Beli Mvm Mesin Pengasah Pisau Panjang bekas (80.593)

Kondisi: baru, Tahun pembuatan: 2025, Dimensi (Panjang/Lebar/Tinggi) 3120x1100x1600 mm Berat 2000 kg Total kebutuhan daya 6,4 kW Mesin Pengasah Mata Pisau Ketam GRINDER 1700 AUTO MAGNETIC Bodpfx Afjvz Hanspsdg - Lebar kerja maksimum 1700 mm - Proses kerja otomatis sumbu X - Penyesuaian otomatis sumbu Z - Meja penjepit magnetik 200 x 1700 mm - Sudut pengasahan +/- 90° - Kecepatan putar cakram pengasah 1440 RPM - Dimensi cakram pengasah Ø 205 x 115 x 145 mm - Kecepatan umpan 3-9 m/menit, dapat disesuaikan secara bertahap dengan pengubah frekuensi - Motor 5,5 kW / 400 V - Motor umpan 0,75 kW - Motor pompa pendingin 90 W - Sistem pendingin dari atas menggunakan selang fleksibel plastik mencegah mata pisau menjadi terlalu panas - Lampu halogen dengan dudukan yang dapat disesuaikan - Dimensi P=3120mm, L=1100 mm, T=1600 mm - Berat 2000 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensi (panjang/lebar/tinggi) 4600x1000x1550 mm Berat 2500 kg Total kebutuhan daya 8,5 kW Mesin pengasah mata pisau serut GRINDER 3000 AUTO MAGNETIC - Lebar kerja maksimum 3000 mm - Proses kerja otomatis pada sumbu X - Penyesuaian otomatis pada sumbu Z - Meja penjepit magnetik 200 x 3100 mm - Penyesuaian sudut pengasahan +/- 90° - Kecepatan putar cakram pengasah 1440 RPM - Cakram pengasah Ø 200 x 100 x 100 mm - Kecepatan umpan 3-9 m/menit, dapat disesuaikan secara bertahap dengan pengubah frekuensi - Motor 7,5 kW / 400 V - Motor umpan 0,75 kW - Motor pompa pendingin 90 W - Sistem pendingin mencegah mata pisau terlalu panas Bedpfevz E U Djx Afpjdg - Lampu halogen dengan dudukan yang dapat disesuaikan - Dimensi P=4600 mm, L=1000 mm, T=1550 mm - Berat 2500 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensi (panjang/lebar/tinggi) 3120x1100x1600 mm Berat 2000 kg Total kebutuhan daya 6,4 kW Mesin pengasah pisau pemotong GRINDER 1700 AUTO MAGNETIC PLC - Lebar kerja maksimum 1700 mm - Proses kerja otomatis pada sumbu X - Penyesuaian otomatis sumbu Z dengan motor servo dan kontrol PLC - Meja penjepit magnetik 200 x 1700 mm - Sudut pengasahan +/- 90° - Kecepatan putaran cakram pengasah 1440 RPM - Diameter cakram pengasah Ø 205 x 115 x 145 mm - Kecepatan umpan 3-9 m/menit, dapat disesuaikan secara bertahap dengan pengubah frekuensi - Motor 5,5 kW / 400 V - Motor umpan 0,75 kW Bdodpovz E N Isfx Afpeg - Motor pompa pendingin 90 W - Sistem pendingin dari atas menggunakan selang fleksibel berbahan plastik untuk mencegah panas berlebih pada pisau - Lampu halogen dengan dudukan yang dapat disesuaikan - Dimensi P=3120mm, L=1100 mm, T=1600 mm - Berat 2000 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensi (Panjang/Lebar/Tinggi) 1700x900x1350 mm Berat 300 kg Bsdpfovz E Idox Afpjdg Total kebutuhan daya 1,6 kW Mesin Pengasah Mata Pisau Serut GRINDER 800 MAGNETIC - Lebar kerja maksimum 800 mm - Proses kerja otomatis pada sumbu X - Panduan linier pada sumbu X dengan saluran debu - Penyesuaian manual sumbu Z - Meja penjepit magnetik 120 x 820 mm - Sudut pengasahan +/- 90° - Kecepatan putaran roda pengasah 2800 RPM - Roda pengasah Ø 150 x 60 x 32 mm - Kecepatan umpan 0-10 m/menit - Motor 1,5 kW / 400 V - Motor umpan 60 W - Motor pompa pendingin 40 W - Sistem pendingin mencegah mata pisau menjadi terlalu panas - Lampu halogen dengan dudukan yang dapat disesuaikan - Pompa pelumas dengan pelumasan terpusat - Dimensi P=1700, L=900 mm, T=1350 - Berat 300 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensi (Panjang/Lebar/Tinggi) 5600x1000x1550 mm Berat 2500 kg Total kebutuhan daya 6,5 kW Mesin Pengasah Mata Pisau Ketam GRINDER 4000 AUTO MAGNETIC LINEAR - Lebar kerja maksimum 4000 mm - Panduan linear pada sumbu X - Proses kerja otomatis pada sumbu X - Penyesuaian otomatis pada sumbu Z - Meja penjepit magnetik 2 x 2050 mm x 200 mm - Penyesuaian sudut pengasah +/- 90° Bdjdpfsvz E E Aox Afpjg - Kecepatan putar roda pengasah 1440 RPM - Ukuran roda pengasah Ø 205 x 115 x Ø 145 mm - Kecepatan umpan 0-12 m/menit, dapat disesuaikan secara bertahap dengan pengubah frekuensi - Motor 5,5 kW / 400 V - Motor umpan 0,75 kW - Motor pompa pendingin 90 W - Sistem pendingin mencegah panas berlebih pada mata pisau - Lampu halogen dengan dudukan yang dapat disesuaikan - Dimensi P=5600 mm, L=1000 mm, T=1550 mm - Berat 2500 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensi (Panjang/Lebar/Tinggi) 4600x1000x1550 mm Berat 2500 kg Total kebutuhan daya 6,5 kW Mesin pengasah mata pisau planer GRINDER 3000 AUTO MAGNETIC LINEAR - Lebar kerja maksimum 3000 mm - Panduan linier pada sumbu X - Proses kerja otomatis pada sumbu X - Penyesuaian otomatis pada sumbu Z - Meja penjepit magnetik 200 x 3100 mm - Penyesuaian sudut penggerindaan +/- 90° - Kecepatan putar roda penggerinda 1440 RPM - Roda penggerinda Ø 200 x 100 x 100 mm - Kecepatan umpan 3-9 m/menit, dapat disesuaikan secara bertahap dengan pengubah frekuensi - Motor 5,5 kW / 400 V - Motor umpan 0,75 kW - Motor pompa pendingin 90 W - Sistem pendingin mencegah mata pisau menjadi terlalu panas - Lampu halogen dengan dudukan yang dapat disesuaikan - Dimensi P=4600 mm, L=1000 mm, T=1550 mm Bdsdpjvz E Epsfx Afpjg - Berat 2500 kg

