Beli Biesse Biesse Rover A 3.40 Nbc 412 bekas (79.015)

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 90 mm, lebar benda kerja (maks.): 3.200 mm, panjang benda kerja (maks.): 3.200 mm, ketebalan tepi (maks.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units, left side: 5 Milling unit (AS10) Double finish milling cutters, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 Guodpfx Aisyq Avhsyob End trimming Top and bottom trimming (coarse) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraper Polishing (2 motors) Spraying device TECHNICAL DETAILS Min. panel height: 10 mm Max. panel height: 90 mm Max. panel length: 3,200 mm Max. panel width: 3,200 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm EQUIPMENT Feed chain with carriers Pressure with rubber belt Panel guide rails with NC positioning Edge spool magazine with 6 positions Hot melt glue system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spraying device mounted on top cabinets The machine is sold and delivered in its actual and legal condition ("as seen and agreed") on the basis of photographic documentation and technical/commercial descriptive documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7685

Kondisi: bekas, BIESSE SAND REGAL 1350 adalah wide belt sander industri yang dirancang untuk kalibrasi dan pengamplasan halus panel dalam produksi furnitur dan papan. Seri REGAL menawarkan solusi produksi yang kokoh dan cocok untuk volume produksi menengah hingga tinggi. Mesin ini dirancang secara modular dan memungkinkan kombinasi operasi kalibrasi dan finishing dalam satu proses berjalan, yang secara signifikan meningkatkan produktivitas produksi. Guedpfeynb Rfox Aiyeb

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Kode Ferwood: RS0003524 - Kode Produsen: 2420A0716 - Kondisi: Seperti baru (barang pameran) - Fungsionalitas: Berfungsi penuh - Mesin yang kompatibel: - Jika Anda berminat, kami menawarkan layanan overhaul, silakan hubungi kami. 1,5 KG 36X26X21 Godpsymfgbjfx Aiysub

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, nomor mesin/kendaraan: 1000058013, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 1.225 h, Perlengkapan: Penandaan CE, dokumentasi / manual, GERMAN_SPOKEN WIR SPRECHEN DEUTSCH Hersteller: BIESSE Modell: BREMA EKO 2.2 Baujahr: 2022 Zustand: sehr gut Kategorie-ID: 2502 Typ-ID: 4257 Typ: Vertikales Holzbearbeitungszentrum Wir bieten dieses sehr gut erhaltene vertikale Holzbearbeitungszentrum BIESSE BREMA EKO 2.2, Baujahr 2022, zum Verkauf an. Die Maschine wurde im Oktober 2022 zusammen mit der Biesse B-solid Software zum Neupreis von 120.000 € zzgl. MwSt. angeschafft. Die Maschine hat nur 1.225 Betriebsstunden und wird inklusive aller auf den Bildern gezeigten Werkzeuge verkauft – ein echtes Schnäppchen! Bitte beachten Sie, dass wir die Maschine als "gebraucht" verkaufen. Wir verkaufen als Endanwender, daher können wir keine Garantie auf die Maschine geben. Gerne laden wir die Maschine auf einen LKW und können auf Wunsch auch den Versand organisieren. Für Rückfragen oder weitere Informationen stehen wir Ihnen gerne telefonisch oder per Nachricht zur Verfügung. Guodpfjyu Nuljx Aiyob Unser Tischlereibetrieb verkauft diese sehr gepflegte Biesse EKO 2.2 mit wenig Einsatzzeit – nur 1.225 Betriebsstunden. Die Maschine ist sehr gut ausgestattet und wird zusammen mit der Biesse B-suite Software sowie sämtlichem auf den Fotos abgebildeten Zubehör verkauft. Das ist ein Angebot, das Sie nicht verpassen sollten! Neupreis im Oktober 2022: 120.000 € netto Verkauf erfolgt ohne Garantie, da wir kein Maschinenhändler sind, sondern Tischler. Wir können den Transport organisieren und die Maschine auf einen LKW verladen.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Mesin Edgebander BIESSE Akron 1440A Godpfxeyh A I As Aiyeub Ketersediaan: April/Mei 2026 Sertifikat CE Tahun produksi: 2017 Mesin dapat diperiksa sebelum pembelian

