Beli Martin T41 bekas (641)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 1.500 kg, Tahun pembuatan: 2002, Erkat ER850-5, alat penggembur tanah yang dipasang pada ekskavator Gedpfx Aoz Dgliedqskc Tahun pembuatan 2002 Sistem pemasangan MS10 Tekanan kerja 320 Bar Berat sekitar 1.500 kg Lebar kepala pemotong 850 mm

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, daya: 117 kW (159,08 hp), jenis bahan bakar: diesel, warna: emas, berat operasi: 25.700 kg, Tahun pembuatan: 2011, jam operasional: 15.000 h, Perlengkapan: boom yang dapat disesuaikan, kabin, kamera belakang, pendingin udara, Excavator berantai CAT 323 D Gksdjz Da Udspfx Adqoc Tahun pembuatan 2011 15.000 jam 117 kW, mesin Mitsubishi 6 silinder 25.700 kg Lengan dengan penyesuaian panjang Kamera Sistem pendingin udara otomatis Tidak dilengkapi dengan alat pengganti cepat Tidak dilengkapi dengan bucket Lebar roda 3 m

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, daya: 45,5 kW (61,86 hp), jenis bahan bakar: diesel, warna: merah, berat operasi: 7.290 kg, konfigurasi gandar: 2 gandar, Tahun pembuatan: 2019, jam operasional: 4.300 h, Perlengkapan: boom yang dapat disesuaikan, hidrolika gripper, kabin, kamera belakang, palu hidrolik, pendingin udara, penggerak semua roda, perangkat ganti cepat, sistem pelumasan terpusat, Wacker Neuson EW65, Ekskavator Roda Bergerak Tahun pembuatan 2019 4.300 jam 7.290 kg Mesin Perkins, 45,5 kW 30 km/jam Lengan derek yang dapat diperpanjang Sistem kemiringan hidrolik dengan pengganti cepat 3 x ember: 125 cm, 60 cm, dan 40 cm Semua saluran AC Gkodpfxez A Dmbe Adqsc Sistem pelumasan sentral Filter partikel jelaga Kamera mundur Lebar tapak: sekitar 208 cm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Rentang pergerakan sumbu X Y Z: 660mm x 406mm x 508mm, Gksdpfez Hayrox Adqjc ukuran meja 762mm x 356mm, spindel 10.000 rpm, ATC 20 posisi, tirus spindel DIN40, kontrol Hurco WINMAX 5, cairan pendingin, Pengumpul serpihan

Kondisi: baik (bekas), Tahun pembuatan: 2020, Jarak tempuh sumbu X Y Z: 762 x 508 x 610 mm, Meja kerja: 1020 x 510 mm, Kecepatan spindel: 40 – 12000 rpm, Gsdpfx Aez Ha Ayedqjkc Pengontrol Hurco Winmax 5, Tirus spindel: DIN40, 30 pengubah alat otomatis (ATC), Pendingin, lampu tegangan rendah, konveyor serpihan.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, daya: 42,5 kW (57,78 hp), jenis bahan bakar: diesel, berat operasi: 600 kg, konfigurasi gandar: 2 gandar, Tahun pembuatan: 1997, jam operasional: 11.900 h, Perlengkapan: garpu palet, kabin, perangkat ganti cepat, sekop standar, Zettelmeyer ZL602C, Traktor dengan Penggerak Roda Tahun Pembuatan 1997 11.900 jam Mesin Deutz 42,5 kW, 4 silinder Berat sekitar 6.000 kg Gksdpfx Adoz Hc E Rjqec Dilengkapi dengan garpu + sekop + sistem penggantian cepat

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, daya: 71 kW (96,53 hp), warna: emas, berat operasi: 9.000 kg, Tahun pembuatan: 2005, jam operasional: 7.000 h, Perlengkapan: garpu palet, kabin, perangkat ganti cepat, sekop standar, Volvo L40 B TP, Mesin Pemuat Roda Tahun Pembuatan 2005 Gkedpez E R Dfsfx Adqjc 7.000 jam 9.000 kg Mesin Volvo, 71 kW Garpu + Sekop Sistem Pengganti Cepat Sirkuit Kontrol Tambahan

