Beli Cronosstech Hgm B20-3100 bekas (1.489)

Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), gaya penekanan: 100 t, lebar meja: 670 mm, panjang meja: 950 mm, gaya punching: 100 t, lubang tembus di meja: 180 mm, diameter silinder: 45 mm, penyesuaian langkah: 120 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric presses are types of mechanical presses powered by force generated through an eccentric mechanism, used for cold forming operations such as punching, cutting, and stamping. Thanks to their high production speed and repeatability, they offer efficient and reliable solutions for mass production lines. The CRONOSSTECH C-Type Excentric Press 100 Ton is designed for stable performance in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suited for serial production. Key Advantages • Stable stroke performance and high repeatability in mass production • Operator safety-focused design (light curtain + safety systems) • Low maintenance requirement thanks to centralized automatic lubrication • Production-ready use with PLC control + two-hand/foot pedal operation Application Areas • Cold cutting and punching operations • Cold shearing applications • Metal die forming • High-volume production lines ✅ STANDARD FEATURES • Steel construction body Fodpjvtx Insfx Anlegg • Slides supported on 4 surfaces • Spheroidal graphite cast iron connecting rod and gear bearings • Crankshaft and transmission shafts made of 4140 tempered steel • Central fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety compliance • Dual-coil safety valve • Manually adjustable stroke • Light curtain hand–finger safety protection system • PLC control system • Two-hand/foot pedal control system • Mechanical safety system • Emergency reverse motor function • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch-screen LCD display (standard on 150–300 ton models) • Hydraulic safety system (standard on 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One tooling set upon request • 8-point slide guide ✅ TECHNICAL SPECIFICATIONS (100 TON) Capacity: 100 Ton Throat depth: 300 mm Table–ram distance: 400 mm Ram–table distance: 465 mm Distance between side frames: 420 mm Ram adjustment (stroke adjustment): 85 mm Approx. press width: 1400 mm Approx. press depth: 1900 mm Approx. press height: 2450 mm Front anchorage dimension: 710 mm Side anchorage dimension: 1135 mm Bolster hole diameter: Ø200 mm Bolster size: 600×780 mm Die clamping slot diameter: Ø50 mm Ram size: 405×240 mm Table height from floor: 775 mm Stroke adjustment: 10–110 mm Strokes per minute: 50 spm Motor power: 11 kW Motor speed: 1450 rpm Approximate weight: 4650 kg Note: If you require any changes in the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 130 t, lebar meja: 750 mm, panjang meja: 1.000 mm, gaya punching: 130 t, lubang tembus di meja: 220 mm, diameter silinder: 55 mm, penyesuaian langkah: 140 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, powered by force generated via an eccentric mechanism. Thanks to its high production speed and repeatability, it is an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 125 Ton is designed for stable operation in cold forming applications. Its rigid steel construction body, pneumatic clutch–brake system, and CE-compliant safety infrastructure provide reliable performance suitable for mass production. Key Advantages Stable stroke performance and high repeatability in mass production Operator safety-oriented design (light curtain + safety systems) Low maintenance requirements with centralized automatic lubrication Production-ready operation with PLC control + dual hand/foot control Fields of Application Cold cutting and punching operations Cold breaking applications Metal die forming High-volume production lines ✅ STANDARD FEATURES • Steel construction body • 4-sided guided ram • Spheroidal graphite cast iron connecting rod and gearboxes • Crankshaft and transmission shafts made from 4140 quenched and tempered steel • Centralized fully automatic grease lubrication system • Pneumatic clutch and brake combination • Complies with CE safety directives • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety system • Emergency reverse motor operation • Complies with occupational safety regulations • Conforms to CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touch LCD screen (standard for 150–300 tons) • Hydraulic safety system (standard for 200–300 tons) • Spare table • Decoiler, feeder, and straightener • One set of die set as per request • 8-guideway slide system ✅ TECHNICAL SPECIFICATIONS (125 TON) Capacity: 125 Ton Throat depth: 310 mm Table–ram distance: 500 mm Slide–table distance: 510 mm Fgjdpfxjvtyvgs Anlog Distance between side frames: 450 mm Ram adjustment (stroke setting): 100 mm Press width: 1500 mm Press depth: 2200 mm Press height: 2700 mm Front anchoring length: 790 mm Side anchoring length: 1250 mm Table hole diameter: Ø210 mm Table size: 630×820 mm Die clamping hole diameter: Ø55 mm Ram size: 500×250 mm Table height from floor: 785 mm Stroke adjustment: 10–125 mm Strokes per minute: 50 SPM Motor power: 11 kW Motor speed: 1450 rpm Weight: 6000 kg Note: If you require changes in technical specifications, please let us know. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, panjang langkah: 350 mm, lebar kerja: 3.100 mm, jangkauan kerja: 3.100 mm, de-de Fodpfjv Hru Ujx Anlsgg

