Beli Alfred Kullak Drahtablaufhaspel bekas (96)

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Underground tank, fire water tank, storage container made of steel with a 30,000-liter capacity for the storage of non-potable water / fire-fighting water. Dimensions: D = 2.00 m - L = approx. 10.00 m The tank is equipped with a manhole DN 600 with a dome cover. It is used, has been emptied and professionally cleaned on the inside, and coated on the outside with a bitumen layer / bitumen insulation. The tank features a permanently welded dome shaft made of steel sheet, including a walkable cover. Shaft dimensions: approx. 900 x 900 x 1,000 mm (width x depth x height) Minor insulation damage from removal and transport may be present on the tank. Price ex Söhrewald – loaded free onto truck – For use as a fire-water tank, we can equip the tank completely with a firefighting suction connection, consisting of: - 1 piece of suction line DN125, stainless steel (V2A), with Storz A fixed coupling and Storz A blank cap - 1 piece of vent pipe DN100 with hood, stainless steel (V2A), - 1 piece of anti-vortex plate mounted on suction line, - 1 piece of sign “Fire water extraction point”, - 1 piece of dip tube with dip stick for fill level measurement, - 1 piece of dome cover with bolts and gasket. The suction line can be used both as a filling and extraction pipe. All components are preassembled ready for installation – ex works – If required / requested: Installation of a fire water suction connection, above ground, in accordance with DIN 14244 - type B, incl. A fixed coupling according to DIN 14319 and A cover cap according to DIN 14319. Housing made of cast iron – exterior with epoxy coating. General information: Dkedoi Ary Sepfx Ac Top You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Other tank systems (new and used) as well as rental units are also available!

