Beli Omec Folder Lembaran Logam bekas (33.757)

Kondisi: baru, steel-roll-bender-1280mm Ncodpfx Ameyvvpyeksu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1994, translate_de_hu_01 Nodjy Ez A Ropfx Amkocu

Kondisi: siap digunakan (bekas), Sertom-brand hydraulic plate bending machine, working length 25,000 mm with feed-in, two bottom rollers of 300 mm diameter, top roller diameter 318 mm, maximum sheet thickness 14 mm. Roller drive motor power: 22 kW; movement motors: 5.5 kW; lifting frame: 2.5 kW. Dimensions: 600x190x210(h) cm. Weight: 15,500 kg. Ncsdpjnr Npyofx Amkou

Kondisi: bekas, Wide Belt Sander Used Manufacturer: TimeSaver Series: WRB Machine No.: 2480-19 Dry-working deburring/edge-rounding machine with contact rollers and a rotating brush unit Max. working width: 1350 mm Abrasive belt dimensions (W x L): 1350 x 1900 mm Brush diameter (external): 530 x 350 mm Table opening: 0.8–100 mm Min. workpiece size: 50 x 50 mm Brush speed: 6–17 m/sec Abrasive belt speed: 11 m/sec Feed speed: 0.2–8 mm Power consumption: Unit W 1: 11.0 kW Unit RB: 1.5 kW Brushes: 4 x 1.5 kW Connection: 400 V, 50 Hz Compressed air required: 6 bar Total consumption: 25 l/min Includes ceramic brush set R plus 350 x 530 mm and zirconium brush set grit 180 The machine has been fully overhauled New conveyor belt installed Application: Abrasive belt roller unit W: Pre-deburring with abrasive belt or Scotch-Brite belt Removal of heavy burrs Ncsdpfxoudb R Io Amkju Creating or repairing a sanding or brush finish RB unit: Deburring and edge rounding of flat and profiled parts Weight: 6,200 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2026, Timesavers Series 10 Manual Grinder This is a demonstration machine that has occasionally been used for demo purposes. Nedpfxofhb N Sj Amkocu Very simple operation and comfortable use. Equipped with a grippy rubber conveyor as well as an additional vacuum area for small parts. Speed is continuously adjustable. The machine is currently in our warehouse and can be inspected, tested, and accepted under power at any time.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, 1 Njdpfxexaawgj Amkecu

Kondisi: bekas, Tahun pembuatan: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm steel Bending capacity: 8.0 mm steel Top roll diameter: approx. 205 mm Side roll diameter: approx. 195 mm Control: conventional Njdpfx Aoxacdvemkjcu Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll concept offers a wide range of bending and rolling options - Swivelling control unit at the front * Operation – control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters up to 1.1 times the top roll diameter achievable - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy steel welded construction - Electro-hydraulic drop-end for easy removal of pipes - Manometer / pressure indicator for the rolls - Safety device (safety cable with switch unit) - Operating instructions (PDF)

Kondisi: baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, Seamer kaleng semi-otomatis untuk kaleng bulat. Versi stainless steel. Diameter kaleng: 42–163 mm, tinggi: 26–300 mm, ketebalan material: 0,35 mm. Saat ini terpasang untuk 99 mm. Ncodpfxoxn Nqlo Amkju

Kondisi: bekas, Tahun pembuatan: 2008, lebar kerja: 800 mm, TimeSavers grinding machine designed for surface processing of parts up to 800 mm wide. Workpiece fixing – vacuum. The machine is equipped with 2 stations: abrasive belt / brush. Suitable for grinding, edge rounding, oxide and slag removal, and final finishing. Technical specifications: Model: Timesavers 41 series 900 WRD Year: 2008 Max. workpiece width: 900 mm Max. workpiece height: 80 mm Min. workpiece height: 15 mm Feed rate: 1 – 10 m/min (adjustable) Ncsdpfxevyhttj Amkeu CNC controller: adjustable feed speed, workpiece dimensions, grinding pressure, and more. Other: heater, suitable for operation in cold environments. If you have further questions, we will be happy to answer them.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2010, XXL-Center RAS 75.06 Ncsdpfxex Hf Tvo Amkju - Data teknis umum dalam mm: Panjang tekukan: 6400 mm Ketebalan pelat maks (400N/mm2): 1,5 mm Ketebalan pelat maks (750N/mm2): 1,0 mm Ketebalan pelat maks (200N/mm2): 2,0 mm Rentang gerak penjepit: 10 – 750 mm Ruang bebas di depan rahang hingga: 300° Meja masukan yang dapat digeser: ya Penjepit: ya Pemrograman: otomatis melalui Bendex Dimensi mesin inkl. pagar pengaman sekitar: 9400 x 3000 mm Bobot 12,5 ton - Data mesin: Penggerak motor; 400V, 50/60 Hz, 3 fasa Tahun pembuatan: 2010 Kondisi: Akan direkondisi total - Gambar bersifat contoh -

