Beli Bacciottini Group Srl D2H High Speed bekas (49.131)
Urutkan hasil
- Harga terendah Harga tertinggi
- Iklan terbaru Iklan tertua
- Jarak terpendek Jarak maksimum
- Tahun pembuatan terbaru Tahun pembuatan tertua
- Pembaruan terbaru Pembaruan tertua
- Produsen dari A sampai Z Produsen dari Z ke A
- Relevansi
- Harga terendah
- harga
- Harga tertinggi
- harga
- Iklan terbaru
- Tanggal pengaturan
- Iklan tertua
- Tanggal pengaturan
- Jarak terpendek
- jarak
- Jarak maksimum
- jarak
- Tahun pembuatan terbaru
- tahun pembuatan
- Tahun pembuatan tertua
- tahun pembuatan
- Pembaruan terbaru
- pembaruan
- Pembaruan tertua
- pembaruan
- Produsen dari A sampai Z
- pabrikan
- Produsen dari Z ke A
- pabrikan
- Penamaan dari A ke Z
- Penunjukan
- Penamaan dari Z ke A
- Penunjukan
- Model dari A hingga Z
- Model
- Model dari Z ke A
- Model
- Referensi terendah
- referensi
- Referensi tertinggi
- referensi
- Waktu operasional terpendek
- Waktu operasional
- Waktu operasional terpanjang
- Waktu operasional
- relevansi
- relevansi
Iklan kecil
Szczecinek
10.564 km
Penggergajian lengkap (stasioner)
MADREWAE-400
Hubungi
Kondisi: baru, The AE-400 SERVO edger is designed for longitudinal edging and cutting of side boards supplied to the machine at high speeds (100-400 m/minute).
The machine interfaces directly with feeding and receiving conveyors for boards, operating in fully automatic mode.
The machine is equipped with a board scanner from above and below.
The maximum temporary output of the edger, up to 50 boards/min, can be achieved when cutting 2.5m boards to the same width without altering the saw blade spacing. Any adjustment of the edger’s components to the board’s width changes the throughput. Depending on the operational configuration, the average machine output ranges from 35-48 boards/min.
Technical data:
No. | Parameter | Value
--- | ----- | -----
1. Main saw spindle drive motor power: 55 kW
2. Saw spindle rotation speed: 3550 rpm
3. Saw blade diameter: 400 mm
4. Maximum cutting height: 50 mm
5. Number of saw blades: 2 to 3 pcs (2 floating saws)
6. Minimum board length: 2000 mm
7. Maximum raw material length: 6200 mm
8. Maximum number of boards after cutting 1 board: 2 pcs
9. Feed rate: 100-400 m/min
Cutting into 1 board – with two saw blades (2 floating blades):
- Minimum saw blade spacing (board width after cutting): 75 mm
- Maximum outer blade spacing (board width after cutting): 300 mm
Cutting into 2 boards – with three saw blades (2 floating blades):
- Spacing of blades on fixed coupling (board width after cutting): 50-100 mm
- Spacing between floating blades (board width after cutting): 50-100 mm
Klsdpfenygvrex Afijr
- Minimum width for cutting into 2 boards: 2 x 50 mm
- Maximum width for cutting into 2 boards: 2 x 100 mm
Other machine configurations are available upon request. Machines are custom-built.
We also manufacture other sawmill lines: log sorting lines, board sorting lines, board stackers, conveyors.
Iklan kecil
Putten
11.324 km
Pengubah kecepatan tinggi CW / DCW / XCW
SnelwisselorenCW / DCW / XCW
Hubungi
Kondisi: baru, In stock: CW, XCW & DCW plate standard/inclined quick coupler weld-on brackets for excavators. Hardox 400. Price incl. VAT: CW00 €36, CW05 €115, CW10 €174, CW20 €335, CW30 €400, CW40 €410, DCW05 €97, DCW10 €190, DCW40 €410, XCW00 €30, XCW05 €100, XCW10 €120, XCW40 €610. Bore diameter: 30 - 60 mm, R 30 - 60 mm, hook to hole spacing: 150 - 475 mm. Pieper Trading Company, Nijkerkerstraat 71, 3882 PD Putten (Gelderland).
Kljdpfsf Tny Sox Afior
Iklan kecil
Hilzingen
11.210 km
Mesin meninju otomatis
BRUDERERBSTA 50USL
Hubungi
Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1996, gaya penekanan: 50 t, panjang langkah: 51 mm, Bruderer BSTA 50USL,
- Meja 1100 mm
- Mesin sedang dalam proses overhaul, dengan kontrol baru
- Pengumpan opsional BBV atau Servo
Ksdpfewu Rraox Afielr
Hubungi kami untuk penawaran detail!

