Beli Jmg Mc 70S bekas (8.879)

Tahun pembuatan: 2019, jam operasional: 3.575 h, Kondisi: sangat baik (bekas), en-001 Bdedpfey Avfzox Alaob

Kondisi: sangat baik (bekas), Weiss Umwelttechnik WT-600/70/5 Temperature Test Chamber -70°C to +180°C Water-cooled For sale is a used temperature test chamber by Weiss Umwelttechnik. The unit is fully functional and has been tested. This is a pure temperature testing device without humidity control. The chamber is suitable for testing components, electronics, and materials under extreme temperature conditions. It is frequently used in industry, R&D, and quality assurance. The temperature range extends from -70°C to +180°C. The unit can heat up and cool down rapidly, and operates with recirculating air for uniform temperature distribution inside the chamber. Cable feedthroughs of 125 mm and 50 mm are available. Technical Data: Model: WT-600/70/5 Cooling / Heating operation: -70°C to 180°C Rate of temperature change: Cooling approx. 6 K/min Heating approx. 6 K/min External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Test chamber volume: approx. 600 liters Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 16 kW Rated current: 19 A Customer fuse requirement: 29 A slow-blow Permissible test load: Maximum load on racks: 80 kg Test chamber floor: 80 kg, Insert rack: 40 kg Refrigerants: R 404A/R23 Weight: 675 kg Important safety information for you as buyer! The following procedures are always carried out on our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. New fill with legally compliant refrigerant 3. After successful inspection, chambers are put through a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) Bdedpoy At Sxofx Alaob (Specifications and data are subject to change and error!) If you have further questions, we are happy to answer them by phone.

Kondisi: bekas, nomor mesin/kendaraan: 12861, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor 2 rows of stator blades Feed opening approx. 400 x 600 mm Drive motor: 22 kW Bjdpfoyr Trcjx Alaedb

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Esta línea está compuesta por: - Unidad de llenado - Tapadora y dispensador de tapas. La producción dependerá del formato y del producto a envasar. Características de la TAPADORA ZALKIN: * Modelo: T6069 * Número de cabezales: 20 * Producción: 25.000 bph (botellas por hora). Las tapadoras Zalkin están diseñadas para el cierre con tapones roscados de aluminio (para bebidas carbonatadas o líquidos no carbonatados). También pueden equiparse para la aplicación de tapones de aluminio o plástico de varios tipos (tapones precintados de aluminio o plástico, tapones de rosca o de clic). El distribuidor orientador de tapas SIDEL combina tres funciones en una sola máquina: elevación, orientación y distribución. El sistema orienta eficazmente las tapas y optimiza la utilización del espacio en planta. Este diseño permite orientar tapas de diámetros de 20 mm a 120 mm, tanto de plástico como metálicas, según su geometría. El sistema puede alcanzar velocidades de hasta 2.000 tapas/minuto para formatos clásicos y 1.000 tapas/minuto para tapas tipo "sport". El alimentador de tapas se conecta fácilmente al transportador aéreo de tapas SIDEL, eliminando así la necesidad de emplazamiento específico para la máquina. Bedpfsx S Eu Dox Alasdb

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, Perangkat Dosing Movacolor MC Balance MC Liquid No. Gudang: 503616 Jenis Mesin/Perangkat: Alat dosing untuk bubuk dan cairan Produsen: Movacolor Tipe: MC Balance & MC Liquid Tahun Pembuatan: 2020 Bodpfx Ajy Ak Rljlasdb Unit dosing bubuk & cairan Movacolor Terdiri dari: - Dua antarmuka kontrol Movacolor MCTC layar sentuh - Unit dosing bubuk Movacolor MC Balance - Doser cairan gravimetrik Movacolor MC Liquid - Movacolor MCBC Blindcontroller - Unit dosing Movacolor A30 HTC - Wadah corong Movacolor 12 L Unit ini hanya digunakan sekali untuk keperluan pengujian dan kondisinya seperti baru!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1997, de-to-hu-it-lt-lv-nb-nl-pl Bsdpfx Ajy E S Ecjlajdb

