Beli Expert International Gmbh Potong Ahli Variojet Dengan 2 Jembatan bekas (110.055)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, posisi kepala milling: mittig, kecepatan spindel (maks.): 60.000 rpm, tinggi total: 1.550 mm, panjang total: 1.870 mm, lebar total: 1.040 mm, kecepatan rotasi (maks.): 60.000 rpm, jenis arus masuk: tiga fasa, berat keseluruhan: 560 kg, jangkauan kerja: 420 mm, masa garansi: 12 bulan, jenis penggerak: Linearmotor, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Semi-automatic depaneling / base unit with parallel shuttle The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the increasing demands of modern production processes. PCB panels of various materials are separated by cutting and routing techniques that minimize dust and mechanical stress, ensuring maximum product flexibility, precision, and throughput. High-dynamic linear motor axes, tools, and grippers fulfill the highest quality requirements, guaranteeing the depaneling machine exceptional durability and reliability. Semi-automatic depaneling – tailored solutions The LOW 4322 depaneler allows for rapid product changeover while maintaining short cycle and handling times. PCBs are loaded using a parallel shuttle; placement and securing are achieved via pin clamping technology, combined with vacuum suction units when necessary. Made in Germany The machine is equipped with: • Shaft and disc tool separation module mounted on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measurement system • Dual loading module configured as a parallel shuttle, left and right separated with sliding doors • Profile frame with two maintenance doors – left and right, ESD-compliant • Standard vision system base module for teach-in programming • Working area: 420 x 330 mm per side • Automatic milling bit length offset management • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Milling bit breakage detection (shaft milling bits only) • Ready for vacuum clamping technology Crjdpfx Aisxt Dk Reuoc • Disc and sliding doors are ESD-compliant Optional: A dust extraction unit can be retrofitted on request.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Automatic glazing bead saw GLSP-200N-AV Pneumatic automatic saw feed Vertical clamping device Adjustable table height 2 x 45° fixed motors Accessories: TCT saw blade 200 x 2.2 x 32mm, Z=100 HSS saw blade 103 x 2.1 x 32mm, Z=60/45° left HSS saw blade 103 x 2.1 x 32mm, Z=60/45° right Glazing bead simulation system Crjdsuydgjpfx Aiuoc With feed cylinder, 1 turret stop With 16 stops and 4 clamping cylinders Counter profiles for 2 glazing beads, support and web width adjustable With extraction port D=80mm.

Kondisi: bekas, Tahun pembuatan: 2007, The approximate machine weight is 290 kg. Crjdpfx Aowf Rg Ejiuoc Required space: approx. 1050 x 560 x 840 mm. The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In operation, the SHARC process results in higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the heat-affected zones, and, where applicable, omission of filler materials). Technical specifications: - Welding current type: DC - Mains voltage (50/60 Hz): 400 V - Phases: 3 - Adjustment range: 10 - 320 A - Adjustment range electrode: 25 - 280 A - Welding voltage: 22 V - Open circuit voltage without HF: 70 V - Open circuit voltage with HF: 90 V - Primary power: 23 kVA - Duty cycle at 60%: 320 A - Duty cycle at 100%: 260 A - Cooling type: F - Protection class: IP 23

Kondisi: bekas, Tahun pembuatan: 2007, Approximate machine weight: 290 kg Space required: approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) as well as for both direct and alternating current welding (AC/DC version), based on an innovative arc forming process developed by Hermann GmbH. In practical use, the SHARC process delivers higher welding speeds while simultaneously improving seam quality and reducing welding ancillary costs (such as less distortion, improved penetration, minimized discoloration of the workpiece, reduced hardening of the transition zones, and, if needed, dispensing with filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle at 60%: 320 Duty cycle at 100%: 260 Crjdpswf Rgxefx Aiuoc Cooling type: F Protection class: IP 23

