Beli Binzel-Abicor Kohleelektroden 50 Stück bekas (35.934)

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: nvt, berat keseluruhan: 25 kg, Brand new filling machine / dosing machine suitable for filling liquids, pastes, creams, oils, etc. This machine can handle almost any liquid as well as thicker substances. Examples include: - Shampoos - Creams - Honey - Jam - Milk - Yoghurt - Water - Alcohol - Pesto Lasdpfx Acerivv Ee Hjf - Disinfectant - Etc. This is a very robust machine made from high-quality stainless steel, operated by compressed air and 220V power supply – truly Plug and Play! Ideally suited for filling small batches. A very small compressor is sufficient to operate this machine; we can supply one if required. We recommend at least a 12L version. The filling machine is equipped with a 500ml cylinder, enabling a max fill of 500ml per stroke. Multiple strokes can be set for larger volumes, for example, to fill 750ml you can use 2 x 375ml strokes. The smallest filling volume per stroke is 50ml; all quantities between 50ml and 500ml can be filled in a single stroke. We also have a model with a 100ml cylinder, which can fill between 5ml and 100ml per stroke. We would be happy to provide more information upon request. A large 25L hopper is mounted on the machine; optionally, it is possible to connect directly to an IBC container or a 200L drum, enabling even faster operation when handling large quantities. The machine is equipped with both a foot pedal and an automatic mode. In automatic mode, the machine will continuously fill – enabling rapid processing of larger batch sizes. The filling speed can be adjusted. With the foot pedal, filling is done at your own pace. Depending on the operator and the volume per fill, 15-25 units per minute can be filled, making this a very fast machine. The machine weighs approximately 15-20kg and can be easily placed on a tabletop. Fully constructed from stainless steel, this is a top-quality professional unit. If you have any questions, please email us – we are happy to assist you with this or other machines. We also offer a label applicator that pairs very well with this filling machine. We aim to respond within 24 hours. You can also reach us by phone. We are available on weekdays from 08:30 to 17:00.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: Laodpefdkb Tefx Ac Hef - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay distance - Incl. mounting hardware (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and system can be expanded at any time) - (*Larger quantities available: approx. 90 uprights in stock) Ljdpfxjd Tbbdj Ac Hoaf Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Incl. mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notice. The material is packed sensibly to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The ground must be concrete, level, suitable for doweling, and capable of bearing the imposed loads. The customer is responsible for verifying and ensuring ground conditions, load capacity, and any necessary official permits. Uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm upright top projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used Cantilever Racking: Bolted System, Hot-dip Galvanised Version Scope of delivery: - 4 rack uprights, height 4,160 mm, with base section, usable depth 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction from IPE sections (bolted system) - Surface hot-dip galvanised - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity plates C4 according to DIN standard - Specialist telephone advice - Made in Germany - Short delivery times Lasdod Tqaljpfx Ac Hof - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is packed efficiently for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for doweling, and capable of bearing all applied loads. The customer is responsible for checking and ensuring the substrate condition, bearing capacity, and obtaining any necessary official approvals. Uprights are to be anchored to the ground by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, uprights should have at least 500 mm clearance above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Laedpjfdkb Uefx Ac Hjf Including longitudinal and diagonal bracing for 1,300 mm upright distance Including fastening material (floor anchors not included) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and expansion always available on request) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Includes fixing material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Pickup on site possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight forwarding with prior notification before delivery. Materials are packaged for easy unloading. When installing outdoors, load capacities are reduced by wind and snow load. The foundation must be concrete, level, and suitable for dowelling as well as capable of bearing the applied loads. The substrate condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and is not recommended. According to professional association guidelines, it is recommended that the rack uprights have at least 500 mm projection above the uppermost storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, de-to-en-001 Ljdsguk A Hopfx Ac Heaf

