Beli Yale 750-3200 Kg bekas (68.253)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 20.331 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 970 mm, panjang bukaan pengisian: 1.800 mm, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 750 kg, berat keseluruhan: 33.000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baling press from the manufacturer HSM, type VK 8818 R-FU incl. conveyor technology and wire tie stations. The following technical data have been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we assume no liability. Technical specifications of the press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Main press force: 1000 kN Specific press force: 120 N/cm² Cutting edge ejector press force: 121 kN Feed chute dimensions: 970 x 1,800 mm Theoretical cycle time in idle: 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length variable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency controlled Connected load: 110 kW Total power consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput at a bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weight at a bale length of approx. 1.2 m: 650 to 750 kg/bale, depending on material Hydraulic oil tank volume: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions with conveyor system: 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of press: approx. 33 t (main press: approx. 12 t, press channel with bale clamp: approx. 10 t) Additionally ordered special equipment: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with equal performance Manual enabling/disabling of the number of wire-tie circuits to save tying wire with non-expansive materials Cutting edge ejector with 121 kN press force Sensor-based wire monitoring, with press shut-off in case of wire break or end of wire Bale chute Visual warning signal mounted on the control cabinet Condition of the press: The complete press system (baler and conveyor technology) is in good, immediately operational condition and has been cleaned weekly by the operator, greased and maintained in accordance with the manufacturer’s guidelines. Technical data for the chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: - HSM VK 8818 R-FU baler - Maintenance platform - Bale chute - Wire redirecting stations - Wire spool trolleys (without wire spools) - Stadler KF 1800 chain belt conveyor - Transverse sliding belt conveyor - Pit cover from feed conveyor to pit - Second control cabinet for operating the press at the conveyor - Machine documentation in English Crsdpfxeyz Af Eo Ag Djb Delivery time: The entire system is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other presses is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C862T03196T, Tahun pembuatan: 2019, jam operasional: 9.962 h, kapasitas angkut: 1.000 kg, tinggi angkat: 4.558 mm, jenis bahan bakar: listrik, tinggi konstruksi: 2.700 mm, jenis penggerak: Elektro, Order picker angkat tengah Nomor rangka: C862T03196T Titik berat beban: 400 Kondisi: Siap pakai dan berfungsi penuh Kondisi teknis: baik Jenis ban depan: Poliuretan Jenis ban belakang: Poliuretan Credpoyz Hfvofx Ag Dob Tegangan baterai: 24V

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2019, jam operasional: 400 h, kapasitas angkut: 3.000 kg, tinggi angkat: 3.105 mm, pusat beban: 500 mm, jenis bahan bakar: gas, tinggi konstruksi: 2.195 mm, daya: 46 kW (62,54 hp), tipe perpindahan gigi: otomatis, panjang garpu: 1.200 mm, lebar total: 1.140 mm, warna: kuning, Perlengkapan: garpu palet, kopling trailer, pencahayaan, - Fork carriage 1070 mm with integrated side shifter - Triple hose group - 3rd valve - Comfort vinyl seat - Lighting: Two front work lights; one rear - PVC roof panel Standard equipment and design features: - Hydraulic, low-maintenance brakes - Super elastic tires Credpfxjwm Iw Do Ag Dob - Integrated pin-type trailer coupling - Hydraulic levers mounted on the front panel - Continuous stability enhancement - High airflow radiator - Manual direction selector - Overhead guard - Operator restraint system - Adjustable steering column - Key switch - Steering wheel knob - LCD display with control indicators - Hour meter - Fuel gauge - Hydrostatic power steering