Tahun pembuatan: 1969, Kondisi: siap digunakan (bekas), Tersedia satu set lengkap mesin transfer press 8 tahap dengan mesin press dua tiang Weingarten. 1) Mesin transfer press dua tiang mekanis Weingarten S.3100.08.70.1, tahun pembuatan: 1969, jumlah stasiun perkakas: 9, jumlah tahap kerja: 8, total kekuatan press: 3100 ton, kekuatan press untuk plunger pemotong/plunger penarik: 300 ton/2800 ton, jumlah langkah: 28/menit, langkah plunger pemotong: 200 mm, langkah plunger penarik: 500 mm, kedalaman penarikan maks.: 120 mm, langkah ejektor plunger penarik: 100 mm, langkah penahan: 50 mm, kekuatan bantal penarik: 25 ton, jarak transfer: 700 mm, dimensi plat maks. X/Y: 450 mm/450 mm, diameter bulat maks.: 540 mm, dimensi meja X/Y: 1200 mm/5600 mm, daya motor utama: 300 kW, dimensi mesin X/Y/Z: kira-kira 10500 mm/7500 mm/9700 mm, berat (sesuai dokumentasi): kira-kira 524 ton, jumlah langkah (September 2024): kira-kira 25 juta. 2) Mesin penekuk dan pemotong bundar Georg Maschinentechnik PKD 630, tahun pembuatan: 2004, kekuatan press maks.: 6300 kN, langkah plunger: 240 mm, jumlah langkah: 40/menit, pengaturan plunger maks.: 100 mm, tinggi pemasangan maks.: 525 mm, dimensi meja X/Y: 1200 mm/1500 mm, dimensi plunger X/Y: 1050 mm/1100 mm, daya motor utama: 110 kW, berat: kira-kira 110 ton. 3) Gulungan unwinding Roland Dreher 2398 G-SP, tahun pembuatan: 2004, kapasitas beban maks.: 25500 kg, lebar pita maks.: 1050 mm, rentang diameter dalam gulungan: 475 mm-615 mm, diameter luar gulungan maks.: 2000 mm. 4) Mesin pelurus dan pengumpan Roland Dreher 1689 G-SP, tahun pembuatan: 2004, rentang lebar pita: 100 mm-1050 mm, ketebalan pita maks.: 12,4 mm, luas penampang pita maks.: 6000 mm², rol pelurus: 6, diameter rol pelurus: 100 mm, rol masuk dan keluar: 4, diameter: 140 mm, kecepatan pengumpanan maks.: 50 m/menit, akurasi pengumpanan: 0,1 mm, jarak perjalanan melintang: +/-400 mm. 5) Pengumpan bertahap Roland Dreher 700/160/50, tahun pembuatan: 1994, panjang pengumpanan: 700 mm, jarak penutupan: 160 mm, rentang langkah pengangkatan: 0 mm-50 mm, jarak rel maks.: 1190 mm, jumlah langkah: 24/menit. 6) Sistem pelumasan dan pemrosesan komponen terpusat Leblein, kontrol: Siemens S7-300. 7) Kontrol sistem dan panel kontrol Siemens S7-317 dengan dua unit Siemens ET200M terdesentralisasi, tahun modernisasi: 2011. Termasuk periferal tambahan seperti pengumpan, penanda, sistem hidraulik, konveyor, dll. Dokumentasi tersedia. Pemeriksaan di lokasi dapat dilakukan. Fgedpozl U H Tjfx Anlog

Kondisi: baru, Tahun pembuatan: 2025, daya: 18,5 kW (25,15 hp), panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 140 mm/dtk, tinggi meja: 965 mm, kedalaman tenggorokan: 410 mm, lebar kerja: 4.100 mm, gaya tekuk (maks.): 220 t, jarak antara penyangga: 3.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, STANDARD FEATURES CNC-controlled hydraulic press brake. CNC-controlled Y1 – Y2 – X – R axes (4 axes). CNC control unit (ESA S640 – 15” touchscreen, 2D graphic display). Offline PC programming capability. Stress-relieved, heavy-duty steel frame. CNC-controlled synchronized cylinder system. 310 mm stroke. Fsdox Nqqrepfx Anljgg 410 mm throat depth. ±0.03 mm precision, servo-motor rear gauge. Rear gauge travel distances: X axis: 750 mm R axis: 250 mm Ball screw and linear guide rear gauge system. Sliding-type front support arms. Manual crowning system (wedge type). European style narrow lower table. European style quick-release upper tool clamping system (Promecam type). High-precision linear scales. Standard upper punch (H: 67 mm – 85° – R: 0.8). Standard lower die (60×60 mm – 4 V-channels: 16 / 22 / 35 / 50 mm). Front laser safety system. LED lighting. Foot pedal. Emergency stop buttons. CE-compliant safety equipment. OPTIONAL FEATURES 4 / 6 / 8-axis rear gauge systems starting from X + R. Extension of rear gauge X-axis stroke up to 1000 mm. Additional rear gauge fingers. Hydraulic upper and lower tool clamping systems. Motorized crowning system. Wider lower table for multi-channel dies. Front safety laser system (AKAS or DSP). Rear safety light barrier. CNC-controlled sheet front support systems. Automatic angle measuring system. Oil cooler or heater. Air-conditioned cooling system for electrical cabinet. Deep throat option. TECHNICAL SPECIFICATIONS (C 220 / 4100 MODEL) Bending force: 220 tons. Bending length: 4100 mm. Distance between side frames: 3600 mm. Stroke: 310 mm. Daylight opening: 515 mm. Throat depth: 410 mm. Table height: 965 mm. Rear gauge axes: X = 750 mm / R = 250 mm. Approach speed: 180 mm/s. Working speed: 140 mm/s. Return speed: 10 mm/s. Main motor power: 18.5 kW. Oil tank capacity: 290 liters. Machine weight: approx. 13,650 kg. Machine dimensions (LxWxH): approx. 6180 x 2650 x 3040 mm.

Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), panjang langkah: 310 mm, kecepatan operasi: 8 mm/dtk, kecepatan mundur: 80 mm/dtk, tinggi meja: 1.055 mm, kedalaman tenggorokan: 510 mm, lebar kerja: 6.100 mm, gaya tekuk (maks.): 400 t, jarak antara penyangga: 5.100 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam system) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping Fgsdpfx Asx Nn Syonlsg • WILA hydraulic upper and lower die clamping • Wide lower table for multi-V dies • Backgauge X distance: 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge stops TECHNICAL SPECIFICATIONS VALUE Bending Force (Tons) 400 Bending Length (mm) 6100 Distance Between Side Frames (mm) 5100 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 1055 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank (L) 400 Machine Weight (kg) 33000 Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam system) Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, daya: 30 kW (40,79 hp), panjang langkah: 310 mm, kecepatan operasi: 8 mm/dtk, kecepatan mundur: 80 mm/dtk, tinggi meja: 985 mm, kedalaman tenggorokan: 510 mm, lebar kerja: 4.100 mm, gaya tekuk (maks.): 400 t, jarak antara penyangga: 3.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features • 4-axis CNC (Y1, Y2, X, R) (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit Fgedpex Npalofx Anlog • Servo motorized backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European-type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge system) • Narrow lower table (European type) • GIVI brand linear encoders • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-groove V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove dies • Backgauge X-axis distance 1000 mm • AKAS or DSP laser light front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Approach Speed (mm/sec) 100 Return Speed (mm/sec) 80 Press Speed (mm/sec) 8 Oil Tank (L) 400 Machine Weight (kg) 22500 Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge) Safety System Laser front safety Origin Turkey

Kondisi: baru, Tahun pembuatan: 2025, daya: 22 kW (29,91 hp), panjang langkah: 310 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 110 mm/dtk, tinggi meja: 955 mm, kedalaman tenggorokan: 410 mm, lebar kerja: 4.100 mm, gaya tekuk (maks.): 320 t, jarak antara penyangga: 3.600 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 4, jenis mahkota: digerakkan oleh motor, jenis aktuasi: hidrolik, Standard Features Fgsdjx Nn I Uspfx Anleg • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven back gauge (X=750 mm, R=250 mm) with ±0.03 mm precision • European type Promekam quick tool clamping system • Sliding front support system • Manual crowning system (Original WILA cam) • Narrow lower table (European type) • GIVI linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-groove, V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis back gauge options starting from X+R axes • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-groove dies • Back gauge X travel up to 1000 mm • AKAS or DSP laser front safety system • Additional back gauge fingers • Additional back gauge tongue TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 320 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Open Height (Daylight) (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/s) 150 Return Speed (mm/s) 110 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 16800 Main Motor Power (kW) 22 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA cam) Safety System Laser front safety Origin Turkey

Kondisi: bekas, Tahun pembuatan: 2008, Sheet width 3100 mm Sheet thickness 13.0 mm Sheet thickness for stainless steel 8.0 mm Hold-downs 14 units Strokes 11 - 20 strokes/min Oil capacity 310 ltr. Cutting angle 0.05 - 2.0 ° Throat depth 350 mm Table height 900 mm Total power requirement 22.0 kW Machine weight approx. 13,400 kg Dimensions (L-W-H) 5,110 x 2,570 x 2,400 mm Current new price approx. 80,000 Euro Special price on request - in inspected condition - machine video - ?v=K4ymYMIJ7_Y ----- Robust electro-hydraulic CNC guillotine shear, "guided in a link-motion mechanism" * Including CYBELEC "DNC 60 CUT" controller * Including CNC electro-hydraulic blade gap adjustment * Including CNC electro-hydraulic cutting angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear, "link-motion guided" - Including CYBELEC CNC controller, model "DNC 60" - CNC controlled, electrically driven backgauge, travel range = 5.0 - 1,000 mm (X axis) * with ball screw spindles * automatically foldable at the maximum travel distance for longer cuts * includ. retract function selectable ("swing-away function") * positioning accuracy 0.1 mm Fgodoxaadaepfx Anljg * approx. traversing speed 80.0 mm/sec. - Electro-hydraulic cutting angle adjustment - Electro-hydraulic blade gap adjustment - 1x side gauge with T-groove and mm scale - 2x front support arms with T-groove and mm scale - Ball rollers in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic unit - SIEMENS electrical system - Light curtain at the rear of the machine (safety device) - Rear sheet metal chute (for stacking cut sheets) - 1x movable foot switch - CE mark - Operating manual