Kondisi: bekas, Tahun pembuatan: 1986, blechbiegemaschine-3walzen-2040mm-40mm Nodpfx Asy Ezzyjmkecu

Kondisi: bekas, de-hu-001 Njdpfoyuql Sex Amkscu

Kondisi: bekas, Load capacity: 3 t Opening width: 38 mm Nedpfxjb Nwkxj Amkecu Weight: 15 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, en-de-001 Ncedpfxoytcnvj Amkeu

Tahun pembuatan: 2008, jam operasional: 3.575 h, Kondisi: siap digunakan (bekas), Data Umum Tinggi pengukuran: 1300 mm Ncedpfx Amox Sz D Iokju OMSG CAPRI 9/13 M ini diproduksi pada tahun 2008. Memiliki area kerja berukuran 900 mm x 1300 mm dan kapasitas beban gantung hingga 2 x 500 kg. Dilengkapi dengan 2 turbin 5,5 kW, pelindung area sembur yang dapat diganti, serta sistem pengumpulan material blasting berbasis sekrup. Juga termasuk elevator, sistem pembersihan grit, dan gerakan gantung yang dioperasikan melalui panel kontrol. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Jenis Aplikasi Mesin Pemrosesan Plat Logam Lainnya

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, ketebalan pelat baja (maks.): 2 mm, tebal plat aluminium (maks.): 3 mm, Technical specifications: Ncjderwxkhepfx Amkeu Maximum working length: 2160 mm Maximum sheet thickness (steel 400 N/mm²): 2.0 mm Maximum sheet thickness (stainless steel): 1.5 mm Maximum sheet thickness (aluminium): 3.0 mm Maximum developed sheet width: 1500 mm Maximum bending height on four sides: max. 203 mm Bending blade operating range: 180 degrees Approximate machine width: 5500 mm Approximate machine length: 7000 mm Machine height: 2500 mm Total weight: 23,000 kg Power: 25 kW Frequency: 50 Hz Pressure: 6 bar Loading system: Gantry-type blank feeder

