Beli Mesin frais universal & mesin bor bekas (51)

Kondisi: baik (bekas), Tahun pembuatan: 1995, Fungsionalitas: berfungsi sepenuhnya, Control: SIEMENS 840D Solution Line (Electrical overhaul in 2017) x-travel: 7,000 mm y-travel: 2,100 mm z-travel: 1,500 mm z-travel (spindle in vertical position): 1,200 mm Feed rate X, Y, and Z axes: 2 – 12,000 mm/min Rapid traverse X, Y, and Z axes: 12,000 mm/min Universal Milling Head UFK Spindle speeds: 22 – 2,400 rpm Drive power 100 / 60 duty cycle: 31.5 / 39 kW Max. torque main spindle: 2,200 Nm Swivel range milling head (C-axis): 180° Swivel range milling head (A-axis): 340° Automatic Indexing Chuck PREISELER AWU 650 Year of manufacture: 1995 with vertical three-jaw chuck FORKARDT F630: 630 mm Centre height above table: 500 mm Max. workpiece weight (cantilevered clamping): 2,000 kg Max. workpiece weight (with tailstock): 4,000 kg Tailstock with Hydraulic Quill Quill taper: MK6 Tailstock centre height: 500 mm Clamping Plate Dimensions (LxWxH): 6,000 x 1,500 x 300 mm Max. load: 90 t T-slots: 6 units 28H7 (DIN650) T-slot spacing: 250 mm Coolant System with Paper Band Filter Make: ALLWEILER AG Type: PF 60 DVS / 500 Pedpfx Abexz Ecqo Isrd Pump capacity, at max 3 bar: 40 l/min with return flow unit Equipped with: Automatic indexing chuck with worm gear: PEISLER AWU650 Various roller supports and rests 6 machine clamping tables UK500 Hinged belt conveyor MAYFRAN Type: MT10 Electronic handwheel SIEMENS: SINUMERIK HT2 Milling head design with hydromechanical quick tool clamping Direct non-contact measuring via linear measurement systems Oil circulation lubrication for main gearbox and milling head drive Travelling operator platform in X-direction, safety enclosure with viewing windows The machine is in exceptionally good condition and may be inspected under power. In 2017, a new SIEMENS 840D Solution Line control was installed; at this time, all drive motors and the control cabinet were renewed.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1975, OFFER We can offer you, without obligation and subject to prior sale and errors, the following from stock: DECKEL Universal Tool Milling Machine Podexzk Irjpfx Ab Isrd Model: FP 2 Year of manufacture: approx. 1975 Table travels: longitudinal powered/manual 390 / 400 mm vertical powered/manual 390 / 400 mm cross slide powered/manual 190 / 200 mm Fixed angle table 250 x 700 mm Clearance under spindle 400 mm Spindle overhang approx. 165–465 mm Spindle taper SK 40 18 spindle speeds 40–2,000 rpm Infinitely variable feed rate 5–400 mm/min Rapid traverse 1,200 mm/min Spindle drive 2.2 kW Total connected load 2.5 kW - 380 V - 50 Hz Weight 1,000 kg Accessories / Special Equipment • DECKEL universal swivelling angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and indexing plates • Original DECKEL high-speed vertical milling head with separate drive • Large original DECKEL tool cabinet for storing the above accessories and various arbors, approx. 30 assorted collets, various milling cutters, various arbors, etc., as well as operation tools, etc.; separate control cabinet; coolant system Condition: very good – demonstration ready, ideal for training workshops Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We constantly have further DECKEL FP 1 / FP 2 / FP 4 milling machines as well as accessories such as spiral milling attachments additionally in stock.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1996, Universal tool milling machine KUNZMANN WF 4/3 Equipped with 3-axis Heidenhain digital readout Year of manufacture: 1996 Travel distances: X 400 Y 320 Z 400 Pedpfx Asq Uluceb Ierd Speed range: 40 – 2550 rpm Including the following accessories: Rigid angular table, 800 mm x 360 mm clamping surface Mechanical handwheels for X, Y, Z axes Hydraulic tool clamping Automatic central lubrication pump for X, Y, Z axes Machine lamp 4 machine feet Coolant system Operating manual THE MACHINE WAS USED EXCLUSIVELY FOR APPRENTICE TRAINING!! THE MACHINE IS IN GOOD CONDITION!!