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, panjang total: 1.250 mm, tinggi total: 1.900 mm, lebar total: 2.000 mm, berat keseluruhan: 1.850 kg, Tidak ada harga minimum – penjualan dijamin dengan penawaran tertinggi! Fgedpfx Aozvb I Eenleg Mesin ini adalah hasil dari pengembalian setelah masa sewa, karena pabrik ditutup. Mesin untuk memisahkan atau memilah papan sirkuit secara otomatis dan presisi dari sisa-sisa papan sirkuit. RINCIAN MESIN Harga baru 2024: 149.000,00 € (belum termasuk pajak) Jumlah papan sirkuit yang diproses: 42.680 unit Dimensi palet (P x L x T): 1.250 x 2.000 x 1.900 mm Berat mesin: sekitar 1.850 kg PERALATAN Kontrol diameter pahat Paket suku cadang DIVISIO Penyesuaian lebar transportasi otomatis Tinggi transportasi SMEMA Modul pemisahan, pahat poros 500 W Modul perangkat keras, kamera Modul perangkat lunak, fungsi pengajaran untuk kamera Modul perangkat lunak, pengenalan tanda fidusial Ekstensi, pengganti alat 8 arah Selang penyedot, manual Pemantauan daya penyedotan Konversi data CAD ASYCAM A Adrep Sakelar utama yang diposisikan ulang Rantai E dan selang P ESD, standar Ukuran kemasan, grup 3 palet • Tinggi dan berat aset harus dipertimbangkan saat memilih kendaraan pengangkut. • Sebuah forklift tersedia untuk pemuatan. • Jika pengambilan tidak dilakukan tepat waktu, biaya penyimpanan sebesar 20,00 € per lot dan per hari akan dikenakan. Biaya ini harus dibayar sebelum pengambilan. • Penjualan dilakukan tanpa jaminan atau garansi apa pun. • Tidak ada jaminan untuk kesalahan pengetikan dan pengukuran. Jika ragu, silakan bandingkan spesifikasi dengan foto yang disediakan atau periksa barang secara langsung sebelum lelang berakhir.

Kondisi: baru, Tahun pembuatan: 2025, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 380 mm, diameter rol atas: 380 mm, diameter roll samping: 300 mm, lebar kerja: 3.100 mm, ketebalan lembaran (maks.): 25 mm, Perlengkapan: dokumentasi / manual, henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, STANDARD EQUIPMENT * The lower and side rolls move up and down linearly via pistons hydraulically connected to the frame * Protected against overload * The upper and side rolls are driven by hydromotor and planetary gearbox (all 3 rolls are motor driven) * The positions of the rolls can be easily read via three digital displays * Easy part removal with a hydraulically opening head and automatically rising shaft * Very easy operation with movable control panel * Welded steel construction body * Forged or rolled SAE 1050 (CK 50) steel shafts, induction-hardened * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Fjdpfx Ansxw Ecvolegg Bending Length : 3100 mm Pre-bending : 16/20 mm Bending : 20/25 mm Upper & Lower Roll : 380 mm Side Roll : 300 mm Motor Power : 31.5 kW Rolling Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 19,200 kg

Kondisi: bekas, Tahun pembuatan: 2021, Tekanan tekan maksimal 100 ton Panjang tekukan maksimal 3060 mm Jarak antara kolom 3384 mm Fodpfxoxr U Nho Anlogg Pergerakan sumbu X 600 mm Panjang langkah (diperbesar) 350 mm Tinggi pemasangan (diperbesar) 580 mm Pembombing bawah otomatis Sumbu yang dikendalikan: Y1, Y2, X1, X2, Z1, Z2, R1 & R2 Kontrol: Trumpf T3500T (visualisasi warna/grafik 3D) Dilengkapi dengan: Paket perkakas senilai 100.000 ekskl. PPN. 2 unit lengan penyangga manual - dapat digeser secara lateral Penguncian cepat manual Trumpf untuk pemasangan perkakas atas dengan panjang penuh - merek Wila Mesin tampak seperti baru dari pabrik Harga pengadaan tahun 2021: DKK 850.000 ekskl. PPN.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Pr4 100/3100 Merek: Edwards Pearson Model: PR4 100/3100 MULTI-AXIS Tahun / baru: 1996 Jumlah sumbu: 6 – Sumbu gerak belakang 4-sumbu X R Z1 Z2 Kapasitas / ukuran meja / tonase: 3 meter x 3100 mm x 100 ton Kontrol CNC: Cybelec DNC 80 CNC control Fgedpfjw Aw Svex Anljg Kecepatan penutupan maksimum 200 mm Dapat dilihat dalam keadaan terhubung listrik

Kondisi: baru, Tahun pembuatan: 2025, jenis kontrol: Kontrol NC, jenis aktuasi: hidrolik, jumlah rol: 4, diameter roller (bawah): 550 mm, diameter rol atas: 550 mm, diameter roll samping: 450 mm, panjang rol: 3.100 mm, ketebalan lembaran (maks.): 50 mm, ketebalan pelat baja (maks.): 50 mm, daya: 70 kW (95,17 hp), masa garansi: 12 bulan, Perlengkapan: henti darurat, kendali jauh kaki, rol atas yang dapat berputar, rol yang dikeraskan, en_STANDART EQUIPMENT * The lower, upper, and side rolls perform linear up-and-down movement by pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydromotors and planetary reducers (all three rolls are motor-driven) * Roll positions are easily readable via three digital displays * The hydraulically opening head and the automatically upward-moving shaft enable easy removal of the bent workpiece * Very easy operation with a mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (elevator) for