Beli Sistem Pembersihan Laser bekas (22.893)

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Dijual mesin las otomatis empat kepala SCHTEC WM740, jarang digunakan dan kondisinya hampir seperti baru, lengkap dengan pembersih sudut otomatis WM620, stasiun pendingin, dan lengan pemutar otomatis. Jika dibeli satu paket dengan pusat pemesinan SMC350 dan obeng otomatis dua kepala Pressta yang tercantum di iklan kami, harga paket adalah 180.000 EUR. Untuk informasi lebih lanjut, silakan hubungi kami. Gedpfoyzimcjx Aazeka

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), Parts cleaning system / spray cleaning system type CM13 2-tank (washing + rinsing) including air knife blow-off Basket diameter: 1,300 mm (octagonal) Max. load capacity: up to 1,000 kg Basket is loaded and unloaded by the operator using a feed trolley positioned in front of the unit (detachable / mobile). Usable height: 800 mm Washing tank: volume: 430 litres, spray pressure: 6.0 bar Rinsing tank: volume: 280 litres, spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following equipment: + Automatic water refill on both tanks + Automatic chemical dosing 1-10% (Dosatron) + Special spray system (can be optionally activated) for small parts (= E-spray system) + Side channel blower with height-adjustable air knife system (blow-off drying) + Steam extraction with condensate return + Weekly timer for electric heating + Pre-installed for retrofit of oil separator + Media filtration in both circuits (washing and rinsing) via bag filter (manufacturer: Eaton, Topline) + Exterior cladding with stainless steel sheet + Complete system fully insulated + Tanks separated into two modules; fully insulated (different temperatures possible) + Removable filter baskets in recirculation + Stainless steel circulation pumps with mechanical seal and soft starter System is on display at the Glogar Technology Center and is used exclusively for washing trials. Gjdpfev Tm Ayox Aazska

Tahun pembuatan: 2025, Kondisi: baru, Parts Cleaning Machine, Spray Cleaning System Type L122 Gksdpfx Aohl Ic Rjazja Automatically operating hot water chamber washing machine with basket drive via gear motor; system enclosure made of stainless steel 1.4301. - 2 pieces of 3-sided stainless steel nozzle systems with stainless steel flat jet nozzles - 2 stainless steel wash pumps (Manufacturer: Xylem/Lowara) - Level regulation for dry-run protection - 2 suction filters for pump protection - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Useful height: 700 mm - Max. load weight: 300 kg - Spray pressure: 2x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (room temperature - 60°C) - Connected load (electrical): approx. 11.5 kW - System dimensions (W x D x H): 1,480 x 1,540 x 2,195(h) mm

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Unit Pembersih Ultrasonik ULTRA300 Dimensi efektif platform: 1.050 x 550 mm Maks. tinggi pemakaian: 450 mm Gksdpfexuzyfex Aazsa Maks. berat muatan: 300 kg Volume: 585 liter + 70 liter (pemampat minyak) = 655 liter Pemanas: 2 x 6 kW konstruksi sepenuhnya dari baja tahan karat isolasi termal dan suara Dimensi luar kira-kira: P 1.700 x L 1.050 x T 2.000 mm Kontrol merek Fatek, HMI merek Weintek Daya sambungan listrik: 15 kW termasuk: - lift barang pneumatik otomatis - penyiraman permukaan/pemampat minyak untuk perawatan bak - transduser rendam ultrasonik dengan suara dua sisi - Daya: 3.000 watt eff. / 6.000 watt puncak – Multifrequency: 20 kHz / 40 kHz - pistol peniup manual Unit demo dari Pusat Teknologi Glogar, tersedia segera

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Ultrasonic Cleaning System ULTRA200 Gkedpfx Ajv U A Izeazoa Usable platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. loading weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Constructed entirely from stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control: Fatek, HMI by Weintek Electrical connection load: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface rinsing/oil separator for bath maintenance - Ultrasonic immersion transducer with dual-side sonication - Output: 2,000 W effective / 4,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration unit from the Glogar Technology Center, available immediately

