Beli Double Cold Pressing 1.400Kg/H bekas (69.825)

Kondisi: bekas, Double-column hydraulic press SMG Type HBP 200 - 2000 / 2000 Serial No. 7.4117 Year of manufacture: 1986 - Refurbished in 2000 Pressing force: 200 tons Distance between uprights (front): 2050 mm Clearance between uprights (lateral): 2030 mm Djdpfxjdzp Tco Aaqjkl Table size: 2800 x 2000 mm Ram area: 2000 x 2000 mm Ram stroke: 700 mm Maximum installation height: 1850 mm Table height above floor: 750 mm Ram return force: 33 tons Rapid advance speed: 500 mm/s Pressing speed: 72/36 mm/s Return speed: 420 mm/s Safety distance: 230 mm Main motor power: 75 kW Control pump motor power: 11 kW Power supply: 380 Volt, 50 Hz - 8-way flat guide for ram - Clamping plate with 22 mm T-slots on ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in top dead center - Travel measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS PLC S7 - Free-standing control cabinet - Two-hand control console, free-standing - Ground-level installation - Central lubrication system - Operating manual with circuit diagrams Space requirement (upright): L x W x H 3700 x 2900 x 5900 mm Total machine height with motor: 5900 mm Space requirement for horizontal transport: L x W x H 5900 x 3250 x 2950 mm Weight: 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000 onwards, the machine was used as a try-out press in a toolmaking facility. Good condition

Kondisi: bekas, Tahun pembuatan: 1992, translate_de_hu_001 Dkjdpfx Aasvuui Rjqsl

Kondisi: bekas, Tahun pembuatan: 2012, 0 Dksdpfxovuuk Ie Aaqjl

Kondisi: bekas, Tahun pembuatan: 1993, Pressure: 63 t Stroke: 10 - 80 mm Strokes per minute: 75 - 400 Upright spacing: 1080 / 920 mm Shut height (stroke + ram adjustment at top): 450 mm Lateral upright passage: 300 mm Table area: 1000 x 550 mm Die opening in table: 700 x 160 mm Table height above floor: 1080 mm Ram area: 900 x 450 mm Ram adjustment: 80 mm Material width: 250 mm Material thickness: 0.3 - 3.0 mm Material cross-section: 750 mm² Feed length: 1.0 – 9999.9 mm Drive power: 11.0 kW Weight: 9.5 t Required space approx. 2.8 x 2.7 x 3.1 m (L x W x H) Approved for automatic operation according to German accident prevention regulations (UVV) Dkedpfxovut Ixo Aaqel with infinitely variable drive control (PIV), pneumatic clutch/brake combination (manufacturer: Ortlinghaus), manual stroke adjustment, motorized ram adjustment, motorized oil circulation lubrication, pneumatic ram weight compensation Servo roll feed Kaiser KWV 250.

Kondisi: bekas, Tahun pembuatan: 1993, translation_01 Dsdpfx Aeyutwkjaqokl

Kondisi: baru, Tahun pembuatan: 2025, Press force: 1000 t Distance between uprights: 4250 mm Stroke: 400 mm Control: SIEMENS S7-1500F Table dimensions - longitudinal: 4000 mm Table dimensions - transverse: 1600 mm Total power requirement: 200 kW Machine weight: approx. 250 t Space requirement: approx. 7.5 x 4.8 x 7.4 m This new FAGOR TSE2-1000-4000-1600 transfer press is available immediately!! DESCRIPTION: New transfer press!! In storage and has never been set up. COMPLETE with electronic bar transfer 0 - 800 mm transfer stroke and 500-1300 mm distance between transfer bars. Lifting stroke = 0-150 mm. 2 x extendable T-slotted tables. Max. tool total weight: 20,000 kg, upper part: max. 10,000 kg. Ram counterbalance via pneumatic cylinder. Automatic pressure setting with target value preset from tool memory. Lubrication: Main bearings and gears continuously supplied by circulating lubrication. LED lighting for tool area. 2 auxiliary control panels, scrap chute panels, press force measuring device, vibration elements, brand KTI. Technical data: Frame design: Transfer press drive type: mechanical Windows in side frame: yes Through hole in table: yes Sliding table: yes Number of tables: 2 Press forces Total nominal force: 1000 t Press table Clamping area (left-right): 4000 mm Clamping area (front-back): 1600 mm Height above floor: 600 mm automatic tool clamping: yes Dedpfsym D E Ajx Aaqjkl Ram Stroke: 400 mm Ram (mechanical press) Ram adjustment: 300 mm Strokes per minute: min. 8 /min Strokes per minute: max. 50 /min Hydraulic overload protection: yes Tool installation dimensions Tool installation height (stroke bottom, adjustment) 766 mm Distance between uprights (left-right): 4250 mm Clear lateral passage (width): 1800 mm Max. tool weight: 20,000 kg Transfer system Gripper rail inside width closed: max. 500 mm Gripper rail inside width open: max. 1300 mm Electrical connection data Total power consumption: 200 kW Connected load: 350 kVA Supply voltage: 400 V Network frequency: 60 Hz Dimensions / weights Required space length: 7500 mm Required space width: 4800 mm Height above floor: 7360 mm Height below floor: 4000 mm Total weight: approx. 250,000 kg Additional press equipment Light barrier: yes Cutting shock damping: yes automatic tool clamping: yes Hydraulic overload protection: yes Transfer device: yes

