn D Dox Abvon Supported graphic formats: PLT, BMP, JPG, PNG, TIP, PCX, TGA, ICO, DXF Pulse frequency: 20 – 100 kHz Power consumption: < 800 W Cooling: Air cooled Voltage: Single-phase, 230 V +/- 10% Engraving area: 110 x 110 mm Minimum line width: 50 μm Smallest character size: 0.3 mm Focusing aid via 2 LED pointers

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 80 kW (108,77 hp), jumlah sumbu: 2, berat keseluruhan: 172 kg, panjang meja: 900 mm, lebar meja: 600 mm, Perlengkapan: dokumentasi / manual, A medium-sized CNC laser machine designed for continuous operation in small, medium, and large-scale production. This model features a lift table, providing you with additional production versatility. The Wattsan laser cutter will be an indispensable asset for your business—efficient and fast. The Wattsan 6090 LT can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, and more. The lift table function allows the working area to be lowered by up to 160 mm, enabling installation of a rotary device to diversify your production. Additionally, it includes a waste collection tray, making your tasks significantly easier. Contact our consultants for further details! Features of the Wattsan 6090 LT: - Working area: 600 x 900 mm - Laser power: 90–100 W - Table lowering depth: 160 mm - Positioning accuracy: 0.03 mm - Machine dimensions: 1030 x 1490 x 670 mm (+ 315 mm if on wheels) - Package dimensions: 1110 x 1580 x 755 mm - Weight: 230 kg Virmer not only provides premium machines, but also full service and delivery. Our engineers and consultants are ready to answer all your questions and, if necessary, provide video support. Wattsan machine owners also benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We provide not only laser engravers, but also metal cutters, welding machines, markers, and cleaning systems. Wattsan is a Chinese manufacturer with nearly 15 years of experience in laser machinery, continuously evolving with the help of customer feedback. Thanks to ongoing improvements, Wattsan has implemented over 50 modernizations, making their machines more reliable, precise, and powerful—empowering you to take your business to the next level. WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for a laser or CNC milling machine, we’re happy to assist. Blsdpfx Aoiim Unobvjn Discover our wide range of machinery and accessories: - CO2 laser machines - Metal laser cutters - Fiber metal lasers - Fiber laser engraving machines - CNC milling machines for metal - Wood milling machines - CNC routers - Laser engravers - Laser plywood cutters - Metal laser cutters - Laser markers - Lenses - Chillers - Machine cooling systems - S&A coolers - IPG laser, MAX Photonics, Raycus - Compressors - Rotary devices - Laser machine mirrors

Tahun pembuatan: 2022, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, resolusi (maks.): 1.000 DPI (titik per inci), daya laser: 80 W, kecepatan operasi: 3.200 mm/dtk, panjang meja: 600 mm, lebar meja: 1.000 mm, nomor mesin/kendaraan: JL2022059, machine-spec-001 Bsdpfsx E Snwex Abvjln

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, jam operasional: 1 h, Fungsionalitas: berfungsi sepenuhnya, panjang poros: 1.070 mm, tegangan masuk: 230 V, jenis arus masuk: AC (pendingin udara), daya laser: 30 W, jenis pendinginan: udara, panjang gelombang laser: 1.070 nm, Perlengkapan: kabin, Mesin Pengukir Laser dengan Daya Laser 30 Watt - Mesin pameran / perangkat demo bekas dengan perkiraan penggunaan sekitar 1 jam. - Layak untuk dilihat. - Termasuk PC Windows 11 64 bit (termasuk monitor/keyboard/mouse) - Sudah terpasang dan dikalibrasi - Perangkat lunak pengukir dalam bahasa Jerman - Sangat mudah digunakan - Nyalakan dan mulai bekerja - Sumber laser serat dengan daya 30 Watt untuk menghasilkan tanda yang kontras dan cepat dengan resolusi yang sangat tinggi (lihat gambar) - Fungsi getaran, misalnya untuk membersihkan komponen logam - Pengukiran dalam hingga 3 mm - Untuk mengukir pada berbagai logam (baja tahan karat, kuningan, aluminium, dll.) dan banyak jenis plastik - Kualitas industri yang berat - Sistem lengkap / siap digunakan - Area kerja sekitar 390 x 270 x 350 mm (p x l x t) - Permukaan penjepit dengan ulir pengikat dengan jarak 50 mm - Lampu LED untuk area kerja - Sambungan