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 300 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 250 mm, produsen pengendali: MITSUBISHI, kecepatan spindel (maks.): 15.000 rpm, RINCIAN TEKNIS Rentang pergerakan sumbu X: 300 mm Rentang pergerakan sumbu Y: 250 mm Rentang pergerakan sumbu Z: 250 mm Rentang kecepatan: 60–15.000 RPM Pengaturan kecepatan: tanpa tingkatan Pengubah alat: vertikal Jumlah tempat majalah: 12 Penyangga alat: SK 30 Luas permukaan penjepit: 400 × 250 mm RINCIAN MESIN Sistem kontrol lintasan: MITSUBISHI Lebar rahang: 100 mm Godpfxez Hxb Us Adqokc PERALATAN Meja sudut tetap Pengubah palet ganda 4 × penjepit Allmatic Berbagai penyangga alat SK 30 Roda tangan elektronik Kabin pelindung penuh dengan pintu geser dan lampu interior Sistem pendingin dengan filter pita kertas Sistem pendingin Lampu sinyal dua warna Konveyor serpihan 6 × alas mesin Buku panduan pengoperasian

Kondisi: bekas, berat muatan maksimum: 33.579 kg, berat keseluruhan: 42.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 07/2018, inspeksi berikutnya (TÜV): 02/2027, panjang total: 14.040 mm, lebar total: 2.600 mm, tinggi total: 4.000 mm, Tahun pembuatan: 2018,

Kondisi: bekas, jarak tempuh: 914.997 km, daya: 250 kW (339,91 hp), pendaftaran pertama: 03/2017, jenis bahan bakar: diesel, berat keseluruhan: 20.500 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 03/2027, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2017, Perlengkapan: ABS, pemanas parkir, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, jarak tempuh: 1.065.000 km, daya: 204 kW (277,36 hp), pendaftaran pertama: 04/2015, jenis bahan bakar: diesel, berat keseluruhan: 21.000 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 04/2027, warna: putih, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2015, Perlengkapan: ABS, filter jelaga, pendingin udara, program stabilitas elektronik (ESP),

Tahun pembuatan: 2020, Kondisi: bekas, Baru: Tidak Tujuan Penggunaan: Konstruksi Gkedpfxez Riils Adqsc Nomor Seri: 830.5.3062 Hubungi Christopher Oldenburg untuk informasi lebih lanjut. SENNEBOGEN EXCAVATOR BERBASIS RANTAI SERI 830 R - E (STANDAR EMISI EU TAHAP V/TIER 4 FINAL) CATATAN: PERSONEL TERLATIH DIPERLUKAN UNTUK PEMASANGAN DAN PEMELIHARAAN. CHASIS RANTAI TELESKOPIK R-HDD T41/380 HIDRAULIK 700 MM PLAT LANTAI 3 TINGKAT (RANTAI) B6 (55 TAUTAN), DIBATASI UNTUK T41/380 KONTROL PENGGERAK MELALUI PEDAL 2 TINGKAT MOTOR PENGGERAK PENYESUAIAN KABIN E270, DAPAT DIMIRINGKAN 30° PERINGATAN KEAMANAN KABIN SENNEBOGEN MAXCAB YANG NYAMAN KURSI PENGEMUDI YANG NYAMAN DENGAN SUSPENSI UDARA SABUK PENGAMAN / 2 INCI PENGHAPUS ANGIN UNTUK KACA ATAP DENGAN SISTEM PENCUCI PENGHAPUS ANGIN UNTUK KACA DEPAN KABIN BAWAH DENGAN SISTEM PENCUCI KISI PELINDUNG FOPS UNTUK ATAP (TINGKAT 2) KISI UNTUK KACA DEPAN TIRAI UNTUK JENDELA ATAP, BAGIAN DALAM TIRAI UNTUK KACA DEPAN, BAGIAN DALAM KACA DEPAN KABIN DENGAN KONSTRUKSI KACA LAMINASI JENDELA ATAP DENGAN KONSTRUKSI KACA LAMINASI KACA PENGAMAN POLIKARBONAT UNTUK KACA KABIN KIRI/KANAN RADIO DENGAN USB, MP3, BLUETOOTH REM PUTAR POSISI MELALUI PEDAL PEMADAM API PORTABEL TIPE PD6 (1 UNIT) PLATINUM DI SAMPING KABIN DENGAN PEGANGAN YANG DIPASANG SECARA PERMANEN PELUMAS STANDAR (TIDAK TERMASUK MINYAK HIDRAULIK) MINYAK HIDRAULIK SHELL TELLUS S2 VA 46 SENNEBOGEN HYDRO-CLEAN K17 ULM PERALATAN KERJA: 10,5M + 7,1M + 830 R-HDD STEKER PERGANTIAN CEPAT YANG DAPAT DIPASANG DENGAN MENGGUNAKAN SEKRUP DENGAN KONEKTOR PELINDUNG BATANG PISTON UNTUK SILINDER ULM CATATAN - PERHATIKAN PERSYARATAN HIDRAULIK UNTUK PERALATAN TAMBAHAN HIDRAULIK ULM TERMASUK KONTROL ALAT DENGAN SALURAN KEMBALI TANPA TEKANAN TAMBAHAN PEWARNAAN STANDAR RAL 7038 / RAL 6018 / RAL 7022 1 LAMPU LED DI ATAP KABIN, MENGHADAP KE BELAKANG 2 LAMPU LED DI BATANG (1 DI KIRI DAN 1 DI KANAN) 1 LAMPU LED DI BAGIAN BAWAH BOOM MANUAL OPERASI DAN PEMELIHARAAN DALAM BAHASA JERMAN DAN INGGRIS KATALOG Suku CADANG DIGITAL TERSEDIA SECARA ONLINE PENGHITUNG JAM KERJA MEKANIK SISTEM TELEMETRI SENTRACK DS PENUTUP DI BAWAH KABIN MAXCAB, DIBUAT DARI BAJA GALVANIS PENGGANTI CEPAT OQ 70/55, HIDRAULIK