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Parts cleaning machine, spray cleaning system type L800FP Fully automatic hot water parts washer with basket drive via gear motor, housing made of stainless steel 1.4301, pipework and rotary basket made of zinc-plated steel, special nozzle system with stainless steel flat spray nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Useful height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar Gsdpfxeuxuv Aj Aazjka - Tank capacity: 120 liters - Heating: electrically adjustable (ambient temperature – 60°C) System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Suction filter protects pump Delivery: ex works, FCA

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 8421 x 2250 x 2250 mm Weight: 5500 kg Total Power Requirement: 11 kW Fiber Laser Cutting System FL-3015 4000W DELUXE - Working area: 3000 mm x 1500 mm - Fiber laser power: 4000 W, Raycus type - Laser wavelength: 1070 nm - Cutting depth: up to 16 mm carbon steel up to 10 mm stainless steel up to 10 mm aluminum up to 8 mm brass up to 5 mm copper up to 10 mm galvanized sheet - Laser module lifespan: over 100,000 hours (approx. 11.5 years) - X-axis travel: 3000 mm - Y-axis travel: 1500 mm - Z-axis travel: 100 mm - Drive motors: FUJI AC servo motors - Travel system (X & Y axis): rack and pinion - Linear guides - Positioning accuracy: ± 0.1 mm/m - Repeatability: ± 0.08 mm - Max. X/Y-axis acceleration: 0.6G - Max. traverse speed: 60 m/min - Controller: Au3tech - Red dot pointer for positioning - Power consumption: 11 kW - Voltage: 400 V / 50 Hz - Application: ideal for cutting carbon steel, stainless steel, etc. - Included follow-up fume extraction system: automatically opens the extraction flap when the laser head is operating and closes it automatically when finished - Full enclosure with modern industrial design for safety - Integrated interior camera for real-time monitoring - Interior LED lighting for machine maintenance - Integrated double-deck fume extraction system on the left, rear, and underside - Dual work table for higher efficiency during material loading - Dimensions (L=8421, W=2250, H=2250 mm) - Weight: 5500 kg Gkjdpfx Aasvz E D Sezea

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 8900x3700x2500 mm Weight 8300 kg Total power requirement 11 kW Gkjdpfx Asvz Haboazja Fiber laser cutting system FL-3015 3000W M3 DELUXE - Working area 3000 mm x 1500 mm - Additional device for tube processing up to 6 m - Round tube diameter from 20 to 200 mm - Square tube side length from 20 to 140 mm - Fiber laser power 3000 W, Raycus type - Laser wavelength 1070 nm - Cutting depth for sheet material: = 14 mm carbon steel = 8 mm stainless steel = 8 mm aluminium = 8 mm brass = 5 mm copper = 8 mm galvanized sheet - Cutting depth for tube processing: = 14 mm carbon steel = 8 mm stainless steel = 8 mm aluminium = 8 mm galvanized sheet - Laser module lifetime more than 100,000 hours, average 11.5 years - Travel path X-axis 3000 mm - Travel path Y-axis 1500 mm - Travel path Z-axis 300 mm - Travel motors: FUJI AC servo motors - Drive system (X & Y axis): rack and pinion drive - Linear guideways - Positioning accuracy ± 0.1 mm / m - Repeatability ± 0.08 mm - Max. acceleration X / Y-axis 0.6G - Max. movement speed 60 m/min - Control: Au3tech - Autofocus - Red dot positioning - Power consumption 11 kW - Voltage 400 V / 50 Hz - Application: ideal for cutting carbon steel, stainless steel, etc. - Includes follow-up extraction system: opens the extraction flap when the laser head is operating and automatically closes after operation - Full safety enclosure with modern industrial design - Integrated camera inside for real-time monitoring - LED lighting inside for maintenance - Integrated double-deck fume extraction system inside – left side, rear, and underside - Double worktable for higher material handling efficiency - Dimensions L=8900, W=3700, H=2500 mm - Weight 8300 kg