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Cantilever racking used: Bolt system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 3,000 mm, with foot section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard type - Including longitudinal and diagonal bracing for 1,300 mm center distance - Including mounting hardware (excluding floor anchors) * (Delivery time approx. 1 week) * (All parts undamaged!) * (Spare parts and extensions available at any time) * (Bulk offer available: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt assembly) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay distance - Rack length = 4,000 mm - Including mounting hardware (excluding floor anchors) - Includes assembly instructions and C4 load rating labels according to DIN standard Ljdpfeguk Dkex Ac Hjaf - Expert technical advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight forwarding services with advance delivery notification. The material is securely packed to enable easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for dowel anchoring, and able to support the expected loads. The client is responsible for verifying and ensuring substrate conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be secured to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, the rack uprights should extend at least 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including bracing sets (longitudinal and diagonal) for 1,300 mm upright spacing - Including fastening material (without floor anchors) Ljdpfx Asfdkbhec Hsaf - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reordering and extension possible at any time) - (Offer also available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Including assembly instructions and load plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with notification prior to delivery. The material is packed in a practical way to enable easy unloading. Please note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for dowelling, and must be able to accommodate the acting loads. The customer is responsible for verifying ground condition, load-bearing capacity, and any required official permits. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German trade association recommendations, rack uprights should extend at least 500 mm above the uppermost storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 upright frames, 2,600 mm height with 1,000 mm base segments - 12 cantilever arms, 1,000 mm depth, standard version - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and expansion available at any time) - (*Offer available in larger quantities: approx. 90 upright frames in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base segments and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Lsdpfx Acoguk Dve Hjaf - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable shipping with advance delivery notice. Material is packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and capable of withstanding the applicable loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Wall anchoring is neither necessary nor recommended. According to occupational safety guidelines, it is recommended that the upright frames have at least a 500 mm projection above the top storage level.

Kondisi: sangat baik (bekas), 3 buah Lsdpfx Acew E Hicj Heaf Adaptor chuck penjepit dengan tangkai 20mm, setara dengan 3R-653 Mini holder Chuck Adapter 3R-653 untuk tangkai 20mm Termasuk batang penarik Setara dengan: Adaptor chuck manual, Macro-Mini, 3R-653 Termasuk 3 batang penarik 3R-605.1E Harga per buah: €200

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, DEMAG Kranhimmel KBKII-R, sistem derek overhead crane, crane bengkel, travelling crane Harga baru: lebih dari €40.000,00 dengan pergantian rel sisi kiri (manual), Artikel No. 87396344 (sendiri senilai €11.000,00 netto harga baru) 6x rel lurus 6m 2x 5m 4x 2m 3x 1,5m (total 60 meter rel lurus dengan jalur listrik terintegrasi di dalam, tidak perlu kabel seret!) 2x tikungan 90 derajat KBKII-R Lasdpfx Ajv Uvdpoc Hjf termasuk semua bagian yang diperlukan seperti trolley, gantungan, klem, dll. Opsi: 4x DEMAG Electric Chain Hoist PK5 N-F 500kg, 2 kecepatan (termasuk dalam sistem, namun tidak mengikat), kondisi sangat baik Sistem dalam kondisi teruji dengan buku pemeriksaan, sepenuhnya fungsional, siap pakai Info: lebih dari 20.000 suku cadang DEMAG tersedia di gudang! Lihat juga penawaran lain dari stok saya!

Kondisi: bekas, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential properties, small businesses, or agricultural applications. It is suitable for operation with wood chips and pellets, offering modular output and fully automatic operation in a space-saving design. ⸻ Key Features: 🌲 Fuel: Wood chips or pellets ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, feeding, and cleaning 🔧 Compact design – ideal for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility. TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock Lajdpfx Aswahhvec Hef We are a family business with around 20 years of experience in heating technology, operating a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major town on the Hungarian side after the Austrian border. 🔥 Our inventory includes, among others: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Auger conveyors • Fuel extraction systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and Components: We also offer a wide range of accessories, including circulation pumps, plate heat exchangers, and many other components – from domestic applications up to industrial scale. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Much of our current range can be found on our website: topheatingsystems.com We also have additional units that have not yet been listed. 📅 Inspection: An inspection at our warehouse is possible by prior appointment. If you are interested, please feel free to contact us – we will help you find the right solution.

Tahun pembuatan: 2003, Kondisi: sangat baik (bekas), 7 units MOTAN material containers for dryers, 200 liters capacity each, including heating units, year of manufacture approx. 2003. The containers each have their own temperature controller. 8 units available, currently in stock: 7 units. Lasdpfx Aefwx Ebsc Hof

Tahun pembuatan: 2025, Kondisi: baru, Gravity belt filter system – new – electrically and mechanically prewired, plug-and-play, suitable for JUNG HF50 / JF520 / JF625 Ledpohcn I Tofx Ac Heaf - Please specify the machine type when making an inquiry -

Tahun pembuatan: 2021, Kondisi: diremajakan ulang (bekas), Used grinding wheel holder for JUNG HF50 / JF520 / JF625 - cleaned and inspected - Lsdpfehcn I Esx Ac Heaf