Tahun pembuatan: 2005, Kondisi: hampir baru (bekas), Gebrauchte Kojima 2200t hydraulische H-Rahmen-Presse zu verkaufen Maschinentyp: Hydraulische Presse Hersteller: Kojima Presskraft: 2.200 Tonnen Hub: 1.200 mm Lichter Abstand: 1.800 mm Stößel: 3.200 x 1.800 mm fahrbarer Untertisch: 3.200 x 1.900 mm Hub fahrbarer Untertisch: 2.500 mm Geschwindigkeit fahrbarer Untertisch: 100 mm/sec Matrizenpolster: 100 – 500 Tonnen Polsterhub: 450 mm Dkjdpslqxg Hefx Aaqsl Polsterplatte: 2.000 x 1.275 mm Polsterbolzen: 50 mm Durchmesser Stößelabsenkgeschwindigkeit: 235 mm/sec Hydrauliktank: 3.200 Liter

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, gaya penekanan: 400 t, Hidrobrasil double-column press – 400 t – 1,500 × 1,500 mm – Sliding table press with ejector For sale is a hydraulic double-column press with sliding table from Hidrobrasil, offering a pressing force of 400 t. This machine is designed for demanding forming and pressing operations and, thanks to its movable table and integrated ejector, provides high flexibility in tool handling. With modern controls, high precision, and comprehensive safety equipment, it is ideally suited for industrial series production and complex applications. ==== Technical Data + Information: Hydraulic double-column press – sliding table press – 400 t ==== General Information Dodpfx Aasph Uk Njqskl - Manufacturer: Hidrobrasil - Model: Double-column press - Machine type: Sliding table press - Construction: Double-column design - Pressing force: 400 t (4,000 kN) - Machine weight: approx. 28 t - Dimensions (L × W): approx. 3,800 × 4,475 mm - Height: approx. 4,300 mm - Number of operator sides: 1 ==== Working Area - Max. opening width: 800 mm - Stroke: 800 mm - Table height above floor: 1,100 mm - Minimum hall height: 5,500 mm - Parallelism deviation: ± 0.1 mm ==== Table & Ram - Table size: 1,500 × 1,500 mm - Ram size: approx. 1,600 × 1,500 mm - Table plate precision-milled with T-slots (DIN 650-22) - Ejector in table: 20 t / 350 mm stroke - Ejector moves outward with the table ==== Speeds - Closing speed: up to 100 mm/sec - Opening speed: up to 100 mm/sec - Pressing speed: 3–10 mm/sec ==== Hydraulics & Performance - Operating pressure: max. 300 bar - Main pump: Bosch Rexroth axial piston pump (approx. 145 l/min) - Auxiliary pump: Bosch Rexroth gear pump (10 l/min) - Pressure holding: up to 300 sec - Main motor: 40 kW - Oil volume: approx. 1,000 l - Oil temperature monitoring: warning at 55 °C, shutdown at 60 °C ==== Controls & Operation - Control: Siemens S7-1200 - Touchscreen: 9" monitor - Remote maintenance: SECOMEA Ethernet - Operating modes: setup, single stroke, automatic/cycle - Pressure adjustment: 60–400 t via touchscreen - Stroke limit via pressure or position - Free positioning of ram - Swiveling control panel - Two-hand operation with function selector ==== Safety & Equipment - Light curtains: SICK / PILZ (14 mm, up to 1,800 mm height) - Hydraulic and mechanical ram locking - Automatic lubrication - Recirculating oil cooling - Side doors with viewing windows (1,000 × 800 mm) ==== Construction & Features - Precise deflection: ≤ 0.2 mm/m - Robust construction for continuous operation - Suitable for demanding forming and series production processes ===== Forming, series production, toolmaking, pressing operations, sheet metal processing Hydraulic press, double-column press, sliding table press, industrial press, forming press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our great strength lies in special machine construction and press automation. We supply tailor-made hydraulic presses at surprisingly affordable prices. The hydraulics are equipped predominantly with components from leading European manufacturers.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2020, gaya penekanan: 20 t, Hidrobrasil Double-Column Hydraulic Press – 20 t – 1,400 × 1,100 mm – Stroke 300 mm For sale is a hydraulic double-column press from the manufacturer Hidrobrasil with a pressing force of 20 t. This machine is designed for production and assembly applications in small batch series, featuring easy operation, rugged construction, and precisely adjustable pressing parameters. Thanks to its compact design and reliable hydraulics, it is ideal for a wide range of industrial applications. Dedpehmbhqjfx Aaqokl ==== Technical Data & Information: Hydraulic Double-Column Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Double-Column Press - Type: Hydraulic Double-Column Press - Machine Description: Production Press - Pressing Force: 20 t (200 kN) - Machine Weight: approx. 3 t - Overall Height: approx. 2,800 mm - Number of Operator Sides: 1 ==== Working Area - Max. Opening Width: 500 mm - Stroke: 300 mm - Table Height above Floor: approx. 900 mm - Table Cut Out: 1,100 × 850 mm ==== Table & Ram - Table Size between Columns: 1,400 × 1,100 mm - Ram Size between Columns: 1,400 × 1,100 mm ==== Speeds - Closing Speed: up to 10 mm/s - Opening Speed: up to 30 mm/s - Pressing Speed: approx. 9 mm/s ==== Hydraulics & Drive - Operating Pressure: max. 280 bar - Main Pump: Bosch Rexroth / Parker, approx. 35 l/min - Oil Tank Capacity: approx. 150 l - Recirculation Pump for Cooling: approx. 6.5 l/min - Motor Power: 3 kW - Total Connected Load: approx. 