Beli Mesin Flensa Graaf - Hvp 300 bekas (81.018)

Kondisi: baru, Tahun pembuatan: 2024, en Cjdpfx Aoh Hfphsdcsrd

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Wide Belt Sander CB 1300 R+RR Specification: • Condition: used, after comprehensive inspection and calibration Cedpfxew U D Dus Adcsrd • Manufacturer: CB • Model: 2NRKRR13002N • Working width: 1300 mm • 2 sanding units: - First: calibrating drum, hard rubber, diameter 230 mm - Second: 2 drums, hard and soft, each with independent adjustment, diameter 160 mm each • Main motors: 2 x 9.2 kW • Two conveyor feed speeds • Electronic thickness indicator for workpiece • Oscillation with photocell sensors • Table extension rollers • Electric height adjustment (up/down) • Thickness gauge for processed material • Safety sensor preventing insertion of overly thick workpieces • Original paint • Abrasive belt size: 1340 x 2200 mm • Extraction ports: 3 x 180 mm • Weight: approx. 2200 kg • Machine from early 1990s • Overall dimensions: 200 x 220 x 210 cm (L x W x H) Additional Information: • Very good original technical and visual condition • Actual item condition as shown in photos • Possibility to power up and test the machine on site

Tahun pembuatan: 2026, Kondisi: baru, The fruit is conveyed from the sorting table into the washing tank, where the initial cleaning phase begins. Using the conveyor belt, the fruit is transported under the fresh water spray to the desired location for further processing. Credpfxefd E Trs Adcod Technical data: • Rated capacity: 3,000 kg/h • Power requirement: 0.75 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Dimensions: 750 x 2,100 x 2,800 mm • Discharge height: 1,820 mm • Weight: 135 kg • Washing tank water capacity: 280 L • Water consumption: 20–100 L/h (depending on settings) • Water connection: ¾” quick coupling • IP65-rated electrical controls • Machine compliant with EU directives • Minimal maintenance required • Continuously variable belt speed • Easy to operate • Effortless to clean • Swivel castors with brakes

Tahun pembuatan: 2023, Kondisi: baru, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel + aluminum Overall dimensions: 3350/2200/1300 mm Working area: 3100/1520/140 mm XY axis drive with dual-side gantry drive: 4Nm stepper motors with gear units, rack and pinion (accuracy class 8) Z axis drive: stepper motor with ball screw Traverse speed: up to 25 m/min Z axis control system: THC My plasm system Collision protection system safeguarding the torch against damage Linear guides: TBI Automatic material detection system Power supply: 240V Maximum load capacity: 1700 kg Net weight: 1200 kg INCLUDED IN THE SET: - Control console - Water table - Exchangeable grate - Control software in German, English, and Polish - CE declaration of conformity - Technical documentation (DTR) Codpfsh Rabnjx Adcord - Warranty It is possible to select a suitable Hypertherm plasma source tailored to your company’s individual requirements.

Kondisi: baru, Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 6 bulan, lebar total: 360 mm, panjang total: 720 mm, tinggi total: 500 mm, jenis arus masuk: AC (pendingin udara), diameter benda kerja (maks.): 25 mm, berat keseluruhan: 90 kg, tegangan masuk: 400 V, Clamping, separating, and face grinding in one motion The machine features two parallel grinding spindles: one for separating (cutting off) and one for face grinding to final dimension. The desired workpiece length is set with 0.01 mm accuracy on the scale. How to use the prism clamp: - Open prism clamp: Move center lever to the right and insert workpiece - Close prism clamp: Move lever to the left - Separating: Move left lever upward - Face grinding: Move left lever downward - Open prism clamp: Move lever to center and right; remove finished workpiece The grinding wheel can be adjusted and dressed at any time without affecting the set dimension. Design includes motor protection, cover switch, emergency stop, and restart protection. Without manual clamp: - Max. finished workpiece length: 300 mm - Min. finished workpiece length: 54 mm - Workpiece diameter: Ø1–25 mm With manual clamp: - Max. finished workpiece length: 60 mm - Min. finished workpiece length: 12.5 mm - Workpiece diameter: Ø1–10 mm - Ejector with cylindrical head: max. size 6 Max. pre-machining workpiece allowance: 195 mm Length tolerance: +/-0.01 mm Squareness: +/-0.01 mm Weight: 90 kg Dimensions without scale (W x D x H): 430 x 360 x 500 mm Dimensions with scale (W x D x H): 720 x 360 x 500 mm Height with open cover: 950 mm Cut-off wheel, fiberless: SGA60P6BR1, Ø180x1xØ31.75 mm Cup wheel: PA46, Ø100x50x10xØ20 mm Location: Austria / Vienna Condition: New, in stock, 6-month warranty. Includes the following accessories: • 1 x cut-off wheel SGA60P6BR1 with flange, pre-mounted Csdpfx Ajid Ixdsdcjrd • 1 x cup wheel PA46 with flange, pre-mounted • 1 x dressing diamond, pre-mounted • 1 x belt, pre-mounted • 2 x Y-face spanner wrenches • 1 each: Allen keys 3 mm, 5 mm, 3/16'' • 1 x pin spanner 6 mm • 1 x ruler 300 mm • 1 x micrometer screw with scale sleeve • 1 x cleaning brush • 1 x lever • 1 x operating manual, German • 1 x wooden transport crate