Kondisi: baru, Tahun pembuatan: 2025, Dimensi (Panjang/Lebar/Tinggi) 2450x820x1380 mm Berat 1500 kg Bsdpfxjvz E Eij Afpsdg Total kebutuhan daya 2,5 kW Mesin Pengasah Mata Pisau Ketam GRINDER 1500 AUTO MAGNETIC PLC - Lebar kerja maksimum 1500 mm - Proses kerja otomatis pada sumbu X dengan THK - Panduan linear dan corong debu - Penyesuaian otomatis sumbu Z - Meja penjepit magnetik 140 x 1500 mm - Sudut pengasahan +/- 90° - Kecepatan putar cakram pengasah 2800 RPM - Cakram berbentuk mangkuk 150 x 68 x 32 mm - Kecepatan umpan 3-9 m/menit, dapat disesuaikan secara bertahap dengan pengubah frekuensi - Motor 2,2 kW / 400 V - Motor umpan 120W - Motor pompa pendingin 90 W - Sistem pendingin mencegah pemanasan berlebih pada mata pisau - Lampu halogen dengan dudukan yang dapat disesuaikan - Dimensi P=2450, L=820 mm, T=1380 - Berat 1500 kg

Kondisi: bekas, nomor mesin/kendaraan: 1339, Lederschärfmaschine / Leather sharpening machine ZPS Gottwaldov KS-3 Serien-Nr. 01339/P2 Online-Video-Inspektion per Skype-Video Bedpfxetzc N Us Afpsdg Wir freuen uns auf Ihren Besuch – weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerort: Emskirchen / Nürnberg – Vorführung möglich