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: fungsi terbatas, nomor mesin/kendaraan: 6034, jarak pergerakan sumbu X: 7.200 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 590 mm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 25 m/menit, pergerakan cepat sumbu Z: 25 m/menit, daya nominal (semu): 45 kVA, produsen pengendali: HEIDENHAIN, model controller: Bahnsteuerung iTNC 530, tinggi total: 2.900 mm, panjang total: 12.500 mm, lebar total: 4.810 mm, berat keseluruhan: 14.000 kg, kecepatan spindel (min.): 100 rpm, kecepatan spindel (maks.): 12.000 rpm, tekanan kerja: 7 batang, The BZ 7000 is intended exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastic, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 - Year of manufacture: 04/2008 - Control system: HEIDENHAIN iTNC 530 path control - 4 axes - Travel X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Weight: 14t Equipment - Sturdy base frame in welded construction - Linear ball guideways on all axes - Milling spindle unit: 100 - 12,000 rpm, tool holder SK 40 Drives: - X axis (50 m/min) via rack and pinion drive - Y and Z axes (25 m/min) via ball screw - B axis 9000°/min - Swiveling operator panel - Automatic centralized lubrication - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication Technical Data - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse: X-Y-Z 50 –25 -25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc magazine with 12 SK 40 tool positions - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant system: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed correction: 80 – 120 % - Drilling capacity in St60/Alu: up to 28mm Ø - Thread cutting capacity in St60/Alu: up to M24 - Measurement system: rotary encoder / length measurement system - Positioning accuracy: 0.025 mm - Repeatability: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes Csdoyzxfnopfx Ag Djrb - Data interface: V24/RS-232-C - Travel X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement with safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 t - Sound emission: average sound pressure level 79 dB(A)

Kondisi: baik (bekas), Tahun pembuatan: 2014, Pabrikan: DEMAG Kapasitas beban: 860 kg + 630 kg (dilengkapi dengan dua crane) Csdpfx Aoyu R Dzog Djrb Dimensi teknis yang tepat ditunjukkan pada gambar Rel crane dapat diperpanjang dengan struktur dan kaki yang ditunjukkan pada gambar, namun, elemen rel lain juga diperlukan untuk perpanjangan, yang tidak tersedia!!

Kondisi: sangat baik (bekas), Dijual ragum mesin profesional, dirancang untuk bekerja di lingkungan produksi berat. Struktur baja yang kokoh, rel pemandu presisi, dan area penjepitan yang luas memastikan stabilitas dan kekakuan bahkan saat menangani komponen besar. Spesifikasi: • Berat per unit: sekitar 120 kg • Rahang kerja besar – lebar sekitar 200 mm • Rentang rahang kerja: sekitar 310 mm • Konstruksi besi tuang–baja yang kuat • Rel pemandu geser dikeraskan • Ideal untuk mesin frais besar dan pusat pemesinan CNC. Kondisi: bekas, berfungsi, tanda-tanda pemakaian normal. ///// HARGA TERTERA PER 1 UNIT ///// Cedew R S S Eopfx Ag Dsrb

Kondisi: hampir baru (bekas), Staff Ice System BTX150 Mesin Pembuat Es Batu / Pembuat Es 150 kg/24 jam, Tahun 2022. Data Teknis: Gelato BTX150 A Staff Ice System Mesin pembuat es krim untuk produksi dan penyimpanan es krim. Produksi dan penyimpanan es krim. Ekstraksi otomatis. Pengaduk dengan bilah polietilena tahan lama. Tutup ganda memungkinkan penambahan bahan selama proses. Tangki vertikal untuk kontrol penuh atas transformasi proses. 50 program operasi yang dapat disesuaikan. Spesifikasi Teknis: Kapasitas produksi maksimum 2 liter es krim per siklus. Produksi es krim 15 l/jam. Dimensi 43,5 x 59,2 x 59,5 cm. Csdpfx Ageyzc Rue Dsrb

Kondisi: baik (bekas), jarak tempuh: 188.921 km, daya: 140 kW (190,35 hp), pendaftaran pertama: 01/2011, jenis bahan bakar: diesel, ukuran ban: 195/75R16, konfigurasi gandar: 4x2, bahan bakar: diesel, kapasitas tangki bahan bakar: 75 l, warna: biru, tipe perpindahan gigi: mekanis, jumlah gigi: 6, kelas emisi: Euro 5, suspensi: lain, Tahun pembuatan: 2011, Perlengkapan: ABS, Bluetooth, kemudi berkuasa, kendali jelajah, komputer bawaan, kontrol traksi, kopling trailer, lampu kabut, pendingin udara, pengaturan jendela elektrik, program stabilitas elektronik (ESP), spion elektrik,

