Beli Pers Penyematan Hangat bekas (20.070)

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 10.000 h, lebar total: 1.300 mm, panjang pemakanan sumbu X: 4.500 mm, Telah direkondisi. Generator merek Sonar 60 kW. Ukuran penekanan: 4500 mm x 1500 mm (4,50 x 1,30 m). Dilengkapi dengan unit lem otomatis yang mengaplikasikan lem secara mandiri. Iedpfx Asyvhl Tol Djih

Kondisi: baik (bekas), Tahun pembuatan: 2002, Manufacturer: Millutensil Model: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure: 0 - 250 bar T-Slot Size: T-22 Opening force: 35 tons Closing force: 150 tons Distance between columns: 2130 mm Table height above floor: 770 mm Iisdpfjwpkv Isx Al Djh Upper table rotation: 180 degrees Specifications Metric / US Standard Capacity: 30,000 Distance between uprights: 2130 mm Table length: 2,000 mm Table width: 1,500 mm Table height: 1,500 mm Approach speed: 3,900 - 4,800 mm/min Working speed: 480 mm/min Return speed: 2,100 - 3,000 mm/min Dimensions (approximate) Length: 6,150 mm Width: 3,500 mm Height: 4,800 mm Weight: 28,000 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute any representation or contractual terms. We recommend that you verify all important details yourself.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 700 t, panjang langkah: 1.500 mm, berat keseluruhan: 50.000 kg, Perlengkapan: dokumentasi / manual, Used composite press, previously operated in Belgium. The press underwent a comprehensive overhaul in July 2015. The original year of manufacture is 1990, but the modernization was extensive. The machine has seen very little use, primarily operating in a research institute. Due to the power supply being disconnected, I could not verify the operating hours, but the equipment appears as new, with no signs of wear on working components. Currently located in Poland, 63-300 Pleszew. Press force: 700T Upper platen dimensions: 180x240 cm Platen stroke: approx. 150 cm The press was utilized for the development of the famous carbon space frame for the AUDI R8 and was operated in a research and development institute near Brussels. Occasionally, it was also used for commercial production. The press is practically as new. Complete modernization and technical documentation are available. The equipment was dismantled by myself; the sale price includes complimentary assembly at the customer’s location. I will restore the machine to its pre-dismantling condition. The buyer is responsible for providing a large forklift (approx. 44T capacity), compressed air, and accommodation for 3 people for 14 days. I offer and cover the cost of a professional assembly team across Europe. Iiedpfx Aljwtbc Ts Doh It is very likely the machine will need to be configured for the new owner’s operations. This can be handled, for an extra fee, by the Dutch company responsible for the 2015 comprehensive modernization; the cost will depend on buyer requirements. Transport costs will be very competitive, as I collaborate with a specialized freight forwarder offering excellent rates. Total weight of the machine: approx. 50T.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 500 t, panjang langkah: 400 mm, lebar meja: 1.600 mm, panjang meja: 900 mm, tahun perombakan terakhir: 2017, Perlengkapan: penghadang cahaya keselamatan, Dieffenbacher PO 500A Press A Dieffenbacher PO 500A press in very good technical condition, available for sale from a decommissioned stamping plant in Poland. Modernized in 2017 with a new Simatic S7 control system and new electrical cabinet. Iiedpfx Alov E Nlzj Doh Equipped with optical safety barriers. The machine can be inspected under power – the press remains connected and operational.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 1.250 t, panjang langkah: 630 mm, lebar meja: 1.270 mm, panjang meja: 1.250 mm, berat keseluruhan: 70.000 kg, tinggi kerja: 900 mm, Perlengkapan: penghadang cahaya keselamatan, Mesin Press Dieffenbacher P0-F 1250A Iodpfxjv E Rihe Al Dsih Mesin press dalam kondisi teknis yang sangat baik untuk dijual dari sebuah pabrik penempaan yang sedang dilikuidasi di Polandia. Dimodernisasi pada tahun 2016. Sistem kendali Simatic S7 baru dan lemari listrik baru. Pagar pengaman optik juga telah dipasang.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 630 t, lebar meja: 2.500 mm, panjang meja: 1.600 mm, berat keseluruhan: 100.000 kg, Perlengkapan: penghadang cahaya keselamatan, Müller ZE 625 4 Press Iisdjv Hp T Ujpfx Al Djh A press in very good technical condition, available for sale from a decommissioned stamping facility in Poland. Modernized in 2020. Equipped with a new Simatic S7 control system and a new electrical cabinet. Fitted with optical safety barriers. Possibility to inspect the machine under power – the press remains connected to electricity.