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.050 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 635 mm, kecepatan pemakanan sumbu X: 48 m/menit, laju pemakanan gandar Y: 48 m/menit, laju pemakanan sumbu Z: 36 m/menit, daya nominal (semu): 40 kVA, kecepatan rotasi (maks.): 15.000 rpm, berat keseluruhan: 7.200 kg, Perlengkapan: dokumentasi / manual, en The SIGMA MISSION SMV 1050 Vertical Machining Center is a brand-new, heavy-duty machine suitable for a variety of industrial applications. Equipped with the Heidenhain TNC 620 CNC, it offers precision and user-friendly control. The table measures 1150 x 560 mm, allowing for a maximum load of up to 800 kg/m². The machine features a wide range of travel, with axes movement of 1050 mm on the X-axis, 560 mm on the Y-axis, and 635 mm on the Z-axis. It requires an air pressure of 6 to 8 bar for proper operation. With a total weight of 7200 kg, its sturdy construction ensures stability during machining processes. The operational power is 40 KVA, indicating considerable energy consumption, but it is proportional to its capacity and size. The SIGMA MISSION SMV 1050 is a reliable choice for those seeking efficiency and precision in their vertical machining operations. - Travels: X 1,050 mm | Y 560 mm | Z 510 mm - Table: 1,250 × 560 mm | Maximum table load 1,000 kg - Spindle: BT-40, power 11 kW (S1) / 15 kW (S6) - Spindle speed: up to 8,000 rpm - Working feeds: 1 – 8,000 mm/min - Rapid traverse: 22 / 22 / 16 m/min - Tool changer (ATC): 24 tools, swing-arm type - Machine weight: approx. 4,800 kg - External dimensions: 2,950 × 2,450 × 2,850 mm (approx.) - CNC control: (standard configuration or per customer specification) Bdodpfoxgqdqjx Alaob ✅ Designed for workshops requiring versatility, precision, and robust performance in a compact footprint. ✅ Fully equipped: cooling systems, chip protection, automatic lubrication, and CE-compliant safety design. de Das vertikale Bearbeitungszentrum SIGMA MISSION SMV 1050 ist eine neue, robuste Maschine, die sich für eine Vielzahl industrieller Anwendungen eignet. Ausgestattet mit der Heidenhain TNC 620 Steuerung bietet sie Präzision und eine einfache Bedienung. Der Tisch misst 1150 x 560 mm und erlaubt eine maximale Belastung von bis zu 800 kg/m². Die Maschine verfügt über große Verfahrwege: 1050 mm auf der X-Achse, 560 mm auf der Y-Achse und 635 mm auf der Z-Achse. Für einen einwandfreien Betrieb ist ein Luftdruck von 6 bis 8 bar erforderlich. Mit einem Gesamtgewicht von 7.200 kg garantiert der massive Aufbau eine hohe Stabilität während der Bearbeitungsprozesse. Die Anschlussleistung beträgt 40 KVA und entspricht damit dem Leistungsbedarf für diese Maschinenklasse. Die SIGMA MISSION SMV 1050 ist eine zuverlässige Wahl für alle, die Effizienz und Präzision beim vertikalen Bearbeiten suchen. - Verfahrwege: X 1.050 mm | Y 560 mm | Z 510 mm - Tisch: 1.250 × 560 mm | maximale Tischbelastung 1.000 kg - Spindel: BT-40, Leistung 11 kW (S1) / 15 kW (S6) - Spindeldrehzahl: bis 8.000 U/min - Arbeitsvorschub: 1 – 8.000 mm/min - Eilgang: 22 / 22 / 16 m/min - Werkzeugwechsler (ATC): 24 Werkzeuge, Schwenkarm - Maschinengewicht: ca. 4.800 kg - Außenmaße: 2.950 × 2.450 × 2.850 mm (ca.) - CNC-Steuerung: (Standardausführung oder nach Kundenwunsch) ✅ Konzipiert für Werkstätten, die Vielseitigkeit, Präzision und Stabilität in kompakten Abmessungen benötigen. ✅ Komplett ausgestattet: Kühlsysteme, Späneschutz, automatische Schmierung und CE-konforme Sicherheit.

