Beli Bystronic / Lenhardt 4000 X 1600, Igu Line – Double Gas Press bekas (80.972)

Tahun pembuatan: 2013, Kondisi: bekas, Technical specifications for the bale opener line for RDF, MSW, paper, cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of manufacture: 2015 Number of opened bales: 674 pcs Operating time: only 3 days, exclusively for commissioning the entire system upon initial installation Opening cycle: approx. 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Maximum bale weight: 2,000 kg Conveyor height: 1,400 mm Maximum conveyor width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opener line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Operator display: SIEMENS SIMATIC HMI Touch Control system: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of delivery: - Infeed conveyor 3,500 x 1,200 x 1,400 mm - Feed conveyor to opener 1,500 x 1,200 x 1,400 mm - Bale opener (gripper with knife) Special equipment: - Oil heater in hydraulic oil tank - Control cabinet heater - Oil cooler for hydraulic unit Explanation for the short operating period: The complete Cross Wrap bale opener line type BO 4000 was installed in 2015 at a municipal waste incineration plant. The background for the installation was to ensure that in case of a malfunction or during maintenance of the incineration plant, municipal waste could still be received, compacted, wrapped, and stored, until normal operations resumed. Afterwards, all bales could be opened and the waste fed into the standard incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and has never been used in regular operation since. Only during the commissioning and initial trial runs in 2015 were 674 bales opened over a period of three days. The system is in excellent, immediately operational condition. Due to reconstruction work at the incineration plant, the installation site of the bale opener was required for other purposes. Therefore, the complete line is now available for sale. Brief description of the bale opening process: Bwjdpfou Tg I Dsx Am Ten Pressed bales are placed onto the feed conveyor from the side or from behind using a forklift truck. For opening, the bales must be positioned so that the wire or twine strapping runs horizontally to the conveyor; otherwise, the bales must be rotated by 90°. The infeed conveyor advances one bale at a time to the cutting unit. The gripper holds the wires or twine strapping firmly. The rotating knife cuts the bale longitudinally. Afterwards, the gripper returns to its home position. The opened bale is then conveyed to the discharge chute and falls onto the downstream conveyor technology. Remarks: Original purchase price of the entire system: €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic diagrams) is available. The system has been dismantled into shipping units, placed in storage, and is available at short notice for inspection and loading. We accept no liability for the technical data provided or for any potential errors.

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, model controller: Rexroth IndraMotion MTX, jenis laser: Laser CO₂, daya laser: 4.000 W, gaya punching: 22 t, Perlengkapan: Penandaan CE, alat penukar nosel, penghadang cahaya keselamatan, en Bedpoza A Hlofx Am Town

