Beli Meuser M1L 46551 bekas (1.347)

Tahun pembuatan: 2013, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 821301-10002, Equipment / further information: Hardware • OptiPrint™ media cleaner • Powered roll feed system with media flanges • Powered take-up system with media flanges • Baskets • Rear and front media sensors • Hard disk drive (2 GB job storage) Interface • Control panel with 8 buttons • 4x20 character LCD display • English display language Hedpohu Sawjfx Al Isl • Metric or imperial units Functionality • 16 user configurations • Automatic alignment system • Up to eight colors per job • OptiTrac Ribbon Storage • Right side of the ribbon • OptiTrac colors: Mirror Silver and Gold Cutting: • Chaining and curve smoothing for improved cutting quality • OptiCut drag movement optimization • Overcut for easy weeding • Repeat print function (up to 999 repetitions) • Flash EPROMs Supplied with 5 cassettes and various color ribbons User manual

Kondisi: sangat baik (bekas), Voltage: 220-240VAC // Current: 1.8A // Frequency: 50/60 Hz // Phases: 1 // Power: 0.4 kW Hsdpjh Eibasfx Al Isl WITH CONVEYOR BELT Diverting Belts: For envelope format 10.5cm x 14.8cm and in portrait orientation, the diverting belts should be adjusted toward the central transport belt. Rule: For large envelopes, move the diverting belts outward; for small envelopes, push the diverting belts (22) inward. CONNECTION TO THE PRINTING MACHINE The STENZ-FEEDER requires no synchronization. Guide the feeder by the handles into the printing machine and set the required height using the hand crank. Important: Only after setting the print height, secure the rear rollers and check for stability. Switch on the machine and start printing. For single-sheet feeder printing presses (GTO), adjustable tilt is available. Trouble-free envelope printing can begin. Developed for heavy-duty use at maximum print speeds. Compatible with all 36 x 52 printing presses, regardless of feeding system (stream/overlapping or single-sheet feed). – No mechanical modifications to the press are necessary. – No synchronization settings required due to laser technology. – The ultra-short setup time enables cost-effective operation from as few as 1,000 envelopes. – User-friendly handling. – The design of the feeder enforces overlap, so the throughput of the Stenz Feeder is not restricted. – Minimal wear parts for an extremely long service life. – Already certified for use on thousands of different printing presses. – A Swiss quality product – Designed by printers for printers. Specifications: Speed: Limited by the printing machine Length: 115 cm Width: 50 cm Height: adjustable Max. format size: 36.5 x 35 cm Max. feed width: 36.5 cm Electrical: 230 V, 50 Hz

Kondisi: bekas, Tahun pembuatan: 2011, en-HORIZON HT-30, three-knife trimmer, used The Horizon HT-30 is an extremely robust three-knife trimmer known for its outstanding reliability, earning it a spot among the most popular machines in print finishing—a guarantee of quality that is often sold quickly due to high demand. Key features: - Application: Standalone (offline) - User-friendliness: Simple adjustment via touchscreen control - The Horizon HT-30 trims books fully automatically, meaning the operator does not need to be permanently present. After loading the books, the HT-30 signals when trimming is complete for unloading and refilling - Memory function: 40 job memory slots for repeat orders - Operation: Stacking and trimming up to 10 copies simultaneously, fully automatic - Cutting process: The knife moves in two directions—cuts without causing damage - Conveyor belt: Transports the trimmed books to a delivery tray - Durable construction: The HT-30 is built robustly and designed for long service life Specifications: - Untrimmed book size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed book size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm Hodoy D Hwdepfx Al Isl - Trim range: Max: 99 mm; Min: 2 mm - Pre-stack depth: 300 mm - Speed: Up to 520 books per hour - Pressure: Max 8 kN - Noise level: Max 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-inclusive package We take care of everything: from secure packaging and transport to customs clearance. On request, we can also provide you with a tailored leasing offer. Sustainable and economical Opt for a used machine and benefit twice: protect the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Kondisi: bekas, Tahun pembuatan: 2007, The Horizon StitchLiner 5500 was manufactured in 2007 by Horizon and is a system with a format of 350 x 500 mm, currently in production in Germany. This machine includes two collating towers, VAC-100a and VAC-100m, an ST-40 stacker, an ACF-30 accumulator and folder, an SPF-30 saddle stitcher, an HTS-30 three-knife trimmer, and a TB-30 conveyor belt. Key features include 20 stations, a U-shaped layout for efficient use of space and easy monitoring, fully inline production from collation to the finished product, and variable data processing for personalized printing. It offers fully automatic format adjustment for rapid job changeovers and a touchscreen interface for user-friendly operation, even for less experienced operators. Specifications include handling sheet sizes from a maximum of 500 x 350 mm to a minimum of 148 x 120 mm, with a paper weight range from 40 to 350 gsm. It processes from 8 to 200 pages (up to a maximum spine thickness of 5 mm) and achieves a production speed of up to 5,500 booklets per hour. Technical details cover a trim size (untrimmed) from a maximum of 350 x 250 mm to a minimum of 140 x 103 mm, and a trim size (trimmed) from a maximum of 312 x 230 mm to a minimum of 120 x 95 mm. The machine requires a power supply of 400V/50Hz. Delivery terms are FCA. Format: 350 x 500 mm Equipment: This StitchLiner 5500 includes the following components: - 2x VAC-100a and VAC-100m collating towers - ST-40 stacker - ACF-30 accumulator and folder - SPF-30 saddle stitcher - HTS-30 three-knife trimmer - TB-30 conveyor belt Key Features: - 20 stations - U-shaped layout: space-efficient and easy to monitor - Inline production: from collation to finished product - Variable data processing: personalized printing - Fully automatic format adjustment for fast job changeovers - Touchscreen operation for user-friendly interface, even for less-experienced operators Specifications: - Sheet sizes: max. 500 x 350 mm, min. 148 x 120 mm - Paper weight: 40–350 gsm - Processing capacity: 8–200 pages (max. spine thickness 5 mm) - Production speed: up to 5,500 booklets/h Technical Details: - Trim size (untrimmed): max. 350 x 250 mm, min. 140 x 103 mm Hedevfx Ncepfx Al Ijl - Trim size (trimmed): max. 312 x 230 mm, min. 120 x 95 mm - Power supply: 400V / 50Hz - Floor space required: min. 5