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
Iklan kecil
Sremska Mitrovica
10.421 km
Mesin meninju otomatis
BRUDERERBSTA 80
Hubungi
Kondisi: bekas, Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, panjang meja: 950 mm, lebar meja: 910 mm, gaya penekanan: 80 t, berat keseluruhan: 16.500 kg, gaya punching: 80 t, Max. pressing force: 80 tons / 800 kN
Stroke rate:
Max.: 1000 strokes/min
Min.: 100 strokes/min
Klsdpfx Aexzr Rusfior
Mains voltage: 400 V
Mains frequency: 50 Hz, 60 Hz
Power consumption: 43 kW
Control voltage AC: 24 V
Compressed air connection: 6–10 bar
Stroke adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm
Ram adjustment: 76 mm
Average upper tool mass: 600 kg
Maximum tool width: 970 mm
Clamping area table:
L–R: 950 mm
F–B: 910 mm
Clamping area ram:
L–R: 760 mm
F–B: 510 mm
Max. tool width (L–R): 970 mm
Strip feed height:
Max.: 160 mm
Min.: 70 mm
Strip feeder (left) Bruderer BBV 202/120
Max. strip width: 202 mm
Feed length: 0–120 mm
Table opening:
L–R: 920 mm
F–B: 320 mm
Machine dimensions:
Length: 2834 mm
Width: 1742 mm
Height: 3460 mm
Total weight with 1× BBV 202: approx. 17,500 kg
Control cabinet dimensions:
Length: 1200 mm
Width: 500 mm
Height: 1025 mm
Weight: approx. 250 kg
The sound enclosure is not included in the offer, but can be purchased separately.
Our stock offer also includes many further models from Bruderer, Schaal, Mabu, and Bihler presses as well as reel and straightening machines.
Iklan kecil
Solingen
11.254 km
Menekan kolom ganda tekan otomatis
BRUDERERBSTA 20 E
Hubungi
Kondisi: bekas, Tahun pembuatan: 1989, Druckkraft 20 t
Gesamtleistungsaufnahme 20 kW
Maschinengewicht ca. 5 t
Die Unterlagen zu dieser Maschine sind nicht vollständig vorhanden; Elektropläne liegen bei.
Kedpfxsvr Hkzo Afislr
Die Anlage war bis zuletzt in Betrieb.
Wir verkaufen die Maschine als Ersatzteilträger, unter Ausschluss jeglicher Gewährleistung und Rücknahme, frei verladen LKW mit Kran in Soingen.
Iklan kecil
Misterton
11.699 km
Kecepatan tinggi mangkuk mixer
ColletteSM200
Hubungi
Kondisi: hampir baru (bekas), Collette Hochgeschwindigkeits-Knetmaschine
Modell: SM200
Klsdpfx Afod D N Rmsisr
Hochgeschwindigkeits-Knetmaschinen, 200 Liter, Edelstahlbehälter und -mischwerkzeug, nagelneue Unitronics HMI- und PLC-Steuerung.
Iklan kecil
Welden
11.058 km
Mesin bor radial berkecepatan tinggi
DonauDR 23
Hubungi
Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang meja: 1.200 mm, lebar meja: 500 mm, penjepit spindle: MK 3, jenis penyesuaian ketinggian: listrik, Donau DR23 Mesin Bor Radial – Mesin Berkualitas Kokoh
Dijual mesin bor radial Donau DR23 yang andal, ideal untuk bengkel, konstruksi logam, atau aplikasi industri. Mesin ini menonjol dengan konstruksi yang kokoh, presisi tinggi, serta kemampuan penggunaan yang fleksibel untuk pengeboran, chamfering, dan pemotongan ulir.
Kjdpjyrtkxjfx Afielr
Rincian:
Pabrikan: Donau
Model: DR23
Mesin bor radial direkondisi oleh Vaumtec
Chuck cepat tukar
Konstruksi dari cor yang stabil
Lengan penyangga dapat disesuaikan untuk pengerjaan fleksibel pada benda kerja berukuran besar
Cocok untuk baja, aluminium, dan logam lainnya
Putaran kanan-kiri
Iklan kecil
Ennepetal
11.234 km
Mesin press tempa
HidralmacEinständerpresse
Hubungi
Kondisi: bekas, Tahun pembuatan: 2021, nomor mesin/kendaraan: A2536805, gaya penekanan: 40 t, Hidralmac single-column press – 40 t forging press – stroke 250 mm
For sale is a hydraulic single-column press (C-frame press) from the manufacturer Hidralmac with a press force of 40 t. The machine is designed for forging, forming, and bending operations and can be custom-built to individual customer requirements. Thanks to adjustable speeds, precise position control, and flexible operating modes, it is suitable for both manual setup work and automated processes.