Kondisi: bekas, Tahun pembuatan: 2007, en-001 Crodewf Rgrepfx Aiuec

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, warna: abu-abu, berat keseluruhan: 800 kg, lebar ruang muat: 2.400 mm, panjang ruang muatan: 4.000 mm, tinggi ruang muatan: 2.600 mm, Perlengkapan: pencahayaan, We offer our Villex Mini Cube Nero 2.0 container in this listing, which can be used as an office container, classroom container, kindergarten container, refugee container, living container, or site container. Dimensions: 4.0 x 2.4 x 2.6 m Delivery: Available nationwide (Germany) Standard Features: Condition: New & Assembled Exterior color: RAL 7016 (anthracite) External wall thickness: 50 mm Floor space: 9.6 m² Weight: 800 kg 1x entrance door (205 cm x 105 cm) 1x double window: single sash, fixed glazing with tilt function Electrical installation: 6x sockets (3x double sockets), circuit breaker + fuse, surface-mounted wiring (PVC) Cjdsy Egq Hopfx Aiujrc We manufacture your container individually according to your requirements! Optional features (surcharge applies): - Custom dimensions, e.g. 7x3 m, 4x2.4 m, double container, triple unit, and more - Different window sizes - Various colors - Flooring colors - Practical forklift pockets - Light fixture - Roller shutters - Heating - WC, shower, toilet, wash basin - Kitchen - Plastered interior walls - And much more Delivery is usually carried out with our own vehicles. Payment is possible in cash upon delivery to our driver or conveniently in advance via PayPal or bank transfer. The delivery time is approximately 1–3 weeks nationwide after receipt of order, depending on the postal code area. Custom-made containers are manufactured and delivered within 1–4 weeks.

Kondisi: baru, Tahun pembuatan: 2025, Plasma cutting system for pipes and profiles Machine for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily selected on the 12" touch display. After manual loading of the workpiece, the automatic cutting process is started. - Pipe length: max. 6000mm - For round pipes up to max. OD = 220mm Codpfxegu Nmho Aiuorc - For square tubes up to max. 152.4 x 152.4mm (6" x 6") - Maximum pipe weight: 250KG - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting operation - Industrial PC control with 12” touch display - Data import via USB and LAN - Power supply: 400V 3-phase, 2KW - Dimensions: 690 x 100 x 180cm - Weight: approx. 1000KG Made in Germany The images show an older machine.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 19-1134P, Tahun pembuatan: 2020, jam operasional: 4 h, kapasitas angkut: 1.500 kg, tinggi angkat: 3.300 mm, tipe tiang: dupleks, tipe perpindahan gigi: hidrostatik, tegangan baterai: 24 V, Perlengkapan: Penandaan CE, hidrolika gripper, penjepit, en-001 Cedpew Izrcsfx Aiujrc

