Beli Wemas Vzg 65A bekas (93)

Kondisi: diremajakan ulang (bekas), kapasitas baterai: 465 Ah, tegangan baterai: 48 V, tinggi total: 784 mm, panjang total: 1.035 mm, lebar total: 353 mm, Tested forklift battery for your lift truck – 48V 3PZS 465Ah – DIN B + 1 year warranty + Includes Aquamatik system + Includes end discharge device & REMA 320 plug (other plug types available on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,035 mm Width 353 mm Height 784 mm Weight: approx. 770 kg Compatible with the following models and others: Linde A (1120) – 5022-00 Linde E 15 C – 322-00 Linde E 18 Z – 322-00 Linde R 10 BN – 1120-00 Kljdpfxjy Rnk Ee Ah Tsu Linde R 10 CN – 1120-00 Linde R 10 N – 1120-00 Linde R 10 N – 1120-00 – front-side exchange Linde R 12 BN – 1120-00 Linde R 12 CN – 1120-00 Linde R 12 N – 1120-00 Linde R 12 N – 1120-00 – front-side exchange Linde R 12 N – 136-00 Linde R 14 – 1120-00 Linde R 14 – 376-00 Linde R 14 CN – 1120-00 Linde R 14 N – 1120-00 Linde R 14 N – 1120-00 – front-side exchange Linde R 14 S N ACTIVE – 115-12 Linde R 14 SN – 115-08 Linde R 16 AS 1140 – 1120-00 Linde R 16 CN – 1120-00 Linde R 16 N – 1120-00 Linde R 16 N – 1120-00 – front-side exchange Linde R 16 N – 113-00 Linde R 16 N – 115-00 Linde R 16 N HD – 1120-00 – front-side exchange Linde R 16 SN – 115-08 Linde R 16 SN – 115-12 Linde R 20 – 1120-00 Linde R 20 W – 1120-00 Linde V – 5213-00 Linde V 10 E – 146-00 Linde V MODULAR – 5213-00 Crown ESR 5220-1.4 Still FM 14 N Jungheinrich ET 110 Jungheinrich ET 112 Jungheinrich ETV Jungheinrich ETV 110 Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV Q TCM RTL140 Other common battery sizes available on request. Delivery possible.

Kondisi: diremajakan ulang (bekas), kapasitas baterai: 465 Ah, tegangan baterai: 48 V, tinggi total: 778 mm, panjang total: 1.220 mm, lebar total: 273 mm, Tested forklift battery for your forklift – 48V 3PZS 465AH – Special tray + 1-year warranty + Includes aquamatic water filling system + Includes end connector & REMA 320 plug (other plugs available upon request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,220 mm Width: 273 mm Height: 778 mm Weight: approx. 730 kg Suitable for the following models and others: Still FM-X 12 Still R 60-25 Jungheinrich ETM 214 Heli CPD 10 Heli CPD 15 Toyota 6FBRE14 Toyota 7FBRE16 Toyota 7FBRE16N Toyota/BT OME 100 H Toyota/BT OP 1000 SE Toyota/BT OPW 1200 HSE Toyota/BT RR-B 1 Toyota/BT RR-M 14 Toyota/BT RRE 140 Toyota/BT RRE 140 E Toyota/BT RRE 140 M Toyota/BT RRE 160 Toyota/BT RRE 160 M Crown ESR 5240 Caterpillar NR14N2 Cesab R112 Doosan B15NS Doosan B18NS Ksdpfx Ahey Rnkxj Tolu Doosan B20NS Hubtex EASY Hyundai 16BRJ-9 Rocla HS14F Rocla TEF14 Rocla TEF25 Sichelschmidt 5929 Sichelschmidt M925 Sichelschmidt M930 Common battery sizes available on request. Transport possible.

