Beli Arburg Steuerung bekas (1.279)

Kondisi: baru, Baldor BSC1005-24 pengendali penggerak ID: 21137B SN: 1295MG24826 - Input: 320VDC / Output: 0-250VAC, belum digunakan, 100% berfungsi, lingkup pengiriman sesuai foto Nodjy Npxnspfx Al Tslh

Kondisi: baru, CAPTRON tombol sensor untuk kontrol dua tangan untuk mesin stamping dan press / SCB4-185Z-S + SCA4-185Z-S + MCR-225 relai keselamatan dua tangan + soket kabel LKW-SCA-5 dengan kabel 5m + soket kabel LKW-SCB-5 B dengan kabel 5m, belum pernah digunakan dalam kemasan asli yang sudah dibuka, berfungsi 100%, pengiriman sesuai foto. Nedoy Np Iiopfx Al Tolh

Kondisi: baru, Tahun pembuatan: 2023, panjang total: 2.450 mm, - Maximum working height – indoors: 8.13 m - Maximum working height – outdoors: 6.98 m - Maximum platform height – indoors: 6.13 m - Maximum platform height – outdoors: 4.98 m - Platform height – retracted: 1.07 m - Platform length – outside: 2.26 m - Platform length – outside, extended: 3.18 m - Platform extension – length: 0.91 m - Platform width – outside: 1.16 m - Guardrail height: 1.10 m - Toe board height: 15 cm - Maximum occupants on platform (indoors/outdoors): 2 / 1 1 - Drivable up to max. platform height: 6.13 m - Travel speed – stowed: 3.2 km/h - Travel speed – raised: 0.8 km/h - Gradeability – stowed: 25% - Turning radius – inside/outside: 0 / 2.29 m - Lift/lower time: 32 / 26 sec - Tilt sensor activation (longitudinal/lateral): 3° / 1.5° - Non-marking solid rubber tyres: 38×13 cm - Drive system: 24 V DC (4×6 V 225 Ah) - Hydraulic system tank capacity (E-Drive): 15 L - Sound/pressure level (ground): < 70 dBA - Sound/pressure level (platform): < 70 dBA - Vibration: < 2.5 m/s² - Rear recessed socket for battery charger - Power cable to platform without residual current device - Power cable to platform - Descent, tilt and movement alarm - Platform with anti-slip checker plate floor Nljdey S Epzopfx Al Toh - Dual LED strobe warning lights - Electronic horn (buzzer) - Folding guardrail, full-height swing gate (GS-2046) - Folding guardrail, half-height swing gate (GS-2032) - Anchorage points for safety harnesses - Protective cover for platform control panel - Platform load-sensing system - Proportional drive and lift control - Platform extension - SmartLink dual-zone control - Emergency lowering device - Multi-disc brakes on two wheels - Electric brake release device - Forklift pockets - Manual brake release device - Fully integrated diagnostics system with battery indicator - Pot hole protection - Non-marking solid rubber tyres - Tech Pro Link connection - Lashing points and crane lifting eyes

Kondisi: bekas, Tahun pembuatan: 1996, Dijual mesin injeksi ARBURG 420C tahun 1996. Mesin dalam kondisi beroperasi penuh, terawat dengan baik, dan digunakan untuk produksi ringan. Konstruksi hidrolik yang kokoh, ideal untuk cetakan berukuran sedang. Parameter: - Gaya penutupan: sekitar 100 ton - Jarak antar kolom: 420 x 420 mm - Ukuran screw: sekitar 35-40 mm - Volume injeksi: 140-180 cm³ Kontrol: Dialogica / Selogica - Berat: sekitar 3,5 ton Nodpfxjzdlwaj Al Tjlh

Kondisi: baru, trl_01 Nlsdpszaalrsfx Al Tjh

Kondisi: bekas, Daya penggerak: 1,5 kW Nljdpjzcgg Iefx Al Toh Tekanan kerja / bar Kapasitas pompa / l/menit Merek: AC-Motoren Tipe: FCA 0L-4 Daya: 1,5 kW - 1,8 kW Putaran: 1400 rpm - 1680 rpm Volume tangki: sekitar 14 liter

Kondisi: bekas, für BW320 Ilsa Nljdozabplepfx Al Tjh

Kondisi: sangat baik (bekas), Pompa hidrolik, pompa piston radial, Rexroth untuk Arburg Moog No. D955Z8001 /H Tipe HZR18A1RKP100TM28R1Z00DS1 100 cc S/N 20060056 Nljdpfxozdf H Nj Al Teh

