Pengepres hidrolik dengan ejektor

WMW Zeulenroda PYE 40 S1M

Kondisi: bekas, Tahun pembuatan: 1997, druck-40-t Nwodpfxsvuuckj Abuob

Kondisi: bekas, Technical Details: Pressing force: 100 t Njdpfovc Ax Njx Abuewb Installation height (table/ram, top): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 200 mm/s Ram speed, return: 200 mm/s Table size (L x W x H): 750 x 560 x 90 mm Table opening: Ø 26 mm Ram clamping surface (W x D): 530 x 400 mm Ram bore (diameter): Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor level: 720 mm Total power requirement: 17.0 kW Approx. machine weight: 5.5 t Approx. machine dimensions (L x W x H): 1.8 x 1.2 x 3.2 m

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: Pressing force: 160 t Throat depth: 360 mm Ram stroke – max.: 500 mm Distance table to ram: 800 mm Clamping plate on table: 1250 x 630 x 100 mm Pass-through openings in table: 4x Ø 62 mm Ram advance speed: 200 mm/s Ram return speed: 125 mm/s Ram surface: 450 x 850 mm Nsdpfx Asu Nfvuebuewb Pin hole in ram: Ø 49 mm Height above floor: 810 mm Total connected load: 17 kW Machine weight approx.: 7,200 kg Machine dimensions (LxWxH) approx.: 2.1 x 1.4 x 3.4 m Manual counter In stock

Kondisi: bekas, Tahun pembuatan: 1986, Tekanan 160 t Jangkauan 360 mm Langkah 500 mm Kecepatan turun 200 mm/detik Kecepatan naik 125 mm/detik Jarak maksimum meja - penekan 1000 mm Dimensi meja 900 x 630 mm Nodpfov Rgwxox Abujwb Dimensi penekan 850 x 450 mm Diameter x Kedalaman pin penjepit 50 H7 / 85 mm Kebutuhan daya total 17 kW Berat mesin kira-kira 7 t Kebutuhan ruang sekitar PxLxT 1,25 x 2,2 x 3,45 m

Kondisi: baik (bekas), en-GB: Manufacturer: WMW Zeulenroda Model: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height: 850 mm Bolster plate thickness: 100 mm Throat depth (C side): 360 mm Specifications Metric | US Standard Capacity: 160,000 Table length: 1,250 mm Table width: 600 mm Ram stroke: 500 mm Approach speed: 100 mm/min Nedpfxowp Nv He Abuewb Working speed: 10 mm/min Return speed: 125 mm/min Motor power: 22.5 kW Dimensions (approximate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations are implied. We recommend verifying all critical details.

Kondisi: bekas, Technical Details: Pressing force: 25 t Stroke: 500 mm Installation height (table/ram at top position): 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.100 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 75 mm Passage in table: Ø 180 mm Clamping surface of ram: 450 x 360 mm Ram bore (pin hole): Ø 32 mm Height above floor level: 710 mm Total connected load: 8.75 kW Approx. machine weight: 2.2 t Approx. dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Njdpfxovc Awxe Abuswb Operation via two-hand control panel (and one-hand operation in setup mode) Continuous and single stroke operation

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 27.500 mm, lebar total: 10.500 mm, panjang total: 16.500 mm, gaya penekanan: 25 t, lebar meja: 630 mm, panjang meja: 500 mm, kecepatan operasi: 100 mm/dtk, berat keseluruhan: 2.200 kg, kecepatan mundur: 450 mm/dtk, lebar pelat tuas: 450 mm, panjang pelat penekan: 360 mm, langkah bantalan cetakan: 160 mm, jarak antara tiang: 800 mm, panjang langkah: 500 mm, daya: 8,75 kW (11,90 hp), Hydraulic press PYE 25 S1M. Year of manufacture: 1990. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: - Maximum pressing force: 25 tons Nsdpfotzwxdjx Abuewb - Operating pressure: 16 MPa - Upper table: 450 x 360 mm - Lower table: 630 x 500 mm - Clearance: 800 mm - Cylinder stroke: 500 mm - Downward speed: 100 mm/sec - Upward speed: 450 mm/sec - Power requirement: 8.75 kW - Weight: 2200 kg - Height: 2750 mm, Length: 1650 mm, Width: 1050 mm Technical condition: Very good. The machine has undergone a complete overhaul. Inspection and testing under power are possible.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, tinggi total: 34.500 mm, tinggi pemasangan: 800 mm, lebar total: 12.500 mm, panjang total: 22.000 mm, kedalaman tenggorokan: 800 mm, gaya penekanan: 160 t, lebar meja: 900 mm, panjang meja: 630 mm, kecepatan operasi: 200 mm/dtk, berat keseluruhan: 7.000 kg, kecepatan mundur: 125 mm/dtk, lebar pelat tuas: 700 mm, panjang pelat penekan: 450 mm, jenis arus masuk: tiga fasa, panjang langkah: 500 mm, tekanan kerja: 160 batang, tekanan: 250 batang, kapasitas tangki oli: 500 l, daya: 17 kW (23,11 hp), Press hidrolik PYE 160 S/1M. Tahun produksi 1984. Produsen VEB Wema Zeulenroda (Jerman). Mesin telah menjalani pemeriksaan menyeluruh. Spesifikasi: Gaya tekan maksimum 160 ton. Tekanan kerja 16 MPa. Meja atas 700 x 450 mm. Meja bawah 900 x 630 mm. Celah bebas 800 mm. Langkah silinder 500 mm. Kecepatan turun 200 mm/dtk. Kecepatan naik 125 mm/dtk. Kebutuhan daya 17 kW. Kapasitas oli dalam tangki 500 l. Berat 7000 kg. Tinggi 3450 mm, panjang 2200 mm, lebar 1250 mm. Mesin dalam kondisi sangat baik. Dapat dilakukan inspeksi dan pengujian mesin saat beroperasi. Nwodpjqy E I Rofx Abueb

Kondisi: bekas, Tahun pembuatan: 1991, nomor mesin/kendaraan: 041-024/39, Presskraft: 63 t Nodpfjvai R Tjx Abuswb

Kondisi: bekas, Pressure 25 t Stroke 500 mm Throat depth 355 mm Installation height 800 mm Table surface 500 x 500 mm Nwedpfx Asvzxq Sebueb Table height above floor 700 mm Ram area 250 x 250 mm Drive power 7.5 kW Weight 2.1 t Space requirement approx. 1.45 x 0.9 x 2.55 m (LxWxH) Throughhole in table 180 mm Permitted only for safe tools or with fixed guard according to German Safety Regulations (UVV) With oil-hydraulic drive, upper and lower stroke limitation, manual lever As is, where is, WITHOUT commissioning, in current condition