Kondisi: bekas, Lapmaster 24, diameter 600 mm, 3 cincin. Mesin ini dapat diperiksa saat beroperasi di gudang kami. Mimu Machine Tools (Italia). Iedpszi Encofx Al Deih Diameter: 600

Kondisi: bekas, Tahun pembuatan: 2008, berat keseluruhan: 1.250 kg, lebar total: 1.220 mm, panjang total: 2.700 mm, tinggi total: 2.245 mm, daya panas nominal: 600 kW (815,77 hp), Nomor 10035 2 unit Pembangkit Udara Panas Stasioner Kroll 730 S-300 Bekas, Tahun Pembuatan 2008 Menurut pelanggan kami / pemilik sebelumnya, mesin-mesin ini berfungsi dengan baik dan dapat diperiksa di lokasi Daya pemanas QN: 600 kW Beban panas nominal QB: 652 kW Daya udara panas VN: 48300 m3/jam Tekanan nominal DN: 300 Pa Motor: 15,0 kW / 28,6 A Sesuai dengan standar CE Dimensi pengiriman masing-masing sekitar 2700 x 1220 x 2245 mm (P x L x T) Berat masing-masing sekitar 1250 kg Penjualan atas permintaan pelanggan, dari lokasi dekat 69123 Heidelberg, tanpa pembongkaran, tanpa pengangkutan dan pemasangan Pembongkaran, pemuatan, dan pengangkutan dapat dilakukan oleh kami (opsional) Kesalahan dalam deskripsi dan harga dapat terjadi Untuk menghindari kemungkinan kesalahpahaman, pemeriksaan di lokasi dimungkinkan dan disarankan setelah perjanjian sebelumnya Penjualan dilakukan dalam kondisi apa adanya Spesifikasi teknis, deskripsi kondisi, tahun pembuatan, dan cakupan pengiriman sesuai dengan brosur pabrikan atau pemilik sebelumnya, tanpa jaminan Penjualan antara waktu dapat terjadi Untuk mesin bekas, semua jaminan dikecualikan, berlaku: "dibeli sesuai dengan kondisi yang diperiksa" Gambar dan video hanya sebagai contoh dan tidak mewakili cakupan pengiriman yang sebenarnya Iodpfx Alezlr Uus Deih Ketentuan pembayaran: Harga ditambah PPN sesuai dengan peraturan yang berlaku, pembayaran sebelum pengambilan atau pengiriman Ketentuan pengiriman: dari lokasi

Kondisi: bekas, druck-35-t-ausladung-300-mm-hub-10-120-mm-hubzahl-110-hub-min-st osselverstellung-50-mm-gesamtleistungsbedarf-3-ps-verstellbarer-t isch Ijdpfjykb D Rsx Al Doih

Kondisi: bekas, Tahun pembuatan: 1992, Druck 25 t Ausladung 375 mm Iiedeykb Ebepfx Al Djh Hub 8 - 80 mm Hubzahl 120 Hub/min Stößelverstellung 45 mm Gesamtleistungsbedarf 1,5 kW Maschinengewicht ca. 2,5 t - hydraulische Kupplung - fester Tisch

Tahun pembuatan: 2003, Kondisi: bekas, Press laci Schubkasten ZUB / ZVB Pembuatan Perlengkapan Terpusat, bekas, ukuran (PxTxd): sekitar 220x210x110 cm, dengan 4 unit pengepres, dapat digerakkan secara elektrik, 1 lemari kontrol, terminal pengoperasian. Iedsx Dkw Sepfx Al Dsih

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 20 t, Straightening Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Single-Column Press – Table 500 × 600 mm For sale: a compact single-column straightening press (C-frame) from the manufacturer Durendus, model DCS-20, featuring an adjustable pressing force from 5 to 20 t. The machine is equipped with a table size of 500 × 600 mm, a maximum installation height of 700 mm, and boasts a robust, low-maintenance design, making it ideal for straightening, assembly, and press-fitting tasks. ==== Technical Data & Information: Straightening Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,150 × 1,250 × 2,469 mm ==== Working Area - Installation height: max. 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or as per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 100 mm - Piston rod diameter: Ø 60 mm - Operating pressure: max. 250 bar Iedeyghvfepfx Al Djih - Return speed: 50 mm/s - Rapid approach speed: 25 mm/s - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 11 l/min - Motor power: 4 kW - Oil tank volume: 150 l - Hydraulic manifold / valves: Hydropack - Filter: Filtrec - Oil level monitoring: Electronic oil level sensor - Hydraulic unit: mounted at the rear, top - Pressure accuracy: ± 5 bar ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connected load: approx. 4 kW ===== Straightening tasks, assembly operations, press-fit applications, workshop use, maintenance, small batch production Straightening press, single-column press, C-frame press, hydraulic press, shop press, press-fitting press Looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are built according to both German and European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds upon these standards. Our key strength lies in custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. Only top-quality hydraulic components from leading European manufacturers are used in our presses.

