Beli Pemegang Collet Chuck bekas (4.858)

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS06, Demonstration Unit ATLANTA NEOS Stretch Wrapper ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film power stretch: 120–400% Motorized pre-stretch system with stepless adjustment Adjustable pre-stretch ratio from 120 to 400% via control panel Film application tension electronically controlled via control unit Quick-load system (IEF) for easy film roll change Film specifications: max. outer diameter Ø300 mm – height 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah each, connected in series Minimum 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Max wrapping height (machine with mast, incl. pallet): 2,150 mm Height detection via photoelectric sensor or manual input on display Protective rail for emergency stop of drive unit Emergency stop switch according to CE regulations Acoustic warning signal and warning light at machine start Fall protection for film carriage Start & Stop push buttons Machine operation complies with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All functional parameters adjustable via display - Display lock for program modification - Adjustable machine speed around the pallet up to 80 m/min - Carriage ascent and descent speed individually adjustable - Ascent speed: 1.3 – 5.4 m/min - Descent speed: 1.3 – 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Adjustable wrapping height Fjdpfx Aaeyktv Sjqsgb - Film application tension for base/top wrap, ascent/descent independently adjustable - Film pre-stretch for base/top wrap, ascent/descent independently adjustable - Ergonomic height for film roll change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrapping (upward/downward) - Simple wrapping (only up or only down) - Wrapping cycle with defined start and stop heights - Wrapping to a stored height (disabling height sensor) - Wrapping cycle for large pallets - Wrapping cycle for top sheet application - Soft-start cycle for installing edge protection - Wrapping cycle with reinforcement and adjustable wrap count Soft-start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or powered rope formation (optional) Other machines available immediately from stock in Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm Fgodpfx Ajykud Rsaqeb 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2024, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS04,

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Showroom unit Mytho S with TP / horseshoe cutout, ground-level access for pallet trucks and electric pallet stackers MAST VERSION Wrapping height 2450 mm Fsdpfx Aeyktrteaqsgb 99 programs TOUCH display 7" FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH), 200% pre-stretch, more or less pre-stretch available optionally TURNTABLE / TP Ø1650 mm / Opening at 6 o’clock – mast at 12 o’clock (adjustable at any time) ARYA system for automatic film application and cutting, incl. infrared remote control