=====
Technical Data & Information:
Hydraulic single-column press – 40 t
==== General Information
- Manufacturer: Hidralmac
- Model: Single-column press / forging press
- Design: C-frame press
- Press force: 40 t
- Build time: approx. 3 months after receipt of payment
==== Working Area
- Maximum daylight: 450 mm
- Stroke / Travel: 250 mm
==== Table & Ram
- Table plate: 600 × 650 mm with T-slots
- Ram plate: 500 × 200 mm
- Table opening: 200 × 170 mm
- Table height: 850 mm
==== Speeds
- Approach speed: max. 90 mm/s
- Pressing speed: 10 mm/s
- Return speed: max. 90 mm/s
- Setup mode speed: approx. 9.5 mm/s
==== Hydraulics & Drive
- Motor power: 5.5 kW
- Oil tank: 200 l
- Return force: 6.3 t
==== Controls & Features
- Positioning accuracy: ± 0.5 mm
- Adjustable dwell time: 0–10 s (in 0.1 s increments)
Kledofxyhfopfx Afisr
- Pressing pressure adjustable via control panel
- Switching between manual and automatic mode via key switch
- Two-hand control for safe operation
- Sensor-based position control (top dead center, bottom dead center, switching point)
==== Operating Modes
- Manual setup operation with stop at any time
- Bending mode via two-hand control
- Automatic mode for closed tools
- Optionally usable for punching, piercing, and bending
=====
Forging operations, forming technology, bending processes, punching, piercing operations, small batch production, toolmaking
Single-column press, C-frame press, forging press, hydraulic press, industrial press, bending press, die tryout press, tool try-out press
Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with the national Brazilian safety standard NR 12, which is based on these. Our core competency is special-purpose machine construction and press automation. We supply custom-built hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we predominantly use components from leading European manufacturers.
Iklan kecil
Leipzig
10.887 km
Mesin serut empat sisi
WINTERTIMBERMAX 6-23-GH HIGH-SPEED
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, en-GB_Timbermax6-23GH_HighSpeed_2024
Klsdpfx Afev A Hqpeisr
Iklan kecil
Leipzig
10.887 km
Mesin serut empat sisi
WINTERTIMBERMAX 5-20 HIGH-SPEED
Hubungi
Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 3630 x 1790 x 1760 mm
Weight: 4300 kg
Total Power Requirement: 42.6 kW
Four-Sided Planer / Moulder TIMBERMAX 5-20 High-Speed
- Planing width: 20 - 200 mm
- Planing height: 8 - 125 mm
- Grooved bed
- Minimum workpiece length: 590 mm (single) / 150 mm (series)
- 5 spindles
- Spindle diameter: 40 mm
- Speed: 8000 rpm
- Feed speed, stepless: 10 - 60 m/min
- Bottom planing shaft, max. tool diameter: 125 mm
- Right vertical spindle, max. tool diameter: 100 - 180 mm
- Left vertical spindle, max. tool diameter: 100 - 180 mm
- Upper horizontal spindle, max. tool diameter: 100 - 180 mm
- Second lower horizontal spindle, max. tool diameter: 100 - 180 mm
Spindle sequence:
1. Bottom: 5.5 kW
2. Right vertical: 5.5 kW
3. Left vertical: 5.5 kW
4. Top: 7.5 kW
5. Second bottom: 5.5 kW
- Feed motor: 7.5 kW
- Height adjustment motor: 0.75 kW
- Conveyor belt motor: 0.75 kW
- Total power: 42.6 kW
- Compressed air connection max. 6 bar
- Extraction port: 5 x 120 mm
- Dimensions: L=3630, W=1790, H=1760 mm
- Weight: 4300 kg
Included features:
- Hard chrome-plated tables
- CE standard, TÜV Rheinland certification
- Motor-driven rollers in the table
- Pneumatic pressure for feed rollers
Kodpfx Ajv A Hpfjfijlr
- Feed system with cardan drive
- Lubrication pump
OPTIONAL:
Automatic feeding system with conveyor belt for finger-jointed timber, wood thickness 20-100 mm
- Wood width: 20-100 mm
- Wood length: 150-450 mm
- Speed of centrifugal disc: 45 rpm
- Centrifugal diameter: 2100 mm
- Total motor power: 3.69 kW
- Main spindle motor: 2.2 kW
- Separator motor: 0.37 kW
- Wood sanding motor: 0.37 kW
- Feed motor: 0.75 kW
- Conveyor unit size: 3000 x 220 mm
- Weight: 1580 kg
Iklan kecil