Tahun pembuatan: 2020, Kondisi: bekas, 3233 Horizontal Drilling Machine Wema Probst QBV 200 Kodpfxswt Abwj Ah Telu Used, year of manufacture 2020 The machine is in as-new condition, with fewer than 30 drilling operations performed. Designed for making transverse milling and drilling operations in round-milled or profiled timber. This machine allows for the production of form-fit connections in round timber with three-dimensional manual adjustment. Typical applications include corner joints for log houses, timber frame structures, or products in the "garden wood" sector such as fences, carports, planters, raised beds, safety barriers, etc. The horizontal drilling machine consists of a base frame with welded steel construction, a swiveling drilling device, gas spring-assisted drilling column, and an adjustment system for positioning the drilling column. The timber is clamped with two centering vices. With the special tool (circular saw), asymmetric or end-face machining can be carried out. The machine also allows for drilling 90° holes of up to 120 mm diameter in timber using flat drills. Accessories: Collet chuck for 25 mm tool shank diameter, no tools included Timber diameter: 60 - 200 mm Adjustment range of the tool: - +/- 60° for 60 mm diameter - +/- 45° for 80–140 mm diameter - +/- 30° for 160–200 mm diameter Motor power: 2.2 kW Speed: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm (L x W x H) Weight approx. 380 kg Sale on behalf of customer, ex location near 46026 Valencia (Spain), without dismantling, transport, or installation included Dismantling, loading, and transport by us available as an option Subject to prior sale and errors in description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by prior appointment. Sale as is Technical data, condition description, year of manufacture, and scope of delivery as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the sale is made on an “as seen and inspected” basis Pictures and videos serve as examples and do not represent the actual delivery scope Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery conditions: ex location

