Beli Demag Pk1L bekas (670)

Kondisi: bekas, Telfer rantai listrik DEMAG Tipe DKM 1-80 K V2 F4 Manulift No. Seri: 63158144 Tahun produksi: 2000 Kapasitas angkat: 80 kg Jarak gerak kait: 3 meter Kecepatan pengangkatan: 14 m/menit Kecepatan pengangkatan halus: 3,5 m/menit Daya motor: 0,34 / 0,09 kW Nodpfx Aozd Hi Djn Ujdc Tegangan listrik: 400 Volt, 50 Hz 1 strand beban = 80 kg Kontrol manual Manulift langsung di kait kerekan Berat: 18 kg Kondisi baik

Kondisi: baik (bekas), Tahun pembuatan: 1994, de-001 Ndedpjy Dgmlefx An Uec

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, DEMAG System 1500/1500-16000 Injection Moulding Machine Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Platen dimensions (horizontal × vertical): 2,150 × 1,880 mm Tie bar spacing (horizontal × vertical): 1,500 × 1,250 mm Minimum mould height: 700 mm Maximum mould height: 1,400 mm Maximum opening stroke: 2,900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1,454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Machine Dimensions and Weight Net weight of machine: 74 t Weight of control cabinet: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring plate 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod (BS) with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional Energy Saving System ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves the energy efficiency of hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor by using a frequency converter, adjusting the motor’s rotational speed according to the machine’s actual requirements during the production cycle. As a result, electrical energy is consumed only when it is truly needed. Key Benefits - Reduction in electrical energy consumption by up to 30% - Servo drive technology for the hydraulic pump - World-class, proven technology used in the plastics processing industry - Reduction of energy losses during machine idle times - Lower heating of the hydraulic system - Extended service life of the motor and hydraulic components - Possible retrofitting to existing hydraulic injection moulding machines The ESS system allows for significant reduction of operating costs while maintaining full production parameters. Nsdpfxjyugalo An Ujdc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, DEMAG System 800/1120-9500 Injection Moulding Machine Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of Manufacture: 2008 Clamping Unit Clamping Force: 8,000 kN Tie Bar Distance (horizontal × vertical): 1120 × 1000 mm Platen Size (horizontal × vertical): 1620 × 1500 mm Minimum Mold Height: 500 mm Maximum Mold Height: 1050 mm Maximum Distance Between Platens: 2080 mm Maximum Mold Weight: 7,200 kg Opening Stroke: 1,030 mm Ejector Stroke: 350 mm Ejector Force: 139 kN Injection Unit Screw Diameter: 130 mm Njdpfoyugctjx An Ujdc Shot Volume: 7,300 cm³ Shot Weight (PS): 6,640 g Maximum Injection Pressure: 1,300 bar Screw L/D Ratio: 20 L/D Electro-Hydraulic Equipment Pump Motor Rated Power: 110 kW Heater Power: 79 kW Hydraulic Oil Tank Capacity: 1,300 l Machine Dimensions and Weight Machine Dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine Weight: 33,500 kg Control Cabinet Weight: 9,700 kg Optional ESS (Energy Saving System) The machine can be equipped with a modern ESS servo drive system that increases the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor via a frequency inverter, which adjusts the motor speed to the actual demand during the production cycle. As a result, electric power is consumed only when the machine requires it. Main Benefits - Reduction of electric energy consumption by up to 30% - Servo-driven hydraulic pump technology - World-class, proven technology used in plastics processing industry - Reduction of energy losses during idle operation - Lower heating of the hydraulic system - Extended service life of hydraulic components - Possibility of installation in existing hydraulic injection moulding machines The ESS system allows for significant reduction of operating costs while maintaining full production parameters.