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 100 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 40 mm, panjang pelat penekan: 2.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B100-2100 – 100 Ton x 2100 mm CNC Hydraulic Press Brake Standard Features Stroke: 260 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance Between Uprights: 1600 mm ESA S630 CNC Control Unit (3-4 Axes) 10” 2D Touch Graphic Display Manual bending sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CT-BEND Servo Motorized X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Accuracy: ±0.05 mm Manual R-axis movement: 250 mm Heavy-duty steel frame construction Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis travel Backgauge Fingers 2 units Flat type 3-stage (10 mm / 20 mm / 30 mm) Manual Z-axis movement Sheet sag prevention structure European Type Quick-Release Tool Clamping System (Promecam E7) Quick die change Safe operation Practical and time-saving structure CRONOSSTECH Special Narrow Bottom Table 70 mm or 90 mm bottom table (bed) T-slot can be applied according to tools to be used Standard Upper Punch ES1260 Punch height: 67 mm Punch angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Meter Compatible with Amada Standard Lower Die ES2067 4-way V-opening (16-22-35-50 mm) Bedpfozbrf Tox Am Town Die height: 60 mm Die angle: 85° Material: C45 Maximum capacity: 80 Tons/Meter Compatible with Amada B Series Open Frame Design Black plexiglass protective panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting Electrical panel to VDE standards Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic manifold Eckerle hydraulic pump Siemens drive Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Integrated measuring scale Provides operator support Optional Features CT-BEND Servo Motorized X + R Axis Backgauge System Servo motor controlled X and R axis motion X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers Finger protection system Laser-based safety system Enhances operator safety CE compliant Maximum working distance: 4.3 meters Delem DA66T CNC Control Unit (17” Touchscreen) 17” 2D touch graphic display 2D drawing and 3D product simulation User-friendly interface 1 GB hard disk Automatic bending sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction Windows-based operating system 2 USB ports Data backup Offline Profile-TL programming feature Technical Specifications Bending Force: 100 Tons Bending Length: 2100 mm Distance Between Uprights: 1600 mm Stroke: 210 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 5000 kg Main Motor Power: 5.5 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 5,5 kW (7,48 hp), gaya penekanan: 60 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 135 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 2.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B60-2100 – 60 Ton x 2100 mm CNC Hydraulic Press Brake The HPB B60-2100 CNC Hydraulic Press Brake, manufactured by CRONOSSTECH in Turkey, is specifically designed for precise sheet metal bending applications, featuring a bending force of 60 tons and a bending length of 2100 mm. Standard Features Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Bending Length: 2100 mm Distance Between Columns: 1600 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D touch graphic display Manual bend sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 USB ports Offline programming software CRONOSSTECH Servo-driven X-Axis Backgauge System X-axis travel: 750 mm Speed: 250 mm/s Precision: ±0.05 mm Manual R-axis movement: 250 mm Steel frame construction Hardened ball screw Hardened linear guide system Optional 1000 mm X-axis Backgauge Fingers 2 pieces Flat type 3 steps (10 mm / 20 mm / 30 mm) Manual Z-axis movement Anti-sag design for large sheets European Type Quick Tool Clamping System (Promecam E7) Quick tool change Safe operation Practical and time-saving structure CRONOSSTECH Special Narrow Lower Table 70 mm or 90 mm lower table T-slot option available based on tooling Standard Upper Tool ES1260 Tool height: 67 mm Tool angle: 85° Radius: 0.8 mm Material: C45 Maximum capacity: 100 Tons/Metre Compatible with Amada Standard Lower Tool ES2067 4-channel V grooves (16-22-35-50 mm) Tool height: 60 mm Tool angle: 85° Material: C45 Maximum capacity: 80 Tons/Metre Compatible with Amada B Series Open Frame Design Black plexiglass safety panels Wide field of view Professional appearance Ergonomic design Additional Equipment Single pedal system (P2) GIVI linear scales Upper beam LED lighting VDE-compliant electrical panel Schneider or Siemens electrical components Hoerbiger (HAWE) hydraulic block Eckerle hydraulic pump Siemens drive Energy-saving standby function Front Support Arms 2 standard sliding front support arms Height adjustable Ruler-based measuring system Operator support Optional Features Servo-driven X + R-axis Backgauge System Servo-driven movement for X and R axes X-axis travel: 750 mm Accuracy: ±0.05 mm X-axis extendable up to 1000 mm AKAS II Front Safety Laser System + Rear Light Barriers Finger protection system Laser-based safety system Enhanced operator safety CE conformity Max operating distance: 4.3 metres Delem DA53Tx CNC Control Unit (15” Touch) 15” color touch screen 2D part drawing and simulation Angle correction calculation Angle measurement and correction USB data transfer Data backup Offline profile-TL programming Remote access and diagnostics Technical Specifications Bending Force: 60 Tons Bending Length: 2100 mm Distance Between Columns: 1600 mm Stroke: 260 mm Open Height (Daylight): 465 mm Throat Depth: 410 mm Table Height: 870 mm Machine Length: 3660 mm Machine Width: 2175 mm Machine Height: 2820 mm Approach Speed: 160 mm/s Return Speed: 135 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 170 L Machine Weight: 4290 kg Bwsdpfxezbrfas Am Tjn Main Motor Power: 5.5 kW Backgauge X-Axis Speed: 300 mm/s Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 270 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 120 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 3.