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, daya: 17 kW (23,11 hp), jenis arus masuk: tiga fasa, gaya penekanan: 160 t, panjang langkah: 500 mm, kecepatan operasi: 200 mm/dtk, kecepatan mundur: 125 mm/dtk, lebar meja: 900 mm, panjang meja: 630 mm, kedalaman tenggorokan: 800 mm, lebar pelat tuas: 700 mm, panjang pelat penekan: 450 mm, kapasitas tangki oli: 500 l, panjang total: 22.000 mm, lebar total: 12.500 mm, tinggi total: 34.500 mm, berat keseluruhan: 7.000 kg, tekanan kerja: 160 batang, tinggi pemasangan: 800 mm, tekanan: 250 batang, Press hidrolik PYE 160 S/1M. Tahun produksi 1984. Produsen VEB Wema Zeulenroda (Jerman). Mesin telah menjalani pemeriksaan menyeluruh. Spesifikasi: Gaya tekan maksimum 160 ton. Tekanan kerja 16 MPa. Meja atas 700 x 450 mm. Meja bawah 900 x 630 mm. Celah bebas 800 mm. Langkah silinder 500 mm. Kecepatan turun 200 mm/dtk. Kecepatan naik 125 mm/dtk. Kebutuhan daya 17 kW. Kapasitas oli dalam tangki 500 l. Berat 7000 kg. Tinggi 3450 mm, panjang 2200 mm, lebar 1250 mm. Mesin dalam kondisi sangat baik. Dapat dilakukan inspeksi dan pengujian mesin saat beroperasi. Kodpfxoqy E I Ro Ah Tslu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, daya: 8,75 kW (11,90 hp), gaya penekanan: 25 t, panjang langkah: 500 mm, kecepatan operasi: 100 mm/dtk, kecepatan mundur: 450 mm/dtk, lebar meja: 630 mm, panjang meja: 500 mm, lebar pelat tuas: 450 mm, panjang pelat penekan: 360 mm, jarak antara tiang: 800 mm, panjang total: 16.500 mm, lebar total: 10.500 mm, tinggi total: 27.500 mm, berat keseluruhan: 2.200 kg, langkah bantalan cetakan: 160 mm, Hydraulic press PYE 25 S1M dengan ejector. Tahun produksi 1987. Produsen: VEB Wema Zeulenroda (Jerman). Spesifikasi: Gaya tekan maksimum 25 ton. Tekanan kerja 16 MPa. Meja atas 450 x 360 mm. Meja bawah 630 x 500 mm. Jarak bebas 800 mm. Langkah silinder 500 mm. Kecepatan turun 100 mm/dtk. Kecepatan naik 450 mm/dtk. Gaya ejector bawah 10 ton. Langkah ejector bawah 160 mm. Kebutuhan daya 8,75 kW. Berat 2200 kg. Tinggi 2750 mm, Panjang 1650 mm, Lebar 1050 mm. Kondisi teknis mesin sangat baik, setelah overhaul menyeluruh. Mesin dapat dilihat dan diuji saat beroperasi. Ksdpfx Aotzwxdeh Tjlu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1977, Fungsionalitas: berfungsi sepenuhnya, daya: 12,5 kW (17,00 hp), gaya penekanan: 25 t, panjang langkah: 500 mm, kecepatan operasi: 200 mm/dtk, kecepatan mundur: 450 mm/dtk, lebar meja: 630 mm, panjang meja: 500 mm, lebar pelat tuas: 450 mm, panjang pelat penekan: 360 mm, panjang total: 16.500 mm, lebar total: 10.500 mm, tinggi total: 27.500 mm, berat keseluruhan: 2.400 kg, jarak antara penyangga: 800 mm, Hydraulic Press PYE 25 SS. Year of manufacture: 1977. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: - Maximum pressing force: 25 tons - Working pressure: 16 MPa - Upper table: 450 x 360 mm - Lower table: 630 x 500 mm - Daylight: 800 mm - Cylinder stroke: 500 mm Kljdpotzxvwefx Ah Tju - Downward speed: 200 mm/sec - Upward speed: 450 mm/sec - Power requirement: 12.5 kW - Weight: 2,400 kg - Height: 2,750 mm; Length: 1,650 mm; Width: 1,050 mm The machine is in very good technical condition, after a major overhaul. It is possible to inspect and test the machine under power.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1986, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 40 t, panjang langkah: 500 mm, kecepatan operasi: 100 mm/dtk, kecepatan mundur: 450 mm/dtk, lebar meja: 630 mm, panjang meja: 500 mm, lebar pelat tuas: 450 mm, panjang pelat penekan: 380 mm, kapasitas tangki oli: 300 l, panjang total: 1.150 mm, lebar total: 1.750 mm, tinggi total: 3.050 mm, berat keseluruhan: 3.200 kg, jarak antara penyangga: 800 mm, Perlengkapan: dokumentasi / manual, Hydraulic Press PYE 40 S1/M with Ejector. Year of manufacture: 1986. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Piston seal replaced. Specifications: - Maximum pressing force: 40 tons - Operating pressure: 16 MPa - Upper table: 380 x 450 mm Klsdpfowbt Uqex Ah Teu - Lower table: 500 x 630 mm - Clearance: 800 mm - Cylinder stroke: 500 mm - Downward speed: 100 mm/sec - Upward speed: 450 mm/sec - Ejector stroke: 200 mm - Ejector force: 16 tons - Power requirement: 13 kW - Weight: 3180 kg - Height: 3050 mm, Length: 1750 mm, Width: 1150 mm The technical condition of the machine is very good. The machine has undergone a major overhaul. Inspection and operation demonstration possible.

Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 13214814, Fungsionalitas: berfungsi sepenuhnya, daya: 11 kW (14,96 hp), jenis arus masuk: tiga fasa, gaya penekanan: 250 t, tahun perombakan terakhir: 2010, Perlengkapan: dokumentasi / manual, Press hidrolik 250 T - berfungsi penuh, produksi bekas DDR, nama VEB Wema Zeulenroda Kljdpfx Aszbyxnoh Tsu

Kondisi: baru, Bumper, corner guard, upright protector for warehouse racking. The Mega-M warehouse rack upright bumper is made of steel, painted yellow. It features four mounting holes for permanent installation in the floor and side holes for attaching, e.g., horizontal beams. The bumper increases safety for forklift traffic in the warehouse, reducing the risk of costly rack repairs. - Manufactured from yellow-painted steel. - Universal and easy to install. - Front-mounted on the rack upright. - Enables the attachment of horizontal beams. - Used in industry to protect racks from mechanical damage. - Improves safety and reduces warehouse maintenance costs. The offer concerns the upright bumper: Item code: MTP001334 Kjdjm Sg Dhjpfx Ah Tjlu • Height: 400 mm • Width: 170 mm • Length: 300 mm • Sheet thickness: 4 mm • Mounting hole diameter: 15 mm • Color: yellow RAL1023 • Pallet quantity: 108 pcs Net price: 11 euros/piece. We offer a wide selection of both new and used racking components: frames, beams, and shelf inserts, including cross beams, WEMA mesh decks, wire mesh shelves, and chipboard decking. The listed prices apply to wholesale quantities for export outside Poland. Please contact us for details. For wholesale and retail pricing within Poland, please inquire. * The above price applies for purchases of at least one pallet. * Delivery available across Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Kondisi: bekas, Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10258-1, Karakteristik teknis: # Kapasitas muatan: Ukuran keranjang 180x170 mm, tinggi sekitar 150 mm # Kapasitas tangki: 1 tangki 775 L # Kapasitas ruang pencucian: 790L # Kecepatan konveyor: sekitar 0,4 m/menit Klsdpjxxkk Iofx Ah Tsu # Berat rata-rata beban sekitar 50 kg; maksimum 100 kg # Berat mekanis: 4.500 Kg Peralatan listrik # Tegangan operasi: 400Vx3 # Daya koneksi: 35 kW / arus nominal 65A Dimensi # Dimensi mesin (P×L×T): 4.000 × 2.000 × 2.000 mm ; Peralatan terdiri dari: # Mesin utama LPW, pemuatan/pembongkaran manual (tinggi pemuatan sekitar 930 mm) # SEPARATOR TIGA FASA sekitar 100 L/jam untuk pemisahan minyak # Performa: Tekanan semprot maks. 5,0 bar Status mesin : BERFUNGSI

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, jam operasional: 12 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 360 mm, jarak lintasan sumbu Y: 270 mm, jarak gerak sumbu Z: 270 mm, berat benda kerja (maks.): 500 kg, tinggi total: 2.500 mm, lebar total: 1.600 mm, panjang total: 2.000 mm, lebar meja: 550 mm, panjang meja: 350 mm, masa garansi: 12 bulan, tegangan masuk: 400 V, EDM 310MF30, year 2024, Completely Overhauled Technical Data: Travel X x Y x Z: 360 x 270 x 270 mm Worktable: 550 x 350 mm Work tank: 770 x 520 mm Distance table/quill min./max.: 160/430 mm Electrode weight: 25 kg Workpiece weight: 500 kg Filling height of work tank: 300 mm Power supply: 400V 3-phase, 50/60 Hz Power consumption: 6 KVA Machine dimensions (W x D x H): 2040 x 1600 x 2670 mm Equipment: MF30 operator interface Touchscreen display Erosion generator 65A Handheld control panel with enabling switch Klsdpfowga H Rox Ah Teu Integrated cooling unit C-axis 30 rpm, holding brake Flushing/suction table and head Cartridge filter system, new filter Work pump Steel table with T-slots CO² extinguishing system, new TÜV inspection 20-position tool changer Automatic quick-clamping chuck Erowa ITS 12 months warranty Transport, installation and commissioning on site, training Option: 1. New APC910/2 control (win10), MF30 operator interface 2. exopuls+ 60A generator