Tahun pembuatan: 2022, Kondisi: bekas, Uplifter Mini Crane MC 285-3 CWME, kapasitas angkat 2820 kg pada radius 1400 mm. Ketinggian angkat maksimum: 8700 mm. Jangkauan kerja maksimum: 8200 mm (untuk beban sekitar 150 kg). Dilengkapi dengan ujung pemasangan dan troli transportasi UPT 200. Waktu operasional kurang dari 100 jam. Lokasi penyimpanan: di pelanggan. Bodoytrd Topfx Alasdb

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor GKF 1650-750-550 IR600 70° Right RA1441 The Transnorm belt curve is in good (used) condition and fully functional. It features a SEW brand geared motor. Support legs are not included in the scope of delivery, but are available as an option upon request. Belt curves are frequently used in intralogistics for the in-house transportation of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves impress with their performance and reliability. Thanks to low-tension drive technology across the entire belt width, long operating times are no problem. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. The images shown of the conveyor system were taken while still installed in a logistics center. Technical Data: Model Designation: Belt Curve Conveyor TS 1600-105 Conveying Length, Center Radius (NL): 1650 mm Frame Width (NB): 750 mm Belt Width (GuB): 550 mm Overall Height (BH): 210 mm Inner Radius (IR): 600 mm Conveying Angle: 70° Support Legs: optional Conveying Speed (v m/s): adjustable up and down with frequency inverter Drive: SEW Geared Motor SA37 DT80K4/MM05/BW1 Electrical Data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double ply, green, smooth, KT36 (wear see pictures) Year of Manufacture: 2001 Special Features / Accessories: Side guides included on both sides Bjdpfx Ask Abazelajdb Optionally available: Support legs Net price plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please feel free to contact us. Reach out to us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and point of contact for intralogistics

Kondisi: bekas, Tahun pembuatan: 2001, Transnorm Belt Curve Conveyor 70° Left GKF 70°-770-600 IR600 Bdedpfsk Abf Uex Alaeb RA1415 The Transnorm belt curve is in good condition (used) and fully operational. It is equipped with a SEW brand geared motor. Support stands are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for in-plant transport of unit loads and have become indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Due to a low-tension drive across the entire belt width, extended operation times are no issue. Tapered rollers and a specially developed belt guide system ensure maximum running smoothness. Technical data: Conveying length, middle radius (NL): 1,100 mm Frame width (NB): 770 mm, with motor 940 mm Belt width (GuB): 600 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° Support feet: optionally available Conveying speed (v m/s): 0.8 m/s, frequency converter available at extra cost Drive: SEW geared motor SA47/T DT80N4 Electrical data: 50Hz V220-240, kW 0.75 / S1 Year of manufacture: 2001 Special features / accessories: One-sided lateral guides included Optionally available: Support stands All prices net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional consultation, simply contact us. You can reach us by phone or email. We are happy to assist you in the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Team at Dr. Sonntag GmbH & Co. KG Your expert and point of contact for intralogistics.

Kondisi: bekas, Tahun pembuatan: 2000, Transnorm Belt Curve Conveyor right GKF 70°-730-550 IR600 RA1936 The Transnorm belt curve is fully functional. It is equipped with a SEW brand gear motor. Supports are not included in the scope of delivery but are optionally available upon request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to the low-stress drive system across the entire belt width, extended operating times are no problem. Tapered drums and a specially designed belt guiding system ensure maximum running smoothness. Technical data: Frame width (NB): 730 mm Belt width (GuB): 550 mm Installation height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 70° degrees Support legs: optionally available Conveying speed (v m/s): freely adjustable via frequency inverter between 0.032–1.17 m/s Drive: SEW gear motor Electrical data: 50Hz V380-500, 0.55 kW / S1 Year of manufacture: 2000 Scope of delivery: Without supports Optionally available: Supports Side guides single- or double-sided Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, please contact us directly. Feel free to reach out via phone or email. Bdedpfx Alsk Ablpoaeb We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics.

