Beli Brugger Power Split S14 bekas (38.941)

Tahun pembuatan: 2008, Kondisi: baik (bekas), de_hu_it_lt_lv_nb_nl_pl_MecHahnElektroSchienwagen Lsdpfxelbdlzo Aatjab

Kondisi: bekas, okuma-power-supply-5000t-glp-opus-e0451-521-037-2663 Laodpfx Aajy S Dr Ustob

Kondisi: bekas, Hydraulic Low-Profile Scissor Lift Table FLEXLIFT FLUNDER Type 1500 / 100 (without hydraulic power unit) Year of manufacture: 1991 Lsdpsl Nbqcjfx Aateab Rated load capacity: 1,500 kg Lifting capacity (practically tested): 1,000 kg (at approx. 350 bar) Platform size: 2,100 x 1,400 mm Lift height (max): 930 mm Lowered installation height: 100 mm (with mounting frame) Raised installation height: 1,030 mm Hydraulic operating pressure: 350 bar = lifting capacity 1,000 kg Hydraulic motor power: 1.5 kW Power connection: 400 Volt, 50 Hz - Mechanical-hydraulic safety limit switches stop lowering when the safety bar is activated - Without hydraulic power unit - Without electric control unit Mounting frame length: 2,270 mm Mounting frame width: 1,580 mm Mounting frame height = installation height (lowered): 100 mm Net weight of lift table: 500 kg Good condition

Kondisi: bekas, Pneumo-hydraulic Cylinder TOX Pressotechnik Hydro-pneumatic press, Power Package Type: S 04.00.050.12 D Serial No.: 208696.460 Year of manufacture: approx. 2000 Lodpfx Aasu D Tz Ujtjab Pressing force: 4.0 t at 10 bar Pressing force: 3.0 t at 8 bar Pressing force: 2.6 t at 7 bar Pressing force: 2.4 t at 6 bar Pressing force: 2.0 t at 5 bar Pressing force: 1.6 t at 4 bar Pressing force: 1.2 t at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Piston rod thread: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with digital display TOX for force measurement, Type 167282 - Overall height power package with piston rod = 610 mm - Overall height power package hydro-pneumatic cylinder = 560 mm - Additional base plate 160 x 160 x 20 mm - Ram plate: Ø 68 mm Space required (L x W x H): 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 units available, price per unit.

Kondisi: bekas, Hydraulic Power Unit, Silent Power Pack BOSCH REXROTH Hydraulic Power Unit Type: UPE 5- /1.50V7/06-10A-H-1-S090+04100891 Serial No.: R904100893 / 480933 10 Year of construction: approx. 2010 Pressure capacity: 55 bar Delivery rate: 13 L/min Tank capacity: approx. 20 liters Motor power: 1.5 kW Speed: 1440 rpm Mains connection: 400 Volt, 50 Hz - The unit was operated at a working pressure of approx. 80 bar - 1 piece hydraulic pump, vane pump BOSCH REXROTH, type PV7-11/06-10RA0MA0-10, max. pressure: 100 bar - 1 piece air-oil cooler, fan cooling driven by electric motor from hydraulic pump - Hydraulic manifold BOSCH REXROTH, type UPES-11/ ABZSS6-C-140E-S30-S13 Lsdjv Ev Dqjpfx Aatjab - 2 pieces hydraulic accumulators - 1 piece replaceable filter cartridge - 1 piece pressure sensor IFM, type TR7 430 - 1 piece oil sight glass - Hydraulic connections 2x 18L - Supplied without oil content Space required (L x W x H): 700 x 450 x 850 mm Weight: 105 kg Very good condition