Kondisi: bekas, BIESSE 2424A0007 pressure gauge, Gsdpfx Aielkchysyeub

Kondisi: bekas, nomor mesin/kendaraan: 007809, Jenis tepi yang dipasang: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA, PUR Mesin pelapis pinggir: Mesin 1 Lebar panel maksimum: 1200 mm Guodpfx Asyhbn Djiyjb Kecepatan maju maksimum: 40 m/menit Unit kerja, sisi kanan: 8 unit Unit kerja, sisi kiri: 8 unit

Kondisi: bekas, nomor mesin/kendaraan: 006370, Type of attached edge: thin edge, thick edge Adhesive system: EVA Jointing milling: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 12 pcs Godpfx Aijl Txw Hoysub

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1000042683, panjang umpan sumbu Y: 1.300 mm, panjang umpan sumbu Z: 80 mm, frekuensi input: 50 Hz, arus masuk: 63 A, lebar total: 1.950 mm, panjang total: 1.950 mm, tinggi total: 3.100 mm, Brema Vektor 15 adalah pusat pemrosesan dengan kolom vertikal yang dikendalikan secara numerik untuk pengerjaan papan kayu olahan. Mesin ini dapat melakukan pengeboran, penggilingan, dan pengukiran dengan pantograf. Pemrosesan pada 4 sisi papan serta profiling dimungkinkan berkat sistem paten transportasi papan. Mesin ini dilengkapi dengan: -kepala dengan spindle vertikal independen 21 (7 pada X +14 pada Y) serta spindle horizontal (2K +2K pada X), -spindle utama vertikal (unit milling) 7,5 kW, -sistem pengganti alat otomatis turret dengan 10 slot. Unit tambahan pada turret: 1. gergaji pada X Guedpfx Aisx Hfh Teyjb 2. gergaji pada Y 3. pengeboran pada Y (1K+1K) 4. pengeboran engsel (1x35mm +2x5mm) 5. milling 6. milling 7. milling

Kondisi: baik (bekas), Tahun pembuatan: 2008, Biesse Single-Sided Edge Bander STREAN B1/8.0 Year 2008 - Code 0000015: CNC-controlled Y-axis on entry guide - Code 0000011: Squaring infeed device - Code 0000517: Automatic lubrication C1 - Code 0000017: Parallelogram part support 5.5-8.5 - Code 0000439: B1 installation kit with panel return device - Code 0000136: Liquid jet application unit - Code 0000669: RT20 trimming unit, 2×3.5 kW, 9000 RPM - Code 0000336: Additional set of diamond cutters, H=60 - Code 0000469: SP20 gluing unit - Edge thickness: 0.3–3 mm Guedpfx Aexala Tsiyjb - "Bswyjukh Tqjhhpkswt" (not translatable, may be a code or typo) - Wood thickness: 20 mm - Panel thickness: 10–60 mm - Code 0000244: CNC-controlled Y-axis for pressure zone - Code 0000682: Dual-position edge magazine for SP10 and SP20 - Code 0000144: Additional glue pot - Code 0000367: End trim IT90-S, 2×0.3 kW, 12,000 RPM - Code 0000704: Solid wood edge kit up to 20 mm thickness for IT90 - Code 0000711: 3-position pneumatic kit for IT90 - Code 0000151: RS10 flush/trimming unit, straight tool L=20, 2×1.3 kW, 12,000 RPM - Code 0000901: Straight tool variation L+30 (solid wood) for RS10 - Code 0000152: 2.4 kW motors for RS10 edging group – straight tool L=30 - Code 0000536: Automatic 2-position adjustment for RS10 - Code 0000158: RF=40 edge trimming/bevel unit – 25° chamfer, R=1.5/2/3 mm, 2×0.65 kW, 12,000 RPM - Code 0000651: Copying units for RF10-RF30-RF40 groups - Code 0000579: AR30 multifunction rounding unit, R=2 mm - FAST system with 2 pre-selection positions via control panel - 2×0.35 kW, 12,000 RPM - Code 0001017: 4-position pneumatic system for AR30 - Code 0000165: RB10 edge scraper group, R=2 mm - Code 0000652: Copying units for RB10-RB30-RB40 groups - Code 0001004: RC20 glue scraper group - Code 0000171: SZ30 oscillating brush group, stacked, 2×0.18 kW, 1400 RPM - Code 0000989: Liquid jet application kit for SZ30, SZ60 - PH10 edge preheater WITHOUT PANEL RETURN

