Beli Buck Mesin Bor Lubang Dalam bekas (78.508)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, diameter pemasangan: 10 mm, kecepatan spindel (min.): 6.000 rpm, kecepatan spindel (maks.): 12.000 rpm, panjang meja: 1.130 mm, lebar meja: 250 mm, pl-hu-001 Pgodpfx Adjx Npimsisp

Kondisi: siap digunakan (bekas), Uciosarko - the U2PRW drilling machine is designed for processing strips and furniture fronts made of solid wood or MDF. The machine operates in semi-automatic cycle mode. In a single cycle, the machine performs: cutting at a specified angle (within a 45–90 degree range) and drilling on the mitered surface or the edge of the workpiece. – Manufactured in Poland TECHNICAL SPECIFICATIONS: Pgedpfxoq Ii Dlj Adisp - Max. height of cut material: 60 mm - Max. width of cut material at 45°: 70 mm - Max. width of cut material at 90°: 150 mm - Max. length of cut material: 2200 mm - Min. length of cut material at 45°: 455 mm - Main saw blade diameter: 250 or 300 mm - Scoring blade diameter: 100 mm - Max. lower milling cutter diameter: 35 mm - Max. depth of lower milling: 15 mm - Mounting diameter for face drills and lower milling cutter: 10 mm Drilling head (face drilling): - Spindles: 4 - Axial spacing of spindles: 32; 32; 40 mm - Spindle array: linear - Max. face drilling depth: 60 mm - Installed power: 7 kW - Operating pressure: 0.6 MPa - Dimensions (length/width/height): 4300 / 1600 / 1570 mm Processing Assemblies The device is equipped with two processing assemblies: the left assembly, which is fixed, and the right assembly – movable. Each assembly consists of the following main units: main saw unit, scoring saw, drilling unit for drilling on the mitered surface, and drilling unit for drilling underneath the workpiece. Lower hole drilling unit This unit is installed optionally. It is used for processing corner strips for adjustable-width door frames. It performs a blind drilling (not through-hole), typically for cup hinges. The attached picture shows a mounted red cover, which serves as a bed for the processed angle strips as well as a cover with chip extraction. Workpiece clamping The machine is also equipped with a dual-plane clamping system incorporating both horizontal and vertical clamps. The horizontal clamps are responsible for pressing the workpiece against the vertical reference points and straightening it, while the vertical clamps immobilize the piece during processing. Horizontal clamping is always activated before vertical clamping. Control system The machine's control system is user-friendly, intuitive, and functional. It allows individual activation or deactivation of all processing units, with separate controls for the left and right sides. All main units have independent drives. The right processing assembly is positioned by pressing the corresponding control buttons on the control panel. The actuation mechanism is a gear system with an electric motor driving a trapezoidal screw. The electronic US-control system with operator panel and digital readout is used to read and set the length of the workpiece. This system also automatically adjusts the length counter readout when changing between 45° and 90° cutting angles. Additionally, it is responsible for automatic referencing.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, Nomor seri: 134361 Tahun produksi: 2012 Kontrol Fanuc seri 160 I PB Pgjdpjyyk Urofx Adiop Ukuran maksimum lembaran: 3000 x 1500 mm Berat mesin: 15.100 kg

Kondisi: baik (bekas), Tahun pembuatan: 1983, 1 mesin pelurus lembaran bekas SCHLEICHER dengan gulungan pengurai Lebar lembaran maksimum: 320 mm Ketebalan lembaran minimum: 0,8 mm (pelanggan juga pernah memproses lembaran dengan ketebalan 0,4 mm) Ketebalan lembaran maksimum: 3 mm Jumlah rol pelurus bagian atas: 3 Jumlah rol pelurus bagian bawah: 3 Diameter rol pelurus: 70 mm Total kebutuhan daya: 1,4 kW Dimensi mesin P x L x T: sekitar 1300 x 1200 x 1800 mm Pgedpfxjzphauo Adisp Berat mesin: sekitar 1000 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Kondisi: bekas, Tahun pembuatan: 1993, Mesin bekas Tahun pembuatan: 1993 Perlengkapan dan data teknis: Chuck bor 2-rahang hingga Ø tangkai 20 mm Penyesuaian posisi pneumatik pada 2 level 0-100 mm Pedpjw I Uy Tjfx Adisgp Kedalaman bor maksimum 150 mm Rel raster presisi 12 mm Kunci tengah dan penyesuaian melintang 2 silinder penjepit pengaman pneumatik Motor 1,5 kW Kecepatan 2800 rpm Perangkat bor lubang panjang dapat diturunkan dengan 2 cam program Berat mesin sekitar 310 kg Ukuran mesin (P x L x T) 1100 x 1100 x 1500 mm (tanpa penyangga) Ketersediaan: segera Lokasi: Röllbach

