Beli Mesin Bor Pasak Dengan Sisipan Pasak bekas (78.226)

Kondisi: bekas, Tahun pembuatan: 1997, Mesin bekas Tahun pembuatan: 1997 Kondisi: telah diperiksa bengkel Kepala bor fitting Unit bor dengan 3/4 spindle Hsdpfxszk Nu Ao Aa Donp 2 silinder penjepit Daya motor: 0,8 kW Koneksi: 400/50 Volt / Hz Dimensi mesin: Panjang: 950 mm Lebar: 650 mm Tinggi: 700 mm Berat: 80 kg Ketersediaan: segera Lokasi: Röllbach

Kondisi: bekas, Tahun pembuatan: 1997, Mesin bekas Tahun pembuatan: 1997 Kondisi: terawat Perlengkapan dan data teknis: Hnedpfezk Nuijx Aa Dep - Jumlah spindle bor: 21 unit, jarak 32 mm - Arah pengeboran: dari bawah & sisi depan - Sudut putar: 0-90 derajat dengan roda tangan - Penjepit material pneumatik: 3 unit - Bukaan maximal: tinggi 100 mm dan lebar 640 mm - Motor: 1,5 kW - Diameter saluran hisap: 120 mm - Termasuk berbagai pembatas (lihat gambar) Ketersediaan: segera Lokasi penyimpanan: Röllbach

Kondisi: bekas, Exhibition machine Condition: as new Scope of delivery: Device case Device Operating manual Bit This item is an unused exhibition unit. Hjdpfxszk Ntro Aa Djnp

Kondisi: bekas, Mesin bekas Perlengkapan dan data teknis: - Mesin bor deret dua sisi - 2 motor bor @ 1,8 kW, dengan silinder rem oli - Stroke maks. 130 mm - dengan katup pengalihan pneumatik - 21 spindle, jarak spindle 32 mm - Jarak pengeboran maks. 640 mm (dengan menggeser benda kerja maks. 2656 mm) - Lebar portal 850 mm - Konsumsi udara pada 5 bar sekitar 11 l per siklus - Sambungan ekstraksi 160 mm Ukuran: kira-kira 3100 x 1100 x 1800 mm Hodpfx Aaozk Nrbj Denp Berat: sekitar 350 kg Ketersediaan: langsung Lokasi gudang: 63934 Röllbach

Kondisi: bekas, Exhibition machine Condition: as new Scope of delivery: Hnjdpfx Aezk Nkwsa Dsp Device case Device Operating manual Bit This item is an unused exhibition unit.

Kondisi: bekas, Tahun pembuatan: 2023, Mesin Bekas Tahun Pembuatan: 2023 Kondisi: seperti baru, hanya beberapa pengeboran yang dilakukan Peralatan dan Data Teknis: Kecepatan spindel: 3.000 putaran/menit Lebar pengeboran: 240 mm Kedalaman pengeboran maksimum pada 90°: 180 mm Pengaturan ketinggian kepala pengebor: 160 mm Rentang penjepitan perkakas: 0 – 20 mm Putaran meja kerja: ±60° Panjang meja kerja: 565 mm Hjdpfx Aajzk Ni To Donp Lebar meja kerja: 315 mm Diameter saluran penghisap: 90 mm Daya keluaran: 2,2 kW Tegangan sambungan: 400 V Frekuensi jaringan: 50 Hz Dimensi: 1.290 × 980 × 1.270 mm Berat: 260 kg Ketersediaan: dalam waktu dekat Lokasi penyimpanan: Röllbach

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Gerinda Mata Bor Otomatis Universal Brierley Hnjdpfx Aozlhlpoa Dsp Model: ZB 32 Kapasitas: 2,5-32 mm Dilengkapi dengan Cam

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar total: 355 mm, panjang total: 381 mm, tinggi total: 1.270 mm, diameter roda gerinda: 203 mm, Mesin Gerinda Mata Bor Otomatis Dormer Hnsdpszlg Szefx Aa Dep Model: 108