Kondisi: bekas, nomor mesin/kendaraan: 7160, Langarm-Drahtheftmaschine / Long arm wire stitching machine Polygraph 781 Carton Stitcher Model: 781/1Q50R Serial No.: 7160 Arm length: 55 cm Foot pedal Bodpsiiilmofx Afpedg Online video inspection via Skype We would be very pleased to welcome you for an inspection – further machines in stock. Immediately available – inspections possible Located in Emskirchen/Nuremberg – testing possible

Kondisi: bekas, nomor mesin/kendaraan: 8170126, Long Arm Wire Stitching Machine Polygraph 781 Carton Stitcher Model: 781/1L75FR Serial No.: 8170126 Arm length: 75 cm Foot pedal Online video inspection via Skype video We would be pleased to welcome your visit – more machines in stock Available immediately – inspection possible Bsdpfx Afeiiilqjpedg Located in Emskirchen/Nuremberg – test run possible

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: Arus searah (DC), lebar total: 550 mm, panjang total: 460 mm, tinggi total: 490 mm, tegangan masuk: 230 V, diameter roda gerinda: 100 mm, berat keseluruhan: 51 kg, frekuensi input: 50 Hz, masa garansi: 12 bulan, daya: 0,375 kW (0,51 hp), kecepatan spindel (maks.): 5.300 rpm, For grinding HSS and carbide engraving cutters, as well as single- or multi-flute end mills in various shapes, such as radius mills or cutters with negative conical angle. The universal index head is adjustable to 24 positions, allowing any specific profile angle to be achieved, with 360° or 10° free rotation permitted for grinding end mills, twist drills, and lathe tools. To change the tool, simply replace the attachment on the index head—no complex assembly required. Standard accessories: 3 collets: Ø4, Ø6, Ø8 mm Grinding wheel ×1 Twist drill grinding attachment ×1 End mill grinding attachment ×1 Lathe tool grinding attachment ×1 Bdjdpfx Afsq E Ry Hepsg Optional: Collets: Ø3, Ø1/8, Ø5, Ø9, Ø10, Ø12, Ø14, Ø16, Ø18 mm Max. collet capacity: Ø3 - Ø18 mm Max. grinding diameter: Ø18 mm Conical angle: 0~180° Relief angle: 0~45° Negative angle: 0~25° Speed: 5300 rpm Grinding wheel: Ø100 x 50 x Ø20 mm Motor: 375W Dimensions: 550 x 460 x 490 mm Weight: 51 kg

Kondisi: sangat baik (bekas), Mesin Pengasah Alat AUTOOL Model VS300 Bdodpfxjxfk T Aj Afpsg

Kondisi: sangat baik (bekas), HSS saw grinding machine BUSINARO model Rekord 500 CNC Bdsdpfxev Ah Rks Afpog

Kondisi: bekas, Tahun pembuatan: 1998, Bore diameter 90 mm Stroke 490 mm Throat depth 400 mm Total power requirement 10 kW Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical honing machine Type VZH 90 / 450 F Year of manufacture 1998 Serial No. 50 / 1790 _____ Max. honing diameter 10 – 90 mm Max. honing depth 30 – 450 mm Max. spindle stroke 490 mm Spindle throat depth 400 mm Installation height under spindle nose approx. 1,200 mm Bedpfet Hw T Ssx Afpjdg Table size approx. 400 x 600 mm Max. workpiece diameter approx. 700 mm Spindle speeds steplessly variable 160 – 830 rpm Stroke speed steplessly variable 25 mm/min Spindle drive 4.5 kW Total drive power 10 kW - 400 V - 50 Hz Weight approx. 3,500 kg Overall height of the machine approx. 4,000/3,300 mm Accessories / Special equipment • Machine equipped with a Siemens S5 / Unipos 4.0 PLC control for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With fixed table 600 x 400 mm • Automatic shut-off after a specified and pre-selectable time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feed head ESZ 90/1 D • Separate hydraulics, central lubrication, workpiece clamping device on table • Currently no suitable coolant system, no honing tools included. Condition: good to very good – demonstration ready Delivery: ex stock – as inspected here Payment: strictly net – upon receipt of invoice