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: eco-55, Fuel dispenser with data acquisition eco-55 Type eco 55 – not for legal-for-trade applications, Delivery rate up to approx. 55 l/min., suitable for diesel fuel, incl. - Fuelling terminal with connection to myTecalemit Cloud - Incl. web-based fuel management software – basic module – - 2 identification systems (driver/vehicle) for up to 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230 Volt - Oval gear meter with pulse generator, accuracy approx. +/- 0.5% - Angle seat filter / dirt filter with fine mesh screen - 4 m hose DN 19 with type-approved automatic fuel nozzle, including swivel joint and hose holder - Nominal suction head up to approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated sheet steel housing Dimensions: approx. 1,410 x 520 x 275 mm - Graphic display, backlit - Fuel data memory for up to 10,000 dispensing records - Menu navigation in German, English, and French Magnetic keys / transponders are additionally required. Alternatively, this dispenser is also available with a flow rate of 75 liters/min. Delivery of the dispenser can be arranged for an additional charge. General: You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Further fuel systems (new and used) as well as rental units are also available! Djdpfxjd Tc I Dj Ac Tskp In addition, we purchase existing fuel systems and, with certified specialist company qualification according to the Water Resources Act (§ 62 WHG), can professionally empty, clean, dismantle and remove them.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: et100-neu-löwa, 100,000 Litre Fire Water Retention Tank – Underground Tank – Retention Reservoir According to DIN-EN 12285-1, Tank Class A, suitable for media up to 1.1 kg/dm³, single-walled, untreated interior, professionally insulated exterior. Tank suitable for installation in pedestrian-accessible areas (not suitable for vehicle traffic). Dimensions: Diameter = 2.90 m – Length = approx. 15.80 m The tank is equipped with a DN 600 manhole with dome cover, bolts, and seal. Tank delivered ex works, loaded free of charge. On request, the tank can be fully equipped with a fire water suction connection, making it compliant with DIN 14230 – Underground Fire Water Tanks: Fire water suction connection / suction line in stainless steel V2A – according to DIN 14230 – consisting of: - 1 pc. DN125 suction pipe in stainless steel V2A, with Storz A fixed coupling and Storz A blank cap, - 1 pc. DN100 vent pipe with hood in stainless steel V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Fire Water Extraction Point", - 1 pc. dip tube with measuring rod for level measurement, - 1 pc. dome cover with bolts and seal. The suction line can be used both for filling and water extraction. Components are prepared ready for installation – ex works – If required: Installation of an above-ground fire water suction connection, according to DIN 14244 – Type B, including A fixed coupling as per DIN 14319 and A cover cap according to DIN 14319. Housing made of cast iron – exterior epoxy-coated. If requested: Complete internal sandblasting of the tank and coating suitable for process/fire water. The tank is suitable for use as a water tank, fire water tank, fire water reservoir, fire water retention tank, rainwater attenuation tank, retention reservoir, retention tank, rainwater storage, rainwater retention tank, cistern, etc. General: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Djdpfx Acjd Tc Nus Tokp Further tank systems (new and used) and rental tanks are also on offer! In addition, we also purchase existing tank systems and, as a certified specialist company according to the German Water Resources Act (§ 62 WHG), can professionally empty, clean, dismantle, and remove them.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: et50-neu-HEL, 50,000 l capacity, compliant with EN 12285-1, double-walled, suitable for installation in walk-in areas. The exterior is equipped with high-quality PUR-ENDOPRENE insulation according to DIN 6607. PUR-ENDOPRENE is a two-component, solvent-free polyurethane insulation with excellent insulating properties. Dimensions: Diameter = 2.50 m – Length = approx. 10.80 m – Weight approx. 9.3 t. Includes a walk-in manhole shaft, multi-part, according to DIN 6626, height adjustable from approx. 850 mm to 1,050 mm, as well as a walkable cover, galvanized and rainwater-tight. Dsdpfscydx Ujx Ac Tjkp Tank supplied ex works, free loaded. Additional charge for a vehicle-accessible manhole shaft according to DIN 6626 with 10 t or 40 t cover. General: You will receive an invoice with indicated VAT. The sale is made based on our general terms and conditions. Further tank systems (new and used) as well as rental units are also available! In addition, we purchase existing tank systems and can drain, clean, dismantle, and transport them in compliance with the Water Resources Act (§ 62 WHG) with certified specialist qualifications.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: ogs30-GA-130-40-MZ, kapasitas tangki: 30.000 l, 1 x 30,000 Liter Storage Tank – used 1 x Dispenser Type GA-130/40-MZ – brand new Tank Description: According to DIN 6616/D, above-ground, double-walled, including test certificate. The tank is supported by two saddle feet, is used, cleaned, and fully refurbished. Equipped with the following fittings: • 1 filling pipe with TW cap (filler cap) and dip tube, • 1 gauging pipe with dipstick and dipstick closure, • 1 vent pipe with vent cap, • 1 brand new overfill prevention device with type approval (AIII), • 1 ladder and 1 spare socket for extraction purposes, • 1 optical leak detector with type approval and leak detection fluid. Externally, the tank is newly primed and painted in an RAL color shade. Length = approx. 10.00 m + approx. 0.70 m console / Diameter = 2.00 m / Weight approx. 6.0 tons. Dodpecybvzsfx Ac Tskp The tank is equipped with a factory-welded end-mounted console on which a brand new dispenser is installed. The dispenser is fully connected to the tank – including angle check valve and shut-off valve – and is supplied with an approx. 3 m hose and an automatic dispensing nozzle. Dispenser Description: – Brand new – With two dispensing hoses for filling trucks and cars, not calibratable for trade use, suitable for diesel fuel, switchable, dispensing possible from one side only at a time. Delivery rate 1 = up to approx. 130 l/min Delivery rate 2 = up to approx. 40 l/min Approved for above-ground and underground tank installations, including approx. 2 x 4.0 m hose and automatic nozzles ZVA + ZVA 25, as well as a fine filter with washable permanent element. The dispenser is equipped with a 400 V motor with pump and gas separator, including a 3-digit mechanical register for individual dispense quantity display, and a 6-digit totalizer – ex works. Available upon request: 1 hose mast incl. stainless steel spring The system is delivered ready for operation, with the exception of the electrical connection for the dispenser. – Ex works, loaded free of charge – General Information: You will receive an invoice with VAT shown separately. Purchase is subject to our general terms and conditions. Other tank systems, storage tanks, heating oil tanks (new and used), as well as rental units are also available! Additionally, we purchase existing tank systems and, as a certified specialist company according to the German Water Resources Act (WHG), can empty, clean, dismantle, and transport them professionally.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: AHL-50, kapasitas tangki: 50.000 l, 50,000 litre capacity, above-ground, made from steel sheet. The tank complies with DIN 6616, is equipped with two saddle supports, an access ladder, and has been professionally emptied and cleaned inside. Dimensions: L = approx. 10.70 m - D = 2.50 m The tank will be supplied with a brand-new plastic inner lining, including leak monitoring device installed in a protective box (see sample photo). The plastic inner lining has a "General Building Authority Approval" and is thus suitable and approved for the storage of liquid fertiliser AHL and NOx reduction agent AUS 32 (AdBlue). Dedpfx Aceb Hpd Rj Tjkp The exterior of the tank will be completely sanded, newly primed, and repainted in an RAL colour of your choice. Price is ex works – ready for loading. (Delivery can be offered at an additional, cost-effective price.) Delivery time by arrangement. Important: The tank shown in the sample photo is a refurbished 50,000-litre tank that has already been delivered to a customer. The plastic pipework (PVC connections) shown is not included in the scope of delivery but can be supplied at extra cost. You will receive an invoice with separately shown VAT. Purchase is subject to our general terms and conditions.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: og30, kapasitas tangki: 30.000 l, Heating oil tank, diesel tank, steel tank, tank installation, storage container with a capacity of 30,000 liters According to DIN 6616/D, above-ground, double-walled, incl. test certificate. The tank features two saddle supports, a DN 600 manhole with dome cover, is pre-owned, internally drained and professionally cleaned, and will be equipped with the following fittings: - 1 fill pipe with TW cap (filling cap) and dip pipe, - 1 gauging pipe with dipstick and dipstick closure, - 1 vent pipe with vent hood, - 1 brand new overfill prevention device with type approval (AIII), - 1 ladder as well as 1 spare socket for extraction purposes, - 1 optical leak detector with type approval and leak detection fluid. The tank will be freshly primed and painted externally (RAL color tone). Length = approx. 10.00 m / Diameter = 2.00 m / Weight approx. 5.9 t / ex works, loaded free of charge. General: You will receive an invoice showing VAT. The sale is subject to our general terms and conditions. Other tank installations (new and used) as well as rental units are also available! Dkedpfxjb Hn Udo Ac Tep In addition, we purchase existing tank installations and, with certified specialist qualifications according to the Water Resources Act (§ 62 WHG), can professionally drain, clean, dismantle, and remove them.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, warna: biru, kapasitas tangki: 80.000 l, nomor mesin/kendaraan: AHL-80, 80,000 liter capacity, above-ground, steel sheet construction. The tank is compliant with DIN 6616, features two saddle supports, an access ladder, and has been professionally emptied and cleaned on the inside. Dimensions: Length = approx. 12.80 m - Diameter = 2.90 m The tank will be fitted with a brand-new internal plastic liner, including a leak detection device mounted in a protective box (see sample photo). The plastic liner has "General Building Authority Approval" and is therefore suitable and approved for the storage of liquid fertilizer (AHL) as well as NOx reduction agent AUS 32 (AdBlue). Externally, the tank will be completely sanded down, newly primed, and repainted in your desired RAL color shade. Price ex works – loaded free of charge. (A cost-effective delivery can be offered at additional charge.) Dsdpfx Aceb Avh Aj Tokp Delivery time = by arrangement. Important: The tank shown (sample photo) is a refurbished 80,000 liter tank that has already been delivered to a customer. The plastic pipework (PVC connection) shown is not included in the scope of supply and can be purchased at additional cost. You will receive an invoice with VAT shown separately. The sale is based on our general terms and conditions.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5.000 Liter-Tankstelle, kapasitas tangki: 5.000 l, Farm Fuel Station – Commercial Fuel Station – Double-Walled Tank System – comprising: - 5,000-liter tank according to DIN 6616/D, above-ground, double-walled – used - Fuel dispenser type eco-Box-55 – brand new Tank description: According to DIN 6616/D, above-ground, double-walled, including test certificate. The tank is equipped with two saddle feet, a DN 500 manhole with dome cover. The tank is used, internally drained, professionally cleaned and supplied with the following fittings: 1 fill pipe with TW closure (filling cap) and dip pipe, 1 dipstick tube with dipstick and closure, 1 vent pipe with vent hood, 1 brand-new overfill prevention device with type approval (AIII), 1 ladder plus 1 spare socket for extraction purposes, 1 optical leak detection unit with type approval and leak fluid. The tank is newly primed and painted on the outside. Dimensions: L = approx. 2.70 m + 0.70 m for console / D = 1.60 m / Weight approx. 1.7 t / ex works, loaded free of charge. Fuel dispenser description: Type eco-Box-55 – not legal-for-trade, Flow rate up to approx. 55 l/min, suitable for diesel fuel, incl.: - Tank management terminal with connection to myTecalemit-Cloud - including web-based tank data management software – basic module – - 2 ID systems (driver/vehicle) for up to 4,000 users - Identification via transponder technology - USB interface for data retrieval - Vane cell pump with single-phase asynchronous motor – 230 Volt - Oval gear meter with pulse output, accuracy = approx. +/- 0.5% - 4 m fueling hose DN 19 with type-approved automatic nozzle, including swivel joint and hose holder - Nominal suction height approx. 3.5 m / max. suction line length = 6.0 m - Robust powder-coated steel housing Dimensions: approx. 553 x 470 x 380 mm - Two-line illuminated monochrome display, character height 8 or 19 mm - Tank data storage for up to 10,000 dispensing records Dksdpfxjdccdqs Ac Tjp - Menu available in German, English, and French Magnetic keys/transponders are additionally required. Upon request, a dispenser with a nominal output of 75 l/min can also be installed. General: The price for the fuel station is ex works Söhrewald near Kassel, loaded free of charge. (Delivery can be offered at an additional, cost-effective charge.) Delivery time upon request (approx. 4 weeks) You will receive an invoice with separately shown VAT. Purchase is subject to our General Terms and Conditions. Other tank systems (new and used) as well as rental systems are also available! We also purchase existing tank systems and can professionally drain, clean, dismantle, and remove them with certified specialist qualifications according to the German Water Management Act (§ 62 WHG).

