Beli Itf Wet Blasting bekas (1.478)

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Our high-performance sandblasting cabinet "MM 2010" operates using the pressure blasting process and, thanks to its innovative abrasive recycling system, is suitable for all types of blasting media. Iedpfewc Nrnsx Adhsth The bucket elevator firmly connected to the blasting cabinet allows even the heaviest blasting media, such as stainless steel blasting media, cast steel and other metallic abrasives, to be used without any problems. Unlike competitor systems, the abrasive is not sucked back up, but instead is transported to the adjacent bucket elevator via a flat conveyor system. The bucket elevator lifts the material upward and discharges it into the cyclone separator, where the blasting media is cleaned and reintroduced into the blasting cycle. Our specially developed abrasive recycling system ensures a continuous supply of blasting media regardless of the extraction system’s suction power. Thanks to the abrasive recycling system and innovative fan technology, the blasting cabinet has a very low energy requirement (0.75 kW fan motor). Since the abrasive is not sucked back, there is no need for an oversized extraction system with high power consumption (as found in many competitor systems). To achieve maximum blasting performance, the "MM 2010" pressure blasting cabinet is equipped with a 60 liter capacity pressure vessel. This vessel features a pressure regulator, allowing the blasting pressure to be continuously adjusted from 0.1 to 12 bar. For safe operation, a water separator is permanently mounted on the pressure vessel to protect the abrasive from moisture. The blasting nozzle is made from highly wear-resistant boron carbide and allows operating times of up to 1,000 hours depending on the abrasive used. The blasting chamber is lined with wear-resistant rubber, which increases the service life of the blasting media and protects the blasting cabinet from wear. An air blow gun is installed to clean blasted workpieces and to blow off the cabinet walls. The permanently installed cartridge filter extraction system ensures optimal visibility inside the blasting chamber and maximum service life of the blasting media. The extraction unit features continuous cleaning of the filter cartridges using a compressed air pulse, which ensures high service life for the filter media and consistently stable suction performance. Loading of the blasting chamber is via an angled front flap that swings completely upward, allowing the sandblasting cabinet to be easily loaded by forklift or crane. The robust work grate can support up to 500 kg. To ensure the best visibility inside the blasting chamber, two powerful and energy-efficient LED lights are mounted on the cabinet roof. Their roof-mounted position keeps them protected from dust and wear. The system is operated via a modern touch display. For safe operation, the blasting cabinet is equipped with a door safety switch. The viewing windows are made of toughened safety glass (ESG) and covered with a protective anti-wear film.

Kondisi: baru, Tahun pembuatan: 2025, daya: 5 kW (6,80 hp), SAPI premium pressure blasting unit, 200 liters, with cyclone cleaner and abrasive vacuum system for abrasive recycling. This blasting system offers a cost-effective, highly economical, and efficient solution for open blasting operations with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of various types of workpieces, operated by one blasting operator with integrated abrasive recycling. After blasting, the abrasive media is manually collected and pushed into the floor-mounted collection hopper. The abrasive vacuum draws the media from the hopper, passing it through the cyclone cleaner. In this process, dust is extracted and collected in the vacuum’s dust container; coarse debris is separated via a screen. The cleaned abrasive then returns to the ventilated pressure blast vessel, making it available for reuse. Our SAPI safety shutoff ensures a safe and economically efficient blasting process. Remote control allows the operator to start and stop the blast vessel using a hand lever mounted on the blast hose assembly. This is a highly economical and efficient solution for open-blasting tasks with semi-automatic abrasive recycling. Scope of supply includes: - SAPI Premium blast vessel, 200 liters with 1 1/4" piping, pressure regulated from 0.1 – 12 bar, maximum operating pressure 12 bar Iedpfx Aowc Rcnedhoth - High-performance water separator 1 1/4", permanently mounted to the unit - SAPI safety shutoff - Cyclone cleaner for abrasive recycling with lifting device - Abrasive media sieve (insert sieve for the blast vessel hopper) - Filling hopper 500x500x380 mm - 4 m connection hose from filling hopper to cyclone cleaner - 3 m connection hose from cyclone cleaner to abrasive vacuum - Abrasive vacuum, 5.5 kW, 400 V, 50 Hz, with 70-liter dust container - 10 m blast hose assembly 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling - Boron carbide Venturi long nozzle (optionally 6 mm, 8 mm, or 10 mm diameter)