pipa 50 mm untuk penyedotan asap - Area pengukiran hingga 170 x 170 mm - Pengaturan fokus secara otomatis - Termasuk sakelar kaki untuk memulai proses pengukiran Bljdpfod Ha I Sjx Abvsn Harap perhatikan juga penawaran sewa/beli yang menarik dari kami. Penjualan hanya dilakukan kepada pelaku bisnis. Pengiriman / konsultasi / penjualan hanya di Jerman / Austria / Swiss. Dimensi mesin sekitar: Lebar: 450 mm Tinggi: 800 mm Kedalaman: 750 mm Berat: sekitar 80 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 20190824, diameter spindel: 125 mm, lebar total: 1.600 mm, tinggi total: 1.680 mm, panjang total: 3.040 mm, berat keseluruhan: 2.700 kg, kecepatan spindel (maks.): 6.800 rpm, tinggi benda kerja (maks.): 100 mm, jenis arus masuk: tiga fasa, lebar benda kerja (maks.): 180 mm, tegangan masuk: 380 V, panjang meja: 2.000 mm, jumlah spindel: 4, daya: 28,75 kW (39,09 hp), frekuensi input: 50 Hz, Deskripsi: - Konstruksi kokoh dengan rangka besi cor dan logam yang dilas - Meja kerja dilapisi krom sepenuhnya untuk memastikan pergerakan material yang lancar - Roda pengarah samping untuk material dengan penggerak pneumatik - Transmisi kardana profesional untuk sistem pengumpanan - Kecepatan pengumpanan hingga 33 m/menit, dapat diatur secara mekanis dengan variator mekanis - dengan katrol elastis - Pompa pelumasan sentral manual - Penyesuaian radial dan aksial sumbu kerja dengan tampilan mekanis untuk - posisi yang tepat - Penyesuaian ketebalan kerja secara elektrik Bledpoz E H H Nsfx Abvjn - Panel kontrol yang diposisikan secara ergonomis sesuai standar UE - Jam operasional: 200 jam - Data teknis: - Beban listrik terhubung: 21 kW - Tegangan operasi: 400V, 50Hz, 3 fase - Tekanan udara yang dibutuhkan: minimal 6 bar - Dimensi: 3040x1600x1680 mm - Berat: 2800 kg - Panjang meja pengumpanan: 2000 mm - Kecepatan pengumpanan yang dapat diatur secara bertahap: 8-33 m/menit - Diameter sumbu: 40 mm - Sumbu 1 - bawah: Ø125mm (pemotong saluran Ø152mm), 4kW - Sumbu 2 - kanan: Ø115-170mm, 4kW - Sumbu 3 - kiri: Ø115-170mm, 4kW - Sumbu 4 - atas: Ø105-150mm, 5,5kW - Kecepatan putaran sumbu: 6800 rpm - Daya mesin penggerak: 3kW - Dimensi penggerak rol: Ø140x35x50 mm - Dimensi keseluruhan: 4x120mm Data teknis material: - Lebar material: 20-180mm - Ketebalan material: 8-100mm

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: BN120XT-HA-X, Dirancang, diproduksi, dan diuji di Jerman. JEWELliner "CUT" 120W, Seri Model "PremiumPlus" Memotong & mengukir dengan waktu pemrosesan yang sangat singkat. Model, daya laser, dan opsi lainnya tersedia berdasarkan permintaan. Laser ukir – laser penanda – laser pelabel dengan pelindung "Kelas Laser 1". Laser pelabel kami, JEWELliner "CUT", sangat cocok untuk MEMOTONG logam mulia dan logam ringan hingga ketebalan material 2,5 mm. Material yang lebih tebal juga dimungkinkan, silakan tanyakan kepada kami. Pelabelan atau pengukiran semua logam, plastik pilihan, dan keramik tentu saja tetap dimungkinkan, seperti pada model JEWELliner kami yang lain. Ukuran casing sangat ringkas, sehingga JEWELliner "CUT" dapat dengan mudah diintegrasikan ke dalam proses produksi. Contoh material untuk dipotong: Emas, perak, kuningan, karbon, aluminium Contoh material untuk diukir/dilabel: Baja, baja tahan karat, emas, perak, titanium, aluminium, kuningan, tembaga, perunggu, karbon, keramik, Makrolon Kemungkinan aplikasi: - Ukiran grafis (logo, gambar, sketsa tangan) - Ukiran foto - Kode batang (kode garis, Datamatrix, QR-Code) - Pelabelan nomor seri - Ukiran bagian dalam cincin (misalnya, nama, tanggal, simbol, tulisan tangan) – opsional - Ukiran bagian luar cincin (misalnya, nama, grafik tanpa akhir, pola tanpa akhir) – opsional - Gelang lengan di bagian dalam dan/atau luar – opsional - Ukiran teks (teks lurus, teks melingkar, lengkungan teks, simbol teks) - Ukiran tulisan tangan - Ukiran sidik jari - Mikroukiran (mikroteks hingga ukuran huruf minimum 0,15 mm) - Ukiran melingkar (pelabelan pada permukaan bulat atau melengkung) – opsional Desain yang ringkas, semua komponen terpasang di dalam casing dan didinginkan dengan baik oleh aliran udara! Mesin ini tidak memerlukan perawatan! Perlengkapan standar JEWELliner "CUT" (BN120XT-HA-X): - Unit laser serat dengan kepala pengarah dan modul pemfokus - Casing pelindung