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, gaya penjepit: 500 kN, diameter sekrup: 25 mm, langkah pembukaan: 350 mm, For sale is an injection moulding machine from Arburg, model 320 S 500-150. The company from which this machine originates places great importance on maintenance. The machine's production order has been completed, and no follow-up order has been scheduled. Therefore, this machine has been removed from production. The pump has a slight pressure loss but is operational. Nsdpfx Alokwcydo Tslh Technical data: Year of manufacture: 2004 Clamping force: 500 kN Screw diameter: 25 mm Ejector force: 35 kN Opening force: 120 kN Opening stroke: 350 mm Distance between platens: 575 mm Mould installation height: 225 mm Prices are subject to VAT. Machine inspection is possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Kondisi: baik (bekas), 3522448 Nedpfx Alomch Uxo Tjlh

Kondisi: siap digunakan (bekas), Siemens 6FC3641-0AX SINUMERIK PRIMO SG complete control unit, serial number: A1495045, used, normal signs of wear, 100% fully functional, scope of delivery as per photos Nedpfx Aen Emz Isl Telh

Kondisi: bekas, CNC control, control panel, operator panel, operating unit, card slot, control cards, MC3 control, plug-in cards, printed circuit boards, valve module, valve amplifier, circuit board, analog distributor card, distribution printed board, valve amplifier, bus board, bus PCB, processor card, interface card, temperature control card -Manufacturer: Mannesmann Demag, electronic control modules from Demag D 100-275 NC injection molding machine -Plug-in card rack: Murrelektronik 630055 Nledpfx Alon Hbc Ie Tsh -Control card: Philips 9404 780 020 -Individual components: see photos -Price/sale: complete -Dimensions (overall): 315/140/H215 mm -Weight: 1.4 kg

Kondisi: siap digunakan (bekas), Brinkmann motor consisting of Siemens 1LE10011DA634FB4-Z three-phase motor (SN: UD 1311/1580810-001-001, Z, see nameplate) + Brinkmann Pumps 6UMFR0AA-D05105 control unit (SN: 90549LJP00002), used, in good condition, 100% functional. Delivery scope as per photos. PLEASE NOTE: Costs for packing and shipping on request! ATTENTION: Please enquire separately for charges for packing and transport! Nledpfsldln Usx Al Tsh

Kondisi: siap digunakan (bekas), Brinkmann motor consisting of Siemens 1LE10011DA434FB4 - Z - GP three-phase motor SN: UD 1312/1583831-001-002, Z see nameplate + Brinkmann Pumps 6UMFR1AA-D05104 control unit SN: 90549MFQ00001, used, in good condition, 100% functional, scope of delivery as per photos. IMPORTANT: Please enquire separately for packaging and shipping costs! ATTENTION: Please enquire for charges for packing and transport separately! Nlsdpfjldlpcox Al Tjh

Kondisi: baru, Tahun pembuatan: 2025, Eine kompakte Faserlaser-Blechschneidemaschine mit Vollschutz Kleine Stellfläche bei gleichzeitig vollständigem Schutz für erhöhte Sicherheit. Jeder Rahmen des Maschinenbetts wird nach dem Zapfen-Steck-Verfahren verschweißt, um optimale mechanische Eigenschaften, bessere Stabilität und hohe Festigkeit zu gewährleisten. Der ausziehbare Schneidetisch – auf Wunsch auch elektrisch betriebener Tisch – spart Platz und verbessert das Bedienerlebnis deutlich. Bequeme und schnelle Einhand-Bedienung zum Öffnen und Schließen; Die Tür des Laserschneiders ist durch ein Zahnstangen-Ritzel-Übertragungssystem kombiniert mit einem selbstverriegelnden Schneidesystem sicher und zuverlässig. Faserlaser-Schneidköpfe können herausragende Hindernisse erkennen, wodurch die Beschädigungsrate effektiv reduziert und die Wartungskosten der Laserschneidanlage gesenkt werden. Njdpjhwrg Nofx Al Tolh Verarbeitbare Materialien: Metall Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1500W, 2000W, 3000W, 6000W, 12000W Arbeitsbereich: 3048 x 1524 mm Schneidgeschwindigkeit: 0–100 m/min Positioniergenauigkeit: ±0,05 mm Wiederholgenauigkeit: ±0,03 mm Unterstützte Dateiformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC-Steuerung: Ja Kühlung: Wasserkühlung

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 83.000 h, gaya penjepit: 350 kN, diameter sekrup: 25 mm, For sale: Injection moulding machine by Arburg, model 320S 350-60 Year of manufacture: 2000 Automatic operating hours: 83,000 Screw diameter: 25 mm Clamping force: 350 kN Cylinder length: 60 Transport can be organised Europe-wide on request and for an additional fee. Price incl. VAT Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Nledpfshhuq Aox Al Tsh Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or contact options, please visit our website.