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan 2006 Jam operasional 8.900 Panjang garpu 1.150 mm Kapasitas angkat 2.000 kg Tinggi angkat 130 mm 4 kW / 1,4 kW Crodeyyxtpopfx Ag Deb 8,5 / 12 km/jam Lebar 780 mm Radius putar 2.190 mm Baterai 24 V Status baterai: sangat lemah, tidak ada fungsi angkat/jalan Kunci kontak hilang termasuk pengisi daya

Kondisi: bekas, Tahun pembuatan 2006 Jam operasional 7.415 Panjang fork 1.150 mm Kapasitas angkat 2.000 kg Tinggi angkat 130 mm 4 kW / 1,4 kW 8,5 / 12 km/jam Lebar 780 mm Radius putar 2.190 mm Baterai 24 V Status baterai: lemah, fungsi angkat & jalan OK Cjdpfxjyyxqus Ag Derb termasuk pengisi daya

Kondisi: Pembawa suku cadang rusak (bekas), Fungsionalitas: tidak berfungsi, Tahun pembuatan: 2006, Tahun pembuatan 2006 Jam operasi 6.300 Panjang garpu 1.150 mm Kapasitas angkat 2.000 kg Tinggi angkat 130 mm 4 kW / 1,4 kW 8,5 / 12 km/jam Lebar 780 mm Radius putar 2.190 mm Baterai 24 V Status baterai: sangat lemah, fungsi angkat dan berjalan tidak tersedia Cedsyyxffopfx Ag Dorb Kunci kontak hilang termasuk pengisi daya

Kondisi: bekas, Tahun pembuatan: 2004, Tahun pembuatan 2004 Jam operasi 7.202 jam Panjang garpu 1.200 mm Kapasitas angkat 1.400 kg Ketinggian angkat 6.876 mm Free lift 2.305 mm Tinggi tiang 2.875 mm, saat terangkat 7.926 mm Kontrol joystick PalmTech Pengemudian 360° Kemiringan dudukan garpu dengan side shifter terintegrasi Cjdpfxsyyxb To Ag Djrb Kemudi progresif fly-by-wire Berat kosong 2.450 kg tanpa baterai Baterai 48 V Berat baterai 1.119 - 1.200 kg Radius putar 1.688 mm Termasuk pengisi daya

Kondisi: baru, Tahun pembuatan: 2025, Persiapan Media Peledakan 1x Lubang Pembersih 1x Elevator Ember 1x Separator Angin 1x Ayakan Getar Listrik Crodpfxew Ivvco Ag Deb 1x Bunker Media Peledakan 1x Mesin Peledak Tekanan 200l 1x Selang peledak, nosel peledak, saklar darurat (Deadman), kabel kontrol 1x Lemari Kontrol Aksesori opsional: - Sekrup transportasi melintang sepanjang lebar ruang sandblasting (juga dapat digunakan sebagai silo cadangan tambahan untuk proses peledakan berjam-jam) - Ekspansi untuk 2 media peledakan: ferit dan mineral - Drum separator magnetik - Tahap demagnetisasi akhir - Laci magnet

Kondisi: baru, Tahun pembuatan: 2025, High Cube Basic Blasting Container with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + additional blasting vessel capacity for extended blasting operations without refilling. Type: SC.20FHC.5800 Basic Standard equipment, ready for operation: (Simply fill abrasive media and connect power and compressed air) - 1x Control cabinet with emergency stop, Siemens Logo controller - 1x Pressure blasting pot - 1x Pressure regulator and water separator - 1x Blasting hose DN 25 with 8mm blast nozzle - 1x Remote control with dead man’s switch - 1x Feed chute/Hopper for abrasive media - 1x Abrasive sieve + coarse particle catchment container - 1x Rising air separator for blast dust extraction (dust reduction during blasting) - 1x Filter unit with pre-chamber separator - 1x Extraction wall with louvered impact separator - 1x 4mm fabric-reinforced rubber wall lining - 1x Tread plate floor 3/5 - 1x LED lighting - 1x Emergency lighting, end-of-door switch, emergency stop - 1x Breathing air filter - 1x Blasting helmet - 1x Blasting gloves - 1x Suit Crodpfx Agjw Ivk Ts Deb Options: - Side Door Open: Container can be fully opened on the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - Crane runway 500kg - C-profile rail for powder coating applications - Blasting trolley - Filter with Big Bag - HEPA post-filter for hazardous dusts (e.g., when blasting stainless steel) - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor - And much more on request!