Kondisi: baru, condition: new delivery time: approx. 12 weeks from order country of origin: Italy price: €153,200 leasing rate: €2,895.48 working width: 1,350 mm sheet thickness range – mild steel: 0.4 – 120 mm abrasive belt dimensions: 1,370 x 2,200 mm extraction capacity: 6,000 m³/h extraction connection diameter: 150 mm compressed air connection: 6 bar length: 4,200 mm width: 2,300 mm height: 2,350 mm weight: 4,200 kg EQUIPPED WITH 2 WORKING GROUPS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT, TOP SIDE * The machine is constructed of welded and normalized steel to ensure a stable and rigid structure. * Working table with motorized height adjustment, made possible by the synchronized movement of 4 screws. * Independent motors arranged inside the structure with emergency brakes. Ncsdpfx Aeynmw Remkju * Dust extraction hoods located inside the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal tolerance * Thickness adjustment with control (+/- 0.1 mm) * Alarm monitoring center with instant visualization of emergencies and/or faults. FEED UNIT * Table made of solid metal construction with ground and wear-resistant sliding surface. * Modified structures for vacuum systems available on request * The table raises and lowers from 780 mm up to a maximum height of 950 mm above the floor. The motor power for table height adjustment is 0.25 kW. * Maximum permissible load on the table: 140 kg. * Variable feed speed with inverter, from 0.4 to 4.5 m/min; option of 0.2 to 2.0 m/min or 0.6 to 6.0 m/min. * Conveyor belt made of special natural rubber, oil and heat resistant, with automatic centering system. * Side guides that prevent the conveyor belt from lifting. * Rubberized pressure rollers, oil and heat resistant, installed before and after each working group. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Feed speed control via the main touchscreen. 1ST GRINDING UNIT WITH ABRASIVE BELT * Precision-ground and balanced contact roller, 180 mm diameter. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, allowing the working position to be controlled and compensating for abrasive belt wear over an 8 mm range. This system is managed by a pneumatic cylinder, which enables the automatic engagement of the unit for operation and, in case of emergency and/or machine stop, the immediate withdrawal of the belt from the working area. It is possible to use both abrasive belts and/or Scotch Brite. * Pneumatic On/Off switch. * Roller adjustment (up/down) “grit” stroke 10 mm * Variable speed motor 11 kW, with automatic braking in case of emergency. * Rotation speed in feed direction: 4 – 18 m/s. * Adjustable width and duration of oscillation. * Pneumatic abrasive belt tensioning system; LED display for wear monitoring. * Abrasive belt centering system, with electronic photo eye display, adjustable for amplitude and intensity of oscillation. 2ND ROTARY BRUSH UNIT * Comprising 8 deburring brushes: 4 clockwise, 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Kondisi: baru, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Italy Price: €74,000 Leasing rate: €1,398.60 Working width: 1350 mm Sheet thickness range – steel: 0.5 - 170 mm Abrasive belt dimensions: 1370 x 2200 mm Extraction capacity: 4,000 m³/h Suction connection diameter: 200 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Length: 1,750 mm Width: 2,100 mm Height: 2,180 mm Weight: 2,000 kg WITH 2 WORKING GROUPS: 1 X ABRASIVE BELT AND 1 X TOP BRUSH UNIT Machine made from stress-relieved welded steel construction for a stable and rigid frame. Work table with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Touch screen for: * Automatic star-delta switching of the main motors * Analog ammeter for each unit * Digital readout for sheet thickness with decimal point tolerance * Material thickness setting (+/- 0.1 mm) * Monitoring of machine status with alarm notifications FEED SYSTEM Heavy-duty steel frame, wear-resistant surface. Vacuum conveyor belt available on request Variable feed speed via frequency inverter: 0.6 to 6.5 m/min. Rubber conveyor belt, oil- and heat-resistant Automatic belt centering Side guides to prevent the belt from lifting off Rubber hold-down rollers before and after each station, oil- and heat-resistant Idler rollers on the infeed and outfeed tables 1ST WORKING UNIT – R Balanced contact roller with oil- and heat-resistant nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinders for automatic feed to the working position and lift-off in case of emergency stop Compatible with abrasive belts and/or Scotch Brite Motorized adjustment and electronic control of contact roller height Variable-speed drive with automatic emergency brake Pneumatic belt tensioning system Abrasive belt tracking system with electronic photo cell Oscillation adjustment for width and timing Positioning accuracy of contact roller adjustment mm +/- 0.02 Positioning speed of contact roller adjustment m/s 10 Contact roller diameter mm 180 Rubber roller hardness Shore 55 Stroke of contact roller adjustment (grit adjustment) up/down mm 8 Abrasive belt speed m/s 3 - 18 Motor power kW 11 2ND WORKING UNIT – X 2 rows of vertical brushes, 10 rotating clockwise and 10 counter-clockwise Oscillating cross movement for the entire group Quick-change system for brushes Brush diameter mm 115 Number of brushes pcs. 20 Oscillation stroke mm 15 Brush rotation motor power kW 5.5 Rotational speed rpm Njdpfxjynmwke Amkecu 300 - 1000 Oscillation motor power kW 0.37 Brush linear speed m/s 10.0 ACCESSORIES B Group – external horizontal drum brush Ø 150 mm with Scotch Brite brush €5,580.00 with 0.3 mm wire brush €5,900.00 R GROUP – ABRASIVE BELT Motor 15 kW €1,060.00 OPTIONS: Return to Sender system (workpiece is returned to the front) €1,290.00 Conveyor belt with vacuum system, 300 mm wide – 4.0 kW €4,780.00 2 additional PVC-coated rollers at infeed and outfeed €2,040.00 Tampico brush system for part cleaning 0.55 kW Ø 150 mm €4,500.00

