Beli Beutler Press Eksentrik bekas (12.756)

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 80 t, lebar meja: 600 mm, panjang meja: 800 mm, tinggi meja: 850 mm, lubang tembus di meja: 190 mm, penyesuaian silinder hidrolik: 85 mm, penyesuaian langkah: 100 mm, Perlengkapan: penghadang cahaya keselamatan, D TYPE ECCENTRIC PRESSES – GENERAL FEATURES • Steel construction body • Stress relieving by vibration for the body and welded parts Isdpfxsvxhb Uj Afioia • Table parallelism and perpendicularity tolerances comply with ISO and DIN standards • Pneumatic clutch and brake combination – OMPI, Italy • Ram supported by 8 guides • Ram with cushion cylinder • Parts such as ram, connecting rod, and slide block made of GS52 steel casting • High strength monoblock crankshaft – 4140 • Bronze bushing in connecting rod (Zr14) • Rear flywheel • Supplied with spare table • Hydraulic overload protection • Motorized table-to-ram adjustment • Automatic central lubrication • Pneumatic pedal with latch and dual-hand control with timer • Electric counter • PLC application and touchscreen – DELTA • Electrical switchgear by SIEMENS and SCHNEIDER • CE conformity – OPTIONAL • Finger protection light barriers – SICK, LEUZE • Safety PLC (monitors all electric systems, valves, two-hand and pedal) – PILZ • Dual-coil safety valve – GPA, TOPAIR • Position-locked limit switch and control panel • Safety block • Protective safety guards in compliance with CE directives MODEL D TYPE MONOBLOCK FRAME Capacity 80 Ton Distance Between Table and Ram 400 mm Distance Between Side Frames 880 mm Ram Adjustment 85 mm Approx. Press Width 1150 mm Approx. Press Depth 1500 mm Approx. Press Height 2500 mm Table Bore Diameter 190 mm Table Size 600 / 800 mm Die Clamping Bore Diameter 40 mm Ram Dimensions 245 / 410 mm Table Height from Floor 850 mm Stroke Adjustment 10 / 100 mm Strokes per Minute 50 spm Motor Power 7.5 kW Motor Speed 1450 RPM Approx. Weight 6,500 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 125 t, lebar meja: 700 mm, panjang meja: 900 mm, lubang tembus di meja: 210 mm, penyesuaian silinder hidrolik: 100 mm, Perlengkapan: penghadang cahaya keselamatan, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES o Steel construction frame o Vibration stress relief applied to the frame and welded parts o Table parallelism and perpendicularity tolerances in accordance with ISO and DIN standards o Pneumatic clutch and brake combination – OMPI-Italy o Slide guided in 8 bronze bushings Ijdpfx Afsvxhqvsisia o Ram with cushion cylinder o Steel cast parts: ram, connecting rod, and pitman – GS52 o High-strength solid crankshaft – 4140 o Bronze bushings inside the connecting rod (Zr14) o Rear-mounted flywheel o Spare bolster plate o Hydraulic overload protection o Motorized table-ram adjustment o Automatic central lubrication o Pneumatic pedal with latch and dual-hand control with timer o Electric counter o PLC control and touchscreen – DELTA o Electrical switchgear: SIEMENS-SCHNEIDER o CE conformity – OPTIONAL o Finger protection light curtains – SICK, LEUZE o Safety PLC (controls all electrical system, valve, dual-hand and pedal) – PILZ o Double-coil safety valve – GPA, TOPAIR o Locked position switch and control panel o Safety block o Protective guards in compliance with CE safety directives TYPE D-TYPE MONOBLOCK FRAME Capacity 125 Ton Bed – Ram Distance 500 mm Distance Between Housings 1000 mm Ram Adjustment 100 mm Approx. Press Width 1250 mm Approx. Press Depth 1750 mm Approx. Press Height 2850 mm Table Bore Diameter 210 mm Table Size 700 / 900 mm Die Clamping Slot Diameter 55 mm Ram Size 340 / 550 mm Table Height from Floor 850 mm Stroke Adjustment 10 / 125 mm Strokes per Minute 50 spm Motor Power 11 kW Motor Speed 1450 RPM Approximate Weight 8,500 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, lebar meja: 900 mm, panjang meja: 1.200 mm, lubang tembus di meja: 260 mm, penyesuaian silinder hidrolik: 150 mm, penyesuaian langkah: 200 mm, Perlengkapan: penghadang cahaya keselamatan, PRODUCTION LOCATION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief of frame and welded parts by vibration - Table parallelism and perpendicularity tolerance in compliance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide mounted on 8 guideways - Slide cushioning with cylinder - Slide, connecting rod, ram nose and similar parts in GS52 cast steel - High strength monoblock crankshaft – 4140 - Bronze bushings inside the connecting rod (Zr14) - Rear flywheel - Equipped with spare bolster plate - Hydraulic overload protection - Motorized table-slide adjustment - Automatic central lubrication system - Pneumatic pedal with latch and dual-hand operation with timer - Digital counter - PLC application and touchscreen – DELTA - Electrical switchgear by SIEMENS-SCHNEIDER - CE compliance (optional) - Finger protection light barriers – SICK, LEUZE - Safety PLC (monitors all electrical systems, valves, dual-hand and pedal controls) – PILZ - Dual-solenoid safety valve – GPA, TOPAIR - Lockable position switch and control panel - Safety block - Protective guards as per CE regulations TYPE: D-TYPE MONOBLOCK FRAME Capacity: 300 Tons Table-Slide Distance: 530 mm Distance Between Side Walls: 1280 mm Iedpjvyr Easfx Afijia Slide Adjustment: 150 mm Approx. Press Width: 1700 mm Approx. Press Depth: 2200 mm Approx. Press Height: 3500 mm Table Hole Diameter: 260 mm Table Size: 900 / 1200 mm Die Clamping Hole Diameter: 60 mm Slide Size: 470 / 900 mm Height from Floor to Table: 1000 mm Stroke Adjustment: 20 / 200 mm Strokes per Minute: 38 spm Motor Power: 30 + 2.2 kW Motor Speed: 1450 RPM Approx. Weight: 18,000 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, lebar