Kelas Laser 1 dengan jendela pelindung mata 280x200 mm - Pintu pembuka otomatis elektrik - Sakelar darurat - Area pandang 180° pada permukaan pelabelan di dalam casing - Sumbu Z dapat digerakkan secara elektrik dan otomatis - Termasuk perangkat lunak pelabelan (dapat dikonfigurasi) Spesifikasi / Data Teknis: Jenis laser: Laser serat Daya keluaran CW: 120W Rentang frekuensi yang tersedia: 2,1 - 6.300kHz MOPA Jenis koneksi: USB 2.0 Panjang gelombang: 1064nm Lensa (opsional): F-Theta 163 Ukuran area pelabelan: 110 x 110 mm - juga dapat lebih kecil atau lebih besar Blodpfxof Ul Uie Abvsn Rentang fokus: sekitar 2 mm Tinggi huruf minimum: 0,3 mm Lebar garis minimum: 0,023 mm Pendinginan: didinginkan dengan udara Perawatan: tidak memerlukan perawatan Catu daya: AC 110V/240V - 50/60Hz tahan terhadap korsleting Dimensi: P850 x L660 x T680 mm Berat: sekitar 80 kg Setelah pengiriman, laser pelabel ini siap digunakan dan dapat segera diintegrasikan ke dalam proses produksi pelanggan. Kami juga dengan senang hati membuat contoh ukiran untuk Anda. Gambar dan ilustrasi dapat bervariasi!

Kondisi: bekas, Tahun pembuatan: 2005, Beschriftungsfeld 120 x 120 mm Tischgröße 250 x 250 mm Werkstückgewicht max 50 kg Steuerung Fobagraf Maschinengewicht ca. 1000 kg Maschinengestell aus geschweißter Stahlkonstruktion Kreuzschlitten, Ausführung Hartgestein, Tischplatte mit Anschlageisen aus Stahl höhenverstellbarer Laserkopf Gütegeschalteter ND: YAG Laserkopf, lamengepumpt, 100 W Ablenkeinheit am Laserkop montiert (mit Standardobjektiv) Z-Achse mit Getriebe und Servoantrieb Servo-Achssteuerung mit X-. Y- und Z-Achse Wassergekühlt Bjdsylcqhspfx Abvoln Steuerung: Anwendersoftwarepaket Fobagraf Betriebssystem Windows 2000 Einschaltstunden: 17.388 h Betriebsanleitung vorhanden

Kondisi: baru, Tahun pembuatan: 2026, Area kerja yang tersedia (mm): 500×300, 950×600, 1300×900, 1600×1200, 1600×2000 Daya resonator laser: 75W-160W Bsdjn Nvydjpfx Abvsln

Kondisi: baru, Tahun pembuatan: 2025, If you are looking for a real machine and not a toy, you've come to the right place: Fiber Laser Engraver Large Format X1130 x Y665 x Z260 mm Laser Marker skyLaser Mark – 2D, optionally 3D – Fiber Laser Engraving/Marking Laser is the complete solution for your complex laser engraving applications. Please note: Compare the installed components in the laser systems on offer: Scanlab (R) scanner, IPG Photonics (R) laser, Parker Axes (R), Schneider Electric (R) motors, Scanlab (R) controller, German software and cabling – all components exclusively from German production! The laser systems are manufactured 100% to customer specifications at our facility in Plauen. Competitors frequently use Chinese components (starting with the controller: EZCAD = Chinese origin!!) (* Prices vary according to configuration. This is a brand-new laser machine manufactured by us.) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology reaches its limits. Using a fiber laser with a wavelength of 1064nm, even the most intricate structures can be realized in almost any material. Unlike conventional milling methods, the laser operates contact-free, force-free, and without any tool wear. Advantages for your application include geometric flexibility and high processing precision. This type of machining is applicable regardless of the hardness of the workpiece. The customizable and mobile worktable increases the system's flexibility. Easily integrate the system into your production line or use it as a stand-alone solution. Our skyLaser Mark delivers highly precise and permanent markings (laser engravings) and is particularly suitable for metals and certain organic materials. A wide variety of fonts can be used, and marking barcodes, serial numbers, logos, and images is effortless. Thanks to excellent resolution, nearly all marking requirements can be fulfilled. Production of embossing stamps, engravings, labels, and complex fine structures is straightforward; the software is extremely user-friendly. Even complex and challenging marking tasks can be easily created on the included industrial PC. Precise positioning is accomplished in no time, thanks to the optional process monitoring camera and software-assisted workpiece alignment. The system has virtually no wear parts and, owing to IPG laser technology, is almost maintenance-free, making it particularly suitable for industrial and continuous operation. skyLaser Marking Laser / Engraving Laser at a glance: - Working area: from 110 x 110 mm or 120 x 120 mm, or Fiber Laser Engraver Large Format with integrated axes X1130 x Y665 x Z260 mm - Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) Blodpfx Abjf U Spxjvon - SCANLAB SCANcube galvanometer scanner - Nominal laser power: 20W New: Software-controlled, adjustable working height (Z axis max. 260mm depending on configuration) Optional: other working areas, automatic material feeder, etc.