Kondisi: siap digunakan (bekas), 1 Itodpfxeyr Dlaj Adhoh

Kondisi: bekas, Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 4.000 mm, panjang total: 7.100 mm, lebar total: 8.100 mm, suhu: 80 °C, kapasitas pemanasan: 116 kW (157,72 hp), Perlengkapan: kabin, 01 Itodpfx Aox H Rhrodheh

Tahun pembuatan: 2005, Kondisi: siap digunakan (bekas), Zwei Glassandstrahlanlagen des Fa. S.A.G. stehen zur Verfügung. 1) S.A.G. T4, Baujahr: 2005, Anordnung: vertikal, max. Strahlbreite: 3000mm, max. Strahlhöhe: 2250mm, max. Glashöhe: 2400mm, Glasstärkenbereich: 3mm-40mm, Strahlleistung: ca. 15m²/h, Maschinendimensionen X/Y/Z: ca. 3800mm/3300mm/1900mm, Gewicht: ca. 1550kg. 2) S.A.G. T3, Baujahr: 2002, Strahlbreite: 2800mm, Strahlhöhe: 1200mm, Glasstärkenbereich: 3mm-40mm, Maschinendimensionen X/Y/Z: ca. 4100mm/2300mm/1900mm, Gewicht: ca. 1350kg. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich. Itedpfx Aeyrtamedheh

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, Our SAPI Blast Rooms SAPI blast rooms and systems—backed by 50 years of tradition and proven quality—are designed for industrial and commercial applications, providing a safe environment for all types of blasting operations. Each hall includes a blast chamber, an abrasive recovery system with filter and de-dusting unit, lighting, and comprehensive safety features to ensure operator protection. Abrasive Recovery System Our recovery system collects, separates, and recycles blasting media, reducing both costs and environmental impact. Ventilation and filtration systems keep air inside the hall clean, while powerful lighting offers optimal visibility for operators. Key components of our SAPI blast rooms: ✅ Blast Chamber: The central zone where blasting operations are performed. 🌬️ Ventilation and Filtration Systems: Reduce dust load and ensure optimal visibility. Itedpoun R N Aofx Adheh 🔄 SAPI Recovery System: Recycles abrasive media, minimising costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency stop functions, fire protection, and operator gear such as helmets, overalls, and gloves. ⚙️ Control Cabinet: Central control unit for all electrical components. 🗑️ Dust Collection Bin: Collects fine media for easy disposal. 🛠️ Compressor: High-performance compressor for air supply. 💪 Mammut Blasting Unit: Engineered for demanding industrial applications. Reasons to choose our blast rooms: ✅ High Efficiency: Increased productivity and reduced operating costs. 🛡️ Safe, Clean Environment: Minimised environmental impact and maximised work safety. ⚙️ Customisable Solutions: Tailored solutions for optimum performance. 🔧 Premium Components: Durable parts meaning less maintenance required. 🛠️ Support & Service: Expert assistance for rapid trouble-shooting. 🌱 Environmental Responsibility: Lower waste and reduced ecological footprint. The SAPI Flat Conveyor System: Abrasive media are processed via our high-efficiency abrasive cleaner, which separates out contaminants. This system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit, requiring minimal foundation work for installation on existing hall floors. Advantages of our flat conveyor system: ✅ Shallow installation depth, retrofittable in existing blast rooms 🔇 Low noise and friction operation ⚡ Extremely low energy consumption 🏗️ Significantly reduced wear, as only rubber is used 🚧 Very low installation height

