Beli Stasiun Perakitan bekas (951)

Kondisi: bekas, Rotary indexing table, rotary transfer table with 16 stations Rotary indexing automation + TOX hydraulic press Special-purpose rotary indexing machine with multiple assembly/configuration stations Production and assembly system with rotary indexing operation From special-purpose machine manufacturer "AKE-technologies GmbH" Cedpfxsgd D U Ee Ag Djgt Serial number: Order number: 11111 Year of manufacture: 2012 - Large WEISS rotary indexing table, type TC500, with 16 stations - Press station with TOX power package - Vibratory bowl feeder - Conveyor belts - Inspection stations - Some stations shown in the pictures have already been disassembled Required space (L x W x H) approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg Everything in as-new condition – The system was never used in serial production.

Kondisi: bekas, Pneumatic press, compressed air press BOSCH type Serial no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 mm Ram diameter: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force continuously adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic two-hand control - Mounted on metal base frame with wooden plates Codeh U Dtuepfx Ag Dsgt Space requirement (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Total weight with table base: 140 kg In good condition

Kondisi: bekas, 1 Cgedpfx Aoi Aqgtog Dot

Kondisi: bekas, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right & left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center partition): approx. 2000 x 950 mm - Table size of fixture-changing plate for welding jig setup: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Freestanding control cabinet with teach-in operating panel (weight approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control: YZNC-OP186 - Teach panel: JZNC-T834B - Robot: YRFL-NNA06WB - Automation unit by ECKHARDT type ROBO Robot payload: 6 kg Net weight (robot only): 180 kg The entire system is configured as a compact welding cell. Robot control cabinet positioned adjacently. The robot can, of course, also be equipped with a MIG-MAG welding power source. Cgedpfxowypqlj Ag Det Space requirement for welding cell with robot (L x W x H): 2000 x 2000 x 2300 mm Weight of welding cell with robot: 1055 kg Space requirement for control and control cabinet (L x W x H): 1000 x 850 x 1600 mm Weight of control and control cabinet: 300 kg Overall space requirement of the system (L x W): approx. 3000 x 3000 mm Net weight of the complete system: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Kondisi: bekas, Clamping plate with T-slots made of cast iron Base plate from a radial drilling machine Assembly table, assembly station, base plate for pillar slewing crane Length: 1850 mm Width: 915 mm Csdpfx Aeh R D Uzeg Dogt Plate thickness: 230 mm Table surface with T-slots: 1030 x 750 mm - Clamping surface with 22 mm T-slots, spacing = 250 mm - Top surface milled parallel to the underside = clamping surface - Milled underside; also the ribs rest flatly and provide support - Ideal as a base plate Net weight: 1140 kg Good condition

Kondisi: bekas, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Model: Handy-flex 200 Horizontal travel: 450 mm Vertical travel: 600 mm Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp Cgjdjfgpfmepfx Ag Det - Moves along three axes (horizontal, vertical, rotatable) - Rotary encoder KÜBLER for rotational movement, model 8.5873.5320.B311.S003 - Linear position transducer BALLUFF for horizontal movement, model BTL6-A110-M0450-A1-S115 - 2 units balancers for vertical movement CP DESOUTTER, model 10 D, adjustment range 2 to 5 kg per balancer - For suspension of small devices in zero gravity - Stepwise adjustable load capacity - Constant pulling force Required space (L x W x H): 770 x 310 x 1200 mm Net weight: 19 kg Good condition

Kondisi: bekas, Test bench, test station, measuring station, test device, measuring instrument, tester for HV, PE, and insulation measurement ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High Voltage Test Device The PE/IS/HV SCT 42 / 91-3J.3 is used for measuring dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The unit 90-1V supplies a highly stable DC voltage with low ripple. One output pole carries the high voltage, the other output pole is near earth potential and can be set to a maximum of 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Csdpfx Asf Axn Asg Degt Interference suppression according to VDE 0871 Rated power: 14 Watt Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connector unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as pictured Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices available under stock numbers 57819, 57820, and 57821.