meja: 800 mm, panjang meja: 1.070 mm, lubang tembus di meja: 240 mm, penyesuaian silinder hidrolik: 130 mm, penyesuaian langkah: 160 mm, Perlengkapan: penghadang cahaya keselamatan, PRODUCTION LOCATION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel frame construction - Stress relief on the frame and welded parts by vibration - Parallelism and perpendicularity tolerance between tables in compliance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide (ram) supported by 8 guideways - Ram with cushioning cylinder - Parts such as ram, connecting rod, and ram nose made of cast steel, GS52 - High-strength one-piece crankshaft – 4140 - Bearings for connecting rods made of bronze (Zr14) - Rear-mounted flywheel - Spare die table included - Hydraulic safety device - Motorized table-to-ram adjustment - Automatic central lubrication system - Pneumatic pedal with latch and dual-hand control with timer - Electric stroke counter - PLC system with touchscreen – DELTA - Electrical switchgear – SIEMENS-SCHNEIDER - CE compliance – OPTIONAL - Beam-type finger protection light barriers – SICK, LEUZE - Safety PLC (controls the entire electric system, valves, dual-hand and pedal) – PILZ - Dual-coil safety valve – GPA, TOPAIR - Locked position switch and control panel Isdpsvyr Diofx Afijia - Safety block - Protective guards included within CE compliance TYPE: D-TYPE MONOBLOCK FRAME Capacity: 200 Tons Table-to-ram distance: 500 mm Distance between side walls: 1150 mm Ram adjustment: 130 mm Approximate press width: 1500 mm Approximate press depth: 2000 mm Approximate press height: 3200 mm Table hole diameter: 240 mm Table dimensions: 800 x 1070 mm Die clamping slot diameter: 60 mm Ram dimensions: 450 x 800 mm Table height from floor: 950 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approximate weight: 14,000 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, lebar meja: 850 mm, panjang meja: 1.150 mm, lubang tembus di meja: 240 mm, penyesuaian silinder hidrolik: 150 mm, penyesuaian langkah: 160 mm, Perlengkapan: penghadang cahaya keselamatan, PRODUCTION LOCATION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief by vibration applied to main body and welded components - Table parallelism and perpendicularity tolerances conform to ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide guided by 8-way gibs - Ram with cushioning cylinder - Ram, connecting rod, and clutch parts, made of cast steel, GS52 - High-strength monobloc crankshaft – 4140 - Bronze bushings inside connecting rods (Zr14) - Rear flywheel - Spare bolster plate - Hydraulic overload protection - Motorized table-to-ram adjustment - Automatic central lubrication system - Pneumatic pedal with interlock and dual-hand control with timer - Electric counter - PLC control and touchscreen panel – DELTA - Electrical switchgear by SIEMENS-SCHNEIDER - CE conformity – OPTIONAL - Safety light curtains for finger protection – SICK, LEUZE - Safety PLC (controls all electric system, valves, double-hand and pedal) – PILZ - Double-coil safety valve – GPA, TOPAIR - Locked position limit switch and main panel - Safety block - Protective guards in compliance with CE standards Iiodpfsvyr D Ajx Afioa MODEL: D-TYPE MONOBLOCK FRAME Capacity: 250 Ton Shut Height (Ram to Table Distance): 520 mm Clearance Between Side Frames: 1230 mm Ram Adjustment: 150 mm Approximate Width: 1600 mm Approximate Depth: 2100 mm Approximate Height: 3400 mm Table Bore Diameter: 240 mm Table Dimensions: 850 x 1150 mm Die Clamping Slot Diameter: 60 mm Ram Dimensions: 470 x 900 mm Table Height from Floor: 950 mm Stroke Adjustment: 20 – 160 mm Strokes per Minute: 40 spm Main Motor Power: 22 + 2.2 kW Motor Speed: 1450 rpm Approximate Weight: 16,000 kg

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 100 t, lebar meja: 700 mm, panjang meja: 880 mm, tinggi meja: 850 mm, lubang tembus di meja: 200 mm, penyesuaian silinder hidrolik: 85 mm, penyesuaian langkah: 110 mm, Perlengkapan: penghadang cahaya keselamatan, GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief for frame and welded parts via vibration - Table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards - Pneumatic clutch and brake combination – OMPI-Italy - Slide (ram) with 8-way guide - Ram with cushioning cylinder - Steel cast parts for ram, connecting rod, and slide block – GS52 - High strength, solid one-piece crankshaft – 4140 - Bronze connecting rod bearing (Zr14) - Rear flywheel - Spare bolster plate - Hydraulic overload protection - Motorized slide adjustment - Automatic central lubrication - Pneumatic pedal with latch and dual-hand control with time delay - Electrical counter - PLC application with touchscreen – DELTA - Electrical switchgear – SIEMENS-SCHNEIDER - CE compliance – OPTIONAL - Finger protection light barriers – SICK, LEUZE - Safety PLC (controls entire electrical system, valves, double-hand and pedal) – PILZ - Dual coil safety valve – GPA, TOPAIR - Interlock position switch and control panel - Safety block - Protective guards in accordance with CE requirements TYPE D-TYPE MONOBLOCK FRAME Capacity 100 Ton Ijdpfx Aevxhprofieia Distance Between Table and Slide 450 mm Distance Between Side Frames 960 mm Slide Adjustment 85 mm Approximate Width 1230 mm Approximate Depth 1650 mm Approximate Height 2500 mm Bolster Hole Diameter 200 mm Bolster Size 700 / 880 mm Die Fastening Slot Diameter 50 mm Ram Size 245 / 410 mm Bed Height from Floor 850 mm Stroke Adjustment 10 / 110 mm Strokes per Minute 50 spm Motor Power 11 kW Motor Speed 1450 rpm Approximate Weight 7,500 kg