5 kW ==== Control & Operation - Pressure Adjustment: 4–20 t via rotary knob - Stroke setting via slide regulator - Manual lubrication via grease nipples ==== Features - UKF Pump-Over Cooling Filtration (electric cooling) - Two-cylinder system - Sturdy design for continuous production use ===== Assembly operations, loading applications, small batch production, forming technology, production processes Hydraulic press, double-column press, production press, insert press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to the German Machinery Directive as well as European Machinery Directive (Directive 2006/42/EC), the EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they also fully comply with the national Brazilian safety standard NR 12, which builds upon these regulations. Our particular strength lies in special machine construction and press automation. We offer tailor-made hydraulic presses at surprisingly affordable prices. For the hydraulics, we primarily use components from leading European manufacturers.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2017, nomor mesin/kendaraan: DF0052, gaya penekanan: 200 t, HIDRALMAC Double-Column Press – 200 t – 1,200 × 1,000 mm – Deep Drawing Press For sale is a hydraulic double-column press (deep drawing press) manufactured by HIDRALMAC, offering a pressing force of 200 t. This machine is designed for demanding deep drawing and forming operations, providing optimal conditions for industrial series production through its modern control technology, high operating speeds, and precise pressure regulation. ==== Technical Data & Information: Hydraulic Double-Column Press – Deep Drawing Press – 200 t Dsdpfefxyirex Aaqskl ==== General Information - Manufacturer: HIDRALMAC - Model: Double-Column Press - Machine designation: Deep Drawing Press - Design: Double-Column Press - Pressing force: 200 t - Machine weight: approx. 20.5 t - Space requirement (L × W × H): approx. 4,000 × 2,600 × 5,000 mm - Main cylinder: 1 unit ==== Working Area - Distance between uprights: 1,200 × 1,000 mm - Installation height: 800 mm - Working height: 1,100 mm - Stroke: 600 mm ==== Table & Ram - Table plate: 1,200 × 1,000 mm - Ram plate: 1,200 × 1,000 mm - T-slots: according to DIN 650-22 (custom configurations possible) - Return force: 20 t ==== Speeds - Approach speed: 170 mm/sec - Return speed: 150 mm/sec - Working speed: 15 mm/sec - Setup mode: 2–10 mm/sec ==== Hydraulics & Power - Total power requirement: 32.5 kW - Axial piston pump: Bosch Rexroth - Hydraulic manifold: Rexroth - Oil requirement: approx. 500 l - Oil cooling: electric - Pressure control: via PLC (from 20 t) - Pressure holding: 0–10 sec ==== Control & Operation - Control: PLC system - Voltage: 400 V / 50 Hz - Control voltage: 24 V - Pressure adjustment: 20–200 t via monitor - Memory capacity: up to 200 programs - Operation: movable two-hand control unit - Socket in control cabinet: 220 V ==== Applications & Features - Precise control for deep drawing processes - High repeat accuracy - Suitable for series production and toolmaking ===== Deep drawing, forming, series production, sheet metal processing, toolmaking Hydraulic press, double-column press, deep drawing press, forming press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machinery guidelines as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards, as they fully comply with Brazil’s national safety directive NR 12, which is based on these standards. Our main strength is special machine engineering and press automation. We supply customized hydraulic presses at surprisingly attractive prices. Only components from leading European manufacturers are used in the hydraulic systems of our presses.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, gaya penekanan: 400 t, Four-Column Hydraulic Press HTHP-400 – 400 t – 1,200 × 1,200 mm – Stroke 900 mm For sale: hydraulic four-column press, model HTHP-400, with a pressing force of 400 t. This machine is specifically designed for deep drawing applications and is equipped with a high-performance deep drawing cushion. Thanks to its robust construction and high total output, it is ideally suited for industrial series production and demanding forming operations. ==== Technical Data & Information: Hydraulic Four-Column Press – HTHP-400 ==== General Specifications - Model: HTHP-400 - Design: Four-column press - Machine Type: Deep drawing press - Year of manufacture: 2019 - Pressing force: 400 t - Total power requirement: 65 kW ==== Working Area - Installation height: 1,100 mm - Stroke: 900 mm - Max. operating pressure: 250 bar ==== Platen & Ram - Platen size: 1,200 × 1,200 mm ==== Drawing Cushion - Drawing cushion force: 150 t - Drawing cushion stroke: 280 mm Dkedpfjfh Izmox Aaqsl ===== Deep drawing, sheet metal forming, forming technology, serial production, tool making Hydraulic press, four-column press, deep drawing press, forming press, industrial press Looking for a hydraulic press tailored to your application? Contact us for an individual offer. Our hydraulic presses are built in accordance with German machinery directives as well as European Machinery Directive 2006/42/EC, EC standards, and EU safety regulations. Additionally, our presses exceed Canadian and European safety requirements as they comply fully with the Brazilian national safety standard NR 12, which is based on those regulations. Our core strengths are special-purpose machine construction and press automation. We offer custom-built hydraulic presses at surprisingly competitive prices. Only components from leading European manufacturers are used in the hydraulic systems of our presses.