Kondisi: bekas, Tahun pembuatan: 1998, Mesin Bekas Tahun Pembuatan 1998 Hodpfxezk Nzpj Aa Donp Dengan mesin ini, lubang dapat dibuat untuk bantalan sudut, jendela atas, dan lubang untuk pengikat pada rangka kayu yang terpasang secara longgar atau tertekan. Pengukuran dilakukan pada alur. Delapan penopang untuk bantalan sudut dan jendela atas, serta untuk kayu pengganjal dan kayu penyangga, akan berfungsi secara otomatis setelah kayu ditempatkan. Mesin ini memiliki urutan program otomatis, dengan penggerak elektrik untuk motor pengebor, yang diaktifkan oleh pedal kaki pengaman. Sambungan pneumatik R 1/4, 5-6 bar Kecepatan hisap 25 m/detik. Diameter saluran hisap 120 mm Sambungan listrik 0,75 kW Ukuran yang dibutuhkan 2950 x 650 x 1100 mm Ketersediaan: dalam waktu dekat Lokasi penyimpanan: Flörsheim

Kondisi: bekas, Tahun pembuatan: 1984, Mesin bekas Tahun pembuatan: 1984 Hnjdpfjzk Nuvox Aa Dep Mesin bor universal untuk dowel dengan agregat bor yang dapat diputar dengan kontrol otomatis penuh dengan 2 penjepit udara tekan pengaman Motor gearbox bor 2,2 kW dengan 21 spindle Jarak antar spindle 32 mm dengan peredam oli terpasang Penyesuaian ketinggian 80 mm Kedalaman bor 80 mm Dimensi: 140x88x160 Berat: 420 kg Ketersediaan: segera Lokasi: Flörsheim

Kondisi: bekas, Tahun pembuatan: 2002, Mesin bekas Tahun pembuatan: 2002 Ukuran meja: 580 x 280 mm Tinggi meja bor: 800 mm Kedalaman bor: 150 mm Panjang bor: 225 mm dengan chuck bor Wescott 0-20 mm Penyesuaian tinggi: 120 mm Rentang putar unit bor: 2 x 45° dengan 2 penjepit eksentrik dengan pengoperasian satu tangan dengan perangkat bor untuk sambungan kayu dengan pengukur jam di roda tangan dengan tampilan digital dengan 2 kecepatan 1400 dan 2800 rpm dengan perangkat penggerak PxLxT 850x1000x1050 mm Berat sekitar 240 kg Ketersediaan: segera Hjdpfxozk Nupe Aa Donp Lokasi gudang: Flörsheim

Kondisi: bekas, Mesin bekas untuk pengeboran dowel pada sisi datar atau ujung dengan poros bor berbearing rol dengan kopling cakar berbentuk kerucut Penggerak melalui bor tangan apa saja Lebar kerja 650 mm dengan 7 poros bor Balok bor dapat diputar 0° - 45° - 90° Tinggi penjepitan 80 mm Jarak lubang bor terkecil 30 mm Ketersediaan: segera Lokasi stok: Flörsheim Hnjdpfezk Nq Dex Aa Dep

Kondisi: bekas, Tahun pembuatan: 2018, Mesin Bekas Tahun Pembuatan 2018 Peralatan dan Data Teknis: - Pengaturan kedalaman pengeboran dilakukan melalui rel linier yang tidak memerlukan perawatan - Pengoperasian yang efisien dan ekonomis melalui sistem pengangkatan cepat, sehingga tidak perlu memutar engkol secara manual - Unit pengeboran yang mudah digerakkan dan dapat disesuaikan secara bertahap - Pengaturan ketinggian dengan penyetelan halus dan silinder gas untuk menyeimbangkan berat - Pengaturan gerakan menyamping dan ketinggian dengan skala dan pemberhenti yang dapat disesuaikan - Pengoperasian bebas getaran melalui konstruksi baja yang kuat - Kedalaman pengeboran dapat diatur melalui skala dan pemberhenti - Pengaturan ketinggian kepala bor dapat digunakan sepenuhnya untuk membuat alur vertikal - Meja cor abu-abu berukuran besar dengan permukaan yang dipoles - Daya motor: 1,5 / 1,9 kW - Tegangan: 400 V - Kecepatan: 1.400 / 2.850 RPM Hnsdpfxjzk Nlno Aa Djp - Chuck bor Westcott: 0–20 mm - Kedalaman pengeboran maksimum: 220 mm - Lebar pengeboran: 340 mm - Pengaturan ketinggian: 145 mm - Kepala bor dapat diputar: -60° hingga +60° - Ukuran meja bor: 595 × 315 mm - Perluasan meja: 2 × 200 × 220 mm - Tinggi meja bor: 830 mm Dimensi: 1.200 × 1.050 × 1.300 mm Berat: sekitar 240 kg Ketersediaan: dalam waktu dekat Lokasi: Flörsheim