Kondisi: bekas, cylinder bore diameter 165 mm stroke 120 mm Bjdsw U U Iqopfx Afpodg center height 100 mm total power requirement 1.5 kW machine weight approx. 1 t SUNNEN (USA) horizontal automatic honing machine type: MBC 1804 G year of manufacture: 1K1-90075 Honing diameter range – Ø with measuring control 1.5 – 51 mm with automatic stroke 1.5 – 95 mm with manual stroke 1.5 – 165 mm Max. workpiece length approx. 400 mm Max. workpiece length with measuring control 254 mm 12 spindle speeds 200 – 2,500 rpm 5 stroke rates 80 – 310 strokes/min Stroke length with automatic stroke 6 – 120 mm Honing spindle drive/stroke motor 0.75 / 0.37 kW - 380 V - 50 Hz total drive approx. 1.5 kW - 380 V - 50 Hz Accessories / Special features: • Automatic machining cycle with automatic mechanical stroke, automatic hydro-mechanical expansion of the honing tool, and automatic shut-off when target diameter is reached. • Electromechanical measuring control opposite the tool spindle for mounting a measuring probe corresponding to the target diameter, which triggers the automatic shut-off. • Infinitely variable expansion pressure adjustment • Foot switch for manual operation • Built-in honing oil supply • Operating manuals. Unfortunately, no tool holders or other accessories included. Condition: Very good condition! Suitable for all honing tasks! A video of the machine will be available shortly—please click here. Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice.

Kondisi: bekas, Tahun pembuatan: 1977, Max. grinding diameter: 400 mm Grinding width: 0 mm Module - max.: (not specified) Bdjdpfet Hwnvex Afpsg Module - min.: (not specified) Total power requirement: 3 kW Machine weight approx.: 4.2 t Space requirement approx.: (not specified) Wheel diameter (min./max.): 64 - 320 mm Grindable module size: 1 - 12 module Max. hob width: 40 mm Number of teeth: 13 - 240 Roll radius - Ø: 73 - 320 mm Workpiece table feed rates: 5 - 20 - 30 - 40 teeth/min Grinding wheel speed: 690 rpm Grinding wheel diameter: 762 mm Grinding wheel swivel (engagement angle): 5-21° Grinding slide swivel (helix angle): 2 x 35° Vertical grinding slide adjustment: 240 mm Dressing speed: 1 / 0.5 / 0.25 m/min Grinding spindle drive / Total drive: 1.1 / 3 kW - 380 V - 50 Hz Weight approx.: 4,200 kg Accessories / Special equipment: The machine is suitable for grinding external and internal gear shaper wheels as well as for grinding master gears or cutter wheels for gear shaping machines. Unfortunately, no further accessories are available for the machine—an investment as a secondary machine is recommended if suitable tooling is already available.

Kondisi: bekas, Tahun pembuatan: 1983, Workpiece diameter 250 mm Centre distance 0 mm Maximum honing length: --- mm Maximum module: 5 FÄSSLER (Switzerland) Conventional gear honing machine Model D - 250 Year of manufacture 1983 * Serial No. 31 205.049.22 _____ Gear diameter: 10 - 250 mm Module: 1 - 5 Gear length / Max. table stroke: 500 mm Centre height of tailstocks: 220 mm Max. workpiece weight: 50/100 kg Swivel range of the honing head: +/- 35° Honing tool speeds: 20 - 500 rpm Honing tool size / width: 300 / 40 mm Workpiece speeds: 500 - 3,000 rpm Total cross slide travel: 270 mm Cross slide rapid traverse: 50 mm Cross slide mechanical infeed: 1 - 8 mm/⌀ Roughing / finishing infeed: 1-29 / 0.2-2.8 μm/sec Table speed hydraulic: 0 - 6 m/min Total drive: 5.5 kW - 380 V - 50 Hz Weight: 3,200 kg Accessories / Special equipment: - Pre-settable machining parameters via counters and control switches for automatic operation, with workpiece counter Bjdpfxjt Hwzpj Afpodg - All roughing and finishing infeeds adjustable via decade switches, table reversal times adjustable via potentiometer, rapid infeeds adjustable by time (1s = 0.04mm) - Ampere display, etc. - Capability for crowning and taper honing via templates, also possible off-centre; workpiece must be pre-machined accordingly - Stand-alone honing oil system with magnetic separator and fine filter - Mechanical tailstocks for manual loading, oil mist separator - Sliding doors with foot switch, stand-alone hydraulics