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: og10, 10,000 litre capacity – according to DIN 6616/D, above-ground, double-walled, including test certificate. The tank features two saddle feet, a DN 500 manhole with dome cover, is used, internally emptied and professionally cleaned, and is equipped with the following fittings: - 1 filling pipe with TW cap (filling cover) and dip tube - 1 gauge pipe with measuring rod and closure - 1 vent pipe with ventilation hood - 1 brand new overfill prevention device with type approval (AIII) - 1 ladder and 1 spare socket for extraction purposes - 1 optical leak detection unit with type approval and leak detection liquid Dkjdocyb Twepfx Ac Tsp The tank will be newly primed and painted externally. Dimensions: L = approx. 5.30 m / D = 1.60 m / weight approx. 2.2 t / ex works, loaded free of charge. General information: The tank is suitable for the storage of HVO (Hydrotreated Vegetable Oil). You will receive an invoice with VAT shown separately. Purchase is governed by our general terms and conditions. Further tank systems (new and used) as well as rental tanks are also available. In addition, we buy existing tank systems and, with our certified specialist qualifications in accordance with the German Water Resources Act (§ 62 WHG), can professionally empty, clean, dismantle, and remove them.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: og5, 5,000 liter capacity according to DIN 6616/D, above-ground, double-walled, including inspection certificate. The tank is equipped with two saddle feet, a DN 500 manhole with dome cover, is used, internally emptied and professionally cleaned, and comes with the following fittings: Dkjdpfx Acscyb E No Tjp - 1 fill pipe with TW cap (filling cap) and dip tube - 1 dipstick tube with measuring rod and closure - 1 vent pipe with vent hood - 1 brand new limit sensor with type approval (AIII) - 1 ladder as well as 1 spare socket for withdrawal purposes - 1 optical leak detector with type approval and leak detection fluid The tank is suitable for storing HVO (Hydrotreated Vegetable Oil). The exterior of the tank will be newly primed and painted. Dimensions: length approx. 2.80 m / diameter 1.60 m / weight approx. 1.3 t / ex works, loaded free of charge. We are happy to offer you an economical delivery solution. You will receive an invoice showing VAT. The sale is subject to our general terms and conditions.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2025, General overhaul 2025 Saw blade: 350 – 400 mm Motor power: 6.5 / 8.5 kW Speed: 1,500 / 3,000 rpm Cutting speed: 1,650 – 3,800 m/min Saw height control: electronic Working range, square (max.): 120 x 120 mm Working range, flat (max.): 200 x 100 mm Working range, flat (max.): 250 x 70 mm (oversize only) Working range, round (max.): 130 mm Saw feed rate: 0 – 40 mm/s, steplessly adjustable Cut-off length: 5 – 600 mm (9,999 mm with multiple stroke) Material feed rate, max.: 500 mm/s Weight: approx. 1,300 kg Dimensions (LxWxH): 1,800 mm x 1,300 mm x 1,950 mm The machine is completely overhauled at our facility and will subsequently be in excellent, like-new condition. The following parts/services, among others, are included: - Conversion to PLC control - Upgrade to Siemens HMI operator interface - Conversion to ball screw spindle with servo control - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum-quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure Additionally, the machine comes with: - Noise protection enclosure - Cutting expansion (for premium cut surfaces without return marks) Options: - Multiple clamping fixture for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long stock Dkedpfx Acexpqzhs Top - 7.5 kW motor - 12 kW motor - Delivery and installation at your premises - Training for your personnel