Kondisi: baru, Tahun pembuatan: 2024, Speed under load: 2.7 mm/sec Pressure: 100 t Stroke: 400 mm Table area: 920 x 560 mm Approach speed: 4.25 mm/sec Return speed: 8.22 mm/sec Max oil pressure (in working cylinder): 385 bar Iiodpsvcrm Ajfx Al Deh Oil capacity: 26 l Piston diameter: 125 mm Frame opening: 920 mm Voltage: 400 V / 50 Hz Total power requirement: 4 kW Machine weight: approx. 0.9 t Space requirement: approx. 1.7 x 0.9 x 2.1 m Unused workshop press (demonstration machine) Manual and hydraulic operation Pressure cylinder movable horizontally Table height adjustable via hydraulic cylinder Cylinder diameter: 175 mm, piston base diameter: 125 mm,

Kondisi: baru, dr20t-700mm-specs Ijdpfjyv Nuvjx Al Doih

Kondisi: baru, Tahun pembuatan: 2025, masa garansi: 12 bulan, lebar total: 1.400 mm, panjang total: 1.400 mm, tinggi total: 2.000 mm, kecepatan rotasi (jarak/waktu): 50 mm/menit, Rotation Tablet Press SPT-TP500DH Salt Production Touch screen, PLC control panel; Ijdpfxsvu Uk Uo Al Djih HMI (Human Machine Interface); SPT-TP500DH Specifications: Number of Stations: 33 Standard Tools: EU 1" (IPZ1") Max. Output per Hour: 180,000 pcs Rotation Speed (rpm): 5–50 Max. Tablet Dimension (Round): 30 mm Max. Filling Depth: 35 mm Upper Punch Penetration (max.): 1–6 mm Max. Main Compression Force: 20 t Die Diameter: 41.30 mm Die Height: 38.10 mm Punch Barrel Diameter: 31.70 mm Punch Length: 154 mm Machine Dimensions with Hopper (L x W x H): 1,400 x 1,400 x 2,000 mm Machine Weight: 7,000 kg Power Rating: 20 kW Voltage / Frequency: 240/400 V – 50/60 Hz

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, TECHNICAL SPECIFICATIONS: Press Model: T160 CNR6 Serial Number: 160/0/46/00 Year of Manufacture: 2000 Nominal force: 1,600 kN Weight: 13,800 kg Nominal strokes: 55 SPM Min./Max. strokes: 10/55 SPM Max. insertions: 17 SPM Clutch pressure min./max.: 4.0–5.5 bar Max. stopping time: 0.22 s Safety distance: 355 mm Energy (at 15% nominal stroke): 14,500 kJ Min./Max. slide stroke: 10/200 mm Ram adjustment: 110 mm Iiodpfxewaiw Sj Al Dsh Highest TDC (Top Dead Center) adjustment: 430 mm Max. ejector stroke: 60 mm Table dimensions (H, D, W): 78/750/1250 mm Slide dimensions (D, W): 600/850 mm Shank diameter: 60 mm Shut height from bolster: 370 mm Max. tool size: 600/850 mm Max. die head weight: 344 daN Operating air pressure: 5.5–6 bar Arrest position: TDC Voltage: 380 V Frequency: 50 Hz Auxiliary voltage: 24 V NEWLY INSTALLED COMPONENTS: • Safety guards with interlock switches • Clutch plates • Clutch pins and bushes • Flywheel bearings • Flywheel oil seals • Adjustable stroke nose • Counterbalance cylinder seal kit • Air pressure gauges • Electrical control panel • Inverter (variable speed drive) • Motor • Motor pulley • Table resurfaced on CNC machine Supplied with a six (6) month warranty, technical documentation, and CE conformity Electrical control panel warranty: twelve (12) months.

Kondisi: baik (bekas), Tahun pembuatan: 2000, offer 24467 Technical specifications: - Max. pressing force: 10 t - Max. ram stroke: approx. 550 mm Ijdpfxjuzhmgs Al Dsih - Tool mounting thread: M 16 - Upright width: approx. 1000 mm - Upright depth: approx. 500 mm - Min. / max. installation height: 450 / 1350 mm - Table height adjustable - Required space: approx. W 1600 x H 2650 x D 850 mm - Weight: approx. 350 kg

Kondisi: baik (bekas), Tahun pembuatan: 1977, 1 unit excenter press bekas Merek: Helmerding Tipe: EL 35 B Tahun pembuatan: 1977 Iiodewxxr Aepfx Al Dsh No. mesin: 5182 Daya tekan: 350 kN Langkah dapat diatur: 12 - 80 mm Ram dapat diatur: 70 mm Penurunan ram per menit: 110 Meja dapat diatur: 150 mm Jarak aman: 150 mm Jarak sisa: 50 Berat: 2050 kg Dilengkapi dengan Katup keselamatan untuk mesin press