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0303, gaya penekanan: 160 t, panjang meja: 550 mm, lebar meja: 500 mm, tinggi kerja: 550 mm, Hydraulic Vulcanizing Press – Hidrobrasil – 160 t Heating Press For sale is a hydraulic vulcanizing press from Hidrobrasil with a maximum pressing force of 160 t. The machine features electrically heated platens measuring 550 × 500 mm, a maximum working height of 550 mm, and a modern control system with recipe management. It is ideally suited for vulcanization, laminating, and thermal pressing processes in rubber and plastics processing. ==== Dkjdpfsfxygpsx Aaqol Technical Data & Information: Hydraulic Vulcanizing Press Hidrobrasil – Heating Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Heating Press / Vulcanizing Press - Press force: 160 t - Machine weight: approx. 4.3 t - Dimensions (L × W × H): 1,150 × 2,600 × 2,400 mm ==== Working Area - Distance between columns: 700 mm - Max. working height: 550 mm - Stroke / travel: 400 mm - Table height above floor: 900 mm ==== Table and Ram - Table plate: 700 × 600 mm - Ram plate: 700 × 600 mm - Heating plates: 550 × 500 mm (with 2 temperature sensors) ==== Forces - Return force: 16 t ==== Speeds - Advance speed: 50 mm/s - Pressing speed: 10 mm/s - Rapid traverse speed: 50 mm/s - Return speed: 50 mm/s ==== Hydraulics - Motor power: 15 kW - Oil tank: 300 l - Electric oil cooling: 1.5 kW ==== Heating System - Electrically heated plates up to 200 °C - Heating power: approx. 12 kW - Temperature range: 100 – 200 °C (in 5 °C steps) - Temperature accuracy: ± 3 °C - 2 temperature sensors per heating plate - Upper and lower plates individually controllable - Adjustable heating time - Automatic opening after heating cycle ==== Ejector System - Ejector size: 30 × 30 mm - Ejector stroke: 150 mm - Ejector force: 15 t - Ejector speed: 25 mm/s - Number of ejectors: 1 ==== Control System - Siemens S7-1200 - Monitor: 12" touchscreen - Freely programmable positions: - Upper hold position / speed change - Pressure build-up A / pressure release - Pressure build-up B / pressure release - Lower hold position - Pressure and venting times freely adjustable - Dwell pressure time up to 20 minutes - Recipe management: up to 25 programs storable - Extension via USB possible ==== Features - Two-hand control, swiveling design - Interior workspace lighting - Pressure adjustment via rotary selector (10 levels) - Heating plates with T-slots to DIN 650 (customizable) - Heating plate insulation from machine frame ==== Options - Rear safety double door (monitored): €2,400 - Right-hand side safety door (monitored): €1,200 - Left-hand side safety door (monitored): €1,200 ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression moulding, thermal press processes, hot pressing Vulcanizing press, heating press, hydraulic press, rubber press, laminating press, compression press, thermal press, tryout press, tool try-out press Looking for a hydraulic press tailored to your specific application? Contact us for a custom offer. Our core competence lies in special purpose machine construction and press automation.