Kondisi: bekas, Vertical Machining Center FAMUP MC 70 Evolution – Year of manufacture: 2001 • CNC Control: SELCA S3045 • Axis Travels: X = 700 mm, Y = 480 mm, Z = 640 mm • Spindle: • Taper: ISO 40 • Speed: 50 ÷ 10,000 rpm • Power: 18.5 kW (30 min) / 15 kW (continuous) • Tool Changer: • Magazine with 24 ÷ 30 positions • Bidirectional selection • Tool change time: 1.7 sec • Max tool: Ø75 mm, length 280 mm, weight 6 kg • Feed rates: • Working feed: 10,000 mm/min • Rapid traverse: 30,000 mm/min • Positioning accuracy: ±5 µm • Repeatability: ±1.5 µm • Table: Bdjdpewdrdpefx Alaob • Dimensions: 900 x 520 mm • 5 T-slots, 100 mm center distance, width 18 mm • Max load: 400 kg • Cooling system: • Tank capacity: 500 liters • Spindle: 55 L/min at 10 bar • Tool: 225 L/min • Workpiece cleaning: 225 L/min • Base washing: 329 L/min • Dimensions and requirements: • Maximum footprint: 3895 x 2220 x 2870 mm • Weight: 4800 kg • Compressed air: 6 bar • Noise emission: 71.5 dB(A) • Notes: Machine can be inspected under power upon request.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 5,7 kW (7,75 hp), tipe perpindahan gigi: hidrostatik, warna: hijau, berat keseluruhan: 1.995 kg, daya angkat: 2.820 kg/m, tinggi angkat: 8.700 mm, ukuran ban: Rubber tracks, kondisi ban: 100 persen, Tahun pembuatan: 2021, jam operasional: 2 h, Perlengkapan: hidrolik, komputer bawaan, lampu depan tambahan, === TECHNICAL DATA === Year of manufacture: 2021 Operating hours: 2 hrs Max. lifting capacity: 2,820 kg Max. lifting height: 8.7 m Jib reach: 8.205 m Drive: Fully electric (lithium-ion battery) Remote control: Yes (radio remote control) Jib: Included Attachments / Additional equipment: Searcher hook, multi-position outriggers, programmable load moment limiter Track type: Rubber tracks Condition of tracks: Very good / as new Weight: 1,995 kg CE certification: Yes === HIGHLIGHTS === Carefully selected from reliable sources with fully traceable history CE certificate and complete documentation available Immediately operational and ready for transport Comprehensive technical documentation available Fully electric zero-emission mini crane Lithium-ion battery with fast charging function Continuous operation possible while charging Compact and lightweight design Multi-position outriggers Bdodpfx Asyidbmjlajb Radio remote control Eco operating modes === CONDITION === Excellent condition (as new) – fully inspected, serviced, and tested by certified specialists. Viewing possible on request. === LOCATION & PRICE === Location: Sittard, Netherlands. Worldwide delivery possible. Price on request (EXW / plus VAT). Reliable first-hand machines with complete service history and professional technical support. Benefit from one of the largest European stocks of new and used machines. All machines are fully inspected, CE-certified, and ready for immediate use. Spare parts and technical support available upon request. === DELIVERY === Crane loading available on request. Flexible shipping options depending on destination and logistical requirements. All transports are professionally organized by the Collé Rental & Sales logistics team.

Tahun pembuatan: 2016, Kondisi: bekas, Mesin jahit benang untuk buku Müller Martini Ventura MC Tahun pembuatan: 2016 Deskripsi: - Commander dengan layar sentuh - Pengaturan otomatis - Pengenalan lembaran optik ASIR: ASIR 3 - 4 + 4 opsi pembukaan - Pemisah blok buku - Penumpuk buku - Venturi Air Bdodpeyzzwasfx Alajb