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Control System: Siemens S7 PLC Max. Saw Blade Diameter: 500 mm Motor Power: 4.0 kW Saw Blade Feed: Infinitely adjustable 0–40 mm/s Electronic Saw Height Adjustment Working Range Square 90° max.: 130 x 130 mm Working Range Flat 90° max.: 190 x 130 mm Working Range Round 90° max.: 170 mm The machine has been completely overhauled in our facility and is in like-new condition. The following components have been renewed, among others: Conversion to Siemens S7 PLC control Upgrade to Siemens HMI operator interface Upgrade to servo-driven pusher New electrical components New pneumatic lines New pneumatic components Conversion to valve manifold technology Optimized extraction performance New minimum-quantity lubrication system Replacement of general wear parts Overhaul of the operator cabin Dkedpjuiy Ngofx Ac Top Additionally, the machine is equipped with: Minimum-quantity lubrication system Saw kerf expansion (for high-quality cut surfaces without scoring) Pre-feed magazine for gentle handling of painted/anodized surfaces Scrap ejector integrated into pusher Foldable scrap tray Options: Magazine width 3000 mm Pusher length 6000 mm Pusher length 8000 mm Reinforced motor 5.5 kW Mass clamping device for parallel cutting of multiple workpieces Online support connectivity Delivery and installation at your site Staff training