Kondisi: sangat baik (bekas), Blok kait, kait crane, kait beban, kait tunggal, blok bawah, tudung katrol tali kawat, set tudung katrol tali kawat -Pabrikan: Demag, set tudung katrol tali kawat baru, segel pabrikan -Tipe: 2/1 2m No.: 82930533 -Tutup: Ukuran 450 x 450 mm -Jumlah: tersedia 2 set -Harga: per set -Dimensi pengiriman: 460/460/T120 mm Ndodpfszhtadox An Uoc -Berat: 11,5 kg/set

Kondisi: sangat baik (bekas), Trolley manual, trolley bergulir, trolley crane, trolley lintasan, trolley girder crane, trolley crane, trolley lintasan, trolley girder, trolley suspended, trolley berjalan, rangka, trolley monorel -Pabrikan: Demag, trolley berjalan tipe RU 3 DK Ovp No.: 83970144 -Daya angkat: 450 kg -Ukuran: lihat foto -Jumlah: 1x trolley berjalan tersedia -Ukuran kemasan: 225/190/T85 mm -Berat: 2,8 kg Njdpfx Aezhtmksn Uedc

Kondisi: bekas, Takal listrik rantai, angkat listrik, crane DEMAG Tipe PK 2 N Nodpfsy E T Dmex An Uedc No. seri: 2033985 Tahun pembuatan: 1973 Kapasitas angkat: 500 kg Tinggi pengangkatan kait: 15 meter Kecepatan angkat: 5 m/menit - 2 rangkaian beban kondisi baik

Kondisi: baik (bekas), kranfernbedienung-23001 Ndjdpfx Anjxzqghs Ujc

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 13 kW (17,68 hp), kecepatan rotasi (maks.): 955 rpm, KBA160 B-6 Kondisi: Telah direkondisi sepenuhnya / harga berdasarkan permintaan Rem: Tipe konis berat ED: 40% 13 kW 36 A 955 1/menit Model poros panjang 380 / 50 Hz Njdpfjzqtd Uox An Ujdc

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, jam operasional: 3.548 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, berat injeksi: 294 g, berat keseluruhan: 6.983 kg, Hydraulic injection moulding machine from 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar spacing of 520 mm. The machine is equipped with an injection unit with screw diameters of 40 mm, 45 mm, and 50 mm, and a maximum shot weight of 313 g. If you are looking for high-quality injection moulding machines, consider the SUMITOMO SHI DEMAG Systec 160/520-600 unit we have for sale. Contact us for further details. • Tie bar spacing: 520 mm • Injection unit: 600 • Control system: S-Dias • Screw diameter: 45 mm • Injection pressure: 1914 bar • Shot volume: 294 cm³ • Shot weight (PS): 254 g • Injection stroke: 469 mm • Installed heating capacity: 11.3 kW • Oil tank capacity: 290 l • Pump drive power: 25 / 45 kW • Noise level: 69 dB(A) • Dimensions: 5.6 x 2.1 m • Main electrical connection: 3/400 V, 50 Hz, 167 A • Maximum pressure: 190 bar • Platen size: 770 x 770 mm • Maximum mould weight: 1,300 kg Nodpjzbh Epofx An Uodc • Maximum opening stroke: 500 mm • Min/Max mould height: 275 / 685 mm • Distance between platens: 1085 / 1185 mm

Kondisi: baik (bekas), Tali winch, tali derek, tali angkat, kawat baja, tali baja tahan karat, tali winch kehutanan - Tali derek: Tali baja Demag Ø 7,5 mm - Panjang: 38,0 m - Spesifikasi: 7,5 mm – 8x19 SES, 581 690 44 Ndedpfx Anjzh Ehmj Uec - Tipe tali: kawat baja 8 × 19 + SES (SZ) - Tersedia juga tali derek lainnya - Dimensi pengiriman: Ø 500 x 60 mm - Berat: 9,5 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, nomor mesin/kendaraan: WIL134, Demag EPKE overhead crane, portal crane, bridge crane incl. steel structure + floor control Dimensions of steel structure approx. length 44m x 11.2m width with 1x bridge crane 2500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/lifting capacity 2.5t - 2500kg Technical data of the system: Crane runway/steel construction made of HEA/HEB180/240 beams, running rails HEB280 Length outer edge of steel structure approx. 44m Overall width (outer edge, steel structure) approx. 11.2m Total crane height approx. 5.2m Top of running rail approx. 4.87m Bottom of running rail approx. 4.59m Top of bridge approx. 4.52m Bottom of bridge approx. 4.83m Hook height approx. 4.3m Track gauge approx. 10.8m Nsdpfx Ajw Ixz Uon Ujdc Distance between supports: forthcoming Some supports are partially embedded in concrete and will be cut off 5cm below floor level! System is supplied complete: Steel structure complete incl. conductor rail 1x bridge incl. travel drives and Demag DR hoist 2.5t SWL Crane is dismantled and available immediately Location of item: 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarding or collection by appointment only