Tahun pembuatan: 2022, jam operasional: 396 h, Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: MFT300, 001 Codpfexbtwvox Adcsrd

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, We offer a high-productivity 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the following options: Zirox sensor, single laser, powder bed monitoring. Crjdpfxevu Ticj Adced Trumpf TruPrint 3000 incl. filter unit Serial number: S0721Q0022 Laser runtime: Laser beam on 17,508 hours The system was last used with aluminum AlSi10Mg. The 3D printer has already been dismantled by the manufacturer. Dismantling protocols and functional documentation are available, proving that the machine was operational prior to disassembly. All axes have been properly secured by specialists. The machine can be transported on a standard commercial truck. Accessories: - 4x dosing containers - 1x build cylinder - 1x overflow container - Various spare parts such as protective glass, etc. - Manuals The Armanni CAR.Elev. pallet truck for container replacement is also in stock and can optionally be included in the offer. Rapid production of high-quality 3D components D1. Machine Concept The TruPrint 3000 is a universal medium-format machine with external part and powder management for the industrial production of complex metallic components using 3D printing. Its large build volume offers high flexibility regarding the size, quantity, and geometry of the respective application. Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials5: Weldable metals in powder form, such as stainless steels, tool steels, aluminium, nickel-base, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate6 cm³/h: 5 – 60 Layer thickness7 μm: 20 – 150 Laser source (TRUMPF fiber laser) W: 500 Beam diameter μm: 100 – 500 O₂ concentration ppm: 100 Exposure speed (powder bed) m/s: 3 Monitoring: Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C: 200 Shielding gas: Nitrogen, argon Power supply V / A / Hz: 400 – 32 – 50/60 Dimensions (incl. filter) mm: 3385 x 1435 x 2225 Weight (incl. filter) kg: 4300 Subject to change. The details provided in our quotation and order confirmation are decisive. Technical Data TruPrint 3000 Table 3

Kondisi: baru, Tahun pembuatan: 2026, Pclass = Working area X 1250mm x Y 1250mm x Z 100mm Custom solutions for laser processing available! (* Pricing depends on configuration and laser power; this is a brand-new laser machine manufactured by us) Cedpfscwph Tjx Adcsrd skyCUBE M, P, SL – Laser processing center – the new M, P, or SL SLclass = Working area X 1250mm x Y 2550mm x Z 100mm class, more productive with a larger work area, ideal as a laser cutting machine for your metalworking needs Laser processing made simple and highly precise – laser engraving and cutting at high speed and with outstanding quality