Kondisi: baik (bekas), Halo, Dijual Mesin Frais Universal FY-321. Mesin dalam kondisi baik dan terus beroperasi, dapat dilakukan pengecekan. Podpoxykbiefx Ab Ierd Harga yang tertera pada iklan adalah harga netto, belum termasuk PPN. Mesin dapat dilihat di Starachowice, ul. Kwiatkowskiego 13. Kontak telepon dari pukul 07:00 hingga 16:00.

Kondisi: baru, de-fi-01 Pjdpfeuyibcox Ab Ijrd

Kondisi: baik (bekas), KÖLSCH - Mesin Frais Universal - Mesin frais universal cocok untuk pekerjaan lingkaran sebagian maupun penuh. - Pembuatan pola lubang menggunakan meja bagi terintegrasi dan meja koordinat frais. Dimensi: Pedpsxw H Dzjfx Ab Isrd P x L x T: 1,7 x 1 x 1,9 meter / Berat sekitar 900 kg Kesalahan/kekeliruan entri dapat terjadi.

Kondisi: baru, en-GB: WMD20LV - 230V / 1Ph Drilling capacity steel ----- 20 mm Milling capacity steel ----- 20 mm Face milling ----- 63 mm Motor ----- brushless 750W Spindle speed, stepless ----- 50 - 3000 rpm Spindle travel ----- 50 mm Spindle taper ----- MT2 Worktable ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Throat depth ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 150 KG STANDARD ACCESSORIES * Drill chuck incl. chuck arbor * Digital depth gauge * Digital spindle display * Fine adjustment * Left / right-hand rotation * Milling head swivels 90 degrees left / right Prjdpfxeh S E Sbo Ab Isd * Toolbox with assorted tools OPTION * Base cabinet € 249.00 excl. VAT

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 160 mm, jarak gerak sumbu Z: 340 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 40 rpm, Dear Sir or Madam, We hereby offer a Deckel FP1 milling machine, 3-axis with retrofitted safety devices. This newer generation machine is equipped, among other things, with central lubrication, an electric coolant pump, and a brake motor. Additionally, the control cabinet can be disconnected from the machine in a matter of seconds thanks to Harting connectors. The connection of the safety components to the control cabinet is also made using this connector type, ensuring that ease of handling is maintained. We offer a 12-month warranty on the retrofitted safety devices, which can be supplied for any machine type! The electronic spindle guard is adjustable on several axes and is designed to prevent accidental contact with the spindle as well as hazards from flying chips, coolant, etc. The electronic spindle protection cover is intended to prevent intervention into the rotating shaft stub and tool clamping area. Delivery time: on request Year of manufacture: 1989-1992 Machine number: 2102-xxxx Table: fixed angular table Travels: X 300mm / Y 160mm / Z 340mm Prodpfxjuw Uu Nj Ab Ied Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed rate: infinitely variable, 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet, electronic spindle guard, electronic spindle protection cover Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked and inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can also install further equipment such as safety devices for you - We are happy to arrange shipping and/or installation

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1999, Mesin Frais Universal TOS FNGJ 32 Tampilan digital Heidenhain 3 sumbu Tahun pembuatan: 1999 Perjalanan sumbu: X 600, Y 400, Z 400 mm Rentang putaran: 40 – 2000 rpm Dengan perlengkapan berikut: - Meja sudut tetap, permukaan penjepit 800 x 400 mm - Kepala frais vertikal - Pinol bor yang dapat ditarik keluar Prodpfx Abjxc It Ie Ied - Berbagai dudukan alat SK 40 - Perlengkapan pelindung - Wadah serbuk logam - Lampu mesin - Pompa pelumasan sentral otomatis untuk sumbu X, Y, Z - Sistem pendingin - 4 pcs alas mesin