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, tekanan: 6 batang, masa garansi: 60 bulan, lebar dalam: 5.000 mm, panjang dalam: 15.000 mm, tinggi dalam: 5.000 mm, luas filter: 352 m², laju aliran volumetrik: 22 m³/jam, Perlengkapan: dokumentasi / manual, pencahayaan, Blasting house *up to 5 years warranty* for all blasting media made from a steel structure/insulated panels with filtration system, recirculation system, abrasive recovery, 200l pressure blasting vessel with automatic refilling, blasting hose with dead-man control, breathing air system, LED lighting, wall cladding 70 Shore 4mm fabric-reinforced rubber, sweep pit with bucket elevator. Abrasive recovery via sweep pit with bucket elevator, upgradeable to crosswise screw conveyor with dosing hood across the full width as sweep pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with an appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different abrasives (ferritic and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air separator for abrasive separation and cleaning. Safety features: emergency lighting with battery, emergency stop switches inside the cabin and outside, inspection window to blasting chamber, door/gate limit switches, dead-man control, quick venting for pressure vessel. Warranty up to 5 years on various components. Codpfx Agsu Hy Tps Dorb 50 years of experience and more than 3,000 installations in blast room plant engineering.

Kondisi: baru, Tahun pembuatan: 2026, Gerobak sandblasting 5t penggerak baterai untuk instalasi sandblasting - Kapasitas muat 5t - Untuk sistem rel Crsdpoyyxidefx Ag Dsb - Penggerak baterai - Remote control - Ukuran: P = 3000 mm, L = 1000 mm - Area untuk pemasangan dudukan benda kerja

Kondisi: baru, Tahun pembuatan: 2026, Gerobak sand blasting 10t untuk instalasi sand blasting dengan penggerak pneumatik. - Penggerak pneumatik untuk beban 10t - Kapasitas muatan 10 t - Ukuran: P=2000mm L=2000mm T=500mm Codpfeyyxfrox Ag Dorb - Untuk sistem rel - Dengan permukaan penampang untuk dudukan benda kerja - Meja putar sebagai opsi

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, Gerobak sandblasting manual untuk instalasi sandblasting, kapasitas muatan 5 ton - P= 3000 mm, L= 1500 mm, T= 500 mm Credpeyyxa Nofx Ag Deb - Kapasitas beban: 5 ton - Gerobak sandblasting dengan roda flens untuk rel di ruang sandblasting - Profil berdiri tegak agar media blasting dapat mengalir - Telinga tarikan untuk forklift - Meja putar tersedia sebagai opsi

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 1.500 kg, Perlengkapan: kendali jauh kaki, 3 Poros PEMA Meja Las APS 1500 - Ketinggian dapat diatur tanpa tingkat - Termasuk remote control manual - Beban maksimum 15.000 N - 1.500 kg - Kecepatan putar 0,07 - 1,3 rpm - Torsi rotasi 1.000 Nm - Kemiringan hidraulis hingga 135° - Momen kemiringan 3.000 N - Arus las maksimum 700 A - Diameter pelat 700 mm - Tinggi 780 - 1.550 mm Crsdpjyupd Hofx Ag Dob - Dimensi 1.640 x 810 mm - Sambungan 3 x 400 V / CEE 16A - Berat 730 kg

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2010, jam operasional: 14.832 h, kapasitas angkut: 5.000 kg, tinggi angkat: 4.100 mm, pengangkatan bebas: 1.460 mm, jenis bahan bakar: gas, tipe tiang: triplex, tinggi konstruksi: 2.210 mm, lebar kerangka garpu: 1.460 mm, panjang garpu: 1.200 mm, berat kosong: 7.960 kg, panjang total: 3.360 mm, jenis penggerak: Treibgas, lebar konstruksi: 1.400 mm, LPG forklift Load center: 600 mm Fork width: 150 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: very good Front tires type: Superelastic Front tire size: 3.00-15 Rear tires type: Superelastic Rear tire size: 28x9-15 Description: In addition to this Yale model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website – sago-online. Leasing and financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to give you detailed advice about this GLP50VX. P.S.: Our forklift master workshop specializes in repair, refurbishment, overhaul, and custom fabrication for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Sideshifter, Credju Dz E Uspfx Ag Djb Full free lift,