Tahun pembuatan: 1998, Kondisi: belum diuji (bekas), Fungsionalitas: belum diuji, panjang benda kerja (maks.): 4.200 mm, lebar benda kerja (maks.): 2.200 mm, tinggi tumpukan: 1.000 mm, 1 Bdsdpeyzy Rxofx Alasb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2003, jam operasional: 62.469 h, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 520 mm, produsen pengendali: HEIDENHAIN, model controller: iTNC 530, jumlah sumbu: 5, This 5-axis DECKEL MAHO DMU 70 eVo was manufactured in 2003. It is equipped with a Heidenhain iTNC 530 control unit, HSK 63 tool interface, and a spindle speed of 18,000 rpm. The machine features a tool magazine with 32 positions and a robust coolant system with a capacity of 280 liters. If you are looking for a high-quality milling machine, you should consider the DECKEL MAHO DMU 70 eVo that we are offering for sale. Please contact us for further information about this machine. • Operating hours (as of 04.07.2023): • Service hours: 62,469 h • Spindle hours: 17,307 h • Rotary/tilt axes: • C-axis indexing: 360° • B-axis indexing: 0-180° • Workpiece: • Max. workpiece diameter: 700 mm • Tool system: • Tool magazine: 32 positions • Coolant unit: • Coolant tank capacity: 280 liters • Coolant type: Alusol SL 51 XBB • Cooling method: external coolant supply • Rapid traverse (X/Y/Z): 50 m/min Bdodeydlacopfx Alajb Additional equipment: • Touch probe: TS 641

Kondisi: baru, tinggi angkat: 8.700 mm, Tahun pembuatan: 2023, jam operasional: 1 h, Trans001 Bjdpjxb Sy Njfx Alaedb

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 10024150, Naaimachine Muller Martini Ventura MC-200, Machinesnelheid* Mechanisch van 18 tot 200 cycli/minuut, max. 12.000 cycli/uur, minimale katernlengte 120 mm, maximale katernlengte 510 mm, minimale katernbreedte 75 mm, maximale katernbreedte 320 mm, maximale katerndikte 4 mm, Flapopening min. 8 mm, lage of hoge folioflap, Naaien: standaard aantal steken 13, versprongen 14, Steeklengte 16,5 mm, met/zonder blindsteek mogelijk voor alle steektypes. Naaimachine Muller Martini MC 200. Bsdpfjx Rywksx Alasdb

Kondisi: baru, Untuk katup Herion 70322..... 1 set terdiri dari: 1 piston 34,9/16,5/0/37 POM 1 R15 20,5/32/4 FPM datar Bodpfx Ajv D U H Iolajdb 2 K1 35,2/25/6,5 FPM ring seal alur 1 O-ring 67 x 3 mm