Kondisi: baru, Tahun pembuatan: 2025, Maße (Länge/Breite/Höhe): 2985 x 2160 x 2000 mm Gewicht: 2000 kg Gesamtleistungsbedarf: 30 kW Fibre Laser Cutting System FL-1313 2000W - Working area: 1300 mm x 1300 mm - Fibre laser power: 2000 W, Type RFL-C2000W - Laser wavelength: 1070 nm - Cutting depth: = 18 mm carbon steel Gjdpfx Aasvz E Rfszska = 10 mm stainless steel = 6 mm aluminium = 6 mm brass = 4 mm copper = 6 mm galvanised sheet metal - Laser module service life: more than 100,000 hours (approx. 11.5 years) - X-axis travel: 1300 mm - Y-axis travel: 1300 mm - Z-axis travel: 100 mm - Feed motors: AC servo motors by FUJI - Drive system (X & Y axis): rack and pinion - Linear guides - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.02 mm - Max. acceleration X / Y axis: 0.6G - Max. traversing speed: 80 m/min - Max. table load: 300 kg - CNC control: CypCut - Red-dot positioning - Power consumption: 30 kW - Voltage: 400 V / 50 Hz - Ideal for cutting carbon steel, stainless steel, aluminium, etc. - Includes extraction fan - Overall dimensions: 2985 mm x 2160 mm x 2000 mm - Weight: 2000 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 8900 x 3700 x 2500 mm Weight: 8300 kg Total power requirement: 11 kW Fiber Laser Cutting System FL-3015 1000W M3 DELUXE - Working area: 3000 mm x 1500 mm - Additional device for tube processing up to 6 m - Round tube diameter: 20 to 200 mm - Square tube side length: 20 to 140 mm - Fiber laser power: 1000 W, Raycus type - Laser wavelength: 1070 nm - Cutting thickness for sheet material: = 8 mm carbon steel = 4 mm stainless steel = 4 mm aluminum = 4 mm brass = 3 mm copper = 4 mm galvanized sheet - Cutting thickness for tube processing: = 8 mm carbon steel = 4 mm stainless steel = 4 mm aluminum = 4 mm galvanized sheet - Laser module service life over 100,000 hours, average approx. 11.5 years - X-axis travel: 3000 mm - Y-axis travel: 1500 mm - Z-axis travel: 300 mm - Drive motors: FUJI AC servo motors - Drive system (X & Y axes): rack and pinion - Linear guides - Positioning accuracy: ±0.1 mm/m - Repeatability: ±0.08 mm - Max. acceleration X/Y axis: 0.6G - Max. travel speed: 60 m/min - Control: Au3tech - Autofocus - Red dot positioning - Power consumption: 11 kW - Voltage: 400 V / 50 Hz - Application: ideal for cutting carbon steel, stainless steel, etc. - Including follow-up fume extraction system: opens the fume extraction flap when the laser head is operating at the position and closes automatically after work - Full safety enclosure with modern industrial design Gsdpevz Hb Eefx Aazoka - Integrated interior camera for real-time monitoring - LED lighting inside for maintenance - Integrated dual-layer fume extraction system on the left inside, rear side, and bottom - Double worktable for improved material handling efficiency - Dimensions: L=8900, W=3700, H=2500 mm - Weight: 8300 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 8421 x 2250 x 2250 mm Weight: 5500 kg Total Power Requirement: 11 kW Fiber Laser Cutting Machine FL-3015 1000W DELUXE - Working Area: 3000 mm x 1500 mm - Fiber Laser Power: 1000 W, Raycus type - Laser Wavelength: 1070 nm - Cutting Depths: = 8 mm carbon steel = 5 mm stainless steel = 4 mm aluminium = 4 mm brass = 3 mm copper = 4 mm galvanized sheet - Laser module service life: over 100,000 hours (approx. 11.5 years) - X-Axis Travel: 3000 mm - Y-Axis Travel: 1500 mm - Z-Axis Travel: 100 mm - Drive Motors: FUJI AC servo motors - Drive System (X & Y axes): Rack and pinion drive - Linear guides - Positioning Accuracy: ±0.1 mm/m - Repeatability: ±0.08 mm - Max Acceleration (X/Y axes): 0.6G - Max Traverse Speed: 60 m/min - Controller: Au3tech - Red-dot positioning - Power Consumption: 11 kW - Voltage: 400 V / 50 Hz Gkedpfxovz E N Uj Aazea - Application: Ideal for cutting carbon steel, stainless steel, etc. - Includes automatic follow-up fume extraction system: the fume extraction damper opens when the laser head is operating at the position and closes automatically after operation - Safety full enclosure with modern industrial design - Integrated internal camera for real-time monitoring - LED lighting inside the enclosure for maintenance - Integrated double-deck fume extraction system on the left, at the rear, and underneath the enclosure - Dual worktable for increased efficiency in material loading - Dimensions: L = 8421 mm, W = 2250 mm, H = 2250 mm - Weight: 5500 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 8900 x 3700 x 2500 mm Gksdpfx Aaevz Hb Sjzja Weight: 8,300 kg Total power requirement: 11 kW Fiber Laser Cutting System FL-3015 2000W M3 DELUXE - Working area: 3,000 mm x 1,500 mm - Additional device for tube processing up to 6 m - Round tube diameter: 20 to 200 mm - Square tube side length: 20 to 140 mm - Fiber laser power: 2,000 W, Raycus type - Laser wavelength: 1070 nm - Cutting thickness for sheet material: = 12 mm carbon steel = 6 mm stainless steel = 6 mm aluminium = 6 mm brass = 4 mm copper = 6 mm galvanized sheet - Cutting thickness for tube processing: = 12 mm carbon steel = 6 mm stainless steel = 6 mm aluminium = 6 mm galvanized sheet - Laser module service life: over 100,000 hours, average 11.5 years - Travel distance X-axis: 3,000 mm - Travel distance Y-axis: 1,500 mm - Travel distance Z-axis: 300 mm - Travel motors: FUJI AC servo motors - Travel system (X & Y axes): rack and pinion drive - Linear guideways - Position accuracy: ± 0.1 mm / m - Repeatability: ± 