large-diameter bending support * Hydraulic side supports for large-diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special operations * Stepless speed adjustment system * Electronic balancing system for parallel movement of the shafts (Ø280-320-350-380-400-460) Fgjdjxbzptopfx Anlsg TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 50/40 mm Bending : 40/35 mm Top & Bottom Roll : 550 mm Side Roll : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, daya: 18,5 kW (25,15 hp), tegangan masuk: 400 V, panjang langkah: 250 mm, kecepatan operasi: 100 mm/dtk, kecepatan mundur: 90 mm/dtk, tinggi meja: 900 mm, kedalaman tenggorokan: 400 mm, panjang total: 4.550 mm, lebar total: 2.350 mm, tinggi total: 2.950 mm, berat keseluruhan: 15.000 kg, produsen pengendali: CYBELEC, model controller: MODEVA 10S, lebar kerja: 3.100 mm, gaya tekuk (maks.): 250 t, jarak antara penyangga: 2.550 mm, tinggi pemasangan: 517 mm, jenis kontrol: Kontrol CNC, penyesuaian pengukur belakang: dikendalikan CNC, jumlah sumbu: 6, jenis mahkota: dikendalikan CNC, Spesifikasi teknis INTERMEDIAT/BANTALAN/MATRIKS BARU. Laser perlindungan Meja penekuk CNC CNC CYBELEC MODEVA 10S Sumbu CNC: Y1/Y2/X/R Z1/Z2 manual Tahun: 2009 MESIN BEBAS DARI TANAH (tidak tertanam) Fgsdpfxsymyffs Anlsg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar kerja: 3.100 mm, panjang kerja: 3.100 mm, Hochwertige, sehr saubere gebrauchte Bystronic 8-Achsen CNC-Abkantpresse mit Bördel-Tisch zu verkaufen BYSTRONIC XPERT 100x3100, 100 Tonnen x 3100 mm, 8-Achsen CNC-hydraulische Gesenkbiegemaschine Baujahr 2009 – komplett gewartet und sehr gepflegt Ausstattung (Highlights): Fodotv Ixtepfx Anlsgg Baujahr: 2009 Modell: Xpert 100x3100 Hydraulische Werkzeugklemmung Programmierbarer Hinteranschlag Schutzeinrichtungen Biegekraft: 100 Tonnen Maximale Biegelänge: 3100 mm / 3 Meter Max. Hub: 215 mm Eilgang: 180 mm/s Werkzeuge oben und unten Fußschalter mit Wanderfunktion Insgesamt 8 Achsen: Y1, Y2, X1, X2, R1, R2, Z1, Z2 – 6-Achsen Hinteranschlag Inklusive Bördel-Tisch für Niederlande-Bördelfalz / Sicherheitskanten und Abkantungen Bombierung

Kondisi: baru, Tahun pembuatan: 2025, panjang langkah: 300 mm, kecepatan operasi: 10 mm/dtk, kecepatan mundur: 95 mm/dtk, produsen pengendali: ESA - DELEM - Cybelec, lebar kerja: 3.100 mm, gaya tekuk (maks.): 100 t, jarak antara penyangga: 3.345 mm, jenis kontrol: Kontrol CNC, jumlah sumbu: 4, jenis aktuasi: listrik, BELT-DRIVEN SERVO CNC PRESS BRAKE Bending Capacity: 3100 mm / 100 Tons (E100 Model) STANDARD FEATURES - CNC controlled belt-driven servo press brake - Y1 – Y2 – X – R axes CNC controlled (4 axes) - CNC control unit (ESA S830 – 10” color touchscreen, 2D graphic display) - Automatic bending calculation and collision prevention functions - High-precision synchronized servo drive system - Belt-driven upper beam movement system, oil-free and low maintenance - Spring-supported upper beam design supporting energy recovery - O-frame construction for minimum deformation - 300 mm stroke - 410 mm throat depth - Servo motorized backgauge system (X + R axes) - Backgauge accuracy: ±0.03 mm - Backgauge travel distances: - X axis: 750 mm - R axis: 250 mm - Hardened ball screws and linear guides - 2 three-position backgauge fingers - European style upper die holder – quick-release (Promecam type) - European style narrow lower table - Standard upper die (H: 67 mm – 85° – R: 0.8 mm) - Standard lower die (60×60 mm – 4 V: 16 / 22 / 35 / 50 mm – 85° – H: 60 mm) - High-precision optical linear scales - LED work area lighting - Sliding front support arms - Dual foot pedals - Emergency stop buttons - Safety equipment in accordance with CE standards OPTIONAL FEATURES - Additional backgauge axes (Z1 – Z2 – X5) - Backgauge travel increased to 1000 mm - Motorized crowning system - Hydraulic upper and lower die clamping systems - Front safety laser system (AKAS or DSP type) - Rear safety light barrier - CNC controlled sheet support arms - Laser bending line - Laser angle measurement system - Automatic angle measuring systems - Air-conditioned cooling system for electrical cabinet - Additional backgauge fingers - Custom die and table solutions TECHNICAL SPECIFICATIONS (E100 / 3100 MODEL) - Bending force: 100 tons - Bending length: 3100 mm - Distance between side frames: 3345 mm - Stroke: 300 mm - Throat depth: O-frame construction - Open height (between upper/lower jaws): 515 mm - Table height: 900 mm Speeds - Down speed: 95 mm/s - Bending speed: 10 mm/s (in compliance with CE) - Return speed: 95 mm/s Backgauge - X axis travel: 750 mm - R axis travel: 250 mm - X axis speed: 400 mm/s - R axis speed: 100 mm/s - Z axis speed: 600 mm/s Fgjdpsx Nqukjfx Anlog General - Main motor power: 2 × 5.5 kW - Machine weight: approx. 7,500 kg - Machine dimensions (LxWxH): approx. 4600 × 2000 × 2650 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, Data Umum Berat mesin: 9000 kg Tinggi mesin: 2300 mm Kedalaman mesin: 4300 mm Fjdpfjx D It Rsx Anljgg Pergerakan Gerak Sumbu X: 3000 mm Gerak Sumbu Y: 1200 mm Penggerak Utama Jumlah sumbu: 3 Dimensi Panjang mesin: 15000 mm Mesin Hypertherm PL-YPE 3100 dengan 3 sumbu ini diproduksi pada tahun 2017 dan dilengkapi dengan sumber plasma gas Hypertherm® HyPerformance HPR 400XD. Mesin ini menawarkan pemotongan presisi dengan kapasitas maksimum 50 mm pada baja lunak, 75 mm pada baja tahan karat, dan 45 mm pada aluminium. Area efektif pemotongan adalah 3000 mm x 1200 mm. Jika Anda membutuhkan kemampuan pemotongan berkualitas tinggi, pertimbangkan mesin Hypertherm PL-YPE 3100 yang kami tawarkan. Hubungi kami untuk informasi lebih lanjut. Tipe Aplikasi Pemotongan