Kondisi: baik (bekas), Halo, Dijual: Mesin Bor Koordinat & Frais Universal TIPE 6T83-1 Mesin dalam kondisi baik, terus beroperasi dan dapat diperiksa. Harga yang tertera di iklan adalah harga netto, PPN harus ditambahkan. Mesin dapat dilihat di Starachowice, Jl. Kwiatkowskiego 13. Kontak telepon antara pukul 07.00 hingga 16.00. Pjdjxyi Stjpfx Ab Iord

Kondisi: bekas, Tahun pembuatan: 2001, x-Perjalanan 400 mm y-Perjalanan 320 mm z-Perjalanan 450 mm Kontrol Haidenhain TNC 124 Daya utama spindle 3 kW Kecepatan spindle 63-3150 rpm Pemegang alat SK 40 Gerak pinol vertikal 60 mm Kecepatan feeding 5-2000 mm/menit Gerak cepat 2 m/menit Meja kerja: 800x320 mm Perlengkapan pendingin 20 l/menit Kebutuhan daya total 5 kW Predpfsxndahex Ab Isd Berat mesin sekitar 1,7 t Kebutuhan ruang sekitar 2,2x2,4x1,6 m

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 280 mm, jarak gerak sumbu Z: 475 mm, berat keseluruhan: 1.850 kg, panjang meja: 1.100 mm, lebar meja: 250 mm, Kepala spindel: ISO 40 Putaran spindel: 35-1800 RPM (variabel) Perjalanan: X750 Y280 Z475 mm Ukuran meja: 1100 x 250 mm Feed otomatis: X, Y & Z Kecepatan rapat: X, Y & Z Motor: 5 HP Pembacaan digital: Heidenhain Positip 850 (X, Y & Z) Negara asal: Spanyol Ukuran (P x L x T): 1850 x 2100 x 2000 mm Berat: 1850 kg Pedpfx Aboxpfy Eo Ierd Kecepatan variabel dengan pembacaan digital dalam 2 rentang gir, kecepatan feed variabel dengan pembacaan digital, lampu kerja dan pembacaan digital Heidenhain 3-sumbu. Semua mesin kami diuji dan diservis sebelum pengiriman.

Kondisi: baru, WMD45 - ROGI Drilling and Milling Machine Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Table dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Max. distance spindle - table ----- 460 mm Spindle travel ----- 120 mm Head tilting ----- Left / Right 90 Degrees Longitudinal table travel ----- 560 mm Cross table travel ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDES * Drill chuck with arbor ISO30 - B16 * Left / Right switch * Spindle guard * Fine adjustment * 2-speed motor * Drift key * Tapping function * Digital depth stop * CE plug Prsdpfega T Anox Ab Iod OPTIONS * Base cabinet * Milling vice * Milling holder ISO30 + 12 collets in case * Milling cutter set

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with a TNC113 3-axis active control system, renowned for its user-friendly operation. This later model from 1989 features central lubrication, an electric coolant pump, and a machine lamp, among other upgrades. The machine has undergone a comprehensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. As part of the partial overhaul, the following work was carried out: Prsdpepy Eldjfx Ab Isd - Spindle bearings in the milling head replaced - New paintwork - Various standard components renewed, such as handles, oil sight glasses, push-buttons, etc. - Worn parts such as drive belts replaced - Bellows partially renewed - Gibs adjusted - And much more... Availability: Immediately Year of manufacture: 1989 Machine no.: 2102-xxxx Table: Rigid angle table Travel (X/Y/Z): 300mm / 160mm / 340mm Quill Stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed rate: Infinitely variable 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: Coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines undergo a thorough inspection - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine for you - On request, additional accessories such as tools can be ordered directly - On request, we can install additional accessories such as safety devices - We are happy to take care of shipping and/or installation

