Beli Karl Klink Internal Mesin Broaching bekas (82.928)

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of Manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Machine No.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition with manual, heavy-duty tool feeder Broaching stroke: 1,500 mm Pulling force: 10,000 kg (100 kN) Mount in pull bridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Workpiece diameter: max. approx. 750 mm (limited by the tool tray of the feeder) Cutting speed: Hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: Hydraulically infinitely variable from 5 m/min to 30 m/min Machine footprint (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Equipment: • Mechanical-hydraulic control for broaching and return stroke • Integrated coolant and cutting fluid system • Manually operated tool feed • Broaching slide with pull head mount is guided flat on both sides • Adjustable pull force limitation Accessories: • 1 universal pull head for flat shanks from 3 mm up to max. 25 mm width • Adapter sleeve for pull bridge from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for the production of keyways with flat broaching tools, as well as for profile broaching. Thanks to the machine bed and robust tool feeder, the machine is well suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is located in our warehouse and can be inspected under power. Currently, the machine has not been technically or visually refurbished, but is ready for immediate use. Klodpfx Asr A Hdgehhst Pull heads for profile broaching are mostly available upon request, depending on DIN standard, dimension, and stock. Direct contact details for us as well as further information can be found in the attached PDF document.

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 (overhauled) Weight: 2 t Klsdpfoixntwjx Ahhst Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile force: 10,000 kg at 3 m/min Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 30 m/min Maximum stroke: 1,200 mm Broaching tool clamping: universal pulling head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table opening: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2023, tegangan masuk: 400 V, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580kg Overhauled: 3/2023 by Wiemers AG General / technical data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4 with current "CE" marking Pulling force: 40 kN (4,000kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / working area: 540 x 340mm / 450 x 250mm Table opening: Ø 90mm for standard broaching mandrels Kodpfx Aow H Dgnjhhjlt Workpiece diameter: unlimited Dimensions (h x w x d): 2,350mm x 900mm x 1,000mm (with splash-guard enclosure) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / special equipment: - Dual-speed drive - Safety door with interlock and chip chute - Chip chute with integrated tool tray - Electric clamping jaw sensing (tool removal control to prevent unintentional return of the carriage) - Integrated coolant system with solenoid valve (operated via pivot system) - Patented coolant/lubricant pivot system - Externally adjustable tool length setting system (reproducible across machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broach tools (keyway tools) - Three-sided closed splash guard enclosure with tool tray (ideal for profile broaching) - External control panel (connected via Harting connector) Note: The machine has been completely overhauled, and the machine body fully refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, check valve, and drain cock) including the coolant/lubricant pivot system is new - Coolant supply is controlled by a solenoid valve, which can be operated via the pivot system - The carriage as well as clamping jaws and gear segments are new - A switchable clamping jaw monitoring system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal indicator, and door locking mechanism - The tool length setting system has been relocated outside the machine enclosure - Additional limit switches have been installed - The complete electrical system (control cabinet) is new - No PLC is installed; the machine is electrically maintenance-friendly - New drive motor (by SEW Germany) with brake - The machine has been newly painted with 2-component structural paint General: The double spindle drive ensures smooth and central pulling as well as a constant broaching speed (broaching speed selectable at 3 m/min or 6 m/min). Due to its design, the machine is quick and easy to set up for broaching with flat broach tools for keyway machining. Thanks to the universally designed carriage and machine table, both profile and flat broaching can be performed without the need for additional pull heads.

Tahun pembuatan: 2024, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: WAG 3102, en Kljdov Rpnmopfx Ahhot

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 60305, en-001 Klodpfsiqkb Rex Ahhst

Kondisi: bekas, Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 17065, manufacturer: Henning model: U6/1000 machine no.: 17065 year of manufacture: 1979 gross weight: 1,100 kg general / technical data: used mechanical vertical broaching machine Henning, in operational condition drawing force: 6,000 kg (60 kN) broaching speeds: 3 m/min and 6 m/min return speed: 6 m/min maximum stroke: 1,000 mm maximum tool length: 1,200 mm table size / working area: 600 x 460 mm / 480 x 340 mm table opening: Ø 170 mm with eccentric table insert featuring Ø 90 mm borehole for standard broaching mandrels (Rausch system) workpiece diameter: unlimited dimensions (h x w x d): 1,650 mm x 1,200 mm x 700 mm (height = table height to floor, excluding superstructures) motor: 7.4 / 10 kW power supply: 380 Volt / 50 Hz Klsdpfxsup Uzfs Ahhet accessories / special equipment: - integrated coolant system - return stroke control with dual activation mode - machine documentation - automatic jaw opener at lower pull bridge position (for tool removal) - tool clamping with universal jaws for flat shanks DIN 1416 BL 6 remarks: The machine is in its original condition and functionality has been tested. The machine is mechanically driven via trapezoidal thread spindle and geared motor. Unlike most mechanically driven broaching machines, in which the trapezoidal spindle forms both the drive and guide element, this machine features additional guide columns. As a result, the machine is additionally column-guided and very robustly constructed. The double spindle drive is ideal for maintaining a constant cutting speed even at higher drawing forces. The machine is in stock at our warehouse and can be inspected under power.