Kondisi: bekas, Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, Daya tekan 3.200 kN Jarak maksimal 450 mm Jarak meja ke ram 600 mm Dimensi meja 1.650 mm x 900 mm Dimensi ram 1.400 mm x 800 mm Langkah dapat diatur 20 mm - 160 mm Penyesuaian ram maks. 100 mm Jumlah langkah 20 - 60 /menit Iijdpfxoyc N Eme Afija Daya penggerak 37 kW Berat mesin ca. 30.000 kg Dengan feeder rol + decoiler Data dan gambar lain tersedia atas permintaan

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 600 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.200 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press that operates with force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety in large table and heavy die applications, thanks to their rigid frame structures. The CRONOSSTECH CEHP 600 – H Type Eccentric Press 600 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its mono-block frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it ensures reliable performance for continuous production conditions. Key advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/equipment protection via hydraulic overload protection - Precise guidance with 8-point guided ram + balancer piston - Controlled, user-friendly operation via PLC + touch screen - High operator safety with light curtain protection Areas of use - Punching/cutting/forming applications requiring large table size Iiedpfxjx N R A Uo Afioa - Mass production with automated feeding lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch brake • T-slotted additional base plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on the ram • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain protection • Gear group in a sealed oil chamber • Double coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety cover for table front • Custom-designed dies as required ✅ TECHNICAL SPECIFICATIONS (CEHP 600) Capacity: 600 Ton Table–Ram Distance: 500 mm Housing Width: 2350 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 3500 mm Press Height: 5200 mm Table Dimension: 2200×1200 mm Ram face size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 90 kW Weight: 77,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales operations are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.200 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press powered by force transmitted through an eccentric mechanism, used in cold forming operations such as punching, cutting, and shaping with dies. H-type (straight-side) eccentric presses provide high stability and process reliability in applications with large tables and heavy dies, owing to their rigid frame construction. The CRONOSSTECH CEHP 500 – H-Type Eccentric Press 500 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it offers dependable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/equipment protection with hydraulic overload safety - Precise guidance provided by 8-point guided ram + balancer piston - Controlled and user-friendly operation via PLC + touchscreen display - Enhanced operator safety through light curtain protection Applications - Punching/cutting/forming processes requiring large tables - Mass production with automated feeding lines - Heavy die and high tonnage manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke with a single connecting rod • Balancer piston on the ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touch LCD screen • Reverse motor function • Hydraulic overload safety device • Motorized ram adjustment • Light curtain protection • Enclosed gear group in oil reservoir • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety cover at the front of the table • Dies manufactured to requested specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Ton Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg ✅ PRODUCTION / SUPPLY NOTE Ijdpfjx N R Ahox Afieia This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 300 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, The eccentric press is a type of mechanical press powered by an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. H type (straight-side) eccentric presses ensure high stability and process safety in large table and heavy die applications thanks to their rigid frame structures. The CRONOSSTECH CEHP 300 – H Type Eccentric Press 300 Ton is engineered for stable operation in high-volume production, with a focus on die protection and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Iedpfxjx N Rxve Afieia Key Advantages - Stable operation with large dies thanks to a 2000×1200 mm table dimension - Die/equipment protection via hydraulic overload safeguard - Precise guidance with 8-point guided ram and balancer piston - Controlled and user-friendly operation with PLC + touch screen - Enhanced operator safety via light curtain protection Application Areas - Punching/cutting/forming applications requiring large table - Series production with automated feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch and brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse motion • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain protection • Enclosed gear set in oil bath • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover for front of table • Dies as per request/specification ✅ TECHNICAL SPECIFICATIONS (CEHP 300) Capacity: 300 Ton Table-Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2750 mm Press Height: 4700 mm Table Dimension: 2000×1200 mm Ram Face Size: 2000×1200 mm Stroke (Fixed): 200 mm Motor Power: 45 kW Weight: 41,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, panjang langkah: 200 mm, lebar meja: 1.100 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, The eccentric press is a type of mechanical press powered by a