Tahun pembuatan: 2012, Kondisi: bekas, Technical data: Table support surface: Width x Depth x Max. clamping stroke: 192 x 115 x 120 mm Height from center of cutting disc above table: 520 mm Cutting disc height adjustment via cylinder with measurement system: 445 mm Itodpjvu U Hpefx Adhsh Cutting disc dimensions: Min.: 350 x 2.8 x 32 mm Max.: 400 x 4.0 x 32 mm Workpiece dimensions max. length: Workpiece feed: 3500 mm Workpiece discharge: 2000 mm Workpiece dimensions min. length: Workpiece feed: 300 mm Workpiece discharge: 300 mm Workpiece feed: Servo-controlled Measurement travel via measurement system: 3500 mm Peripheral speed: 25 - 60 m/sec Main motor: 10 kW Cutting unit dimensions (W x D x H), approx.: 850 x 1600 x 2815 mm Weight: Machine: 980 kg Workpiece feed: 380 kg Workpiece discharge: 350 kg Control cabinet: 280 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Wet waste compactor press container Bergmann MPB405 SN/10 suitable for skip loaders 10 m³ usable volume inspected, serviced, fully functional Painting in desired RAL color possible Isdjvmwpwopfx Adhoth We will be happy to provide a quotation including delivery.

Kondisi: baru, Tahun pembuatan: 2026, Kabinet sandblasting tekanan untuk penyemprotan bagian dalam pipa dengan meja putar dan mode operasi manual Itsdpfxsyn Inws Adhjh - Sistem filter - Meja putar dengan prisma sebagai penyangga pipa - Lanse bagian dalam pipa digerakkan - Penyimpanan program, jarak tempuh, kecepatan pengumpanan, fungsi hembus - Nozzle sandblasting luar dengan osilasi (opsional)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar total: 1.112 mm, tinggi total: 2.391 mm, panjang total: 1.237 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 750 kg, berat benda kerja (maks.): 30 kg, tegangan masuk: 400 V, lebar yang dibutuhkan: 2.700 mm, persyaratan ruang panjang: 2.000 mm, daya: 3 kW (4,08 hp), Perlengkapan: dokumentasi / manual, kabin, pencahayaan, We are selling our nearly-new BMF TWISTER blasting system (demonstration unit), year of manufacture 2025. The unit is fully automatic and operates without compressed air. The workpieces are rotated in a media cloud, ensuring all-around blasting coverage. Desired parameters, such as blasting time or the rotational speed of the throwing wheel, are easily set using the touch panel. Settings can be saved as recipes for later use. No skilled personnel required. The quick-change system allows up to 100 workpieces per blasting cycle. A wide range of commercially available blasting media can be used, such as stainless steel, glass, or ceramic. A matching extraction system is included. Inspection and test blasting with your workpieces are possible at our site. Mains voltage: 3~400 V Frequency: 50 Hz Connected load: 5.0 kVA Itjdpfxsym T Uge Adheh Power output: 3 kW Maximum rotational speed: 10,000 rpm Weight: 750 kg Year of manufacture: 2025 If you have any questions or require further information, please feel free to contact us by message or phone.

Kondisi: sangat baik (bekas), Shot blasting machine, continuous blast machine, wear plates, blast wheel discs -Spare and wear parts: for shot blasting machine, continuous blast machine -Impact plates: 02122 V105, 7 pcs, dimensions 390/125/H145 mm, 11.7 kg/pc -Impact plates: C1315 N517, 2 pcs, dimensions 480/140/H175 mm, 15 kg/pc -Blast wheel discs: 02122 V105, 16 pcs, dimensions 350 x 80 mm, total weight 112.5 kg Ijdpfx Aewaiv Uodhjth -Accelerator gearboxes: 4 pcs, Ø 250 x 320 mm, 27 kg/pc -Conveyor shafts: 3 pcs, Ø 80 x 1640 mm, 40 kg/pc -Sale/Price: complete -Total weight: 452.4 kg