Kondisi: baru, gaya penekanan: 400 t, HIDRALMAC Portal Straightening Press – 400 t – Upright Distance 3,400 mm – Movable Bridge For sale is a hydraulic portal straightening press from HIDRALMAC with a pressing force of 400 t. The machine is designed for heavy straightening and forming operations, featuring a generously dimensioned, movable bridge and a laterally movable cylinder. Thanks to its robust construction and high flexibility, it is ideally suited for large-format workpieces and demanding industrial applications. ==== Technical Data & Information: Hydraulic Portal Straightening Press – 400 t ==== General Information - Manufacturer: HIDRALMAC - Model: Portal Straightening Press - Machine type: Straightening press - Design: Portal press - Press force: 400 t - Machine weight: approx. 49 t - Dimensions (L × W × H): 7,900 × 5,500 × 4,300 mm ==== Working Area - Distance between uprights: 3,400 mm - Max. distance table – ram: 1,000 mm - Table height above floor: approx. 700 mm - Stroke: 500 mm ==== Movement & Flexibility - Bridge travel: 5,000 mm - Lateral cylinder travel: 2,800 mm - Bridge travel speed: 0–33 mm/sec - Cylinder lowering speed: 0–10 mm/sec - Cylinder return speed: 0–25 mm/sec Dkedpfxofhcc Rj Aaqel ==== Hydraulics & Performance - Total power requirement: 55 kW - Pump capacity: max. 131 l/min - Return force: 26 t - Oil tank: 700 l ==== Construction & Features - Reinforced table at the front section (reinforced over 1,500 mm, extra weight approx. 4,000 kg) - Protective covers for bridge drive motors - Signal lamps right and left with protective covers - Galvanized grating inside the catch pan ==== Application & Properties - Robust construction for heavy straightening work - High flexibility due to movable bridge and cylinder - Suitable for large and heavy workpieces ===== Straightening work, heavy forming, large components, steel construction, mechanical engineering Hydraulic press, hydraulic straightening press, portal press, straightening press, industrial press, forming press Are you looking for a hydraulic press tailored to your requirements? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these regulations. Our core strength is in special-purpose machine construction and press automation. We offer bespoke hydraulic presses at surprisingly competitive prices. The hydraulics of our presses typically use components from leading European manufacturers.

