Beli Meluruskan Dan Panas Perpisahan Mesin bekas (79.913)

Kondisi: baik (bekas), Mesin Pengemas Kantong Semi Otomatis dengan Pemanas Konstan Garis segel panas 300mm Kontrol pedal kaki Kontrol suhu yang dapat disesuaikan untuk berbagai ketebalan kantong Rentang suhu 30 hingga 200°C 220 / 240 volt, 50 / 60 Hz Dengan pemuat kantong yang dapat disesuaikan untuk berbagai tinggi kantong Iedpfxsutg Daj Apaetk Dalam kondisi sangat baik Harga: €495

Kondisi: bekas, Technical details: Pressure: 2.5 t Outreach: 155 mm Maximum ram stroke: 280 mm Distance table/ram: 450 mm Clamping plate on table: 260 x 1000 mm Ram approach speed: 0.08 m/s Ram return speed: 0.32 m/s Ram bore: Ø 20 x 45 mm Height above floor: 930 mm Total power requirement: 1.1 kW Machine weight approx.: 500 kg Machine dimensions approx. LxWxH: 0.85 x 1.0 x 1.7 m Ijdpeu Nfv Uefx Apastk The machine is equipped for straightening work.

Kondisi: bekas, Tahun pembuatan: 1994, Clamping force: 600 kN Clamping plate: 460 x 460 mm Distance between tie bars: 300 x 300 mm Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Itjdpfjtuxmyjx Apask Ejector stroke: 70 mm Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 55 kN Injection stroke: 130 mm Injection plunger diameter: 45, 50, 55 mm Injection volume (DIN 24480): 76, 121, 165 cm³ Specific injection pressure: 345, 280, 231 kp/cm² Associated parting surface: 174, 214, 260 cm² Demolding stroke: 150 mm Used machine DAW 50 as a basis for complete refurbishment, without control cabinet, furnace, or furnace housing. A general overhaul can be carried out at the manufacturer’s overhaul facility. The scope of the overhaul can be defined as required.

Kondisi: bekas, Tahun pembuatan: 1995, Clamping force 2200 kN Clamping plate 755 x 755 mm Tie bar spacing 500 x 500 mm Machine weight approx. 8 t Clamping stroke 430 mm Ejector force 110 kN Ejector stroke 100 mm Iodpfx Apevxlufjajtk Mould height 250–600 mm Tie bar diameter 85 mm Injection force 130 kN Injection stroke 175 mm Injection plunger diameter 70, 80, 90 mm Injection volume (DIN 24480) 450, 636, 856 cm³ Specific injection pressure 335, 260, 203 kp/cm² Corresponding parting surface 656, 846, 1078 cm² Decompression stroke 230 mm Used die casting machine DAW 200 S with Datavario control system for use with zinc alloys. Available upon agreement Recommendation from the manufacturer: a general overhaul at an authorized overhaul facility is advised. The scope of refurbishment can be agreed upon as required.

Kondisi: bekas, Tahun pembuatan: 1999, Clamping force: 3150 kN Clamping plate: 900x900 mm Tie bar distance: 550x550 mm Machine weight approx. 15.5 t Clamping stroke: 500 mm Ejector force: 159 kN Ejector stroke: 120 mm Mould height: 300-700 mm Tie bar diameter: 110 mm Iodpfx Apjvfhrtjastk Injection force: 158 kN Injection stroke: 250 mm Injection piston diameter: 70, 80, 90, 100 mm Injection volume (DIN 24480): 514, 791, 1105, 1455 cm³ Specific injection pressure: 410, 316, 249, 201 kp/cm² Corresponding parting surface: 768, 996, 1265, 1597 cm² Release stroke: 300 mm Used die casting machine DAM 315 S with Datacontrol control system for processing magnesium alloys. Available from used machinery stock. The machine is equipped with an electric furnace from Rauch, type MMO 315E. No spraying device included. Manufacturer recommends repair/overhaul at the reconditioning plant; scope of work can be determined by mutual agreement.

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Manufacturer: Various (European Union) Year of Manufacture: 2000 Tube diameter: 40 – 150 mm Wall thickness: 1 – 4 (5) mm Reference material (tensile strength): 1,000 N/mm² Tube length, input: 4 – 10 m Tube length, output: 4 – 8 m Bundle weight: max. 3,000 kg Itodpomqkt Tjfx Apaok Bundle diameter: max. 600 mm Working direction: left → right Line configuration: • Tube bundle loading station I with singling MAIR • Tube straightening machine (10 rolls) BRONX Type 10Cr.6-BWS • Tube bundle loading station II with singling MAIR • Wet separator HANDTE • Tube bundle loading station III with singling MAIR • Tube inspection line, eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • Multi-head saw line MAIR Type MC150/7/10 • Tube end processing unit MAIR • Brushing machine MAIR • Unloading/loading MAIR • Tube bundle loading station MAIR • Tube bundling system MAIR/ORGAPACK • Emulsion processing unit SCHOENAUER • Siemens S7 control system • Hydraulics