Kondisi: baru, Tahun pembuatan: 2026, nomor mesin/kendaraan: 2103 XXXXXX, The FPS 300M – Successor to the DECKEL FP1. Thanks to our many years of service experience, we have decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production environments. Control 3-axis – FPS Aktiv – Digital display Spindle Speed 40 – 2,000 rpm, geometrically graduated direct-drive transmission with 16 speed settings for maximum torque and milling performance Feed Rate 5 to 500 mm/min, steplessly adjustable Rapid Traverse 1.5 m/min Quill Extendable vertical quill, 60 mm, SK40 with M16 drawbar thread optional: with DECKEL saw thread S20 x 2 Travel (Axes) X/Y/Z: 300/160/340 mm Table Fixed angle table, 600 x 210 mm Standard Features • Vertical and horizontal spindle Cjdpfx Adsh I Nqwjcjrd • Milling head can be manually swivelled +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Tailstock • etc. For further technical data, please refer to the attached data sheet.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, 🔶 P SYSTEM P300 – PELLET PRESS 30 kW USED – FACTORY REFURBISHED Industrial pellet press P System P300 – 30 kW, complete with control panel, refiner, and dedicated hydraulic power unit. Pre-owned machine refurbished by the manufacturer, ready for new installation and/or integration into a complete pellet production line. A compact, robust, and reliable solution for producing pellets from sawdust and fine biomass materials. 📊 Main Technical Specifications Main motor: 30 kW Output: up to 350 kg/h* Suitable materials: sawdust and fine wood chips Required moisture content: 13–14% Typical power consumption: approx. 25 kWh at 250 kg/h of pellets approx. 30 kWh at 300 kg/h of pellets *Throughput and power consumption may vary depending on material type, particle size, and moisture content. ⚙️ Included Configuration ✔ Control panel ✔ Refiner ✔ Dedicated hydraulic power unit ✔ Industrial P System frame 🔧 Optional Integrations Pellet discharge screw conveyor Feeder mini silo or container for raw material collection Magnetic separator Additional refiner Dust recirculation filter Pellet collection hopper Manual or automatic bagging system 📍 Immediate availability (subject to prior sale) 📦 Condition: used – factory refurbished 🚛 Terms: ex works (EXW Cremona, Italy) 💰 PRICE Credpfx Adjyk Etvecod € 39,250.00 + VAT (ex works – EXW Cremona, Italy)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, HYDRAULIC PRESS BRAKE COLMAL 3000x250 TON, 4 AXES, 300 mm THROAT DEPTH. DIMENSIONS: 380x350x180 (H) cm, WEIGHT: 14,100 KG Csdpjwyng Sefx Adcsrd

Tahun pembuatan: 2024, Kondisi: baru,

Kondisi: bekas, Tahun pembuatan: 2021, - Merek: Nilfisk - Tipe: SC6500 1300C - Tahun pembuatan: 2021 - Jam kerja: 383 - Berat: 1547 kg. Credpfx Aexrv Edodced - Penggerak: Baterai - 36 volt - Pengisi daya baterai 220 volt - Menyapu + Menggosok + Menyedot - Lebar kerja: 130 cm. - 2x Sikat samping - Sikat penggosok - Tangki penampung kotoran - Tukar tambah dan transportasi memungkinkan - Video tersedia di website kami

Kondisi: bekas, en-GB|MULTI-HEAD TUBE CUTTING MACHINE TRA3000/7/7/CAR + RA1 Manufactured by MAIR SCOPE OF SUPPLY 1 Loading table with: - Motorised sling loader, for full bundle loading - Side chain conveyor, for feeding tubes one by one - Upper support with vertical adjustment (to avoid double tube loading when working with small diameters) - Length stop and tube loader 2 TRA3000 Cutting Machine with: - 7 independent cutting heads - All cutting heads can be raised independently - Linear guide with scale for cutting head positioning - Centralised tube transport system with adjustable production cycle 3 Individual RA1 tube collector cradle, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adjust cradle length to tube length - Motorised endless slings for collecting flexible tubes 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine, including light curtains and emergency line. Note: The owner has installed safety barriers so the machine complies with “safety conformity” standards. TECHNICAL SPECIFICATIONS Manufacturer: MAIR RESEARCH Model: TRA 3000/7/7/CAR + RA1 Annual maintenance: performed by MAIR Spain Maximum tube input length: 7000 mm Bundle loader: 3 tonnes Maximum load capacity: 3000 kg Round tubes (Ø outside): 12-60 mm Credpeymax Esfx Adcod Square tubes (height x width): 12x12 – 50x50 mm (see note) Rectangular tubes (Height x Width): 12x16 – 60x40 mm (see note) Min.-max. wall thickness: 0.8 – 4.0 mm (depending on yield strength) Cutting lengths: 330-6900 mm Maximum straightness tolerance: 1 mm/m Number of cutting heads: 7 Motor power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380/50 V/Hz, 3-phase Compressed air: Must be supplied filtered and lubricated at 6 bar. Total installed power: Approx. 21kW – 50Amp

Kondisi: bekas, MULTI-HEAD TUBE CUTTER TRA3000/7/8, manufactured by MAIR Scope of supply: 1. Loading Table with: - Motorized sling loader for loading a complete bundle Cedpfx Adsymaw Uscord - Side chain conveyor for feeding the tubes one by one - Upper arm with vertical adjustment (to prevent loading two tubes at once when working with small diameters) - Longitudinal stop and tube loader 2. TRA3000 Cutter: - 7 independent cutting heads - All heads can be raised individually - Linear guide with ruler for positioning the cutting heads - Centralized tube transport system with adjustable production cycle 3. Double collecting cradle RA3, with: - Independent cradles for collecting the cut tubes - Side separators in the cradles to adapt length to the tube - Motorized endless slings for gentle tube collection Note: With the double cradle system, it is possible to carry out bundling and strapping on cradle 1 while production continues on the machine without stopping. 4. Main electrical cabinet and control panel. NOTE: - This machine has worked very few hours. - Mechanical condition is very good. - Only requires cleaning and repainting to look "as new" Max. Infeed tube length: 8000 mm Bundle loader: 3 T Max. load capacity: 3000 kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Min.-Max. thickness: 0.8 - 3.0 mm (depending on yield strength) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motor power: 2.2 kW Cutting disk diameter: 300 mm