Kondisi: baru, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: KR 210 R2700 prime, Alapadatok KR 210 R2700 prime Tengelyek száma: 6 Vezérelt tengelyek száma: 6 Munkatérfogat: 55 m³ Pozícióismétlési pontosság (ISO 9283): ± 0,06 mm Tömeg: kb. 1111 kg Névleges teherbírás: 210 kg Maximális kinyúlás: 2696 mm Védettségi fokozat: IP65 Védettségi fokozat, csukló: IP65 Zajszint: < 75 dB (A) Szerelési pozíció: padlóra Helyigény: 830 mm x 830 mm Megengedett dőlésszög: ≤ 5 ° Alapszín: Alváz fekete (RAL 9005), mozgatott részek KUKA narancssárga 2567 Vezérlőegység: KR C4 Transzformációs elnevezés KR C4: KR210R2700 PRIME C4 FLR Üreges tengely átmérője A1: 139 mm (részben elfoglalva motorkábelekkel) Páratartalom osztály (EN 60204): - Környezeti feltételek besorolása (EN 60721-3-3): 3K3 Környezeti hőmérséklet Üzem közben: 10 °C – 55 °C (283 K – 328 K) Codjyl Ux Dopfx Aiuerc Tárolás/szállítás: -40 °C – 60 °C (233 K – 333 K) Tengelyadatok, KR 210 R2700 prime Mozgástartományok: A1 ±185 ° A2 -140 ° / -5 ° A3 -120 ° / 155 ° A4 ±350 ° A5 ±122,5 ° A6 ±350 ° Sebesség névleges teher mellett: A1: 105 °/s A2: 107 °/s A3: 114 °/s A4: 136 °/s A5: 129 °/s A6: 206 °/s Teherbírások, KR 210 R2700 prime Névleges teherbírás: 210 kg Névleges tehetetlenségi nyomaték: 105 kgm² Névleges teljes terhelés: - Névleges kiegészítő terhelés, alváz: - Maximális kiegészítő terhelés, alváz: - Névleges kiegészítő terhelés, forgóoszlop: - Maximális kiegészítő terhelés, forgóoszlop: 300 kg Névleges kiegészítő terhelés, kar: - Maximális kiegészítő terhelés, kar: 130 kg Névleges kiegészítő terhelés, kar: 50 kg Maximális kiegészítő terhelés, kar: 150 kg Névleges terhelés súlyponttávolsága: Lxy: 270 mm Lz: 240 mm A teherbírások és kiegészítő terhelések túllépése a robot élettartamának csökkenéséhez, valamint a motorok és a hajtóművek túlterheléséhez vezethet. Mindig javasolt az adott alkalmazás KUKA.Load szoftverrel történő tesztelése. Egyedi értékek túllépése esetén a KUKA Roboter GmbH bevonása szükséges.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, lebar ruang muat: 3.000 mm, panjang ruang muatan: 6.000 mm, tinggi ruang muatan: 2.600 mm, Perlengkapan: pencahayaan, The Villex Big Cube Block Line Black 2.0 from Villex Container GmbH is a modern 6.0 meter office container featuring the BLOCK-LINE design, renowned for its robust construction and versatile applications. Measuring 6.0 m in length, 3.0 m in width, and 2.6 m in height, it offers generous space for various uses. The 5 cm thick insulation ensures effective thermal performance, keeping the interior comfortable in all seasons. The anthracite-coloured panels (RAL7016) and base frame give the container a contemporary yet stylish appearance. For natural lighting, the container is equipped with a double-glazed glass door and two floor-to-ceiling windows (1000 x 2000 mm), creating a bright work environment. Electrical fittings include a 32A CEE plug (red), three double sockets, two LED lights, and a light switch. Despite a weight of just 1,000 kg, the Villex Big Cube Block Line Black 2.0 remains easy to transport while offering a high-quality, functional solution for modern office or workspace requirements. Article number: BCBLB2.0 Variant: 6.0 m Container Length: 6.0 m Width: 3.0 m Height: 2.6 m Insulation thickness: 5.0 cm Panel colour: RAL7016 (anthracite) Base frame colour: RAL7016 (anthracite) Weight: 1000 kg Doors: 1x door (glass) Windows: 1x floor-to-ceiling window (1000 x 2000 mm) & 2x glass elements Electrical equipment: 32A CEE plug, red. 3x double sockets, 2x LED lighting units & 1x light switch Includes air conditioning for heating & cooling We manufacture your container individually to your specifications! Optional features at extra cost: · Custom dimensions e.g. 9x3m, 4x2.4m, double containers, triple units and more · Various window sizes · Different colours Cjdpfxjy Hkvps Aiusrc · Flooring colour options · Practical forklift pockets · Additional lighting · Roller shutters · Heating · WC, shower, toilet, wash basin · Kitchen · Plastered interior walls · And much more Delivery is generally handled with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance via PayPal or bank transfer. The delivery lead time for standard containers in stock is approx. 1-2 weeks nationwide after receipt of order, depending on postcode area. Custom containers are manufactured and delivered within 1-4 weeks. Collection and inspection is possible at Villex Container GmbH, Dortmunder Str. 90, 59427 Unna by appointment during business hours and by pre-arranged telephone agreement.

Tahun pembuatan: 1990, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, 1 Crodpfx Aeytr Swoiujc