Kondisi: bekas, Clamping plate, machine table with metal base Clamping table, assembly table, angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The slotted table was originally a machine table from a milling machine - 4 pcs. T-slots, 16 mm - Metal base with height-adjustable feet Codpfx Agswkvi No Dsgt - Multi-ply wood panel L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg Good condition

Kondisi: bekas, Control panel, test station, measurement station, test device, measuring instrument, tester for HV, PE, IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage tester The device PE/IS/HV / 91-3J.3 is designed for testing dielectric strength, insulation resistance, and protective earth voltage drop measurements in accordance with VDE 0113 and IEC regulations per EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The device SHV 16 / 90-1V.3 delivers a highly stable DC voltage with low ripple. One output terminal supplies high voltage, the other output terminal is near ground and can be set to a maximum potential of 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 Watts Cgedpfxsd Dc Uno Ag Dst Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact device assembly on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many more ELABO devices under stock numbers 57820 and 57821

Kondisi: baru, DOPAG Micromix Cedoxcgpzepfx Ag Degt Perangkat dalam seri micromix adalah alat pengukur dan pencampur yang ringkas dan bebas pelarut dengan penggerak pneumatik dan pompa piston. Digunakan untuk memproses media multikomponen dengan viskositas rendah hingga tinggi berbasis, misalnya, epoksi, poliuretan, dan silikon dalam rasio pencampuran 100:100 hingga 100:4 secara jet atau mode kontinu. Bahan-bahannya bisa bersifat abrasif maupun terisi.