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, daya: 75 kW (101,97 hp), Stein- und Erzbrecher (Backenbrecher) für den Einsatz in Steinbrüchen und im Bergbau Csdpoq H Shcjfx Adcord Modell: PE600X900 Maximale Aufgabengröße: 500 mm Leistung: 80-135 t/h Motor: 75 kW Gewicht: 15 t Neben diesem Modell bieten wir auch weitere Modelle wie PE900X1200, PE500X750, PE250X400, PE400X600 usw. an. Zusätzlich führen wir auch Prallbrecher, Kegelbrecher, Hammerbrecher, VSI-Brecher und können komplette Anlagen zur Aufbereitung und Absiebung von Gestein mit einer Kapazität von 30–1000 t/h liefern. Kontaktieren Sie uns gerne für weitere Informationen, falls Sie ein anderes Modell oder eine andere Brecherart benötigen. Sie können uns auch eine Nachricht hinterlassen, wenn Sie ein anderes Modell oder einen anderen Brechertyp wünschen.

Kondisi: sangat baik (bekas), NOMOR KATALOG: 6985 DATA TEKNIS - lebar maksimum benda kerja: 300 mm - tinggi maksimum benda kerja: 200 mm - agregat: rol karet beralur + sepatu + rol logam - meja kerja: 1230x440 mm - sabuk: 300x1900 mm Dari atas: - rol karet anti-selip - agregat sekitar 7,5 kW - rol karet anti-selip Dari bawah: - sabuk penarik - osilasi pneumatis - 2 kecepatan maju Credpfx Adszh H I Ijced - motor feeding 0,85 kW - diameter nozzle ekstraksi: 110 mm - dimensi (P/L/T): 1250/1000/1950 mm - berat: 530 kg – belum dicat ulang – mesin amplas bekas – kondisi sangat baik Harga netto: 13.900 PLN Harga netto: 3.300 EUR Harga netto dihitung berdasarkan kurs 4,2 PLN/EUR (jika terjadi fluktuasi kurs yang signifikan, harga dapat berubah)

Kondisi: baru, Tahun pembuatan: 2022, Cantilever racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW immediately available from stock. - Load capacity: 500 kg per arm - Load capacity: 2250 kg per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels in total) Racking system consists of: - 04 x uprights, including base, approx. 300 cm from IPE160 - 12 x cantilever arms, approx. 120 cm from IPE 80 - Including all necessary connecting elements and bolts. Why choose BLT cantilever racking? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities of uprights and cantilever arms are statically verifiable at 100% load. - All racking systems are supplied in hot-dip galvanized finish. Suitable for both indoor and outdoor use; unlike painted systems, they do not rust. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1. - Long-term repurchase guarantee. - Upright base and upright back are welded together for additional safety and reduced installation times, as feet do not need to be bolted to the upright back. - Bracing made from angle steel, eliminating the need for turnbuckle tensioning. This reduces assembly time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,265.00 net + legally applicable VAT. Codszi Txvopfx Adcjrd You will receive an invoice with VAT shown separately. Transport: Delivery available on request by our partner carrier; costs depend on postcode. Assembly: Our trained staff are available to professionally assemble or dismantle your facility upon request. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning to ordering and assembly.