Kondisi: bekas, Tahun pembuatan: 1982, en-GB-01 Bdedpfxot Hwr Uo Afpjg

Kondisi: bekas, Tahun pembuatan: 1984, Honing diameter 12 mm Stroke 40 mm Throat depth mm Bodpot Hwvtofx Afpedg Total power requirement 15 kW Machine weight approx. 5 t Space requirement approx. m G E H R I N G 3-spindle vertical portal honing machine Type M 3-40-12 Year of manufacture 1986 _____ Honing diameter normal/maximum: 2.5 - 12 / 40 mm Max. honing depth approx.: 4-40 mm Max. spindle stroke: 40 mm Installation height table to spindle lower/upper: 300 mm Table size / Ø: 750 mm Table height above floor: 1,100 mm Spindle speeds steplessly adjustable: 800 - 4,000 RPM Stroke speed steplessly adjustable: 380 DH/min Spindle drive: 3 x 1 kW Total drive: 15 kW - 380 V - 50 Hz Weight: 5,000 kg Accessories / Special Equipment · Machine is equipped for precision honing of an automotive valve body approx. Ø12 x 40 mm high, with a blind hole of approx. Ø8 mm x 20 mm, consisting of: · BOSCH PLC control for programmable operation and "Cylindromatic S" control. · 8-station indexing rotary table, type DH 750-45, approx. Ø750 mm · Parts feed via chute, with a deburring station, pre-measurement station, and part turning station located outside the table area · Pre-honing with subsequent measuring station · Intermediate honing with subsequent measuring station · Finish honing with subsequent measuring station · Workpiece unloading and sorting for good and reject parts · MAZ-8-42 mechanical automatic adjustment heads for honing stone expansion · The 3 measuring stations operate using an air gauge plug, which enters the bore and transmits any correction values to the fine adjustment of the spindle. · Complete coolant oil system with belt filter, separate control cabinet, separate hydraulics, etc.

Kondisi: bekas, Tahun pembuatan: 1965, Bore diameter 80 mm Stroke 280 mm Throat depth 300 mm Total power requirement 6 kW Machine weight approx. 2.6 t Max. honing diameter 10–100 mm Max. honing depth approx. 250 mm Max. spindle stroke 260 mm Throat depth 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Table height above floor 500 mm Spindle speeds steplessly adjustable approx. 85–300 rpm / 170–600 rpm Stroke speeds steplessly hydraulically adjustable 0–23 m/min Spindle drive 2 kW Total drive approx. 6 kW – 380 V – 50 Hz Weight approx. 2,600 kg Accessories / Special equipment: - Mounted 2-station swivel table for holding two workpieces with mechanical workpiece clamping via hand lever. - Hydraulic feed of the tool - Shut-off via timer control, presumably with air measuring device. - Honing oil system, various splash guards, etc. Condition: good – ready for demonstration Delivery: ex stock – as inspected Bdsdet Hwupjpfx Afpog Payment: strictly net – upon receipt of invoice We await your order. Other honing machines are constantly in stock – please inquire with us.

Kondisi: bekas, Tahun pembuatan: 1996, Workpiece diameter: 240 mm Center distance: 0 mm Max. honing length: 500 mm Max. module: 5 Total power requirement: 12 kW Machine weight approx.: 5,000 kg Space requirement approx.: [missing dimension] REISHAUER (Switzerland) CNC-controlled Gear Honing Machine Model: RZR, Year of manufacture: 1996 # 74 105 Wheel diameter min./max.: 10 - 240 mm Module: 0.5 - 5 Helix angle: +/- 30 ° Workpiece slide travel (Z-axis): 275 mm Honing tool traverse (X-axis): 128 mm X-axis infeed per stroke: 0.001 mm/stroke Crowning approx.: 0.5 ° Workpiece clamping length approx.: 500 mm Max. workpiece oscillation approx.: 3,000 mm Honing tool diameter outer/inner x width: 325/308 x 45 mm Honing tool speed: 100 - 1,200 rpm Dressing speed of honing tool: 30 - 1,000 rpm Spindle drive: 4 kW Total drive: approx. 12 kW - 400 V - 50 Hz Total weight approx.: 5,000 kg Accessories / Special Equipment SIEMENS CNC path control type 810 G allows input of all relevant gear data and the setup of the workpiece via conversational interface. With DNC interface RS 232 for data import and export. A-axis = swivel angle / Z-axis = table movement / X-axis = honing tool infeed, S-axis = honing wheel speed, U-axis = crowning adjustment With integrated device for automatic threading of the honing wheel into the gear gap The tool swivel angle (A-axis) is also moved electronically, quickly, and accurately and hydraulically clamped, allowing for faster setup times. Hydraulic workpiece clamping via foot switch between workpiece spindle and tailstock; both units are movable on the workpiece table according to the workpiece. Fully enclosed working area with sliding doors and safety interlock High-end original REISHAUER honing oil filtration system Type RTO 40.10, with centrifuge and cooling unit for consistent honing oil temperature, oil mist filter, etc. Various diamond dressing tools mounted on arbors. Separate ventilated and cooled electrical and control cabinet, separate hydraulic unit. Bdodot Hwvmspfx Afpsg