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Manufacturer: various (European Union) Year of manufacture: 2000 Tube diameter: 40 – 150 mm Wall thickness: 1 – 4 (5) mm Reference material (tensile strength): 1,000 N/mm² Tube length - feed: 4 – 10 m Tube length - discharge: 4 – 8 m Coil weight: max. 3,000 kg Coil diameter: max. 600 mm Working direction: left → right Isdomqkubopfx Apaetk Line configuration: • Tube bundle loading station I with separation unit MAIR • Tube straightening machine (10 rolls) BRONX Type 10Cr.6-BWS • Tube bundle loading station II with separation unit MAIR • Wet separator HANDTE • Tube bundle loading station III with separation unit MAIR • Tube inspection line (eddy current/ultrasound) ATM/KRAUTKRÄMER/FÖRSTER • Multi-head sawing plant MAIR Type MC150/7/10 • Tube end finishing machine MAIR • Brushing machine MAIR • Discharge/Loading unit MAIR • Tube bundle loading station MAIR • Tube bundling unit MAIR/ORGAPACK • Emulsion preparation unit SCHOENAUER • Siemens S7 control system • Hydraulic system

Tahun pembuatan: 2000, Kondisi: sangat baik (bekas), Manufacturer: Various (European Union) Year of manufacture: 2000 Tube diameter: 40 – 150 mm Wall thickness: 1 – 4 (5) mm Reference material (tensile strength): 1,000 N/mm² Tube length at loading: 4 – 10 m Tube length at discharge: 4 – 8 m Bundle weight: max. 3,000 kg Bundle diameter: max. 600 mm Working direction: left → right Line composition: • Tube bundle loading station I with separation unit MAIR • Tube straightening machine (10 rolls) BRONX Type 10Cr.6-BWS • Tube bundle loading station II with separation unit MAIR • Wet separator HANDTE • Tube bundle loading station III with separation unit MAIR • Tube testing line eddy current/ultrasonic ATM/KRAUTKRÄMER/FÖRSTER • Multi-head sawing unit MAIR Type MC150/7/10 • Tube end finishing unit MAIR Iodpfxjmqkuuj Apaetk • Brushing machine MAIR • Discharge/loading MAIR • Tube bundle loading station MAIR • Tube bundling unit MAIR/ORGAPACK • Emulsion processing unit SCHOENAUER • Control Siemens S7 • Hydraulic system

Kondisi: baik (bekas), Tahun pembuatan: 1978, Pitch circle diameter max. 152 mm Number of teeth: 8-50 pcs. Iodpfxjxq Hgco Apaotk Weight: 7,500 kg Technical Data – Min./max. root cone angle: 15° / 55° – Pitch circle Ø: 152 mm – Max. tooth height with 21° finishing cutter head: 10.7 mm – Max. tooth width at root with 21°: 28 mm – Cutter head Ø: 200 mm – Number of teeth range: 8–50 – Max. cutter head Ø: .21" Workpiece spindle – Diameter of tapered bore at wide end: 99.219 mm – Clamping length over 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of entire spindle bore: 22.225 mm The GLEASON 726 REVACYCLE bevel gear cutting machine machines workpieces with the highest precision and accuracy. The root angle can range from 15° to 55°, and the bevel gear is machined at a high speed of 49.7 m/min. The GLEASON NO 726 machine weighs approx. 9 tons. Technical specifications of the bevel gear cutting machine GLEASON 726 REVACYCLE - Maximum tooth height: 14.8 mm - Maximum tooth width at root: 28 mm - Maximum root angle: 55° - Minimum root angle: 15° - Cutting head speed: 32.6–49.7 m/min - Feed rates (seconds per tooth): 2–3.1 - Indexing range: 8–50 mm - Diameter of tapered bore at larger end: 99 mm - Taper per foot: 15.4 mm - Taper depth: 15.8 mm - Counterbore behind taper: 57.2 x 77.9 mm - Diameter of through spindle bore: 22.3 mm - Main drive motor power: 10 HP - Main drive motor speed (60 Hz/50 Hz): 1800/1500 rpm - Hydraulic motor speed (60 Hz/50 Hz): 1800/1500 rpm - Coolant pump speed (60 Hz/50 Hz): 3600/3000 rpm - Chip conveyor motor speed (60 Hz/50 Hz): 1800/1500 rpm - Footprint (L x W): 320 x 221 cm - Total weight of 726 REVACYCLE machine: approx. 9 t