Kondisi: baru, Tahun pembuatan: 2019, gaya penekanan: 275 t, Portal Gantry Straightening Press – Manufacturer: Hidralmac – 275 t Gantry Press – Table Size 6,000 × 3,000 mm For sale is a powerful portal straightening press from Hidralmac, offering a pressing force of 275 t. This machine features a large table measuring 6,000 × 3,000 mm, a traversing bridge, as well as a laterally adjustable cylinder, making it ideally suited for large-format straightening, assembly, and heavy-duty operations. ==== Technical Data & Information: Portal Straightening Press Hidralmac – 275 t Gantry Press ==== General Specifications - Manufacturer: Hidralmac - Model: Portal Straightening Press - Design: Gantry Press - Pressing force: 275 t - Machine weight: approx. 40 t ==== Work Area - Frame gap: 3,000 mm - Table dimensions: 6,000 × 3,000 mm - Table height: approx. 700 mm - Max. table-to-ram distance: 1,100 mm - Stroke: 900 mm Djdpofxyigefx Aaqekl ==== Movements & Travel Paths - Bridge travel (X/Y): 6,000 mm - Bridge travel speed: 30 – 33 mm/s - Lateral cylinder adjustment: max. 3,000 mm - Cylinder movement via servomotor and rack-and-pinion ==== Speeds - Lowering speed: 2 – 10 mm/s - Stroke speed: 2 – 50 mm/s ==== Hydraulics - Total power requirement: 30 kW - Pump system: Axial pump with proportional valve - Oil tank capacity: 450 l - Return force: 27 t ==== Cylinder - Cylinder diameter: Ø 440 mm - Ram extension: 200 mm / Ø ==== Controls & Operation - Control system: Siemens S7-1200 - Monitor: Siemens 9" Touch Panel - Control desk: portable ===== Straightening, large component machining, heavy-duty assembly, steel construction, mechanical engineering, maintenance, special applications. Gantry press, straightening press, hydraulic press, industrial press, heavy-duty press, die spotting press, tryout press, tool try-out press. Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German machinery guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Additionally, our presses exceed both Canadian and European safety standards, as they fully comply with the national Brazilian safety guideline NR 12, which builds upon these standards. Leading European components are used primarily for the hydraulic systems of our presses.

Kondisi: bekas, Tahun pembuatan: 1969, de-to-hu Dkodjyt R Epopfx Aaqol

Kondisi: bekas, 1 Dsdov Srfwopfx Aaqskl

Kondisi: bekas, Tahun pembuatan: 1989, Druckkraft 20 t Gesamtleistungsaufnahme 20 kW Maschinengewicht ca. 5 t Dsdpfevr Hkzex Aaqokl Die Unterlagen zu dieser Maschine sind nicht vollständig vorhanden; Elektropläne liegen bei. Die Anlage war bis zuletzt in Betrieb. Wir verkaufen die Maschine als Ersatzteilträger, unter Ausschluss jeglicher Gewährleistung und Rücknahme, frei verladen LKW mit Kran in Soingen.

Tahun pembuatan: 1981, Kondisi: siap digunakan (bekas), presskraft-650kn-hub-150mm-druckkolbendurchmesser-190mm-saeulena bstand-950x460mm-einbauhoehe-500mm-tischdimensionen-900x870mm-max -hub-150mm-betriebsdruck-200bar-maschinendimensionen-1500x1750x24 00mm-gewicht-3000kg-dokumentation-und-besichtigung Djdpfeyq R D Hsx Aaqokl