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, OEM – Marking Laser / Engraving Laser (with CO2 Laser Source) The integrated system features a 30-watt CO2 laser source with a wavelength of 10,060 nm. The marking area is approximately 140 x 140 mm; optional expansions up to 300 x 300 mm are available. No external cooling is required. Power supply: 110...240 VAC / 50 Hz. Applications include laser engraving and material removal. The control software, EzCad, is installed on the provided laptop. The software language is selectable (German, English). Optionally, the laser marker can be equipped with a manually adjustable Z-axis. The laser is prepared for integration into a superior system but can also be used as a stand-alone solution. For machine integration, interfaces for interlock, emergency stop, external laser control, etc. are available. We are happy to provide customer support based on individual requirements and consultation. Bodpepyg N Ajfx Abvoln

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, Usable working area: 2000x3000mm, Z-axis: 50mm, repeatability over the entire area: ±0.05mm, X/Y/Z addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed on the XY-axis: 2000mm/s. Drives: X/Y system with linear motors, Z-axis with servomotor. Laser protection class: Class 1 with protective cover. Machine base: robust welded steel frame structure. Axis system: X/Y/Z movement axes. Drive: linear motor drive, contactless and low-wear. Unloading system: 2000mm extension. Conveyor: aluminum slats driven by servomotor. Pressure roller: for material handling. Laser source: 300W CO2 laser, enclosed and maintenance-free. Cooling: closed cooling circuit with water chiller for laser. Cutting head: 5-inch lens, cutting nozzle, cutting gas supply. Extraction: extraction tray for small parts and dust. Software: ICARO CAM control software. Motorized brush width: 2000mm. SEI PC console: without computer; to be provided by the customer. Extraction unit: 2x extraction fans at 5.5kW each. Scanner: manual barcode scanner. Unwinding device: for material rolls with unwind shaft. Unwinding system: interface available. The system has only been set up and commissioned, no series production has taken place. On-site inspection possible, documentation available. Bedpfswbuzfox Abvjln

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jenis laser: laser serat, produsen sumber laser: IPG, model sumber laser: YLS-2000-CUT, daya laser: 2.000 W, tegangan masuk: 400 V, arus masuk: 15 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, jenis pendinginan: air, Perlengkapan: unit pendingin, Kami menawarkan IPG Laser YLS-2000-CUT bekas ini Nama model: YLS-2000-CUT Nomor seri: 16126751 Tegangan nominal: 400-460 V AC 3P/PE Frekuensi: 50/60 Hz Arus nominal pada beban penuh: 15,2 A Sekering: 20/120 A/kA Nomor gambar: G25-16-130212-7 Tanggal pembuatan: Desember 2016 Bljdpfszhcvnex Abvon dengan chiller air yang sesuai: IPG chiller Model: LC 71,01-A.4.5/6 Tanggal pembuatan: 2018 Jika Anda memiliki pertanyaan atau ingin informasi lebih lanjut, silakan kirimkan pesan kepada kami atau hubungi kami.