Kondisi: baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, da-1 Isdpfx Ajy U H R Eopaotk

Kondisi: baru, gaya penekanan: 300 t, 300 t portal straightening press – gantry press – 3,500 × 2,000 mm table, 1,000 mm daylight opening The machine shown here was custom-built and delivered to a client. We can manufacture this machine for you again at short notice—tailored to your individual requirements. This is a hydraulic gantry press with 300 t pressing force for straightening, assembly, and machining of large-scale components. Base price: €142,000 net Options (upon request): The options listed are based on realized customer projects and allow targeted adaptation of the machine to the specific application. The basic machine is a functional standard version—in practice, it is usually expanded with additional equipment and configured project-specifically. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo hydraulics (energy-efficient operation) - SIEMENS S7-1200 control with 7" touch panel - Radio remote control (with or without display) - Air/oil heat exchanger - Ejector system in table (various designs possible) ==== Technical Data + Information: ==== General Information Design: Gantry press Pressing force: 300 t (adjustable) Itedpfsyxnzysx Apaok Total weight: approx. 10,500 kg Overall dimensions (W × D × H): 3,285 × 3,520 × 3,500 mm ==== Working Area Table size: 3,500 × 2,000 mm Daylight opening: 1,000 mm Frame opening: 2,100 mm ==== Table & Ram Table height: 750 mm (without plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transversal cylinder travel: ±900 mm Longitudinal portal travel: 3,000 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: Pendant controller Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Drag chain system - Two-layer paint (RAL colors selectable) ===== For straightening large steel components, vehicle construction, maintenance, assembly work, special fabrications. Gantry press, straightening press, hydraulic press, 300 ton press, large table press, metalworking Looking for a hydraulic press tailored to your application? Contact us for a custom offer. Our hydraulic presses are manufactured according to German machinery directives, the European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. In addition, our presses exceed Canadian and European safety requirements, as they comply fully with the Brazilian national safety standard NR 12, which builds upon these regulations. Our key strength lies in custom machine construction and press automation. We supply customized hydraulic presses at surprisingly attractive prices. The hydraulics of our presses predominantly feature components from leading European manufacturers.

Kondisi: bekas, Tahun pembuatan: 1955, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: D08L/8075, Nomor penawaran: D08L/8075 Jenis mesin: Mesin pelurus dan pemotong kawat Merek: WAFIOS Tipe: DRf/30 Tahun pembuatan: 1955 Rentang diameter: 7-16 mm Panjang potongan: 6000 mm Itedewi Svispfx Apaek Kecepatan – meter/menit: 65 Lokasi: Di gudang kami

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, PRES HIDROLIK PANAS TECNOMAC PCO 3013 MESIN BARU – V380/50 – “CE” Dimensi meja: 3000 x 1300 mm Meja baja padat berlubang Pelapis meja aluminium Pemanas meja dengan minyak diatermik Boiler minyak: 27 kW Jumlah piston: 6 Ø 100 mm Tekanan total: 120 TON Ijdpfx Asy Sm S Ropajtk

Kondisi: bekas, Tahun pembuatan: 1977, 552677 Itsdpfjy Sliusx Apajk

Kondisi: bekas, Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Lini brossur lengkap terdiri dari: - Pengumpul Wohlenberg mod. Sprinter 7010 - 2001 - 16 stasiun + Manual - Lipatan flap Wohlenberg KRF - 2009 - Mesin brossur Wohlenberg mod. GOLF 6001 - 15 rahang - Hotmelt - Kasa Itsdpfxoy Shhto Apaek

Kondisi: baik (bekas), Klebebinder Planax Perfect Binder F 2, 1 penjepit, lem panas dingin, penggerusan punggung, rangka bawah, kondisi baik, siap tersedia segera Iodjx S Hzfjpfx Apastk

Kondisi: baik (bekas), Klebebinder FKS KB-2000; No. seri: 00977708041843, lem panas, 1 penjepit, sensor deteksi material. Deteksi sampul otomatis, penjepit sampul otomatis, penyerutan punggung buku, rangka bawah, dalam kondisi baik, tersedia segera. Isdex S H A Nopfx Apastk Data teknis: Format maksimum: 320 x 310 mm Ketebalan punggung: 60 mm Kapasitas: sekitar 320 buku/jam Berat: 186 kg Pasokan listrik: 230V

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jumlah rol pelurus: 19, diameter rol pelurus: 55 mm, lebar kerja: 1.600 mm, de-to-hu-271001 Itjdpfey Nxv Nsx Apask

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 6.500 h, Fungsionalitas: berfungsi sepenuhnya, Zusammentragmaschine_MullerMartini Itodpeyufk Asfx Apask