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1984, Mesin Frais Universal DECKEL FP 3 Dengan tampilan digital aktif 3 sumbu Heidenhain TNC 11 Tahun pembuatan: 1984 Perjalanan sumbu: X 500, Y 300, Z 400 mm Rentang putaran: 25 – 2500 rpm Dengan perlengkapan berikut: Meja sudut tetap 850 mm x 400 mm area penjepitan Meja putar berputar Ø 450 mm dengan cakram pembagi Kepala slotting Kepala milling vertikal yang dapat digeser Kepala bor yang dapat ditarik keluar Feed kontinu melalui potentiometer Berbagai arbor frais SK 40 / S22 x 2 Wadah serpihan Pompa pelumasan sentral otomatis untuk sumbu X, Y, Z Lampu mesin Sistem pendingin 4 buah alas mesin Petunjuk pengoperasian Prodpfx Aoxuh Rdob Ijd

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 2.900 rpm, kecepatan spindel (min.): 100 rpm, tinggi total: 1.700 mm, panjang total: 1.000 mm, lebar total: 750 mm, kecepatan rotasi (maks.): 2.900 rpm, kecepatan rotasi (min.): 100 rpm, penjepit spindle: MK 3, jenis arus masuk: tiga fasa, berat keseluruhan: 260 kg, panjang meja: 560 mm, lebar meja: 250 mm, Motor 3 Fase 380V, 2 kecepatan, berjalan dengan baik! RPM spindel dapat diatur dari 100 hingga 2900. Kepala bertransmisi roda gigi. Kedalaman pengeboran 115mm. Intake spindel MT3. Kepala dapat disesuaikan ketinggian dan sudutnya. Pompa pendingin pada dasar mesin. Meja silang dalam kondisi baik. Dimensi meja: 560x250mm. Dibuat di Swedia! Dimensi keseluruhan: 100x75x170 cm. Termasuk semua aksesori yang terlihat pada gambar. Prjdpfx Asxnvrvsb Ijd Hubungi kami untuk kemungkinan pengiriman! € 2.800,00 EX PPN!

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Travel (X): 450 mm Travel (Y): 200 mm Travel (Z): 465 mm Total power requirement: 2.6 kW Machine weight approx.: 1.2 t O F F E R We can offer you from stock, subject to prior sale and errors, without obligation: KUNZMANN Universal Tool Milling Machine with HEIDENHAIN 3-axis digital readout Model UF6N Year of manufacture: 1983 Serial No.: 18625 _____ Table travels: longitudinal motorized / manual 450 / 440 mm vertical manual 400 mm Milling slide cross travel manual 200 mm Fixed angle table 860 x 240 mm Clearance under spindle 50 - 700 mm Spindle taper SK 30 / MT4 18 spindle speeds 30 – 1,275 rpm Feed infinitely variable in 12 steps 13 – 328 mm/min Rapid traverse 1,000 mm/min Spindle drive 2.6 kW Total drive 2.6 kW - 380 V - 50 Hz Space requirement 1.40 x 1.90 x 1.70 m Weight 1,200 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout with extended functions, absolute measurement, mm/inch switching, etc. • Swiveling universal vertical milling head, tiltable +/- 45° • Large, fixed table, 860 x 240 mm, installed • Coolant device, chip tray, central lubrication, operating instructions Prodexdnplepfx Ab Ied • Integrated work light Condition: Very well maintained! Ideal machine for (training) workshops or small batch production!! Please click here for a video of the machine: UF6N/4 Delivery: Ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice We always have a large selection of conventional and CNC milling machines in stock. Please contact us!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 500 mm, kecepatan spindel (maks.): 1.200 rpm, kecepatan spindel (min.): 8 rpm, berat keseluruhan: 3.850 kg, Tirus spindle: ISO 40 RPM: 8-1200. Pergerakan: X1500 Y700 Z500 mm. Psdexn R U Sopfx Ab Iord Ukuran meja: 2000 x 420 mm. Feed otomatis: X, Y & Z. Kecepatan cepat: X, Y & Z. Negara asal: Prancis. Ukuran (P x L x T): 2000 x 2200 x 1700 mm. Berat: 3.850 kg. Kecepatan cepat dan feed otomatis di X, Y & Z. Termasuk ragum. Seluruh mesin kami diuji dan diservis sebelum pengiriman.