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 80 kW (108,77 hp), jumlah sumbu: 2, berat keseluruhan: 172 kg, panjang meja: 900 mm, lebar meja: 600 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, A medium-sized CNC laser machine designed for continuous operation in small, medium, and large-scale production. It features a pass-through table, enabling you to cut materials and fabric rolls of any length. A Wattsan laser cutter is an indispensable asset for your business—efficient and fast. The Wattsan 6090 ST can cut up to 10-13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, and more. This model includes a removable front panel, allowing you to utilize the extra space for cutting sheets and rolls. It is also equipped with a waste collection bin, which significantly enhances the convenience of operation. Contact our managers for more information! Wattsan 6090 ST Features: - Working area: 600x900 mm - Laser power: 90-100 W Bjdpfxoh R Iy Rs Abvoln - Working table lowering depth: 40 mm - Positioning accuracy: 0.03 mm - Machine size: 1030 x 1490 x 670 mm (plus 315 mm when on casters) - Packing dimensions: 1110 x 1580 x 755 mm - Weight: 230 kg Virmer not only provides premium machinery but also offers comprehensive service and delivery options. Our engineers and managers are ready to answer any of your questions and can provide video support if required. In addition, owners of Wattsan equipment receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. We supply not only laser engraving machines but also metal cutters, welding units, marking machines, and cleaning equipment. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years, continuously evolving with the help of its customers. Thanks to extensive customer feedback, Wattsan has implemented over 50 upgrades, resulting in machinery that is more reliable, precise, and powerful—allowing you to take your business to the next level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are searching for the right laser or CNC milling machine, we are happy to assist you. At our company you will find a wide selection of laser machines and equipment: CO2 laser machines; laser cutting machines for metal; laser metal cutters; fiber laser metal cutters; fiber laser engraving machines; CNC milling machines for metal; milling machines for wood; CNC routers; laser engraving machines; laser engravers; laser cutting machines for plywood; laser engravers; laser cutting machines for metal; CNC routers; laser markers; lenses; coolers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; compressors; rotary attachments; laser machine mirrors.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 100 kW (135,96 hp), jumlah sumbu: 2, berat keseluruhan: 252 kg, panjang meja: 1.600 mm, lebar meja: 1.000 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, This CNC laser cutting machine features a working area of 1600x1000 mm and is designed for use in large-scale factories operating 24/7. Additionally, this laser engraver and cutter is equipped with an illuminated work table and a robust conveyor system that can accommodate workpieces weighing up to 80 kg. The Wattsan 1610 LT will elevate your production to the next level. The Wattsan 1610 LT offers a table lowering depth of 160 mm. This model is suitable for processing wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, and more. It is also equipped with a waste collection bin, making operation much more convenient. For further information, feel free to contact our managers! Bljdpoh Ucwcjfx Abvsn Wattsan 1610 LT Specifications: - Working area: 1600x1000 mm - Laser power: 100–130 W - Table lowering depth: 160 mm - Positioning accuracy: 0.03 mm - Machine dimensions: 1505 x 2200 x 670 mm; with wheels: 315 mm - Packaging dimensions: 2300 x 1600 x 810 mm - Weight: 532 kg Virmer not only provides first-class machines but also service and delivery. Our engineers and managers are ready to answer all your questions and, if necessary, provide video support. Furthermore, Wattsan machine owners benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. We are the official supplier for Wattsan. In addition to laser engravers, we also supply metal cutters, welding machines, laser markers, and cleaning equipment. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years and continuously evolves thanks to feedback from its customers. With over 50 upgrades, Wattsan’s machines have become more reliable, precise, and efficient—helping you take your business to the next level. YOU CAN CALL OR WRITE TO US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are looking for a suitable laser or CNC milling machine, we are at your service. We offer a wide range of laser machines and equipment, including: CO2 laser machines, metal laser cutters, laser metal cutters, fiber metal lasers, fiber laser engravers, CNC milling machines for metal and wood, CNC routers, laser engraving machines, laser engravers, laser cutters for plywood, metal laser cutters, CNC routers, laser markers, lenses, chillers, machine cooling systems, S&A chillers, IPG laser sources, MAX Photonics, Raycus, compressors, rotary attachments, and mirrors for laser machines.