Kondisi: baru, Tahun pembuatan: 2025, daya: 7,5 kW (10,20 hp), ketinggian potong (maks.): 1.100 mm, lebar pemotongan (maks.): 1.600 mm, masa garansi: 12 bulan, STANDARD FEATURES - Independently operated dual hydraulic vises - Linear rapid descent system - Variable blade speed control - Variable head descent speed control - Hydraulic blade tensioning system - Table traverse system - Safety switches - Chip conveyor - Motorized chip brush - 1 piece band saw blade - 24 months mechanical, 12 months electrical warranty - Country of origin: Turkey TECHNICAL SPECIFICATIONS CUTTING CAPACITY ROUND (MM): 1100 CUTTING CAPACITY SQUARE (MM): 1100X1100 CUTTING CAPACITY RECTANGULAR (MM): 1100X1600 BLADE SIZE (MM): 67X1.6X11630 Fsdpfx Asvvcp Usnlegg BLADE SPEED (M/MIN): 20 – 80 MAIN MOTOR (KW): 7.5 HYDRAULIC MOTOR (KW): 1.5 COOLANT PUMP (KW): 0.09 VOLTAGE (V): 380 FREQUENCY (HZ): 50 WORKING HEIGHT (MM): 535 MACHINE DIMENSIONS (MM): 5390X1760X2875 WEIGHT (KG): 8000 WE MANUFACTURE STRAIGHT AND MITRE CUTTING MODELS FROM 220MM UP TO 3000MM. FOR FURTHER INFORMATION, PLEASE CONTACT US.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 150 t, lebar meja: 720 mm, panjang meja: 1.000 mm, lubang tembus di meja: 220 mm, penyesuaian silinder hidrolik: 120 mm, penyesuaian langkah: 125 mm, Perlengkapan: penghadang cahaya keselamatan, MANUFACTURING LOCATION: TURKEY WARRANTY PERIOD: 24 MONTHS DELIVERY TIME: IMMEDIATE FROM STOCK GENERAL FEATURES OF D-TYPE ECCENTRIC PRESSES - Steel construction frame - Stress relief of the frame and welded components by vibration - Table parallelism and perpendicularity tolerance in accordance with ISO and DIN standards Fgjdpfxevyrywo Anlog - Pneumatic clutch and brake combination – OMPI-Italy - Ram with 8 slide guides - Ram cushioning cylinder - Ram, connecting rod, and clutch parts made of GS52 steel casting - High strength single piece crankshaft – 4140 - Bronze insert in connecting rod (Zr14) - Rear-mounted flywheel - Spare bolster table - Hydraulic overload protection - Motorized table-to-ram adjustment - Automatic central lubrication system - Pneumatic pedal with catch and dual hand control with time delay - Electrically controlled counter - PLC control with touch screen – DELTA - Electrical switchgear components: SIEMENS-SCHNEIDER - CE conformity (optional) - Finger protection light curtains – SICK, LEUZE - Safety PLC (controls all electrical system, valve, hand and foot controls) – PILZ - Dual coil safety valve – GPA, TOPAIR - Lockable position switch and panel - Safety block - Protective guards as per CE regulations TYPE: D-TYPE MONOBLOC BODY Capacity: 150 Tons Distance Table-to-Ram: 500 mm Distance Between Side Walls: 1080 mm Ram Adjustment: 120 mm Approx. Press Width: 1400 mm Approx. Press Depth: 1900 mm Approx. Press Height: 3000 mm Table Bore Diameter: 220 mm Table Size: 720 / 1000 mm Die Mounting Slot Diameter: 55 mm Ram Size: 450 / 800 mm Height Table-to-Floor: 900 mm Stroke Adjustment: 10 / 125 mm Strokes per Minute: 50 spm Motor Power: 15 + 0.75 kW Motor Speed: 1450 RPM Approximate Weight: 12,000 kg

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, SCHEER FM 16 Panel Saw System – DNC 3100 x 3100 As-new condition – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel saw featuring state-of-the-art drive technology and an intuitive control system. The machine has been completely overhauled and newly painted – its condition is virtually as-new. Ideally suited for precise, automated cutting of wood-based panels in continuous industrial operation. Key technical data: Cutting length: 3,100 mm Saw depth / blade projection: 80 mm Main saw motor: 7.0 kW Scoring saw motor: 1.1 kW (can be switched on/off) Feed speed: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering Fgjdpfx Asunwk Tsnljg Operator interface: SCHEERWIN, graphical, document-oriented (64-bit), running on Windows 10 Drive system: Küenle inverter with Stöber synchronous servo drives incl. absolute encoders – for highest positioning accuracy and dynamic control Features & equipment: Longitudinal panel saw FM 16-3100 with hardened guides and automatic forward/reverse Material feed table HP 5021 with 6 clamp grippers, servo drive & measuring accuracy of 0.05 mm Automatic angle pressure device WP, adjustment range 2,400 mm Off-cut device SP 5000 for minimum off-cuts as small as 5 mm Angle stop table HP 5024 (1,800 x 800 mm), steel angle with Pertinax surface Workpiece support table HP 5025 (1,800 