Kondisi: bekas, Tahun pembuatan: 2005, The SCREEN PTR 4100, year of manufacture 2005, is a reliable computer-to-plate system designed for high-quality plate imaging. With a maximum plate size of 830 x 660 mm, it delivers consistent and precise results for professional offset printing environments. The unit is equipped with a Heidelberg autoloader for efficient plate handling, a Xitron RIP with dongle for precise workflow and imaging control, as well as a stacker for optimized plate management. The SCREEN PTR 4100, currently in operation in Germany, combines robust engineering with automation features, making it a dependable solution for print shops that value accuracy, productivity, and user-friendliness in plate production. Format: 830 x 660 mm Maximum Plate Size: Min 324 x 370 mm Speed: approx. 10 plates/hour Features: - 4-up thermal platesetter – 16-channel infrared laser diodes - Resolution: 2400 dpi - Autoloader - Includes Xitron RIP with dongle - Punching device - Blower unit Hjdpfx Ajw U Dt Ajl Ijl - Counter: ONLY 106,584 plates – Exposure time: 7,846 hours The diodes are in very good condition, as confirmed by the provided images.

Kondisi: bekas, Tahun pembuatan: 2001, The Mathias Baeuerle CAS 52-B is an advanced and efficient folding machine designed for precise and automated folding tasks. Manufactured in 2001, the machine is currently in stock in Germany. It features four folding plates in the first unit and an automatic folding plate adjustment for precise and uniform folds. The CAS 52-B is equipped with automatic paper thickness measurement, a control panel with seven pre-programmed standard folds, and an electronic double-sheet detection system for error prevention. It also includes a flat pile feeder for smooth material handling and a computer-controlled MB CAS 52 Multimaster folding unit for precise and repeatable folding processes. Thanks to its memory for 60 recurring jobs, the machine can efficiently handle large order volumes. The CAS 52-B additionally offers a semi-automatic folding roller adjustment and a mobile delivery unit for enhanced versatility and user convenience. It can process materials up to a size of 520 x 850 mm. Format: 520 x 850 mm Equipment: - 4 plates, first unit - Automatic folding plate adjustment - Automatic paper thickness measurement Hodpfjwdww Uox Al Isl - Control panel with 7 pre-programmed standard folds - Electronic double-sheet detection - Flat pile feeder - MB CAS 52 Multimaster computer-controlled folder - Memory for 60 recurring jobs - Mobile delivery unit - Semi-automatic folding roller adjustment

Kondisi: bekas, Tahun pembuatan: 2007, The Perfecta 168 HTVC + Basa 7 is a robust and efficient machine designed for high-performance cutting and finishing tasks. Manufactured by Perfecta in 2007, this model is renowned for its durability and precision. The machine supports a format size of 1680 mm, making it ideal for a wide range of applications. It is currently installed and set up in Germany, providing easy accessibility for users in the region. The Perfecta 168 HTVC + Basa 7 features a touchscreen interface for simple and intuitive programming, enhancing user control and operational efficiency. Equipped with a monitor screen, it offers clear visual feedback and process monitoring. The machine is fitted with a stainless steel air table, ensuring smooth material handling and precise cutting. Both the left and right side tables are also equipped with air function and made of stainless steel, further improving material flow and accuracy. Safety cells surround the machine, ensuring operator safety during operation. The stack lift type is a pallet feeder, allowing for efficient loading and unloading of materials. The jogger type is BASA 7, providing effective alignment and stacking of materials. The Perfecta 168 HTVC + Basa 7 is a reliable choice for industries requiring precise cutting and finishing. Its advanced features and robust construction make it a valuable addition to any professional setting. Format: 1680 mm Equipment: - Type: Perfecta 168 HTVC - Touchscreen programming - Monitor screen - Air table (stainless steel) - Air table Hjdpfxovghkls Al Iol - Side tables with air (stainless steel): left & right - Safety cells - Stack lift type: pallet feeder - Jogger type: BASA 7