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 100 kW (135,96 hp), jumlah sumbu: 2, berat keseluruhan: 277 kg, panjang meja: 1.600 mm, lebar meja: 1.000 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, This is a highly productive dual-head CNC laser machine—no magic involved, just two laser heads. In addition, this laser engraving and cutting system features an illuminated worktable and a robust support chain that can accommodate workpieces weighing up to 80 kg. Both laser heads operate simultaneously with a minimum distance of 130 mm between them. Each is equipped with its own 100–120 W laser tube, enabling fast processing. The Wattsan 1610 is suitable for wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, and more. Features of the Wattsan 1610 Duos LT: - Working area: 1600 x 1000 mm - Laser power: 100–130 W - Table lowering depth: 160 mm - Positioning accuracy: 0.03 mm - Machine dimensions: 1600 x 2200 x 670 mm (additional 315 mm with casters) - Packaging dimensions: 2300 x 1750 x 810 mm - Weight: 457 kg Blodpfxsh Ucxde Abvjn Virmer not only offers premium machinery but also comprehensive service and delivery. Our engineers and account managers are available to answer your questions and provide video support if needed. Additionally, owners of Wattsan equipment enjoy lifetime online support. Virmer is headquartered in the Netherlands and operates throughout Europe. We are the official supplier of Wattsan, providing not just laser engravers, but also metal cutters, welders, marking machines, and cleaning equipment. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years, continuously evolving thanks to customer feedback. As a result, Wattsan has implemented over 50 upgrades, enhancing the machines’ reliability, precision, and performance—helping you take your business to the next level. CONTACT US BY EMAIL OR PHONE! WE WILL HELP YOU SELECT THE RIGHT MACHINE FOR YOUR APPLICATION. If you are searching for the right laser or CNC milling machine, we are happy to assist you. We offer a wide selection of laser machines and accessories: - CO2 laser cutters - Laser metal cutting machines - Fiber laser metal cutters - Fiber laser engraving machines - CNC milling machines for metal and wood - CNC routers - Laser engravers - Plywood laser cutters - Laser metal cutters - Laser markers - Optical lenses - Chillers and cooling systems (S&A chillers) - IPG Laser, MAX Photonics, Raycus - Compressors - Rotary devices - Laser machine mirrors

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 100 kW (135,96 hp), jumlah sumbu: 2, berat keseluruhan: 219 kg, panjang meja: 1.200 mm, lebar meja: 900 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, 1290 is a professional laser cutter designed for high-volume, industrial production. It features a continuous feed table that allows you to cut materials and fabric rolls of any length. The Wattsan CNC laser machine is engineered for 24/7 operating capacity in series manufacturing environments. The Wattsan 1290 ST can cut materials up to 10-13 mm thick and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, and more. This model has a distinctive feature: the front panel is removable, making it possible to use the open space for cutting large sheets and material rolls. Additionally, the integrated waste collection bin significantly improves the convenience and cleanliness of operation. Contact our managers for further details! Wattsan 1290 ST Specifications: Bodpfx Aboh Ucrbovjln - Working area: 1200 x 900 mm - Laser power: 100-130 W - Working table lowering depth: 40 mm - Positioning accuracy: 0.03 mm - Machine dimensions: 1410 x 1790 x 670 mm (+ 315 mm if on wheels) - Packaging dimensions: 1880 x 1490 x 810 mm - Weight: 368 kg Virmer not only offers top-tier machines, but also provides full service and delivery. Our engineers and managers are available to answer all your