force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety even with large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 250 – H Type Eccentric Press 250 Ton is engineered for stable operation, die protection, and operator safety in high-volume production. Featuring a monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance for continuous production environments. Key Advantages - Stable operation with large dies due to 2000×1100 mm table size - Die/equipment protection with hydraulic overload safety device - 8-point guided ram + counterbalance piston for precise guidance - Controlled, user-friendly operation with PLC and touchscreen - High operator safety with light curtain protection Application Areas Iisdpfxsx N Rwrs Afija - Punching/cutting/forming operations requiring large table sizes - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel body construction • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-point guided slide • Adjustable stroke via single connecting rod • Counterbalance piston on slide • Fully automatic lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD • Reverse motion motor • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety system • Enclosed oil sump with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover at table front • Custom dies as requested ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 Ton Table-Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2650 mm Press Height: 4600 mm Table Dimension: 2000×1100 mm Ram Face Size: 2000×1100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, panjang langkah: 200 mm, lebar meja: 900 mm, panjang meja: 1.800 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Cam-type Press (Eccentric Press) is a type of mechanical press driven by a force generated through an eccentric mechanism, designed for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety particularly in applications requiring large bolster areas and heavy dies, thanks to their rigid frame construction. CRONOSSTECH H-Type Eccentric Press 150 Tons offers stable operation during high-volume production and is focused on die protection and operator safety. With its monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production environments. Key Advantages Stable operation for large dies with spacious bolster dimensions Die/equipment protection via hydraulic overload protection High-precision guidance with 8-point slide + counterbalance piston Controlled and user-friendly operation with PLC + touch screen Enhanced operator safety with light curtain protection Application Areas Punching/cutting/forming applications requiring large bolster Serial production with automated feeding lines Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame construction • Pneumatic clutch–brake system • Additional T-slotted bolster plate • 8-point guided slide • Adjustable stroke on single connecting rod Iiodpfx Aex N Ru Defioa • Counterbalance piston on slide • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor operation • Hydraulic overload protection • Motorized slide adjustment mechanism • Light curtain protection • Enclosed gear group in oil reservoir • Dual-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover at front of bolster • Dies manufactured as per specifications ✅ TECHNICAL SPECIFICATIONS (H-TYPE – 150 TONS) Capacity: 150 Tons Useful area of lower bolster: 900×1800 mm Useful area of upper plate: 900×1800 mm Fixed stroke: 200 mm Nominal material thickness: 7 mm SPM (Strokes Per Minute): 60 Max. closed die height: 500 mm Min. closed die height: 380 mm Adjustment (slide adjustment): 120 mm Number of connecting rods: 2 units Number of eccentric shafts (cranks): 2 units Safety fuse: Hydraulic Electrical components inside panel: Siemens – Schneider Lubrication system: Automatic Screen / PLC / Inverter: Siemens – Pilz Safety barrier: Leuze Operation mode: 4-position Die memory: 99 sets Mounting: Floor-standing Frame type: Monoblock Motor power: 22 kW Motor speed (RPM): 1450 Approximate machine dimensions (L×W×D): 4500×3000×2000 mm Approximate weight: 20 Tons Note: Please notify us for any changes required in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 200 t, panjang langkah: 200 mm, lebar meja: 1.000 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric Press: This is a type of mechanical press powered by force produced via an eccentric mechanism, used for cold forming operations such as punching, cutting, and forming with dies. H-type (straight-side) eccentric presses provide high stability and process reliability in large bolster and heavy die applications due to their rigid frame design. CRONOSSTECH CEHP 200 – H Type Eccentric Press 200 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With a monoblock frame, eight-point guided slide system, hydraulic overload safety device, and automatic lubrication infrastructure, it delivers reliable performance for continuous production conditions. Key Advantages - Stable operation with large dies due to 1000×2000 mm large bolster - Die/equipment protection with hydraulic overload safety device - Controlled and user-friendly operation via PLC + touchscreen display - Enhanced operator safety with light curtain (LEUZE) - Quick production changeovers with 99 die memory slots Areas of Use - Punching/cutting/forming operations requiring large bolster - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel frame structure • Pneumatic clutch–brake • T-slotted auxiliary plate • Eight-point guided slide • Adjustable stroke on single connecting rod • Slide balancer cylinder • Fully automatic precision lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse movement • Hydraulic overload