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, panjang broaching: 1.000 mm, jumlah posisi broaching: 1, kecepatan broaching: 3 m/menit, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680kg Overhaul: 11/2024 by Wiemers AG General / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Tensile force: 60 kN Kodpfjw Ighijx Ahholt Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / working surface: 610 x 470 mm / 520 x 320 mm Table bore: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (h x w x d): 2,250 mm x 850 mm x 1,200 mm (h = table height to floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional changes/optimisations made to the original machine: - External stroke adjustment - New cross-machine, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety guard door with monitoring (integrated in the emergency stop circuit) - Machine enclosure below the guard door, with chip guard and tool storage area - Electrical probe for clamping jaws (tool removal check to prevent unintentional retraction of the pull bridge) - Coolant swivel system with switching solenoid valve during the swivel process (enables coolant to be switched on before broaching stroke is initiated » visual check of lubricant flow—no dry cut!) - Routing of electrical cables in steel protective conduits - Heavy-duty control cabinet bracket for machine components - Additional oil-tight tray mounted on the control cabinet - Three-sided splash guard cabin (w = 960 x d = 450 x h = 590 mm) - Reinforced chip screen with magnetic separator - Operating panel made of stainless steel sheet with durable labeling - Four central lubrication points for the trapezoidal spindle drive Remarks: The machine has been completely overhauled; the machine body is fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made of cast wear-resistant bronze - All bearings and seals replaced - The coolant system (pump, solenoid valve, drain valve), including the coolant/lubricant swivel system, is new - The clamping jaws are new - The complete electrical system (control cabinet) is new - All covers and enclosures are new - The following components have been overhauled and reused: -- Machine base -- Machine stand -- Machine table with table insert -- Pull bridge (clamping jaws are new) -- Gear wheels -- Electric motor (new brake, new bearings) The machine is in stock at our warehouse and can be inspected under power. The images attached are original photos of the machine. The machine is CE certified. The CE certificate corresponds to the 1998 standard (first overhaul).

Tahun pembuatan: 1983, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General Information / Technical Data: Kledpfod Nb A Nsx Ahhjt Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition - Pulling force: 16,000 kg - Broaching length: 1,250 mm - Broaching stations: 3 units - Distance between broaching stations: 125 mm - Clamping diameter for draw heads: 3 x Ø 80 mm - Pass-through width between cylinders: max. 435 mm - Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min - Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min - Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit base) - Power supply / rated connected load: 380 Volt, 50 Hz / 22 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-operated draw heads according to DIN 1417/18 for locking broaching tools in the draw bridge. The needle extractor heads in the tool feeder are hydraulically locked. The machine includes a coolant system with integrated magnetic band chip conveyor for installation in a pit. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in serial production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle extractors are available upon request. The machine can be inspected at our warehouse.

Tahun pembuatan: 1990, Kondisi: sangat baik (bekas), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical specifications: Vertical internal broaching machine in very good technical condition Pulling force: 16,000 kg Broaching speed: up to 27.5 m/min, steplessly adjustable Klodpfx Ahjlpadyshot Return speed: up to 34 m/min, steplessly adjustable Maximum stroke: 1,250 mm Broaching stations: 4 units Equipment: - Automatic tool changer - Automatic workpiece feed (workpiece-specific) - Hydraulic tool clamping device (workpiece-specific) Remarks: High-performance production broaching machine for large-scale series production with high cutting speed!

Tahun pembuatan: 1963, Kondisi: bekas, nomor mesin/kendaraan: 18135, Horizontal broaching machine Manufacturer: Forst Kjdpobrcy Nsfx Ahholt Model: RIW 100/2200 Tensile force: 100 tons Stroke: 2,200 mm Crane available separately under listing Y941

Tahun pembuatan: 1992, Kondisi: bekas, nomor mesin/kendaraan: 148, en: Manufacturer: Forst Type: RISZ 6.3 x 1000 x 320 Machine No.: 148 Year of manufacture: 1992 Klodpfx Ahjdnk T Aehet Max. tensile force: 80 kN Max. stroke: 1,000 mm Weight: approx. 10 tonnes (machine + control cabinet + hydraulic unit)

Tahun pembuatan: 1995, Kondisi: bekas, nomor mesin/kendaraan: 20225, Color: green Ksdpfx Ahebrcmfeholt Lightly used! DIN 1415 Electromechanical drive

Kondisi: bekas, Tahun pembuatan: 1971, kedalaman penggilingan: 150 mm, diameter penggilingan: 80 mm, diameter dalam: 80 mm, Produsen: OVERBECK Model: 250 I Tahun pembuatan: 1971 Diameter penjepitan benda kerja maks: 140 mm Panjang penjepitan maks: 150 mm Panjang lubang yang dapat digerinda: 150 mm Klodpfx Aheu Ef Dqjhot Diameter lubang maks: 80 mm Perlengkapan gerinda datar dapat diputar secara manual Tangki pendingin dengan pompa Tanpa spindel gerinda dan motor penggerak Terakhir digunakan dengan spindle pneumatik Berat: sekitar 1400 kg