questions and provide video support if needed. Additionally, all Wattsan equipment owners receive lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. Virmer is the official supplier of Wattsan. In addition to laser engravers, we also supply metal cutters, welding machines, markers, and cleaning systems. Wattsan is a Chinese manufacturer that has been producing laser equipment for nearly 15 years, continually improving and evolving its machines with customer feedback. Thanks to this input, Wattsan has made over 50 major upgrades, increasing the reliability, precision, and performance of their machines, so you can take your business to the next level. CONTACT US VIA PHONE OR EMAIL! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION If you are looking for the right laser or CNC milling machine, we are here to assist you. We offer a wide selection of laser machines and accessories, including: CO2 laser machine; metal laser cutting machine; laser metal cutter; fiber metal laser; fiber metal laser engraving machine; CNC milling machine for metal; woodworking milling machine; CNC milling machine; laser engraving machine; laser engraver; plywood laser cutter; laser cutter for metal; CNC milling machine; laser markers; lenses; coolers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus; air compressors; rotary attachments; laser machine mirrors.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, OEM – Marking Laser (Laser Safety Class 4) The beam source is a 20-watt fiber laser with a wavelength of 1064 nm. The marking area is 120 mm x 120 mm; optionally, areas up to 300 x 300 mm are possible. No external cooling is required. Power supply: 230 VAC / 50 Hz. Applications include laser engraving and material ablation. The control software, Weldmark 3, is installed on an associated PC with Windows 10 Professional as the operating system. The laser head can be moved manually. Optionally, software-controlled linear axes and a rotary axis can be integrated. The control software language is selectable (German, English, French). Bljdpfx Aon Atmvjbvon The laser is prepared for integration into a superior system but can also be used as a stand-alone unit. For integration purposes, interfaces for interlock, emergency stop, external laser control, etc., are provided. We are happy to support the customer according to arrangements and specific requirements.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 1.770 mm, lebar total: 600 mm, panjang total: 617 mm, tegangan masuk: 230 V, jenis pendinginan: udara, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Berkat sistem kartrid konstruksi tertutup, printer 3D ini sangat cocok untuk pembuatan prototipe, bidang kedokteran gigi, atau bahkan untuk tujuan pelatihan, karena tidak ada kontak dengan bubuk logam – baik dalam persiapan komponen maupun selama proses pencetakan itu sendiri. AL3D-METAL 200-100 Printer 3D Logam untuk manufaktur aditif TIPE LASER: Laser serat Panjang gelombang: 1070 nm Daya rata-rata: 200 W Mode operasi: CW Diameter fokus: 50 μm Kecepatan pemindaian: maks. 5 m/s Parameter proses: Kemampuan untuk secara komprehensif memengaruhi parameter proses TERMASUK 9 SET Kartrid Konstruksi: Volume konstruksi: r Ø 100 mm; z 60 mm Ketebalan lapisan: 10 - 50 μm Kepadatan komponen yang dapat dicapai: > 99% PERANGKAT LUNAK AL3D-OS Bjdpfxszlnh Ro Abvjln Pengoperasian: melalui layar sentuh 15,6", keyboard, dan mouse Konektivitas: 1x Ethernet; 2x USB Format file impor CAD: STL Persiapan pencetakan: Pembuatan penyangga sederhana. Slicer terintegrasi dalam perangkat lunak.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 13100019, jenis arus masuk: tiga fasa, berat keseluruhan: 1.000 kg, Dijual gergaji potong presisi (pengoptimal) profesional dari perusahaan Jerman terkemuka, Winter Holztechnik, model Optimax 100. Mesin ini dalam kondisi berfungsi penuh, dirawat secara berkala, dan siap digunakan. Sangat ideal untuk memotong cacat dengan cepat dan presisi serta menyiapkan komponen dengan panjang yang tetap di bengkel pertukangan. Fitur dan keunggulan utama: Kontrol PLC: Panel sentuh intuitif yang memudahkan pemrograman. Multifungsi: Kemampuan untuk melakukan pemotongan berurutan (memori hingga 10 dimensi) dan memotong garis yang ditandai dengan kapur berpendar. Efisiensi: Mesin ini dapat menggantikan pekerjaan beberapa orang, menawarkan kecepatan hingga 80 siklus per menit. Presisi: Akurasi pemotongan sangat tinggi, yaitu +/- 1 mm. Bedpfxszzw Ulj Abvoln Spesifikasi teknis: Daya motor gergaji: 7,5 kW. Daya motor pengumpan: 2,0 kW (pengumpan dapat diatur secara terus-menerus hingga 80 m/menit). Tinggi pemotongan: maks. 100 mm. Diameter mata gergaji: Ø 455 mm (lubang 30 mm). Panjang material minimum: 300 mm. Catu daya/Udara: 400V / 8 bar.