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B270-3100 – 270 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B270-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, has been developed for heavy industry, steel construction, machinery manufacturing, and precision sheet metal forming applications, offering a bending force of 270 tons and a bending length of 3100 mm. Standard Features - Stroke: 260 mm - Daylight (Open Height Between Upper and Lower Beams): 465 mm - Throat Depth: 410 mm - Bending Length: 3100 mm - ESA S830 CNC Control Unit (3-4 Axes) - 10” 2D Touch Graphic Screen - Manual bend sequence and collision control calculation - Automatic angle correction (crowning calculation) - Angle measurement and correction - 2D drawing support - 2 USB ports - Offline programming software - Servo Motorized X-Axis Backgauge System - X-axis travel: 750 mm - Speed: 250 mm/s - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Heavy-duty steel frame construction - Hardened ball screw - Hardened linear guide system - Optional 1000 mm X-axis Backgauge Fingers - 2 units - Flat type - 3-stage (10 mm / 20 mm / 30 mm) - Manual Z-axis movement - Structure prevents sheet sagging European Type Quick Clamping System (Promecam Type) - Fast tool change - Secure locking system - User-friendly operation European Type Narrow Lower Table - 70 mm or 90 mm special lower table - T-slot can be applied depending on tooling requirement Standard Upper Die ES1260 - Die height: 67 mm - Die angle: 85° - Radius: 0.8 mm - Material: C45 - Maximum capacity: 100 Ton/Meter - Amada compatible Standard Lower Die ES2067 - 4-channel V openings (16-22-35-50 mm) - Die height: 60 mm - Die angle: 85° - Material: C45 - Maximum capacity: 80 Ton/Meter - Amada compatible B Series Open Cabin Design - Black plexiglass safety panels - Wide viewing area - Professional appearance - Ergonomic design Additional Equipment - Single pedal system (P2) - GIVI linear encoders - LED lighting on upper beam - Electrical panel in accordance with VDE standards - Electrical components by Schneider or Siemens - High-quality hydraulic block system - Eckerle hydraulic pump - Siemens main drive Bwedpfxezbrc Sj Am Ton - Energy-saving standby function Front Support Arms - 2 standard sliding front support arms - Height adjustable - Metric ruler measurement system Optional Features - Servo Motorized X + R Axis Backgauge System - Servo controlled X-axis movement - X-axis travel: 750 mm - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Hardened linear guides and ball screw system - X-axis extendable up to 1000 mm - CNC Controlled Motorized Crowning System - Motorized wedge system - Automatic calculation by CNC - Faster setup times - Higher bending accuracy - Longer machine lifespan - Front Safety Laser System + Rear Light Curtains - Laser-based finger protection - Improves operator safety - Fast detection and response - Maximum working distance: 4.3 meters Technical Specifications - Bending Force: 270 Ton - Bending Length: 3100 mm - Distance Between Columns: 2600 mm - Stroke: 260 mm - Daylight: 465 mm - Throat Depth: 410 mm - Table Height: 960 mm - Machine Length: 4840 mm - Machine Width: 2500 mm - Machine Height: 3040 mm - Approach Speed: 150 mm/s - Return Speed: 120 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 290 L - Machine Weight: 12,300 kg - Main Motor Power: 22 kW - Backgauge X-Axis Speed: 300 mm/s - Backgauge R-Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, daya: 4 kW (5,44 hp), gaya penekanan: 40 t, panjang langkah: 210 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 120 mm/dtk, kedalaman tenggorokan: 410 mm, panjang pelat penekan: 1.250 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB A40-1250 – 40 Ton x 1250 mm CNC Hydraulic Press Brake Manufactured in Turkey by CRONOSSTECH, the HPB A40-1250 CNC Hydraulic Press Brake is engineered for precise sheet metal bending applications, offering 40 tons of bending force and a 1250 mm bending length. Equipped with the ESA S630 CNC control unit, servo-driven backgauge system, compact frame design, and professional tooling, it provides an efficient solution for workshops, metal fabrication companies, and industrial manufacturers. Standard Features Stroke: 210 mm Daylight (Open Height): 465 mm Throat Depth: 410 mm Bending Length: 1250 mm Distance Between Columns: 1100 mm ESA S630 CNC Control Unit (3-4 Axis) 10” 2D Touchscreen Graphic Display Manual bend sequence and collision control calculation Angle correction calculation (crowning) Angle measurement and correction 2D drawing support 2 x USB ports Offline programming software CRONOSS Servo Motorized X Axis Backgauge X axis travel distance: 750 mm Speed: 130 mm/s Accuracy: ±0.10 mm Manual R axis travel: 190 mm Steel frame construction Hardened ball screw spindle Linear guide system Optional 1000 mm X axis Backgauge Fingers Quantity: 2 Flat type 3-stage adjustable (10 mm / 20 mm / 30 mm) Manual Z axis movement European Style Manual Promecam Upper Tool Holder E7 Quick tool change Safe operation Design prevents die from falling CRONOSS Special Narrow Lower Table 70 mm or 90 mm lower table Optional T-slot upon request Standard Upper Die ES1260 Die height: 67 mm Die angle: 85° Radius: 0.8 mm Material: C45 Max capacity: 100 Ton/Metre Bedpfozbrcrjx Am Town Standard Lower Die ES2067 4-groove V opening (16-22-35-50 mm) Die angle: 85° Die height: 60 mm Material: C45 Max capacity: 80 Ton/Metre A Series Open Front Panel Enclosure CRONOSS Premium open cabin Wide field of view Ergonomic design Professional appearance Single Pedal System (P2) Encoder Linear Scales Top Beam LED Lighting VDE Electrical Panel Schneider or Siemens Electrical Components Hoerbiger (HAWE) Hydraulic Block Eckerle Hydraulic Pump Energy-saving Standby Function 2 Sliding Front Support Arms Height adjustable Rule (scale) measurement system Operator support system Optional Features AKAS II Front Safety Laser System + Rear Light Barriers AKAS® II laser safety system Finger protection system Laser guard at punch height Enhances operator safety CE compliance Max working distance: 4.3 meters Technical Specifications Bending Force: 40 Ton Bending Length: 1250 mm Distance Between Columns: 1100 mm Stroke: 210 mm Daylight: 465 mm Throat Depth: 410 mm Table Height: 885 mm Machine Length: 3060 mm Machine Width: 2195 mm Machine Height: 2730 mm Approach Speed: 150 mm/s Return Speed: 120 mm/s Bending Speed: 10 mm/s Oil Tank Capacity: 95 L Machine Weight: 3400 kg Main Motor Power: 4 kW Backgauge X Axis Speed: 300 mm/s Backgauge R Axis Speed: 250 mm/s