Kondisi: bekas, Technical Details: Press force: 20 t Ram stroke: 6 – 60 mm Throat depth: 176 mm Ram adjustment: 55 mm Strokes per minute: 155 spm Distance table/ram: 270 mm Clear opening width: 470 mm Table size: 300 x 450 mm Through hole in table: 90 mm Ram clamping area: 130 x 248 mm Tilting angle: 28° Ram bore: 25 x 65 mm Table height above floor: 775 mm Required air pressure: 5.5 – 6 bar Total power requirement: 3.5 kW Dkodpfx Aaju Nflioqjl Machine weight approx.: 1.0 t Machine dimensions approx. LxWxH: 1.3 x 1.1 x 1.95 m High-performance press Central lubrication with light barrier (monitored) Linuflex Stroke counter Additionally, a steel plate 315 x 400 x 50 mm with center hole Ø 63 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 100 h, panjang langkah: 800 mm, kecepatan operasi: 9 mm/dtk, produsen pengendali: CADMAN TOUCH, lebar kerja: 12.000 mm, gaya tekuk (maks.): 1.600 t, penahan belakang: 1.000 mm, jarak antara penyangga: 10.600 mm, jenis kontrol: Kontrol CNC, jumlah sumbu: 15, Only 100 operating hours (table / guides / tools still as new) Installed, but never used in production – only for testing purposes CNC T1 + T2 + T3 Front bending support arm 3 × HH 2600 backgauge modules, 3 × Z1 + R1 + Delta 1 Dsdpfx Aaeygkuwoqokl Lower tool set variable VLA 50–150 mm Upper tool set LVD 505 V-axis adjustment 59.3 to 249.3 mm Thermotec oil cooler GC25T-35, max. 2200 kPa CADMAN TOUCH with premium press brake software Hydraulic upper tool quick clamping system Table width 500 mm Frame gap (throat): 1000 mm Max. bending length: 12000 mm Distance between frames: 10600 mm Max. pressing force: 1600T Table opening: 1070 mm Max. stroke: 800 mm Table width: 500 mm Frame gap: 1000 mm Approach speed: 80 mm/min Working speed: 9 mm/min Return speed: 90 mm/min X-axis travel: 600 mm Number of CNC axes: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3) Control: CADMAN TOUCH Crowning: Yes Hydraulic tool clamping: Yes Power: 125 kW Length: 14875 mm Width: 5430 mm Height: 7906 mm Weight: 277,500 kg Why do you need a 1600 ton press brake? The required bending force depends on: - Material thickness - Material strength - Bending length - Die opening If any of these factors are large, the required tonnage increases dramatically. A 1600 ton press brake is used when: - Thick sheets need to be bent: 20–60+ mm - High-strength materials are processed - Very long parts are bent: 6–10+ meters - Tight radii or deep bends are required Shaping of heavy welded constructions such as: - Bridge beams - Box columns - Large girders and stiffeners - Base frames for industrial machinery Shipbuilding, defense, and marine: - Hull sections - Deck plates - Bulkheads - Reinforcing ribs Energy and infrastructure: - Wind tower sections - Power plant components - Pressure vessel preforming - Transformer tanks A 1600 ton press brake is not intended for sheet metal workshops but is built for heavy industry, shipyards, steel construction companies, and energy projects. Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend verifying all critical details.

Kondisi: baru, Max. stroke: 400 mm\nTable height: Floor to top of table 850 mm\nInstallation height: 600 mm\nSpeeds: Advance 120 mm/s, Press 13–4 mm/s, Return 170 mm/s\nPump capacity: 65 l/min (REXROTH – axial piston pump)\nMotor: 15 kW – 1500 rpm\nDimensions (LxWxH): 2,100 x 2,400 x 4,300 mm\nWeight approx.: 11,000 kg\nCapacity: 1,500 kN (150 tons at 245 BAR)\n\nOperating mode: Selection via key switch\n\n- Manual / setup mode via two-hand operation without light barrier on front (backside always active)\n- Automatic mode with two-hand operation at full speed (with active light curtain)\n\nMain cylinder: Ø 270 mm\nAuxiliary cylinders: 2 x Ø 70 x 50 mm\n\nMotor: 15 kW – 1500 rpm (IE-3)\nPump: 45 cc – 65 l/min REXROTH axial piston pump\nSpeed: Advance 120 mm/s – Press: 13–4 mm/s – Return: 170 mm/s\n\nClear width: 1,300 mm\nTable plate: 1,200 x 800 x 90 mm with T-slots\nRam plate: 1,200 x 800 x 600 mm with T-slots & ribbed reinforcement\n\nInstallation height: 600 mm (max. distance between table & ram plate)\nStroke: max. 400 mm\nTable height: 850 mm (floor to top of table)\n-----\n\nHydraulics: (hydraulic accessories on top of the press)\n\nControl block & valves (REXROTH proportional valves)\nPre-fill valve (NG.125)\n8-way guide\nHydraulic ram safety device\nMechanical ram safety for TDC\nPressure adjustment via PLC\nSpeed adjustment via PLC\nPressure-hold valve for 600 sec\nAir cooler\nAutomatic lubrication for guides\nAuxiliary motor\nAuxiliary pump\n\nControl: \n\nMain switch cabinet (mounted on the side of the press frame)\nSwiveling control panel\nSIEMENS S7 - 1200\nKTP 9” SIEMENS touchscreen (languages: DE, ENG)\nSafety PLC (SICK)\nLight curtain for front & rear work area (SICK 750 + 150 mm)\nSoft starter\nMobile two-hand control unit\nSECOMEA Ethernet connection\nLinear scale for stroke length adjustment (450 mm – NOVOTECHNIK 16BIT)\n\nWork area lighting (2x, IP66)\n\n- 8 free I/O channels on the PLC for external connections\n-----\n- Safety railing around hydraulics\n- Side climbing ladder\n-----\nDocumentation: Operating manual in German (1x paper & 1x USB)\nHydraulic & electrical diagrams\nParts lists\nCE certificate\n\nStandard: EN 16092/1/3\n-----\n\nOverall dimensions: approx. 2,400 x 2,100 x 4,100 mm\nTotal weight: approx. 11,000 kg\n\nPaintwork: Frame RAL 7035 light grey Dkjdpfxempfwde Aaqjl