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0319, gaya penekanan: 125 t, Tryout Press – Manufacturer Calende – 125 t Assembly Press For sale is a tryout press from Calende with a maximum pressing force of 125 t. The machine is equipped with both bolster and ram platens measuring 1,300 × 600 mm, a maximum working height of 700 mm, and is specially designed for tool adjustment, assembly, and tryout tasks in tool and mold making. ==== Technical Data & Information: Calende Tryout Press – Assembly Press ==== General Information - Manufacturer: Calende - Model: Tryout Press - Design: Assembly Press / Tryout Press - Pressing Force: 125 t - Machine Weight: approx. 6 t - Dimensions (L × W × H): 2,540 × 933 × 3,000 mm ==== Working Area - Clearance Width: 1,000 mm - Stroke: 500 mm - Max. Working Height: 700 mm - Table Height above Floor: approx. 850 mm ==== Bolster and Ram - Bolster Plate: 1,300 × 600 mm - Ram Plate: 1,300 × 600 mm - Column Diameter: 120 mm ==== Forces - Return Force: 12 t ==== Speeds - Approach Speed: 10 mm/s - Pressing Speed: 10 mm/s - Fast Advance Speed: 10 mm/s - Return Speed: 25 mm/s ==== Hydraulics - Motor Power: 11 kW - Oil Tank Capacity: 250 l - Electric Oil Cooling: 1.5 kW ===== Cjdpefxykpofx Ag Dogt Tool adjustment, tryout, tool assembly, mold making, tool manufacturing, press tool validation, tryout operations Tryout press, tool tryout press, assembly press, tool try out press, hydraulic press, tool test press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are built according to German machinery directives, European Machinery Directive (Directive 2006/42/EC), EC and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements by fully meeting the Brazilian national safety standard NR 12, which is based on these directives. Our strongest asset is special machine construction and press automation. We offer customized hydraulic presses at surprisingly attractive prices. For the hydraulic systems of our presses, we predominantly use components from leading European manufacturers.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2018, gaya penekanan: 110 t, For sale is a tool tryout press manufactured by Calende with a maximum pressing force of 110 t. The machine features a table and ram size of 1,990 × 1,000 mm each, a maximum working height of 1,000 mm, and is particularly suited for die tuning, assembly, and tryout operations in tool and mould making. ==== Technical Data & Information: Tool Tryout Press Calende – Assembly Press ==== General Information - Manufacturer: Calende - Model: Tool Tryout Press - Design: Assembly Press / Tool Tryout Press - Pressing Force: 110 t - Machine Weight: approx. 11 t - Total Power Requirement: 15 kW - Dimensions (L × W × H): approx. 2,640 × 3,200 × 3,650 mm ==== Working Area - Passage Width: 1,500 mm - Max. Working Height: 1,000 mm - Stroke / Ram Travel: 650 mm - Table Height above Floor: approx. 800 mm ==== Table and Ram - Table Size: 1,990 × 1,000 mm - Ram Size: 1,990 × 1,000 mm - Column Diameter: 120 mm ==== Forces - Return Force: 11 t ==== Speeds - Advance Speed: 10 mm/s Cedpfxjfhcc Te Ag Djgt - Pressing Speed: 10 mm/s ==== Hydraulics - Oil Tank: 200 l - Electric Oil Cooling: 1.5 kW ==== Die tuning, tool tryout, tool assembly, mould making, tool manufacturing, press tool testing, tryout operations Tool tryout press, tryout press, die tuning press, tool tryout press, assembly press, tryout press, tool testing press, hydraulic press Looking for a hydraulic press tailored to your application? Contact us for a customised offer. Our hydraulic presses are built in accordance with German Machinery Directive and European Machinery Directive (Directive 2006/42/EC), EC norms, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our greatest strength lies in custom machine construction and press automation. We offer customised hydraulic presses at surprisingly competitive prices. For the hydraulics, we predominantly use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2018, nomor mesin/kendaraan: DF0199 - Rev.00, gaya penekanan: 160 t, Tool Tryout Press – Manufacturer Calende – 160 t Assembly Press For sale is a tool tryout press from Calende with a maximum pressing force of 160 t. The machine features a bolster and ram plate of 1,670 × 800 mm each, a maximum working height of 800 mm and is particularly suited for die tuning, assembly, and tryout tasks in tool and mold making. ==== Technical Specifications + Information: Tool Tryout Press Calende – Assembly Press ==== General Details - Manufacturer: Calende - Model: Tryout Press - Design: Assembly Press / Tool Tryout Press - Press force: 160 t - Machine weight: approx. 7 t - Dimensions (L × W × H): approx. 2,400 × 1,400 × 3,400 mm ==== Working Area - Clearance width: 1,200 mm - Max. working height: 800 mm - Stroke / Travel: 600 mm - Table height above floor: approx. 800 mm ==== Bolster and Ram - Bolster plate: 1,670 × 800 mm - Ram plate: 1,670 × 800 mm ==== Forces - Return force: 16 t ==== Speeds - Advance speed: 10 mm/s - Pressing phase speed: 10 mm/s - Return speed: 25 mm/s ==== Hydraulics - Motor power: 18 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ===== Die tuning, tool tryout, assembly, moldmaking, toolmaking, press tool inspection, tryout operations Cgedpedxvfhefx Ag Djt Tryout Press, Tool Tryout Press, Die Tuning Press, Assembly Press, Tryout Press, Tool Testing Press, Hydraulic Press Are you looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are built in accordance with German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they also comply in every respect with the Brazilian national safety standard NR 12, which is based on these regulations. Our core strength lies in special machine construction and press automation. We offer customized hydraulic presses at surprisingly competitive prices. For the hydraulic systems, we primarily use components from leading European manufacturers.

Kondisi: bekas, Transfer unit, roller conveyor, roller track, powered roller conveyor, roller path, roller track with stripper conveyor, transfer station -Transfer station: 1x roller conveyor with conveyor belt, 1x conveyor belt -Base frame: robust, height-adjustable base frame -Speed: roller conveyor 20 m/min / conveyor belt 23 m/min -Roller conveyor: conveyor rollers Ø63 x 2500 mm, conveyor belt 17 x 2815 mm Cgodpfxorv Av Ie Ag Djt -Conveyor belt: 6 belts 17 x 2830 mm -Drive/gearbox: Nord, see type plates in the photos -Transport dimensions: 2810/1660/H870 mm / 2900/920/H870 mm -Weight: 569 kg / 258 kg