Kondisi: baru, Tahun pembuatan: 2026, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, panjang langkah: 260 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 200 mm/dtk, kedalaman tenggorokan: 410 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, HPB B100-3100 – 100 Ton x 3100 mm CNC Hydraulic Press Brake The HPB B100-3100 CNC Hydraulic Press Brake, manufactured in Turkey by CRONOSSTECH, is engineered for precise and repeatable sheet metal bending, featuring a bending capacity of 100 tons and a bending length of 3100 mm. Thanks to its ESA S830 CNC control unit, servo-driven backgauge system, high-rigidity frame construction, and professional tooling, it delivers high performance for metalworking and industrial production facilities. Standard Features - Stroke: 260 mm - Open height (Daylight): 465 mm - Throat Depth: 410 mm - Bending Length: 3100 mm - ESA S830 CNC Control Unit (3-4 Axis) - 10” 2D touchscreen graphical display - Manual bend sequence and collision check calculation - Angle correction calculation (crowning) - Angle measurement and correction - 2D drawing support - 2 x USB ports - Offline programming software - CRONOSS Servo Motorized X-R Axis Backgauge System - X-axis travel: 750 mm - X-axis speed: 250 mm/s - Accuracy: ±0.05 mm - R-axis travel: 250 mm - Robust steel frame - Hardened ball screw - Linear guide system - X-axis extendable up to 1000 mm (optional) - Backgauge Fingers: 2 units, straight type, 3 levels (10 mm / 20 mm / 30 mm) - Manual Z-axis adjustment - European Type Quick-Release Promecam Upper Tool Holder E7 Bsdpszbrb Ijfx Am Town - Quick tool change - Safe operation - Practical and ergonomic design - CRONOSS Special Narrow Bottom Table - 70 mm or 90 mm bottom table, depending on tonnage - T-slot available upon request - Standard Upper Die ES1260 - Die height: 67 mm - Die angle: 85° - Radius: 0.8 mm - Material: C45 - Max capacity: 100 Ton/Meter - Standard Lower Die ES2067 - 4-groove V-opening (16-22-35-50 mm) - Die angle: 85° - Die height: 60 mm - Material: C45 - Max capacity: 80 Ton/Meter - Series B Open Frame Cladding - CRONOSS premium open cabin - Black plexiglass safety panels - Wide field of vision - Ergonomic design - Single Pedal System (P2) - GIVI Linear Scales - LED Lighting - VDE Electrical Panel - Schneider or Siemens Electrical Components - Hoerbiger (HAWE) Hydraulic Block - Eckerle Hydraulic Pump - Siemens Drive - Energy saving standby function - 2 Standard Sliding Front Support Arms - Height adjustable - Ruler measurement system - Operator support system Optional Features - CT-BEND Servo Motorized X+R Axis Backgauge System - Fully automatic movement in X and R axes - Manual movement in Z1 and Z2 axes - X-axis extendable up to 1000 mm - CNC Controlled Motorized Crowning System - CRONOSS wedge system - G.E.C. motorized structure - Automatic calculation by CNC - More precise and homogeneous bending - No operator intervention required - AKAS FPSC Front Safety Laser System + Rear Light Curtain - CE compliant safety system - Finger protection function - Maximum working range: 4.3 meters Technical Specifications - Bending Force: 100 Ton - Bending Length: 3100 mm - Distance Between Columns: 2600 mm - Stroke: 260 mm - Open Height (Daylight): 465 mm - Throat Depth: 410 mm - Table Height: 905 mm - Machine Length: 4670 mm - Machine Width: 2230 mm - Machine Height: 2950 mm - Approach Speed: 200 mm/s - Return Speed: 135 mm/s - Bending Speed: 10 mm/s - Oil Tank Capacity: 180 L - Machine Weight: 6780 kg - Main Motor Power: 7.5 kW - Backgauge X Axis Speed: 300 mm/s - Backgauge R Axis Speed: 250 mm/s This machine is manufactured by CRONOSSTECH in Turkey. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, jenis aktuasi: hidrolik, produsen pengendali: ELGO, model controller: ELGO P40T 5,7 ", lebar kerja: 4.000 mm, laju langkah (min.): 12 rpm, ketebalan lembaran (maks.): 16 mm, ketebalan pelat baja (maks.): 16 mm, penyesuaian pengukur belakang: dikendalikan CNC, daya: 30 kW (40,79 hp), masa garansi: 12 bulan, Perlengkapan: Pelat tipe tersedia, Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, perlindungan jari, HGM B16-4000 – 16 mm x 4000 mm Hydraulic Guillotine Shear Manufactured in Turkey by CRONOSSTECH, the HGM B16-4000 Hydraulic Guillotine Shear is designed for heavy industry, steel construction, shipbuilding, machinery manufacturing, and high-capacity sheet metal processing applications, featuring a 16 mm cutting capacity and a cutting length of 4000 mm. Equipped with the ELGO P40T touch CNC control unit, automatic blade gap adjustment system, motorized backgauge, and Rexroth hydraulic system, it delivers precise and efficient cutting performance. Standard Features - Throat Depth: 250 mm - Cutting Length: 4000 mm - Distance Between Columns: 4580 mm - Cutting Capacity: 16 mm - ELGO P40T 5.7” Touch CNC Control Unit - 5.7” TFT touch screen - Manual operation mode - Single-piece processing - Program memory - Digital outputs up to 2A - Automatic calculation of blade gap, cutting angle, and hold-down adjustment based on material - Automatic cutting program - Rear Sheet Support System with RTS Function - Automatic Blade Gap Adjustment System - Automatic calculation and adjustment according to the sheet thickness to be cut - Programmable Backgauge Return System - Automatic lifting for parts over 1000 mm - X-Axis Motorized NC Controlled Backgauge - X-axis travel distance: 1000 mm - Speed: 150 mm/s - Precision: ±0.05 mm - Steel frame - Hardened ball screw - Front Support Arms - Length: 1000 mm - Ruler - T-slot - Swing-away stop - Front Finger Guard (Openable) - 1000 mm openable front guard cover - Upper Blade - 2 cutting edges - 450 N/mm² capacity - Lower Blade - 4 cutting edges - 450 N/mm² capacity - Foot Pedal with Emergency Stop - Rear Safety System (EOS2E 2BX) - 2 laser beams - Type 2 – SIL1 safety level - 510 mm monitoring height - 3 ms response time - IP65 / IP67 protection class - Shadow Line Cutting Light - Ball Transfer Table - Schneider or Siemens Electrical Components (400V / 50Hz) - Premium Front and Rear Cabinet Guards - Rexroth Hydraulic System - Energy Saving Standby Mode Optional Features Bwodpfxezbqzye Am Ton - Pneumatic Sheet Support System (Type 2 – 4 Position RTS Function) - 4-position pneumatic support system - Stable support for large sheets - Reduces sheet bending and deformation - RTS (Return To Sender) function - Enhances operator comfort and safety - Extended X-Axis Backgauge - 1250 mm - 1500 mm - Extended Front Support Arms - 1500 mm - 2000 mm - 3000 mm - Full-Length Openable Front Guard System Technical Specifications - Cutting Capacity (450 N/mm²): 16 mm - Cutting Capacity (700 N/mm²): 10 mm - Cutting Length: 4000 mm - Cutting Angle: 0.5° – 3.0° - Number of Hold-Down Cylinders: 18 - Cutting Speed / Fast Mode: 6 / 12 strokes per minute - Distance Between Columns: 4580 mm - Table Height: 1010 mm - Table Width: 700 mm - Throat Depth: 250 mm - Backgauge Stroke (X-Axis): 1000 mm - Machine Length: 5980 mm - Machine Width: 3750 mm - Machine Height: 2825 mm - Oil Tank Capacity: 390 L - Motor Power: 30 kW - Machine Weight: 21.5 Tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Kondisi: baru, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, produsen pengendali: ELGO, model controller: P40T 5.7”, lebar kerja: 4.000 mm, sudut pemotongan (min.): 2,1 °, laju langkah (min.): 15 rpm, ketebalan lembaran (maks.): 13 mm, ketebalan pelat baja (maks.): 13 mm, penyesuaian pengukur belakang: dikendalikan CNC, daya: 22 kW (29,91 hp), masa garansi: 12 bulan, Perlengkapan: Pelat tipe tersedia, Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, perlindungan jari, Key Advantages ✔ 13 mm sheet cutting capacity (450 N/mm²) ✔ 4000 mm cutting length ✔ ELGO P40T 5.7” touch NC control unit ✔ NC controlled motorized backgauge system ✔ Program memory ✔ Automatic cutting program ✔ Dual-speed cutting system ✔ Energy saving standby mode ✔ Rexroth hydraulic system ✔ Premium front and rear protective cabin system ✔ Transfer table and ball transfer system ✔ Shadow-line cutting illumination ✔ Heavy-duty steel frame construction Standard Features ELGO P40T 5.7” Touch NC Control Unit - 5.7” TFT touchscreen - Manual operation mode - Single piece processing mode - Program memory - Digital outputs up to 2A - Automatic calculation of angle, pressure, and blade clearance based on material thickness - Automatic cutting program - Sheet support system control - RTS (Return To Sender) function Manual Blade Clearance Adjustment System Programmable Backgauge Retract System Automatic lift-up function for parts longer than 1000 mm CRONOSSTECH X Axis Motorized NC Controlled Backgauge System - NC controlled automatic X-axis movement - 1000 mm travel distance - 150 mm/s speed - ±0.05 mm positioning accuracy - Steel construction body - Hardened ball screw shaft Front Support Arms - Length: 1000 mm - Ruler-based measurement system - T-slot design - Swing-away stoppers Foldable Front Finger Protection System - 1000 mm foldable front guard cover Upper Blade - 2 cutting edges - 450 N/mm² material capacity Lower Blade - 4 cutting edges - 450 N/mm² material capacity Foot Pedal - Special design pedal with emergency stop - Activates pressure cylinders and cutting movement simultaneously Rear Safety System (Excl. CE) Model: EOS2E 2BX - 2 laser beams - Type 2 – SIL1 safety level - 510 mm detection height - 3 ms response time - IP65 / IP67 protection class - Operating temperature: -30°C / +55°C - 24V DC power supply Emergency Stop Buttons Shadow-Line Cutting Indicator Ball Transfer Table Electrical Equipment - Schneider or Siemens - 400V / 50Hz CRONOSSTECH Premium Cabin System - Front and rear protective cabins - Wide field of vision - Ergonomic operation - Professional industrial design Hydraulic System - Rexroth hydraulic block - Dual-speed cutting system - Two different cutting speeds - High efficiency for short parts - High-speed operation up to 60% of maximum cutting capacity - Energy-saving standby mode Optional Equipment Automatic Blade Clearance Adjustment System - ELGO P40T touch control integration - Automatic blade clearance based on sheet thickness Pneumatic Sheet Support System Type 1 - Dual-position system Extended X Axis Backgauge - 1250 mm - 1500 mm Extended Front Support Arms - 1500 mm - 2000 mm - 3000 mm Full-Length Foldable Front Protection System Technical Specifications - Cutting Capacity (450 N/mm²): 13 mm - Cutting Capacity (700 N/mm²): 8 mm Bwodpfxezbqw Is Am Tsn - Cutting Length: 4000 mm - Cutting Angle: 1.8° - Number of Hold-Down Cylinders: 18 - Cutting Speed / Fast Mode: 9 / 15 spm - Distance Between Columns: 4310 mm - Table Height: 930 mm - Table Width: 660 mm - Throat Depth: 250 mm - Backgauge Travel (X): 1000 mm - Machine Length: 5665 mm - Machine Width: 3785 mm - Machine Height: 2380 mm - Hydraulic Oil Tank: 350 Litres - Motor Power: 22 kW - Machine Weight: 18.5 Tons