Kondisi: bekas, Tahun pembuatan: 2018, 1 piece CNC-controlled drilling, gluing, and dowel insertion machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3-phase, 50Hz, complete in standard configuration with: - Support with linear guide comprising: * 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) * 1 pc. blow-out, gluing, and reinforced dowel insertion station for Ø 8 mm dowels, dowel length 30 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, working length 1300 mm, max. traversing speed 78 m/min - Z-axis, position programmable via support table 5-40 mm; with option for NC-controlled Z-axis - Programmable dowel projection 7-20 mm; with option for NC-controlled Y-axis * Drilling depth 0-35 mm (with drill length 70 mm) automatically set to dowel projection - Closed gluing system: 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for flushing glue system; each with 1 stainless steel container for 5 kg glue, and 5 l water - Control lamp for glue level indication in glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual processing of 1-4 workpieces - 4 pcs. pneumatic tilting vertical clamps 10° for workpiece thickness up to max. 80 mm; workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control system with: * Built-in industrial PC, incl. Beckhoff TWINCAT Soft PLC * Operating temperature 0-50°C * 15" resistive TFT industrial touchscreen display, resolution 1024 x 768 * CPU 2 GHz, 256 MB RAM * 2x network adapters, IDE hard disk, 4x rear USB, 1x front USB * Operating system: WINDOWS 7 - Programming via user-friendly software menu, freely programmable drilling positions by ABSOLUTE, RELATIVE, or GRID coordinates, automatic workpiece mirroring and process optimization, 4 operator fields for different programs, graphical workpiece representation, parametric programming, zero-point shifting, programmable work lists, plain-text error diagnostics OPTIONS: - 1 Electronic glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional 10° vertical tilting clamps with holder (total 8 clamps) Hsdpjxwaz Hjfx Al Isl - Surcharge for machine bed length 1800 mm (working length 1800 mm) - Surcharge for: * 1 horizontal drilling unit, 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm (standard working length remains unchanged) - Y-axis NC controlled, with ball screw drive and dynamic speed 300 mm/sec; software programmable for dowel projection 7-30 mm and drilling depth 0-42 mm (with drill length 77 mm) for vertical drilling unit (top drilling), Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis, position 5-62 mm instead of 5-42 mm - Surcharge for: * 1 vertical drilling unit (top drilling), 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm; Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length remains unchanged) - 1 NC-controlled Z-axis, with K

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, daya: 1,7 kW (2,31 hp), panjang benda kerja (maks.): 99.999 mm, lebar benda kerja (maks.): 1.250 mm, tinggi benda kerja (maks.): 50 mm, berat benda kerja (maks.): 40 kg, jumlah sumbu: 4, jenis aktuasi: listrik, tinggi total: 2.140 mm, panjang total: 3.080 mm, lebar total: 1.610 mm, berat keseluruhan: 1.515 kg, kecepatan pemakanan sumbu X: 25 m/menit, kecepatan spindle milling (maks.): 3.600 rpm, kecepatan mata gergaji: 7.000 rpm, Perlengkapan: Penandaan CE, Technical Data - Number of independent vertical spindles: 12 - Number of independent horizontal spindles on the X-axis: (2+2) - Number of horizontal drilling spindles on the Y-axis: (2+2) - 1 saw blade (Ø 100 mm) - Electrospindle 5 kW with ISO30 taper (12,000-24,000 rpm) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited / Y 1,250 mm / Z 50 mm - Min. workpiece dimensions: X 270 mm / Y 150 mm (70 op) / Z 3 mm - Feed speed: 25 m/min - Spindle speed: 3,600 rpm - Saw speed: 7,000 rpm - Max. horizontal tool Ø: 12 mm - Max. horizontal drilling depth on the X and Y axes: 35 mm - Max. vertical drilling depth: 43 mm - Max. vertical tool Ø: 35 mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant The DDT Feed System: Double Dynamic Transport Two clamps ensure uninterrupted workpiece transport. The operator inserts the workpiece up to the stop. Both clamps grip the workpiece and precisely position it. During processing, the clamps communicate with each other so that clamp #2 holds the workpiece before clamp #1 releases it. This maintains a constant feed rate even during linear milling. - Laser measurement system to detect the start and end of the workpiece. - The measured values can be transferred to and used for program adjustments. - Side stops with rollers, consisting of a fixed and a movable part, equipped with mechanical digital display for automatic alignment to the zero-stop; allows for material removal from 1 mm up to 3 mm along the zero line. - Constant lateral pressure device for precise positioning at the zero line. - Automatic 4-position tool changer - Adjustable zero point - No limit to workpiece length Peripheral Equipment and Additional Features - LCD-TFT monitor - Industrial PC - WSC user interface with list, parametric tool, and parameterizable setup - USB port Hodpfx Aey Id Riol Isl - Storage of all files - Macro programming - DXF file import possible