Kondisi: baru, Dijual carrier profesional untuk SCBA Dräger PSS 7000 • Model: PSS 7000 • Manometer: hingga 300 bar • Part No: 3355850 • Type No: 3355068 Crodpoy Ilvgjfx Adced • Kondisi teknis baik • Lengkap dengan tali dan pengait • Rangka kokoh tanpa retak Dijual persis seperti di foto. Tanpa tabung dan masker. Peralatan standar pemadam kebakaran – seri tertinggi Dräger.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 110 kW (149,56 hp), jenis bahan bakar: listrik, warna: lain, berat keseluruhan: 21.360 kg, Tahun pembuatan: 2026, Die Backenbrecher zerkleinern je nach Kapazität im Allgemeinen 200 bis 300 Tonnen pro Stunde. Auf Wunsch des Kunden können Backenbrecher mit höherer Kapazität produziert werden. Die Backenbrecher werden hauptsächlich zur Zerkleinerung der härtesten Gesteine wie Basalt, Granit und Gabbro eingesetzt. Dank ihrer robusten und langlebigen Backenkonstruktion zählen sie seit vielen Jahren zu den bevorzugtesten Brechern in der Bergbauindustrie. Durch die Backeneinstellung lassen sich gewünschtes Endprodukt und gewünschte Kapazitäten exakt erzielen. Die Einstellung erfolgt bequem über hydraulische Kolben. ALLGEMEINE MERKMALE: - Riemen-/Riemenscheibenantrieb - Backenplatten aus hochwertigem, speziell angefertigtem hochmanganhaltigem Gussstahl mit hoher Verschleißfestigkeit - Exzenterwelle aus Cr-, Ni-, Mo-legiertem, geschmiedetem Stahl Crsdpfxezha Hqe Adcod - Hydraulisch einstellbarer Backenspalt - Einsatz von Sicherheits-Kniemblechen (Toggle Plates) bei Überlast - Alle abriebgefährdeten Flächen mit Verschleißschutzplatten ausgekleidet TECHNISCHE DATEN: • Modell: FABO CLK 1175 • Typ: Primär-Backenbrecher • Einlauföffnung: 1070 x 760 mm • Backenöffnung: 45–160 mm • Max. Aufgabegröße: 760 mm • Kapazität: 200 bis 300 Tonnen pro Stunde • Motor: Schwerlast-GAMAK, 110 kW • Lager: Schwerlast SKF-FAG • Gewicht: 21.360 kg • Abmessungen: 2.730 x 1.698 x 2.492 mm • Inklusive Motor und Schutzabdeckungen *Alle unsere Produkte werden sorgfältig gefertigt und sind mit 1 Jahr Garantie abgedeckt! *Installation und Bedienerschulung kostenlos FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE UNS BITTE!

Kondisi: sangat baik (bekas), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Minimum workpiece length: 270 mm - Maximum workpiece length: unlimited - Maximum feed speed: 90 m/min - Feed speed steplessly adjustable via frequency inverter from the control panel - Cutting speed: 24 m/min - Milling motor power: 2 x 4 kW - Milling spindle speed: 7,500 rpm - Feed drive motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Powered infeed roller conveyor, length: 1,130 mm Crodpfx Adsza Emuocod - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction port diameter: 150 mm - Dimensions (LxWxH): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – Made in Germany – DTR technical documentation included – Tongue and groove profiling machine – Complete set of milling cutters and cutter heads included – Powered infeed roller conveyor – Not repainted – Used machine in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (based on 4.2 EUR rate) (Prices may change subject to exchange rate fluctuations)

Kondisi: baik (bekas), Tahun pembuatan: 2024, Welding positioner KT 300 Cjdpfx Aobvk I Esdcjrd Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilt range: stepless adjustment via geared motor from 0 to 90° Speed: 0.3 – 2.5 rpm Incl. foot remote control Additional cost: Quick-change chuck Diameter 300 mm, €450

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, kendali jauh kaki, Protec KT 300 H Welding Turntable, 170/400 Special Version Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-release chuck diameter 300 mm, surcharge: €550 Quick-release chuck diameter 400 mm, surcharge: €750 Crank gear motor, stepless adjustment 0 – 90° Stepless speed control: 0.01 to approx. 5 rpm Including foot remote control Codpsvbrqxofx Adcord Digital display with welding time limitation (optional)

Kondisi: baru, Tahun pembuatan: 2024, kapasitas angkut: 300 kg, Welding positioner Protec KT 300 H, 170/400 special version Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Cjdpfx Aerypmvodcord Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck, diameter 300 mm, surcharge: €550 Quick-action chuck, diameter 400 mm, surcharge: €750 Crank gear motor, stepless tilt adjustment 0 - 90° Stepless speed adjustment: 0.01 to approx. 5 rpm Incl. foot remote control Digital display with welding time limitation (optional)

Kondisi: baik (bekas), The scope of delivery includes: Cjdoi Enw Sepfx Adcord 01x Shelf connector, used Manufacturer: Dexion Type: P90 for rack spacing: approx. 300 mm total length: approx. 380 mm cross-section: U 51 x 25 mm material finish: Sendzimir galvanized weight: 0.47 kg | each.