Kondisi: baik (bekas), Tahun pembuatan: 2007, Conveyor belt, belt conveyor, transport belt, belt conveyor system, belt conveyor Iedpokahkrjfx Adhoth - Manufacturer: SFB, belt conveyor type ITF /NP, 2-track design on a solid stainless steel frame - Speed: 52.8 m/min - Operating voltage: 267 V - Drive: 3/2.6 Nm, see nameplate photo - Belt width: each 70 mm - Conveyor length: 530 mm / 820 mm - Conveyor width: 220 mm - Installation dimensions: 1360/370/H700 mm - Weight: 56 kg

Kondisi: bekas, Tahun pembuatan: 2005, Sandblasting system, blasting unit, sandblasting cabinet, sandblasting device - Manufacturer: Güde, blasting unit sandblasting cabinet type P1 Isdpfx Adjryak Tshsth - Internal dimensions: 580/480/H295/350 mm - Air consumption: 150 l/min / Pressure 6 bar - Dimensions: 690/480/H490 mm - Total weight: 38 kg

Kondisi: baik (bekas), Wet grinding wheel, pedestal grinder, bench grinder - Wet and dry grinder Iodpfx Adjcmh H Ushjth - Grinding wheels: 220 x 40 mm - Motor: 0.55 kW - Speed: 600 rpm - Dimensions: 650/300/H1200 mm - Weight: 80 kg

Tahun pembuatan: 1981, Kondisi: baik (bekas), Wet mixer, batch mixer, liquid mixer, chemical mixer, drum mixer Isdpsvmq Iyofx Adheth -Manufacturer: KWH VEB, wet mixer with ceramic drum -Type: 2841.5.7521 -Drum capacity: 100 litres -Drum speed: 38 rpm -Motor: 1.1 kW -Overall dimensions: 1520/670/H930 mm -Weight: 487 kg

Kondisi: baik (bekas), de_001 Isdpjqcyzwsfx Adhsth

Kondisi: baru, Sandblasting Cabinet Bernardo SB 4 Working Area Dimensions: 1110 x 820 x 810 mm Air Consumption: 680 l/min Itsdpfx Adsd Tb Uzeheh Required Air Pressure: 8.6 bar Hopper Capacity: 148 litres Armhole Opening: 180 mm Air Connection: 3/8" Weight approx. 160 kg

Kondisi: baru, Tahun pembuatan: 2026, 1 Iodpfx Adjynr E Tjhjth

Kondisi: baru, Tahun pembuatan: 2026, druckstrahlkessel-100l-baustelle Ijdpfxsynr Emj Adhjth

Kondisi: hampir baru (bekas), DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation (as new!!) Dyemansion Powershot C Blasting Cabinet Gentle surface cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0 Year of manufacture: 2021 The industrial standard for simple and efficient depowdering Automated depowdering increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time required for part cleaning and the personnel needed in your production can be significantly reduced. This increases your efficiency. By investing in automated depowdering with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware features The blast cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Various blasting nozzles and ionization ensure reproducible results. A basket with a soft, exchangeable lining protects the parts from damage during processing. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the contained parts. This configuration guarantees efficient powder removal. High operating comfort with improved ergonomics and process control Experience a new level of process management with touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. Thanks to user-centered design, everything is easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical Data: POWERSHOT C AUTOMATION Individual programming, control, and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200, or almost 1.5x full Stratasys H350 build volume Effective basket volume 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended operating space (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: Output 1kW Requirements: 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Itedpfx Adjtq E N Eshoh Consumption Minimum: 1.4 m³/min at 2.2 bar Maximum: 1.8 m³/min at 5 bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, specifications may vary!) For further questions, please feel free to contact us by phone.