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23SynthesiLow05, Demo machine, as new. SYNTHESI with flat turntable Turntable height 25 mm Fgedpeykuiajfx Aaqeb Short ramp 500 mm long TECHNICAL DETAILS: LOW PROFILE Turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage lift speed upwards/downwards Acoustic signal at start of wrapping and end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power, start & stop, and reset in accordance with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All functional parameters adjustable via display F00 - Display lock for program changes F02 - Steplessly adjustable turntable speed 5–12 rpm Carriage speed upwards and downwards can be adjusted independently F03 - Carriage lift speed upwards from 1.3 to 5.4 m/min F04 - Carriage lift speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10 wraps) F06 - Number of wraps at pallet top (1–10 wraps) F09 - Delay of photocell for wrap height F13–F16 - Film application tension base & top wrapping / ascent & descent individually adjustable F62 - Ergonomic film change height Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 programmable wrapping cycles F01-1 - Cross wrapping (upwards/downwards) F01-2 - Simple wrapping (upwards only or downwards only) F01-3 - Push button for manual functions F10–F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (photocell height sensing disabled) F22/F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for edge protection application F30–F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft start function to reduce film tears on sharp pallet edges Wrapping cycle with manual or powered rope-threading (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch set to 200% Film application tension electronically controlled via control unit Film specifications: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection: 230V – 1Ph+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: OPRS pinion for pre-stretch ratios of 150% / 250% / 300% available Additional machines available from stock in Ludwigsburg.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23NEOS04, Exhibition unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually storable programs Supplied with 1 remote control – additional units available as an option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film power stretch: 120-400% Motorized pre-stretch system with stepless adjustment Pre-stretch ratio adjustable from 120 to 400% via control panel Film tension electronically controlled via control unit IEF quick-change system for easy film roll replacement Film specification: max. outer diameter Ø300 mm – height 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be stored in 4 steps Fgodpfx Ajykug Sjaqsb TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah connected in series At least 160 pallets per charge – charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height (machine with mast, pallet included): 2,150 mm Height detection via light sensor or manual input on display Protective bar for emergency stop of drive system Emergency stop switch according to CE regulations Acoustic warning signal and beacon on machine start-up Anti-drop device for film carriage Push buttons for start & stop Machine operation in accordance with CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All operating parameters adjustable via display - Display lock for program changes - Adjustable machine speed around the pallet, up to 80 m/min - Film carriage speed up and down infinitely adjustable - Carriage speed upwards: 1.3 to 5.4 m/min - Carriage speed downwards: 1.3 to 5.4 m/min - Number of bottom wraps (1 - 10 turns) - Number of top wraps (1 - 10 turns) - Pallet wrapping height setting - Film tension for bottom & top wraps / ascent & descent separable - Film pre-stretch for bottom & top wraps / ascent & descent separable - Ergonomic height for film replacement PROGRAMMABLE WRAPPING CYCLES VIA PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrapping (upwards/downwards) - Simple wrapping (upwards only or downwards only) - Wrapping cycle with predefined start and stop height - Wrapping to a preset height (disables light sensor height control) - Wrapping cycle for large dimension pallets - Wrapping cycle for top sheet application - Soft start cycle for corner protection application - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Further units available immediately from Ludwigsburg stock.

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in several steps via programs Turntable height: 75 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage lifting speed up/down Acoustic signal at wrapping start and at end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in home position Fall protection for film carriage Push button for machine power-on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE OPERATING PANEL All functional parameters adjustable via display F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed 5-12 rpm Carriage travel speed up and down adjustable independently F03 – Carriage ascent speed from 1.3 to 5.4 m/min F04 – Carriage descent speed from 1.3 to 5.4 m/min Fgjdpfx Asykub Ajaqeb F05 – Number of wraps at pallet base (1-10 wraps) F06 – Number of wraps at pallet top (1-10 wraps) F09 – Photo cell wrapping height delay F13 - F16 – Film tension for bottom & top wrapping / ascending & descending can be set independently F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT THE OPERATING PANEL 6 storable wrapping programs F01-1 – Cross-wrapping (up/down) F01-2 – Simple wrapping (up or down only) F01-3 – Push button for manual functions F10-F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated for height) F22/F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for corner protection application F30-F31 – Reinforced wrapping cycle with adjustable number of wraps Soft start to reduce film breakage on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Options available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photo sensor for black products Cutting device etc. Further machines available ex stock Ludwigsburg. Some images may show optional equipment subject to surcharge. Illustration similar

Kondisi: baik (bekas), 3-jaw scroll chuck Make: RÖHM Diameter 500 mm Spindle mount DIN 55027 Size 11 Chuck bore 200 mm Chuck height 145 mm Weight 182 kg Accessories / Special features: • Hard turning and boring jaws • 1 chuck key Siegfried Volz Werkzeugmaschinen Fgedpfxepmtgns Aaqeb Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: sangat baik (bekas), 1 used, very well-preserved thread cutting chuck M 14-30 for cutting internal threads on reversible drilling machines, lathes, and milling machines. Suitable for both horizontal and vertical use. Brand: BILZ, Origin Germany Model: DSPL 30-MK4 • With Morse taper shank and tang according to DIN 228 B • Equipped with a patented double chuck (clamps both shank and square) • Elastic axial length compensation for compression and tension • Axis-parallel swivel device and elastic axial length compensation for cutting precise-pitch and true-running threads • Suitable for right-hand and left-hand rotation Technical Data: Suitable for thread sizes: M 14 - 30 Fsdpfx Aowimm Njaqjgb Morse taper size: MK 4 Clamping diameter, min.: 11 mm Clamping diameter, max.: 23 mm Axial length compensation: 30 mm Projection length: 230 mm Axis-parallel compensation: 2 mm Weight: 12 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: bekas, trans-001 Fgedpfx Aey D A Dtoaqsb