Kondisi: baru, Tahun pembuatan: 2026, Mesin asah pisau gergaji cakram JMY-870 adalah perangkat yang presisi dan andal untuk mengasah pisau gergaji karbida dengan diameter mulai dari 80 hingga 700 mm. Dirancang untuk pengguna profesional, mesin ini menjamin kualitas pengasahan yang tinggi dan stabilitas operasi berkat konstruksi besi cor yang kokoh. Dalam satu set, terdapat roda gerinda berlian yang memberikan masa pakai yang lama dan akurasi pemrosesan tertinggi. Keunggulan utama mesin asah JMY-870: * Roda gerinda berlian 125 mm – ideal untuk mengasah pisau gergaji karbida. * Penyesuaian sudut pengasahan dalam rentang -35° hingga +45° – penyesuaian posisi cakram yang presisi sesuai dengan jenis pisau gergaji. * Pengaturan sudut pemotongan dalam rentang -30° hingga +85° – fleksibilitas penuh dalam memilih geometri mata pisau. * Dasar besi cor yang stabil – meminimalkan getaran dan memastikan pengoperasian yang aman. * Adaptor untuk berbagai diameter lubang dalam satu set – kompatibilitas luas dengan berbagai jenis pisau gergaji. * Satu set kunci gratis – Anda akan menerima kunci yang diperlukan untuk mengoperasikan mesin bersama dengan mesin. * Pengoperasian yang tenang – bantalan karet peredam getaran meningkatkan kenyamanan penggunaan. Konstruksi dan teknologi Mesin asah JMY-870 dilengkapi dengan set penjepit cakram yang presisi dan penyangga yang dapat dimiringkan, yang memungkinkan penyesuaian cakram yang akurat di kedua bidang. Motor yang kuat dengan daya 0,25 kW dan kecepatan putaran 2850 rpm memberikan kekuatan pemotongan yang optimal dan kualitas pengasahan yang tinggi. Presisi dan efisiensi kerja Bjdpfx Afou Tti Ispsdg Kualitas pembuatan yang tinggi dan stabilitas konstruksi menghasilkan pengasahan yang merata untuk setiap gigi pisau gergaji. Berkat rentang penyesuaian sudut yang luas dan panduan cakram yang kokoh, mesin asah ini menjamin akurasi pengasahan bahkan untuk bahan yang sangat keras. Aplikasi Mesin asah JMY-870 ideal untuk bengkel pertukangan kayu, pabrik produksi, dan juga bengkel yang bergerak di bidang perbaikan alat. Mesin ini sangat cocok sebagai mesin asah untuk pisau gergaji cakram dengan geometri yang bervariasi, dan berkat pengoperasiannya yang presisi, mesin ini juga dapat digunakan dalam mesin asah industri. Peralatan standar * Roda gerinda berlian 125 mm * Satu set adaptor untuk berbagai diameter lubang pisau gergaji * Dasar besi cor dengan bantalan karet Parameter teknis Parameter teknis MIN/MAX DIAMETER PISAU GERGAJI 80mm - 700mm KEMIRINGAN HORIZONTAL PENJEPIT MATA PISAU GERGAJI -35° hingga +45° KEMIRINGAN SET GERINDA -20° hingga +20° KECEPATAN ROTASI CAKRAM GERINDA 2850 rpm DIMENSI CAKRAM 125 x 10 x 13 mm DAYA MOTOR 0,25 kW TEGANGAN 230 V BERAT BERSIH 21 kg DIMENSI PERANGKAT 750 x 750 x 350 mm