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: GE-50RAY, tegangan masuk: 230 V, jenis arus masuk: Arus searah (DC), daya laser: 50 W, jenis pendinginan: udara, lebar total: 530 mm, tinggi total: 770 mm, panjang total: 796 mm, berat keseluruhan: 254 kg, masa garansi: 36 bulan, jenis penyesuaian ketinggian: listrik, lebar bukaan pintu: 530 mm, tinggi bukaan pintu: 300 mm, panjang meja: 203 mm, lebar meja: 430 mm, panjang gelombang laser: 1.064 nm, frekuensi input: 100 Hz, Perlengkapan: kabin, Take advantage of this opportunity and secure your 50-watt, 100-watt, or 200-watt fiber laser! For further information or a tailored offer, we are happy to assist you. Contact us today to learn more about the benefits of these outstanding products. We offer brand-new fiber lasers with German user software and operating instructions. These units are extremely easy to operate and ready to use immediately, with no programming knowledge required. Our Services: - Personal delivery and installation - On-site or remote commissioning and user training - Ongoing support for questions or issues - Service and spare parts supplied directly from Germany Technical Specifications (depending on the model): - Laser power: 50 watts, 100 watts, or 200 watts - Wavelength: 1064 nm - Frequency range: 20–100 Hz - Marking field size: 150x150 mm (options: 50, 70, 110 mm scan head) - Repeatability: ± 0.003 mm - Engraving speed: ≤ 7000 mm/s - Marking software: EZCAD in German/English - Pilot laser: Easy preview - Laser Class: 1 - Operating temperature range: 14–30°C - Focusing: Electric column with motor control - Max. workpiece height: approx. 300 mm - Connection: 230 V - Cooling: Air-cooled - Weight: approx. 170 kg (depending on model) - Operating costs: Low - Lifespan: Over 100,000 maintenance-free operating hours - Features: Grid drill holes for fixtures - Material compatibility: Marking of a wide range of materials Included: - 150x150 mm head, other sizes available - CE declaration of conformity - Warranty - Service - German software - Training for machine and software - Invoice Scope of Delivery: - USB cable - Power cable - Stops - USB stick with parameters - Operating manual in German - Foot pedal - Safety glasses Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets, and image engraving. Our fiber lasers are ideal for engraving and annealing metals as well as marking or decorating plastics and coated materials. Software: Lsdpfju Tkclox Ac Hsaf - EZCad 2.14.0 in German - Compatible file types: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We perform all service ourselves and have the largest stock of spare parts directly in Germany, ensuring quick and efficient support. Shipping and Installation: With shipping, we provide remote setup and a brief introduction. Alternatively, we offer personal delivery, on-site installation, setup, and user training. Pricing depends on postal code. Consultation: For detailed advice, visit our website or call us directly. We are happy to answer any questions you may have. Additional Options: Models with 100 watts and 200 watts are also available upon request—ideal for larger projects or increased requirements for power and speed!

Kondisi: bekas, de-hu-it-lt-001 Ledpfxsyqvhke Ac Hoaf

Kondisi: bekas, sk50-aufnahme-mit-werkzeugen Lsdpjyq Sw Uofx Ac Heaf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Pusat Mesin Universal Ljdpfxozvlglj Ac Hjaf 5 sumbu simultan DMG DMU 50 Tahun 2018 Rentang pergerakan X500 Y450 Z400mm Heidehhain iTNC530 Meja Putar yang Dapat Diputar Ø630x500mm Sumbu B NC -5 hingga 110 derajat Sumbu C NC 360 derajat x 0,001 Spindel 18.000 rpm ATC 16, kerucut SK40 Pengukuran Langsung sumbu X, Y & Z Roda Tangan Elektronik

Kondisi: bekas, Tahun pembuatan: 2014, Fanuc M-710iC/50 dengan R-30iB Fanuc M-710iC/50 adalah robot industri serbaguna berkapasitas sedang yang dirancang untuk kinerja kecepatan tinggi dan fleksibilitas. Dipadukan dengan kontroler R-30iB, solusi ini menawarkan performa tangguh untuk aplikasi mulai dari penanganan material, perawatan mesin, hingga pemolesan. Spesifikasi: - Sumbu Terkontrol: 6 - Jangkauan Maksimal: 2050 mm - Kapasitas Angkut Maksimal: 50 kg - Bobot (Lengan): ± 560 kg - Rentang Gerak (J1): 360° Lasdpsyz Rfaofx Ac Hof - Kecepatan Maksimal (J1): 175°/s Aplikasi Umum: - Penghilangan material: Gerinda, deburring, dan polishing - Perawatan mesin: Memuat dan membongkar mesin CNC atau mesin injection molding - Paletisasi: Penanganan kotak atau karung hingga batas 50 kg - Perakitan: Penempatan komponen secara presisi pada lini manufaktur otomotif atau umum