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, gaya penjepit: 6.500 kN, diameter sekrup: 60 mm, berat keseluruhan: 6.500 kg, produsen pengendali: ENGEL, This electric injection moulding machine Engel duo 2400/650 was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection volume of 890 cm³. The clamping force reaches up to 6500 kN, with a maximum mould weight of 11,000 kg. Take advantage of this opportunity to purchase the Engel duo 2400/650 electric injection moulding machine. Contact us for further information on this machine. Additional Equipment • Oil tank capacity – injection unit: 500 l • Maximum cooling capacity (at 32°C water inlet): 29.40 kWcool • Water consumption (32°C): 4.80 m³/h Machine Advantages Quality Features • The machine is equipped with electric water manifolds (4 E-Flomos, each with 8 circuits). • The injection units are fitted with accumulators, enabling a high injection pressure of up to 2400 bar with a 60 mm screw. Technical Features • Maximum injection capacity: 890 cm³ • Screw torque: 2000 Nm // maximum screw speed at reduced torque: 275 min⁻¹ • Reduced torque at maximum screw speed: 1600 Nm • Recovery rate (3-zone screw): 51 g/s // Recovery rate (barrier screw): 67.1 g/s • Injection rate: 353 cm³/s • Nozzle stroke: 950 mm • L/D ratio: 24.0 • Heating zones including nozzle: 8 // Heating capacity: 27.5 kWel • Opening force with cushion: 510 kN • Maximum platen distance: 1750 mm Additional Information Dimensions & Weight • Width of ejection chute: 1100 mm • Weight of clamping unit: 20,000 kg • Maximum mould weight (movable platen): 7,330 kg • Maximum mould weight (fixed platen): 7,330 kg • Maximum total mould weight: 11,000 kg Cycle Data (Euromap 6) • Stroke: 700 mm • Dry cycle time: 2.9 s Control System: Monocompute CC300 Key Features • 21.5" Full HD touchscreen • USB interface / Ethernet port • E-move control element • 3 key cards for user login • Graphic icons for cycle control • Display languages: German, English • Acoustic error signal / signal light for fault indication Programs & Monitoring • Power Control: optimises motor performance during metering • Mould parallelism measurement • IQ Weight Monitor: monitors shot weight and viscosity • IQ Weight Control: automatic adjustment of injection parameters in case of fluctuations • Quality monitoring interface (injection time, dosing time, pressure, cycle time) • Continuous ejection possible when monitoring is deactivated Clamping Unit & Platens • Reinforced platens (FAP & BAP each +50 mm) • Reduced min./max. mould height and platen spacing (-100 mm due to reinforcement) • FAP: smallest possible platen opening, spherical cap minimised • BAP: without ejector opening • Additional threads as per EUROMAP VOL1 • Centring grooves as per drawing • Platen ejector – Variant A (customised to clamping pattern) • Safety interface for ejector Hodpfx Aoy D Npcol Ijl Hydraulics & Core Pulls • Hydraulic core pull: • 1-fold on moveable platen • 2-fold on fixed platen • 2-fold on moveable platen with PQ proportional valve, volume measurement, pressure/speed adjustment • Interface for core pull intermediate position Mould Heating & Cooling • Mould heating: 16 circuits, max. 40 kW heating capacity (Euromap 14)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 430 mm, kinerja area: 900 m²/jam, berat keseluruhan: 27 kg, masa garansi: 12 bulan, kapasitas tangki air: 5 l, Technical Data: CONDITION – NEW! Year of manufacture: 2026 Manufacturer: Hako Model: Scrubmaster B5 Type: Compact scrubber-dryer Country of manufacture: Germany Charger: included Power supply: Battery Battery type: Sonnenschein 24V 12.8Ah Water tank type: AntiBac Number of included brushes (pcs): 1 Brush width (mm): 430 Suction width (mm): 560 Water tank: Fresh / Dirty (l): 5 / 5 Theoretical coverage (m²/h): 900 Weight, ready for operation (kg): 27 Scope of delivery and features: AntiBac water tank 430mm medium-hard brush 560mm squeegee Oil-resistant suction lips Hedey Himtepfx Al Iol 24V 12.8Ah lithium-ion battery Charger Advantages: The AntiBac tank used in Hako machines is made from a material with antibacterial properties. This reduces the growth of bacteria and fungi inside, improves the machine’s hygiene, and minimizes unpleasant odors. This solution is particularly beneficial in areas with high hygiene requirements, such as hospitals and food processing facilities, and also helps to keep the tank in better condition for longer. The agile, quiet, and user-friendly B5 scrubber-dryer is equipped with a 430mm disc brush. It is ideally suited for cleaning small and medium-sized areas where maneuverability is crucial. The intuitive control panel allows for easy operation and rapid learning of fundamental functions. The scrubber-dryer features a curved squeegee that efficiently removes water, leaving surfaces perfectly clean and dry. The machine is made of high-quality, impact- and chemical-resistant materials. Like all HAKO products, the B5 has proven itself in industrial use, and the availability of spare parts and service ensures a long service life.

Kondisi: baik (bekas), berat keseluruhan: 160 kg, The BookMaster brochure machine and the TrimMaster trimmer combine maximum performance with cost efficiency. They are easy to operate and require minimal maintenance, making them by far the most advanced, user-friendly, and reliable saddle-stitch brochure machines on the market. The BookMaster features a unique stapling mechanism, ensuring nearly maintenance-free operation. The main wear parts are contained within the staple cartridge and are replaced every 5,000 cycles during cartridge change. This allows for over one million cycles before any maintenance of the staple head is required. The BookMaster is equipped with manual adjustment for page margins, end offset, and staple/fold position. The TrimMaster trimmer features a single self-sharpening blade made of hardened steel for precise trimming of the book’s fore-edge. All trim waste is transported outside the machine to an external waste container, enabling continuous operation. Finished brochures are conveyed onto a high-performance delivery belt. Additional information: - Max sheet size: 482 x 320 mm Hjdpfxsy Idr He Al Isl - Min sheet size: 210 x 140 mm - Max brochure thickness: 22 sheets - Max trimming length: 25 mm - 230 volts Shipping possible, collection possible, test run possible. Operating manual is included.