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 1.500 mm, ketebalan lembaran (maks.): 1 mm, RINCIAN TEKNIS Lebar pelat: 1.500 mm Ketebalan pelat: 1,5 mm Itjdpfex I Egrex Apask

Kondisi: bekas, Format: 0x0 Iodpfjyxqvaex Apastk

Kondisi: bekas, 380_mm_equipped Isdpfx Ajy Aghgjpaotk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, jam kerja sangat sedikit, dipasang awal 2023, kondisi sangat baik Iedpfx Apeytbz Isaetk Terdiri dari: 1 Mesin Penjilid Lem City e - dengan PUR - dengan Hotmelt - dengan jalur pendinginan dan pengeringan Wohlenberg Klebebinder City e Mesin dasar Edition 4000 untuk operasi mandiri atau inline, untuk integrasi dengan mesin kolator Sprinter dan pemotong tiga sisi Edition 5000, perlengkapan mesin yang diperluas untuk peningkatan kecepatan hingga 5.000 siklus/jam Unit lem punggung Hotmelt bergerak, 40 kg, dengan 2 rol aplikasi Unit lem punggung PUR, kompak, dapat dipindahkan – Eropa, dengan 2 rol aplikasi Unit lem samping Hotmelt, dapat dipindahkan Jalur pendinginan dan pengeringan

Tahun pembuatan: 2014, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, For sale is a SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a placement head featuring laser centering. The machine is fully operational and ready for immediate use after programming. Technical specifications: Type: placeALL 610 Year of manufacture: 2014 Placement capacity: 600 components/hour Chips: From 0402 chips up to 22x22 mm (optionally up to 32x32 mm) Laser centering: Non-contact "on-the-fly" Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520x370 mm Placement area: 620x450 mm Tooling: 5 x standard Additional features: - Camera System: Vision System II + lighting - Dispensing system: CD-05 placement tool & blow-off function - Frame adaptation; access for robotic arm from the left - Universal CAD conversion - Barcode reader for ID barcode - Camera attachment for LM-, SM-, and FP systems - and much more Feeders: - 2 pcs feeder racks with 16 slots each for tape/tubeFEEDER, front and rear side PA610 - 1 pc feeder rack with 22 slots for tape/tubeFEEDER, left and right side PA610/L - 20 pcs tapeFEEDER 8mm (max. tape thickness: 1.1mm; max. tape height: 6.0mm; max. tape width: 8.3mm; max. reel width: 17.5mm; slots: 1) - Barcode compatible - 4 pcs tapeFEEDER 12mm (max. tape thickness: 1.4mm; max. tape height: 6.0mm; max. tape width: 12.3mm; max. reel width: 17.5mm; slots: 1) - Barcode compatible - 2 pcs tapeFEEDER 16mm (max. tape thickness: 1.4mm; max. tape height: 13.0mm; max. tape width: 16.3mm; max. reel width: 30.5mm; slots: 2) - Barcode compatible, including feeder extension 908.120.007 - 1 pc tapeFEEDER 24mm (max. tape thickness: 1.4mm; max. tape height: 13.0mm; max. tape width: 24.3mm; max. reel width: 30.5mm; slots: 2) - Barcode compatible, including feeder extension 908.120.007 - 1 pc vibration tubeFEEDER (handles up to 10*SO sticks; slots: 5) - Barcode compatible - 1 pc feeder setup station with software for setup and complete component creation, connection to PC via RS232 (PC not included) - 1 special PA wire feeder for supplying and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943, cassette for 8 mm reels, width 11 mm Isdpfx Aswy U Nmjpajtk Transport and loading can be organised Europe-wide upon request and at extra cost. Prices plus VAT. Inspection is possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery trading PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Kondisi: bekas, Straightening machine, strip straightening device with adjustable LENZE geared motor Straightening machine, strip tensioner was used for cardboard approx. 350 x 1.5 mm Not suitable for use as a conventional straightening machine Type 11.712.02.10 Output speed of geared motor: 12 to 72 rpm, steplessly adjustable Torque: 80 to 40 Nm Straightening roller speed: 19 to 115 rpm Straightening roller width: 520 mm Straightening roller diameter: 90 mm Total number of straightening rollers: 4 pcs Motor power: 0.37 kW Power supply: 380 Volt, 50 Hz - Pair of pull rollers, drive of the lower rubber-coated roller via open gear drive - Speed steplessly adjustable via handwheel on the geared motor - Upper part of the straightening rollers adjustable mechanically Itsdpjdzp U Aofx Apask - Straightening unit with 3 rollers, one roller is missing (rollers in the straightening unit are not driven) - Mounted on a sturdy metal frame - Straightening machine was used for cardboard approx. 350 x 1.5 mm Required space (L x W x H): 630 x 460 x 1060 mm Weight: approx. 160 kg In good condition