Kondisi: bekas, jarak tempuh: 655.000 km, daya: 261 kW (354,86 hp), pendaftaran pertama: 01/2018, jenis bahan bakar: diesel, berat keseluruhan: 20.500 kg, konfigurasi gandar: 2 gandar, inspeksi berikutnya (TÜV): 01/2027, warna: biru, tipe perpindahan gigi: otomatis, kelas emisi: Euro 6, Tahun pembuatan: 2018, Perlengkapan: ABS, filter jelaga, pendingin udara, program stabilitas elektronik (ESP),

Kondisi: bekas, berat muatan maksimum: 23.770 kg, berat keseluruhan: 30.000 kg, konfigurasi gandar: 2 gandar, pendaftaran pertama: 04/2004, panjang total: 13.940 mm, lebar total: 2.550 mm, tinggi total: 4.000 mm, Tahun pembuatan: 2004,

Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Press Brake PBO-3225-CNC OT-41 Technical Specifications - Rated pressure: 2500 kN - Maximum bending length: 3200 mm - Throat depth (distance between tool and rear wall): 400 mm - Maximum ram stroke: 250 mm - Maximum open height: 535 mm - Distance between side frames: 2500 mm - Maximum backgauge travel: 600 mm - Motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11,700.0 kg Tooling - Front sheet supports: 2 pcs - Backgauge distance adjustment (X-axis): Servo drive - Ram adjustment (Y-axis): Servo drive - Height adjustment of stop fingers (R-axis): Manual - Punch clamping system: AMADA-type quick-change CNC OT-41 Control The Otinus CNC control system features a user-friendly and intuitive menu. The software automatically calculates the bending angle. The large color touchscreen is clearly visible from any angle. Manual Crowning (optional*) This feature ensures consistent bending angles along the entire length of the sheet. Automatic Crowning (optional*) Allows the controller to monitor and adjust crowning automatically, ensuring optimal settings at all times. OCS - Oil Cooling System The oil cooling system guarantees stable machine performance even during prolonged continuous operation. Professional Support We maintain direct contact with our customers and, upon purchase, provide a package of professional support hours by Otinus technicians. Experience our machines firsthand Participate in a demonstration led by a qualified Otinus technician, who will showcase the machine’s full capabilities. You may provide technical drawings and sample materials. Scope of supply: 2-day operator training & commissioning - Day 1 (up to 8 hours): Commissioning and control training - Day 2 (up to 8 hours): Independent operation under technician supervision – including programming of specific parts Telephone expert support - From 7:30 to 21:00 (Mon-Sat): An 8-hour package to be used within 12 months. Free rental of transport rollers and two lifting jacks to facilitate machine positioning at the customer's site. Rollers and jacks must be requested at least 7 days prior to delivery. Terms of cooperation - 24-month warranty period. Gksdpfxeh Rdvae Adqsc - Delivery time: approx. 6-8 weeks, Not applicable if the machine is marked as available from stock. - The machine is brand new - Warranty and post-warranty service provided by the seller - The customer is responsible for the machine during unloading and transport on their premises.