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade: 560 mm Motor power: 6.5 / 8.0 kW Speed: 1500/3000 rpm Cutting speed: 2100 – 4200 m/min Dkodpfx Aeuiy Hroc Tsp Electronic saw height adjustment Working area, square max.: 170x170 mm Working area, flat max.: 300x150 mm Working area, round max.: 200 mm Saw feed: 0 – 40 mm/s, stepless adjustment Cut length: 5-950 mm (9999 mm with multiple stroke) Feed speed max.: 500 mm/s Weight approx. 1,900 kg Dimensions LxWxH: 2200 mm x 2700 mm x 1950 mm After a comprehensive retrofit, the machine is in like-new condition both technically and visually. Thanks to its features and robust design, it is highly efficient and suitable for a wide range of applications. The programmed HMI control enables easy and highly profitable operation. The soundproof enclosure minimizes noise emissions. The machine is completely overhauled in our facility according to customer requirements. The overhaul includes, among others, the following upgrades: - Conversion to Siemens S7 PLC - Upgrade to Siemens HMI operator interface - Replacement of the ball screw - Replacement of servo motor and servo drive - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve island - Optimization of extraction performance - Overhaul of minimum quantity lubrication system - Replacement of wear parts - Refurbishment of the enclosure Additional features: - Soundproof enclosure - Kerf extension (for high-quality cut surfaces without return marks) - Fully electronic height adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts. Labor and wear parts are excluded from the warranty. Options: - Multiple clamping device for parallel sawing of several workpieces - Flat magazine for automatic loading of material up to 6 m in length - Roller conveyors for raw material - Reinforced motor 18.0 kW (frequency controlled) - Delivery and installation at your site - Training for your personnel

Kondisi: perlu perbaikan (bekas), Tahun pembuatan: 2024, en-GB Dksdpfx Aeuiy I Aec Tjp