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, unit frais pra-pemotongan stasiun lem untuk granulat ketinggian kerja maksimum 60 mm Guodpfx Aieydpp Isyob guillotine pemotong tepi dari rol unit pemotong tepi presisi unit mesin frais untuk sisa tepi di atas dan bawah panel scraper profil scraper datar pemoles panjang mesin 420 cm tahun produksi 2012 penandaan CE

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, berat benda kerja (maks.): 50 kg, tinggi benda kerja (maks.): 900 mm, panjang benda kerja (maks.): 2.600 mm, kedalaman pengeboran: 25 mm, kecepatan spindel (maks.): 24.000 rpm, TECHNICAL DETAILS Workpiece Dimensions Length min: 200 mm Length max: 2,600 mm Height min: 35 mm Height max: 900 mm Thickness min: 8 mm Thickness max: 60 mm Maximum panel weight: 50 kg Length with extension: max. 3,200 mm Drilling Head Unit BH17 Vertical chucks: 10 Horizontal double chucks: 3 Circular saw blade diameter: 120 mm Max. working depth: 25 mm Saw blade thickness: 4 mm Rotation: clockwise Electrospindle Power at 12,000 – 15,000 rpm (S1): 5.5 kW Speed range: 1,000 – 24,000 rpm Rotation: clockwise Gujdpfx Aow Hqrksiysb EQUIPMENT BSolid Software – 3D CAD-CAM design software (simulation and management of processes for machining and drilling centers, option to select additional modules for extended functions according to production requirements) Note: Disassembly and loading can be offered by a Biesse service partner for €2,000.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, nomor mesin/kendaraan: 77503, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 60 mm, kecepatan pemakanan sumbu X: 25 m/menit, berat keseluruhan: 6.510 kg, produsen pengendali: SINTRA, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Max. feed speed: 25 m/min MACHINE DETAILS Control unit: Sintra Weight: 6,510 kg EQUIPMENT - Sanding unit - Coil-holder magazine with 2 positions and automatic edge change via CNC - Adhesive unit for EVA hot-melt glue, equipped with preheater and glue pot - Preparation for adhesive unit for PUR glue - Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC - End trimming unit with 2 motors and automatic tilt adjustment - Filler unit with 2 vertically stacked motors Guedpfx Aoydidreiyeb - Edge smoothing unit with 2 tiltable motors - Multifunctional 4-motor corner rounding unit (smoother + corner rounding machine) with CNC-controlled automatic adjustment - Anti-stick unit - Adjustable edge scraper unit - Glue saving unit - Oscillating brush unit - Electronically adjustable working height - Motorised rubber band with increased pressure - Motorised and electronically adjustable panel guide - Side roller conveyor with idler rollers for panel support

Kondisi: sangat baik (bekas), COMPLETE DOUBLE-SIDED SIZING AND EDGE-BANDING LINE, also suitable for NARROW PARTS min. 65 mm, featuring high-speed feed technology, incl. 3 CNC-controlled through-feed drilling machines (one designed for lateral drilling in longitudinal direction) and 1 through-feed crosscut saw (splitter) Comprising the following machines: W05024A) Loading unit (gantry) "RBO (BIESSE)" model Winner C W05024B) 1st single-sided sizing and edge-banding machine (left) "BIESSE" model Stream SB1 TWIN W05024C) 2nd single-sided sizing and edge-banding machine (right) "BIESSE" model Stream SB1 TWIN W05024D) 1st rotation device (90° LONGITUDINAL-TO-CROSSWISE) "RBO (BIESSE)" model GPK-1 W05024E) Double-sided sizing and edge-banding machine "BIESSE" model Stream SB2 / 11.0 W05024F) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024G) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN W05024H) 2nd rotation device (90° CROSSWISE-TO-LONGITUDINAL) "RBO (BIESSE)" model GPK-2 Gedpfx Aetr Envoiyoub W05024I) CNC-controlled through-feed drilling machine "BIESSE" Techno FDT CN (for lateral drilling in longitudinal direction) W05024J) Through-feed crosscut saw (splitter) "TECNOLOGICA" W05024K) Dust removal and cleaning machine "WANDRES" W05024L) Stacking unit (gantry) "RBO (BIESSE)" model Winner SC