Kondisi: siap digunakan (bekas), DE: AUF LAGER 2 x 1555 Zuführgeräte FR: EN STOCK 2 x 1555 dispositifs d’alimentation Gkedpjir E Riefx Adqec IT: IN PRONTA CONSEGNA 2 x 1555 alimentatori ES: EN STOCK 2 x 1555 alimentadores PL: DOSTĘPNE OD RĘKI 2 x podajniki 1555

Kondisi: siap digunakan (bekas), Cocok untuk MM 321 saddle stitcher dengan feeder MM 1532, Harga £5.000 TERSEDIA Gedpfxjir E Rqs Adqekc

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Extol – Coordinate Measuring Machine by Aberlink Gkedpfx Asvwa Scodqsc Extol is Aberlink’s coordinate measuring machine, engineered for precise measurement processes in industrial applications. This machine stands out due to its high measurement accuracy and robust construction, making it ideal for demanding manufacturing and quality control operations. Key Features: High Precision: Extol delivers precise measurement results, supporting reliable quality assurance. Robust Construction: With its durable build, Extol is perfectly suited for continuous industrial use. Easy Integration: The machine can be seamlessly integrated into existing production workflows, optimizing your manufacturing processes. Choose Extol by Aberlink – for precise, reliable, and efficient measurement technology in your production.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 1300 x 1700 x 2550 mm Weight: 1200 kg Total Power Requirement: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces are an ideal solution for energy recovery in woodworking industrial and craft businesses. They have been developed specifically for heating larger utility areas, such as workshops and workspaces in craft and industrial settings. These hot air systems do not require long heat-up phases and can warm up the workshop, carpentry, joinery, or other production facilities within a very short time. Suitable fuels include solid wood and its by-products, e.g., offcuts from solid wood panels, wood chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24th, 1996, and the safety guidelines of Directive 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, and 350) comply with both stages of the 1st German Federal Emission Control Ordinance (1. BImSchV) regarding exhaust gas limits. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output: 199,000 kcal - Fuel consumption: 50 kg/h - Air flow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air blower: 1.96 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable volume: approx. 4500 m³ - Heatable area: approx. 900 m² - Required installation space: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connector): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet stubs: 2 x Ø 450 mm - For further technical data, please refer to the provided datasheet Gkodpfxjvz Hqge Adqsc The 2 hot air outlet nozzles are located on the rear side of the furnace in the lower area. A maximum of 20 meters of ducting per outlet nozzle is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, en: Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Warm Air Furnace MARTINA 30-15 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft operations. They are designed for heating larger usable areas, such as production halls and workspaces in craft and industrial businesses. These warm air systems require no long preheating period and are able to heat up the workshop or joinery, as well as other production sites, within a very short amount of time. The fuel can consist of solid wood and its by-products, e.g. remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of 24 July 96, and the safety guideline of Directive 89/392 CE. All warm air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by 1st BImSchV. - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 kcal - Fuel consumption: 4.5 kg/h - Air delivery: 2,400 m³/h - Combustion chamber depth: 580 mm - Feed door: 330 x 330 mm - Warm air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable space: approx. 300 m³ Gkjdpfovz Hqtex Adqec - Heatable area: approx. 60 m² - Required space: width 600 mm, depth 800 mm, height 1,900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85-90% - Chimney draft: 11 Pa - Flue gas temperature: 286°C - Warm air outlet connection: 2 x Ø 200 mm - For further technical details, please refer to the attached data sheet The 2 pipe connections for outgoing warm air are located at the rear lower section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 800x1170x2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces are the ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed for heating large utility areas such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no lengthy heat-up phases and can warm up the workshop, carpentry, or other production facility in a very short time. Suitable fuels include solid wood and its by-products, for example, remnants of solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guidelines of Directive 89/392 CE. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 comply with both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW Gkodpfx Aevz Hq Tsdqjc - Thermal output: 73,000 kcal - Fuel consumption: 19 kg/h - Air output: 6,400 m³/h - Combustion chamber depth: 840 mm - Feed door: 430 x 430 mm - Hot air blower: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at nominal output: 0.18 mbar - Heatable volume: approx. 1,600 m³ - Heatable area: approx. 300 m² - Required space: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue outlet diameter (connection): 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Flue gas temperature: 291°C - Hot air outlet nozzle: 2 x Ø 220 mm - For further data, please refer to the attached data sheet The two pipe nozzles for the outflowing hot air are located at the rear of the furnace in the lower section. A maximum of 20 metres of pipe per nozzle is permitted for air distribution.