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 22 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61035145, gaya penjepit: 1.200 kN, diameter sekrup: 35 mm, volume langkah: 393 cm³, tekanan injeksi: 2.429 batang, berat injeksi: 140 g, tinggi cetakan (min.): 200 mm, gaya ejektor: 33.000 N, lintasan ejektor: 120 mm, langkah pembukaan: 950 mm, tinggi pemasangan: 450 mm, panjang total: 5.650 mm, lebar total: 1.820 mm, tinggi total: 1.950 mm, berat keseluruhan: 6.700 kg, kapasitas pemanasan: 15,5 kW (21,07 hp), jenis penggerak: Vollelektrisch, bentang bebas: 570 mm, berat alat: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we are offering our inspected and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry solution for all-electric injection moulding, enabling quick and innovative responses to market demands. It combines high performance, simple operation, and short delivery times. The machine is suitable for a wide variety of applications, including packaging, electrical and electronics, medical technology, and the automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to the all-electric machine concept – Fast and reliable delivery due to the base machine concept featuring a broad range of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, Year 2013) CONTROL - MC P1 with 15'' TFT colour display featuring multi-touch functionality CLAMPING UNIT - Clamping force: kN 1200 - Maximum mould opening force: kN 180 Crsdpsy Rmwdefx Aiujc - Clear space (h x v): mm 520 x 470 - Mounting platen dimensions (h x v): mm 690 x 640 - Minimum–maximum mould height: mm 180–450 - Maximum opening stroke: mm 850 - Maximum mould opening travel: mm 450 - Ejector drive: electric - Ejector stroke: mm 120 - Ejector force fwd/rev: kN 27 / 33 - Ejector speed fwd/rev: mm/s 300 / 300 - Maximum mould weight: kg 850 INJECTION UNIT - Screw diameter / type: mm 35 / standard - Effective L/D ratio: 22.9 - Injection pressure: bar 2429 - Shot volume: cm³ 154 - Shot weight at max. stroke for PS: g 140 - Injection speed: mm/s 200 - Injection rate: cm³/s 192 - Screw speed: rpm 374 - Plasticising rate (standard screw): g/s 18.9 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 22.7 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 200 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight including control cabinet: t 6.7 - Length x width x height: m 5.18 x 1.76 x 1.90 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve: single (BWAP) - Pneumatic control for hot runner shut-off: single - Electrical interface for pneumatic cascade: 4-fold - Euromap interfaces for automation: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold: 4-fold - Electrical prewiring for external hydraulic unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding function - Graphic analysis package - Swivelling device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Kondisi: baru, nomor mesin/kendaraan: 0770, berat kosong: 2.800 kg, berat muatan maksimum: 20.000 kg, berat keseluruhan: 22.800 kg, konfigurasi gandar: 2 gandar, panjang ruang muatan: 6.000 mm, lebar ruang muat: 2.000 mm, tinggi ruang muatan: 640 mm, ukuran ban: 450x300x305, kondisi ban: 100 persen, Tahun pembuatan: 2026, berat operasi: 22.800 kg, tpw20-alas-2025 Crjdpfx Aehbh Rtsiuec

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, lebar ruang muat: 2.400 mm, panjang ruang muatan: 5.000 mm, tinggi ruang muatan: 2.600 mm, Perlengkapan: pencahayaan, Container shown in the image are in stock and immediately available. Inspection and collection on site are possible. We are offering Villex Medium Wood Pavilion 2.0 containers in this listing, which can be used as office containers, sanitary containers, school containers, kindergarten containers, refugee containers, living containers, or site containers. Dimensions: 5 x 2.4 x 2.6 m Delivery: Nationwide available Standard Features: Condition: New & Assembled Wood-look cladding panels (as shown in the photos) External wall thickness: 50 mm Floor area: 12.0 m² Weight: 900 kg Csdpsy E Rxbefx Aiusrc 1x Door (glass) 2x Floor-to-ceiling windows (1000 x 2000 mm) Electrical equipment: 3x Sockets, circuit breaker + fuse Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver, or conveniently in advance via PayPal or bank transfer. Delivery time for standard containers in stock is approx. 1-2 weeks nationwide after order confirmation, depending on postcode area. Custom containers are manufactured and delivered within 1-4 weeks.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, berat keseluruhan: 1.000 kg, lebar ruang muat: 2.400 mm, panjang ruang muatan: 6.000 mm, tinggi ruang muatan: 2.600 mm, Perlengkapan: pencahayaan, The container in the picture is in stock and available for immediate delivery. Viewing and collection are possible. We are offering you the Villex Standard Cube Nero 2.0 container in this listing, which can be used as a storage container, office container, sanitary container, classroom container, kindergarten container, living container, or site container. Dimensions: 6.0 x 2.4 x 2.6 m Delivery: Possible nationwide Standard Features: Condition: New & Assembled Exterior color: RAL 7016 External walls: 50 mm thickness Area: 14.40 m² Weight: 1000 kg 1x entrance door Electrics: 6x power sockets, circuit breaker + fuse, surface-mounted cabling (PVC) We manufacture your container entirely according to your specifications! Optional extras for an additional charge: - Custom sizes, e.g. 6x3m, 7x3m, 4x2.4m, 5x2.4m, 6x2.4m double containers, triple unit systems, and more - Various window sizes - Various color options - Flooring color options - Practical forklift pockets - Air conditioning - Lighting - Roller shutters - Heating - WC, shower, toilet, washbasin - Kitchen - Plastered interior walls - And much more Delivery is usually carried out with our own vehicles. Payment can be made in cash upon delivery to our driver or in advance by PayPal or bank transfer. The delivery time for standard containers in stock is approximately 1-2 weeks nationwide after receipt of order, depending on postal code area. Csdpfoy Egt Uex Aiujrc We manufacture and deliver custom containers within 1-4 weeks.