Kondisi: baik (bekas), Tahun pembuatan: 2004, Ref.-No.: 10604 Pabrikan: UNION Tipe: TC 110 Tahun pembuatan: 2004 Jenis kontrol: Kontrol CNC Hsdpozkpv Hofx Aa Djnp Kontrol: SINUMERIK 840 D Powerline Lokasi gudang: Halberstadt Negara asal: Jerman Perjalanan X: 2000 mm Perjalanan Y: 1250 mm Perjalanan Z: 1000 mm Sumbu W: 550 mm Tinggi meja: 1050 mm Diameter spindle: 110 mm Dimensi meja (pxl): 1600 x 1250 mm Jumlah alur-T: 10 Berat benda kerja maksimum: 6000 kg Luas penjepitan: 1250 mm Lebar alur-T: 22 mm Jarak alur-T: 125 mm Jenis holder alat: ISO 50 Torsi maksimum: 1639 Nm Kecepatan feeding sumbu X/Y/Z: 6000 mm/menit Kecepatan rapid X: 15000 mm/menit Kecepatan rapid Y: 15000 mm/menit Kecepatan rapid Z: 15000 mm/menit Gaya feeding X/Y/Z: 16000 x 16000 x 20000 N Sudut putar: 360 ° Informasi tambahan: Termasuk kepala sudut 0,001° Mesin dapat diuji dalam kondisi bertegangan listrik.

Kondisi: bekas, Used Machine Pre-owned Line Boring Machine Ganner Compact 30 Features and Technical Specifications: - 2 drilling beams, each with 15 spindles - 32 mm pitch - Drilling unit position adjustment: 0 – 650 mm - Minimum distance between rows of drilled holes: 190 mm - Spindle speed: 2,800 rpm - Motor power: 2 x 0.75 kW - Maximum clamping height of workpieces: 70 mm - Working height: 850 mm - Compressed air connection: 6 bar Availability: By arrangement Location: Solingen Hedpozk Nwdsfx Aa Donp

Kondisi: bekas, Fungsionalitas: belum diuji, Kode Ferwood: AGG0207 - Kode Produsen: 6314H0080 - Kondisi: Bekas - Fungsionalitas: Belum diuji - Mesin Kompatibel: - Jika berminat, kami menawarkan layanan revisi, silakan hubungi kami. 4,5KG 20X20X20 Hnjdpfxeylal Nj Aa Dop

Tahun pembuatan: 1985, Kondisi: bekas, Spindle diameter: 110 mm X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 200 mm Table length: 1,020 mm Table width: 860 mm Spindle taper: MK 40 Table size approx.: 1,020 x 860 mm Maximum table load: approx. 800 kg Maximum longitudinal table travel (X): 900 mm Maximum transverse headstock travel (Y): 600 mm Maximum spindle stroke (Z): 200 mm Maximum cross-rail vertical adjustment (W): 635 mm Vertical clearance between table/spindle: max. 15 - 850 mm Distance between columns: 950 mm Spindle diameter: 110 mm Spindle taper internal/external: ISO 40 18 spindle speeds: 10 - 2,500 rpm Infinitely variable milling feed, table: 1 - 6,000 mm/min 4 milling feeds, headstock: 30 - 180 mm/min 6 drilling feeds: 0.01 - 0.39 mm/rev Hsdpst Hwyxsfx Aa Donp Positioning accuracy for all 3 axes (as new): 0.003 mm Rapid traverse table/headstock slide/cross rail: 6,000 mm/min Spindle drive power: 6.2 kW Total drive power: approx. 15 kW - 380 V - 50 Hz Machine weight: approx. 9,000 kg Accessories / Special features: - 3-axis CNC control, make: BOSCH MICRO 8, with screen, program input manually, via cassette, and via interface - Digital display for Z-axis - Separate control cabinet, various tools - Oil cooler for spindle lubrication, etc.