Kondisi: baru, Tahun pembuatan: 2025, Also available in various models! 1. Bale size: 400 mm x 400 mm x ... 2. Press box dimensions (W x L x H): 1000 mm x 2700 mm x 900 mm 3. Feed hopper dimensions (W x L x H): 1650 mm x 2300 mm x 800 mm 4. Feed opening (W x L): 1000 mm x 1600 mm 5. Capacity: 4-6 tons/hour (aluminum), 12-19 tons/hour (copper), 11-17 tons/hour (steel) 6. Cycle time: 30 seconds 7. Preliminary compression force: 140 tons 8. Secondary compression force: 210 tons Iiodpfxodfcqas Al Deh 9. Main compression force: 290 tons 10. Working pressure: 300 bar 11. Electric motor: 150 kW 12. Machine weight: 60,000 kg 13. Remote control available 14. Curved design of the compression chamber plates

Kondisi: baru, Tahun pembuatan: 2024, Berbagai model juga tersedia! 1. Ukuran bal: 600 mm x 400 mm x ... 2. Dimensi wadah (lebar x panjang x tinggi): 620 mm x 1300 mm x 620 mm 3. Kapasitas: 0,8 - 1,2 ton / jam (besi - baja) 4. Berat bal: 45 - 100 kg 5. Waktu siklus: 90 detik 6. Tekanan silinder penutup atas: 63 ton 7. Tekanan silinder utama: 110 ton 8. Tekanan kerja umum: 250 bar 9. Dimensi mesin (lebar x panjang x tinggi): 2120 mm x 4350 mm x 1320 mm 10. Motor listrik: 15 kW 11. Berat mesin: 6.800 kg 12. Batang piston diperkeras secara induksi dan dilapisi krom. 13. Terdapat tuas kontrol manual. 14. Dinding ruang skrap dilapisi dengan material HARDOX 450. 15. Mesin dioperasikan secara manual. 17. Akan dilengkapi sistem pendingin oli. 18. Seluruh material elektronik disediakan oleh SCHNEIDER atau merek SIEMENS. Iiodpfxodfc Une Al Dsh 19. Mesin berada di bawah garansi AYMAS Makina San. Ve Tic. Ltd. Şti. terhadap cacat produksi selama satu (1) tahun atau 2500 jam operasi.

Kondisi: baru, Tahun pembuatan: 2025, Kleine hydraulische Brikettierpresse. Der Hauptmotor hat eine Leistung von 4 kW, der Brikettdurchmesser beträgt 50 mm. Die Presskapazität liegt bei 30–50 kg pro Stunde. Die Maschine ist neu und verfügt über ein CE-Zertifikat. Optional ist ein Ölkühler erhältlich. Für weitere Informationen besuchen Sie unseren YouTube-Kanal, unsere Webseite oder unsere Facebook-Seite. Isdpfjfk N Tpsx Al Dsih

Tahun pembuatan: 1990, Kondisi: diremaj di bengkel (bekas), Hydraulic press – equipped with 4 independent pressing cylinders. Pressing with simultaneous rewinding. Iedpfx Ajgcvfnjl Djih It was used for manufacturing cans for automotive oil and fuel filters. Specification of processed parts: Sheet thickness: 0.4–0.6 mm Material grade: black steel or galvanized steel Can diameter: 68 mm – 96 mm Can length: 50 mm – 180 mm The entire control system, including wiring, controllers, monitor, etc., has been replaced.

Kondisi: diremajakan ulang (bekas), PORTAL-RICHTPRESSE Ijdpfxofcnu Is Al Deih DRUCKKRAFT: 450 t HUB: 50 mm LICHTE WEITE: 1.000 mm ARBEITSBEREICH: LÄNGE: 5.200 mm BREITE: 2.300 mm HÖHE: 1.000 mm GEWICHT: 45.000 kg SCHRAUBENABSTAND LINKS-RECHTS: 1.000 mm

Kondisi: bekas, EN: Digital scale for press brake, folding machine, guillotine shear... glass scale, linear glass scale, scale, digital readout, measuring scale, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital readout Iioded Ndkbspfx Al Dsh - from: Hämmerle AP 100 press brake - Length (measuring unit): 420 mm - Quantity: 2 units available - Price: complete - Dimensions: 550/80/H40 mm - Weight: 4.4 kg

Kondisi: bekas, SCHULER Iodpfx Aergp N Hsl Doih TYPE 315-400 PRESS FORCE: 315 t STROKE LENGTH: 30–160 mm STROKES PER MINUTE: 36