Kondisi: bekas, Catu daya dan penggerak Indramat Lasdpoxrf Twsfx Aatsb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 8.948 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 9.500 rpm, panjang pemakanan sumbu X: 470 mm, panjang umpan sumbu Y: 330 mm, panjang umpan sumbu Z: 660 mm, jenis arus masuk: tiga fasa, diameter roda gerinda: 200 mm, berat keseluruhan: 4.500 kg, panjang penggilingan: 350 mm, kecepatan pemakanan sumbu X: 15 m/menit, laju pemakanan gandar Y: 15 m/menit, laju pemakanan sumbu Z: 15 m/menit, daya motor spindle penggiling: 11.500 W, tegangan masuk: 400 V, tahun perombakan terakhir: 2026, CNC-Werkzeugschleifmaschine WALTER Helitronic Power TECHNISCHE DATEN: Baujahr: 2008 CNC-Steuerung: FANUC Series 31i-Modell A5 Installierte Software: Tool Studio 3 Achszahl: 5 Spitzenhöhe: 145 / 190 mm Verfahrweg X-Achse: 470 mm Eilgang X-Achse: 15.000 mm/min Verfahrweg Y-Achse: 330 mm Eilgang Y-Achse: 15.000 mm/min Verfahrweg Z-Achse: 660 mm Eilgang Z-Achse: 15.000 mm/min Schwenkbereich A-Achse: 360° Schwenkbereich C-Achse: +/-200° Max. Werkstücklänge (Stirnschleifen): 280 mm Max. Schleiflänge: 350 mm Max. Schleifdurchmesser: 320 mm Max. Schleifscheibendrehzahl: 9.500 U/min Leistung Schleifspindelmotor: 11,5 kW Max. Schleifscheibendurchmesser: 200 mm Betriebsstunden unter Strom: 8.948 h Kühlmittelpumpendruck: 7 bar Kühlmittelpumpe Fördermenge: 120 l/min Schmiermitteltankinhalt: 400 l Versorgungsspannung: 400 V Gesamtanschlusswert: 25 kVA Gewicht: 4.500 kg IM LIEFERUMFANG ENTHALTEN: 1x TOOLSTUDIO 3 Software 1x Direktantrieb A-Achse (Hohlwelle) 1x Automatisches Werkzeugspannsystem 1x RENISHAW LP2 Messtaster 1x DSL Air Technology Typ AES-GAMMA 30 Nebelabscheider 1x Schmierstofftank + Papierfiltersystem 1x GRUNDFOS Kühlmittelpumpe 35x Schleifscheibenaufnahmen (bestückt mit CBN-Scheiben) Lsdpfx Aajy Sxrpjtjab 22x ISO50-Aufnahmen 1x SCHUNK Spannzangenaufnahme 22x Spannzangen 1x NIKKEN Spannzangenaufnahme 13x NIKKEN Spannzangen 1x Metallregal für Schleifscheibenaufnahmen und ISO50-Aufnahmen 1x ISO50 Justierdorn zur Achsvermessung 1x Kalibrierscheibe zur Achsvermessung 1x Satz Servicewerkzeuge Diverse technische Handbücher Die Maschine kann nach Terminabsprache unter Strom besichtigt werden. Preis auf Anfrage, Verladung auf LKW inklusive. Weltweiter Versand möglich. Die Angaben auf dieser Seite wurden nach bestem Wissen gemacht. Für die Genauigkeit der Daten kann keine Gewähr übernommen werden. Maschine zum Nachschärfen von Werkzeugen, Fräsern, Gewindebohrern und Bohrern. Vergleichbar mit Marken wie Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Siehe auch Rund- und Flachschleifmaschinen, Drehmaschinen, Bearbeitungszentren und Fräsmaschinen.