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2017, jam operasional: 12.270 h, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 150 mm, kecepatan spindel (maks.): 6.000 rpm, jarak pergerakan sumbu X: 100 mm, jarak gerak sumbu Z: 220 mm, gerak cepat sumbu X: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, jenis arus masuk: tiga fasa, berat keseluruhan: 5.700 kg, hidung spindel: JIS A2-5, tegangan masuk: 400 V, Jumlah stasiun alat bermotor di turret alat 1: 10, Jumlah stasiun alat pada turret alat 2: 10, CNC-Drehmaschine DMG MORI NRX2000 MC TECHNISCHE DATEN: Baujahr: 2017 CNC-Steuerung: MITSUBISHI M730UM Max. Drehdurchmesser: 150 mm Verfahrweg X-Achse: 100 mm Verfahrweg Z-Achse: 220 mm Eilgang X1-Achse: 30.000 mm/min Eilgang X2-Achse: 30.000 mm/min Eilgang Z1-Achse: 30.000 mm/min Eilgang Z2-Achse: 30.000 mm/min Spindelaufnahme: JIS A2-5 Max. Bearbeitungslänge Spindel 1: 100 mm Max. Bearbeitungslänge Spindel 2: 100 mm Max. Spindeldrehzahl - Spindel 1: 6.000 U/min Max. Spindeldrehzahl - Spindel 2: 6.000 U/min Antriebsleistung angetriebene Werkzeuge - Revolver 1: 1,5 kW Antriebsleistung angetriebene Werkzeuge - Revolver 2: 1,2 kW Anzahl Werkzeugplätze - Revolver 1: 10 Max. Drehzahl angetriebene Werkzeuge - Revolver 1: 10.000 U/min Anzahl Werkzeugplätze - Revolver 2: 10 Max. Drehzahl angetriebene Werkzeuge - Revolver 2: 10.000 U/min Gesamtanschlusswert: 38 kVA Versorgungsspannung: 400 V Betriebsstunden: 12.270 h Maschinengewicht: 5.700 kg ZUBEHÖR IM LIEFERUMFANG: Bdjdeyzgc Uspfx Alaob x1 Portal-Lader x2 Werkstückspeicher (links + rechts) für Rohmaterial und Fertigteile x1 RENISHAW Messtaster, Typ RLP40 (NEU) x1 Bohrerbruchdetektor (für Revolver Nr. 1) x19 stationäre Werkzeughalter x4 angetriebene Werkzeughalter axial gx2 KITAGAWA Spannzangenfutter, Typ KLAMP DKF65 x2 Dreibackenfutter x1 Statusanzeige-Lampe x1 Kühlmittelpistole x2 Fernbedien-Handräder x1 Ölnebelabsaugung x1 Späneförderer x1 Hochdruck-Kühlmittelsystem, 35 bar x1 SIEBEC Kühlschmierstoff-Filtrationseinheit Typ MP52D-AP18 x1 Greifersatz für den Portal-Lader x1 Satz Achsverriegelungen für den Maschinentransport x1 vollständiger Satz Handbücher (Bedienungsanleitung, Programmieranleitung, Stromlaufpläne, Portal-Lader-Handbuch ...) Die Maschine kann nach Terminvereinbarung unter Strom in unserem Hause besichtigt werden. Preis auf Anfrage, Verladung auf LKW inbegriffen. Weltweiter Versand möglich. Alle Angaben nach bestem Wissen, eine Gewähr für die Richtigkeit besteht nicht. Werkzeugmaschine vergleichbar mit Dreh-Fräs-Zentrum, Bearbeitungszentrum und Fräsmaschine sowie mit Marken wie Schaublin, Index, Mori Seiki, Traub, Tsugami, Star, Tornos, Biglia, Nakamura, Miyano, DMG, Mazak. CNC-Drehmaschine, NC-Drehmaschine, Digitaldrehmaschine, Bearbeitungszentrum, NC-Fräsmaschine, CNC-Fräsmaschine, Digitalfräsmaschine, Fanuc, iTNC, TNC, Heidenhain, Mori Seiki, Mazak, Hurco, Nakamura, Takamura, Hardinge.

Kondisi: bekas, Tahun pembuatan: 1998, de-to-hu-it-lt Bdjdpfexb Efrex Alasb

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2021, crane portal 2x35 ton, bentang 25 atau 28 meter Bdjdpfxoggggpj Alajb

Kondisi: siap digunakan (bekas), Gaya tekan: sekitar 700 kN (sekitar 70 ton) Daya motor: sekitar 11 kW Catu daya: 3 × 400 V / 50 Hz Berat satu bal: hingga sekitar 600 kg Dimensi bal: sekitar 1100 × 1100 × 1200 mm Dimensi mesin: sekitar 5,9 m panjang, 2,5 m lebar, sekitar 2,6 m tinggi Berat mesin: sekitar 7 ton Waktu siklus: sekitar 45–47 detik Bdjdpfx Aera Dddelajb Fitur konstruksi - Bukaan pengisian besar untuk karton - Kemungkinan pengisian otomatis (misal: dengan konveyor) - Pengikatan kawat manual (4 kawat) - Pengunci palet dan pintu hidraulik untuk pengambilan bal Keunggulan mesin press ini - Bal besar, lebih sedikit transportasi - Gaya tekan tinggi - Dirancang untuk operasi kontinu Tahun produksi tersedia: 2016-2020

Kondisi: bekas, uzq4nfnhd7 Bjdpoy D A Eqofx Alaodb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, en-de-001 Bjdpfsyrqnusx Alajdb