Beli Bts-Mf300Lh Ballenpresse Waste Baler bekas (3.917)

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2026, laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: Nedpfey S Ru Ajx Aa Uelb The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2015, jam operasional: 30.143 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 570 kg, berat keseluruhan: 20.000 kg, kapasitas tangki oli: 600 l, tahun perombakan terakhir: 2026, laju aliran volumetrik: 800 m³/jam, en-1 Nodpfjy S Rtlex Aa Ujlb

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 170 t, lebar bukaan pengisian: 1.020 mm, panjang bukaan pengisian: 1.800 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 900 kg, berat keseluruhan: 40.000 kg, kapasitas tangki oli: 3.000 l, tahun perombakan terakhir: 2025, laju aliran volumetrik: 750 m³/jam, For sale is a used bale press system consisting of a chain belt conveyor designed for below-floor operation, equipped with a feed hopper, a hydraulic pre-compressor with agitating device, a MACPRESSE 111A baler, two complete wire feed frames each with five wire reel stands (without wire). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific pressure: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Binding: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/hour, material dependent Hydraulic oil tank volume: 3,000 L Transport dimensions (baler with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and tested upon completion, see our functional video for reference. The system was previously used for baling paper and cardboard from municipal collections. After the contract period ended, the press line became available for sale. Details of overhaul work and replaced spare parts can be found in the detailed photo documentation and our offer. Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection by appointment is possible. We assume no liability for technical details or possible errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain Belt Conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Feeder belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Height of drive axle above ground: 5,777 mm Side wall height feeder: 500 mm Side wall height incline: 880 mm Steel carrier height: 40 mm Carrier spacing: 1,200 mm Transport dimensions (dismantled): 15,005 x 2,503 x 2,435 mm (L x W x H) Nlodpfx Aoy S Rqwja Uob Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor (year 2017) was custom-built and installed to match the press during the last installation in the Netherlands. The conveyor is in good working condition and was not overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 chain belt conveyor by Wagensveld B.V. 1 feed hopper with pre-compression flaps 1 agitating device 1 MACPRESSE baler, type 111A 2 wire feed frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic diagrams

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6065042, Tahun pembuatan: 2008, jam operasional: 3.785 h, kapasitas angkut: 1.600 kg, tinggi angkat: 7.100 mm, pengangkatan bebas: 2.230 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 2.990 mm, kapasitas baterai: 560 Ah, tegangan baterai: 48 V, panjang garpu: 1.150 mm, kondisi ban: 100 persen, Tipe ban depan: ban poliuretan (tidak meninggalkan bekas), tipe ban belakang: ban poliuretan (tidak meninggalkan bekas), berat kosong: 3.518 kg, Perlengkapan: geser samping, bt-rrb2-2008-data Nlsdpfsy Uwc Esx Aa Uob

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, berat bal: 600 kg, Perlengkapan: dokumentasi / manual, dixi-80-sld-horizontalpresse Nledpfey Udwpjx Aa Ujb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, berat bal: 550 kg, Used vertical baler HSM V-Press 1160 Plus from 2015. The machine has been regularly serviced by an authorized service center. The press is fully operational and in very good technical and visual condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Machine width x depth x height: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Material to be pressed: film, mixed paper, cardboard, cutting machine waste Freight costs depend on weight, volume, and above all on the distance. Relevant information for inquiries includes: delivery address (postal code and town); further details will require a phone conversation, so we kindly ask you to contact us by phone for information regarding transport costs and additional delivery conditions. Our contact details can be found under the legal information of the seller. Cash payment upon collection on site is possible. We sell and export worldwide. Thanks to our extensive storage capacity, we can deliver larger quantities flexibly and quickly. Please contact us before purchasing. Nljdpfxjy Udqij Aa Ujb We issue intra-community invoices – excluding VAT. Opening hours: Mon-Fri: 8:00-16:00 Sat: closed