Kondisi: bekas, Tahun pembuatan: 1970, Radial drilling capacity in steel (diameter): 32 mm Arm reach: 1000 mm Maximum workpiece height: 1400 mm Total power requirement: 6 kW Machine weight: approx. 3,700 kg Space requirement: approx. [missing value] WEBO Radial drilling machine Model: BR 32 V Year of manufacture: approx. 1970 Serial no. _____ Drilling capacity in cast iron/steel (solid): max. 40 / 32 mm Boring (with 50% pre-drilling): 60 / 80 mm Arm reach: approx. 1,000 mm Spindle taper: MT 4 Quill stroke: 350 mm Spindle speeds, 3 ranges/stepless: 60 - 1,850 rpm Base plate: 1,200 x 930 mm Installation height under the spindle: 200 - 1,400 mm Swivel radius: 360° Vertical adjustment of arm: 980 mm Hnodpfx Aet H Smyja Djp Horizontal movement of drilling saddle: 1,640 mm 9 feed rates: 0.06 – 1.0 mm/revolution Spindle drive: approx. 3 / 4 kW Total drive: 6 kW - 380 V – 50 Hz Weight: approx. 3.7 t Accessories / special equipment: • Manual mechanical clamping of arm and spindle box via hand lever • Automatic feed with depth stop via vernier • Stepless speed control within three gearbox ranges and two motor speeds, adjustable via hand lever • Right and left hand rotation • Electro-motorized vertical adjustment of the arm via cross switch • Ammeter for drilling motor • Coolant system with integrated coolant pump • Fixed drilling table, approx. 800 x 600 x 600 mm (height), vice, etc. Ideal machine for steel construction, toolmaking, and mechanical engineering! Condition: Older but good to very good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: bekas, Number of spindles: 4 Drilling capacity in steel (diameter): 23 mm Hnjdpfxjt Hw U Nj Aa Dep Drilling stroke: 150 mm Total power requirement: ... kW Machine weight approx.: ... t Space requirement approx.: ... m

Kondisi: bekas, Tahun pembuatan: 1965, Maximum core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Maximum drilling diameter: 110 mm Total power requirement: 30 kW Machine weight: approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling diameter: - Solid drilling approx. 2 - 50 mm - Boring approx. 100 mm Maximum drilling depth: 1,600 / optionally up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage: approx. 4,000 mm Distance between the two spindle heads: 5,000 mm Centre height above guideway: 350/450 mm Drilling feed of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Work spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V - 50 Hz Total machine/guideway length: 7,500 / 5,000 mm Total weight: approx. 10,000 kg Accessories / Special configuration: - The machine consists of the following elements: The main spindle on the left, followed by a BOZA, a table unit powered by a ball screw, BOZA with increased centre height, and at the end, a spindle head of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm; very large and complex coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø - Suitable for rotating workpieces/fixed drilling tools (ELB and BTA methods), as well as for stationary workpieces and rotating drilling tools. It can operate with internal oil supply (ELB) or external oil supply (BTA). - Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate: 17/40/120 or 220/500 litres/min, tank capacity approx. 2,500 litres - Feed of the main carriage via ball screw and infinitely variable DC motor. The main carriage currently holds a cross-adjustable table (approx. 500 mm adjustment, table size approx. 800 x 800 mm) for accommodating cubic and cylindrical workpieces. Electrically controlled via a cam track (approx. 2,500 mm) and limit switches for rapid traverse, feed, and return. Hodpfx Aast Hwucs Donp - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck, approx. 315 mm Ø - Modernised control panel with speed display, feed adjustment and display, kW display, feed/rapid traverse switching (left/right), etc. - 2 separate switch cabinets, separate BoZa, sleeves, reducers, clamping aids, and much more. Condition: Good – demonstration ready shortly. Due to the accessories, the machine is very valuable. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further deep hole drilling machines always in stock – please enquire.