Kondisi: baru, Tahun pembuatan: 2026, THE COST-EFFECTIVE TUBE BENDING MACHINE FOR TIGHT BEND RADII: This bending machine, equipped with a free-standing bending head, can be easily converted for right- or left-handed bending, making it ideal for handling complex geometries. The plug-in bending tools allow for quick changeovers to accommodate different tube diameters. A high-speed hydraulic system reduces non-productive times—an essential factor for series production. Clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and the latest X2X interface can store an almost unlimited number of programs for bend angles, lengths, and rotation angles for up to 50 bends per tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine features two operating modes: In "Simple Bending," the length and rotation of the bends relative to each other are displayed automatically. In "Controlled Bending" mode, the bending data is preset, and a continuous target/actual comparison is performed during bending. This minimizes user-dependent error rates by eliminating mispositioning within a tolerance window. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically retracted early upon achieving the desired bend angle. The compact drive unit with detachable mandrel support offers advantages on site, especially for custom constructions with very large tube feed lengths. It is also available in a stationary version with an integrated storage system for tools and mandrel rods. An economical alternative to fully automated CNC machines. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • System engineering, e.g. chemical industry • Metal construction • Prototyping Technical data: • Bending capacity Ø 6 to 50 x 4 mm, depending on material • Minimum/maximum bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control with bend angle setting (0.1°) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions available in longer lengths) • Maximum bending angle: 180º • Weight: 800-900 kg (depending on version) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) • Pneumatic or hydraulic quick-change chuck Hedeng Exajpfx Al Isl • Automated or manual (via foot switch) positioning of length and rotation with brake function • Automatic length and rotation positioning via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for checking clamping force • 10" touchscreen with integrated tube calculation • Bending radius up to 250 mm • Data transmission via cable (LAN), wireless (WLAN), or USB OUR ON-SITE SERVICE: • Welcome to test production in our in-house demo room • Consulting and information session at your location • Consulting and transaction possible as leasing/financed purchase through JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, THE COST-EFFECTIVE BENDING MACHINE FOR TIGHT BEND RADII: The bending machine with a free-standing bending head can be easily converted for complex geometries to right and left bending. The plug-in bending tools allow for quick changeover to different tube sizes. Fast hydraulics shorten auxiliary times, which is a crucial factor for serial production. The clamping pressure for tube holding can be optimally adjusted. The PLC control system (expandable via USB stick) with data storage and latest X2X interface can store an almost unlimited number of programs for bending angles, length measurements, and rotation angles for up to 50 bending sequences per tube length. For monitoring springback values, a freely programmable database for up to 200 materials is available. Hodpfx Alondn Age Iol The machine features two operating modes: In 'simple bending' mode, the length and rotation of the bends relative to each other are displayed automatically. In 'controlled bending' mode, the data is preset, and during bending, a continuous actual/target comparison is performed. This eliminates mispositioning within a tolerance window, minimizing user-related error rates. General error messages are displayed in full text on the large screen. The mandrel retraction is programmable and can be automatically withdrawn early upon reaching the bending angle. The compact drive unit with detachable mandrel carrier offers advantages for on-site assembly as well as for special designs with very large tube feed, and is also available as a stationary version with an organizing system for tools and mandrel bars. An economical alternative to a fully controlled CNC machine. POSSIBLE APPLICATIONS: • Hydraulic piping • Pipeline construction • Plant engineering, e.g. for chemical industry • Metal construction • Prototype construction Technical data: • Bending capacity Ø 6 to 50 x 4 mm depending on material • Min/max bending radius: 10 mm/140 mm • Minimum bending radii: 1.5 x Ø (standard 2 x Ø) • Multi-function machine control, bending angle setting (0.1°) • Mandrel carrier lengths: 1500/3000/4500/6000 mm (special lengths available) • Maximum 180º bending angle • Weight: 600-700 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimum quantity) • Pneumatic or hydraulic quick-action chuck • Positioning of length and rotation via automatic braking function or manual stops using the foot switch • Semi-automatic positioning of length and rotation via servomotors • Pneumatic rotation stop • Tube calculation software • Laser-assisted tool monitoring for supervision of tool clamping • 10-inch touch screen with integrated tube calculation • Bending radius up to 250 mm • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Welcome for test production at our facility in the demo room • Consultation and information session at your location • Leasing/financing purchase consultation and handling via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME APPLICATIONS: The compact bending machine enables precise and repeatable bending up to an external diameter of 100 mm, both in stationary operation and directly at the installation site. Transport can be carried out using a pallet truck or with the optionally available rollers. A robust three-phase motor and precision gearbox ensure powerful drive performance. The machine stands out due to its compact and slim design as well as the exceptionally open bending area. Direct position detection on the bending axis guarantees optimal bending accuracy. Bending angle adjustment is quick and simple via a user-friendly, menu-driven interface available in 14 languages with touchscreen control, ensuring even more intuitive operation. Up to 100 bending programs can be stored for complex bending tasks, each supporting a sequence of up to 8 bends per geometry. The multifunctional control system allows variable adjustment of bending speed for forward and reverse motion, with a parameterizable overbending function to compensate for material springback. Using the four material characteristic curves, the machine automatically overbends the material to the required angle, thus ensuring highly precise results. The “stationary tube and rotating tool” principle minimizes the machine’s footprint. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to make bends with minimal deformation, for example, in stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square, and round iron profiles can be bent with ease. The KBV small radius bending device attachment allows extremely tight bending radii. POSSIBLE APPLICATIONS: • Plant engineering • Hydraulic piping • Serpentine bending • Prototyping • Plumbing and heating installations • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase current 400 V • Bending radius up to 500 mm • Multifunctional machine control, bending angle setting (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 model series with bending radii from 45 mm, incl. 40 mm hex shaft • PB20 profile bending attachment – for bending flat and square steel up to max. 100 x 10 mm, round steel up to max. 20 mm • KBV small bending device • Special tools according to specifications • Software adaptations for special applications OUR SERVICE: • You are welcome to visit our demo room for test production Hodondk N Ajpfx Al Iol • Consultation and information meeting at your site • Consulting and handling of lease/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine, featuring manual quick-release excenter clamping for tube fixation, enables efficient bending processes. The compact drive unit with a removable mandrel holder offers advantages for on-site assembly. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is easily and quickly set via a user-friendly touchscreen control with menu-guided interface. The advanced control system allows for two speeds and a programmable overbend function to compensate for material springback. The bending cycle time is significantly reduced thanks to the automatic "retract" function at the end of the bend. For complex bending tasks, programs can be saved, supporting sequences of up to 50 bends per geometry. An almost unlimited number of programs, as well as up to 200 materials, can be stored on the controller or via USB stick. The plug-in bending tools enable rapid changeover to other tube sizes. For challenging geometries, the machine’s bending direction can easily be reconfigured for standard right or left bending. The open bending unit allows, for example, the bending of railing frames with only one weld seam. Optional PC-based calculation software provides cut length calculations for the entire geometry as well as feed, twist, and bending angles for each bend. The mandrel retraction is programmable and can be actuated automatically before reaching a preset bending angle. POSSIBLE APPLICATION AREAS: • Plant engineering, e.g. chemical industry • Hydraulic pipework • Prototype construction • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Min/max bending radius: 10 mm/140 mm • Bending radii: 2 x D • Multifunctional machine control, bend angle adjustment (0.1° increments) • Mandrel holder lengths: 1500/3000/4500/6000 mm (special versions available upon request for longer lengths) • Maximum bend angle: 180º • Weight: 300–500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimum quantity) • Digital measurement for length and rotation (resolution 0.1) • Remote operation of all functions via traversing unit (rotation and length stop) • Bending radius up to 250 mm • PC-based tube calculation software OUR SERVICES: • Welcome to testing and trial production in our in-house demo room • On-site consultation and information discussion Hodpsnfvy Uofx Al Iel • Consulting and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Tahun pembuatan: 2025, nomor mesin/kendaraan: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm—either stationary or directly at the assembly site. A robust three-phase motor and precision gearbox ensure powerful drive performance. Position detection directly on the bending axis provides optimal bending accuracy. Setting the bending angle is quick and easy via a user-friendly, menu-driven touchscreen interface, ensuring even more intuitive operation. For more complex bending operations, up to 100 bending programs can be stored, each with a sequence of up to 8 bends per geometry. The multifunction controller allows variable adjustment of the bending speed for forward and return movement, and features a programmable overbend function to compensate for material springback. Utilizing four material characteristic curves, the system automatically overbends the material to the required bending angle, delivering highly accurate bending results. The “stationary tube, rotating tool” principle minimizes space requirements during bending. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to produce bends with minimal deformation in materials such as stainless steel and copper. With the PB20 profile bending attachment, flat, square, and round bars can be easily bent. The KBV small-radius bending device allows for extremely tight bend radii. POSSIBLE APPLICATIONS: • Plant engineering • Hydraulic piping • Meander bending • Prototype construction • Plumbing and heating installation Hjdeng Ax Sjpfx Al Iol TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Min./max. bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with 0.1° angle adjustment • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Roller bender RB43 – mounts on the hex shaft of the bending axis. By switching to continuous bending mode, the bending system acts as a drive unit. • Small-radius bending device KBV • Special tools available on request OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and information session at your premises • Advice and processing of leasing/financed purchases • Trade-in of your current machine • Service contracts and on-site maintenance