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Merek: HSM Tipe: V-Press 1160 plus Tahun pembuatan: 2013 Tekanan press: 532 kN Tegangan: 400 V Berat bal maksimum: hingga 550 kg (tergantung material) Ukuran bal: 120 x 110 x 120 cm Berat mesin: 2403 kg Dimensi mesin: 180 x 157 x 298,5 cm Ukuran lubang pengisian: 119,5 cm × 65 cm Kondisi: sangat baik! Nlsdpfoy Uimvsx Aa Ujb Video mesin beroperasi tersedia atas permintaan.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Set kantong sampah plastik untuk alat penghisap debu, 20 buah Ukuran kantong: 800x1200 mm Dirancang untuk penghisap debu CORMAK: FM300 Nodpfey T E Umex Aa Uelb FM300S FM300SA FM500

Kondisi: baik (bekas), Tahun pembuatan: 2003, jam operasional: 4.899 h, kapasitas angkut: 2.500 kg, tinggi angkat: 3.700 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, tinggi konstruksi: 2.480 mm, jarak tempuh: 4.899 km, Forklift listrik duplex Merek: BT Tahun pembuatan: 2003 Kapasitas: 2.500 kg; Tinggi angkat: 3.700 mm; Tinggi lintas: 2.480 mm, dilengkapi dengan SIDESHIFT; 4.899 jam penggunaan; baterai tahun 2009; dilengkapi dengan pengisi daya eksternal. Buat janji untuk test drive. Nlodpfeymbakex Aa Ueb

Kondisi: baik (bekas), Tahun pembuatan: 1999, kapasitas angkut: 1.600 kg, tinggi angkat: 2.900 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, tinggi konstruksi: 2.000 mm, berat kosong: 1.300 kg, Diperoleh melalui tukar tambah Stacker listrik Merek: BT Tahun: 1999 Nledpfxeyc Eyge Aa Usb PALLET BLOK: lebar luar garpu 68cm Kapasitas: 1.600 kg Ketinggian angkat: 2.900 mm Tinggi lintasan: 2.000 mm Baterai: GEL bebas perawatan dengan pengisi daya Lihat videonya di YouTube

Kondisi: baik (bekas), jam operasional: 2.200 h, kapasitas angkut: 1.200 kg, tinggi angkat: 1.800 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, tinggi konstruksi: 2.100 mm, jarak tempuh: 2.200 km, Stacker JALUR LEBAR merek ini tahun 2006 dan dalam kondisi baik; Kapasitas 1.200 kg; Mengangkat hingga ketinggian 1.800 mm; Tinggi bebas lewat 2.100 mm; Hanya 2.200 jam penggunaan; Dilengkapi garpu stainless steel! Lebar luar garpu 88cm, lebar dalam 69cm; Baterai gel bebas perawatan, dilengkapi pengisi daya eksternal. Lihat videonya di YouTube. Nsdpfjw Nk Szsx Aa Uslb

Kondisi: baik (bekas), Tahun pembuatan: 2015, jam operasional: 3.126 h, kapasitas angkut: 2.000 kg, jenis bahan bakar: listrik, jarak tempuh: 3.126 km, This BT brand electric pallet truck is from 2015 and is in good condition. It has a load capacity of 2,000 kg and is equipped with 2,000 mm forks. The hour meter reads 3,126 hours. The battery, from 2013, comes with an external charger. Video to follow. Nljdpovclpwefx Aa Ueb