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, IN11803-37 Bwsdown Hfiopfx Am Tjn

Kondisi: bekas, de-to-hu-it-lt-lv-nb-nl-pl-0001 Bwsdpoyw Rvqofx Am Ton

Kondisi: bekas, gesamtpresskraft-1200t-23062024 Bedpfeyw R Adjx Am Tswn

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Shear Merek: SAGITA Kapasitas: 4000 x 8 Kapasitas stopper belakang: 1100 mm Dimensi: 4750 x 2250 x 1850 mm Bjdpfx Amsynglnj Tswn Berat: 12T Penyetelan celah antar pisau Stopper belakang ELGO Pendamping plat belakang

Kondisi: bekas, Tahun pembuatan: 1998, Technical Details: Swing diameter: 830 mm Turning length: 4,000 mm Bwodswwlt Rjpfx Am Ten Swing diameter over cross slide: 540 mm Spindle bore: 130 mm Speed range: 2 – 1,600 rpm Rapid traverse speed: 4 / 5 m/min Feed speed: 1 – 2,000 mm/min Total power requirement: 55 kW Machine weight approx.: 7.5 t Floor space required approx.: 7 x 2.2 x 2 m Equipped with R&D MTC-K cycle control MULTIFIX tool post, size D Coolant system

Kondisi: bekas, Tahun pembuatan: 1980, Detail teknis: Tekanan: sekitar 100 t Jarak antar tiang: 500 mm Lengan keluar ke tengah ram: 350 mm Tinggi pemasangan: 450+100 mm Langkah ram - min.: 26 mm Langkah ram - maks.: 152 mm Penyetelan ram: memungkinkan/possible mm Permukaan ram: 550 x 400 mm Meja pemasangan: 1020 x 710 mm Kebutuhan daya total: 10 kW Berat mesin kira-kira: sekitar 7 t Bsdpfxou Nfhde Am Town Kebutuhan ruang kira-kira: P:2,0 x L:1,7 x T:3,2 m - tanpa bantalan penarik Press dapat didemonstrasikan.