Kondisi: baik (bekas), Transfer station, roller conveyor, roller track, powered roller conveyor, rollerway, roller track with strip feeder, transfer unit - Transfer unit: Roller conveyor with conveyor belt, sturdy height-adjustable base frame - Speed: Roller conveyor 51 m/min / conveyor belt 45 m/min - Conveyor rollers: Ø86 x 1415 mm, rollers rubber-coated - Roller pitch/axle spacing: 205 mm - Belt spacing: 200 mm - Conveyor belt length: approx. 2290 mm, dimensions see photo (technical drawing) - Drive/gearbox: 2x Nord, see photos of nameplates Csdsrrzfgepfx Ag Dsgt - Lifting: hydraulic, without power pack - Transport dimensions: 2480/2380/H810 mm - Weight: 1180 kg

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Retraktor EV Pneumatico z automatycznym zwijaniem kabla / Uchwyt do przewodu ładowania Retraktor EV marki Pneumatico to innowacyjny uchwyt z automatycznym zwijaniem przewodu, który rewolucjonizuje proces ładowania pojazdów elektrycznych. Dzięki tej konstrukcji nie tylko ładowanie pojazdu, ale również zachowanie porządku jest wyjątkowo łatwe. Zwijarka dostępna jest w 4 wariantach o różnych udźwigach: EV0, EV1, EV2, EV3. Do czego stosowany jest Pneumatico Retraktor EV? Retraktor EV służy do obsługi przewodu ładującego pojazdu elektrycznego. Obudowa retraktora wykonana jest z ocynkowanej stali, co zapewnia odporność na warunki atmosferyczne. Mechanizm obraca się o 180 stopni, ułatwiając manipulację przewodem. Nowoczesny design oraz powłoka proszkowa gwarantują estetyczny wygląd. Lina retraktora ma długość do 300 cm i wykonana jest ze specjalnych, wysokowytrzymałych włókien Dyneema, które nie uszkadzają karoserii. Na końcu liny znajduje się obrotowy uchwyt, który zapobiega skręcaniu przewodu. Siłę zwijania można regulować za pomocą klucza. Montaż urządzenia jest szybki i prosty. Zawieszony przewód pozostaje zawsze czysty, podobnie jak ręce operatora. Dostępne udźwigi: od 1,00 kg do 8,00 kg (w zależności od wybranej wersji). Czy Pneumatico EV Retraktor pasuje do każdego przewodu ładowania? Tak. Standardowy zakres średnic przewodów wynosi od 16,5 do 32 mm, a udźwig retraktora to 1,00–8,00 kg. Jeżeli średnica przewodu odbiega od standardu, wykonujemy uchwyt o wymaganej średnicy oraz stosujemy retraktor o wyższym udźwigu. Retraktor EV Pneumatico to idealne rozwiązanie do użytku prywatnego i komercyjnego. Pneumatico Retraktory kablowe – seria EV (EV0 / EV1 / EV2 / EV3) Csdjygv Dkepfx Ag Dogt Oferujemy sprężynowe retraktory Pneumatico o różnych zakresach udźwigu – idealne do zastosowań przemysłowych przy prowadzeniu przewodów i odciążaniu narzędzi. Udźwig / modele: EV0: 1–2,5 kg EV1: 2–4 kg EV2: 4–6 kg EV3: 6–8 kg Średnice przewodów (dostępne dla wszystkich modeli EV): 16,5–18,5 mm 19–20 mm 21–22 mm 22,5–24 mm 24,5–26 mm 26,5–28 mm 28,5–30 mm 30,5–32 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2009, jarak pergerakan sumbu X: 525 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, lebar meja: 650 mm, For sale are 2 EDM machines from OPS Ingersoll, model Gentry Eagle 500 The machines are being sold from a production facility, are in very good condition, and are fully operational. Technical data: Year of manufacture: 2009 Operating hours: approx. 30,758 Available from: by arrangement Travel distances: X-axis: 525 mm Y-axis: 400 mm Z-axis: 450 mm (430 mm to Erowa) C-axis controlled (0.001 mm resolution) Electrode holder (spindle): Erowa ITS Work tank: 770 mm x 670 mm x 440 mm Table: 750 mm x 650 mm Accuracy: 0.005 mm to 0.015 mm Max. dielectric height: 395 mm Max. pallet size: 750 x 950 x 420 mm Max. workpiece weight: 1,000 kg Max. electrode weight: 100 / 50 / 15 kg Max. throat depth: 585 mm Equipment: - Filter system with 16 m² paper cartridge - Compressor - Recooling unit - Lowerable lift tank with automatic tank replenishment (ATA) Cgsdpexrpm Uofx Ag Dst - CO2 fire extinguishing system Machine weight: 3,640 kg (incl. generator and control panel) Operating weight: 6,450 kg (ready for operation) Space requirements: 3,135 x 3,944 x 2,871 mm Options: - 4-position Power-Grip160 pallet carrier (not included in the price) - Various 4-position aluminum change pallets with chip - Various Erowa ITS electrode holders with chip Transport and loading can be organized Europe-wide at an additional charge upon request. Prices excl. VAT Inspection available by appointment. Contact us – our team is happy to assist you. Trade-in or exchange possible! Machine purchase / sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINERY AND MORE Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit our website.