Bächingen an der Brenz
11.083 km
Mesin bor radial berkecepatan tinggi
DONAUDanuflex 145
Hubungi
Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots
• Arm travel 1050 mm
• Drill spindle Morse taper 4
• Infinitely variable speed adjustment
• Infinitely variable quill feed
• Tapping device
• Two 18 mm T-slots each on the machine base, rear and left sides
• Machine lamp
• Central lubrication system
• Table top machined all around
• Drill guard
• Coolant system
Dimensions and Travel Ranges
Tool holder MK 4
Column diameter mm 195
Table dimensions mm 1200 x 750
Number of T-slots 5
T-slot spacing mm 125
Quill stroke mm 220
Column stroke mm 450
Distance spindle nose – min mm 40
table top max. mm 710
Distance spindle nose – min mm 840
base plate max. mm 1510
Drilling radius min mm 540
max. mm 1590
Work table height mm 900
Machining Capacities
Drilling capacity (solid) St 60 ⌀ 45
GG 22 ⌀ 55
Thread cutting St 60 M 36
Kledjyhdvkspfx Afier
GG 22 M 45
Main Spindle Drive
AC motor, frequency controlled kW 5.5 at 100% duty cycle
Speed range: min-1 15 - 2800
Torque Nm max. 250
Constant from: min-1 15 - 200
Feed Drives
Feed, infinitely variable mm/rev 0.02 - 0.7
Feed force N 12000
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Total connected load kVA 9.3
Weight of DANUFLEX 145 (without packaging)
With table 750 x 1200 mm kg 2600
Documentation
Operating manual, incl.
Lubrication and hydraulic diagram
Electrical circuit diagram
Iklan kecil
Bächingen an der Brenz
11.083 km
Mesin bor radial cepat
DONAUDanumeric 440
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications
• Worktable 1800 x 600 mm with 4 T-slots
• Arm travel 1050 mm
• Drilling spindle SK 40 with tool clamping system
• Infinitely variable speed programming
• Infinitely variable quill feed via three-phase servo motor
• 2 T-slots (18 mm) at the rear of the machine base
• 2 T-slots (18 mm) on the left side of the machine base
• Thread cutting device
• Central lubrication
• Coolant system
• Machine lamp
• CE marking
Kedpfx Asu Aa I Sjfielr
• Safety guard
• USB interface
Dimensions and Travel
Tool holder SK 40
Column diameter mm 195
Table dimensions mm 1800 x 600
Number of T-slots 4
Distance between T-slots mm 125
Quill stroke (Z-axis) mm 200
Column travel (W-axis) mm 410
Distance spindle underside - min mm 70
Table top max. mm 680
Distance spindle underside - min mm 970
Floor max. mm 1580
Drilling radius mm 540 - 1590
Working table height mm 900
Machining Capacity
Drilling capacity solid St 60 Ø 40
GG 22 Ø 50
Thread cutting St 60 M 36
GG 22 M 42
Main Spindle Drive
AC motor, frequency controlled kW 5.5 at 100% ED.
Speed range: min-1 15 - 2800
Torque Nm max. 250
Constant from min-1 15 – 2000
Feed Drives
X-axis - AC servo motor kW 0.25
Y-axis - AC servo motor kW 0.25
Z-axis - AC servo motor kW 4.50
W-axis - AC servo motor kW 2.50
Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5
Rapid traverse speed (W): m/min 3
Feeds, infinitely variable mm/min 5 – 2000
Accuracy
Positioning accuracy X-, Y-axis
over 1200 mm mm ± 0.075
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Hydraulic unit for clamping kW 0.75
Total connected load kVA 13.0
Weight Danumeric 440 (without packaging)
with table 1800 x 600 mm kg 2800
CNC Control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm
Position display: Cartesian or polar, absolute or incremental values
Measuring unit: mm or inch / degrees
Interpolation: 2 axes (X, Y)
Technology Database:
Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subroutine technology: yes
Machining Cycles
Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry
Zero point determination: Cycles for determining zero points by manually probing the workpiece for:
- Freely mounted rectangular parts
- Freely mounted round parts
- Centering for cast and flame-cut parts
- Angle position detection for round parts by probing reference edges/surfaces
Test graphics: Graphical display of drilling patterns