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 3.794 h, kapasitas angkut: 3.000 kg, tinggi angkat: 4.900 mm, pengangkatan bebas: 1.660 mm, jenis bahan bakar: gas, tipe tiang: triplex, tinggi konstruksi: 2.300 mm, lebar kerangka garpu: 1.100 mm, panjang garpu: 1.600 mm, berat kosong: 5.230 kg, panjang total: 2.720 mm, jenis penggerak: Treibgas, lebar konstruksi: 1.200 mm, LPG forklift Load center: 500 mm Fork width: 125 mm Fork thickness: 50 mm Mast type: Triplex Crodpfx Agou Dz A Tj Dob Condition: Ready for operation and fully functional Technical condition: Very good Front tyres type: Superelastic Front tyre size: 28x9-15 Rear tyres type: Superelastic Rear tyre size: 6.50-10 Description: In addition to this Yale model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & side loaders in stock in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing & financing at attractive terms are always possible with us. We are also happy to buy your used equipment directly, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to advise you in detail about this GLP30VX. P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul, and custom modification for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale at our location. Sideshift, Heater, full cab, full free lift,

Tahun pembuatan: 2020, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Kami menawarkan pipa KD bekas ini dengan diameter 315mm, pipa limbah KG 2000 KG, warna hijau, tahun pembuatan 2020. Sekitar 70m, panjang pipa 5m, berbagai jenis elbow, sambungan Y, dll. Rentang suhu: -20 hingga 90 °C Csdpeyyml Tjfx Ag Dorb Material seal: cincin karet sesuai DIN EN 681 Warna: hijau muda RAL 6017 Bahan: Polipropilena (PP) Kekakuan cincin SN: 10 kN/m² Kedap air (dijamin hingga): 7,0 bar Ketahanan kimia (rentang pH): 2 hingga 12 pH Konduktivitas termal: 0,04 W/(K·m) Koefisien muai panjang: 0,08 mm/(m·K) Modulus E jangka pendek: 2500 N/mm² Modulus E jangka panjang: 450 N/mm² Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan atau hubungi kami.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2003, jam operasional: 540 h, kapasitas angkut: 1.400 kg, tinggi angkat: 4.000 mm, pengangkatan bebas: 1.350 mm, jenis bahan bakar: listrik, tipe tiang: triplex, tinggi konstruksi: 1.800 mm, panjang garpu: 1.200 mm, berat kosong: 1.300 kg, panjang total: 785 mm, jenis penggerak: Elektro, lebar konstruksi: 800 mm, Stacker elektrik Titik beban: 400 mm Tipe mast: Triplex Kondisi teknis: baik Jenis ban depan: Polyurethane Kondisi ban depan: 80 - 100% Jenis ban belakang: Polyurethane Kondisi ban belakang: 80 - 100% Tegangan baterai: 24V Crodpfjyr T Anox Ag Dob Kapasitas baterai: 250Ah Tahun pembuatan baterai: 2025 Kondisi baterai: 80 - 100%

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut: 6.500 kg, Load capacity: 6,500 kg Codswd Twqspfx Ag Dsrb Note: Arm diameter adjustable from 1,880 mm to 4,550 mm (extendable) Space-saving and infinitely adjustable; the extension arms can be locked in position Speed continuously variable from 0.001 to 5 rpm Motor power: 3 kW Torque: 15,000 Nm Height: 800 mm Maximum current transmission: 2,000 A Weight: 4,700 kg Supplied with hand and dual-foot remote control CE certificate, declaration of conformity, documentation, wiring diagram Includes original sales invoice from 2016 Current new price approx. €28,000

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D875B06455T, Tahun pembuatan: 2019, jam operasional: 8.684 h, kapasitas angkut: 3.000 kg, jenis bahan bakar: gas, jenis penggerak: Treibgas, Forklift Gas LPG Nomor rangka: D875B06455T Titik berat beban: 500 Kondisi: Direkondisi ulang dengan garansi Kondisi teknis: Baik Jenis ban depan: Superelastik Jenis ban belakang: Superelastik Crjdpsywqcwsfx Ag Deb Deskripsi: Servis + UVV baru Side shift, kabin penuh, free lift penuh, safety light, LED.