Kondisi: baru, Automatic Sheet and Profile Shot Blasting Machine Ncedpfx Amjghaywekou Preferred for surface cleaning tasks on products such as sheet metal, NPI, NPU, angles, profiles, etc. The parts to be blasted move in and out of the machine via roller conveyors. Turbines are installed in the machine body at appropriate angles so the surfaces of the parts can be blasted from both above and below. Key advantages include rapid shot blasting of products. Both semi-finished and finished products can be transported via the roller conveyor and conveying system. The digital speed control system used in our machines can be adjusted for each load according to part type and desired blasting area. The machine is designed and manufactured according to the size, weight, and daily quantity of the parts to be blasted. Conveyor lengths can be extended or shortened upon request.

Kondisi: baru, Tahun pembuatan: 2025, Die Doppelstehfalz-Profiliermaschine F3 wird zum Herstellen von Doppelstehfalzverbindungen für Dachpaneele eingesetzt, die für die Montage von Doppelstehfalzdächern verwendet werden. Das Doppelstehfalzdach erfreut sich großer Beliebtheit, da durch die spezielle Form des Schlosses das Eindringen von Wasser an den Verbindungsstellen der geschlossenen Doppelstehfalz-Paneele wirksam verhindert wird. Die spezielle Form bedeutet, dass sich die Doppelstehfalz-Paneele an ihren Kontaktpunkten gegenseitig überdecken. Nach der Montage auf dem Dach werden sie mittels spezieller Werkzeuge für den Doppelstehfalzverschluss geschlossen (manuelles Werkzeug zum Verschließen des Doppelstehfalz und elektrische Maschine zum Verschließen des Doppelstehfalz). Ein besonderer Vorteil dieser Stehfalz-Profiliermaschine ist die Möglichkeit, die Breite der Stehfalz-Dachpaneele äußerst einfach zu verstellen. Über eine spezielle Stellschraube an einer Seite der Maschine kann der Bediener durch einfaches Drehen die Paneelbreite anpassen. Die Einstellung der Stehfalz-Profiliermaschine beansprucht somit nur wenig Zeit, was eine effiziente Nutzung der Arbeitszeit ermöglicht. Diese Doppelstehfalz-Profiliermaschine ist geeignet zur Herstellung von Doppelstehfalz-Paneelen aus unterschiedlichen Metallen (verzinkter Stahl, stahl mit Kupfer-, Zink-, oder Titanzusatz, etc.). Die Maschine verfügt über sechs Walzenpaare, die die typische Form der Doppelstehfalz-Dachpaneele formen. Die Maschine kann für den Betrieb an 220V oder 380V Leitungen gefertigt werden. Optional erhältliches Zubehör zur Stehfalz-Profiliermaschine: - zusätzliches Walzenpaar zur Herstellung von Sicken auf den Dachpaneelen Ncsdpfx Aohz Twwjmksu - zusätzliches Walzenpaar zum Biegen von Paneelen mit großem Biegeradius - Schneidmesser - Blechabroller - Handwerkzeug zum Verschließen der Falzverbindung - elektrische Maschine zum Verschließen der Falzverbindung - Blechzuschnittmaschine Durch das geringe Gewicht und die kompakten Maße ermöglicht unsere Doppelstehfalz-Profiliermaschine den Einsatz direkt an der Baustelle der Doppelstehfalz-Dachmontage. Dies vermindert die Notwendigkeit, separate Produktions- oder Lagerflächen anzumieten und reduziert somit Transport- und Logistikkosten erheblich. Unser Unternehmen fertigt diese Doppelstehfalz-Profiliermaschine seit 2005 und verfügt über umfangreiche Erfahrung, um Ihnen eine optimale Lösung für Ihr Geschäft anbieten zu können. Für weitere Informationen zu Preis und Liefermöglichkeiten dieser Doppelstehfalz-Profiliermaschine kontaktieren Sie uns bitte. Wir beraten Sie gerne ausführlich.