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Mesin telah diservis dan diperiksa secara menyeluruh Lebar kerja: 1100 mm Tinggi kerja: 140 mm Pengaturan tinggi: elektrik Tampilan ketebalan benda kerja: digital Unit: 2 Unit 1: Unit kombinasi (rol - sepatu) dengan sepatu amplas segmen elektronik Unit 2: Unit sepatu, sepatu segmen elektronik Dengan sabuk transport vakum Sikat penghilang debu: ya Daya motor: 2 x 15 kW Konsumsi arus: 65A Koneksi ekstraksi: 4 x 200 mm Belt amplas: 1120 x 1900 Berat: 3500 kg Ksdpfow I U N Isx Ah Telu Ketersediaan: segera Lokasi penyimpanan: Hochheim

Tahun pembuatan: 2025, Kondisi: baru,

Kondisi: bekas, Forklift Battery Charger, Industrial Charger, Forklift Battery Charger, Industrial Charger, Silicon Rectifier - Manufacturer: Jungheinrich, Charger Type Timetronic E230 G 24/65 B-ET - Input voltage: 230 V, 50-60 Hz - Output: 24 V / 65 A Kljdpfx Aheizk Rts Teu - Quantity: 1x charger available - Dimensions: 500/490/H735 mm - Weight: 53 kg

Tahun pembuatan: 2019, Kondisi: sangat baik (bekas), gripper-de-spec-sheet Klsdpfx Aew Rnfush Tou

Kondisi: bekas, en001 Kjdpfx Ahsx Igwrs Tjlu

Kondisi: bekas, Double-sided STOW Cantilever Racks – Used – Excellent Condition. The STOW wall-mounted cantilever rack is constructed from robust, solid steel profiles (I-beams) with high load capacity. It is equipped with 5 arms. The cantilever rack can be extended with additional sections (modules), allowing it to be adapted to evolving warehouse requirements. The offer concerns single-sided STOW cantilever racks, available as 1 or 2 modules: Item Code: MPP001693 Height: 750 cm Depth: 267 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Beam section height: IPE 270 mm Net price: €1,069.00 per module/section. Kodpfsx Ig Hmjx Ah Tolu Item Code: MPP001694 Height: 750 cm Depth: 270 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Beam section height: IPE 300 mm Net price: €1,239.00 per module/section. Item Code: MPP001695 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Beam section height: IPE 330 mm Net price: €1,569.00 per module/section. Item Code: MPP001699 Height: 750 cm Depth: 267 cm Bay width: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Beam section height: IPE 270 mm Net price: €2,079.00 for 2 modules/sections. Item Code: MPP001700 Height: 750 cm Depth: 270 cm Bay width: 100 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Beam section height: IPE 300 mm Net price: €2,479.00 for 2 modules/sections. Item Code: MPP001701 Height: 750 cm Depth: 353 cm Number of levels: 0 + 5 Load capacity per arm: 1,000 kg Beam section height: IPE 300 mm Net price: €3,139.00 for 2 modules/sections. Additionally, we stock large quantities of warehouse racking systems from various manufacturers such as MECALUX, STOW, MAGO, BITO, SCHÄFER, WDX, SLP, DEXION, PROMAG, etc. All units are high load capacity, available, undamaged, and in very good technical condition. We also offer a wide range of compatible accessories, including cross beams, mesh shelves, WEMA grating, bumpers, installation anchors, etc. Goods can be collected from our warehouse in Chmielów 39-441, Poland, either with your own transport or via arranged shipping. * Large quantities available. * Delivery possible across Europe. * Location: Poland.

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Wema Probst RHM 250 II-H milling machine – NEW - Diameters from 100mm to 250mm - Electronic feed adjustment - 2 milling heads Ksdpfxjubbrys Ah Tolu - Head 1: diameter 150–300mm - Head 2: diameter 100–250mm - Feed rate 6–34m/min - Complete electrical cabinet and control panel