Kondisi: belum diuji (bekas), Mesin kombinasi pemotong dan pelipat, panjang pelipatan 6000 mm Credpfoy Rfpfox Aiuec

Tahun pembuatan: 2026, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, frekuensi input: 50 Hz, daya laser: 30 W, panjang gelombang laser: 1.064 nm, panjang area pemindaian: 110 mm, lebar area pemindaian: 110 mm, jenis pendinginan: udara, jenis arus masuk: AC (pendingin udara), jenis laser: laser serat, The LAS 22 is a compact desktop unit with a small working area, making it ideal for marking small components. Thanks to its compact design, the system is highly practical and can be used virtually anywhere. The device is very easy to operate, even without programming knowledge. With the powerful laser software, text, numbers, 2D codes, QR codes, and logos can be created with just a few clicks, no advanced programming skills required. The software can automatically increment serial and article numbers after initial setup. Additionally, the software is capable of importing data (such as variable information like drawing numbers, project names, etc.) from existing tables and transferring it automatically into predefined fields. A hand scanner can also be integrated. Standard equipment includes a laptop with a Windows operating system and laser software. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical components. - Fiber laser 30 Watt (Option: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x 110 mm - Marking software EZCAD in German / English - Pilot laser (easy preview/contour preview) - Focus finder (simple focusing) - Max. component height approx. 95 mm - Grid holes for fixtures - Clamping surface 310 x 190mm - Electrically adjustable Z-axis - Electric door with pinch protection stop - Optional: extraction unit (incl. activated carbon filter) - Optional: 3-jaw chuck for marking cylindrical parts - Welded steel sheet construction - Connection 230V - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (LxWxH): 600 x 400 x 690 mm Codpfx Aijwkpxkeujrc - Weight: approx. 45 kg

Kondisi: hampir baru (bekas), berat kosong: 2.300 kg, berat muatan maksimum: 20.000 kg, berat keseluruhan: 22.300 kg, inspeksi berikutnya (TÜV): 11/2025, panjang ruang muatan: 5.000 mm, lebar ruang muat: 2.000 mm, ukuran ban: 450x300, warna: oranye, Tahun pembuatan: 2025, berat operasi: 20.000 kg, Trailer angkut berat dengan dimensi 5000 x 2000 x 610 mm Credpfx Aon D D S Soiujc Kapasitas angkut 20 ton pada 6 Km/jam Sistem kemudi: kemudi roda penuh dengan lengan poros dan batang penghubung yang dapat disetel Ban: ban solid 450 x 300 pada pelek baja dengan bantalan kerucut di kedua sisi, drawbar dengan mata pengait tempa 40 mm Drawbar dengan pengaman jatuh, lantai transportasi dari kayu spruce tebal 40 mm tenggelam dan disekrup Di setiap sisi memanjang rangka dilas dengan cincin pengikat untuk pengamanan muatan. Pengganjal roda kerja ganda terpasang pada rangka.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Speidel Tank- und Behälterbau Year of manufacture: 2020 Technical data: Net capacity: approx. 1,250 liters Material: Stainless steel 1.4404 / AISI 316L Design: insulated (with thermal jacket / insulation jacket) Internal surface: suitable for food and pharmaceutical applications Operating pressure: atmospheric (storage tank) Temperature range: suitable for temperature-controlled media Connections: hygienic clamp fittings Manway: available Bottom: conical (complete drainage) Feet: height-adjustable Application: The tank is ideally suited for storing pharmaceutical, cosmetic, or food-processing liquids. It was used in a pharmaceutical facility as a CIP tank and operated under hygienic conditions. Typical applications include: - Intermediate storage of bulk products - CIP feed tank - Storage of alcohol, cleaning, or disinfecting solutions - Process integration in filling lines Construction: - High-quality stainless steel design (316L) - Insulated vessel for temperature-controlled processes - Hygienic design with clamp connections - Conical bottom for complete residue drainage - Industrial-grade construction by German manufacturer Speidel Condition: - Very good condition - Used, well maintained - Immediately available FAT / Documentation: - Operating manual available - Manufacturer’s documentation available Scope of delivery / Documentation: - Complete stainless steel tank - Insulation jacket - Documentation / operating manual - Nameplate available Special features: Cedpfxey I Skwo Aiujrc - German brand quality (Speidel) - Suitable for pharmaceutical, cosmetic, and food applications - Ideal as CIP feed tank or buffer tank - Compact design with high quality