Kondisi: baik (bekas), Tahun pembuatan: 2006, Used grinding machine from Kraku (DE) Nodjwc Nl Uepfx Aa Uelb Type: BTS 150 Belt width: 150 mm Drum grinder with a diameter of 300 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, jam operasional: 30.408 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.250 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 550 kg, berat keseluruhan: 16.000 kg, kapasitas tangki oli: 600 l, daya: 22 kW (29,91 hp), tahun perombakan terakhir: 2025, laju aliran volumetrik: 530 m³/jam, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 pieces (as of April) Main press force: 50 t Specific pressure: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, variable length Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 l PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the Baler: The machine has been partly overhauled in our workshop and general maintenance work has been carried out. Upon completion of the refurbishment, the baler was tested during operation and is now ready for immediate sale. The following refurbishment work has been carried out: General work: - Machine cleaned, derusted, primed, partially repainted Nsdpsy R Npiofx Aa Uslb - Wire feed marks in the feed channel welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, refilled with new oil - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Program menu language set to English - Two key switches in the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Electrical system of the agitator replaced, connected, and tested Press ram: - All four rollers on the press ram removed and replaced - Main hydraulic cylinder disassembled, overhauled, cylinder tube honed, all seals replaced, leak test conducted - All plastic wear blocks on the press ram replaced Pre-press flap: - Both bearings on the shaft of the pre-press replaced - Both hydraulic cylinders disassembled, overhauled, both cylinder tubes honed, all seal kits replaced, leak test conducted - Scraper flap on the pre-press replaced Tying system: - Two complete needles with wire redirect rollers replaced - Needles adjusted and set - All wire redirect rollers in the needle heads replaced - Twister finger replaced - Two twister shafts replaced - All 8 wear plates on the twister, under the twister fingers, replaced Scope of delivery: Only the baler is being sold. All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is fully available. Inspection possible by appointment. We do not accept liability for the technical information and possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 13.209 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.250 mm, panjang bukaan pengisian: 1.050 mm, lebar bal: 100 mm, tinggi bal: 700 mm, berat bal: 500 kg, berat keseluruhan: 8.500 kg, kapasitas tangki oli: 400 l, daya: 15 kW (20,39 hp), tahun perombakan terakhir: 2026, laju aliran volumetrik: 108 m³/jam, Technical Data – Baler: Manufacturer (as per nameplate): BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Model: HC 50 (corresponds to Presto HPK 50) Year of manufacture: 2007 Operating hours: 13,209 hours (as of March 2026) Number of bales produced: 23,379 pieces Pressing force: 50 t Specific pressing force: 650 kN/m² Fill chute dimensions: 1250 x 1050 mm (L x W) Filling volume: 0.96 m³ Theoretical cycle time: 32 seconds Theoretical throughput: 108 m³/hour Bale dimensions: 1100 x 700 mm (W x H), length variable Drive power: 15 kW Total current consumption: 50 A Tying: 4-fold vertical, fully automatic Throughput rates with bulk density of: - 30 kg/m³: approx. 3.1 t/hour - 60 kg/m³: approx. 4.5 t/hour - 100 kg/m³: approx. 7.2 t/hour Bale weights at a bale length of approx. 1.2 m: up to 500 kg, depending on material Hydraulic oil tank capacity: 400 l PLC control: Siemens S7-200 Effective transport dimensions (press only): 6850 x 1950 x 2650 mm (L x W x H) Transport weight (press): 8.5 t Condition of the baler: The baler was used in an operational production environment exclusively for compacting cardboard, and has been serviced regularly. With only 13,209 operating hours, the machine has relatively low hours. The baler has been partially overhauled and thoroughly tested in our workshop. The following overhaul work has been completed: - Machine cleaned - Bale retaining claws freed up and lubricated - Photoelectric sensor replaced - Twister unit fully dismantled, disassembled, all bearings replaced, all plastic guides replaced, lubricated, chain tension adjusted - Knives and counter-knives dismantled, sharpened, and reinstalled Nedpsy R Npcefx Aa Uslb - Knife gap readjusted - General maintenance work carried out and lubricated Scope of delivery: - 1 x baler with wire spool boxes (without wire) (6850 x 1950 x 2650 mm) - 1 x bale chute (5100 x 1150 x 450 mm) - 1 x wire reel box for floor-mounting (1450 x 380 x 360 mm) For transport of the baler, a tautliner with an effective internal height of 2700 mm is required. Remarks: A complete set of documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, jam operasional: 22.029 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.400 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 16.000 kg, daya: 75 kW (101,97 hp), tahun perombakan terakhir: 2025, laju aliran volumetrik: 300 m³/jam, en_001 Nsdpfx Asy R Nnfea Uslb