Data interfaces: USB
Iklan kecil
Bächingen an der Brenz
11.083 km
Mesin bor radial cepat
DONAUDanumeric 440
Hubungi
Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024
Machine Specification
• Worktable 1800 x 600 mm with 4 T-slots
• Cantilever travel 1050 mm
• Drilling spindle SK 40 with automatic tool clamping
• Infinitely variable spindle speed programming
• Stepless quill feed via three-phase servomotor
• 2 x 18 mm T-slots at the rear of the machine base
• 2 x 18 mm T-slots on the left side of the machine base
• Thread cutting unit
• Centralized lubrication
• Coolant system
• Machine lamp
• CE marking
• Safety device
• USB interface
Dimensions and Travel
Tool holder: SK 40
Column diameter: 195 mm
Table dimensions: 1800 x 600 mm
Number of T-slots: 4
T-slot spacing: 125 mm
Quill stroke (Z axis): 200 mm
Column travel (W axis): 410 mm
Distance spindle nose–table (min): 70 mm
Distance spindle nose–table (max): 680 mm
Distance spindle nose–floor (min): 970 mm
Distance spindle nose–floor (max): 1580 mm
Drilling radius: 540 - 1590 mm
Worktable height: 900 mm
Machining Capabilities
Max. solid drilling capacity: St 60: Ø 40 mm
GG 22: Ø 50 mm
Tapping capacity: St 60: M 36
GG 22: M 42
Main Spindle Drive
Klodou Dg D Ajpfx Afier
AC motor, frequency controlled: 5.5 kW at 100% duty cycle
Speed range: 15 – 2800 rpm
Torque: max. 250 Nm
Constant from: 15 – 2000 rpm
Feed Drives
X-axis AC servo motor: 0.25 kW
Y-axis AC servo motor: 0.25 kW
Z-axis AC servo motor: 4.50 kW
W-axis AC servo motor: 2.50 kW
Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min
Rapid traverse speed (W): 3 m/min
Feed rates infinitely variable: 5 – 2000 mm/min
Accuracy
Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm
Electrical Data
Operating voltage/frequency: 400 V / 50 Hz
Control voltage: 24 V
Hydraulic unit (clamping): 0.75 kW
Total connected load: 13.0 kVA
Weight (Danumeric 440, without packaging)
With 1800 x 600 mm table: 2800 kg
CNC Control System
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm
Position indication: Cartesian or polar, in absolute or incremental values
Units: mm or inch / degrees
Interpolation: 2 axes (X, Y)
Technology Database:
Tool management, tool suggestions by machining type, material-dependent cutting data recommendations
Tool management: max. 500 tools
Subprogram system: yes
Machining Cycles
Standard software options:
Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions
Zero point determination:
Cycles to determine zero points by manual probing of workpieces for:
- Any clamped rectangular parts
- Any clamped round parts
- Alignment of cast and flame-cut parts
- Angle position detection on round parts by probing reference edges or faces
Test graphics: Graphical display of drilling patterns
Data interfaces: USB
Iklan kecil
Bächingen an der Brenz
11.083 km
Mesin bor radial cepat
DONAUDanumeric 440
Hubungi
Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications
• Worktable 1800 x 600 mm with 4 T-slots
• Arm travel 1050 mm
• Drilling spindle SK 40 with tool clamping system
• Infinitely variable speed programming
• Infinitely variable quill feed via three-phase servo motor
• 2 T-slots (18 mm) at the rear of the machine base
• 2 T-slots (18 mm) on the left side of the machine base
• Thread cutting device
• Central lubrication
• Coolant system
• Machine lamp
• CE marking
• Safety guard
• USB interface
Dimensions and Travel
Tool holder SK 40
Column diameter mm 195
Table dimensions mm 1800 x 600
Number of T-slots 4
Distance between T-slots mm 125
Quill stroke (Z-axis) mm 200
Column travel (W-axis) mm 410
Distance spindle underside - min mm 70
Table top max. mm 680
Distance spindle underside - min mm 970
Floor max. mm 1580
Drilling radius mm 540 - 1590
Working table height mm 900
Machining Capacity
Drilling capacity solid St 60 Ø 40
GG 22 Ø 50
Thread cutting St 60 M 36
GG 22 M 42
Main Spindle Drive
AC motor, frequency controlled kW 5.5 at 100% ED.