Kondisi: bekas, Tahun pembuatan: 2012, Kami menawarkan unit bekas WK WK-TNV holder alat / dudukan alat ini, tahun produksi 2012. Tipe: WK-TNV Tahun produksi: 2012 Nomor unit: 1309 Volume udara buangan (di inlet): 36.000 m³/jam Suhu ruang bakar maksimum yang diizinkan: 780 °C Tipe burner: WK-KAT-025-00/0 Daya burner: 650 kW Daya kipas: 200 kW Tekanan kipas: 3.500 Pa Efisiensi pemanas udara: % Fgodsx Igudspfx Aaqjb Suhu masuk maksimum yang diizinkan: 230 °C Laju alir pelarut maksimum yang diizinkan: 500 kg/jam Media pemanas: GAS ALAM Nilai kalor media pemanas: 32.900 kJ/m³ Konsumsi media pemanas maksimum: 749 m³/jam Jika Anda memiliki pertanyaan atau memerlukan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Kondisi: baru, Chuck self-centering 4-rahang dirancang untuk pemasangan pada mesin bubut, meja putar, dan mesin frais. Sistem pemasangan sesuai DIN 55029. Permukaan kerja yang dikeraskan dan diasah memberikan masa pakai lebih lama dengan tetap menjaga presisi dan repetisi. Piringan spiral yang seimbang dan seluruh chuck memungkinkan penggunaan kecepatan putar lebih tinggi saat proses tanpa getaran berlebih. Pemasangan langsung pada mesin ke ujung spindle tipe CAMLOCK. Data teknis: Parameter Nilai Satuan Chuck mesin bubut besi cor 4-rahang 3744 BISON A 200 mm St. 1:4 5 mm B 78 mm E 55 mm F 104,8 mm Q 6 J 29 mm Fsdpfoyw Tupex Aaqegb Berat 19 kg Perlengkapan: - chuck mesin bubut - rahang keras utuh luar - rahang keras utuh dalam - kunci

Kondisi: bekas, Tahun pembuatan: 1997, CMT Mesin Peregangan dan Pembentukan Keju. CMT FL 1400 / Boiler/Tangki/Pembentukan/Ekstrusi. Sistem pemasakan, peregangan dan pembentukan keju CMT dengan tangki sekrup untuk transfer keju, mesin pembentuk dengan 2 set cetakan, boiler dan tangki air panas, panel kontrol, buku manual, serta buku panduan teknis. Kondisi: Baik. Lokasi: Fgedpfx Ajy Ddwbsaqeb Penggunaan: Memasak, meregangkan, dan membentuk keju.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, Kami menjual 11 unit penjepit hidraulik Schunk tipe KSH 250. Meskipun tahun produksi 2002, penjepit ini praktis seperti baru. Masih dilapisi pelindung orisinal dan selalu disimpan kering di dalam gudang. Semua 11 unit belum pernah digunakan. Termasuk sisipan penjepit yang cukup untuk rentang penjepitan Ø34 hingga Ø62. Tentu saja, sisipan penjepit juga dapat disesuaikan dengan kebutuhan spesifik Anda. Fodpfx Aoyt I Dcoaqjgb

Kondisi: bekas, Collet dalam ukuran khusus - cocok untuk Weiler 260 dan Leinen 140 - Harga paket: EUR 250 netto Fgodpfxey Akzdo Aaqeb

Kondisi: baik (bekas), Werkzeughalter VDI 30 Fgjdpfx Aasww Hlusqsb

Kondisi: baik (bekas), Toolholder dibeli di perusahaan, digunakan untuk mesin Biglia. Fodjyuyhiepfx Aaqjgb