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, daya: 460 kW (625,43 hp), jenis bahan bakar: listrik, Tahun pembuatan: 2026, Henan Mingyuan Heavy Industrial Equipment Co., Ltd. hat sich als führender globaler Hersteller etabliert und bietet integrierte Sand- und Kiesproduktionslinien, die Rohmineralien in präzise klassierte Endprodukte umwandeln. Eine MINGYUAN-Produktionslinie ist nicht bloß eine Ansammlung einzelner Maschinen, sondern ein aufeinander abgestimmtes System – konzipiert für maximalen Durchsatz, minimale Verluste und niedrige Betriebskosten. 1. Kernausrüstungskonfiguration Das MINGYUAN-System arbeitet nach einem mehrstufigen Zerkleinerungsprinzip zur Sicherstellung optimaler Kornform sowie Produktqualität: Lodpfxoq Nywxe Ac Heaf • Vibrationsvorschubgerät (GZQ-Serie): Sorgt für einen kontinuierlichen und gleichmäßigen Materialfluss zum Primärbrecher. Mit integrierten Grob-/Stababweisern (Grizzly Bars) zum Vorabsieben von Erde und Feinteilen, schützt es den Brecher vor unnötigem Verschleiß. • Backenbrecher Primär (PE/C-Typ): Die „Arbeitspferde“ für die erste Zerkleinerungsstufe von Hartgesteinen (wie Granit, Basalt, Flusskiesel). Backenbrecher von MINGYUAN verfügen über eine Tiefen-Hohlraumkonstruktion für besonders hohe Brechungsverhältnisse. • Sekundärbrecher (Prall-/Kegelbrecher): – Prallbrecher (PF-Serie): Insbesondere für mittelharte Materialien geeignet, produziert er hochkubische Endprodukte mit exzellenter Kornform. – Kegelbrecher (hydraulisch/Feder-Ausführung): Bevorzugt bei sehr harten Stoffen (z.B. Granit/Quarz) aufgrund hoher Effizienz und geringem Verschleißteilbedarf. • Sandherstellungsmaschine (VSI-Serie): Der „Finisher“. Arbeitet im „Stein-auf-Stein“- bzw. „Stein-auf-Eisen“-Verfahren zur perfekten Kornformung und Herstellung hochfeinen Industriesandes. • Vibrationssieb (YK-Serie): Hochfrequenz-Rundsieb zur Klassifizierung in verschiedene Fraktionen (z.B. 0–5 mm, 5–10 mm, 10–20 mm, 20–40 mm). • Sandwaschmaschine (XSD/LSX-Serie): Entfernt Schlamm und Verunreinigungen, sodass das Endprodukt sämtliche Beton- und Asphaltstandards erfüllt. 2. Technische Daten & Leistungsmerkmale MINGYUAN bietet skalierbare Lösungen passgenau auf die Projektgröße – von kompakten Mobilanlagen bis zu großindustriellen stationären Werken. | Merkmal | MINGYUAN Standardspezifikationen | |-----|----- | | Produktionskapazität | 50 – 600 t/h (Tonnen pro Stunde) | | Maximale Aufgabekörnung | Bis zu 1.100 mm (modellabhängig beim Backenbrecher) | | Endkornfraktionen | 0-5 mm, 5-10 mm, 10-20 mm, 20-40 mm (anpassbar) | | Antriebssystem | Effiziente Drehstrommotoren oder Diesel-Elektro-Hybrid | | Steuerung | Zentrales SPS-Steuerpult mit Sicherheitsverriegelungen | | Verarbeitbare Materialien | Flusskiesel, Granit, Kalkstein, Basalt, Eisenerz, Bauschutt | 3. Das MINGYUAN-Technologievorsprung Was MINGYUAN am Weltmarkt unterscheidet, ist der „One-Stop“-Ansatz: 1. Hohe Brecheffizienz: Optimierte Brechkammern vergrößern die Kontaktfläche zwischen Material und Verschleißteilen, senken den Energieverbrauch pro Tonne deutlich. 2. Umweltkonformität: Optional mit fortschrittlicher Staubbindungs-Vernebelung und vollkommen gekapselten Förderbändern, um auch strengste Umweltauflagen in urbanen Regionen zu erfüllen. 3. Langlebigkeit: Verschleißteile (Backenplatten, Schlagleisten, Brechermäntel) werden aus hochmanganhaltigen und hochchromlegierten Stählen gefertigt und sorgen so für deutlich verlängerte Wartungsintervalle. 4. Flexible Layouts: Ob Steinbruch in Hanglage oder innerstädtische Recyclingfläche – MINGYUAN erstellt individuelle CAD-Anlagenlayouts zur Optimierung von Schwerkraftflüssen und