Kondisi: baru, WMD25LV - 230V / 1Ph Drilling capacity in steel ----- 25 mm Milling capacity in steel ----- 20 mm Face milling capacity ----- 63 mm Motor ----- Brushless 750W Spindle speed infinitely variable 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle taper ----- MT3 Worktable ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Throat ----- 170 mm Distance spindle - table ----- 325 mm Weight ----- 160 KG Podpfega T Eijx Ab Iord STANDARD ACCESSORIES * Drill chuck incl. holder * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right rotation switch * Milling head rotatable left / right 90 degrees * Toolbox with various tools OPTION * Base cabinet € 249.00 excl. VAT

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 4.000 mm, panjang umpan sumbu Y: 1.000 mm, panjang umpan sumbu Z: 1.500 mm, kecepatan pemakanan sumbu X: 15.000 m/menit, laju pemakanan gandar Y: 15.000 m/menit, laju pemakanan sumbu Z: 15.000 m/menit, kecepatan spindel (maks.): 3.000 rpm, panjang meja: 4.000 mm, lebar meja: 1.000 mm, CNC ECS 2301 (with possible retrofit upgrade) SPINDLE ISO 50 DIN 2080 taper AC motor, 28 kW (S1/100%) Constant torque from 0 to 250 rpm Constant power from 250 to 3,000 rpm Two automatic speed ranges TABLE (X axis) Length: 4,000 mm Width: 1,000 mm Travel: 4,000 mm Number of T-slots: 7 T-slot width: 18 mm Working feed: 0 – 8,000 mm/min Rapid traverse: 15,000 mm/min Predow Axmnopfx Ab Iod HEADSTOCK (RAM, Y axis) Y axis travel: 1,000 mm Working feed: 0 – 8,000 mm/min Rapid traverse: 15,000 mm/min VERTICAL SLIDE (Z axis) Z axis travel: 1,500 mm Working feed: 0 – 8,000 mm/min Rapid traverse: 15,000 mm/min COLUMN (W axis) W axis travel: 1,300 mm Working feed: 0 – 8,000 mm/min Rapid traverse: 15,000 mm/min ACCESSORIES: 40-position tool magazine

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 350 mm, jarak pergerakan sumbu X: 6.500 mm, pergerakan cepat sumbu Z: 350 m/menit, kecepatan spindel (maks.): 24.000 rpm, kecepatan spindel (min.): 1.000 rpm, berat keseluruhan: 4.500 kg, jangkauan kerja: 6.500 mm, daya motor spindle: 7 W, Schlagzeilen-Optionen: - Steigern Sie Ihre Produktion mit dem überholten NEXUS REV 8000 4-Achs CNC-Bearbeitungszentrum! - Präzision & Leistung: Die ultimative 4-Achs CNC-Lösung für Aluminium-Türen und -Fenster - Effizienz auf höchstem Niveau: Hochgeschwindigkeits-Doppelstationen-Bearbeitungszentrum Schlüsselpunkte (Kurz & Prägnant): - 4-Achs CNC-Power: Bearbeiten Sie komplexe Profile von oben und aus allen Winkeln (±90°) mit höchster Präzision. - Hochgeschwindigkeitsspindel: 7,5 kW Spindel für 24.000 U/min – schnelle, saubere Schnitte auch bei dicksten Profilen. - Doppelstations-Design: Zwei unabhängige 6,5-Meter-Arbeitsbereiche ermöglichen unterbrechungsfreie Produktivität – während ein Profil bearbeitet wird, kann das nächste bereits eingerichtet werden. - Außergewöhnliche Genauigkeit: Das fortschrittliche Portalsystem mit Doppelservoantrieb garantiert perfekte Ausrichtung und vibrationsfreien Betrieb. Prjdpfxjxfqg Ne Ab Ied - Intelligentes Werkzeugmanagement: 8-fach Werkzeugwechsler – für alles von Fräsern ab 1 mm bis zu 300-mm-Scheibenfräsern. - Plug-and-Play Software: Inklusive UNILINK CAD-CAM Software vereinfacht die Bedienung – vom Entwurf (DXF) bis zum fertigen Teil inkl. automatischer Werkzeug- und Spannmittelverwaltung. - Rundum überholt & garantiert: Komplett von NEXUS TECHNICA-Experten revidiert, 6 Monate Garantie und umfassende zukünftige Unterstützung. Technische Highlights für die Anzeige: Verfahrwege (X, Y, Z): 6.500 mm x 350 mm x 350 mm (Doppelstation) Spindel: 7,5 kW, 24.000 U/min Steuerung: Moderne CNC mit beweglichem Bedienterminal (PC, Tastatur, Maus inklusive) Werkzeugmagazin: 8 Plätze (auch für große Scheibenfräser) Spannung: 10 manuell positionierbare pneumatische Spannvorrichtungen (automatische Positionierung optional) Software: UNILINK 3D CAD-CAM Software Zustand: Fachmännisch überholt und modernisiert. Ideal für: - Hersteller von Aluminiumfenstern, Türen und Schiebesystemen - Unternehmen, die mit langen Aluminiumprofilen arbeiten - Betriebe, die automatisieren und Kapazitäten steigern möchten Handlungsaufforderung: Bereit, Ihre Profilbearbeitung zu revolutionieren? Kontaktieren Sie uns noch heute für weitere Informationen oder zur Terminvereinbarung einer Besichtigung!