Kondisi: bekas, Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 800 kg, diameter luar chuck: 800 mm, diameter pemasangan: 520 mm, diameter lingkar baut: 436 mm, mount kerucut: 286 mm, Position 1.0) Chuck Diameter: ø 800 mm Three-jaw power chuck with 6 clamping jaws Fjdsy Appmepfx Aaqsgb Manufacturer: SMW-Autoblock ø 800HL-6GR Incl. size 11 flange: SMW Autoblock: 241261 FF2 Threaded connection for draw tube. Material clamping via chuck jaws: Pneumatic or hydraulic actuation. Includes bolt-on top jaws with serrated teeth. Weight: approx. 700 kg Good condition, low operating hours. Position 1.1) Optional flange available Mounting diameter: 520 mm Bolt circle: 436.6 mm; M24 Taper: KK 15: 285.78 mm Width: approx. 40 mm Weight: approx. 60 kg SMW-800HL Description Suitable for clamping thin-walled workpieces. Designed for horizontal CNC lathes. Adjustable to 6 jaws. STANDARD EQUIPMENT Power chuck with mounting bolts, Incl. set of top jaws Low maintenance due to sealed design (Proofline series power chuck). 6-jaw power chuck Position 2) 3-jaw power chuck ø 800 mm Manufacturer: FORKARDT Jaw interface: serrated teeth Size: to be confirmed Threaded connection for draw tube: on request Spindle adapter flange for machine: on request Price incl. shipping: on request

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 80 kg, diameter luar chuck: 400 mm, lubang spindel: 140 mm, Four-jaw scroll chuck Very good condition, signs of use visible – see photos. Fsdoy Apncjpfx Aaqsgb Jaws: 4 self-centering jaws → external clamping for larger diameters Suitable for: lathe; machining centre; milling machine Chuck mounting on milling table or machining centre (MC) via clamping flange. Jaw adjustment via square key and scroll plate, centrically adjustable, RÖHM type Z 400 Jaw dimensions: Width: 34 mm Length: 110 mm Slot B: xx mm Slot D: xx mm Total weight: approx. 90 kg Delivery includes chuck key. Additional jaws available on request Flange for milling table mounting available on request Delivery: Shipping by freight carrier on transport pallet on request.

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 115090324, de-hu-001 Fgjdpfx Aaei Hqhqsqob

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Pemegang alat bubut VDI40 - Dudukan CAPTO C4 Pabrikan: SANDVIK COROMANT Tipe: Set VDI40-CAPTO C4 Dudukan: Ø 40 mm Fodpfx Aaoy Apm Eoqogb ----- Terdiri dari: Pos1→ No.: 1405 =2 x Dudukan baja VDI40 dengan CAPTO C4 No. C4-RC2040-51030 Berat per buah: sekitar 4kg Harga satuan netto: 350€/unit ----- Holder alat potong—holder insert tersedia atas permintaan

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Chuck berukuran 315 mm dan 250 mm, dengan penyetelan terpusat dan penyetelan individu dari rahang penjepit, Fgodpfxsy Agmvo Aaqsb

Kondisi: bekas, berat keseluruhan: 260 kg, Material: baja Diameter: 710 mm Fgodpfoyxgf Rsx Aaqsb Lubang spindle: 150 mm Kecepatan spindle: 400 rpm Berat: 260 kg

Kondisi: hampir baru (bekas), Jumlah: 2 buah Adaptor frais / Chuck untuk Lorenz LS 156 Fjdpfouiz Hyjx Aaqjgb

Kondisi: sangat baik (bekas), RENISHAW Sistem 3R-656.31-3 Macro Probe dengan bola pengetesan 3 mm. Bekas, sepenuhnya berfungsi. Fgsdpfxjyk T Hdj Aaqsb