Kondisi: perlu perbaikan (bekas), Drilling capacity in steel / diameter: [mm] Throat depth: 1000 mm Workpiece height, max: [mm] - Max. throat depth: 1000 mm - Quill stroke: 250 mm Milling spindle / head: - Spindle speed range from: 47.5 rpm - Spindle speed range up to: 2120 rpm - Spindle diameter: 60 mm - Space requirement (left/right): 2000 mm Pgjdovmtlhepfx Adiop - Space requirement (front/back): 750 mm - Overall height: 2160 mm - Total weight approx.: 2500 kg The machine is partially overhauled. - Vertical and cross adjustment have been renewed.

Kondisi: baik (bekas), Bacciottini Pit Stop AFSpeed Mesin Pelipat Otomatis Pgsdpfx Adszmu E Soiep Perangkat berfungsi penuh dan siap digunakan. Merupakan sistem pelipat dan perforasi paling efisien di pasar dengan desain yang kokoh. Dibuat di Italia. Pengumpanan vakum non-stop dengan kemampuan menambah material saat mesin beroperasi. Dua kompresor independen (hisap dan aliran udara). Paket sudah termasuk alat pelipat dan alat perforasi. Data teknis: Ukuran maksimal kertas: 500 x 700 mm Ukuran minimal kertas: 100 x 150 mm Kecepatan maksimal (untuk format A4): 8.000 lembar/jam Berat material: 80-600 GSM Jumlah lipatan maksimal per lembar: 100 Jarak antar lipatan: 0,1 mm Akurasi pengaturan: 0,1 mm Daya listrik: 400 V Konsumsi daya: 3,5 kW Berat: 200 kg Dimensi: 1600 x 800 x 1200 mm

Kondisi: baik (bekas), nagel-citoborma-290ab-paper-drill-de Pedpfx Adjzmu E Eeiegp

Kondisi: baik (bekas), Nagel Citoborma 480AB Mesin Bor Kertas Mesin ini dalam kondisi sangat baik. Memiliki empat kepala bor. Spesifikasi teknis: Jarak antar mata bor: 45-285 mm Diameter bor: 2-20 mm Tinggi tumpukan: 60 mm Berat: 275 kg Siklus pengeboran otomatis, dikendalikan dengan pedal kaki dan tombol manual. Konstruksi kokoh di atas pedestal. Meja bor dapat disetel di semua bidang. Ini adalah salah satu model Citoborma terbaru. Pgedpfxozmu Ers Adiep Termasuk alat kerja, instruksi, serta stik pemotong dan mata bor baru.

Kondisi: baik (bekas), Nagel Citoborma 490 Mesin Bor Kertas Ini adalah mesin bor Citoborma terbesar yang saat ini diproduksi. Kondisi sangat baik, siap untuk produksi. Mesin dilengkapi dengan 4 kepala bor. Limbah hasil pengeboran dibuang ke dalam keranjang di bagian belakang mesin. Mesin dioperasikan menggunakan pedal kaki atau tombol dua tangan. Setiap kepala memiliki pengaturan naik/turun terpisah, sehingga dapat menggunakan mata bor dengan panjang berbeda. Paket termasuk mata bor cadangan, alat, dan buku manual. Spesifikasi teknis: Jumlah kepala bor: 4 (masing-masing kepala mudah dilepas) Pjdezmu Efspfx Adijgp Tinggi tumpukan maksimum: 60 mm Ukuran mata bor: 2-10 mm Jarak antar bor dapat diatur: 45 – 425 mm Dua kecepatan pengeboran Daya listrik: 380V Berat: 365 kg Dibuat di Jerman.