Kondisi: bekas, Tahun pembuatan: 1982, nomor mesin/kendaraan: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Year of manufacture: 1982, 2 gearbox speeds 1400/2800 rpm Table size: 860 x 240 mm, 3 T-slots 14 mm, spindle taper SK30 Travel distances (X/Y/Z): 450/200/430 mm, horizontal speeds: 18 steps from 32 to 1342 rpm, vertical speeds: 18 steps from 72 to 2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overhead support arbor brackets, 1 collet chuck with key, 1 machine vice with handle. Prsdsiqkc Ispfx Ab Isd

Kondisi: bekas, Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 330 mm, jarak gerak sumbu Z: 475 mm, kecepatan spindel (maks.): 1.800 rpm, kecepatan spindel (min.): 35 rpm, berat keseluruhan: 2.600 kg, panjang meja: 1.525 mm, lebar meja: 325 mm, Tirus spindel: ISO 50 RPM: 35-1800 variabel. Perjalanan: X1050 Y330 Z475 mm. Ukuran meja: 1525 x 325 mm. Feed otomatis: X, Y & Z. Gerakan cepat: X, Y & Z. Motor: 5,5 kW. Pembacaan digital: Fagor Innova (Z). Tahun: 2002 Negara asal: Spanyol. Ukuran (P x L x T): 2400 x 2500 x 2200 mm. Berat: 2600 kg. Prjdpfx Aoxn R Tnsb Ijd Kecepatan variabel dengan 2 gigi. Semua mesin kami diuji dan diservis sebelum pengiriman.

Kondisi: baru, WMD30LV - 230V / 1Ph Drilling capacity in steel ----- 32 mm Milling capacity in steel ----- 20 mm Face milling ----- 76 mm Motor ----- brushless 1.5 kW Spindle speed, variable ----- 50 - 3000 rpm Quill travel ----- 70 mm Spindle taper ----- ISO 30 Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal travel ----- 565 mm T-slots ----- 3x14 mm Throat ----- 240 mm Distance spindle - table ----- 470 mm Weight ----- 230 kg STANDARD ACCESSORIES * Drill chuck incl. drill holder * Digital depth stop * Digital spindle readout * Fine adjustment * Left / Right rotation selection * Milling head rotatable 90 degrees left / right * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed Psdega T Agepfx Ab Ijrd * Milling vice * ISO30 collet holder & 12 collets in case * Milling cutter set

Kondisi: baru, WMD45A ROGI Drilling and Milling Machine VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Longitudinal travel ----- 560 mm Cross travel ----- 230 mm Speed range 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDES * 3-axis digital readout, brand SINO Prjdpsga Tyzofx Ab Iod * Automatic longitudinal feed of the worktable * Drill chuck with arbor ISO30 - B16 * Left / Right switch * Spindle guard * Fine adjustment * 2-speed motor * Drift key * LED work lamp * Coolant system * Tapping function * Digital depth stop * Milling head electrically height-adjustable * Various tools in case