x 800 mm), also with Pertinax surface Air cushion system in the front tables incl. radial fan Saw blades included: KSB 4005 for main saw (305 mm dia., Z = 60) KSB 4006 for scoring saw (200 mm dia.) Condition & Service: Condition: Factory reconditioned & as-new Functionality: Fully operational Warranty: 12 months Reliability in intensive use: This machine operates reliably worldwide—even under extreme conditions. Whether in Africa’s dry climate or in high humidity environments in Southeast Asia (e.g., Thailand), the SCHEER FM 16 runs flawlessly in 3-shift systems—365 days a year—and impresses with its exceptional precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excluding electrical supplied parts and consumables.) Flexibility & customization: We offer various models and configurations for every budget. Custom solutions tailored to your individual requirements are also available. 📞 Contact us for a personalized offer or to schedule a viewing. Machine available ex stock. Delivery, commissioning, and training available as options.

Kondisi: baru, Tahun pembuatan: 2026, daya: 55 kW (74,78 hp), gaya penekanan: 1.250 t, panjang langkah: 510 mm, kecepatan operasi: 6 mm/dtk, kecepatan mundur: 55 mm/dtk, kedalaman tenggorokan: 810 mm, jarak antara tiang: 7.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 1250 Ton 8.1 Metre CNC Press Brake – New / 12-Month Warranty Press brakes are heavy-duty industrial production machines designed for the precise, repeatable, and controlled bending of large-format sheet metal. The CRONOSSTECH 1250 Ton CNC Press Brake, featuring an 8,100 mm bending length and high tonnage capacity, is specifically engineered for heavy steel construction, energy sector, and large-scale industrial projects. Fgodpfoyzb Hnjx Anlsg Key Advantages - High-precision bending over 8.1 meters - 1250-ton maximum bending capacity - Advanced automation with ESA S840W CNC control unit - Servo-motorized X+R axis precision backgauge - WILA motorized crowning system for uniform bending - Heavy-duty, high-strength machine frame Applications - Heavy steel construction - Energy sector and infrastructure projects - Shipbuilding and shipyard industries - Defense and heavy machinery manufacturing - Large-format sheet metal bending applications Standard Features - ESA S840W CNC control unit (3–8 axes) - 15.6” touchscreen, 2D graphics & offline programming - Automatic bending sequence and collision control - Angle measurement and automatic crowning correction - Servo-driven X + R axis backgauge system - High-precision linear guideways and ballscrew system - 2 backgauge fingers (3-position adjustable) - Promecam quick tool clamping system (E20) - Eurostamp standard punch and die set - D-Series full cabin safety enclosure - Dual foot pedal (up/down) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic system, Parker pump - LED lighting and energy-saving mode - Heavy-duty front support arms - WILA motorized crowning system Technical Specifications - Bending Capacity: 1250 Tons - Bending Length: 8,100 mm - Distance Between Columns: 7,100 mm - Stroke: 510 mm - Open Height (Daylight): 775 mm - Throat Depth: 810 mm - Table Height: 750 mm - Pit Depth: 2,375 mm - Machine Dimensions (LxWxH): 10,600 x 3,650 x 4,500 mm - Approach Speed: 70 mm/s - Bending Speed: 6 mm/s - Return Speed: 55 mm/s - Oil Tank: 1,000 L - Motor Power: 55 kW - Weight: 136,000 kg Optional Features - Advanced multi-axis backgauge systems (4–6–8 axes) - WILA hydraulic tool clamping systems - Hydraulic punch clamping rolls - Widened table (for Multi-Vee dies) - 1,000 mm X-axis stroke - AKAS / DSP laser safety systems - Additional backgauge fingers General Information - Country of Manufacture: Turkey - Warranty: 12 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2026, daya: 22 kW (29,91 hp), gaya penekanan: 320 t, panjang langkah: 310 mm, kecepatan operasi: 9 mm/dtk, kecepatan mundur: 110 mm/dtk, kedalaman tenggorokan: 410 mm, jarak antara tiang: 5.100 mm, Perlengkapan: Penandaan CE, dokumentasi / manual, penghadang cahaya keselamatan, 320 Ton 6 Meter CNC Press Brake – HPB C320-6100 – New / 12-Month Warranty Press brake machines are essential equipment in sheet metal bending operations, providing high precision, repeatability, and production efficiency. Manufactured by CRONOSSTECH, the HPB C320-6100 CNC Press Brake is engineered for precise and stable processing of large-format sheets with a bending capacity of 320 tons and a bending length of 6100 mm. Key Advantages - High-precision bending over 6 meters - Advanced programming via ESA S840 CNC control unit - High-precision servo motorized backgauge system - Homogeneous bending with WILA crowning system - Heavy-duty frame with high stability - European origin hydraulic and electrical components Applications - Large-scale sheet metal bending - Steel construction manufacturing - Energy and infrastructure projects - Machinery and equipment production - Industrial production lines Standard Features - ESA S840 (3-6 axis) CNC control unit - 15.6” touchscreen, 