Kondisi: bekas, Tahun pembuatan: 1985, Core drilling diameter – max. 18 mm Drilling depth 320 mm Swing diameter mm Total power requirement 33 kW Machine weight approx. 6 t Space requirement approx. m GILDEMEISTER & KNOLL / TBT Horizontal 2-spindle deep hole drilling machine Model 2 M 01-2-320 Year of manufacture 1985 / 1999 retrofit and modernization by TBT _____ Drilling – solid drilling approx. 1 – 18 mm Drilling – counterboring approx. 25 mm Drilling depth 320 mm Hsdpfx Aajt Hwvaj Dsnp Center height above bed/table 150 mm Travel of drilling slide max. approx. 500 mm Travel of positioning slide (linear guides) 500 mm Spindle center distance 125 mm Drilling feed/rapid traverse stepless approx. 35 – 1,000/7,000 mm/min Center distance between the spindles approx. 125 mm Spindle speeds FORTUNA HF spindle up to max. 24,000 rpm (800Hz) Total drive power of the complete machine approx. 33 kW – 400 V – 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: - Machine currently set up for high-precision drilling of injection pump parts (Ø approx. 25 x 150 mm, hole approx. 5 mm) which are loaded via an inclined conveyor into a dual positioning station for correct orientation check, and then automatically and in pairs via a crosswise to the machine mounted loading portal (2 x double grippers) clamped in the machining zone between drilling bush holder and powered tailstock. After machining, the second pair of grippers takes over the workpieces and transfers them to a blow-off and drill breakage detection station. After successful inspection, the workpieces drop into transport containers. - The process programming and monitoring is handled by a SIEMENS OP 17 PLC control. - 2 cooled and oil mist lubricated HF spindles, make FORTUNA, approx. 2/3.5 kW power - Drilling slide feed via GS motor and ball screw spindle - Separate coolant oil system approx. 1,500 liters with various pumps and a sophisticated belt filter purification system - Separate hydraulic system approx. 10 kW - Separate BKW cooling unit for spindle and hydraulic oil cooling - 2 separate electrical and control cabinets, CE-marked Condition: good to very good – soon ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Kondisi: bekas, Tahun pembuatan: 1984, Cycle time 0 sec Total power requirement 2.5 kW Machine weight approx. 1 t Space requirement approx. m P O S A L U X (CH) Horizontal 3-spindle fine boring machine Model: MICROFOR PNC 3 Year of manufacture: 1984 Drilling diameter: 0.15 - 2 mm Spindle stroke: 0 - 18 mm Working stroke max.: 0 - 12 mm Rapid traverse: 60 mm/sec Drilling feed: 0 - 5 mm/sec Spindle speeds: 3,500 - 11,500 rpm Distance between spindles (vertical): approx. 80 mm Table rotation speed (for deburring): approx. 100 rpm Table diameter: approx. 100 mm Table bore: approx. 70 mm Table slide swing device: approx. 60 °/sec Hnjdpfx Ajt Hwvgsa Dep Swivel range: 0 - 100° Total drive approx. 2.5 kW / Weight approx. 1000 kg Accessories / Special equipment # 6.8230/9 Machine equipped with a newer POSALUX-SELECTRON control system with keypad and LED display for direct programming on the machine, based on the crossbar distributor principle. Setting microscope, machine light, left-hand version - in very good condition