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Crane tiang berputar, crane hall, crane stasiun kerja -Pabrikan: Demag, crane tiang berputar dengan kapasitas angkat 125 kg -Plat dasar: 350 x 350 mm Ndedpfx Aexmi R Ajn Ujc -Jangkauan: 2.000 mm -Tinggi total: 1.780 mm -Tinggi kait: 840 mm -Katrol rantai: DEMAG tipe DC-Com 1 125 1/1 H4 V8/2 -Angkat utama: 8,0 m/menit -Angkat halus: 2,0 m/menit -Dimensi transportasi: 540/2100/T500 mm -Berat sendiri: 176 kg

Kondisi: baik (bekas), Tahun pembuatan: 2005, 18565 Manufacturer: DEMAG Model: 150-610, System NC4 Year of manufacture: 2005 Clamping Unit Clamping force: 150 tons Opening stroke: 500 mm Tie bar spacing (H x V): 500 x 500 mm Minimum mold height: 250 mm Daylight: 750 mm Ndsdpfexhfuaox An Usc Platen size (H x V): 750 x 750 mm Injection Unit Screw diameter: 45 mm Shot volume: 323 cm³ Shot weight (PS): 290 g Injection pressure: 1,973 bar Dimensions and Weight Machine dimensions (LxWxH): 5.45 x 1.63 x 2.1 m Machine weight: 7,500 kg Robot Brand: Wittmann Model: W721-0231 Year of manufacture: 2005 Additional Information: The hydraulic injection moulding machine from the Demag Ergotech System series is a suitable plastic injection moulding machine for technical plastic components as well as automated series production. Thanks to its hydraulic operating system, the machine provides powerful and stable injection performance, while the Demag NC4 control system enables precise process management. The machine comes equipped with a Demag (Wittmann) DR721 linear robot. Robot specifications: Year: 2005 X-axis: 550 mm Y-axis: 1,000 mm Z-axis: 2,000 mm The robotic system enables fully automated part removal, conveyor belt transfer, and automated series production. In addition, 2 complete spare plasticizing/injection units (screw and cylinder assembly) are included. The machine was in full production use and operated without malfunctions until it was decommissioned.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, kapasitas angkut: 1.000 kg, tinggi angkat: 5.000 mm, Pengangkat Rantai Elektrik DEMAG DKUN10-1000 K V1 Kapasitas angkat 1000kg 2/1 Ndsdpfxev Uvn Io An Usc Jarak pergerakan kait 5m Tahun pembuatan 2006 tanpa silinder kontrol, selain itu lengkap kondisi sangat baik berbagai pengangkat rantai elektrik tersedia kondisi baik Informasi: 20.000 suku cadang dan komponen DEMAG tersedia! gudang suku cadang Demag

Kondisi: baik (bekas), Kranflasche, kait kran, kait beban, kait tunggal, kait bawah, penutup katrol tali kawat - Produsen: Demag, set penutup katrol tali kawat Ndjdpsxd Th Tjfx An Ujc - Tipe: sayangnya tanpa penanda tipe - Lubang: Ø 50 mm - Jumlah: tersedia 2 set - Harga: per set - Dimensi transportasi: Ø 278 x 60 mm - Berat: 2,8 kg

Kondisi: baik (bekas), Tahun pembuatan: 1979, Overhead crane, manufacturer: DEMAG, type: EKKE, year of manufacture: 1979 Nodpfx Anjh Uqbfs Uedc Lifting capacity: 7,500 kg Span: 7,500 mm Hook height: 5,500 mm Complete with DEMAG travel motors and hoist mechanism Crane documentation and inspection reports, plans available Including 20 meters of power rail.