Kondisi: bekas, okuma-power-supply-5000t-ghp-opus-e0451-521-038-03487 Lajdpfxey Suyvj Aatjb

Kondisi: baik (bekas), Hydraulikaggregat, Gebrauchtmaschine Abmessungen (L x B x H): 750 x 500 x 1210 mm Gewicht: 314 kg Elektrische Daten: 400 V; 7,5 kW; 14,8 A Maximaler Betriebsdruck: 160 bar Laodpfsuzigbjx Aatjb

Kondisi: baik (bekas), Manufacturer: Engel/Bosch Ljdpsiy Ddfsfx Aatsab Operating pressure: 280 bar Capacity: 65 l/min Dimensions: 1800 x 800 x 700 mm Voltage: 380 V Electric power: 15 kW

Kondisi: bekas, Mesin press, REMS Power-Press XL ACC, peralatan bekas Lodpfoxlp T Iox Aatoab Produsen: Rems Tipe: Power-Press XL ACC Rentang penekanan: Ø 10 – 108 mm (hingga 110 mm) Gaya tekan: 32 kN Motor: motor universal 450 W Daya listrik: 230 V atau 110 V, 50–60 Hz Berat: sekitar 5,5 kg Dimensi (T x L x P): 800 x 335 x 230 mm Panjang kabel: 2900 mm Aksesori: lebih dari 400 tipe rahang press REMS, adaptor untuk produsen lain Fitur tambahan: Retraksi otomatis (Automatic Circuit Control – ACC) Pengunci rahang press yang dapat diputar dengan kunci otomatis Kompatibel dengan rahang press dari produsen lain Proses press cepat, contoh: sambungan Geberit Mapress stainless steel Ø 108 mm dalam 15 detik Rahang press: 76,1; 88,9; 108 mm

Kondisi: bekas, de-to-hu-it-lt-lv-nb-nl-pl-20240614-1 Lasdjx R Ttljpfx Aatob

Kondisi: bekas, Pressure: 100 bar Capacity: 2 L Laedpfxowdun Do Aatob Motor: 0.75 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 4.500 h, tegangan masuk: 400 V, jarak pergerakan sumbu X: 700 mm, jumlah slot dalam magazin alat: 21, produsen pengendali: fanuc, model controller: 31i model B5, pergerakan cepat sumbu Z: 60 m/menit, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, hidung spindel: BT 30 big plus, kecepatan spindel (maks.): 10.000 rpm, jam operasional spindle: 4.500 h, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, FULLY EQUIPPED TAPPING CENTER Ljdpfx Aaeuby Sxoteab High torque/power version, equipped with: - Spindle taper with BIG PLUS interface - FANUC DDR-T: full 4th axis (direct drive motor) with braked tailstock and plate - Rotary joint for hydraulic supply to the center of the table (for automatic clamping/unclamping of workpieces) - Hydraulic unit for workpiece clamping - High-pressure through-spindle coolant - Belt-type chip conveyor - Automatic side door - Robot interface - RENISHAW TS-27 tool presetting system Machine in perfect condition with only 4,500 spindle hours!

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: 33701917A, de-1 Laedpstr Iv Tofx Aatob

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: 34062117A, de-1 Laodpjtr Irdjfx Aatjb

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: 33891917A, de-1 Lajdpjtr Irhefx Aatob

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: 34102117A, de-1 Laodpfxetr Irws Aatob

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: 34052117A, de-1 Lajdpfxstr Iwms Aatsb

Kondisi: sangat baik (bekas), 3HAC029818-001 DSQC663 HV MDU Unit Daya PENGEMBANGAN GSG ROBOTICS Lodoyl Avwspfx Aateab GSG Robotics GmbH, didirikan pada tahun 2005 di Gütersloh, sejak 2015 berbasis di Marl dengan area layanan luas untuk pemeliharaan dan perbaikan robot. Selama bertahun-tahun, kami telah berkembang menjadi mitra menyeluruh untuk semua urusan terkait robot industri dan teknologi otomasi. Kami adalah penyedia layanan penuh untuk dua produsen robot terkenal, ABB dan Fanuc.