Kondisi: baik (bekas), Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Pengumpan lembaran otomatis A-20-P (plat penumpuk, kepala vakum Mabeg, kontrol lembaran ganda, meja sabuk vakum) Unit pelapisan otomatis EK 102 (pelapisan basah dan pelapisan termal) Unit pemisah: rol pemisah Penyusun tumpukan: meja getar Ukuran: 1020 x 1140 mm Lajdjzvwkvspfx Ac Hjf Kondisi: telah dibersihkan

Kondisi: baru, Tahun pembuatan: 2025, Diatomit-Brecher und Reinigungsmaschine Nach dem Reinigungsprozess beträgt der Reinheitsgrad weißer Diatomit mit einem SiO2-Gehalt von über 90 %, Al2O3 unter 0,04 % und Fe2O3 unter 0,4 %. Lajdpfoq Nx E Sjx Ac Hof

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, Für das Zerkleinern von Dolomit- und Phonolithgestein können je nach den Gesteinseigenschaften und den gewünschten Endprodukt-Spezifikationen verschiedene Arten von Brechanlagen eingesetzt werden. Nachfolgend finden Sie gängige Brechertypen, die sich zur Aufbereitung von Dolomit und Phonolith eignen: 1. Backenbrecher: Lsdpfx Ajq Nyuvoc Hjaf - Backenbrecher werden häufig für die Vorzerkleinerung eingesetzt und sind für harte und abrasive Materialien geeignet. Sie können sowohl Dolomit- als auch Phonolithgestein zuverlässig verarbeiten. 2. Prallbrecher: - Prallbrecher sind vielseitig einsetzbar und eignen sich sowohl für die Vor- als auch für die Nachzerkleinerung. Das Material wird mittels Schlagleisten oder Prallhämmern zerkleinert, was ein hohes Zerkleinerungsverhältnis bewirkt. Prallbrecher sind besonders effektiv zur Kornformgebung. 3. Kegelbrecher: - Kegelbrecher werden überwiegend zur Sekundär- oder Tertiärzerkleinerung eingesetzt. Sie sind für die Verarbeitung härterer Gesteine geeignet und liefern gut geformte, feinkörnige Zuschlagstoffe. 4. Kreiselbrecher: - Kreiselbrecher finden vor allem bei großvolumigen Vorzerkleinerungsprozessen Anwendung. Mit ihrem konusförmigen Kopf sind sie besonders für abrasive Materialien geeignet, jedoch weniger gebräuchlich als Backen- oder Kegelbrecher. 5. Vertikalprallbrecher (VSI-Brecher): - VSI-Brecher eignen sich zur Kornformgebung und Herstellung von Brechsand. Das Material wird durch Prall gegen Ambosse oder Prallplatten aufgeschlossen. 6. Hammerbrecher: - Hammerbrecher werden für die Zerkleinerung von weicheren Materialien verwendet und können für Gesteinsarten wie Phonolith geeignet sein. Die Zerkleinerung erfolgt durch Schlagwirkung, wobei das Gestein entlang natürlicher Bruchlinien versagt. 7. Walzenbrecher: - Walzenbrecher werden zur Größenreduzierung spröder Materialien eingesetzt. Das Material wird zwischen zwei gegenläufig rotierenden Walzen zerkleinert. 8. Siebanlagen: - Nach dem Brechprozess kommen Siebanlagen, wie beispielsweise Vibrationssiebe, zum Einsatz, um verschiedene Kornfraktionen zu separieren. 9. Entstaubungsanlagen: - Brechvorgänge erzeugen Staub, daher werden Entstaubungsanlagen zur Minimierung von Umwelt- und Gesundheitsbelastungen eingesetzt. 10. Mobile Brecheranlagen: - Mobile Brecher, einschließlich raupenmobiler Anlagen, bieten Flexibilität und Mobilität und können direkt im Steinbruch oder auf der Baustelle eingesetzt werden. Bei der Auswahl geeigneter Brechanlagen für Dolomit- und Phonolithgestein sollten Sie Faktoren wie Materialhärte, geforderte Kornform und -größe sowie benötigte Durchsatzleistung berücksichtigen. Zudem empfiehlt es sich, die Zerkleinerungstechnik in ein Gesamtkonzept einzubinden, das gegebenenfalls Sieb-, Förder- und Waschanlagen umfasst, um den spezifischen Anforderungen der Anwendung gerecht zu werden.

Kondisi: baru, de Lsdpfx Acevlwqlo Heaf