Kondisi: sangat baik (bekas), COMPLETE FOUR-SIDED PANEL PROCESSING AND EDGE-BANDING LINE, max. working width: 3,000 mm, equipped with automatic feeding and stacking system, comprising the following machines: X03001A) Feeding gantry (with 2 loading stations) "RBO" Model Winner C 3200 X03001B) 1st double-sided panel sizing and edge-banding machine "BIESSE" Stream SB 1 - 7.5 X03001C) Panel turning device (90° LONGITUDINAL–CROSSWISE) "RBO" Model GPK 1 X03001D) 2nd double-sided panel sizing and edge-banding machine "BIESSE" Stream SB 2 - 11 X03001E) Panel turning device (90° CROSSWISE–LONGITUDINAL) "RBO" Model GPK 2 Gusdpfei Rbg Tjx Aiyjb X03001F) Stacking gantry (with 2 unloading stations) "RBO" Model Winner S 3200

Kondisi: sangat baik (bekas), COMPLETE DOUBLE-SIDED FORMATTING AND EDGE BANDING LINE (including SOFTFORMING), with throughfeed drilling machines, splitter, and high-speed automatic conveying technology. Configured as follows: A) Infeed station – stacking system (gantry) "RBO (BIESSE)" Model Winner C (1) B) 1st double-sided formatting and edge banding machine "BIESSE" Model Stream SB1 11.0 Softforming C) 1st rotation station (90° LONGITUDINAL-TRANSVERSE) "RBO (BIESSE)" Model GPK-1 D) 2nd double-sided formatting and edge banding machine "BIESSE" Model Stream SB2 9.5 E) 2nd rotation station (90° STRAIGHT or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-2 F) CNC-controlled throughfeed boring machine "BIESSE" Techno FDT CN (No. 2 horizontal boring supports, No. 6 vertical lower boring supports and No. 3 vertical upper boring supports) G) CNC-controlled throughfeed boring machine "BIESSE" Techno FDT CN (No. 2 horizontal boring supports, No. 6 vertical lower boring supports and No. 3 vertical upper boring supports) H) 3rd rotation station (90° STRAIGHT or TRANSVERSE-LONGITUDINAL) "RBO (BIESSE)" Model GPK-3 I) Longitudinal panel saw (splitter) "GM (for BIESSE)" Model Split 4-84 LT Gedpfx Ajttgy Heiyoub L) Outfeed unstacking station – stacking system (gantry) "RBO (BIESSE)" Model Winner SC (2)

Kondisi: sangat baik (bekas), Single-Sided Destacking Station - Upper traverse horizontally movable by 180° - Console table with vacuum clamps - Internal lifting platform with motorized sheet metal roller conveyor - Sliding front safety guard - Separate control cabinet and operator panel - External roller conveyor for stack of sheets from the destacking unit - External powered roller conveyor from destacking unit, also with belt for transferring sheets at 90° - Operating capacity (cycles/min): 12–15 - Sheet thickness (min/max) mm: 10–40 - Min. sheet dimensions mm: 250 x 320 Gsdpfx Aiscggy Soyeub - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Kondisi: sangat baik (bekas), CNC-controlled (automatic) drilling and dowel inserting line, consisting of: VZ0250A) "RBO" Tornado C 1300 INFEED STATION with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 motorized throughfeed belts, feed rate up to 75 m/min - 2 horizontal drilling units (each equipped with 2 drilling heads, each 1.8 HP and 22 drilling spindles) - 4 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and differing drilling heads) Gedpfxjd Nviqe Aiyoub - 3 upper drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and differing drilling heads) - 3 upper vertical workpiece clamps - 2 (endless) screws for chip extraction CNC control NC 500 for both machines. VZ0250C) AUTOMATIC DRILLING AND DOWEL INSERTING MACHINE "BIESSE" Techno SDT, with CNC - 2 motorized throughfeed belts, feed rate up to 75 m/min - 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel inserting tools) - 2 lower drilling units (each with 2 split and reversible drilling heads, each 1.8 HP and differing drilling heads) - 2 upper vertical workpiece clamps - 2 (endless) screws for chip extraction VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Model GP 11 VZ0250E) STACKING STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Kondisi: bekas, Complete factory for furniture manufacturing, comprising: SZ0M23) Angular panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Mod. GammaDue (3800x2200 mm) SZ0M26) Panel saw (multi-blade) "GABBIANI" (finished panels 4250 x 2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper / veneer / laminated SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper / veneer / laminated SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed automatic handling "RBO-BIESSE" SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with second double-sided sizing and edge banding machine "STEFANI" and "TOMASSINI" handling. SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Mod. KAL 310 with "NARDELLO" Mod. Elegance splitter. SZ0M35-36) Drilling machine "BIESSE" Techno Logic with infeed and stacker "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling "RBO-BIESSE" SZ0M37) CNC machining centre "MORBIDELLI" Mod. Author 600 KL SZ0M56) Reel slitting and rewinding machines "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Honeycomb panel preparation line Godpfx Ascr U Uroiyjub SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (mm??x mm ??). SZ0M21) Sizing and calibration line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Various other machines (VITAP drilling machine, circular saws, glue application machines, etc.), extraction system, roller conveyors, shelving (wall racks), forklift trucks, pallet trucks, and more. The machines are still installed at the user and can be inspected by arrangement.