Speed range: min-1 15 - 2800
Torque Nm max. 250
Constant from min-1 15 – 2000
Feed Drives
X-axis - AC servo motor kW 0.25
Y-axis - AC servo motor kW 0.25
Z-axis - AC servo motor kW 4.50
Ksdpfx Afsrmkfnsielr
W-axis - AC servo motor kW 2.50
Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5
Rapid traverse speed (W): m/min 3
Feeds, infinitely variable mm/min 5 – 2000
Accuracy
Positioning accuracy X-, Y-axis
over 1200 mm mm ± 0.075
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Hydraulic unit for clamping kW 0.75
Total connected load kVA 13.0
Weight Danumeric 440 (without packaging)
with table 1800 x 600 mm kg 2800
CNC Control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm
Position display: Cartesian or polar, absolute or incremental values
Measuring unit: mm or inch / degrees
Interpolation: 2 axes (X, Y)
Technology Database:
Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subroutine technology: yes
Machining Cycles
Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry
Zero point determination: Cycles for determining zero points by manually probing the workpiece for:
- Freely mounted rectangular parts
- Freely mounted round parts
- Centering for cast and flame-cut parts
- Angle position detection for round parts by probing reference edges/surfaces
Test graphics: Graphical display of drilling patterns
Data interfaces: USB
Iklan kecil
Bächingen an der Brenz
11.083 km
Mesin bor radial cepat
DONAUDanumeric 440
Hubungi
Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications
• Worktable 1800 x 600 mm with 4 T-slots
• Arm travel 1050 mm
• Drilling spindle SK 40 with tool clamping system
• Infinitely variable speed programming
• Infinitely variable quill feed via three-phase servo motor
• 2 T-slots (18 mm) at the rear of the machine base
• 2 T-slots (18 mm) on the left side of the machine base
• Thread cutting device
• Central lubrication
• Coolant system
• Machine lamp
• CE marking
• Safety guard
• USB interface
Dimensions and Travel
Tool holder SK 40
Column diameter mm 195
Table dimensions mm 1800 x 600
Number of T-slots 4
Distance between T-slots mm 125
Quill stroke (Z-axis) mm 200
Column travel (W-axis) mm 410
Distance spindle underside - min mm 70
Table top max. mm 680
Distance spindle underside - min mm 970
Floor max. mm 1580
Drilling radius mm 540 - 1590
Working table height mm 900
Machining Capacity
Drilling capacity solid St 60 Ø 40
GG 22 Ø 50
Thread cutting St 60 M 36
GG 22 M 42
Main Spindle Drive
AC motor, frequency controlled kW 5.5 at 100% ED.
Speed range: min-1 15 - 2800
Torque Nm max. 250
Constant from min-1 15 – 2000
Feed Drives
X-axis - AC servo motor kW 0.25
Y-axis - AC servo motor kW 0.25
Z-axis - AC servo motor kW 4.50
W-axis - AC servo motor kW 2.50
Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5
Rapid traverse speed (W): m/min 3
Feeds, infinitely variable mm/min 5 – 2000
Accuracy
Positioning accuracy X-, Y-axis
over 1200 mm mm ± 0.075
Electrical Data
Operating voltage / frequency V / Hz 400 / 50
Control voltage V 24
Hydraulic unit for clamping kW 0.75
Total connected load kVA 13.0
Weight Danumeric 440 (without packaging)
with table 1800 x 600 mm kg 2800
CNC Control
Axes: 4 (X, Y, Z, W), expandable
Processor: 32-bit CPU
Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm
Position display: Cartesian or polar, absolute or incremental values
Measuring unit: mm or inch / degrees
Interpolation: 2 axes (X, Y)
Technology Database:
Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions
Tool management: max. 500 tools
Subroutine technology: yes
Ksdpfx Afevv Spkjijlr
Machining Cycles
Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry
Zero point determination: Cycles for determining zero points by manually probing the workpiece for:
- Freely mounted rectangular parts
- Freely mounted round parts
- Centering for cast and flame-cut parts
- Angle position detection for round parts by probing reference edges/surfaces
Test graphics: Graphical display of drilling patterns
Data interfaces: USB
Iklan kecil
Eisenberg (Pfalz)
11.223 km
Mesin bor radial cepat
DonauDR 32
Hubungi
Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, gores kuas bulu: 190 mm, kecepatan spindel (min.): 41 rpm, kecepatan spindel (maks.): 1.800 rpm, berat keseluruhan: 1.920 kg, berat benda kerja (maks.): 17 kg, ketebalan pelat baja (maks.): 32 mm, torsi: 250 Nm, tinggi meja: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 -
completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE
(clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve the table frame)
Technical Data:
Kljdpforn Riqjx Afior
Drilling capacity in solid material: St 60/E335 mm Ø 32
(at feed 0.20 mm/rev): GG 22 mm Ø 45
Thread cutting: St 60/E355 M26
Thread cutting: GG22 M35
Tool holder: MK4