Kondisi: baru, Tahun pembuatan: 2023, New machine Year of manufacture: 2023 Multi-spindle universal dowel boring machine with 3 numerically controlled axes (+/- 0.1 mm) with horizontal and vertical drilling capabilities electronic adjustment of height, depth, and drilling angle (0-90°) with 7" color touchscreen, memory for up to 1000 programs with parallel stops with numeric adjustment with 21 drilling spindles (10 left, 11 right) Spindle pitch: 32 mm Max. drilling distance: 640 mm Max. tool diameter: 40 mm Max. drilling depth: 65 mm Max. horizontal drilling height: 35 mm Working height: 860 mm Max. panel thickness: 60 mm Pgsdpfx Ajlk R Epsdisp Max. panel size: 900 x 3000 mm Motor: 1.5 kW – 2800 rpm Pneumatic connection: 6/8 bar Compressed air consumption per work cycle: 5 NL Extraction nozzle: 80 mm Machine footprint: 1580 x 950 x 1400 mm Net weight: 340 kg Availability: short notice Location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 1988, Mesin bor radial Produsen: Tai Pin Pgsdpfsznvibex Adiop Tipe: TPR 1230 Tahun pembuatan: 1988 Kapasitas pengeboran pada baja: Ø 42 mm Kapasitas pengeboran pada besi cor: Ø 55 mm Pembuatan ulir (baja/besi cor): M25 / M38 Jangkauan (dari kolom hingga tengah spindel): 330 – 1.230 mm Langkah pergerakan kepala spindel: 880 mm Diameter kolom: 300 mm Pemasangan alat: MK 4 (Tirus Morse 4) Langkah pin (langkah spindel): 270 mm Kecepatan spindel: 12 tingkat, 37 – 1.253 RPM (pada 50 Hz) Pengumpanan otomatis: 3 tingkat (0,05 / 0,09 / 0,15 mm/putaran) Jarak spindel – pelat dasar: 467 – 1.360 mm Penyesuaian ketinggian lengan: 620 mm 23726

Kondisi: bekas, Type BF 63 Spindle taper: 4MT Podpfxswrpy Rs Adijgp Spindle diameter: 63 mm Spindle speed: 8–1400 rpm Table size: 900 x 710 mm Drilling stroke: 560 mm Table load capacity: 2,000 kg Rotary table: 360 degrees

Kondisi: baik (bekas), Table size: 1100 x 1300 mm Pgsdpoh T T Aqsfx Adiop Travel range: 1300 x 1300 mm Spindle travel: 500 mm

Kondisi: baik (bekas), Manufacturer: MAS Type: VR 4 Pedpfxjh Eigbo Adiogp Outreach: 1000 mm without table!

Kondisi: baik (bekas), 12-head drilling machine for sale, Table size: 400 x 360 mm Pgjdpfjpy D Dwox Adiop

Kondisi: bekas, High-Performance Drilling Machine ALZMETALL Type Abomat 20 Production Drilling Machine Pgedpfoikrtqsx Adijp Serial No. 452 Year of manufacture: 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle taper: SK 40 - M16 Throat depth: 280 mm Drilling saddle stroke: 500 mm Distance spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, stepless Drilling saddle feed: 20 - 224 mm/min, stepless Drilling saddle rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.1 kW (speed 1000 rpm) Connection: 400 Volt, 50 Hz - Stepless spindle speed via frequency inverter - Stepless drilling saddle feed via frequency inverter - 2 operating modes: setup and automatic mode - Centralized lubrication system - Control cabinet mounted at rear of the machine - Swiveling operator panel - Mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment Required space (L x W x H): 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Kondisi: baik (bekas), Outreach: 915 mm Spindle taper: MK 3 Length: 1700 mm Width: 1,000 mm Psdpfx Adjd Ixy Ioiogp Height: 2000 mm Weight: 1000 kg