Kondisi: sangat baik (bekas), CNC-controlled Throughfeed Boring and Dowel Inserting Line (3 machines) J06031) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal boring units (each with 2 boring heads, each 2.3 HP and each with 11 boring spindles) - No. 6 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper vertical workpiece clamps + No. 2 endless screws for chip removal J06032) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC - No. 2 horizontal boring units (each with 2 boring heads, each 2.3 HP and each with 11 boring spindles) - No. 6 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 6 upper vertical workpiece clamps - No. 2 endless screws for chip removal J06033) THROUGHFEED BORING MACHINE "BIESSE" KERNEL, with CNC Guedpfxog Urn Ee Aiyeb - No. 4 lower boring units (each with 2 split and reversible boring heads, each 2.3 HP and each with various boring heads) - No. 4 upper vertical workpiece clamps - No. 2 endless screws for chip removal CNC control (Software: Tooling System + Woodmaster) CNC controls movement (X-axis and Hv) of the 2 horizontal boring units CNC controls movement (X-axis) of vertical boring units CNC controls movement (Y1 and Y2 axes) of drilling units + (Y-axis) of stops CNC controls movement (X-axis) of workpiece clamps CNC controls movement (X-axis) of conveyor belts

Kondisi: sangat baik (bekas), CNC-controlled flexible automatic through-feed drilling and dowel insertion line Min/Max workpiece (panel) width (X axis) with FTT: 240 / 3100 mm Min/Max workpiece (panel) thickness (Z axis) with FTT: 12 / 60 mm Min/Max workpiece (panel) length/depth (Y axis) with FTT: 140 / 1550 mm (or 800+800) A) Loading station (double-station gantry loader) "RBO" Mod. Advantage C B) Inclined roller conveyor "RBO" with workpiece turning device (longitudinal-transverse) 90° Gsdpfx Asgvdkgsiyoub C) Gantry CNC-controlled dowel hole drilling machine "BIESSE" FTT 800 Center A: 2 electro spindles ISO 30 (3.7 kW each) with tool holder magazine, 3 positions each. Center B: 2 provisions for the installation of a further 2 electro spindles 2 tool holder magazines (revolver type) with 56 positions each. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) D) Transfer conveyor with turner (180°, inverts with top side facing down) "RBO" Mod. Ribaltatore E) Gantry CNC-controlled dowel hole drilling and dowel insertion machine "BIESSE" FTT 800 R8 2 horizontal units (1 left + 1 right) with 4 BH18 heads with 18 spindles each (36 right + 36 left), total 72 spindles. Center A: 2 electro spindles ISO 30 (4.5 kW each) with 3 tool holder magazines each. Center B: 2 provisions for the installation of a further 2 electro spindles 2 tool holder magazines (chain type) with 60 positions each. 4 upper drilling units (total 128 vertical spindles + 36 horizontal spindles) F) "BIESSE" RD dowel insertion unit 2 horizontal units (1 right + 1 left) with 5 insertion nozzles each (5 left + 5 right), total 10 nozzles G) Stacking station (double-station gantry) "RBO" Mod. Advantage SC

Kondisi: sangat baik (bekas), SINGLE-SIDE DESTACKING STATION - Upper crossbeam movable by 180° (horizontal) - Console table with vacuum clamps - Lift platform (internal) with motorized sheet metal roller conveyor Guedpfx Aisd Tyvxoyob - Front safety guard, movable - Separate control cabinet and control panel - External roller conveyor for the stack of sheets from destacking - External driven roller conveyor from destacking, optionally with belts for transfer at 90° of the sheets - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm 10 - 40 - Min. sheet dimensions mm 250 x 320 - Max. sheet dimensions mm 1200 x 3000 - Total connected load kW 11