Tahun pembuatan: 2025, Kondisi: baru, Drum Shot Blasting Machine; Consists of a Cabin, Turbine System, Recycling System, Filtration System, Control Panel, Platform, Hydraulic Loading-Unloading Unit, and Vibrating Sieve. Blasting is performed as the rubber belt, wound around three drums, rotates the virtual barrel-shaped chamber, while the turbine throws steel shots onto the parts. The blasting cabin is manufactured from ST-37 steel plate. Areas directly targeted by the turbines at the hot point are reinforced with wear-resistant manganese steel plate, while other areas are reinforced with Hardox plate. (Full manganese steel plate lining is optional) Itedpfx Aovliucsdhoh The wear-resistant plating is designed with bolts for future replacement of parts due to wear, allowing easy changeover by your authorized personnel. The wear-resistant plating is designed with bolts for future replacement of parts due to wear, allowing easy changeover by your authorized personnel. Dimensions of the TK-6 PREMIUM machine: Drum Diameter Ø: 1000 mm x Length Between Discs L: 1200 mm and 800 kg loading capacity. Turbine dimensions: 2 x F300 type Ø 320 mm with 7.5 KW motor. Equipped with a Rubber Belt Conveyor.

Tahun pembuatan: 2025, Kondisi: baru, ASK - 0 Hanger Type Shot Blasting Machine; Used for polishing sheet and metal parts after press and heat treatment, cleaning and roughening of castings, pre-paint and rubber coating preparation, transferring forged parts to canvases, and refurbishment of old components. (Quantity x Diameter): Ø: 800 H: 700 - equipped with 2 turbines, each Ø 325mm, with 6 blades. The blast chamber is constructed from ST-37 steel sheet, with critical exposure areas reinforced using Brinell or manganese wear plates. The interior of the blast chamber is lined with rubber sheets to protect against abrasion during the shot blasting process. Rubber linings are secured to the chamber using mounting strips. (Optional full manganese armor plating is available upon customer request.) Wear plate cladding features a bolted design, facilitating quick and easy replacement by your company’s authorized personnel in case of future wear. The chamber door can be operated pneumatically or manually, based on preference. It features a twin-wing design (two leaves). A locking mechanism is fitted to the chamber door to prevent accidental opening during the blasting process. Additionally, a sensor or switch is integrated to immediately halt the blasting operation if the chamber door is open. A rail system, suspension gear assembly, and optional crane are incorporated to ensure easy handling and movement of workpieces within the blast chamber. Itedpfxovkf Age Adhoh A full automation panel is included. Panel components are Siemens/Schneider branded. Machine operation is governed via a 10” PLC touchscreen display.

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 1.000 h, de Iodpjxpiw Ujfx Adhsth

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, berat keseluruhan: 68 kg, tekanan: 10 batang, tegangan masuk: 230 V, panjang paket selang: 5.000 mm, CRYONOMIC COB62+ suchy lodowy oczyszczacz strumieniowy. Maszyna demonstracyjna używana przez dystrybutora w Polsce podczas prezentacji, stan jak nowy. Używana ok. 20 h podczas pokazów. W komplecie: maszyna, wąż 5 m, pistolet z dyszą standardową. Maksymalne ciśnienie robocze: 10 barów. Zużycie powietrza: 0,5 – 5,5 m³/min. Zużycie suchego lodu: 20 – 80 kg/h. Możliwość zastosowania dodatkowego modułu ściernego do bardziej agresywnego czyszczenia z użyciem ścierniwa. Możliwość zamontowania oświetlenia LED w pistolecie. Itjdpfx Asq Rvakjdheh Prosta i niezawodna obsługa oraz konstrukcja, wsparta ponad 30-letnim doświadczeniem w produkcji urządzeń do czyszczenia suchym lodem. Wyprodukowano w Belgii.

Tahun pembuatan: 2003, Kondisi: bekas, prod-zanchetta-pirana Isdpfsx R Dk Isx Adhjth