2D graphics, and offline software - Automatic bending sequence and collision control - Angle measurement and automatic angle correction (crowning) - CRONOSS X+R axis servo motorized backgauge (±0.03 mm accuracy) - Hardened linear guide and ball screw system Fodpfx Ajyzb Ewenlsgg - Two adjustable backgauge fingers - Promecam quick clamping system - Eurostamp standard punch & die set - Full cover safety system - Dual foot pedal (up/down control) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic block, Eckerle pump - LED lighting, energy-saving mode - Front support arms (high-strength, adjustable) - Manual WILA crowning system Technical Specifications – HPB C320-6100 - Bending Capacity: 320 tons - Bending Length: 6100 mm - Distance Between Columns: 5100 mm - Stroke: 310 mm - Daylight: 535 mm - Throat Depth: 410 mm - Table Height: 1065 mm - Machine Dimensions (LxWxH): 8150 x 2655 x 3170 mm - Approach Speed: 150 mm/s - Bending Speed: 9 mm/s - Return Speed: 110 mm/s - Oil Tank Capacity: 290 L - Motor Power: 22 kW - Weight: 27,000 kg General Information - Place of Manufacture: Turkey - Warranty: 12 Months - Condition: Brand new and unused This machine is manufactured by CRONOSSTECH in Turkey.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 250 t, panjang langkah: 200 mm, lebar meja: 1.100 mm, panjang meja: 2.000 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, The eccentric press is a type of mechanical press powered by a force generated via an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process safety even with large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 250 – H Type Eccentric Press 250 Ton is engineered for stable operation, die protection, and operator safety in high-volume production. Featuring a monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance for continuous production environments. Key Advantages - Stable operation with large dies due to 2000×1100 mm table size - Die/equipment protection with hydraulic overload safety device - 8-point guided ram + counterbalance piston for precise guidance - Controlled, user-friendly operation with PLC and touchscreen - High operator safety with light curtain protection Application Areas - Punching/cutting/forming operations requiring large table sizes - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel body construction • Pneumatic clutch-brake • Additional T-slotted bolster plate • 8-point guided slide • Adjustable stroke via single connecting rod • Counterbalance piston on slide • Fully automatic lubrication system Fgedpjx N Rwrofx Anleg • PLC control system • Piano-type control panel • Touchscreen LCD • Reverse motion motor • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety system • Enclosed oil sump with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover at table front • Custom dies as requested ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 Ton Table-Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2650 mm Press Height: 4600 mm Table Dimension: 2000×1100 mm Ram Face Size: 2000×1100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales services are managed by CRONOSSTECH.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 500 t, panjang langkah: 200 mm, lebar meja: 1.200 mm, panjang meja: 2.200 mm, masa garansi: 24 bulan, Perlengkapan: penghadang cahaya keselamatan, Excentric press is a type of mechanical press powered by force transmitted through an eccentric mechanism, used in cold forming operations such as punching, cutting, and shaping with dies. H-type (straight-side) eccentric presses provide high stability and process reliability in applications with large tables and heavy dies, owing to their rigid frame construction. The CRONOSSTECH CEHP 500 – H-Type Eccentric Press 500 Ton is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it offers dependable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/equipment protection with hydraulic overload safety - Precise guidance provided by 8-point guided ram + balancer piston - Controlled and user-friendly operation via PLC + touchscreen display - Enhanced operator safety through light curtain protection Applications - Punching/cutting/forming processes requiring large tables - Mass production with automated feeding lines - Heavy die and high tonnage manufacturing processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke with a single connecting rod • Balancer piston on the ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touch LCD screen • Reverse motor function • Hydraulic overload safety device • Motorized ram adjustment • Light curtain protection • Enclosed gear group in oil reservoir • Dual-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety cover at the front of the table • Dies manufactured to requested specifications ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Ton Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Dimension: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg Fgjdpex N R Ahsfx Anleg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.