Kondisi: bekas, Tahun pembuatan: 2018, 1 piece CNC-controlled drilling, gluing, and dowel insertion machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro), 400V, 3-phase, 50Hz, complete in standard configuration with: - Support with linear guide comprising: * 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) * 1 pc. blow-out, gluing, and reinforced dowel insertion station for Ø 8 mm dowels, dowel length 30 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, working length 1300 mm, max. traversing speed 78 m/min - Z-axis, position programmable via support table 5-40 mm; with option for NC-controlled Z-axis - Programmable dowel projection 7-20 mm; with option for NC-controlled Y-axis * Drilling depth 0-35 mm (with drill length 70 mm) automatically set to dowel projection - Closed gluing system: 6 bar glue pressure via glue nozzle, for glues with viscosity 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for flushing glue system; each with 1 stainless steel container for 5 kg glue, and 5 l water - Control lamp for glue level indication in glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual processing of 1-4 workpieces - 4 pcs. pneumatic tilting vertical clamps 10° for workpiece thickness up to max. 80 mm; workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT control system with: * Built-in industrial PC, incl. Beckhoff TWINCAT Soft PLC * Operating temperature 0-50°C * 15" resistive TFT industrial touchscreen display, resolution 1024 x 768 * CPU 2 GHz, 256 MB RAM * 2x network adapters, IDE hard disk, 4x rear USB, 1x front USB * Operating system: WINDOWS 7 - Programming via user-friendly software menu, freely programmable drilling positions by ABSOLUTE, RELATIVE, or GRID coordinates, automatic workpiece mirroring and process optimization, 4 operator fields for different programs, graphical workpiece representation, parametric programming, zero-point shifting, programmable work lists, plain-text error diagnostics OPTIONS: Pgodpfxjxwaz Hs Adisp - 1 Electronic glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional 10° vertical tilting clamps with holder (total 8 clamps) - Surcharge for machine bed length 1800 mm (working length 1800 mm) - Surcharge for: * 1 horizontal drilling unit, 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm (standard working length remains unchanged) - Y-axis NC controlled, with ball screw drive and dynamic speed 300 mm/sec; software programmable for dowel projection 7-30 mm and drilling depth 0-42 mm (with drill length 77 mm) for vertical drilling unit (top drilling), Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis, position 5-62 mm instead of 5-42 mm - Surcharge for: * 1 vertical drilling unit (top drilling), 1.5 kW motor, multi-spindle drilling head with 3 individually selectable spindles, 32 mm pitch, X-axis arrangement, tool speed 3000 rpm; Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length remains unchanged) - 1 NC-controlled Z-axis, with K

Kondisi: bekas, Tahun pembuatan: 1997, gebrauchtmaschine-1997 Pgjdpfx Adozn Ah Rsiop

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, kedalaman pengeboran: 55 mm, kecepatan rotasi (min.): 2.800 rpm, daya: 3 kW (4,08 hp), tinggi meja: 875 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, frekuensi input: 50 Hz, Produktivitas tinggi untuk pengeboran sisi furnitur Sistem Pengeboran MAGGI 46 adalah mesin pengeboran ganda semi-otomatis, dilengkapi dengan dua kepala vertikal paralel, masing-masing memiliki 23 poros pengeboran. Ini adalah solusi ideal bagi produsen furnitur yang sering melakukan pengeboran pada sisi badan, rak buku, lemari, atau rak. Berkat dua kepala pengeboran, mesin ini menghasilkan dua baris lubang paralel dalam satu siklus kerja, sehingga secara signifikan mengurangi waktu produksi dibandingkan dengan mesin dengan satu kepala. Produsen MAGGI – Italia Jumlah spindel 46 buah Pgsdpfx Aszp H Nzsdiop Spindel kiri - kanan 11 kiri, 12 kanan Jarak antar spindel 32 mm Jarak antar spindel luar 145 – 625 mm Jarak unit depan-rel 15 – 494 mm Jarak unit belakang-rel 160 – 639 mm Kedalaman pengeboran vertikal maksimum 55 mm Diameter alat pengeboran maksimum (Ø) 40 mm Diameter tangkai mata bor (Ø) 10 mm Langkah piston hidrolik 70 mm Ketebalan panel maksimum 50 mm Ukuran benda kerja maksimum 3000 x 700 mm Tinggi meja dari lantai 875 mm Piston penjepit benda kerja 6 buah Jumlah motor 2 buah Daya motor 2 HP / 1,5 kW Kecepatan motor 2800 rpm Tekanan udara yang dibutuhkan 6-8 bar Konsumsi udara 20 l/siklus Diameter tudung knalpot (Ø) 80 mm Dimensi keseluruhan 1206 x 1180 x 1163 mm Berat bersih 366 kg Tegangan suplai 400 V – 3 Fase – 50 Hz