Kondisi: baru, Tahun pembuatan: 2021, gaya penekanan: 10 t, Single-column press – Manufacturer: Hidrobrasil – 10 t assembly press – table 600 × 300 mm For sale is a compact hydraulic single-column press (C-frame design) from Hidrobrasil with a pressing force of up to 10 t. The machine is designed for continuous operation and is ideally suited for assembly, pressing-in, and light forming operations in workshop and production environments. ==== Technical data & information: Hydraulic single-column press – 10 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press / Assembly Press - Design: C-Frame Press / Single-Column Press - Pressing force: max. 10 t (100 kN) - Pressure range: 0.5 – 10 t adjustable - Machine weight: approx. 1.6 t - Dimensions (L × W × H): approx. 1,100 × 600 × 2,850 mm - Table height: 850 mm - Operating sides: 1 ==== Working Area - Max. opening width: 800 mm - Stroke: 500 mm - Minimum opening: 300 mm ==== Table & Ram - Table plate: 600 × 300 mm - Ram plate: 300 × 300 mm - Design: with T-slots and central cylinder clamping ==== Speeds - Approach speed: 0 – 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Operating pressure: max. 250 bar Cjdpfehma Smox Ag Djgt - Pump: Gear pump, approx. 6 l/min - Oil capacity: approx. 80 l (HLP 46) - Oil temperature: max. 55 °C - Ambient temperature: max. 40 °C ==== Drive & Electrics - Motor power: 2.2 kW - Total connected load: approx. 3 kW - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Pressure adjustment via rotary knob - Cable remote control for up and down movement - Oil temperature display - Control cabinet supply: 3,000 mm cable with 16 A plug - Machine body powder-coated / double lacquered ==== Construction & Safety - Designed as an oil-hydraulic single-column press - Complies with current UVV and EU directives ==== Assembly work, press-fit operations, small batch production, workshop applications, light forming technology Single-column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, die set-up press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual quotation. Our hydraulic presses are manufactured according to the German Machinery Directive as well as European machinery directives (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements since they comply fully with the Brazilian national safety guideline NR 12, which is based on these standards. Our major strengths are custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly competitive prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2021, gaya penekanan: 10 t, Single Column Press – Manufacturer Hidrobrasil – 10 t Assembly Press – Table 600 × 300 mm For sale is a hydraulic single column press (C-frame) from Hidrobrasil with a pressing force of up to 10 t. The machine is designed for continuous operation and stands out due to its robust construction, reliable hydraulic components, and versatile application options for assembly and pressing processes. ===== Technical Data & Information: Hydraulic Single Column Press – 10 t ==== General Information - Manufacturer: Hidrobrasil Csdpshaqygsfx Ag Djgt - Model: Single Column Press / Assembly Press - Design: C-Frame Press / Single Column Press - Pressing force: max. 10 t (100 kN) - Machine weight: approx. 1.2 t - Dimensions (L × W × H): approx. 1,100 × 600 × 1,850 mm - Table height: 850 mm - Operator sides: 1 ==== Working Range - Max. opening width: 400 mm - Stroke: 350 mm ==== Table & Ram - Table plate: 600 × 300 mm - Ram plate: 300 × 300 mm - Design: with T-slots and central cylinder clamping ==== Speeds - Approach speed: 0 – 10 mm/s - Return speed: up to 25 mm/s - Pressing speed: 0 – 10 mm/s ==== Hydraulics - Number of cylinders: 1 - Operating pressure: max. 250 bar - Pressure accuracy: ± 5 bar - Pump: Gear pump, approx. 6 l/min - Oil volume: approx. 80 l (HLP 46) ==== Drive & Electrics - Motor power: 2.2 kW - Total connected load: approx. 3 kW - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz ==== Equipment & Operation - Pressure adjustment via rotary knob (0.5 – 10 t) - Cable remote control for up and down movement - Oil temperature display - Control cabinet supply: 3,000 mm cable with 16 A plug - Machine body powder-coated / double lacquered ==== Control & Components - Control system: Siemens - Hydraulic components: Bosch Rexroth ==== Construction & Safety - Robust machine body according to DIN 8651 - Cylinder induction-hardened and chrome-plated - CE certificate available - Documentation in German - Low-maintenance and reliable - Compliant with current EU directives ===== Assembly work, pressing operations, small series production, workshop applications, light forming technology Single column press, C-frame press, hydraulic press, workshop press, assembly press, industrial press, tool testing press, tryout press, tool tryout press Are you looking for a hydraulic press tailored to your requirements? Contact us for a customised offer. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. In addition, our presses surpass Canadian and European safety requirements, as they fully comply with the national Brazilian safety directive NR 12, which is based on these standards. Our great strength lies in custom machine construction and press automation. We offer tailored hydraulic presses at surprisingly competitive prices. Our presses predominantly use components from leading European manufacturers for the hydraulics.