Kondisi: sangat baik (bekas), Boring depth 500 mm Spindle speed: 1 O F F E R We can offer you, subject to prior sale and errors, the following from stock, non-binding: DEGEN Universal Deep Hole Drilling Machine Model UTB 500-2 Year of manufacture - _____ Boring depth 650 mm Drilling diameter with twist drill 16 mm Drilling diameter with single-lip drill 25 mm Spindle taper SK40 Stepless feed rate 0-120 mm Rapid traverse rpm Drilling unit vertically adjustable 250 mm Table size 570x1000 mm 4 T-slots 14 mm T-slot spacing 90 mm Table load capacity 1000 kg Table transverse travel 460 mm Table swivels through 360° Weight approx. 1,600 kg Accessories / Special equipment: Hnjdpfexx A D Tox Aa Djp • Compact freestanding design on a robust base • Deep drilling up to 500 mm length possible — ideal for longer drilling operations in metal • The machine is equipped with a coolant system • Optionally with cross-slide feed unit • The machine features digital readouts for X and Y axes (RSF Elektronik type Z 502, 0.01 mm display resolution) • A solid solution for workshops with the need for deep, straight drilling, as long as very large diameters or complex operations are not required • The Degen UTB 500 has been extensively modernized – now with Lenze feed drive, overhauled Y-axis, new glass scale encoder, new spindle bearings and new gas strut – delivering reliable precision and high performance Condition: good to very good – under power and ready for demonstration A video of the machine can be found here (please click the link): UTB 500/4 Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. More tool grinding machines in stock – please enquire!

Kondisi: sangat baik (bekas), Description to follow! Hnjdjw U U Ikepfx Aa Dop

Kondisi: bekas, Tahun pembuatan: 1996, Maximum core drilling diameter: 25 mm Drilling depth: 1000 mm Swing diameter: mm Total power requirement: 25 kW Machine weight approx.: 12.5 t Space requirements approx.: m T B T CNC-controlled horizontal deep hole drilling machine Type: BWP 250 Year of manufacture: 1996, mechanically and electrically overhauled in 2006 Working area: - X axis = Drill carriage travel: approx. 2,000 mm - Z axis = Drill carriage stroke: approx. 1,200 mm - Drilling depth with 2 steadies: approx. 1,000 mm - Y axis = Drill carriage vertical travel: approx. 1,100 mm Table clamping area: 1,200 x 2,000 mm Drilling capacity – solid material: approx. 4 – 25 mm diameter Tool holder: HSK 50 Spindle speed: 1,260 – 15,000 rpm Feeds / rapid traverse for Z/X/Y axes continuously variable: 100 – 10,000 / 15,000 mm/min Hnedpfx Ast Hw Ayoa Djp Feed drive power: 27 Nm / 1,000 daN Spindle drive power: 7 kW Total drive approx.: 30 kW – 400 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special Equipment: - Ideal machine for complete machining of larger workpieces, moulds, and plates using deep hole drilling Ø 25 x 1,000 deep, milling up to Ø 65, keyway milling up to Ø 30, spiral drilling/enlarging up to Ø 30, countersinking, and thread tapping up to M 24 x 3. - SIEMENS 840 D 4-axis CNC control with process monitoring, etc. - High-frequency drilling spindle by GAMFIOR with infinitely variable spindle speeds - Pneumatic workpiece-contact drill sleeve carrier (200 mm), dual-swivel - Fixed 12-pocket tool changer by MIKSCH, Type CTM 40 with 800 mm travel, suitable for spiral drills, end mills and tapping tools; changing from ELB deep hole drills to standard tools is manual - The table is stationary, designed for high workpiece weights and accurate drilling - Mounted on the table: FIBRO CNC rotary indexing table Type RTN 400 = 420 x 420 mm as B-Axis - Optional: Hydraulic FIBRO rotary indexing table, Ø 1,000 mm, for division 3–144 or angle degrees 2.5–120° - Large coolant system approx. 11 kW pump with scraper belt chip conveyor and various filters - 2 support steadies for supporting the deep hole drill shafts - Full machine enclosure with side and front access Condition: very good – a truly rare opportunity, can be demonstrated under power soon Delivery: ex stock here Payment: strictly net upon receipt of invoice We look forward to your order. For further information, please do not hesitate to contact us.