0.08 mm - Max. acceleration X / Y axis: 0.6G - Max. traversing speed: 60 m/min - Controller: Au3tech - Autofocus - Positioning with red dot - Power consumption: 11 kW - Voltage: 400 V / 50 Hz - Applications: ideal for cutting carbon steel, stainless steel, etc. - Including follow-up fume extraction system: automatically opens extraction flap when the laser head is operating and closes again after work is completed - Full safety enclosure with modern industrial design - Integrated interior camera for real-time monitoring - Interior LED lighting for machine maintenance - Integrated double-deck fume extraction system on the left interior side, rear, and underside - Double exchange table for increased material handling efficiency - Dimensions: L=8,900 mm, W=3,700 mm, H=2,500 mm - Weight: 8,300 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH) 8900 x 3700 x 2500 mm Weight: 8,300 kg Total Power Requirement: 11 kW Fiber Laser Cutting System FL-3015 4000W M3 DELUXE - Working area: 3,000 mm x 1,500 mm - Additional attachment for tube processing up to 6 m - Round tube diameter: 20 to 200 mm - Square tube side length: 20 to 140 mm - Fiber laser power: 4,000 W, Raycus type - Laser wavelength: 1070 nm - Maximum sheet cutting thickness: 16 mm carbon steel = 10 mm stainless steel = 10 mm aluminum = 8 mm brass = 5 mm copper = 10 mm galvanized sheet - Maximum tube cutting thickness: 14 mm carbon steel = 8 mm stainless steel = 8 mm aluminum = 8 mm galvanized sheet - Laser module lifespan: over 100,000 hours, averaging 11.5 years - X-axis travel: 3,000 mm - Y-axis travel: 1,500 mm - Z-axis travel: 100 mm - Drive motors: FUJI AC servo motors - Travel system (X & Y axis): rack and pinion drive - Linear guides - Positioning accuracy: ± 0.1 mm/m - Repeatability: ± 0.08 mm - Max. acceleration X/Y-axis: 0.6G - Max. movement speed: 60 m/min - Controller: Au3tech - Positioning with red dot pointer - Autofocus - Power consumption: 11 kW - Voltage: 400 V / 50 Hz - Application: ideal for cutting carbon steel, stainless steel, etc. - Includes follow-up fume extraction system, which opens the fume extraction flap when the laser head is operating and closes automatically after work is completed - Full safety enclosure with modern industrial design - Integrated interior camera for real-time monitoring - LED light inside for machine maintenance - Integrated double-deck extraction system inside (left, rear, and bottom) - Dual worktable for higher material handling efficiency - Dimensions: L = 8,900 mm, W = 3,700 mm, H = 2,500 mm Gkjdpfevz Hccex Aazoa - Weight: 8,300 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 8421x2250x2250 mm Weight: 5500 kg Total Power Requirement: 25 kW Fiber Laser Cutting Machine FL-3015 3000W DELUXE - Working area: 3000 mm x 1500 mm - Fiber laser power: 3000 W, Raycus type - Laser wavelength: 1070 nm - Cutting depths: up to 14 mm carbon steel up to 8 mm stainless steel up to 8 mm aluminium up to 8 mm brass up to 5 mm copper up to 8 mm galvanized sheet - Laser module lifespan: over 100,000 hours (average 11.5 years) - X-axis travel: 3000 mm Gedpfjvz Hd Tox Aazjka - Y-axis travel: 1500 mm - Z-axis travel: 100 mm - Drive motors: FUJI AC servo motors - X & Y axis drive system: rack and pinion - Linear guideways - Positioning accuracy: ± 0.1 mm/m - Repeatability: ± 0.08 mm - Max acceleration X/Y axis: 0.6G - Max movement speed: 60 m/min - Control system: Au3tech - Red dot positioning - Power consumption: 25 kW - Voltage: 400 V / 50 Hz - Application: ideal for cutting carbon steel, stainless steel, etc. - Includes automatic follow-up fume extraction system that opens the extraction flap when the laser head is operating and closes automatically after work - Full safety enclosure with modern industrial design - Integrated camera inside for real-time monitoring - Interior LED lighting for machine maintenance - Integrated double-level fume extraction units on the left interior, rear, and underneath - Double worktable for improved material handling efficiency - Dimensions: L=8421 mm, W=2250 mm, H=2250 mm - Weight: 5500 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 8,900 x 3,700 x 2,500 mm Weight: 8,300 kg Total power requirement: 11 kW Fiber Laser Cutting System FL-3015 1500W M3 DELUXE - Working area: 3,000 mm x 1,500 mm - Additional device for tube processing up to 6 m - Round tube diameter: 20 to 200 mm - Square tube side length: 20 to 140 mm - Fiber laser power: 1,500 W, Raycus type - Laser wavelength: 1070 nm - Maximum cutting thickness for sheet materials: = 10 mm carbon steel = 5 mm stainless steel = 5 mm aluminium = 4 mm brass = 3 mm copper = 5 mm galvanized sheet Gkedpfxovz E E Ne Aazea - Maximum cutting thickness for tube processing: = 8 mm carbon steel = 4 mm stainless steel = 4 mm aluminium = 4 mm galvanized sheet - Laser module service life: more than 100,000 hours, average 11.5 years - X-axis travel: 3,000 mm - Y-axis travel: 1,500 mm - Z-axis travel: 300 mm - Travel motors: AC servo motors by FUJI - Travel system (X & Y-axis): rack and pinion drive - Linear guides - Positioning accuracy: ± 0.1 mm/m - Repeatability: ± 0.08 mm - Max. acceleration X / Y-axis: 0.6G - Max. movement speed: 60 m/min - Control: Au3tech - Autofocus - Red dot positioning - Power consumption: 11 kW - Voltage: 400 V / 50 Hz - Application: ideally suited for cutting carbon steel, stainless steel, etc. - Includes follow-up fume extraction system: the fume