Kondisi: baru, Condition: new Delivery time: approx. 12 - 14 weeks from order Country of origin: Turkey Price: €187,100 Leasing rate: €3,536.19 Pressing force: 400 tonnes Bending length: 4,050 mm Axes: Y1 / Y2 / X and R axes Stroke: 365 mm Distance between uprights: 3,400 mm Throat depth in side frame: 410 mm Installation height: 630 mm Drive concept: hydraulic Rapid traverse Y-axis: 160 mm/s Working speed Y-axis: 10 mm/s Return speed Y-axis: 160 mm/s Backgauge X-axis travel: 650 mm Backgauge speed X-axis: 500 mm/s Backgauge R-axis travel: 250 mm Table height: 900 mm Table width: 154 mm Motor: 2 x 11 kW Length: 5,750 mm Width: 2,110 mm Height: 3,450 mm Weight: 27,780 kg INDIVIDUAL SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2, X, and R) CNC CONTROL SKY 22 - Full HD graphic display 21.5” with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy sketching of the bending contour with a finger) - User-friendly dialog-based programming, selectable in 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tooling selection in 3D mode - Automatic calculation of the flat length for sheet cutting - Automatic bending sequence calculation - Graphical product and tool memory - Correction options - USB ports and Ethernet connection for importing, backup, and program outsourcing - Windows operating system - Import support for IGES, STEP, DXF files Backgauge powered by servo motor on linear guides and ball screws Backgauge finger blocks on double linear guides CNC-controlled crowning (bombing) Upper tool 1010/A/75°, segmented and offset 4-V die block 60x60 2009 (V= 16, 22, 35, and 50 mm) Fiessler AKAS laser safety device mounted on upper beam Sheet support arms on linear guide Equipment according to CE regulations Oil filling Operating manual in GERMAN or ENGLISH ADVANTAGES OF THIS DESIGN: - The hydraulics run only during the upper beam movement - Low energy consumption - Low noise emission - High speed Hjdpfxswir A Ae Al Isl PRICE FCA TURKEY Options: CNC Control Delem DA-66 S CNC Control DELEM DA-69S 3D including PC software Profile-S with option to import 3D files

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 6 bulan, lebar total: 1.395 mm, panjang total: 1.178 mm, tinggi total: 1.612 mm, berat kosong: 620 kg, tahun perombakan terakhir: 2026, PARTA U DIREKT Dough Divider by WP Haton The PARTA U DIREKT dough divider represents a new generation of equipment developed from WP HATON's years of experience. This universal divider is suitable for all types of dough, including wheat, wheat-mixed, rye, firm doughs (such as pizza), and soft doughs (such as baguette dough). Exceptionally precise and versatile, this machine is renowned for its proven long service life and is suitable for nearly all dough types, meeting the requirements of most bakeries. Key Features: - Interchangeable conveyor system allowing direct deposit into moulds - Gentle dough handling - High weight accuracy - Wide weight range: 110-1000 g Hedpfx Aeygw Idsl Ijl - Robust drive and dividing mechanism design - Tiltable hopper for easy cleaning - Convenient access to all components for maintenance and cleaning - User-friendly operation Technical Data: - Dough piece weight range: 110-1000 g - Fixed output: 1,850 or 2,100 pcs/h - Variable output: 925 – 3,150 pcs/h - Installed electric power: 2.4 kW - Dimensions (L/W/H): 1395 x 1178 x 1612 mm - Net weight: 620 kg