Column diameter: mm Ø 195
Distance spindle nose to table: min./max. mm 260/660
Worktable height: mm 900
Quill stroke: mm 190
Column travel: mm 400
Spindle speeds range I: rpm 41-1800
Feeds: mm/rev 0.1-0; 15-0; 20-0.3
Torque at spindle: max. Nm 250
Boom ease of movement: Radial N 25
Boom ease of movement: Axial N 25
Clamping force: Radial Nm 3500
Clamping force: Axial N 5500
Feed force: N 7500
Max. permissible mass: kg 17
Max. permissible moment of inertia: kgm 0.002176
Workpiece:
Max. table load: kg 1000
Center of gravity: in the middle of the working surface
Iklan kecil
Jerman
10.886 km
Stanzautomat - mechanisch
KAISERV 40
Hubungi
Kondisi: bekas, Tahun pembuatan: 1985, Technical Details:
Punching force: 40 kN
Required air pressure: 8 bar
Adjustable ram stroke min. / max.: 6 - 50 mm
Ram adjustment: 50 mm
Stroke rate: 70 - 400 strokes/min
Table size (LxW): 480 x 445 mm
Table cut-out (LxW): 250 x 112 mm
Overrun time: 80 ms at 450 rpm
Kjdpfx Afeu Icwgeielr
Ram clamping surface (LxW): 420 x 345 mm
Ram bore: Ø 40 x 230 mm
Operating voltage: 380 V
Control voltage: 220 V
Frequency: 50 Hz
Total power requirement: approx. 19 kVA (approx. 7.5 kW)
Control cabinet weight: 0.3 t
Machine weight approx.: 4000 kg
40t punching press without roller feed/strip line
Operation via control panel/two-hand control
Modes: manual / automatic
Iklan kecil
Schöneck
11.156 km
Schnelllauftor
SchnellauftoreVerschiedene Größen
Hubungi
Kondisi: bekas, Fungsionalitas: belum diuji, Pintu cepat berbagai ukuran, bekas, sudah dibongkar, harga per pintu €100,00
Ksdpfx Aeynnv Iefislr
Iklan kecil
Emskirchen
11.035 km
Sistem Pemanggangan Sistem Suhu Berkecepatan Tinggi
KodakTSO-850
Hubungi
Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 1369, Kodak TSO-850 High-Speed Thermo System (Curing/Baking System), Year 2007 – Serial No. 1369.
• Working width max.: 850 mm
Ksdoh Aya Iepfx Afielr
• Power supply: 400V / 50Hz / 40A
Online video inspection via Skype available.
We would be pleased to welcome you for an on-site visit – further machines in stock.
Available immediately – inspection possible.
Location: Emskirchen / Nuremberg – testing possible.
Lelang
Lelang telah berakhir
Bayern
10.910 km
Pusat pemesinan vertikal
ChironMill 2000 high speed plus
Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 685 mm, jarak gerak sumbu Z: 630 mm, model controller: Siemens 840D, kecepatan rotasi (maks.): 20.000 rpm, The spindle of the machine was replaced in 2022! The original purchase price of the machine was EUR 600,000!
TECHNICAL DETAILS
Travel X-axis: 2,000 mm
Travel Y-axis: 685 mm
Travel Z-axis: 630 mm
Rapid traverse on all axes: 40 m/min
Axis acceleration: 0.25 g
Max. spindle speed: 20,000 rpm
Max. rotary table speed: 1,000 rpm
Tool changer positions: 92
Tool holder: HSK 63
NC swivel axis: ± 100°
MACHINE DETAILS
Control: Siemens 840D
EQUIPMENT
Remote diagnostics and teleservice
Maintenance instructions available on-screen
5-axis milling package
Fixed table with integrated Kessler rotary milling table DTE 520
NC swivel head with spindle assembly
Direct measuring systems
Chip conveyor (hinged belt)
Coolant system HL 450 / 900 (IKZ - internal coolant supply)
Full-flow cleaning via paper band hydrostatic filter HL450
Coolant filtration: 50 µm nominal
Chip gun
Coolant recirculating chiller unit
Klodpfx Aeymnykofior
Additional tray flushing
Machine prepared for air-through-spindle
Extraction system for the work area
MILL 2000 safety package with reinforced enclosure and safety glass
Zero point clamping system NSL tur 570-5-Z for DTE 520
Tool breakage control
Measuring probe Renishaw OMP 40-2LS
Rotary viewing window
Chiron Powerservice
Siemens CNC control with OP019 and 19" color screen
Operating mode: 4
MCIS DNC for transmitting and receiving CNC programs in networked operation
Siemens tool life monitoring
Measuring in JOG (zero point determination during manual setup)
Tool loading and unloading station for main time parallel tool changes at the background magazine
Additional window for background magazine
Swiveling control panel for optimal view of the work area during setup
Note: The two vices on the NC rotary table and the tool holders in the tool changer are not included in the offer.
Iklan kecil
Hilzingen
11.210 km
Mesin meninju otomatis
BRUDERERBSTA 20H
Hubungi
Kondisi: bekas, Tahun pembuatan: 1987, Fungsionalitas: belum diuji, gaya penekanan: 20 t, panjang langkah: 38 mm, berat keseluruhan: 3.600 kg, BSTA 20 H, dengan BBV 190/85 feeding kiri, tahun pembuatan 1987, langkah ayun yang dapat diatur 8 hingga 38 mm, daya tekan nominal 20 t, lebar pemasangan alat maksimal 420 mm. Untuk suku cadang atau perbaikan. Dijual dalam kondisi "apa adanya" tanpa pemeriksaan teknis. Hubungi kami untuk informasi lebih lanjut!