extraction flap opens automatically when the laser head is in operation and closes automatically once finished - Integrated internal camera for real-time monitoring - LED light in the interior for maintenance purposes - Integrated double-deck exhaust system on the left, rear, and underside of the interior - Double worktable for increased efficiency during material loading - Dimensions: L = 8,900 mm, W = 3,700 mm, H = 2,500 mm - Weight: 8,300 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 8421 x 2250 x 2250 mm Weight: 5500 kg Total power requirement: 11 kW Fiber Laser Cutting System FL-3015 1500W DELUXE - Working area: 3000 mm x 1500 mm - Fiber laser power: 1500 W Raycus type - Laser wavelength: 1070 nm - Cutting depth: up to 10 mm carbon steel up to 5 mm stainless steel up to 5 mm aluminium up to 4 mm brass up to 3 mm copper up to 5 mm galvanized sheet metal - Laser module lifetime over 100,000 hours (approx. 11.5 years) - X-axis travel: 3000 mm - Y-axis travel: 1500 mm - Z-axis travel: 100 mm - Travel motors: AC servo motors by FUJI - Drive system (X & Y axis): rack and pinion - Linear guides - Positioning accuracy: ± 0.1 mm/m - Repeatability: ± 0.08 mm - Max. acceleration X/Y-axis: 0.6G - Max. traverse speed: 60 m/min - CNC controller: Au3tech - Red dot positioning Gsdpfx Aajvz Hazozjka - Power consumption: 11 kW - Voltage: 400 V / 50 Hz - Application: ideal for cutting carbon steel, stainless steel, etc. - Includes follow-up fume extraction system; the extraction flap opens when the laser head is in operation and automatically closes afterwards - Full safety enclosure with modern industrial design - Integrated interior camera for real-time monitoring - LED lighting inside for machine maintenance - Integrated double-deck fume extraction system on the left inside, rear and underneath - Dual shuttle table for increased efficiency in material handling - Overall dimensions: L = 8421 mm, W = 2250 mm, H = 2250 mm - Weight: 5500 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H): 8421 x 2250 x 2250 mm Weight: 5,500 kg Total power requirement: 17 kW Fiber Laser Cutting System FL-3015 2000W DELUXE - Working area: 3000 mm x 1500 mm - Fiber laser power: 2000 W, Raycus type - Laser wavelength: 1070 nm - Cutting depth: up to 12 mm carbon steel, 6 mm stainless steel, 6 mm aluminum, 6 mm brass, 4 mm copper, 6 mm galvanized sheet - Laser module service life: more than 100,000 hours (average 11.5 years) - X-axis travel: 3000 mm - Y-axis travel: 1500 mm - Z-axis travel: 100 mm - Drive motors: AC servo motors by FUJI - Travel system (X & Y axis): rack and pinion drive - Linear guides - Positioning accuracy: ±0.1 mm/m - Repeatability: ±0.08 mm - Max. acceleration (X/Y axis): 0.6 G - Max. travel speed: 60 m/min - Control: Au3tech - Red-dot positioning system - Power consumption: 17 kW - Voltage: 400 V / 50 Hz - Suitable for cutting carbon steel, stainless steel, etc. - Includes follow-up smoke extraction system: automatically opens extraction flap when the laser head is operating, and closes after machining Gkedpfxovz E Hyj Aazea - Full protective enclosure featuring modern industrial design - Integrated interior camera for real-time monitoring - Interior LED lighting for machine maintenance - Integrated double-level smoke extraction system (left side, rear, and bottom) - Dual shuttle table for more efficient material handling - Dimensions: L = 8421 mm, W = 2250 mm, H = 2250 mm - Weight: 5,500 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH) 2200x2600x1800 mm Weight: 2000 kg Total power requirement: 9 kW Fiber Laser Cutting Machine FL-1313 1000W - Working area: 1300 mm x 1300 mm - Fiber laser power: 1000 W, Raycus type - Laser wavelength: 1070 nm - Cutting depth: up to 12 mm carbon steel, 5 mm stainless steel, 3 mm aluminium, 1 mm brass - Laser module service life: more than 100,000 hours, approx. 11.5 years - X-axis travel: 1300 mm - Y-axis travel: 1300 mm - Z-axis travel: 100 mm - Travel motors: AC servo motors by FUJI - Drive system (X & Y axis): rack and pinion drive - Linear guides - Positioning accuracy: ± 0.05 mm/m - Repeatability: ± 0.03 mm - Max. acceleration X/Y-axis: 0.6G - Max. movement speed: 60 m/min - Control system: Au3tech - Positioning via red dot - Power consumption: 9 kW - Voltage: 400 V / 50 Hz - Application: ideal for cutting carbon steel, stainless steel, aluminium, etc. - Dimensions: 2200 mm x 2600 mm x 1800 mm Gjdsvz E Iwopfx Aazska - Weight: 2000 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH): 2200 x 2600 x 1800 mm Weight: 2000 kg Total power requirement: 9 kW Fiber Laser Cutting Machine FL-1313 750W - Working area: 1300 mm x 1300 mm - Fiber laser power: 750 W Raycus type - Laser wavelength: 1070 nm - Cutting thickness: up to 6 mm carbon steel, up to 3 mm stainless steel - Laser module service life: over 100,000 hours (approx. 11.5 years) - X-axis travel: 1300 mm - Y-axis travel: 1300 mm Godpfx Aovz E T Teazjka - Z-axis travel: 100 mm - Travel motors: FUJI AC servo motors - Drive system (X & Y axis): rack and pinion drive - Linear guides - Positioning accuracy: ±0.05 mm/m - Repeatability: ±0.03 mm - Max. acceleration (X/Y-axis): 0.6G - Max. movement speed: 60 m/min - Controller: Au3tech - Positioning with red dot pointer - Power consumption: 9 kW - Voltage: 400 V / 50 Hz - Application: ideal for cutting carbon steel, stainless steel, etc. - Dimensions: 2200 mm x 2600 mm x 1800 mm - Weight: 2000 kg