Kondisi: baru, Tahun pembuatan: 2024, Hydraulic Press Brake PBO-3212-CNC OT-41 Technical Specifications - Nominal Pressure: 1250 kN - Maximum bending length: 3200 mm - Throat depth (distance between tool and rear frame): 320 mm - Maximum stroke of the bending beam: 120 mm - Maximum open height: 390 mm - Distance between uprights: 2600 mm - Maximum backgauge stroke: 600 mm - Motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Equipment - Front supports: 2 pcs. - Backgauge distance adjustment (X axis): Servo drive - Ram adjustment (Y axis): Servo drive - Height adjustment of backgauge fingers (R axis): manual - Punch clamping system: AMADA-type quick-change CNC OT-41 Controller The Otinus CNC controller features a user-friendly, intuitive interface. The software automatically calculates bending angles. The large color touchscreen display is clearly visible from any angle. Manual Crowning (optional*) This function ensures consistent bend angle across the entire sheet length. Automatic Crowning (optional*) Allows the controller to monitor and adjust crowning automatically, ensuring optimal parameter settings at all times. OCS - Oil Cooling System The oil cooling system guarantees stable machine parameters, even during prolonged operation. Professional Support We maintain close contact with our customers. With every machine purchase, we offer a package of professional support hours from Otinus technicians. Come and test our machines Take part in a special demonstration where a qualified Otinus technician will present the full functionality of the machine. You are welcome to bring drawings and sample materials. Included with the machine: A 2-day operator training and commissioning - Day 1 (up to 8 hours): Commissioning and controller training. - Day 2 (up to 8 hours): Independent operation under supervision—possibility to program specific parts. Telephone support from a specialist - 7:30 am to 9:00 pm (Mon–Sat): An 8-hour support package, to be used within 12 months. Free rental of transport rollers and two jacks for easier installation at the customer site. The rollers and jacks are provided upon request (at least 7 days prior to delivery). Gsdpfx Adogi Dk Doqjkc Terms of Cooperation - 24-month warranty period. - Delivery time: approx. 6–8 weeks. Does not apply if marked as available from stock. - The machine is brand new - Warranty and post-warranty service by the seller - The customer is responsible for the machine during unloading and transport on their premises.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, en-Baty SM350 Profile Projector – High-Performance Inspection for Demanding Applications Gkjdpfx Adouyh Rpsqsc The Baty SM350 is an advanced profile projector featuring a 350 mm screen and a robust, high-precision staging table with a measuring range of 250 mm x 125 mm. It is ideally suited for precise optical inspections in settings where reliability and accuracy are of utmost importance. XLS: A simple 2-axis digital readout for X and Y measurements, ideal for basic applications. MX200: This model expands capabilities to include geometric measurements, such as angle, radius, and distance calculations, and enables the generation of tolerance reports. FT2: The most advanced version offers a touchscreen interface with Fusion 2D software. This model provides optical edge detection and comprehensive reporting, including SPC charts and DXF overlays. The device is equipped with a 3-position lens turret, allowing for quick and easy switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also provides advanced measurement features such as edge detection and DXF overlay. These functions make it the ideal solution for detailed inspections and demanding measurement tasks in manufacturing industries.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, Baty Venture XT – Precise Multi-Sensor Measuring System The Baty Venture XT is a highly advanced vision measuring system developed to meet a wide range of measurement requirements. It is available in three different variants, each covering specific applications: Venture XT VI-2510-MAN (Manual) This manual version is ideal for operators who prefer the flexibility of direct control. With a large measuring range of 250 mm x 100 mm, the manual variant provides precise optical measurements and is perfect for inspecting small and medium-sized workpieces. The device is operated using a joystick and offers user-friendly operation, while Fusion 3D software ensures accurate and reliable data capture. Venture XT VI-2510-CNC (CNC) This CNC variant offers fully automated measuring processes for repeatable and precise batch measurements. With a measurement range of 250 mm x 100 mm, it is ideal for companies performing frequent measurements in production environments. The combination of optical and tactile measurement methods ensures comprehensive data collection. The Fusion 3D software enables straightforward creation and storage of programs, making the inspection process more efficient. Venture XT VI-3030-CNC-XT (Advanced CNC) The advanced CNC variant offers even greater flexibility with a larger measuring range of 300 mm x 300 mm x 200 mm along with additional features. This model is especially suited to complex and large workpieces requiring high-precision inspection. The fully programmable zoom optics (6.5:1) allow the system to be flexibly adapted to varying measurement requirements. With Fusion 3D software, complex programs can be automatically generated, covering both optical and tactile measurements. Gkedpfx Adouyh R Nsqoc Key Features Shared by All Models: • Optical and tactile measurement methods: Each Venture XT system combines non-contact, camera-based measurement with tactile measurement via a touch probe. • Fusion 3D software: All variants utilize the powerful Fusion 3D software, which supports CAD import/export, SPC analyses, and DXF overlays. • Programmable LED illumination: Available across all variants to ensure optimal lighting of the items being measured. The Venture XT is the ideal solution for companies looking for a flexible and precise measuring solution—whether for manual, motorized, or fully automated processes.