Kjdjw S E Tlspfx Afislr
Segel kepercayaan
Dealer resmi yang disertifikasi oleh Machineseeker

Iklan kecil
Würzburg
11.082 km
Truk palet listrik berkecepatan tinggi
JungheinrichESE 20
Hubungi
Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 6.431 h, Jungheinrich ESE 20 High-Speed Electric Pallet Stacker
Ref: RA2396
Manufacturer: Jungheinrich
Model: ESE 20
Kedpowb I Hbofx Afijlr
Year of manufacture: 2003
Serial number: 90079958
Battery replaced: 2016
Inspection (TÜV): valid until 2023
Operating hours: 6431 h
Fork length: 1150 mm
Outside fork width: 540 mm
Maximum load capacity: 2000 kg
Lift height: 125 mm
Travel speed: 8.5–12.5 km/h
Included:
• Combi instrument and information/service display
• Fast charger 380V
Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg
For individual, professional advice, just get in touch with us. Contact us by phone or email. We are happy to support you with planning and implementing your projects.
We look forward to hearing from you.
Best regards,
Your Dr. Sonntag GmbH & Co. KG Team
Your specialist and point of contact for intralogistics.
Iklan kecil
Würzburg
11.082 km
Truk palet listrik berkecepatan tinggi
JungheinrichESE 20
Hubungi
Kondisi: bekas, Tahun pembuatan: 2003, jam operasional: 4.267 h, Jungheinrich ESE 20 High-Speed Electric Pallet Stacker
RA2397
Manufacturer: Jungheinrich
Model: ESE 20
Ksdewcqg Hspfx Afielr
Year of manufacture: 2003
Serial number: 90074846
Battery replacement: 2016
Safety inspection (TÜV): valid until 2023
Operating hours: 4,267 h
Fork length: 1,930 mm
Outer fork width: 540 mm
Maximum lifting capacity: 2,000 kg
Lifting height: 125 mm
Travel speed: 8.5–12.5 km/h
Included:
- Combination instrument and information/service display
- 380V rapid charger
Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg
For personalized and professional advice, feel free to contact us. Get in touch by phone or email. We are happy to support you with the planning and realization of your projects.
We look forward to hearing from you.
Kind regards,
Your Dr. Sonntag GmbH & Co. KG team
Your specialist and contact partner for intralogistics.
Iklan kecil
Thisted
11.008 km
OTOMATIS HIGH SPEED TRAY SEALER ISHIDA
Ishida
Hubungi
Tahun pembuatan: 2008, Kondisi: baik (bekas), de4eede2-2461-4e1c-9f20-440e5d0d61ed
Klodpfx Afoh Dbwijior
Iklan kecil
Eislingen/Fils
11.123 km
Menekan kolom ganda tekan otomatis
WEINGARTENHU 2-200.12
Hubungi
Kondisi: bekas, Tahun pembuatan: 1988, Pressure 200 t
Stroke 30 - 160 mm
Stroke rate 40 - 120 /min
Upright gap 1500 / 1300 mm
Installation height (stroke + ram adjustment at top) 860 mm
Lateral column passage 600 x 530 mm
Table area 1250 x 1250 mm
Through-opening in table 550 x 300 mm
Table height above floor 1000 mm
Ram area 1250 x 1000 mm
Ram adjustment 125 mm
Material width 30 - 500 mm
Material thickness 0.5 - 3.0 mm
Feed length 0 - 999.9 mm
Drive power 50.0 kW
Kedpfx Aevut S Defielr
Weight 34.00 t
Space requirements approx. 4.0 x 1.7 x 5.2 m (LxWxH)
Approved for automatic operation according to German accident prevention regulations (UVV)
with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, automatic stroke adjustment.
Kami memudahkan pencarian untuk Anda: "bacciottini group srl d2h high speed"
Anda akan menerima penawaran baru melalui email secara langsung dan gratis.
Anda dapat mengakhiri tugas pencarian kapan saja.

Informasi sekarang
+44 20 806 810 84
+44 20 806 810 84
Pasang iklan sekarang
*per iklan/bulan
























































































































































