Beli Hurco Vmx 24 T bekas (78.601)

Kondisi: belum diuji (bekas), Tahun pembuatan: 2003, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 660 mm, jarak gerak sumbu Z: 640 mm, Kontrol Ultimax Spindle BT 40 baru tahun 2020 Kecepatan 10.000 rpm Perjalanan 1270x660x640 mm Dcsdpjxu Ikqofx Ac Tji Penukar alat 24 posisi Konveyor serbuk

Kondisi: bekas, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction: 1996 CNC Path Control Ultimax 3 Travel paths X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with coolant groove) 1120 x 500 mm Spindle taper SK 40 Distance spindle nose - table 150 - 760 mm Overhang 450 mm Spindle speed 80 to 8000 rpm, stepless Feed rate 3 to 16,000 mm/min Rapid traverse 24 m/min Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) Dcsdotrhq Hopfx Ac Toi - electronic handwheel - Indirect measuring system with rotary encoders mounted on the ballscrew - Tool changer with 24 tool positions - Fully enclosed safety cabin with sliding door - Swiveling control panel - Yaskawa spindle drives (Japan) - Pneumatic mechanical tool clamping system - Coolant system externally mounted, pushed in from the rear - Tank flushing Machine width 2400 mm Space required for transport L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg Good condition

Kondisi: bekas, cnc-vertikal-bmc25m-en Dedpfxew Nklho Ac Toci

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 47.627 h, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 650 mm, jarak gerak sumbu Z: 610 mm, produsen pengendali: HURCO, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 3, el Dcsdpfsy Sg Npex Ac Tji

Kondisi: bekas, Tahun pembuatan: 1999, x-travel 610 mm y-travel 405 mm z-travel 510 mm Table clamping surface 760 x 400 mm Spindle taper SK 40 Stepless spindle speeds 80 - 8000 rpm Spindle motor 7.5 kW Spindle torque max. 142 Nm Feed rates 3.0 - 7600 mm/min Rapid traverse - longitudinal/cross/vertical 24 / 24 / 15 m/min Distance table / vertical milling spindle max. 600 mm Table load capacity 350 kg Number of tool magazine positions 24 Dodpfxsvh Nbuj Ac Tjci Tool diameter (fully loaded) 80 mm Tool length max. 300 mm Tool weight max. 6.8 kg Control ULTIMAX SSM Total power requirement 18 kVA Machine weight approx. 4.1 t Accessories: 2 tool holders SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant system

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 610 mm, jarak lintasan sumbu Y: 405 mm, jarak gerak sumbu Z: 510 mm, berat keseluruhan: 4.000 kg, kecepatan spindel (maks.): 8.000 rpm, commande-ultimax-vmc Dcodpfxoy T Ekbs Ac Toi

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, Travel distances X: 290 mm Travel distances Z: 560 mm Travel distances W: 640 mm Travel distances Y: ±55 mm Main Spindle Main spindle power: 28 kW Main spindle torque: 242 Nm Spindle nose: A2-6 Bar capacity: 64 mm Max. swing diameter: 508 mm Chuck diameter: 203 mm Spindle speed: 4,500 rpm Feeds Feed rate X: 24 m/min Feed rate Z: 30 m/min Feed rate W: 30 m/min Feed rate Y: 12 m/min Turret Turret: 12 stations Tool holders: VDI40 Max. boring bar diameter: 40 mm Shank cross-section: 25×25 mm Live Tools Live tool speed: 4,000 rpm Live tool power: 5.4 kW Live tool torque: 24 Nm Indexing time: 0.16 s Sub Spindle Sub spindle max. speed: 6,000 rpm Sub spindle torque: 70 Nm MACHINE DETAILS Electrical connection values: 66 kVA / 95 A / 400 V Air connection values: 7 bar / 150 l/min Weight: 7,000 kg Operating Hours On-time hours: 60,496 h Spindle hours: 19,299 h EQUIPMENT Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000 Various channels Chip conveyor Tool setter Transformer Cooling unit Coolant tray Fixed and driven tool holders Dcsdpey Dgfbjfx Ac Tei Replacement main spindle (unregenerated) Various collet chucks size 65 Documentation (circuit diagrams, operator manual, etc.)

Kondisi: baik (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, de-to-hu-001 Dedpfx Acexwmgij Teci

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Joystick baru sebagai pengganti trackball Hurco Ultimax 4 Dijual joystick baru untuk sistem kontrol CNC Hurco dengan Ultimax 4. Joystick ini menggantikan trackball Hurco original dan sangat cocok sebagai alternatif modern dan kokoh bila trackball bermasalah atau tidak akurat. Pemasangan sangat mudah dan dapat dilakukan sendiri dalam beberapa menit. Tidak memerlukan keahlian khusus. Panduan video pemasangan tersedia secara online (kata kunci youtube: "HuStick4 - Joystick passend zu Hurco Ultimax 4"). Dcodpfoy N Eppsx Ac Tsi

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 12.000 h, Hurco VMX42i Dcedpfxori N A Ho Ac Tsi WinMax control Table clamping surface: 1270 x 610 mm Table load capacity: 1750 kg Traverse paths: X-axis: 1067 mm y-axis: 610 mm z-axis: 610 mm Tool holder: SK 40 Max spindle speed: 12,000 rpm Max spindle power: 18 kW Tool changer: 30 positions Max tool diameter: 80/76 mm Tool length: 300 mm Machine weight: 6,850 kg Coolant tank capacity: 484 liters

Kondisi: bekas, Tahun pembuatan: 2021, de_001 Dcsdpfx Acey Nfabo Toi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, HURCO TMX8MYS Djdpoxg D A Hsfx Ac Teci H-TS8034 Tahun pembuatan: 2011

Kondisi: bekas, Tahun pembuatan: 2004,

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, hurco-vmx30-specs-de Dcsdpfx Acsx D Ikpe Tei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, jam operasional: 3.112 h, jarak pergerakan sumbu X: 760 mm, jarak lintasan sumbu Y: 510 mm, jarak gerak sumbu Z: 610 mm, beban meja: 1.000 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 13.000 W, jumlah sumbu: 3, This 3-axis Hurco VMX30i vertical machining center was manufactured in 2016. It features a spindle speed range of 10 – 12,000 rpm and a spindle motor power of 13 kW. The machine offers an X-axis travel of 760 mm, a Y-axis travel of 510 mm, and a Z-axis travel of 610 mm, along with a table size of 1020 × 510 mm and a maximum table load of 1,000 kg. If you are looking for high-quality machining capability, the Hurco VMX30i machine we are offering for sale should be considered. Contact us for further details. • Control: WINMAX (MAX 5), dual screen • Table size: 1020 × 510 mm • Tool changer: 30 positions • Construction: New design Additional equipment: • Chip conveyor • Water cooling system • Spindle cooling • Full machine enclosure / chip protection grid • Machine work light Dcedpfx Acoyufcfj Tsi • Machine base • Machine status indicator • DXF option • ULTIMONITOR Ethernet kit • Material and tool library • WINMAX PC software • External spindle blower

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jam operasional: 346 h, jumlah sumbu: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and has rapid traverse rates of 24 m/min in the X axis. If you are looking for high-quality turning and milling capabilities, you should consider the Hurco CNC TMX 8 MYSi turn-mill center. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Maximum turning diameter: 508 mm • Maximum turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Maximum main spindle speed: 4,500 rpm • Maximum sub-spindle speed: 6,000 rpm • Synchron spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar passage: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interrupt capacity: 10,000 A Dcedpfxeym T Ito Ac Toi • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included, swivel holders are not included.

Kondisi: bekas, Tahun pembuatan: 2010, Drehdurchmesser über Bett 0316 mm Drehlänge 340 mm Steuerung ultimax Hurco Drehdurchmesser über Bettschlitten 240 mm Schwingdurchmesser 402,5 mm Spindeldrehzahlen - stufenlos 0- 6000 U/min- rpm Spindelbohrung 45 mm Dcedpfxoydqpie Ac Tsi Vorschübe 0- 30 m/min Betriebsspannung 400 V Anschlußleistung 14 KW Planschlittenweg 185 mm Längsweg 340 mm Raumbedarf ca. 3,76 x 2,92 x 2,15 m Aufnahmedurchmesser VDI 20 mm Hauptantriebsmotor 11,5 kW Maschinengewicht ca. 3,2 t Mit 12- fach Revolver und Stangenlader.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, steering WIMNAX V09 (DSM) Table dimensions: 2184 x 865 mm T-slot in table: 7 x 18 x 125 mm Max. table load: 2268 kg X travel: 2134 mm Y travel: 864 mm Z travel: 762 mm Spindle speed: 12,000 rpm Drive power: 18 kW Spindle taper: SK40 ATC magazine: 40 positions Max. tool diameter: 74.9 mm Max. tool length: 300 mm Max. tool weight: 7 kg Rapid traverse X/Y/Z: 18, 18, 13.5 m/min Weight: 17,000 kg Dimensions (LxWxH): 7570 x 4450 x 3260 mm Accessories & Equipment: - Coolant system - DXF, NCPP, ISNC, Herical, Synchronous high-speed cutting, Pocket/Island options - Internal coolant supply, 20 bar - Spindle cooler - Chip conveyor - Manuals Dcodpopiaqxofx Ac Toi Very good condition. Available for immediate sale. The tools shown are not included in the scope of delivery.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2018, Monoblock Bottling Machine STORK VS 24/8 after a complete overhaul performed by the professional company Z.M. ROBAK. The machine shows virtually no signs of use; the protective foil is still on the housing. The machine is currently set up for filling glass containers – it has been test-run for bottling alcohol. Number of filling valves: 24 pcs (with light vacuum for still beverages) Number of capping heads: 8 pcs (prepared for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Possible bottle formats (after adjusting for specific formats): - Diameter: 45 mm – 110 mm - Height: 105 mm – 400 mm - Standard neck diameter: 28 mm - Optional neck diameter for format change: 18 mm – 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture / overhaul: 2018 – not used in production since overhaul Condition: Machine is virtually unused. Dedpfx Acou Nhiqs Toci The machine comes with original electrical documentation.

Kondisi: sangat baik (bekas), Planer thicknesser CASOLIN TOPStar 530 12/24 Technical data: Max. planing width: 520 mm Max. planing height: 300 mm Cutterhead diameter: 110 mm Number of knives: 4 pieces Feed speed: 5/8/12/19 m/min Electric height adjustment Extraction port: 160 mm Power supply: 400 V Dedpeu T D Hqsfx Ac Toci Motor power: 5.5 kW Overall dimensions: Length: 1060 mm Width: 1050 mm Height: 1280 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, hersteller-hurco-technische-daten Dcedpfx Acoydd Ske Tei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, hersteller-hurco-vmx42i-baujahr2019 Dcedpfx Acsyc Sn Rj Tei

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 19.299 h, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 290 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 55 mm, diameter pembubutan di atas alas geser: 508 mm, Bidding obligates the buyer to collect the machine within the stipulated period, no later than 05/08/2025! No reserve price – guaranteed sale to the highest bidder! CNC Lathe with main and sub-spindle – unrefurbished replacement spindle included! TECHNICAL DETAILS Travel Travel X: 290 mm Travel Z: 560 mm Travel W: 640 mm Travel Y: ±55 mm Main Spindle Main spindle power: 28 kW Main spindle torque: 242 Nm Spindle nose: A2-6 Bar capacity: 64 mm Max. turning diameter: 508 mm Chuck diameter: 203 mm Spindle speed: 4,500 rpm Feeds Feed X: 24 m/min Feed Z: 30 m/min Feed W: 30 m/min Feed Y: 12 m/min Turret Turret: 12 stations Tool holders: VDI40 Max. boring bar diameter: 40 mm Shank cross-section: 25×25 mm Driven Tools Driven tool speed: 4,000 rpm Driven tool power: 5.4 kW Driven tool torque: 24 Nm Indexing time: 0.16 s Sub-Spindle Sub-spindle max. speed: 6,000 rpm Sub-spindle torque: 70 Nm MACHINE DETAILS Electrical connection: 66 kVA / 95 A / 400 V Pneumatic connection: 7 bar / 150 l/min Weight: 7,000 kg Operating Hours Power-on hours: 60,496 h Spindle hours: 19,299 h EQUIPMENT Bar feeder IRCO/Breuning SIMAG 80.1-2R-3000 Various guide channels Dedpjw A Hpdjfx Ac Tsci Chip conveyor Tool setter Transformer Coolant unit Coolant tray Static and driven tool holders Replacement main spindle (unrefurbished) Various collets (size 65) Documentation (wiring diagrams, operator’s manual, etc.) Note: The main spindle emits noise. An unrefurbished replacement spindle is included.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 704-0101-809, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 510 mm, kecepatan rotasi (maks.): 12.000 rpm, jumlah slot dalam magazin alat: 32, sudut putar poros C (maks.): 360 °, TECHNICAL DETAILS Control: ULTIMAX 4 X-Axis: 800 mm Y-Axis: 700 mm Z-Axis: 510 mm Rapid traverse (X/Y/Z): 35 m/min A-Axis: ±30° / 110° Rapid traverse A-Axis: 16.5 m/min C-Axis: 360° Rapid traverse C-Axis: 16.5 m/min Djdpfx Aoxamfkjc Tsci Spindle Speed range: 10 - 12,000 rpm Spindle motor: 18 kW Tooling Tool holder: SK 40 Tool positions: 32 Work Area Max. table load: 300 kg Table size: 610 mm x 5 mm x 5 mm MACHINE DETAILS Machine weight: 12,500 kg Required space (LxWxH): 2.700 m x 4.000 m x 3.250 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, HURCO VMX 50 MI Tahun: 2014 Versi perangkat lunak: 9 UPOC/HEL, NC MERGE, T&M LIB, UMON, AVG, ISNC/NCPP, RTAP, TCOPTI, SFQ, UMOT, DXF, 3D/Swept surface Tahun: 2014 Perjalanan XYZ: 1270 x 660 x 610 mm Ukuran meja: 1500 x 660 mm 24 alat tukar otomatis (ATC) Spindel tipe tirus 40 – CAT 40 10.000 rpm Pendinginan standar Dcodpfx Acsxbglgs Tsi Beberapa tooling disertakan bersama mesin Berat: 9 ton