Tahun pembuatan: 1972, Kondisi: bekas, Electric chain hoist, crane, indoor crane, assembly crane, manual trolley, geared trolley, crane trolley, trolley drive, crane drive unit, traveling trolley -Manufacturer: Demag, electric chain hoist with trolley -Type: PK1N, load capacity 250 kg -Main lifting speed: 4 m/min -Fine lifting speed: 2 m/min Ndodpfxerfztlo An Ujc -Transport dimensions: 600/500/H230 mm -Weight: 23 kg

Tahun pembuatan: 1974, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: Si12,5, Demag P625 H13 4/1 wire rope hoist lifting unit crane overhead crane bridge crane - load capacity 12,500 kg (12.5 t) 380V 16A, lifting height 6.5 m, 4-fall (two lifting speeds - 0.5 - 5 m/min) Lifting unit has been fully overhauled by Erich Schäfer As new condition Nedpfjupw Aljx An Uedc Fully functional Collection in 75053 Gondelsheim, forklift available for loading Shipment by freight carrier possible, please inquire with your postal code

Kondisi: bekas, Overhead crane runway crane system made from aluminum system profiles similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA Not DEMAG, but similar to KBK Two-rail suspension track with single-girder crane bridge Light crane system constructed from aluminum system profiles Load capacity: 125 kg Span: 3.2 meters as single-girder bridge Nsdpfeuch Rfjx An Uedc Profile height: 155 mm Profile width: 100 mm - Profiles made from natural color anodized aluminum - Trolleys equipped with low-noise plastic rollers - Power supply via festoon cable on wire rope Comprising: 2 pcs. 4.8 meter aluminum system profiles for the longitudinal running rails, each with 3 suspension eyes 1 pc. 3.35 meter aluminum system profile for the cross traverse (single-girder bridge) with 2 suspension eyes 1 pc. trolley for crane suspension on the cross traverse 1 pc. trolley on the longitudinal traverses (2 pcs.) 6 pcs. end caps suitable for the profile rails Weight of profile rails: 125 kg Very good, as-new condition You can find hoists in our webshop under the keyword "chain hoist." Matching installation material is available in our webshop under the keyword "KBK."

Kondisi: baik (bekas), ts1 Ndodpfxsn H Etfs An Uec

Tahun pembuatan: 1992, Kondisi: hampir baru (bekas), nomor mesin/kendaraan: Div1, Demag KBK 1 column-mounted slewing crane NL 125KG with chain hoist Technical Specifications: Ndodpfxeng H T Uo An Uec Payload at full outreach: 125KG / 0.125t Height: approx. 3.5m Underside of jib: approx. 3m Jib outreach: approx. 4m Hook height: approx. 2.55m Total weight: approx. 450Kg Fitted either with steel or Demag chain hoist 125Kg, depending on stock Including pins, cable trolley, travelling gear, end cap, etc. Multiple cranes in stock Slewing range: 300°, 400V 16A connection Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, load capacities from 80 to 5000Kg, please enquire See pictures Shipping via freight forwarder or collection by appointment only

Kondisi: bekas, Friction wheel, running wheel, bridge crane, indoor crane, assembly crane, workstation crane -Friction wheel drive for: Demag crane -Running wheel diameter: 270 mm -Running wheel width: 90 mm -Quantity: 2 units available -Price: per unit -Dimensions: 390/120/H290 mm Njdpfx Aec Nlyujn Uedc -Weight: 38 kg/unit

Kondisi: bekas, Gear motor, electric motor, three-phase motor - Power: 0.55 kW - Speed: 110 rpm - Shaft: Ø 20 mm - Design: B5 flange, angular - Protection class: IP 54 - Quantity: 1 motor available - Price: per unit - Dimensions: 450/270/H175 mm Nedpoc Uz Huefx An Uodc - Weight: 20 kg

Kondisi: bekas, Electric motor, three-phase motor - Power: 0.37 kW Njdpfx Aedff Nbon Ujdc - Speed: 705 rpm - Shaft diameter: 24 mm - Design: B5 - Protection class: IP 54 - Price: per unit - Quantity available: 5 pcs - Dimensions: 290/170/H205 mm - Weight: 13 kg