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024,

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhaul Year: 2024 Maximum Carbide Saw Blade Diameter: 500/550 mm Saw Motor Power: 6 kW Saw Motor Speed (6 steps): 2,400 – 3,200 rpm Saw Blade Cutting Speed (500-550 mm): 3,800 – 5,500 m/min Saw Blade Feed Rate, stepless adjustable: 0–40 mm/s Saw Height Control, stepless and fully electronic Working Range Square at 90° max.: 160 x 160 mm Working Range Flat at 90° max.: 380 x 60 mm Working Range Round at 90° max.: 165 mm Feed Length: 10–9,999 mm Feed Speed AC Servo max.: 400 mm/s Compressed Air Supply (on-site): 6 bar Weight (saw): approx. 2,850 kg Dimensions LxWxH (saw): approx. 2,900 mm x 1,725 mm x 2,200 mm Footprint LxW: 2,900 mm x 1,725 mm After completion of the retrofit, the machine is in as-new condition both technically and visually. Thanks to its design and features, the machine can be used highly efficiently for a wide range of applications. The positioning system ensures simple and highly profitable operation. The high-performance motor enables short cycle times even when cutting thick-walled profiles or solid materials. The soundproof enclosure keeps noise emissions to a minimum. The machine is fully refurbished in-house according to customer requirements. The following components were replaced or overhauled: - Upgrade to Siemens S7 PLC control system - Upgrade to Siemens HMI control panel - Replacement of ball screw spindle - Replacement of servo motor and servo drive Dodpfx Aceuiy Rqo Tskp - Replacement of main drive frequency inverter (optional) - New electrical components - New pneumatic lines - Service or replacement of all hydraulic cylinders and valve manifolds - Extraction system overhauled - Minimum lubrication system overhauled - Replacement of common wear parts - Soundproof enclosure refurbished The machine is also equipped with: - Soundproof enclosure - Manual zero-point adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all refurbished or replaced parts. Labour and wear parts are excluded from the warranty. Optional equipment: - Chain magazine for 4/6 m material lengths - Burr-free cutting system (for high-quality cut surfaces without return marks) - Horizontal clamping on the cutting line - End stop in the material feed unit - Reinforced motor, 11 kW - Roller conveyors - Delivery and installation at your site - Training for your staff

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, Overhauled: 2024 Saw blade width: 250–285 mm Motor power: 5.5 kW Cutting speed: 35–160 m/min Square workpiece capacity max.: 15–60 mm Round workpiece capacity max.: 15–70 mm Saw feed rate: 2–100 mm/s, steplessly adjustable Cut length: 5–250 mm Feed rate max.: 1000 mm/s Weight (saw) approx.: 1500 kg (magazine) approx.: 800 kg Dimensions LxWxH (saw) approx.: 1100 mm x 1600 mm x 2300 mm (magazine) approx.: 7500 mm x 1400 mm x 1600 mm The machine, due to its design and features, is suitable for high-volume cutting of steel and is the predecessor to the KASTOwa C7 and KASTOspeed C9 models. After a complete overhaul (retrofit), the system will be in like-new condition, which is guaranteed by us. On request, the machine is completely overhauled in our facility. This includes, among other things, renewal of the following: - New Siemens S7 PLC control - Retrofit to Siemens HMI - Conversion to fully electronic length selection (optional) - New electrical components - New pneumatic lines - Overhaul or replacement of all pneumatic components - New hydraulic lines - Overhaul or replacement of all hydraulic components - Overhaul of Menzel minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the loading magazine - Enhancement of the safety concept Additionally, the machine features: - A slip magazine for 6 m bars - Hydraulic material feeding unit Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts that we have overhauled or replaced. Labor and wear parts are excluded from the warranty. Options: - Conversion to swarf extraction - Conversion to manual trapezoidal spindle length stop 0–800 mm - Conversion to fully electronic ball screw stop 0–800 mm - Conversion of main saw drive to 18 kW Dsdpfxouizlcs Ac Tokp - Delivery and installation at your site - Training for your employees

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024,

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, manufacturer: Elumatec Model SA/ SAS 142 overhauled: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2800 rpm Saw blade cutting speed (500mm): 4400 m/min Saw height adjustment: stepless, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 150 mm Dkedsuiy Nyepfx Ac Tjp Pneumatic feeding length: 5-560, 10-1120 mm Compressed air connection (site): 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900mm x 1400mm x 1500mm Footprint LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in as-new technical and optical condition following completion of the retrofit. The machine will be fully overhauled in our workshop according to customer requirements. The following components, among others, have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - New electrical components - New pneumatic hoses - Maintenance or replacement of all pneumatic cylinders and valve terminals - Minimum lubrication system maintenance - Replacement of general wear parts - Refurbishment of safety enclosure/cabinet Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Options: - Expansion of cutting range (flat 90° max.: 300 x 120 mm) - Chip breaker expansion (for high-quality cut surfaces without return marks) - Servo-driven material feed - Servo-driven saw blade feed - Quick clamping device for rear feed stock - Delivery and installation at your location - Training of your staff

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024,