Kondisi: bekas,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Carl Zeiss Contura G2 7/10/6 VAST XT Gold Data teknis: Rentang pengukuran: X=700mm, Y=1000mm, Z=600mm Kontrol C99 dengan panel pengoperasian BP26_SE Kalibrasi terakhir 05/2025 Retrofit Perlengkapan: Sistem pergantian probe MSR 8 posisi Rak pergantian probe Aksesori probe Bola kalibrasi Workstation HP Z4 WIN11 dengan monitor Cjdpfxsy Ia Taj Aiujrc Software Calypso Opsi Planner, IGES in/out Aksesori tambahan

Kondisi: baru, Tahun pembuatan: 2025, PROFIL BENDING ATTACHMENT PB20 The ideal supplement for pipe bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be mounted quickly and easily onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping device and pulled around the bending tool. With this system, the length of the legs to be bent can be precisely measured in conjunction with a length stop, ensuring repeatable accuracy during bending. TECHNICAL DATA: • Bending capacity (Steel 37): 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radii R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) Crjdpfx Asnh R Ekjiusc OUR SERVICE: • Welcome to test production in our in-house demo room • On-site consultation and informational meeting at your location • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your facility

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.000 mm, panjang total: 3.400 mm, lebar total: 1.850 mm, berat keseluruhan: 1.000 kg, panjang meja: 2.500 mm, lebar meja: 1.000 mm, kecepatan pemotongan: 10.000 mm/menit, Mesin pemotong universal yang andal dan sepenuhnya berfungsi. Tahun pembuatan 2009, termasuk generasi perangkat lunak terbaru dan paket pengembangan lengkap. Siap digunakan langsung dari stok. Produsen: Schwartmanns Maschinenbau GmbH Model: EFM 26.1 Credpfx Aisy Idmdeuec Tahun pembuatan: 2009 Perangkat lunak: Versi perangkat lunak terbaru (per 2026) termasuk dalam pengiriman Cakupan program: Semua program pengembangan yang tersedia Kondisi: Bekas, diuji di bengkel dan sepenuhnya berfungsi Mesin berada di gudang kami di 50389 Wesseling dan dapat diperiksa serta didemonstrasikan dalam kondisi hidup.

Kondisi: sangat baik (bekas), Printing International Cristal 90X2 Cjdsv Iyh Sepfx Aiuorc

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 230 V, jenis pendinginan: udara, panjang gelombang laser: 1.064 nm, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. Laser technology has become indispensable in many industries for permanent marking applications. The powerful laser software makes it quick and easy to implement texts, numbers, 2D codes, QR codes, and logos with just a few clicks, without the need for extensive programming knowledge. The software automatically increments serial and article numbers after prior configuration. Additionally, the software can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a hand scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, motorized Z-axis, drawer systems, and more, are available. Made in Germany Fiber laser: 30 watts, 20 watts, or 50 watts • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (optional larger) • Signal lamp to display operating status • Optional: Rotary axis (3-jaw chuck) • Optional: Extraction unit (incl. activated carbon filter) • Optional: Digital height measuring system • Optional: Autofocus system for automatic focus distance measurement • Marking software EZCAD in German / English (other software available on request) • Pilot laser (simple preview, plaintext preview) • Focus finder (easy focus adjustment) • Max. part height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • IPS PCAP touchscreen and adjustable keyboard tray • Sturdy aluminum frame • Air-cooled Cjdpfswlc Stox Aiujrc • Door width approx. 700 mm / Door height (pass-through): approx. 400 mm • Connection: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg