Beli Heinen Ct15(Reduced) bekas (2.756)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, masa garansi: 12 bulan, jenis arus masuk: AC (pendingin udara), lebar produk (maks.): 400 mm, tegangan masuk: 230 V, MINIPACK MEDIA Minipack MEDIA adalah mesin pengemasan semi otomatis yang ringkas dengan penyegelan model L serta terowongan shrink terintegrasi. Dengan konstruksi monoblok, mesin ini sangat hemat tempat. Dedox Ttbhepfx Aiuoch – Batang segel berlapis teflon untuk mengurangi pembentukan asap – Kapasitas produksi hingga 750 unit per jam – Dimensi batang segel: 540 × 400 mm – Lebar maksimum roll film: 600 mm – Diameter maksimum roll film: 350 mm – Ukuran inlet terowongan: 440 × 240 mm – Tinggi meja kerja: 875 mm – Dimensi mesin (tertutup): 2.780 × 730 × 1.400 mm – Berat mesin: 286 kg (netto) – Dilengkapi penggulung limbah bermotor sebagai standar

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, A multihead weigher is a highly precise weighing system that simultaneously weighs products using several load cells. The ideal combination is calculated automatically so that the target weight is achieved with minimal deviation. Multihead weighers are particularly suited for free-flowing products. In combination with a vertical form-fill-seal machine, they enable a continuous, automated packaging process. Multihead weighers reduce product loss through accurate weight combinations and allow for higher output rates, especially for expensive or sensitive products. Features: - Available with 10–36 heads - Automatic frequency control of the vibration ensures even and precise product distribution - Automatic zero setting during operation improves accuracy - Self-diagnosis alarm in popup window, easy troubleshooting - Choice between single or multiple discharge for higher weights - Software-controlled side discharge for non-conforming weights to reduce film and product waste - Live display of individual amplitudes for precise monitoring and control of each vibrator - Live display of individual weight readings - Central load cell supply control replaces the photo sensor - Forced discharge for frozen products prevents melting through non-selection - Weighing cells by HBM - Memory for parameter setting programs - The weigher is also available as a waterproof system at an additional cost Technical Data: - Max. speed: 60 weighings per minute (wpm) - Weight: 430 kg - Weighing range: 10–5000 g Dodpfow Ekh Nox Aiujch - Accuracy: +/- 1.0–1.5 g - Hopper capacity: 1.3L, 2.5L, 4L & 5L - Control panel: 7" touchscreen - Drive system: stepper motor - Level control: load cell - Surface: choice of stainless steel, surface-treated, Teflon (modifications available on request) - Material: stainless steel 304 - Connection: 220V / 50Hz

Kondisi: baru, Tahun pembuatan: 2026, de-hu-001 Djdpewirnxefx Aiuech

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2019, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, berat keseluruhan: 9.500 kg, tahun perombakan terakhir: 2025, lebar bukaan pengisian: 420 mm, panjang bukaan pengisian: 1.250 mm, Technical Data Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (infeed chute): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Output for empty beverage cans with: - one press stroke: approx. 1.7 t/hour - two press strokes: approx. 2.5 t/hour Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight of press: approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant S355 steel Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal scrap, steel sheet, as well as aluminum, brass, and copper waste. Condition of the baling press: The baling press was completely overhauled in our workshop. The press is in very good condition - see the functional video after refurbishment. During relocation, the machine sustained transport damage: the control cabinet was hit by a forklift and is slightly dented, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Notes: Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is available. Viewing by appointment is possible. We are not liable for technical data or possible errors. Dodpfxjzbxvlo Aiuech

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 1.600 kg, tinggi total: 2.780 mm, lebar total: 2.265 mm, panjang total: 2.110 mm, gores kuas bulu: 450 mm, panjang benda kerja (maks.): 1.220 mm, lebar benda kerja (maks.): 870 mm, tinggi benda kerja (maks.): 470 mm, The GF AgieCharmilles FORM 300, built in 2015, is a powerful and precise used die-sinking EDM machine, engineered specifically for demanding applications in tool and mold making. Thanks to its advanced control technology, excellent surface finish, and high efficiency, it offers an outstanding investment opportunity for businesses that prioritize precision and cost-effectiveness. Main Features & Benefits: ✅ Large working area & high load capacity: Travel paths (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with state-of-the-art technology: Positioning accuracy via linear glass scales (no recalibration required) Innovative ISPG generator (Intelligent Speed Power Generator) for maximum efficiency Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Surface quality up to Ra 0.08 µm ✅ Powerful control system & automation: AC FORM HMI with intuitive touchscreen operation Automatic CAD/CAM integration for seamless data transfer Job management with prioritization and real-time monitoring Remote monitoring via SMS notification Dedsw Ebtvjpfx Aiusch ✅ Maximum productivity & flexibility: Automatic 48-position electrode changer for unattended operation Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-frame design for high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with minimal maintenance requirements Ideal for: ✔ High-precision tool and mold machining ✔ Series production with the highest quality standards ✔ Complex geometries and fine surface structures Experience maximum productivity with the GF AgieCharmilles FORM 300 – your solution for precise and efficient die-sinking EDM! 📌 Our used 2015 machine is cleaned, overhauled, and thoroughly tested prior to sale to ensure the highest level of quality and reliability.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 1.600 kg, tinggi total: 2.780 mm, lebar total: 2.265 mm, panjang total: 2.110 mm, gores kuas bulu: 450 mm, panjang benda kerja (maks.): 1.220 mm, lebar benda kerja (maks.): 870 mm, tinggi benda kerja (maks.): 470 mm, GF AgieCharmilles FORM 300 Year of manufacture: 2014 Die-sinking EDM machine in C-frame design (fixed table) with automatic lowering tank Travel axes (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Table dimensions: 750 x 600 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg Innovative ISPG generator (Intelligent Speed Power Generator) for maximum efficiency Maximum working current: 80 amperes Surface finish up to Ra 0.08 µm AC FORM HMI with intuitive user interface & touchscreen Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology Adaptive control (ACC & ACO) for optimized spark erosion and minimized electrode wear Pneumatic chuck of your choice (Erowa or 3R Systems) Including 6-station LTC electrode changer Machine dimensions: 2265 x 2110 x 2780 mm Total weight: 4,500 kg Dcedpfx Aox Sv E Hsiueh The machine will be cleaned, overhauled, and thoroughly tested prior to sale to ensure top quality and reliability. We are happy to offer additional services as well: - Transport - Commissioning - Training - Accessories such as clamping devices

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 600 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 450 mm, berat benda kerja (maks.): 1.600 kg, tinggi total: 2.780 mm, lebar total: 2.265 mm, panjang total: 2.110 mm, gores kuas bulu: 450 mm, panjang benda kerja (maks.): 1.220 mm, lebar benda kerja (maks.): 870 mm, tinggi benda kerja (maks.): 470 mm, GF AgieCharmilles FORM P600 Year of manufacture: 2021 Powerful and precise sinker EDM machine, specifically designed for demanding applications in tool and mold making. Thanks to its advanced control system, excellent surface quality, and high efficiency, it presents an outstanding investment opportunity for companies that value precision and cost-effectiveness. Key Features & Benefits: ✅ Large working area & high load capacity: Travel (X/Y/Z): 600 x 400 x 450 mm Maximum workpiece size: 1220 x 870 x 470 mm Maximum workpiece weight: 1,600 kg Maximum electrode weight: 50 kg ✅ High-precision machining with cutting-edge technology: Positioning accuracy via linear glass scales (no recalibration required) Innovative ISPG generator (Intelligent Speed Power Generator) for highest efficiency Djdpfx Ajyizmijiusch Adaptive control (ACC & ACO) for optimized spark erosion and reduced electrode wear Surface finish up to Ra 0.08 µm ✅ Powerful control & automation: AC FORM HMI with intuitive user interface & touchscreen Automatic CAD/CAM integration for seamless data transfer Job management with prioritization and real-time monitoring Remote monitoring via SMS notification ✅ Maximum productivity & flexibility: Automatic 16-fold electrode changer for unattended operation Intelligent workpiece measurement & 3D correction Reduced electrode wear thanks to iQ technology ✅ Reliability & low operating costs: Robust C-frame design for high stability Efficient dielectric management with 6 filter cartridges Energy-efficient operation with minimal maintenance requirement Ideal for: ✔ High-precision mold and toolmaking ✔ Series production with strictest quality requirements ✔ Complex geometries and fine surface structures The machine will be cleaned, serviced, and thoroughly tested after your order to ensure the highest quality and reliability. We are also happy to commission the machine on site after delivery.

Kondisi: bekas, Tahun pembuatan: 2007, jam operasional: 3.339 h, nomor mesin/kendaraan: LC615, Used ELOPAK SKS-S60S Shikoku Filling Line Technical Data & Performance Specifications This aseptic filling line for gable-top cartons is engineered for premium beverage packaging, providing reliable performance for long shelf-life products. Manufactured by Shikoku Kakoki in 2007, it operates at low running hours and supports multiple carton sizes, enabling flexible production planning in industrial packaging and beverage environments. Manufacturer: Elopak Shikoku Kakoki Model: SKS-S60S Year of Manufacture: 2007 Operating Hours: 3,339 Filling Mode: Aseptic Packaging Type: Gable-top cartons Compatible Formats: 0.5L, 0.75L, 1.0L Electrical Supply: 400 V, 50 Hz, 3-phase Power Consumption: 114 A Compressed Air Pressure: 550–990 kPa Air Consumption: 2,460 NL/min Advanced Automation & Control Systems Designed for aseptic operation, this machine enables precise filling under strictly controlled sterile conditions. The three-phase industrial power supply ensures stable operation and straightforward integration into facility infrastructure. Format changes between 0.5L, 0.75L, and 1.0L cartons are designed to minimize downtime and improve Overall Equipment Effectiveness (OEE) in used or refurbished equipment installations. Dodpfsyz R E Tex Aiusch - Industrial controls for consistent aseptic performance - Process parameters optimized for sterile packaging - User-friendly interface for setup and monitoring - Interlocked access points and safety circuits for safe operation Line Integration Capability This aseptic filler integrates seamlessly into either a used filling line or a new packaging configuration. It is well-suited for connection to upstream carton preparation or sterilization modules as well as downstream closing, date coding, cartoning, and palletizing equipment. The machine supports both inline and standalone operation, depending on the layout of your facility. - Interfaces to conveyor systems and downstream packaging machines - Flexible line positioning for greenfield or retrofit projects - Multi-format capability for 0.5L, 0.75L, 1.0L cartons Machine Condition & Maintenance History With only 3,339 operating hours, this pre-owned aseptic filler shows minimal wear compared to typical lifecycle expectations for industrial packaging machinery. Its configuration and supply ratings are in line with common European plant standards, enabling rapid recommissioning by qualified technicians. - Low operating hours indicate limited usage - Well-maintained aseptic configuration Performance & Versatility Optimized for aseptic beverage production, this unit is ideal for long shelf-life products typically filled into gable-top cartons. Its multi-format capability enables rapid adjustments to varying production demands.

Kondisi: baru, Tahun pembuatan: 2025, de Dcjdpfxjhwv N Hs Aiush

Kondisi: bekas, Tahun pembuatan: 2018, nomor mesin/kendaraan: SCIAC44, Used bottle washer Aesse Service LINE6, year of manufacture 2018 Dcedjvhcplopfx Aiuoh This machine provides a reliable and robust solution for industrial bottling plants. A Esse Service manufactured this model in 2018 to ensure high performance with optimal energy efficiency, while maintaining the quality of the cleaning process. Although previously in use, the machine operated only very minimally, preserving its excellent condition. It is currently in storage. The LINE6 model is designed for standard 0.75 L glass containers and operates at a throughput of 900 bottles per hour (BPH). Technical data of the Aesse Service bottle washer The used Aesse Service LINE6 bottle washer, year 2018, ensures consistent output with an energy consumption of 2 kW. The machine is powered via high voltage (A.T.) at 400 V AC ±10% with neutral and ground, while the control circuits operate at low voltage (B.T.) 24 V DC ±10%. The machine supports a frequency range of 50 to 60 Hz, making it adaptable for different industrial standards. Pneumatics system The machine requires a compressed air supply of 6 bar and consumes 500 liters per minute to operate effectively. This constant airflow enables precise washing cycles, which is crucial in bottling lines since the regular airflow directly affects product quality. Furthermore, the steady supply of air ensures long-term operational reliability. Dimensions and weight Thanks to its compact design, the used Aesse Service LINE6 bottle washer from 2018 can be easily integrated even in confined workspaces. Accordingly, the machine measures 1300 x 1300 x 1600 mm (L x W x H) and has a dry weight—meaning without liquids or filled lines—between 300 and 500 kg. The moderate weight streamlines transport and installation, making the LINE6 model practical and versatile for various industrial applications. Container capacity The used Aesse Service LINE6 bottle washer, year of manufacture 2018, processes bottles ranging from a minimum volume of 0.5 liters up to a maximum of 1.5 liters, providing high production flexibility. This capacity covers the standard formats commonly used in the beverage industry and meets diverse cleaning requirements. Bottle diameter and height Additionally, the machine can accommodate bottles with a diameter of 55 mm to 115 mm, allowing for secure handling of various glass containers during cleaning. Bottle heights from 160 mm to 345 mm are also supported. Companies benefit from being able to use different formats without frequent equipment changes. Performance and reliability Thanks to its robust build and advanced design, the bottle washer offers long-lasting performance. Its layout minimizes routine maintenance efforts, which is essential for continuous operation in industrial bottling lines. Because this machine has only seen minimal use to date, this further enhances its reliability. With a capacity of 900 BPH, the model...

Kondisi: bekas, translation_001 Dedpfx Aszbynvoiuoch

Kondisi: bekas, Tahun pembuatan: 2016, daya: 7 kW (9,52 hp), panjang benda kerja (maks.): 3.000 mm, lebar benda kerja (maks.): 920 mm, tinggi benda kerja (maks.): 50 mm, tinggi total: 1.950 mm, panjang total: 2.100 mm, lebar total: 1.605 mm, berat keseluruhan: 850 kg, Perlengkapan: Penandaan CE, 3275 CNC machining center Format4 c-express 920 classic Used, year of manufacture 2016 CNC machining center / CNC drilling center for bottom-side drilling, sawing, and milling operations Max. workpiece dimensions: X 3000 mm / Y 920 mm / Z 50 mm Min. workpiece dimensions: X 280 (270) mm / Y 180 (70) mm / Z 10 mm Includes collet chuck system for CNC throughfeed technology Laser “0” double reference Drilling head DH15 6H1S (9 vertical and 6 horizontal drilling spindles / 1 grooving saw in X-direction) User-friendly operation via graphical user interface 1 machine software license 1 machine workstation with CAD functionality 19” LCD color display, mouse and keyboard Additional roller supports to reduce minimum workpiece width to 70 mm 1 milling spindle 3.3 kW (S1) / ER32 manual collet chuck / max. speed 24,000 rpm 1 additional vertical clamp 1 roller table extension, front and rear 1 DP shank cutter D12/NL23.5/Z2+2+Q/GL80/S20 RL diamond version 1 collet 20 mm ER32 DIN 6499 2 dowel drills HW/D5/NL43/S10x20/GL70/RL 3 dowel drills HW/D5/NL43/S10x20/GL70/LL 1 through-hole drill bit HW/D5/NL44/S10x20/GL70/LL 3 HW dowel drills for blind holes with back guide, right-hand, D=8 mm, BT=30 mm, GL=57.5 mm, shank 10x20 mm 3 HW dowel drills for blind holes with back guide, left-hand, D=8 mm, BT=30 mm, GL=57.5 mm, shank 10x20 mm 1 dowel drill HW/D8/NL43/S10x20/GL70/LL 1 fitting drill HW/D15/S10x26/GL70/Z2+2/RL 1 fitting drill HW/D35/S10x26/GL70/Z2+2/RL 1 circular saw blade HW: 100x5/3.6x20 Z24/FZ without auxiliary holes X-axis speed 25 m/min Y-axis speed 25 m/min Z-axis speed 15 m/min Electrical connection 7.0 kW Drilling head motor power 1.5 kW Drilling head speed 3,600 rpm Saw unit speed 9,000 rpm Max. number of horizontal spindles 2+2, 1+1 / spacing horizontal spindles 32 mm / max. diameter horizontal spindles 15 mm Max. number of vertical spindles 9 / spacing vertical spindles 32 mm / max. diameter vertical spindles 8x 15 mm, 1x 35 mm Max. circular saw blade diameter 100 mm Max. horizontal drilling depth 30 mm Max. vertical drilling depth 55 mm Min. workpiece length 270 mm Compressed air connection: operating pressure 6 - 8 bar / nominal air consumption 60 NL/min / air consumption 1,650 m3/h Extraction: extraction hose diameter 140 mm / min. air speed 26 m/s / min. nominal negative pressure 1,000 Pa / min. air volume flow 1,440 (1,050) m3/h Safety equipment according to CE conformity Including operating manual Transport dimensions approx. 2100 x 1605 x 1950 mm (LxWxH) Weight approx. 850 kg Sale on behalf of customer, ex location near 65929 Frankfurt am Main, without dismantling, transport, or assembly Dismantling, loading, and transport by us available as an option Errors in description and pricing reserved Djdpfxjzbcrde Aiujch To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, applies: "purchased as inspected" Pictures and videos are examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Kondisi: bekas, Tahun pembuatan: 2020, Maximum workpiece length: 3740 mm Milling spindle: 1 unit Main motor: 15 kW Control system: CNC Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of client ----- - From a timber window manufacturing operation. - Machine still connected and ready for demonstration - Sold without machining tools Technical Description (Summary, see PDF for full details): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depends on clamping system, see layout. Travel distances: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speeds: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 – 24,000 rpm Dsdsyq Sztopfx Aiusch - Additional locking system for the C-axis - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in X direction, 5 spindles in Y direction, grooving saw in X direction) Horizontal drilling unit with 6 spindles, 4 spindles in X direction and 2 spindles in Y direction. 1 grooving saw in X direction, max. diameter 120 mm - Disc tool changer with 24 tool positions on the right of the machine frame Max. tool diameter 240 mm Max. tool height 370 mm - Tool change station for circular saw blade mounted on the cantilever/tool changer, Max. saw blade diameter 350 mm - Tool changer on the left of the machine frame with 10 tool positions. Max. tool diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - Disc tool changer with 24 tool positions mounted on the cantilever, travelling in the X direction Max. tool diameter 240 mm Max. tool height 370 mm - Moving pick-up position for chip deflector - 6 workpiece supports, s-motion, position controlled - 2 machining fields for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved element machining - Includes all existing solid wood clamps and vacuum suction pads - Automatic central lubrication - CE safety equipment - “WoodFLash” software Lamello Clamex P Macro Cut-out Macro - “Greenline package” for reduced energy consumption ----- Price for the above machine on request! ----- Optional new Oppold tool set for H500: -Windows Timber windows IV 68, 78, and 88 inward-opening, with changeable rebate at the sides and top. Glass rebate 20 mm, frame and sash side 20° beveled with loose and pre-machined glazing bead Old building timber windows IV 68, 78, and 88 inward-opening, without rain rail, with changeable rebate at the sides, top, and bottom. Glass rebate 20 mm, frame & sash side 15° beveled Removable weather board Timber-aluminium window (System supplier: Gutmann Mira, bevel rebate system) HA IV 68, 78, and 88, inward-opening, 2 sash variants: square and bevelled, Changeable rebate at the bottom, sides, and top -Entrance door Timber HTIV 68, 78, and 88 with single rebate in the frame and double rebate in the sash inward-opening, 1 sash variant, glass rebate, without changeable rebate Offset construction Timber-aluminium IV 68, 78, and 88 with single rebate in the frame and double rebate in the sash -Lift and slide door Timber HS IV 68, 78, and 88, without frame production Timber-aluminium HS IV 68, 78, and 88, without frame production Execution...

Kondisi: baru, Tahun pembuatan: 2026, The shredder breaks down large bulky pieces of polystyrene and EPS, as well as similar materials with a maximum bulk density of 30kg/m³, into small pieces. The shredder reduces the volume by approximately 65%. This machine is therefore ideally suited for use in industrial and craft businesses, as well as for wholesalers and retailers dealing with polystyrene packaging materials. Throughput capacity: Screen 10 mm: approx. 3 m³/h Screen 20 mm: approx. 8 m³/h Screen 30 mm: approx. 13 m³/h Screen 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Depending on the screen set used, simply shredding your polystyrene waste achieves a volume reduction of 3:1. Special designs are available on request. Dodpfoxlzkrex Aiujch VAT is shown separately on the invoice. Nationwide shipping within Germany included, surcharge applies for islands. If you have any questions, please feel free to contact us.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, The shredder breaks down large bulky pieces of polystyrene and EPS, as well as similar materials with a maximum bulk density of 30kg/m³, into small pieces. The shredder reduces the volume by approximately 65%. This machine is therefore ideally suited for use in industrial and craft businesses, as well as for wholesalers and retailers dealing with polystyrene packaging materials. Throughput capacity: Screen 10 mm: approx. 3 m³/h Screen 20 mm: approx. 8 m³/h Screen 30 mm: approx. 13 m³/h Screen 40 mm: approx. 18 m³/h Screen 50 mm: approx. 23 m³/h Depending on the screen set used, simply shredding your polystyrene waste achieves a volume reduction of 3:1. Special designs are available on request. VAT is shown separately on the invoice. Nationwide shipping within Germany included, surcharge applies for islands. Dcedoza D U Repfx Aiush If you have any questions, please feel free to contact us.

Kondisi: sangat baik (bekas), Nomor katalog 7266 DATA TEKNIS - Lebar poros: 530 mm - Poros 4 pisau - Sisir peredam suara - Pelindung poros - Panjang meja: 2900 mm - Meja masuk lebih panjang: 1655 mm Dcjdezabw Nopfx Aiujh - Meja dari besi cor - Kedua meja dapat diatur - Pemandu asli dari besi cor, dapat disetel - Rem - Diameter saluran ekstraksi: 140 mm - Motor: 4 kW - Dimensi (P/L/T): 2900x1000x1210 mm - Berat: 695 kg KEUNGGULAN – Produksi Jerman – Poros 4 pisau – Rem – Sisir peredam suara – Meja masuk lebih panjang – Tidak dicat ulang – Mesin jointer bekas, kondisi sangat baik Foto asli Video pengoperasian mesin: youtube.com/watch?v=v_3ECkLDWVI Harga netto: 18.900 PLN Harga netto: 4.500 EUR tergantung kurs 4,2 EUR (Harga dapat berubah sesuai fluktuasi nilai tukar yang signifikan)

Kondisi: bekas, Tahun pembuatan: 2011, Base machine M800 X5 TV 1 WORKING FIELD X: 5,020mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm pod height) MACHINE STRUCTURE The base structure is a monolithic design made of thick-walled steel. It is reinforced over the entire machine bed with welded-in parts, providing exceptional stability. The table design, featuring a large base, is the key to ensuring lasting precision and stability. The machine layout allows the operator to achieve optimal workflow despite minimal space requirements. The mobile gantry is built from a solid monoblock. It is positioned in the X direction on prismatic, ground guides using ball recirculation carriages. Mounted on this mobile unit carrier, the working unit is also installed on prismatic, ground guides and ball recirculation carriages. AXIS MOVEMENT All axis movements are performed on large cross-section prism linear guides with ball recirculation shoes offering extensive contact area, ensuring optimal sliding even at the highest speeds and accelerations. Precise and swift positioning of the moving gantry (X-axis) is achieved via helical rack and pinion drive. Large cross-section ball screws guarantee accurate positioning of the working unit along the mobile gantry (Y- and Z-axes). Perfect mechanical dynamics and maximum positioning accuracy are governed by premium quality drives and brushless motors. Maximum axis speeds: - X-axis = 90 m/min - Y-axis = 90 m/min - Z-axis = 30 m/min Dcjdpfx Aisxy Tmneuoh SAFETY DEVICE WITH BUMPER AND LIGHT CURTAIN 1 Bumpers with sensors are fitted around the mobile stand, and a light curtain system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower rate of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions associated with safety mat systems. This prevents undesired interruptions of the machining cycle and allows greater freedom of movement around the work table. CE Certificate for the safety system 1 Safety enclosure 1 Safety enclosure lateral and rear Automatic centralized lubrication controlled via CNC 1 Lubrication of X, Y, and Z axes governed at regular intervals by CNC control, eliminating manual intervention at the machine. Central extraction nozzle 1 All individual extraction ports of the machining units are merged into one central port. Inside the port, various slide valves are controlled by the NC system, reducing the required extraction air volume. Chip conveyor 1 Maxi – 5 axis electrospindle 11 kW HSK-63 “Prisma K” 1 5-axis electrospindle with 11 kW power at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left / right Liquid cooling Tool interface: HSK-63F 18 kW inverter for stepless, uniform power delivery Max. rotation B-axis = 200° (+/-100°) C-axis = 650° Thanks to non-orthogonal axes, complex horizontal positioning can be performed in compact working spaces. This allows machining of complex geometries without the risk of collision.

Kondisi: baru, Tahun pembuatan: 2026, jenis kontrol: Kontrol CNC, jenis aktuasi: hidrolik, produsen pengendali: ELGO, model controller: ELGO P40T 5,7 ", lebar kerja: 4.000 mm, laju langkah (min.): 12 rpm, ketebalan lembaran (maks.): 16 mm, ketebalan pelat baja (maks.): 16 mm, penyesuaian pengukur belakang: dikendalikan CNC, daya: 30 kW (40,79 hp), masa garansi: 12 bulan, Perlengkapan: Pelat tipe tersedia, Penandaan CE, dokumentasi / manual, henti darurat, kendali jauh kaki, perlindungan jari, HGM B16-4000 – 16 mm x 4000 mm Hydraulic Guillotine Shear Manufactured in Turkey by CRONOSSTECH, the HGM B16-4000 Hydraulic Guillotine Shear is designed for heavy industry, steel construction, shipbuilding, machinery manufacturing, and high-capacity sheet metal processing applications, featuring a 16 mm cutting capacity and a cutting length of 4000 mm. Equipped with the ELGO P40T touch CNC control unit, automatic blade gap adjustment system, motorized backgauge, and Rexroth hydraulic system, it delivers precise and efficient cutting performance. Standard Features - Throat Depth: 250 mm - Cutting Length: 4000 mm - Distance Between Columns: 4580 mm - Cutting Capacity: 16 mm - ELGO P40T 5.7” Touch CNC Control Unit - 5.7” TFT touch screen - Manual operation mode - Single-piece processing - Program memory - Digital outputs up to 2A - Automatic calculation of blade gap, cutting angle, and hold-down adjustment based on material - Automatic cutting program - Rear Sheet Support System with RTS Function - Automatic Blade Gap Adjustment System - Automatic calculation and adjustment according to the sheet thickness to be cut - Programmable Backgauge Return System - Automatic lifting for parts over 1000 mm - X-Axis Motorized NC Controlled Backgauge - X-axis travel distance: 1000 mm - Speed: 150 mm/s - Precision: ±0.05 mm - Steel frame - Hardened ball screw - Front Support Arms - Length: 1000 mm - Ruler - T-slot - Swing-away stop - Front Finger Guard (Openable) - 1000 mm openable front guard cover - Upper Blade - 2 cutting edges Dcodpfxszbqzyj Aiujh - 450 N/mm² capacity - Lower Blade - 4 cutting edges - 450 N/mm² capacity - Foot Pedal with Emergency Stop - Rear Safety System (EOS2E 2BX) - 2 laser beams - Type 2 – SIL1 safety level - 510 mm monitoring height - 3 ms response time - IP65 / IP67 protection class - Shadow Line Cutting Light - Ball Transfer Table - Schneider or Siemens Electrical Components (400V / 50Hz) - Premium Front and Rear Cabinet Guards - Rexroth Hydraulic System - Energy Saving Standby Mode Optional Features - Pneumatic Sheet Support System (Type 2 – 4 Position RTS Function) - 4-position pneumatic support system - Stable support for large sheets - Reduces sheet bending and deformation - RTS (Return To Sender) function - Enhances operator comfort and safety - Extended X-Axis Backgauge - 1250 mm - 1500 mm - Extended Front Support Arms - 1500 mm - 2000 mm - 3000 mm - Full-Length Openable Front Guard System Technical Specifications - Cutting Capacity (450 N/mm²): 16 mm - Cutting Capacity (700 N/mm²): 10 mm - Cutting Length: 4000 mm - Cutting Angle: 0.5° – 3.0° - Number of Hold-Down Cylinders: 18 - Cutting Speed / Fast Mode: 6 / 12 strokes per minute - Distance Between Columns: 4580 mm - Table Height: 1010 mm - Table Width: 700 mm - Throat Depth: 250 mm - Backgauge Stroke (X-Axis): 1000 mm - Machine Length: 5980 mm - Machine Width: 3750 mm - Machine Height: 2825 mm - Oil Tank Capacity: 390 L - Motor Power: 30 kW - Machine Weight: 21.5 Tons This machine is manufactured in Turkey by CRONOSSTECH. 🇹🇷

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, 2 STK. AUF LAGER, BAUJAHR 2015 UND 2013. Schwerlast-Palettenabwickler mit integrierter Präzisions-Richtkopfeinheit, ausgelegt für das Zuführen von Coilband in Stanzanlagen und weitere Folgeprozesse. Der große, 1.500-mm-Drehtisch nimmt komplette, palettierte Coils bis 3.000 kg auf, während der 9-Walzen-Richter (5 angetriebene Unter-, 4 Oberwalzen) für ein flachheits- und spannungsarmes Band direkt zur Weiterverarbeitung sorgt. Sowohl Drehtisch als auch Richtkopf sind frequenzgeregelt einzeln angetrieben, was eine präzise Steuerung von Vorschubgeschwindigkeit und Bandspannung ermöglicht. Ideal für Stanzlinien, bei denen Coilmaterial auf Paletten statt auf Dorn geliefert wird – dies macht separate Coilausleger und das Umrüsten überflüssig und reduziert Rüstzeiten. Technische Daten: - Tischdurchmesser: 1.500 mm - Traglast Tisch: 3.000 kg - Max. Tischdrehzahl: 10 U/min - Bandgeschwindigkeit: 10 m/min (bei Kern-Ø 300 mm) - Stanzrichtung: von links nach rechts - Aufwickelrichtung: im oder gegen den Uhrzeigersinn (wählbar) - Max. Banddicke: 1,5 mm - Max. Bandbreite: 220 mm - Drehtischantrieb: 2,2 kW, frequenzgeregelt Dodpfxozav Ngj Aiusch - Drehtischlagerung: Vierpunktlager - Richtkopf: 9 Walzen (5 unten, 4 oben) - Walzendurchmesser: 40 mm - Unterwalzen: alle angetrieben - Richtwerksantrieb: 0,75 kW, frequenzgeregelt - Elektrischer Anschluss: 3×400V + N + PE, 50 Hz, 16 A - Abmessungen (L × B × H): 2.250 × 1.500 × 1.700 mm - Gewicht: ca. 750 kg - Lackierung: RAL 7035 lichtgrau, strukturiert

Tahun pembuatan: 2025, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, This is a commercial dishwasher from manufacturer Hobart, model AMXXL-10B, year of manufacture: 2025. The machine is offered with both inlet and outlet tables; inlet on the left and outlet on the right (equipped with splash guard). Additionally, the machine comes equipped with a pre-rinse spray arm and a sink, as well as an external water softener. The setup can also be arranged in a corner configuration without difficulty. The dishwasher has undergone inspection in our in-house workshop and is fully operational. The first commissioning took place on 9.4.2025, and the machine has only logged 601 operating hours and 14,730 wash cycles. The manufacturer's recommended retail price for the machine including infeed/outfeed tables is €30,178.40 (gross). Our special price: €13,990 gross. You will receive an invoice with VAT shown separately. Our used equipment service for you: - 6-month warranty on all electrical parts, limited to the replacement of defective parts (excluding labour for removal and installation) - High-quality branded equipment at fair prices - Professionally refurbished/inspected and thoroughly cleaned - Tested & fully functional – or your money back - Flexible shipping or self-collection options - Competent advice – before and after purchase - Provision of user manuals, wiring diagrams, and spare parts - Safety inspection according to DGUV V3 Technical data: External dimensions (WxDxH): 803 x 802 (without handle) x 1610 mm (2195 mm with hood open) Infeed table: 1200 mm long / Outfeed table: 700 mm long Total width: approx. 2703 mm Electrical connection: 400V / 50 Hz, 15.9 kW Year of manufacture: 2025 52/75/180 sec. and special programs Water consumption: 1.8 L/basket Tank volume: 40 liters Basket size: 500 x 500 mm / 600 x 500 mm Insertion height: 540 mm Condition: Used, inspected, and fully operational Base model features: - Pass-through dishwasher, straight or corner installation - Capacity up to 70 baskets/h, 1,680 plates/h, 2,520 glasses/h, 560 baking trays/h, 140 1/1 GN containers/h, 70 EN containers/h - Enlarged interior, usable area 660 x 500 mm - Above-average loading height of 540 mm - 7 automatic programs: Short, Standard, Intensive, Continuous wash, Hygiene, E-Save, and Starch Removal - Multi-Setting: Heater output can be reduced from 12.2 kW to 6.1 kW for sites with hot water connection - Heat and sound insulated hood - Soil (dirt) detection system Dedpfxjzap Dqj Aiujch - Integrated WiFi module - Multi-phase self-cleaning program - USB interface for exporting operating and hygiene data - Plug-and-play installation: Inlet and outlet hoses, connection cable, detergent dosing pump, rinse aid dosing pump, rinsing pump, drain pump, backflow preventer - Hood, tank, frame, and housing all in CrNi steel 1.4301 - Includes: 11 plate racks P-18-12, 1 tray rack T-06-09, 1 universal rack C-01-07 Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by agreement Subject to changes and errors. Do you have questions, need advice or wish to view the equipment in person? You can reach us by phone during our business hours: Monday–Friday, 09:00–13:00 and 14:00–17:00. Sale is subject exclusively to our General Terms and Conditions (AGB).

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 500 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 650 mm, panjang umpan sumbu Y: 500 mm, panjang umpan sumbu Z: 500 mm, produsen pengendali: Siemens, model controller: Sinmerik One, tinggi benda kerja (maks.): 500 mm, diameter benda kerja (maks.): 675 mm, berat benda kerja (maks.): 500 kg, tinggi total: 3.610 mm, panjang total: 3.970 mm, lebar total: 3.523 mm, beban meja: 500 kg, diameter meja putar: 600 mm, kecepatan rotasi (maks.): 14.000 rpm, berat keseluruhan: 11.800 kg, kecepatan spindel (maks.): 14.000 rpm, pasokan pendingin: 15 batang, jarak meja ke pusat spindel: 175 mm, jarak dari tengah meja ke hidung spindel: 400 mm, daya motor spindle: 37.000 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 30, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 8 g, Perlengkapan: dokumentasi / manual, konveyor serpihan, HWACHEON D2-5AX Anniversary Model – The Intelligent Entry into 5-Axis Machining The new HWACHEON D2-5AX has been specifically developed to provide companies with an economical yet powerful entry point into modern 5-axis machining. As HWACHEON’s official anniversary model, it combines the highest manufacturing quality, state-of-the-art control technology, and maximum flexibility for a wide range of applications. Whether for single-part production, tool making, prototyping, or automated series production, the D2-5AX impresses with high precision, reliable processes, and a compact design paired with a generous working area. With travels of 650 x 500 x 500 mm and a high-performance rotary table with a 600 mm diameter, complex workpieces can be machined in a single setup. This minimizes setup times, increases accuracy, and sustainably boosts productivity. Standard features include automatic BLUM tool measurement (ZX Speed) and BLUM workpiece measurement, ensuring minimized setup times and high process reliability. Technical Highlights • Travels X/Y/Z: 650 / 500 / 500 mm • Rotary table Ø 600 mm • Powerful 37 kW main spindle drive • 30-position tool magazine • Automatic BLUM ZX Speed tool measurement • Automatic BLUM workpiece measurement • Compact, rigid machine construction • High dynamics and precision • Suitable for single parts, small series, and mass production • Optimized for modern manufacturing requirements Dcjdpfx Aszaql Njiuoh Control Options The HWACHEON D2-5AX is available with: • Siemens Sinumerik ONE for maximum connectivity and digitalization • Fanuc 31i-B5+ for maximum reliability and user comfort in 5-axis operation • Optional: cost-efficient Fanuc 4+1 axis variant Your Benefits ✔ Cost-effective entry into 5-axis machining ✔ Reduced setup times through complete machining in a single setup ✔ High manufacturing quality and process reliability ✔ Future-proof control technology ✔ Ideal for training centers, toolmakers, job shops, and production companies ✔ New machine featuring the latest HWACHEON technology The HWACHEON D2-5AX offers an exceptional combination of precision, performance, and cost-effectiveness, making it the ideal solution for companies aiming to take their manufacturing to the next level. Further information, technical data, and individual configuration options available on request. Contact: Benjamin Hoffmann – ACROLOC Werkzeugmaschinen GmbH.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, gaya penjepit: 2.700 kN, Engel DUO 36060/2700 TECH (2024) Dcsdpfxey U Hu Ro Aiush

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, gaya penjepit: 24.000 kN, ENGEL DUO 23060/2400 TECH Manufacturer: ENGEL CLAMPING UNIT Clamping force: 24,000 kN (2,400 t) Opening stroke: 3,200 mm Max. platen daylight: 4,000 mm Min. mould height: 800 mm Max. mould height: 2,000 mm Tie bar distance (H × V): 2,020 × 1,620 mm Platen dimensions (H × V): 2,700 × 2,430 mm Ejector force: 614 kN Ejector force with pressure plate: 1,600 kN Dry cycle time (Euromap 6): 5.4 s INJECTION UNIT Screw diameter: 150 mm L/D ratio: 25:1 Screw stroke: 680 mm Shot volume: 12,020 cm³ Theoretical shot weight (PS): approx. 10.9 kg Injection rate: 2,121 cm³/s Injection pressure (regenerative): 1,601 bar Maximum injection pressure: 1,900 bar Screw speed: 90 rpm Max. screw speed: 115 rpm Screw torque: 18,600 Nm Reduced torque at max. speed: 14,550 Nm Plasticizing capacity (3-zone screw): 235 g/s Plasticizing capacity (barrier screw): 322 g/s NOZZLE Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Dcjdpjy U Hphefx Aiuoh Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 10 Installed heating capacity: 97.4 kW DRIVE Installed motor power: 265 kW Hydraulic oil tank capacity: 1,600 l COOLING REQUIREMENTS Cooling capacity: 45.2 kW Water consumption (32 °C inlet): 6.6 m³/h Additional features: Cores: 3+3 Heating zones: 160 Cascade control: 56

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2008, jam operasional: 20.000 h, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: listrik, jenis laser: Laser CO₂, daya laser: 4.000 W, AMADA LC 3015 X1 NT – Laserleikkauskone myytävänä Myytävänä: käytetty CO₂-laserleikkauskone, valmistaja Amada, malli LC 3015 X1 NT. Luotettava, teollisuustason laite tunnetulta japanilaiselta valmistajalta – erinomainen tarkkaan teräksen, ruostumattoman teräksen ja alumiinin leikkaukseen. Yleistiedot Valmistusvuosi: 2008 Käyttötunnit: n. 20 000 h Laserlähteen teho: 4 kW Työalue ja liikenopeudet Pituussuuntainen liike (X): 3 000 mm Poikittaissuuntainen liike (Y): 1 500 mm Pystysuuntainen liike (Z): 120 mm Nopeat liikkeet X/Y: 85 m/min Pystysuoran liikkeen nopeus: 60 m/min Työkappaleen suurin sallittu paino: 730 kg Leikkauskapasiteetti Mustateräs: max. 20 mm Ruostumaton teräs: max. 15 mm Dodpfjy Hxy Nex Aiusch Alumiini: max. 12 mm Varustus Donaldson-suodatinjärjestelmä Levyn varastointijärjestelmä (ei kaksoispöytää) Mitat ja paino Kokonaismitat: noin 6 670 × 2 360 × 2 100 mm Kokonaispaino: 11 700 kg Miksi valita tämä kone? Amada LC 3015 X1 NT on todellinen työjuhta ohutlevyjen käsittelyyn. Reilu 3 × 1,5 m työalue mahdollistaa vakiolevyjen käsittelyn yhdellä asetuksella, ja integroitu levyn varastointijärjestelmä nopeuttaa materiaalinkäsittelyä ja vähentää manuaalista syöttöä. 4 kW laser antaa riittävästi tehoa paksumpienkin materiaalien leikkaukseen, ja Donaldsonin suodatinjärjestelmä pitää työympäristön puhtaana. Toimitus ja tiedustelut Kone myydään sellaisena kuin se on. Lisätietoja, kuvia sekä tarjoukset purusta, kuljetuksesta ja mahdollisesta käyttöönotosta saatavilla pyynnöstä.

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: LC611, Used Tetra Pak UHT System 5000 LPH Technical Specifications & Performance Data This Tetra Pak UHT system Steritherm (Model VTIS C-4) is a robust, pre-owned processing unit designed to deliver consistent ultra-high temperature treatment for beverage production and industrial packaging operations. Engineered for high reliability and easy integration with downstream filling and packaging equipment, it provides stable thermal performance and sanitary operation for modern beverage processing lines. Manufacturer: Tetra Pak Model: VTIS C-4 Steritherm Year of Manufacture: 2017 Capacity: 5,000 L/h Maximum Process Temperature (indicative): up to 148°C (according to inspected pressure section) Scope of delivery includes: - Alfa Laval SHL-20 Homogenizer (250 bar) - Alfa Laval H7-RC Plate Heat Exchanger (198 L) - Pump station with Alfa Laval LKH-10 and LKH-107 - ABB drive and CIP controller Design: Continuous UHT treatment with integrated homogenization and plate heat exchanger Construction: Hygienic stainless steel process components Advanced Automation & Control Systems The system includes computerized control for precise process management, delivering stable time-temperature profiles and consistent product quality. Automated monitoring of critical parameters helps minimize product loss and optimize energy consumption. Safety interlocks and measuring instruments ensure secure operation during heating, holding, and cooling phases. - Central computer control for process sequences and alarms - Integrated CIP controller for optimized cleaning procedures - Process instrumentation for pressure, temperature, and flow regulation - CE-marking at component level for included Alfa Laval equipment Integration Options for Production Lines Designed for seamless integration into a used filling line or new production layouts, this UHT system can be smoothly connected with upstream raw material handling as well as downstream filling and packaging lines. It supports industrial packaging workflows for PET and glass filling operations by delivering heat-treated product to the fillers. - Inline compatibility with fillers, buffer tanks, and conveyors - Ideal for beverage production environments requiring continuous throughput of 5,000 L/h - Flexible process connections for integration into existing pipelines and CIP loops Djdpfx Aey Ef T Toiujch - Suitable for upgrades in used plants or capacity expansions Machine Condition & Maintenance History This unit is offered as an operational, used UHT system. Auxiliary components show evidence of professional maintenance, including a recent service label on the Alfa Laval pump (dated 04/24) and inspection reports for pressure-bearing components. Operational status: ready for use Inspection markings available on pressure sections