Kondisi: bekas, en_1 Bjdpfxovt Nvpe Am Tswn

Kondisi: bekas, Tahun pembuatan: 1997, Technical details: Pressure: 160 t Column spacing: 1000 mm Stroke: 250 mm Installation height: 600 mm Distance table/ram: 600 mm Table height above floor: 550 mm Table surface: 810 x 860 mm Ram clamping area (D x W): 720 x 580 mm with T-slots Total power requirement: 15 kW Machine weight approx.: 16.0 t Machine is not yet assembled. Pictures are from the sales location. Additional features: - Lateral passage (W x H): 520 x 620 mm - Front passage (W x H): 660 x 600 mm Equipment: - Walk-on platform = height above floor approx. 2400 mm; platform approx. 2700 x 2600 x 1050 mm - Hydraulic unit Bjdpfx Amou Nfmmo Tewn - Oil cooler as per description.

Kondisi: bekas, Technical Details: Press force: 20 t Ram stroke: 6 – 60 mm Throat depth: 176 mm Ram adjustment: 55 mm Strokes per minute: 155 spm Distance table/ram: 270 mm Clear opening width: 470 mm Table size: 300 x 450 mm Through hole in table: 90 mm Ram clamping area: 130 x 248 mm Tilting angle: 28° Ram bore: 25 x 65 mm Bwedpfx Amju Nflis Ten Table height above floor: 775 mm Required air pressure: 5.5 – 6 bar Total power requirement: 3.5 kW Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 1.3 x 1.1 x 1.95 m High-performance press Central lubrication with light barrier (monitored) Linuflex Stroke counter Additionally, a steel plate 315 x 400 x 50 mm with center hole Ø 63 mm

Kondisi: bekas, Tahun pembuatan: 1985, Technical details: Pressure: 100 t Strokes: 35-100 strokes/min Throat depth: 360 mm Bjdpou Nfh Djfx Am Tewn Ram adjustment: 20-130 mm Ram surface: 750x550 mm Clamping plate on table: 1000x640 mm Stroke adjustment: 90 mm Passage between uprights lengthwise/crosswise: 610x500 / 440x550 mm Installation height, table/ram bottom: 300 mm Total power requirement: 17.5 kW Machine weight approx.: approx. 7.0 t Machine dimensions (LxWxH): approx. 1.9x1.4x2.7 m - The ram plate features 5 longitudinal T-slots - Center hole = 50 mm This press is currently for sale without a control system. Optional completion can be provided upon customer request. Subject to prior sale.

Kondisi: bekas, Tahun pembuatan: 1990, Technical details: Pressure: 63 t Frame opening: 200 mm Stroke: 150 mm Installation height: 430 mm Strokes per minute: 400 spm T-slots H 12 650: 18 mm Table through-hole: 420 x 160 mm (W x L) Ram surface: 650 x 450 mm Control: Wanske Tronicpress CNC Clearance between uprights: 550 x 540 mm Tank capacity: 200 l Fixed ram stroke: 100 mm Ram diameter: 40 mm Table height above floor: 1000 mm Table: 600 x 450 mm Table height above floor with anti-vibration mounts: 880 mm Total power: 30 kW Machine weight approx.: 3.9 t Hydraulic punching press for precision work (high-speed press) Bwsdpfx Aou Icxqom Tsn - Suitable for punching, drawing, pressing, coin minting, bending, riveting, straightening, assembling - With hydraulic gripper feed unit type HS 150 and 7-roller straightening unit (synchronized) - Suitable for standard strips of approx. 0.4 mm - 2.5 mm thickness x approx. 160 mm width, as well as narrow strips up to approx. 4 mm thickness. Feed length can be freely adjusted via the control system. - With ram round column guide - With automatic central lubrication - High-speed: up to 400 strokes per minute - Motor-driven adjustable fixed stop (manually/motor-driven adjustable from below) - Operating modes: continuous stroke and/or single stroke Equipment: - 1x hydraulic power unit - 2x control cabinets Condition: Punch press has a control issue. Sale as is, as a donor for spare parts or as a replacement machine. In stock. *

Kondisi: bekas, Tahun pembuatan: 1964, en-GB_Technical_details_01 Bwodou Nfibjpfx Am Tjn

Kondisi: bekas, Detail teknis: Tekanan: 80 t Tinggi instalasi: 600 mm Langkah penekan: 200 mm Tekanan: 30 t Tinggi instalasi: 680 mm Langkah penekan: 300 mm Jarak antar rangka: 1060 mm Area penjepitan pelat dasar: 1060x600 mm Tinggi meja dari lantai: 720 mm Kecepatan penekan: Penekan/ Ram 1: 40 mm/dtk Kecepatan penekan: Penekan/ Ram 2: 95 mm/dtk Area penjepitan pelat dasar: Dm=150 mm Kebutuhan daya total: 13 kW Berat mesin sekitar: 4,5 t Kebutuhan ruang sekitar: P:1,6xL:1,1xT:3,4 m PRES PEMASANGAN - Pres dengan dua penekan 30t + 80t - Pengoperasian dengan pedal kaki Bedpfx Aju Nfnwem Tewn Pres tersedia untuk dijual di Leipzig, sesuai deskripsi, siap dikirim.

Kondisi: bekas, Detail teknis: Bedpfxou Icwts Am Tswn Tekanan: 80 t Jarak antar kolom: 880 mm Ketinggian pemasangan: 200 mm Ukuran meja: 880x300 mm Tinggi di atas lantai: 1000 mm Jarak antar kolom: 800 mm Kebutuhan daya total: sekitar 12 kW Berat mesin kira-kira: 2855 kg Kebutuhan ruang: P:1,4xL:1,65xT:1,9 m PRESS EMBOSSING - PUNCHING - Hot press (press pemanas) Area penggunaan: - misal untuk film, plastik, kertas, hardboard, dll. - Ukuran pelat stempel: 600x310 mm Perlengkapan: - Counter - k - Catu daya 380/415 V / 50 Hz Aksesori: - Pelat penahan untuk matris (600x300x90mm) tidak dapat dipanaskan. Dijual apa adanya.

Kondisi: sangat baik (bekas), NOMOR KATALOG 8008 SPESIFIKASI TEKNIS - area pemuatan: 2 - penjepit samping yang dapat diatur secara manual: 2x6 buah - penjepit atas pneumatik: 2x2 buah - panjang maksimum elemen yang direkatkan: 3000 mm - tinggi maksimum elemen yang direkatkan: 1000 mm - ketebalan maksimum elemen yang direkatkan: 100 mm - dimensi (p/l/t): 3000x1300x1650 mm - berat: sekitar 600 kg KEUNGGULAN – dua area kerja – panjang pengeleman 3000 mm – tidak dicat – mobil – dengan roda – mesin press bekas, kondisi sangat baik Bodpfx Amjy T Rdye Tjwn Harga netto: 12.900 PLN Harga netto: 3.071 EUR (berdasarkan kurs 4,20 PLN/EUR) (Harga dapat berubah tergantung fluktuasi kurs yang lebih besar)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 1.300 mm, panjang umpan sumbu Y: 320 mm, panjang umpan sumbu Z: 450 mm, tinggi total: 2.000 mm, lebar total: 2.100 mm, panjang total: 2.520 mm, lebar meja: 360 mm, panjang meja: 1.600 mm, jenis arus masuk: tiga fasa, beban meja: 500 kg, berat keseluruhan: 2.800 kg, tegangan masuk: 400 V, masa garansi: 12 bulan, Perlengkapan: dokumentasi / manual, Vertical Milling Machine Bedpfx Aoyuculem Town Vertical milling machines are characterized by the ability to move the entire spindle head along the column guides. This machine is ideal for machining tools, fixtures, and engine components. Equipment - Vibration-dampening cast iron construction to reduce vibrations - Protective covers in accordance with current safety standards - Automatic feed on all three axes - Rapid traverse on all three axes - Digital readout (DRO) - Infinitely variable feed adjustment - Servo drives for precise and safe operation - Large worktable with high load capacity - Hardened and ground gears for significant noise reduction - Centralized lubrication system - Functional control panel for intuitive operation - Possibility to set any inclination angle - Table guard available as optional accessory Technical Data | Parameter | Specification | |-----|----- | | Worktable dimensions | 1600 × 360 mm | | Maximum table load | 500 kg | | Worktable swivel angle | -45° / +45° | | Travel X/Y/Z | 1300 / 320 / 450 mm | | Feed rate X axis | 30–750 mm/min | | Feed rate Y axis | 20–500 mm/min | | Feed rate Z axis | 15–375 mm/min | | Rapid traverse X/Y/Z | 1200 / 800 / 600 mm/min | | T-slots | 3 / 18 / 80 mm | | Spindle taper | Horizontal ISO50 / Vertical ISO50 | | Arm travel | 550 mm | | Distance, vertical spindle to table | 196–646 mm | | Distance, horizontal spindle to table | 20–470 mm | | Vertical spindle speed | (12) 60–1750 rpm | | Horizontal spindle speed | (12) 60–1800 rpm | | Vertical spindle motor | 4.0 kW | | Horizontal spindle motor | 5.5 kW | | Feed motor output X/Y/Z | 1.5 / 1.5 / 1.5 kW | | Servo drive | 10 Nm | | Dimensions (L × W × H) | 2520 × 2100 × 2000 mm | | Weight | 2800 kg | Delivery Delivery to the customer is available. Transport costs are calculated individually by the carrier. If you are interested in additional machines, please visit our website.