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, fr-1 Gkedpfxoh Ad E He Aazsa

Tahun pembuatan: 2019, Kondisi: hampir baru (bekas), de-Laser-Schweißroboteranlage für das Schweißen von Stahl und Edelstahl.\nLieferumfang:\n1 x YASKAWA 6-Achs-Roboter YASKAWA HP20D (Traglast: 20 kg, Reichweite: 1717 mm, Robotermasse: 280 kg, Bj. 2009.01)\n1 x YASKAWA DX100 Steuerung (Bj. 2009.02)\n1 x LASERLINE LDM 1200-60 Diodenlaser, 1320 W (Bj. 2015.10)\n1 x LASERLINE Laserschweißkopf OTS-5 mit Crossjet und Kamera (Bj. 2017.12)\n1 x HYFRA Sigma7 Zweikreis-Kühlanlage für Laser und Optik (Bj. 2018)\n1 x Siegmund-Tisch 1200x800 (Bj. 2019)\n\nDie Anlage kann besichtigt werden.\nSehr guter Zustand. Angeschlossen und vorführbereit.\nDer Versand in EU-Länder erfolgt durch uns, die Versandkosten sind kostenlos. Godpfx Aeh Aiy Sjazoka

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: xxxxx, gebr-cieffe-waschmaschine Gsdpoqtyxksfx Aazeka