Kondisi: baru, Tahun pembuatan: 2025, gaya penekanan: 20 t, Straightening Press – Manufacturer Durendus – DCS-20 – 5–20 t C-Frame Single-Column Press – Table 500 × 600 mm For sale: a compact single-column straightening press (C-frame) from the manufacturer Durendus, model DCS-20, featuring an adjustable pressing force from 5 to 20 t. The machine is equipped with a table size of 500 × 600 mm, a maximum installation height of 700 mm, and boasts a robust, low-maintenance design, making it ideal for straightening, assembly, and press-fitting tasks. ==== Technical Data & Information: Straightening Press Durendus DCS-20 – 5–20 t Single-Column Press ==== General Information - Manufacturer: Durendus - Model: DCS-20 - Design: Single-column press / C-frame - Pressing force: 5 – 20 t (adjustable) - Machine weight: approx. 1,900 kg - Dimensions (W × D × H): 1,150 × 1,250 × 2,469 mm ==== Working Area - Installation height: max. 700 mm - Stroke: 0 – 500 mm (adjustable) - Table height: 800 mm ==== Table and Ram - Table size: 500 × 600 mm - Ram size: 500 × 600 mm - T-slots: DIN 650 – 18 mm (or as per customer specification) ==== Hydraulic Cylinder - Cylinder diameter: Ø 100 mm - Piston rod diameter: Ø 60 mm - Operating pressure: max. 250 bar - Return speed: 50 mm/s - Rapid approach speed: 25 mm/s - Pressure build-up time: max. 2 s (steel on steel) ==== Hydraulics - Hydraulic pump: Rexroth, 11 l/min - Motor power: 4 kW - Oil tank volume: 150 l - Hydraulic manifold / valves: Hydropack - Filter: Filtrec - Oil level monitoring: Electronic oil level sensor - Hydraulic unit: mounted at the rear, top - Pressure accuracy: ± 5 bar ==== Electrical System - Main supply: 400 V AC - Control voltage: 24 V DC Cedpeyghvfsfx Ag Dsgt - Frequency: 50 Hz - Connected load: approx. 4 kW ===== Straightening tasks, assembly operations, press-fit applications, workshop use, maintenance, small batch production Straightening press, single-column press, C-frame press, hydraulic press, shop press, press-fitting press Looking for a hydraulic press tailored to your application? Contact us for a custom quote. Our hydraulic presses are built according to both German and European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds upon these standards. Our key strength lies in custom machine building and press automation. We offer tailor-made hydraulic presses at surprisingly competitive prices. Only top-quality hydraulic components from leading European manufacturers are used in our presses.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Stasiun Bahan ZS 15 Stasiun bahan / troli bahan dengan 15 wadah untuk bahan bagian atas dengan meja kerja untuk penimbangan Konstruksi stainless steel, dapat dipindahkan Perangkat bekas, sudah dibersihkan Kami memiliki lebih banyak furnitur stainless steel di gudang! Cgodeykiagopfx Ag Dst