Kondisi: sangat baik (bekas), Double-sided EDGE BANDING AND FORMATTING MACHINE (1st and/or 2nd machine in-line) Edge material (rolls) thickness (min/max) mm: 0.3 – 3 Panel thickness (min/max) mm: 10 – 60 Working width (min/max) mm: 240 – 2700 Control / Software: SINITRA Feed speed (adjustable) m/min: 10 – 40 (INVERTER C.N.) Cam interval (mm): 500 FORMATTING UNIT (for each side): Protection cutter (pre-milling) AS 10 (5.8 kW) 2 x Hoggers DT 10 (5.8 + 5.8 kW) Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): Gluing unit (hot melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) Edge pressure section (CNC controlled). Edge magazine for rolls (6-fold) Gedpou Tg Uqsfx Aiyoub Trimming unit IT 90-S (0.3 kW x 2) 28m/min. 0 – 25°. PNEUMATIC CNC controlled multi-profile milling unit RF 30 (0.65 kW x 2) 0 – 25° Multi-function unit (radius and contour milling unit) AR 80 (0.3 kW x 2) 25 m/min – ROTAX Spindles with automatic tool change (tools with 8+8 positions) CNC controlled multi-profile scraping unit RB 30 Flat scraping unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for boards (useful height mm 80) as buffer to accelerate the working cycle

Kondisi: sangat baik (bekas), Complete factory for furniture production, comprising: KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel inserting machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side moulding and edge banding line "HOMAG", comprising: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° transfer unit (longitudinal/transverse) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° transfer unit (transverse/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC line for drilling, milling, and hardware insertion, consisting of: Carousel loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfer modules KZ2090) Wide-belt sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with automatic infeed and stacking system "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with through-feed carcass press KZ2203) Sawing line "SALVADOR" (panel cross-cut + splitter) with stacking system "ESSE2" KZ2009) Veneer department (double-knife veneer bundle guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; veneer splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) Gedpfx Aieh T Dvtjyjub KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate applications KZ2215) Automatic panel storage system "ESSE2" Mod. MAGAZZINO No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, glue application machines, etc.), extraction systems, roller conveyors, shelf systems (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user's site and can be inspected by appointment.

Kondisi: sangat baik (bekas), Double-Sided FORMAT & EDGE BANDING MACHINE (First machine in a production line) Edge Material (Rolls) Thickness (min/max) mm: 0.3 - 3 Panel Thickness (min/max) mm: 10 - 60 Working Width (min/max) mm: 270 - 1200 Control System / Software: SINITRA Feed Speed (adjustable) (m/min): 10 - 40 (INVERTER C.N.) Safety and Noise Protection: Enclosed cabin Side Adjustment of Aggregate Carrier: Manual FORMATTING UNIT (for each side): 2 x DT 10 Pre-milling Units (5.8 kW each) Free space for jointing unit FS Jointing Unit ES30 + ER30 (5 kW each) 0° - 90° Universal Milling Unit Softforming SF 10 (2 x 2.4 kW) 0° - 45° Spraying Unit (for liquid release agent) EDGE BANDING SECTION (for each side): Gluing Unit (Hot Melt Adhesive + Pre-melter) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Preheating Unit RP 10 Edge Pressure Zone (CNC-controlled) Pressure Roller Track (revolver) for Straight Edges and Softforming (softforming) Soft PF40 (4 Pos.) mm 800 (Guillotine CI10+CS10+RL10) - Edge Magazine for Rolls (6 positions) Milling Unit RS 10 (2 x 1.3 kW) Milling Unit Softforming RF 10/SF (2 x 0.65 kW) Gsdpfx Ast N Ix Rjiysub Multi-profile Milling Unit RF 30 (2 x 0.65 kW) Universal Milling Unit for Grooving/Rebating and Profiling FB 30 (2 x 4.5 kW) 0° - 90° Multi-profile Scraper Unit RB 30 Flat Scraper Unit RC 05 / Soft Spraying Units (for polishing liquid) + Buffing Unit SZ 30 (2 x 0.37 kW)