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, -Robot Yaskawa GP50 mit YRC1000 Steuerung -Laserline LDF6000-60 Leistungseinheit; • Maximale Dauerstrichleistung 6000W • Ausgesendeter Lichtwellenlängenbereich 900-1070nm • Luft-Wasser-Kühlung mit 6kW Kühlleistung (Kühlgerät inkludiert) • Optische Faser: 600μm Durchmesser, 20m Länge • Ringspalt-Laserbeschichtungsdüse, wasserkühlbare Arbeitsoptik OTZ-5 • COAX-8 Typ. Die genannte Optik verfügt über einen Zoom-Mechanismus. • Fokuspunkttiefe stufenlos von 2,28 mm bis 7,32 mm einstellbar • Optik mit angebauter CMOS-Kamera zur Prozessüberwachung • Wasserkühlbare Seitenplatte, auf der OTZ-5 Beschichtungsdüse montierbar -PF2/2 Pulverförderer: • Elektronische Steuerung • Fernsteuerung über Robotersteuerung • 2 Kammern mit je 5 Liter Fassungsvermögen • Heizfunktion -Schlitten: • Für Y-Achsenbewegung der Robotereinheit Gedpfxsrwwzyj Aazeka • Linearbewegung passend für den Bearbeitungsprozess • 1 x Yaskawa-Servomotor • 1 x Linearführung (6m), Zahnstangenantrieb • Wird automatisch durch den tragenden Roboter gesteuert -Zwei-Achsen-Positionierer: • Max. 5.000 kg Tragfähigkeit • Drehachse Servo mit Yaskawa-Roboter und synchroner Bewegung • Kippachse Servomotor mit Indexsteuerung • Schwenkbereich der Kippachse +/- 90° • Drehbereich Drehachse +/- 360° • Max. Produktdurchmesser 800mm, max. Produktgewicht 8 Tonnen • Einachsiger Betrieb mit hydraulischem Reitstock: max. 8 Tonnen Tragkraft • Bei Nutzung als Zwei-Achsen-Positionierer: max. 3 Tonnen Tragkraft -5T Reitstock: • Max. 5.000 kg Tragfähigkeit • Hydraulisch -Zwei-Achsen-Positionierer 5T Unterstützung: • 4 m lange Schienenbasis für Zylinderunterstützung • 1 x 5-Tonnen-Rollenunterstützung • Für Durchmesser von 200 mm bis 800 mm geeignet und einstellbar • Maximale Last 5.000 kg