Kondisi: diremajakan ulang (bekas), Technical Specifications Metal base, Control cabinet, Control panel, Siemens brand, Hodpot Ibgrsfx Al Isl All essential information visible to the operator on a touchscreen interface, Long service life, Can be synchronized with all types of packaging machines; operates inline with case packers, bag applicators, and/or vertical form fill seal machines (VFFS), Product-contact parts made of stainless steel or food-grade plastics, Available with 2, 4, 6, or 8 channels. Each channel is equipped with a backlash-free eccentric drive, User-friendly operation.

Kondisi: bekas, Tahun pembuatan: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA": TOP-LEVEL QUALITY AND PRODUCTIVITY SOFTWARE XILOG MAESTRO: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (reference side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length in pendulum operation mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air velocity m/s 25 Extraction port diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in gantry design with workpiece support table, suitable for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Grooving with disc cutter - General milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded reinforcements across the entire machine bed, ensuring extreme stability. The specially designed table form, with a broad base, is key to guaranteeing lasting precision and stability. The machine layout allows the operator an optimal workflow while keeping space requirements to a minimum. The mobile gantry carrier is constructed from a solid monoblock. It is positioned in the X-direction on prismatically ground guides with recirculating ball carriages. The machining unit on this mobile aggregate carrier is also guided on prismatically ground guides and recirculating ball carriages AXIS TRAVEL All axes move on large-section linear prism guides and recirculating ball shoes with a large support surface, ensuring optimal sliding even at maximum speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved by helical rack and pinion. Large-section recirculating ball screws ensure precise positioning of the working unit along the mobile gantry (Y- and Z-axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, dimensioned to allow speeds of up to 90 m/min while maintaining the best finishing quality CONTROL The control unit consists of a numerical controller for milling and drilling machines with the "Xilog Maestro" graphical user interface running on: - Office operating system Windows 7 - 17” color LCD screen - QWERTY keyboard - Swiveling control panel - Machine operation interface with Xilog Maestro software Xilog Maestro Features Programming - Parametric graphical programming - Import of DXF files (2D; geometries "SPLINE", "POLYLINE 3D", line or circle interpolation in three axes, linear in space, spiral interpolation in the selected plane) - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Capability for panel zero-point shifting to execute drilling on inclined or curved panel edges Hjdpfxsy Dta Se Al Iel

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, berat keseluruhan: 195 kg, tinggi total: 2.000 mm, panjang total: 1.800 mm, lebar total: 815 mm, kapasitas angkut: 450 kg, new-and-unused-type-kbf-450-h-load-capacity-450-kg-lifting-drive -electrohydraulic-mobile-lightweight-counterweight-crane-compact- design-ideal-for-small-spaces-millimetre-precise-lowering-possibl e-safe-special-hydraulics-fits-through-any-standard-door-easy-ope ration-solid-rubber-tyres-for-easy-pushing-on-uneven-ground-small -turning-radius-maximum-mobility-jib-adjustable-in-five-length-po sitions-quickly-folded-and-ready-for-transport-looking-for-a-flex ible-mobile-crane-for-lifting-tasks-in-confined-areas-easy-and-qu ick-to-transport-from-one-location-to-another-then-this-is-the-pe rfect-mobile-counterweight-crane-with-a-load-capacity-of-up-to-45 0-kg-the-kbf-series-optimises-workflows-saves-time-and-protects-y our-staffs-backs-mobile-mini-jib-crane-kbf-with-removable-counter weights-the-mobile-mini-jib-crane-kbf-impresses-with-its-compact- design-and-exceptional-versatility-as-a-mobile-lightweight-counte rweight-crane-it-is-ideal-for-use-in-the-tightest-of-spaces-its-s mall-turning-radius-and-precise-special-hydraulics-allow-jib-cont rol-and-lowering-to-the-millimetre-ensuring-fast-and-safe-operati ons-thanks-to-the-adjustable-jib-with-five-length-positions-this- mobile-crane-offers-maximum-flexibility-it-fits-easily-through-an y-standard-door-with-its-smart-design-and-user-friendly-operation -the-kbf-is-quick-to-fold-and-immediately-ready-for-transport-its -compactness-also-enables-transport-with-smaller-vehicles-storage -and-transport-are-easy-thanks-to-removable-counterweights-each-w eighing-just-22-kg-a-total-of-13-counterweights-included-fitted-w ith-solid-rubber-tyres-two-large-front-wheels-and-small-rear-whee ls-enabling-smooth-travel-over-small-obstacles-the-solid-rubber-t yres-not-only-offer-significantly-more-comfort-when-pushing-but-a lso-make-it-easier-to-manoeuvre-on-uneven-surfaces-the-robust-con struction-and-safe-special-hydraulics-provide-reliable-and-easy-o peration-the-kbf-series-mobile-jib-crane-is-available-in-the-basi c-version-and-as-an-optional-electric-version-offering-increased- comfort-the-kbf-450-h-model-features-an-electrohydraulic-hoisting -drive-for-the-load-hook-which-can-be-conveniently-operated-via-c able-remote-control-more-information-from-tiger-hebezeuge-kbf-ser ies-includes-round-bar-gripper-80-300mm-250kg-block-gripper-with- prism-jaws-100-280mm-150kg-2-leg-chain-sling-1600kg Hedpfjy H Da Uex Al Ijl