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 60 kW (81,58 hp), jumlah sumbu: 2, berat keseluruhan: 68 kg, panjang meja: 500 mm, lebar meja: 300 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, Laser engraving machine for home and hobby use. This desktop unit is also capable of cutting wood, paper, cardboard, acrylic, and fabric. The Wattsan CO2 laser engraver is primarily designed for carving small workpieces. Compact, reliable, and precise—exactly what you need. The Wattsan 0503 micro-engraver processes plywood, wood, plastics, rubber, leather, textiles, and more. It can cut materials up to 5–6 mm thick. It is frequently used for manufacturing souvenirs, stamps, and other decorative items. For further information, feel free to contact our advisors! Wattsan 0503 Specifications Working area: 500 x 300 mm Laser power: 60 W Table lowering depth: 200 mm Positioning accuracy: 0.03 mm Machine dimensions: 650 x 1040 x 575 mm Packing dimensions: 765 x 1140 x 710 mm Weight: 104 kg Virmer not only supplies high-quality machines but also offers service and delivery. Our engineers and consultants are ready to answer all your questions and, if necessary, provide video support. Additionally, Wattsan device owners benefit from lifetime online support. Virmer is based in the Netherlands and operates throughout Europe. As the official supplier for Wattsan, we deliver not only laser engravers but also metal cutters, welding machines, marking machines, and cleaning units. Wattsan is a Chinese manufacturer that has been producing laser equipment for almost 15 years and continuously develops its machines with the help of customer feedback. Owing to this feedback, Wattsan has carried out over 50 upgrades, making the machines more reliable, precise, and powerful, enabling you to bring your business to the next level. YOU CAN CONTACT US BY EMAIL OR PHONE! WE WILL SELECT THE RIGHT MACHINE FOR YOUR REQUIREMENTS. Blsdpfx Aeh D Rvpjbvon If you are looking for the right laser or CNC milling machine, we are happy to assist. You will find a wide selection of laser machines and equipment with us: CO2 laser machines; metal laser cutting machines; fiber metal laser cutters; fiber laser engravers; CNC milling machines for metal; wood milling machines; CNC routers; laser engraving machines; laser engravers; plywood laser cutters; metal laser cutters; CNC routers; laser markers; lenses; chillers; machine cooling systems; S&A chillers; IPG Laser, MAX Photonics, Raycus sources; compressors; rotary attachments; mirrors for laser machines.

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 10.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: NRGL614.01025, jenis arus masuk: AC (pendingin udara), lebar total: 3.340 mm, tegangan masuk: 400 V, arus masuk: 19 A, SEI NRGL 1612 V300 – Mesin Pemotong Laser CO₂ Industri 300 W dengan Sistem Pemuatan Material Otomatis – Siap Digunakan Sistem pemotongan laser industri SEI NRGL 1612 V300 untuk dijual. Diproduksi pada tahun 2021 dan dilengkapi dengan sumber laser CO₂ 300 W dan sistem pemuatan material. Mesin ini berfungsi penuh dan siap untuk diperiksa. Kira-kira 10.000 jam penggunaan. Fitur Utama: • SEI NRGL 1612 V300 • Tahun: 2021 • Laser CO₂ 300 W • Area kerja: 1600 × 1200 mm • Dilengkapi dengan sistem pemuatan material otomatis • Kira-kira 10.000 jam penggunaan • Siap digunakan dan tersedia untuk pengujian • Berlokasi di Munich, Jerman Cocok untuk pemrosesan industri bahan-bahan seperti akrilik, tekstil, kain teknis, kayu, kertas, karton, dan bahan non-logam lainnya. Harga: €40.000 (dapat dinegosiasikan) Foto tambahan, video, dokumentasi teknis, dan jadwal inspeksi tersedia berdasarkan permintaan. Bljdpszcny Ajfx Abvjn Biaya transportasi tidak termasuk, dapat didiskusikan, ditentukan, dan disepakati.