Kondisi: baru, Bernardo Universal Lathe Smart 410 x 1000 Pro Gkjdpfx Adsxl Dx Ejqsc Technical Specifications Centre distance: 1000 mm Centre height: 210 mm Swing over bed: 420 mm Swing over gap: 580 mm Swing over cross slide: 255 mm Bed width: 250 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1 – 6 Speed range (16): 45 – 1800 rpm Longitudinal feed range (17): 0.05 – 1.7 mm/rev Cross feed range (17): 0.025 – 0.85 mm/rev Metric threads (42): 0.2 – 14 mm Inch threads (45): 2 – 72 TPI Quill diameter: 50 mm Quill travel: 140 mm Quill taper: MT 4 Motor power: 3.0 / 4.5 kW Machine dimensions (L x W x H): 2070 x 900 x 1600 mm Weight approx.: 1220 kg Features • Prism bed made from grey cast iron, induction hardened and precision ground • Electromechanical foot brake to minimize auxiliary times • Central, user-friendly control for feeds and threads with leadscrew and feed rod • Modern main spindle bearing with precision angular contact ball bearings • Gears are oversized, hardened, and precision ground • Hardened and ground gears and shafts, also in the feed gearbox • Simple, smooth-running, and precise speed and feed adjustment • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge enables machining of large-diameter workpieces Scope of Delivery • Prism bed made from grey cast iron, induction hardened and precision ground • Electromechanical foot brake to minimize auxiliary times • Central, user-friendly control for feeds and threads with leadscrew and feed rod • Modern main spindle bearing with precision angular contact ball bearings • Gears are oversized, hardened, and precision ground • Hardened and ground gears and shafts, also in the feed gearbox • Simple, smooth-running, and precise speed and feed adjustment • Adjustable tailstock for taper turning, handwheel with adjustable fine scale (0.02 mm) • Removable gap bridge enables machining of large-diameter workpieces