Kondisi: baru, EN: ROGI PR-1300 ELECTRIC ROLL BENDING MACHINE Heavy-duty and robust construction Weight: 800 kg Equipped with hardened rolls Roll hardness: HRC 28-32 Minimum sheet thickness: 0.5 mm Maximum sheet thickness: 3 mm Ncjdpfx Amoga Tvwskou Maximum working width: 1300 mm Pre-bending capacity: 2.5 mm Roll diameter: 95 mm Motor power: 2.2 kW INCLUDES: * Hardened rolls * SCHNEIDER electrical components

Tahun pembuatan: 2000, Kondisi: siap digunakan (bekas), Diese Manni-Sandwichpaneel-Produktionslinie wurde im Jahr 2000 gefertigt. Sie verfügt über eine diskontinuierliche Fertigungsstraße für Sandwichpaneele mit Polyurethan-Kern, inklusive Stationen zum Profilieren, Injizieren, Pressen, Schneiden, Stapeln und Verpacken. Die Hauptkomponenten umfassen eine Manni PMC 291 T Presse, ein Cannon H100 RF2 Polyurethan-Einspritzsystem sowie verschiedene Tresam-Profilieranlagen. Nutzen Sie die Gelegenheit, diese Manni-Sandwichpaneel-Produktionslinie zu erwerben. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Ncedsx E Ef Nepfx Amksu Anwendungsbereiche Sonstige Blechbearbeitungsmaschinen

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.500 mm, kecepatan pemakanan sumbu X: 4 m/menit, jenis arus masuk: tiga fasa, ketebalan lembaran (maks.): 102 mm, panjang total: 2.300 mm, lebar total: 2.600 mm, tinggi total: 2.500 mm, berat keseluruhan: 4.000 kg, tinggi kerja: 950 mm, panjang benda kerja (maks.): 102 mm, Deburring on both sides in just one pass – naturally with 100% reproducible results and precise processing of inner and outer edges – only the EdgeRacer 1500 D can offer you that. Ncjdpjucw Rbofx Amkou The EdgeRacer 1500 D, which deburrs both sides simultaneously, is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with embossings, notches, threaded holes, and similar features. The maximum component height is 102 mm. The adjustment of the brushes working from above and below can be set independently of each other. Moreover, thanks to roller conveyor transport, height adjustment can be performed below or above roller table level.

Kondisi: bekas, Tahun pembuatan: 2002, Sheet width: 3050 mm Sheet thickness: 3.0 mm (steel) Bending capacity: 3.0 mm (steel) Top roll diameter: 170 mm Bottom roll diameter: 170 mm Side roll diameter: 180 mm Control: conventional Connection: 380 V Total power requirement: 3.0 kW Weight: 4250 kg In good condition With new rubber-coated top roll (!!) Also suitable for bending non-ferrous metals - In inspected condition - machine video available - ?v=ZW8Us6Hbm3E Nodpfx Amoxacfgokscu Equipment: - Electro-hydraulic 3-roll plate bending machine - Asymmetrical roll arrangement - Electrically powered side roll adjustment * Including digital position display - Manual bottom roll adjustment * By hand crank - Including conical bending device * Tilting feature for bottom and side rolls * Parallel alignment in any side roll position - Rolls made from hardened SAE 1050 CK 45 - Manual folding bearing for removing closed tubes * Top roll must be lifted before opening the bearing (e.g. by forklift/crane) - Safety system - Power cable and connector - 4-way foot switch * 2x buttons for side roll movement (up/down) * 2x buttons for roll movement (left/right) * With 4x new foot switch covers - Operating manual (ENG) * Special accessories included: - Brand new top roll with plastic/rubber coating * Suitable for bending non-ferrous metals * e.g. copper and aluminum

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Sheet width 1070 mm Sheet thickness 4.0 mm Bending capacity 3.0 mm Roll length 1070 mm Roll diameter - top 110 mm Bending speed 3.0 m/min Motor power 2.2 kW Weight 848 kg Dimensions L-W-H 2250 x 1000 x 1800 mm New price approx. €10,000 Exhibition machine - like NEW (!!) Equipment: - Robust electro-mechanical plate bending machine - 2x central rolls driven by electric motor (top & bottom roll) - Rolls with forward/reverse function - Top roll swing-out manually, with folding bearing - Manual adjustment of side roll - Including conical bending device - Asymmetric roll arrangement - Rolls with profile grooves Nsdpfxjxacdpj Amkscu - Safety device (emergency stop cable with switch unit) - 1x movable control console - Operating instructions (ENG)