safety device Iiodpfx Afjx N Ruqoiea • Motorized slide adjustment mechanism • Light curtain safety barrier • Gear group in sealed oil chamber • Double solenoid safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety guard for bolster front • Custom die manufacturing ✅ TECHNICAL SPECIFICATIONS (CEHP 200 – 200 TON) Capacity: 200 Ton (CEHP 200) Lower bolster usable area: 1000×2000 mm Upper bolster usable area: 1000×2000 mm Fixed stroke length: 200 mm Nominal material thickness: 7 mm Strokes per minute (SPM): 25–45 Max closed die height: 600 mm Min closed die height: 480 mm Side window width: 600×600 mm Adjustment (slide): 120 mm Number of connecting rods: 2 Number of eccentric/cranckshafts: 2 Safety device: Hydraulic Electrical equipment (panel): Siemens – Schneider Lubrication system: Automatic Display/PLC/Inverter: Siemens – Pilz Safety barrier: Leuze Operating modes: 4-position Die memory: 99 slots Mounting: Floor-mounted Frame type: Monoblock Motor power: 22 kW (IE3) Motor speed (RPM): 1450 Approx. dimensions (L×W×H): 4600×3000×2000 mm Approximate weight: 28,000 kg Note: If you require any modifications to the technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), gaya penekanan: 300 t, panjang langkah: 200 mm, lebar meja: 700 mm, panjang meja: 1.200 mm, kedalaman tenggorokan: 370 mm, penyesuaian langkah: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, CRONOSSTECH C-Frame Eccentric Press 300 Ton An eccentric press is a type of mechanical press powered by force generated through an eccentric mechanism. It is used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. The CRONOSSTECH C-Frame Eccentric Press 300 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production environments. Key Advantages - Stable stroke performance and high repeatability in serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirement via central automatic lubrication - Production-ready operation with PLC control + two-hand/foot pedal mode Application Areas - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guide • Spheroidal cast iron connecting rod and gear housings • Crankshaft and transmission shafts made from 4140 quenched and tempered steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • Compliant with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger and hand protection system • PLC control system • Two-hand/foot pedal operation system Iodpox N Nfhofx Afijia • Mechanical lock system • Emergency reverse motor function • Compliant with occupational safety regulations • Meets CE standards ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic lock system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as per requested specifications • 8-sided slide guide ✅ TECHNICAL SPECIFICATIONS (300 TON) Capacity: 300 tons Throat depth: 370 mm Table–ram distance: 530 mm Slide–table distance: 650 mm Distance between uprights: 470 mm Ram adjustment (regulation): 150 mm Approx. press width: 2000 mm Approx. press depth: 2700 mm Approx. press height: 3200 mm Front anchoring dimension: 940 mm Side anchoring dimension: 1440 mm Table hole diameter: Ø260 mm Table size: 700×1200 mm Die clamp slot diameter: Ø60 mm Ram size: 780×400 mm Table height from ground: 810 mm Stroke adjustment: 20–200 mm Strokes per minute: 38 spm Motor power: 30 + 2.2 kW Motor speed: 1450 rpm Approx. weight: 13,200 kg Note: Please inform us if you require any modifications in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 22 kW (29,91 hp), gaya penekanan: 250 t, panjang langkah: 160 mm, lebar meja: 700 mm, panjang meja: 1.100 mm, kedalaman tenggorokan: 350 mm, penyesuaian langkah: 150 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, excentric-press; an excentric mechanism-powered type of mechanical press used in cold forming operations such as punching, cutting, and die shaping. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 250 Ton is designed for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in serial production Operator safety-oriented design (light curtain + safety systems) Low maintenance with central automatic lubrication PLC control + dual hand/foot pedal operation for production-ready use Applications Iedpsx N Nfbefx Afieia Cold cutting and punching operations Cold extrusion applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel fabricated frame • Four-point slide guidance • Nodular cast iron connecting rods and gear housings • Crankshaft and transmission shafts made from 4140 tempered steel • Central automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection system • PLC control system • Dual hand/foot pedal operation • Mechanical safety system • Emergency reverse motor function • Occupational safety regulation compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration mounts • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as per request • 8-point slide guidance ✅ TECHNICAL SPECIFICATIONS (250 TON) Capacity: 250 Tons Throat depth: 350 mm Table–ram distance: 520 mm Slide–table distance: 630 mm Distance between side walls: 520 mm Ram adjustment (shut height): 150 mm Approx. press width: 2000 mm Approx. press depth: 2500 mm Approx. press height: 3100 mm Front anchorage size: 930 mm Side anchorage size: 1430 mm Table hole diameter: Ø250 mm Table size: 700×1100 mm Die clamping hole diameter: Ø60 mm Ram size: 670×380 mm Table height from floor: 810 mm Stroke adjustment: 20–160 mm Strokes per minute: 40 spm Motor power: 22 + 2.2 kW Motor speed: 1450 rpm Approximate weight: 12,000 kg Note: Please contact us if you require alterations in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 3 kW (4,08 hp), gaya penekanan: 35 t, panjang langkah: 70 mm, lebar meja: 400 