Kondisi: sangat baik (bekas), Tahun pembuatan: 2021, Mesin Pemotong/Pemangkas/Pembuat Garis Lipat DUPLO DC-618 Mesin Multifungsi All-in-One berperforma tinggi Fitur: Podpfxsznxbys Adisgp - PC All-in-One dengan dudukan - Kontrol lembaran ganda ultrasonik - Kontrol kode batang (CCD) - Pembaca tanda cetak (CCD) - Penghenti pemotongan - Wadah kartu - 250 slot memori (ditambah pengontrol PC) - Konektor EFI Fiery DFE - 6 pisau pemotong memanjang - 1 pisau pemotong melintang (hingga 30 potongan) - 1 bilah pembuat garis lipat (hingga 20 garis lipat) Karakteristik: Memproses hingga 23 lembar per menit Hingga 6 potongan memanjang dan 25 potongan melintang, serta 20 garis lipat Alat yang dapat diganti Pengaturan mudah dengan Jobcreator baru Kompensasi variasi gambar cetak dan penyusutan lembaran Pembacaan kode batang untuk pengoperasian yang sepenuhnya otomatis Memori pekerjaan 250 / tidak terbatas di PC Kertas hingga 400 g/m² Hingga 200 kartu nama per menit 30 potongan dan 20 garis lipat per lembar Spesifikasi Teknis: Format terbuka minimum: 210 x 210 mm Format terbuka maksimum: 330,5 x 750 mm Format akhir minimum: 50 x 48 mm Format akhir maksimum: 330,5 x 750 mm Kapasitas tumpukan: 100 mm Berat kertas: 110 - 400 g/m² Kecepatan: 23 lembar/menit Catu daya: 230 V, 50/60 Hz, 1,1 A, 250 W Dimensi (P x L x T) 2.095 x 810 x 1.730 (termasuk PC) mm Berat: 166 kg

Kondisi: bekas, Universal tool milling machine DECKEL Type FP 1 Universal milling machine Machine no. 2101 - Year of manufacture: 1979 Manual travels X: 300 mm Y: 160 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm, 16 steps Feed X and Y axes: 5 to 500 mm/min Rapid traverse: 1200 mm/min Motor power: 1.5 and 1.9 kW, pole-changeable Power connection: 380 Volt, 50 Hz - Infinitely variable feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gearbox steps - Quill travel on vertical milling head: 60 mm - Vertical milling head swivels and can extend horizontally by 100 mm - Fixed angle table 600 x 210 mm - Coolant device integrated in machine base - Freestanding control cabinet - Original chip tray for mounting on machine base - Electrical circuit diagram available Pgedper U St Uefx Adijp Required space (L x W x H): 1350 x 1100 x 1700 mm Weight: 770 kg Good condition

Kondisi: bekas, 4-axis CNC drilling and milling machine IXION type 30 CNC W VMC, machining center Year of manufacture: approx. 1997, machine overhauled in 2020 Travel distances X: 600 mm Y: 350 mm Z: 600 mm Table size: 800 x 400 mm T-slot spacing: 75 mm Table load capacity: 300 kg Spindle taper: SK 40 (retention knob DIN 69872 A) Spindle speed: 20-5000 rpm Spindle torque: max. 150 Nm Distance spindle nose to table: max. 660 mm Feed rate X, Y and Z: 0 - 5000 mm/min, stepless Rapid traverse X, Y and Z: 15000 mm/min Tool change time: approx. 5 sec Chip-to-chip time: approx. 7.5 sec Milling capacity in St 60: 150 ccm/min Pgsdpfxeu Tln No Adiop Drilling capacity in St 60: 35 mm Tapping capacity in St 60: M24 Spindle drive power: 5 kW (10 kW at 25% duty cycle) Power supply: 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position automatic tool changer - Hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, 3-jaw chuck Ø 200 mm Speed approx. 25 rpm, gear ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Control cabinet fixed to the machine Transport dimensions: Length 320 cm x Width 230 cm x Height 300 cm Machine footprint with chip conveyor (L x W x H): 3200 x 3100 x 3000 mm Machine weight: 3,100 kg Chip conveyor weight: approx. 200 kg Good condition.

Kondisi: bekas, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 28317 Year of manufacture: approx. 1960 Travel distances X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Horizontal spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor output 0.8 and 1.1 kW, pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gearbox stages - Feed in X- and Z-axis - Coolant system with mechanical pump integrated in the machine base - Quill travel on vertical milling head 60 mm Pedpfx Adjiy Ekveijgp - Vertical milling head swivels +/- 90° - Metal base made of angle iron with machine feet Space requirement L x W x H 1100 x 900 x 1650 mm Weight 650 kg in good condition