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Connection: 3.55 kW / 230 V / 50 Hz External dimensions W x D x H: 945 x 830 x 1025 mm External dimensions W x D x H (open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Usable height: 380 mm Pump pressure: 2.2 bar Spray rate: 4,200 l/h Load capacity: 100 kg The soiled items to be cleaned are placed in the rotating wash basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the washing solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump assemblies draw the washing solution from the wash tank and distribute it through 6 stainless steel spray pipes equipped with overlapping flat spray nozzles. The items being cleaned are intensively sprayed from all sides with the hot solution during the consistent rotation of the basket, which is driven by the spray jets. After the cleaning process is complete, the unit switches off automatically. Gsdoxiwc Sjpfx Aazjka Advantages 1 horizontally mounted pump Flow rate: 70 L/min 3 three-dimensional spray pipes made of stainless steel robust stainless steel design additional stainless steel small parts cleaning basket (Ø 170 mm) rotating stainless steel wash basket, water jet driven steam extraction stainless steel perforated sheet with filter inlets above the wash tank low water level safety device

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (LxWxH) 2985 x 2160 x 2000 mm Weight 2000 kg Total connected load 30 kW Fiber Laser Cutting System FL-1313 1500W - Working area: 1300 mm x 1300 mm - Fiber laser power: 1500 W, model RFL-C1500W - Laser wavelength: 1070 nm - Cutting depth: up to 16 mm carbon steel      up to 6 mm stainless steel      up to 6 mm aluminium Gkedpfx Aajvz E Nzozsa      up to 3 mm brass - Laser module service life: over 100,000 hours (approx. 11.5 years) - X-axis travel: 1300 mm - Y-axis travel: 1300 mm - Z-axis travel: 100 mm - Servo drives: AC servo motors from FUJI - Traverse system (X & Y axis): rack and pinion drive - Linear guides - Positioning accuracy: ± 0.05 mm/m - Repeatability: ± 0.02 mm - Maximum X/Y-axis acceleration: 0.6G - Maximum movement speed: 80 m/min - Maximum table load: 300 kg - CNC control: CypCut - Red dot positioning - Power consumption: 30 kW - Voltage: 400 V / 50 Hz - Applications: ideally suited for cutting carbon steel, stainless steel, aluminium, etc. - Including exhaust fan - Dimensions: 2985 mm x 2160 mm x 2000 mm - Weight: 2000 kg