Kondisi: bekas, Tahun pembuatan: 1990, 20003 Dedpfx Aevut T Ioaqokl

Kondisi: bekas, Tahun pembuatan: 2003, Presskraft 50 t Hub 800 mm Ständerweite 2250 mm Abstand Tisch/Stößel, großer Hub oben, Verstellung oben 1600 mm Tischfläche 2250 x 1200 mm Dsdpevuun Hofx Aaqokl Stößelfläche 2250 x 1200 mm Eilgang abwärts 350 mm/s Eilgang aufwärts 190 mm/s Arbeitsgeschwindigkeit 27,5 mm/s Ölkapazität 800 l Antriebsleistung 24,2 kW Gewicht 13,0 t Platzbedarf ca. 3,75 x 2,75 x 4,67 m (L x B x H) Für Handbeschickung gemäß CE-Norm zugelassen Mit ölhydraulischem Antrieb, druck-, zeit- und wegabhängig steuerbar, Lichtschranke (Sick) vorn und hinten, hydraulische Stößelverriegelung (Sitema), Lichtschranke mit Aktivstart

Kondisi: bekas, Tahun pembuatan: 1991, Press force 500 t Upright width 1910 mm Stroke 500 mm Distance table/ram, max. stroke upper position, adj. upper position 700 mm Table area without shear impact damper 1910 x 1360 mm Table area with shear impact damper 1600 x 1360 mm Table height above floor 800 mm Ram area 1600 x 1270 mm Side frame opening 600 mm Downward speed 400 mm/s Upward speed 330 mm/s Working speed 10 - 28 mm/s Oil capacity 1200 l Drive power 60.0 kW Weight 40.0 t Space requirement (LxWxH) 3.6 x 2.5 x 5.0 m Dkjdpfx Aovuuiqjaqel Total height above floor 4.5 m Approved for manual loading operations according to German accident prevention regulations (UVV) with hydraulic drive system, shear impact damping, ram locking, two-hand control Table size depending on shear impact damper: - Without: approx. 1910 x 1360 mm - With: approx. 1600 x 1360 mm Can be offered as-is, ready for operation as currently equipped, or alternatively with new Siemens S7-1500 F control system

Kondisi: bekas, Tahun pembuatan: 1988, Pressure 200 t Stroke 30 - 160 mm Stroke rate 40 - 120 /min Upright gap 1500 / 1300 mm Installation height (stroke + ram adjustment at top) 860 mm Lateral column passage 600 x 530 mm Table area 1250 x 1250 mm Through-opening in table 550 x 300 mm Table height above floor 1000 mm Ram area 1250 x 1000 mm Ram adjustment 125 mm Material width 30 - 500 mm Material thickness 0.5 - 3.0 mm Dkedevut S Dopfx Aaqel Feed length 0 - 999.9 mm Drive power 50.0 kW Weight 34.00 t Space requirements approx. 4.0 x 1.7 x 5.2 m (LxWxH) Approved for automatic operation according to German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in the ram, pneumatic ram weight compensation, motorized ram adjustment, automatic stroke adjustment.