Saw manik-manik kaca

RYKO GmbH GLSP-200N-AV

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm Pjdpfxoxnlgcs Anwopt - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2006, 1 piece used CONCRETE BATCHING PLANT Manufacturer: Liebherr Model: Betomix 1.0 Year of manufacture: 2006 Theoretical output: 60 m³/h compacted concrete Aggregates: 120 m³ (4 x 30 m³) inline silo with weighing belt Mixer: Liebherr ring-pan mixer 1.0-R Dosing: Aggregates: weighing belt Water: water scale Additives: additive scale Cement: cement scale Control container: included Control system: SIMMA Pedpowk Hxhjfx Anwjpt Cement silos: 3 x 100 t (transport dimensions D=3 m, detachable legs) INCLUDING VARIOUS SPARE PARTS AVAILABLE IMMEDIATELY Price INCLUDES DISMANTLING Offer and prices are strictly net ex-works Subject to prior sale, errors and/or misrepresentations reserved, without guarantee and/or warranty, sold as seen, ex location and/or standing Any reproduction, reuse, publication and/or copying of this offer is strictly prohibited in all respects!

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tipe perpindahan gigi: mekanis, jenis bahan bakar: listrik, Tahun pembuatan: 2019, Height: approx. 4,700 mm Hopper capacity: approx. 60 m³ Apron feeder width / length: approx. 1,150 x 4,800 mm Length: approx. 7,400 mm Width: approx. 5,200 mm Ppedpfx Ajwk E Emjnwst Bonfiglioli gearbox: Type SK 185 Siemens electric motor: 346 to 524 Volt, 160 Watt

Kondisi: bekas, Tahun pembuatan: 2015, Vertical CNC machining center with 3 controlled axes and an exceptional Y-axis machining capacity. Equipped with a vacuum-table clamping system that secures panels and sheets using vacuum pressure, this solution is especially efficient when processing thin components that are difficult to clamp with conventional systems. The machining center features a set of valves allowing different table zones to be activated or deactivated, thereby focusing vacuum in a specific area and optimizing the clamping of small parts. Capable of interpolated milling and drilling operations on composite panels, aluminum, steel or titanium sheets, and aluminum profiles. Tekna provides user-friendly software, suitable both for experienced CNC programmers and users with less experience. The TKE 783 is a 3-axis machining center designed for interpolated drilling and milling on composite panels, aluminum, steel or titanium sheets, and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Worktable dimensions: 2010 x 6300 mm Weight: 4842 kg Feed rates: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Ppsdsv D A Imjpfx Anwet Made in: Italy Other details: Previously used for milling aluminum up to 4 mm thick. The machine is connected and can be seen in operation and tested in Estonia. It will be prepared for transport in April–May. If you have any additional questions, we will be happy to assist you.

Kondisi: bekas, en_001 Ppjdpevc Aklsfx Anwst

Tahun pembuatan: 1977, Kondisi: diremajakan ulang (bekas), I am selling a Rapid DGS double mitre saw, year of manufacture 1977. Swivel heads. Drilling heads on each side at the front included. Podpfx Anod N Rb Dewopt Very good condition. Available immediately.

Tahun pembuatan: 2014, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Mobile Späneabsauger MG4, schallgedämpft und mit automatischem Start. Antistatischer Filter, geeignet für die Absaugung von Aluminium-, PVC- und Stahlspänen. Automatische Filterreinigung sowie einfaches Entleeren des Spänebehälters dank Fahrrollen. Die Ausführung VP ist mit einer Steuerungsbox inklusive potentialfreiem Kontakt zur Maschinenfernsteuerung ausgestattet. Das vordere Saugsystem besteht aus zwei Saugstutzen aus Aluminiumdruckguss, Durchmesser 100 mm. Über verstärkte Kunststoffschläuche sind damit mehrere Absauganschlüsse an Schneidemaschinen, Sägezentren, Bearbeitungszentren und PVC-Maschinen möglich. Ppodpfsycgtbex Anwot Im Lieferumfang enthaltenes Zubehör: Reduzierungen auf 70 mm, Y-Stück sowie ca. 14 m Absaugschlauch. (Optimal vorbereitet für eine Emmegi Doppelgehrungssäge)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, • Complies with CE standards • This is a corner crimping machine designed for 90-degree joining of aluminium profiles • Equipped with 2 pneumatic top clamps and pneumatic blade movement • Features a millimeter scale system for blade height adjustment and movement • The centering square stop is automatic • Equipped with a discharge button for precise adjustment • Two pedals are used for pneumatic clamping of profiles • Includes polyamide plates to protect profile surfaces from damage Ppsdpfsrbiv Aex Anwst • Side support arms are included

Tahun pembuatan: 2001, Kondisi: sangat baik (bekas), Single-screw extruder WEBER NE5 1-30:D with 2 WEBER ZE30 co-extruders Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: Suitable for PE, PP, or three-layer pipe production, or for sheathing pipes with strip application The line was used for manufacturing heating pipes Condition: Very good 2 units WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe line is my property Psdpfxshy Tp Dj Anwjpt Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GG520A-17518 & GG502S-16471, lebar total: 5.100 mm, panjang total: 5.350 mm, tinggi total: 1.500 mm, berat keseluruhan: 3.250 kg, jenis arus masuk: tiga fasa, frekuensi input: 50 Hz, tekanan: 8 batang, panjang pemotongan (maks.): 3.700 mm, Pengukuran maksimum: 3210 mm Pengukuran minimum: 150 mm Panjang potong maksimum: 3700 mm Panjang potong minimum: 250 mm Monolitik: 3 - 10 mm Laminasi: 2+0,38+2 (22-1) minimum 8+4,56+8 (88-12) maksimum Bobot maksimum kaca pada lengan saat pemuatan/pembongkaran: 450 kg Pjdeycgiiepfx Anwept