Tahun pembuatan: 2015, Kondisi: bekas, Year of manufacture: 2015 Condition: very good Counter reading: 2,116,000 Technical specifications: - Size - min. / max.: 80 x 100 mm / 500 x 700 mm - Min. creasing distance: 0.1 mm - Optional perforating tools: 2/1 - 3/1 - 4/1, standard creasing kit Hodpfxoy Hkyzo Al Iel - Output: 8,000 A4 sheets/hour - Paper weight: 80 - 400 gsm Configuration: - Creasing tool, milled, 2 grooves - Perforating tool The PIT STOP DG LINE 8000 series creasing and perforating machine is based on the previous 6500 model version. It is equipped with a user-friendly 7-inch colour touchscreen display and reaches speeds of up to 8,000 sheets per hour (A4 with 1 crease). It is primarily intended for low to medium volume jobs. The unit stands out for its high precision and wide versatility of creasing tool settings, including tools for tear-off perforation. The maximum sheet size is up to 50 × 70 cm, which can be increased to a length of 85 cm with optional accessories. The machine can also be extended with an online folding module capable of folding up to 450 gsm.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2016, jam operasional: 1.685 h, kecepatan maksimum: 80 km/j, berat keseluruhan: 11.500 kg, tinggi total: 2.500 mm, mobilitas: stasioner, nomor mesin/kendaraan: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Several spare flails are still available and will be included. All 8 V-belts replaced recently. Both NOx and AdBlue sensors are new. Important note: Drawbar is bent, so the machine currently does not have road approval. Throughput: 60-100 m³/h, depending on the material and feed device Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s description: FLAIL SHREDDER HFG VI “These powerful Husmann machines, designated 'HFG (Husmann Forestry Equipment),' achieve uniform, fine, and clean shredding through a special impact technology and flail arrangement. The shredded material is transported via a spacious intake hopper with a forged steel chain conveyor to the feed roller and then to the flail rotor. The pendulum-mounted feed roller is guided with a rack and hydraulically driven by a large reduction gearbox. The feed roller, which adapts to the incoming material, can also be controlled and lifted using the remote control. The roller or feed opening of 460 mm ensures smooth and rapid feeding. The robust rotor, made of high-quality steel (1000 kg), is fracture-proof even when handling heavy foreign materials, thanks to additional bracing and sophisticated design. Sixty free-swinging flails are staggered on eight hardened flail shafts. The quick-change system allows the tungsten carbide-tipped flail tips to be bolted onto the flail holders. Thanks to the large number of 50 mm wide flails, and the rotor’s direction of rotation over a breaker bar toward the infeed belt, the material is shredded optimally and made suitable for composting. The quality of the end product can be further adjusted and improved by the load-dependent and infinitely variable feed speed of the scraper floor and the feed roller. Hodpjy Hi D Sefx Al Isl The rotor trough and discharge area design allow stockpiling up to 2.5 meters high. The powerful superstructure engine with 205 kW is easily accessible through large compartment doors, making operation and maintenance straightforward. User-friendly controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit features an 80 km/h chassis with air brakes and can be supplied as either a stationary device or with a hook lift frame. The HFG IV is a composting machine for organic and inorganic waste designed for mechanical feeding.” If you have any questions or require further information, please feel free to send us a message or give us a call.

Tahun pembuatan: 2020, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, This is the latest generation iVario Pro 2-S from the premium manufacturer Rational. The iVario Pro 2-S is offered including a complete accessory kit (see photos). The multifunctional tilting pan has undergone a comprehensive inspection in our in-house specialist workshop. The unit is offered with a 6-month warranty on all electrical components. The stand is not included in this offer and must be purchased separately. The iVario Pro 2-S is available from calendar week 18. The original gross list price for this unit is €21,063. The original gross price for the standard accessories is €1,192.38. Our all-inclusive price (gross): €9,995 You will receive an invoice with VAT shown separately. Service: We are happy to assist in arranging contact with a certified Rational service partner throughout Germany. Our used equipment service for you: - 6-month warranty on all electrical components, limited to replacement of defective parts, excluding labor for removal and installation - High-quality branded equipment at fair prices - Professional refurbishment / inspection & expert cleaning - Tested & fully functional – or your money back - Shipping or collection – flexible options - Competent advice – before and after purchase - Provision of user manuals, wiring diagrams & spare parts - DGUV V3 electrical safety inspection Technical data: Dimensions (W x D x H): 1100 x 938 x 485 mm (1080 mm with stand) Power supply: V: 400 / kW: 20.5 / Hz: 50 Serial number: E11VK20108049510 Year of manufacture: 2020 Weight: 134 kg Capacity: 2x 25 liters Meals per batch: 50-100 Condition: Used, inspected, fully functional Further features: - Integrated hand shower with automatic retraction and adjustable spray - High-quality pan base - Seamless design with rounded corners - Core temperature probe with 6 measurement points - 1,200 programmable recipes, each with up to 12 steps, programmable and nameable - Integrated hose shower on unit, built-in water drain in the pan - Temperature display selectable in °C or °F Hodpfx Alsy Drmqo Iel - Tiltable cooking pan - Lid with integrated water inlet - Automatic service message display - IPX5 water jet protection - USB interface for HACCP data export and updates Functions: - Manual mode (30°C-250°C): Set liquid temperature, set pan base temperature, set oil temperature, automatic precise water fill, Delta-T cooking - Auto Lift: Automatic lifting and lowering (for cooking and frying baskets) Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain locations only by prior agreement Subject to changes and errors. Do you have any questions, require consultation, or wish to view the item on site? You can reach us by phone during our business hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is subject exclusively to our general terms and conditions (GTC).