Kondisi: bekas, Tahun pembuatan: 2013, jam operasi: 3120 jam, dengan garpu pemuat Nljdpfey Rvm Ijx Aa Ueb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, Perlengkapan: dokumentasi / manual, b950a1bb-de28-44b2-afe9-bca823ad7d63 Nlsdpey Tt Risfx Aa Uob

Kondisi: baik (bekas), Tahun pembuatan: 2008, jam operasional: 2.500 h, kapasitas angkut: 1.200 kg, tinggi angkat: 1.400 mm, jenis bahan bakar: listrik, tipe tiang: dupleks, tinggi konstruksi: 2.100 mm, jarak tempuh: 2.500 km, Stacker REL BJURAN dari merek ini berasal dari tahun 2008 dan dalam kondisi baik; Kapasitas 1.200 kg; Mengangkat hingga ketinggian 1.400 mm. Tinggi bebas 2.100 mm. Hanya 2.500 jam operasi; Dilengkapi dengan garpu stainless steel! Lebar luar garpu 88 cm, dalam 69 cm; Baterai gel bebas perawatan dan dilengkapi dengan pengisi daya eksternal. Lihat videonya di YouTube. Nedpsy R Aqtsfx Aa Uslb

Kondisi: bekas, jam operasional: 429 h, warna: abu-abu, panjang total: 3.250 mm, lebar total: 1.250 mm, tinggi total: 1.900 mm, AGRI-20240620-002 Nedpoym Uzbofx Aa Ujlb

Kondisi: bekas, Tahun pembuatan: 2005, lebar total: 1.300 mm, tinggi total: 3.850 mm, panjang total: 2.200 mm, de-001 Nsdpfxeym Uxte Aa Uslb

Kondisi: bekas, Tahun pembuatan: 2005, lebar total: 1.300 mm, tinggi total: 3.850 mm, panjang total: 2.200 mm, 1 Nljdpfsyrtcusx Aa Uob

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, berat bal: 550 kg, Used vertical baler HSM V-Press 1160 Plus from 2015. The machine has been regularly serviced by an authorized service center. The press is fully operational and in very good technical and visual condition. Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Machine width x depth x height: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Material to be pressed: film, mixed paper, cardboard, cutting machine waste Freight costs depend on weight, volume, and above all on the distance. Relevant information for inquiries includes: delivery address (postal code and town); further details will require a phone conversation, so we kindly ask you to contact us by phone for information regarding transport costs and additional delivery conditions. Our contact details can be found under the legal information of the seller. Cash payment upon collection on site is possible. We sell and export worldwide. Thanks to our extensive storage capacity, we can deliver larger quantities flexibly and quickly. Nodpey Sxagsfx Aa Uelb Please contact us before purchasing. We issue intra-community invoices – excluding VAT. Opening hours: Mon-Fri: 8:00-16:00 Sat: closed

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 1987, nomor mesin/kendaraan: 90071000, berat keseluruhan: 15.000 kg, de-01 Njdpfx Aaey Tlzaj Uolb

Kondisi: bekas, Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, lebar total: 700 mm, panjang total: 2.600 mm, tinggi total: 2.300 mm, Kami menawarkan mesin press sampah bekas Orwak Compactor 5070 3 chamber, tahun pembuatan 2012. Njdpfoy Sxd Esx Aa Uelb Tipe: Compactor 5070 Nomor produk: 4905070-00 Nomor seri: 108362 Tanggal produksi: 2012-10 Berat: 522 kg Tegangan: 230 V Frekuensi: 50 Hz Daya: 1,1 kW Arus: 10 A Rentang suhu (oli standar): +5 hingga +40 °C Rentang suhu (oli khusus): -10 hingga +40 °C Cocok untuk memampatkan limbah besar seperti plastik, kardus, dan kertas. 100% berfungsi, demonstrasi operasional tersedia. Mesin buatan Swedia yang ideal untuk menjaga keteraturan dalam pengelolaan limbah. Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.