mm, panjang meja: 600 mm, berat keseluruhan: 1.500 kg, gaya punching: 35 t, penyesuaian langkah: 45 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, The eccentric press is a type of mechanical press operating with force generated via an eccentric mechanism and is used in cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it offers an efficient and reliable solution for serial production lines. The CRONOSSTECH C-Type Eccentric Press 35 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction frame, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance requirements via centralized automatic lubrication - Production-ready with PLC control + dual hand/foot control Areas of Application - Cold cutting and punching operations - Cold shearing applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES - Steel construction frame - Four-sided slide guidance - Spheroidal cast iron connecting rod and gear bushings - Crankshaft and transmission shafts made of 4140 tempered steel - Centralized fully automatic grease lubrication system - Pneumatic clutch and brake combination - Conforms to CE safety directives - Dual solenoid safety valve - Manually adjustable stroke - Light curtain hand–finger protection system - PLC control system - Dual hand/foot control system - Mechanical safety interlock - Emergency reverse motor operation - Complies with occupational safety regulations - Meets CE standards ✅ OPTIONAL FEATURES - Anti-vibration pads - Touchscreen LCD panel (standard on 150–300 ton models) - Hydraulic safety system (standard on 200–300 ton models) - Spare bolster plate - Decoiler, feeder, and straightener - One custom die set as specified - Eight-sided gibbing ✅ TECHNICAL SPECIFICATIONS (35 TON) - Capacity: 35 Tons - Usable bed area: 400×600 mm - Stroke range: 0–70 mm - Nominal material thickness: 2.5 mm Isdpfx Afex N Nd Rjieia - Stroke per minute (SPM): 120 - Shut height (bed to slide): 330 mm - Adjustment (ram adjustment): 45 mm - Bed through-hole diameter: Ø130 mm - Slide (ram) die shank diameter: Ø35 mm - Safety interlock: Mechanical lock - Lubrication system: Automatic lubrication - PLC: Yes - Safety light curtain: Yes - Working system: Pneumatic clutch–brake - Mounting method: Floor mounted - Frame type: C-frame steel construction - Motor power: 3 kW - Motor speed (RPM): 1450 - Approximate machine dimensions (L×W×H): 1100×1400×1800 mm - Approximate weight: 1500 kg Note: If you require any changes to the technical specifications, please inform us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed directly by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 15 kW (20,39 hp), gaya penekanan: 200 t, lebar meja: 800 mm, panjang meja: 1.100 mm, gaya punching: 200 t, lubang tembus di meja: 220 mm, diameter silinder: 60 mm, penyesuaian langkah: 180 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are mechanical presses designed for cold forming operations such as punching, cutting, and die forming, operating via a force generated through an eccentric mechanism. Thanks to their high production speed and repeatability, they provide an efficient and reliable solution for serial production lines. CRONOSSTECH C-Type Eccentric Press 200 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch–brake system, and CE-compliant safety infrastructure deliver reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in serial production Operator safety-focused design (light curtain + safety systems) Low maintenance need with centralized automatic lubrication Production-ready use with PLC control + dual-hand/foot control Applications Iiodovtyx Ijpfx Afiea Cold cutting and punching operations Cold shearing applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided slide guide • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts of 4140 tempered steel • Centralized fully-automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directives compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot control system • Mechanical safety lock system • Emergency reverse motor movement • Designed in accordance with work safety regulations • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton) • Hydraulic safety system (standard for 200–300 ton) • Spare bolster plate • Decoiler, feeder, and straightener • 1 die set as per requested specifications • Eight-sided guiding slides ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Table–ram distance: 500 mm Slide–table distance: 600 mm Distance between columns: 510 mm Ram adjustment (setting): 130 mm Approx. press width: 1900 mm Approx. press depth: 2400 mm Approx. press height: 3000 mm Front anchorage: 920 mm Side anchorage: 1420 mm Table hole diameter: Ø240 mm Table size: 680×1000 mm Die clamping hole diameter: Ø60 mm Ram size: 620×350 mm Floor-to-table height: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approx. weight: 9200 kg Note: Please inform us if you require modifications to technical specifications. ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 15 kW (20,39 hp), gaya penekanan: 160 t, lebar meja: 920 mm, panjang meja: 660 mm, kedalaman tenggorokan: 320 mm, gaya punching: 160 t, diameter silinder: 55 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press driven by a force generated through an eccentric mechanism, mainly used for cold forming operations such as punching, cutting, and die forming. Thanks to its high production speed and repeatability, it serves as an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Excentric Press 150 Ton is designed for stable operation in cold forming applications. Its rigid steel body, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance needs with centralized automatic lubrication - Production-ready use with PLC control + dual-hand/foot pedal operation Applications - Cold cutting and punching operations - Cold shearing applications - Metal die forming Iiodpfxovtywde Afisa - High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Four-way guided slide • Nodular cast iron connecting rod and gear housings • Crankshaft and transmission shafts made of 4140 hardened steel • Centralized fully automatic grease lubrication • Pneumatic clutch and brake combination • CE safety directives compliant • Twin-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor motion • Compliant with occupational safety regulations • In line with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare bolster plate • Decoiler, feeder and straightener • 1 custom-designed die set • 8-way slide guiding ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton Throat depth: 320 mm Die–ram distance: 500 mm Slide–table distance: 540 mm Clearance between uprights: 500 mm Ram adjustment (stroke adjustment): 120 mm Approximate press width: 1600 mm Approximate press depth: 2280 mm Approximate press height: 2750 mm Front anchorage: 840 mm Side anchorage: 1300 mm Table hole diameter: Ø220 mm Table size: 660×920 mm Die mounting hole diameter: Ø55 mm Ram size: 600×290 mm Table height from floor: 805 mm Stroke adjustment: 10–125 mm Strokes per minute: 42 spm Motor power: 15 kW Motor speed: 1450 rpm Approximate weight: 7100 kg Note: Please inform us if you require modifications to technical specifications. ✅ PRODUCTION/SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. All sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 130 t, lebar meja: 750 mm, panjang meja: 1.000 mm, gaya punching: 130 t, lubang tembus di meja: 220 mm, diameter silinder: 55 mm, penyesuaian langkah: 140 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, powered by force generated via an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in mass production Operator safety-oriented design (light curtain + safety systems) Low maintenance requirements with centralized automatic lubrication Production-ready operation with PLC control + dual hand/foot control Fields of Application Cold cutting and punching operations Cold breaking applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction body • 4-sided guided ram • Spheroidal graphite cast iron connecting rod and gearboxes • Crankshaft and transmission shafts made from 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • Complies with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • One set of die set as per request • 8-guideway slide system ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Ton Throat depth: 310 mm Table–ram distance: 500 mm Slide–table distance: 510 mm Iiedpfx Afovtyvgjisa Distance between side frames: 450 mm Ram adjustment (stroke setting): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchoring length: 790 mm Side anchoring length: 1250 mm Table hole diameter: Ø210 mm Table size: 630×820 mm Die clamping hole diameter: Ø55 mm Ram size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 SPM Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: If you require changes in technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, lebar meja: 670 mm, panjang meja: 950 mm, gaya punching: 100 t, lubang tembus di meja: 180 mm, diameter silinder: 45 mm, penyesuaian langkah: 120 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are types of mechanical presses powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. Thanks to their high production speed and repeatability, they offer efficient and reliable solutions for mass production lines. The CRONOSSTECH C-Type Excentric Press 100 Ton is designed for stable performance in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suited for serial production. Key Advantages • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance requirement thanks to centralized automatic lubrication • Production-ready use with PLC control + two-hand/foot pedal operation Application Areas • Cold cutting and punching operations • Cold shearing applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel construction body • Slides supported on 4 surfaces • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliance • Dual-coil safety valve • Manually adjustable stroke • Light curtain hand–finger safety protection system • PLC control system • Two-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch-screen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One tooling set upon request • 8-point slide guide ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Iiodpovtx Inefx Afiea Distance between side frames: 420 mm Ram adjustment (stroke adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Bolster hole diameter: Ø200 mm Bolster size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approximate weight: 4650 kg Note: If you require any changes in the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, daya: 5,5 kW (7,48 hp), gaya penekanan: 80 t, lebar meja: 660 mm, panjang meja: 860 mm, gaya punching: 80 t, lubang tembus di meja: 180 mm, penyesuaian langkah: 110 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Eccentric Press: This is a type of mechanical press powered by force generated through an eccentric mechanism used in cold forming operations such as punching, cutting, and die forming. Its high production speed and repeatability make it an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 80 Ton is engineered for stable operation in cold forming applications. The rigid steel frame, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suitable for continuous production. Key Advantages - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance with central automatic lubrication - Production-ready operation with PLC control + dual-hand/foot pedal control Applications Isdpfevtx H Rjx Afisia - Cold cutting and punching operations - Cold blanking applications - Metal die forming - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-sided guided slide • Spheroidal graphite cast iron connecting rod and gear seats • Crankshaft and drive shafts made of 4140 quenched and tempered steel • Fully automatic central grease lubrication system • Pneumatic clutch and brake combination • CE safety compliant • Double coil safety valve • Manually adjustable stroke • Beam barrier finger and hand safety protection system • PLC control system • Dual hand/foot pedal control system • Mechanical locking system • Emergency reverse motor operation • Occupational safety compliant • CE standards compliant ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Coil decoiler, feeder, and straightener • One set of die to spec • Eight-sided slide guidance ✅ TECHNICAL SPECIFICATIONS (80 TON) Capacity: 80 Ton Throat depth: 280 mm Bed–ram distance: 400 mm Slide–bed clearance: 420 mm Distance between side frames: 400 mm Ram adjustment (stroke setting): 85 mm Approx. press width: 1400 mm Approx. press depth: 1735 mm Approx. press height: 2220 mm Front anchor dimension: 670 mm Side anchor dimension: 1040 mm Table hole diameter: Ø190 mm Table dimensions: 540×740 mm Die holding slot diameter: Ø40 mm Ram dimensions: 370×230 mm Table height from floor: 755 mm Stroke adjustment: 10–100 mm Strokes per minute: 45–75 spm Motor power: 7.5 kW Motor speed: 1450 rpm Approx. weight: 4000 kg Note: Please contact us if you require changes in technical specifications. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, TECHNICAL SPECIFICATIONS: Press Model: T65 CNR4 Year of Manufacture: 2002 Nominal Force: 500 kN Weight: 5,000 kg Strokes per minute: 73 Maximum insertions per minute: 36 Operating air pressure min./max.: 4–5.5 BAR Stopping time: 0.154 s Safety distance: 246 mm Energy: 3,440 KJ Adjustable stroke min./max.: 10–120 mm Ram adjustment: 100 mm Top Dead Center high adjustment: 320 mm Maximum extraction stroke: 40 mm Iiedpfx Asx Ura Sofija Worktable surface: 820 x 580 x 68 mm Ram plate size: 470 x 340 mm Distance table to ram: 280 mm Shank diameter: 45 mm Overhang from center: 280 mm Max. die size: 470 x 340 mm Upper die weight: 136 kg Voltage: 400 V Hydraulic overload protection Complete with user manual and CE compliance Mechanical warranty: six (6) months Electrical panel warranty: twelve (12) months NEWLY INSTALLED COMPONENTS: • Motor bearings; • Flywheel bearings; • Swivel joint bearings; • Countershaft bearings; • Clutch plates; • Clutch pins and flanges; • Clutch seals; • Hydraulic overload seal; • Hydraulic overload pipe; • Counterbalancer cylinder seals; • Air pressure gauges; • Front and side protective guards with safety interlocks; • Worktable surface refurbished on CNC machine; • Foot pedal. • Electrical panel with remote support;

Kondisi: baru, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, For sale: JINAOLAN ALP-25V Metal Stamping Press (25T, 2021) Condition: Brand new, never used, in original packaging. We use several of these presses in our factory—the photos show those units. Two units available in stock. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25V Year of manufacture: 2021 A modern, CNC-controlled eccentric press designed for the forming, stamping, and punching of various metal parts. The press is equipped with a high-level operator safety system (Laser Safe), ensuring maximum workplace safety. Technical Specifications: - Nominal Capacity: 25 tons - Stroke rate: 60–140 strokes/min (SPM) - Stroke length: 60 mm - Max. die height: 200 mm - Height adjustment: 50 mm - Slide working area: 470 × 245 mm - Bolster area: 680 × 300 mm - Main motor: 2.2 × 4 kW - Max air pressure: 0.51 MPa - Max die weight: 0.30 t - Control: CNC (programmable control unit) - Safety system: Laser Safe – two-hand start system Application: This press is intended for metal part stamping, punching, bending, and forming. Its CNC control and precise mechanics ensure high productivity, repeatability, and safety. Ideal for small and medium-sized industries, as well as for the production of metal components and formed parts. Advantages: - Brand new, in original packaging - CNC control – precise and user-friendly programming - Laser Safe system – press operates only when both control handles are pressed (two-hand operation safety) Ijdjxniw Sepfx Afioia - Reduces risk of injury, meets high safety standards - Robust construction and stable eccentric drive - 2 brand new presses in stock + several used presses in production If you have any additional questions, feel free to contact us.

Kondisi: baru, Tahun pembuatan: 2022, nomor mesin/kendaraan: EEP-30.22070 A.D, Fungsionalitas: berfungsi sepenuhnya, daya: 4 kW (5,44 hp), tegangan masuk: 380 V, gaya penekanan: 45 t, panjang langkah: 90 mm, lebar meja: 580 mm, panjang meja: 360 mm, tinggi meja: 700 mm, kedalaman tenggorokan: 180 mm, tabel jarak ke piston: 350 mm, panjang total: 1.250 mm, lebar total: 1.500 mm, tinggi total: 2.150 mm, berat keseluruhan: 1.900 kg, sambungan udara terkompresi: 6 batang, lubang tembus di meja: 150 mm, penyesuaian silinder hidrolik: 60 mm, tingkat pukulan (maks.): 145 rpm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, de Iedpfx Afjxq Sbfeisia

Kondisi: bekas, Tahun pembuatan: 1990, PERS EKSENTRIK GIZELIS 150t TEKANAN 150t DIMENSI MEJA 1000x660mm JARAK GERAK 120-220mm DAYA 11 kW DENGAN SISTEM PENJAEP HIDROLIK Iedex N Sr Djpfx Afisia