Tahun pembuatan: 1969, Kondisi: bekas, nomor mesin/kendaraan: 6.223.0085, Tractive force: 10 tons Lift: 1250 mm Klsdpfx Ahebrcl Ijhst 3 clearing positions Base area: approx. 140 x 120 cm

Tahun pembuatan: 2001, Kondisi: bekas, nomor mesin/kendaraan: 29, Machine number: 29 Kledednk Ukspfx Ahhet Year of manufacture: 2001 Max. pulling force: 63 kN Max. stroke: 1000 mm Weight: approx. 7 tons (machine + control cabinet + coolant system) Broaching stations: 1 Cycle time: 28 sec. Cutting speed: 8 m/min Return stroke: 16 m/min Shank diameter: 32 mm End piece diameter: 25 mm Dimensions of the basic machine (L x W x H): 4800 x 2800 x 3500 mm

Tahun pembuatan: 1978, Kondisi: baik (bekas), nomor mesin/kendaraan: 6006/478, Broaching Machine - Vertical Manufacturer: Rausch Model: RS8/1300 Year of manufacture: 1978 Pulling force: 8 tons Kedpofc T E Aofx Ahhjlt Stroke: 1,300 mm Weight: 0.92 tons

Tahun pembuatan: 1960, Kondisi: baik (bekas), nomor mesin/kendaraan: 758, Overhauled Kodpfebrcmhox Ahhslt Towing capacity: 2 t Lift: 1000 mm

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 20236, Tractive force: 10 t Lift: 1500 mm 1 broaching station Weight: approx. 1800 kg Ksdpfxsbrcmro Ahhelt Power: 9.5 kW/380V With feeder and mechanical chip conveyor

Tahun pembuatan: 1992, Kondisi: baik (bekas), nomor mesin/kendaraan: 662681751, Manufacturer: Rausch Type: RS6 / 1300 Machine No.: 662681751 Klsdpfefc T Edex Ahhet Year of manufacture: 1992 Power supply: 3-phase ~ 380 Volt / 50 Hz Connected load: 7.1 kW Rated current: 17 Amps Weight: 810 kg Wiring diagram number: RS6 – 39 With unit Table dimensions: 520mm x 320mm

Tahun pembuatan: 1962, Kondisi: baik (bekas), nomor mesin/kendaraan: 1083, Broaching machine - Vertical Manufacturer: Rausch Model: RS10/915 Machine number: 1083 Year of manufacture: 1962 Pulling force: 10 tons Stroke: 915 mm System: DIN 1415 With platform for above-floor installation Kjdpfsfc T Euex Ahhjlt

Tahun pembuatan: 1991, Kondisi: baik (bekas), nomor mesin/kendaraan: nn, Broaching machine – Vertical Manufacturer: Locher Model: RWIL 10 x 1250 Kedpfefc T Ewsx Ahhelt Year of manufacture: 1991 Tensile force: 10 tons Stroke: 1,250 mm Footprint: approx. 170 x 150 cm With automatic feed Magnetic chip conveyor

Tahun pembuatan: 1971, Kondisi: bekas, nomor mesin/kendaraan: 51, Color: yellow Pulling force: 6.3 t Klsdpfx Aobrclzjhhot Lift: 1000 mm Weight: 3,300 kg

Tahun pembuatan: 1984, Kondisi: bekas, nomor mesin/kendaraan: 16700, Color: white With magnetic strip conveying, automatic feed, Tensile force: 10 t Stroke: 1200 mm Weight: 6 t Footprint: approx. 160 x 140 cm Kledpfobrclqex Ahhjt

Tahun pembuatan: 1981, Kondisi: bekas, nomor mesin/kendaraan: 142, Aumat M320 14873 operating hours: 204/52 Operating voltage: 380 Volt / 50 Hz Control voltage: 220 Volt / 50 Hz Signaling voltage: 24 Volt Power output: 15 kW / Current: 40 A Wiring diagram: No. 142.006.3 Back pressure, broaching slide: 20 – 30 bar Guideway slide: 40 – 45 bar Broaching pressure: 13 – 90 bar Back pressure, guideway slide: 20 – 25 bar Vickers power unit Order number: 626376 Circuit diagram number: 1420032 With chip conveyor Klsdpfx Aoc Swchehhjt Broaching stations: 3 With accessories

Tahun pembuatan: 1991, Kondisi: siap digunakan (bekas), Y 018 broaching machine – vertical Manufacturer: Hönnema Model: HSR 9/1250 RST Kodpfxohf A I Ns Ahholt Machine number: 166/HM 510275 Year of manufacture: 1991 Pulling force: 9 tons Stroke: 1,250 mm Footprint: approx. 230 x 120 cm With automatic feed External broaching with device possible