Kondisi: bekas, For sale are eight propeller agitators from Erwin Stelzer Warburg, model DRH 64. The condition ranges from good to heavily used. RPM: 1450 Voltage: 220/380 V Nlsdpfx Aloga Dv He Toh Power: 7.5 kW Shaft length: 740 mm Impeller diameter: 320 mm Connection: DN250

Kondisi: bekas, For sale is a propeller agitator from Erwin Stelzer Warburg, model DRX3204D. Agitator specifications: - RPM: 1435 - Voltage: 220 / 380 V Nedega I Sxopfx Al Tjlh - Power: 2.2 kW - Shaft length: 500 mm - Impeller diameter: 280 mm - Connection: DN250 - For further information, please refer to the type plate.

Kondisi: baik (bekas), cnc_board_parts_001 Njdpfx Alsg S Dkmj Tslh

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, tingkat otomatisasi: semi-otomatis, jenis aktuasi: listrik, produsen pengendali: Bodor, jenis laser: laser serat, Einstiegsmodell Faserlaser-Blechschneidemaschine Niedrige Laserschneidekosten und einfache Bedienung Der modulare Schneidtisch mit Versteifungen spart Zeit beim Zerlegen und verbessert Komfort und Steifigkeit. Die spezielle Faserlaserdüse und der Schneidprozess ermöglichen ein schnelleres Sauerstoffschneiden von Kohlenstoffstahl, gas- und kostensparendes Niederdruck-Stickstoffschneiden von Edelstahl sowie ein hochwertiges Luftschneiden bei Kohlenstoffstahl. Faserlaserschneidköpfe erkennen hervorstehende Hindernisse, um die Schadensrate effektiv zu senken und die Wartungskosten des Laserschneiders zu sparen. Materialien: Metall Zustand: Neu Lasertyp: Faserlaser Nledpfx Aohv U Swol Toh Laserleistung: 1000W, 1500W, 2000W, 3000W Schneidbereich: 4000 x 1524 mm Schneidgeschwindigkeit: 0–100 m/min Positioniergenauigkeit: ±0,05 mm Wiederholgenauigkeit: ±0,03 mm Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC-Steuerung: Ja Kühlung: Wasserkühlung

Kondisi: baru, Tahun pembuatan: 2026, Horizontal bending machine T 300 Multiprogram - ZOPF -with semi-automatic control -NC control (99 programs with 16 steps each) -includes bending pin (without punch) -includes tool holder for dies and foot pedal - Pressing force: 30 tons - Infinitely variable stroke adjustment: 0-250 mm - Adjustable working speed: Maximum working stroke: 10 mm/sec. Return stroke: 20 mm/sec. - Adjustable hydraulic pressure - Maximum tool height: 250 mm - Motor power: 3.0 kW Nljdpfjfh Tntox Al Toh - 400 Volt 50 Hz 3 phase - Working height: 900 mm - Enclosed table - Replaceable wear plate - Weight: 950 kg - Colour: RAL5012 / RAL7015 - Bending capacities: Flat material 200x20 mm Round tube 3/8" - 2"

Kondisi: hampir baru (bekas), Control system repairs for Heidenhain controllers Njdpfx Alofica Ne Tolh We repair various types of control systems from Heidenhain, for example: TNC 111, TNC 121, TNC 131, TNC 135, TNC 145, TNC 150, TNC 151, TNC 155. We also have a large selection of exchange controllers and spare parts available in our range.

Kondisi: bekas, jarak tempuh: 40.382 km, pendaftaran pertama: 06/1987, jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, nomor mesin/kendaraan: 3617, Perlengkapan: kunci diferensial, penggerak semua roda,

Kondisi: siap digunakan (bekas), 11 DRK 26 H agitators by Erwin Stelzer Warburg with emergency stop switch. 8 units equipped with propeller, 3 units without propeller. Product data: - Power: 1 kW - Voltage: 220/380V - Current: 5.9/3.4 A - Speed: 920 rpm - Power output: 2.7 HP Nljdpofr Ianofx Al Teh - Power factor: 0.64 cos φ - Insulation class: E - Shaft length: 400 mm - Shaft diameter: 30 mm - Total length: 800 mm - Impeller diameter: 240 mm - Connection: DN125

Kondisi: bekas, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC control Serial No.: Year of manufacture: 1990 4 Axes (X, Y, Z, and R) Table clamping surface: 1300 x 250 mm Distance between centers: 700 mm Center height: 155 mm Grinding length (X-axis): max. 400 mm Grinding width (Y-axis): max. 260 mm Nedpsd Rmcmjfx Al Tolh Grinding spindle speed: max. 6000 rpm Grinding spindle drive: 3 kW Power supply: 380 V, 50 Hz, 25 A - CNC control dismantled Required space (L x W x H): 3800 x 2400 x 2300 mm Weight: 3000 kg Machine not functional, CNC control missing. Mechanically in good condition, ideal for control system retrofit For use as a spare parts donor or for rebuilding with new control system.