Tahun pembuatan: 1988, Kondisi: baik (bekas), 18 stations Shaft diameter: 89 mm Strip width: 600 mm Cgedpfjbh H T Isx Ag Dst Strip thickness: 3 mm

Tahun pembuatan: 1968, Kondisi: baik (bekas), 15 stations Shaft diameter: 120 mm Strip width: 180 - 830 mm Cgedpebif Evofx Ag Dst Strip thickness: 10 mm

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas), 16 stations Design: cassette Roller diameter: 45 mm Strip width: 300 mm Strip thickness: 2 mm Cgsdoh I Nizepfx Ag Dst

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2021, gaya penekanan: 135 t, Hidrobrasil Laboratory Press – 10–135 t – 1,100 × 650 mm – with Auxiliary Cylinder Codpfx Agoigg E Hj Dogt For sale is a hydraulic laboratory and assembly press by Hidrobrasil, equipped with a main cylinder offering 10–135 t of pressing force and an integrated auxiliary cylinder for sensitive operations up to 7 t. This machine is ideally suited for precise assembly, testing, and press-fitting processes, where both high force and precisely metered loads are required. ==== Technical Data & Information: Hydraulic Laboratory Press – 10–135 t ==== General Information - Manufacturer: Hidrobrasil - Model: Laboratory Press - Machine Type: Assembly Press - Design: Hydraulic press with auxiliary cylinder - Main Cylinder Force: 10–135 t - Auxiliary Cylinder Force: 1.5–7 t - Machine Weight: approx. 2.3 t - Overall Height: 2,900 mm ==== Working Area - Table Size: 1,100 × 650 × 120 mm - Max. Open Height: 800 mm - Table Height: max. 900 mm - Stroke / Travel: 400 mm ==== Speeds - Rapid Traverse: 2–10 mm/sec - Pressing Speed: 2 mm/sec ==== Hydraulics & Drive - Tank Capacity: 200 l - Pump Output: 60 l/min - Motor Output: 5 kW ==== Control & Safety - Control System: Siemens S7-1200 - Safety Technology: SICK - Remote Maintenance Module: included ==== Applications & Features - Combination of high pressing force and sensitive auxiliary cylinder - Ideal for assembly, testing, and laboratory applications - Precision control for delicate components ===== Assembly, testing applications, laboratory operation, fine pressing, press-fitting operations Hydraulic press, lab press, assembly press, test stand press, press-fit press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds upon these. Our key strength lies in custom machinery manufacturing and press automation. We offer bespoke hydraulic presses at surprisingly competitive prices. For the hydraulics, components from leading European manufacturers are predominantly used.