Kondisi: bekas, Three-phase power meter for current, voltage, and power measurement; suitable for long-term monitoring and energy measurement. 3-phase power analyzer, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power. BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency, phase sequence, energy measurement, and harmonic analysis. Display: LC multifunction display with backlight Refresh rate: approx. 2 seconds Data logger: 512 kb non-volatile memory (max. 21,000 measurements, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or AC adapter 230VAC / 12VDC (batteries not included) Voltage measurement: - 3 input channels with common N reference - Measuring range: 0 - 600 V RMS - Display range: 0 - 999.9 V RMS - Resolution: 0.1 V - Mains frequency: 50 Hz Laodpfx Aox A Imzeateb Current measurement: - Measuring range (I1, I2, I3): 3 - 999.9 A - Input I4: 3 - 250 A - Display range: 0 - 999.9 A - Resolution: 0.1 A - Clamp opening: 40 mm Active power: - Selectable display for individual input or total value - Display range: 0 - 999.9 kW - Resolution: 0.1 kW Apparent power: - Calculated from true RMS voltage and current values - Display range: 0 - 999.9 kVA - Resolution: 0.1 kVA Frequency measurement: - Measuring range: 45...80 Hz - Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps - 4 test leads with crocodile clips - RS232 adapter cable - AC adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Unit tested, fully functional. Note: The housing of 2 current clamps is damaged and the battery compartment is somewhat oxidized, see photos.

Kondisi: bekas, Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Mesin pemisah veneer FANNINGMASTER 515 dijual! Konveyor rol TERMASUK Spesifikasi veneer Lebar strip veneer (melintang urat kayu) 45 - 515 mm Laedpey Tngxjfx Aatob Panjang strip veneer (searah urat kayu) 400 - 4000 mm Ketebalan strip veneer (tergantung kualitas veneer) 0,3 - 1,5 mm Tinggi paket veneer 10 - 40 mm Kapasitas mesin Kecepatan throughput sekitar 30 m/menit Spesifikasi mesin Daya listrik 1,2 kW Udara bertekanan 6 bar Konsumsi daya Konsumsi udara bertekanan 5 NL/menit Dimensi / berat Ukuran Panjang 2360 mm Lebar 1570 mm Tinggi 1750 mm Berat bersih sekitar 1150 kg Tinggi meja kerja 900 mm

Kondisi: baru, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Demonstration machine- New: GLUJET GJ725 This offer includes an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W controller - ECO MODE energy-saving function - Jointing cutter unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifuntional milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, left-hand rotation - Diamond cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 including high-gloss package - Carbide reversible knives for scraper holder - Chip collection box for scraper unit - Buffing unit 1940 - Spray unit TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment Laedju R Sy Aepfx Aatsb - iTronic adaptive pressure and glue quantity control - Long infeed fence 1,252 mm - Motorized infeed fence adjustment - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelf board program - Flat scraper FK701 - Spray unit GM301 after pressure unit - new demonstration machine -

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2005, jam operasional: 30.408 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, lebar bukaan pengisian: 1.250 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 550 kg, berat keseluruhan: 16.000 kg, kapasitas tangki oli: 600 l, daya: 22 kW (29,91 hp), tahun perombakan terakhir: 2025, laju aliran volumetrik: 530 m³/jam, Technical Data – Baler: Manufacturer: Presona AB Model: LP 50 EH1 Year of manufacture: 2005 Operating hours: 30,408 hours (as of April) Number of bales produced: 198,059 pieces (as of April) Main press force: 50 t Specific pressure: 63 N/cm² Theoretical throughput: 530 m³/hour Throughput under operating conditions: 260 m³/hour Feed hopper dimensions: 1,250 x 1,100 mm Press chamber volume: 2.2 m³ Bale dimensions: 1,100 x 720 mm, variable length Drive power: 22 kW Tying: 5-fold vertical, fully automatic Throughput rates at bulk density of: - 30 kg/m³: 6 to 7 t/hour - 50 kg/m³: 7 to 9 t/hour - 100 kg/m³: 11 to 14 t/hour Bale density (paper/newspapers): 400 to 550 kg/m³ Hydraulic oil tank capacity: 600 l PLC control: Telemecanique TSX Micro Control panel: Schneider Magelis Transport dimensions (excluding baler): 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight (baler): approx. 16 t Condition of the Baler: The machine has been partly overhauled in our workshop and general maintenance work has been carried out. Upon completion of the refurbishment, the baler was tested during operation and is now ready for immediate sale. The following refurbishment work has been carried out: General work: - Machine cleaned, derusted, primed, partially repainted - Wire feed marks in the feed channel welded and smoothed Hydraulic unit: - Hydraulic oil tank drained, tank cleaned, refilled with new oil - Oil filter and air filter replaced - Leaking oil sight glass on hydraulic oil tank replaced - All hydraulic hoses replaced Electrics: - Program menu language set to English - Two key switches in the control panel replaced - Control cabinet replaced - Signal lamp on the control cabinet replaced - Flap limit switch replaced - Electrical system of the agitator replaced, connected, and tested Press ram: - All four rollers on the press ram removed and replaced Ledpjy R Npiofx Aatjab - Main hydraulic cylinder disassembled, overhauled, cylinder tube honed, all seals replaced, leak test conducted - All plastic wear blocks on the press ram replaced Pre-press flap: - Both bearings on the shaft of the pre-press replaced - Both hydraulic cylinders disassembled, overhauled, both cylinder tubes honed, all seal kits replaced, leak test conducted - Scraper flap on the pre-press replaced Tying system: - Two complete needles with wire redirect rollers replaced - Needles adjusted and set - All wire redirect rollers in the needle heads replaced - Twister finger replaced - Two twister shafts replaced - All 8 wear plates on the twister, under the twister fingers, replaced Scope of delivery: Only the baler is being sold. All documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is fully available. Inspection possible by appointment. We do not accept liability for the technical information and possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jam operasional: 5.065 h, Fungsionalitas: berfungsi sepenuhnya, daya: 901 kW (1.225,02 hp), tinggi total: 2.990 mm, panjang total: 12.000 mm, lebar total: 2.990 mm, bahan bakar: gas rumah tangga H, Perlengkapan: dokumentasi / manual, Zum Verkauf steht ein Erdgas-Blockheizkraftwerk in Containerbauweise sowie ein Kamin mit 3 Zügen: Kurzbeschreibung: CONTAINER BHKW 901 kWe / 928 kWth Gasmotor: Jenbacher J 412 GS-B06 Generator: 400V / 50 Hz / STAMFORD PE 734C Lodpevuz Utsfx Aatoab Weitere Informationen: - Komplettanlage BHKW im Container (12 x 3 x 3 m), Super Silent-Ausführung, Lackierung RAL7004, inkl. Gemischkühlung und Notkühlsystem als Tischkühler, Glykol-Außenschutzsystem, Oxidationskatalysator, vorbereitet für SCR-System, Inselbetriebsfähigkeit, Profibus DP-Schnittstelle usw. - Entsprechend technischen Zeichnungen, Plänen, R&I-Schemata und Datenblättern - Das Aggregat hat 5.056 Betriebsstunden (Laufzeit: 01/2021 - 12/2021) - Die gesamte BHKW-Anlage befindet sich in einem sehr guten Zustand – regelmäßige Wartung über Premium-Servicevertrag; aktuell durch den Hersteller eingelagert und konserviert. English Translation (professionally adapted): For sale: natural gas combined heat and power (CHP) plant in containerized design and one chimney with 3 ducts. Short description: CONTAINER CHP 901 kWe / 928 kWth Gas engine: Jenbacher J 412 GS-B06 Generator: 400V / 50 Hz / STAMFORD PE 734C Further information: - Complete CHP package in a 12 x 3 x 3 m container, super silent design, painted RAL7004, incl. mixture (combination) cooling and emergency cooling system as table cooler, outdoor glycol protection system, oxidation catalyst, SCR system ready, island operation capability, Profibus DP interface, etc. - As per technical drawings, plans, P&ID diagrams, and data sheets - Genset with 5,056 operating hours (operating period 01/2021 – 12/2021) - Complete CHP unit in very good condition; regularly serviced under a premium service contract. Currently preserved and stored by the manufacturer.