Kondisi: baru, Tahun pembuatan: 2026, CORMAK PT310ECO Planer-Thicknesser with Cutterblock – Precision Machining and Work Efficiency The CORMAK PT310ECO is a modern planer-thicknesser designed for high-quality finishing, reliability, and low noise levels. Thanks to its cutterblock, this advanced woodworking machine combines the functionality of a jointer and thicknesser in a single, robust unit. Its stable construction and powerful motor make it a universal solution for professional wood processing, suitable for joinery workshops as well as craft shops. Key Features - Cutterblock – equipped with three HSS knives (310x25x3 mm) for long service life, precision planing, and low noise operation. Bodow Ab Twspfx Afpsdg - Heavy-duty working tables – made of cast iron to reduce vibration and ensure stable material feeding. - High power output – a 2.2 kW (S1) / 2.6 kW (S6) motor ensures consistent performance even under heavy workloads. - Large working area – working width of 310 mm and height up to 180 mm allow the processing of various workpieces. - Efficient chip extraction – Ø100 mm extraction port provides easy connection to dust extraction systems. Construction and Technology The PT310ECO model features a 75 mm diameter cutterblock, delivering smooth operation and greater durability than traditional knives. The planer-thicknesser is fitted with cast iron tables measuring 1290x310 mm (jointer) and 540x310 mm (thicknesser), both highly resistant to wear. The machine also offers angle adjustment of the fence from 90° to 45°, enabling precise material guidance even at angles. Precision and Work Efficiency The machine offers a maximum planing depth of 3 mm in jointer mode and 4 mm in thicknesser mode. With a cutterblock speed of 5500 rpm and a stable frame, it produces surfaces ready for gluing, varnishing, or further processing. This is a reliable thicknesser suitable for both serial production and small-scale jobs. Applications The PT310ECO planer-thicknesser is designed for: - professional joinery and furniture workshops, - prototyping studios and training centers, - industrial maintenance departments, - technical schools and vocational colleges. Standard Equipment - three-knife cutterblock - cast iron work tables - cutterhead guard - 100 mm extraction port - feed and emergency stop switches Optional Accessories - mobile base - chip extraction unit Technical Specifications Jointer table size: 1290x310 mm Thicknesser table size: 540x310 mm Cutterblock diameter: 75 mm Cutterblock speed: 5500 rpm Number/dimensions of knives: 3 / 310 x 25 x 2.5 mm Fence tilt angle: 90–45° Chip extraction outlet: 100 mm Max. thicknessing height: 180 mm Max. cutting depth: 3 mm (jointer) / 4 mm (thicknesser) Motor power (S1/S6): S1: 2.2 kW / S6: 2.6 kW Max. workpiece width: 310 mm Weight (gross): 200 kg Choose efficiency and durability. Select the CORMAK PT310ECO planer-thicknesser with cutterblock and bring your wood machining processes to the highest standard. Contact our technical advisor today.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2026, The high-performance CBN (borazon) grinding wheel dedicated to the CORMAK DG20 drill bit sharpener is a key component ensuring precise sharpening of drill bits made from high-speed steel (HSS) and cobalt steel. It offers unsurpassed durability and accuracy, essential for daily operations in tool rooms, mechanical workshops, or maintenance departments. Key advantages of the DG20 grinding wheel: - High hardness and thermal resistance due to the use of CBN (borazon) abrasive material. - Compatibility with the CORMAK DG20 sharpener – the wheel is designed specifically for this model to guarantee perfect fit and maximum efficiency. - Vibration-free operation thanks to precision balancing – reducing the risk of tool damage and improving user comfort. - Long service life – significantly lower frequency of wheel replacement and reduced operational costs. - Stable geometry – minimal need for frequent wheel reshaping maintains consistent sharpening quality. Bdjdoycq Hrjpfx Afpsg Construction and technology: The CORMAK DG20 drill bit sharpener wheel is manufactured using CBN technology—borazon is one of the hardest known abrasive materials, perfectly suited for machining high-speed steel tools. With precise workmanship and optimized shape, this wheel guarantees high sharpening efficiency while minimizing tool material loss. Precision and work efficiency: Using the original CBN wheel in the CORMAK DG20 model ensures excellent results even during prolonged work cycles. The wheel allows maintaining an accurate point angle (in the range of 90–135°), which translates into cutting quality, reduced cutting forces, and increased lifetime of sharpened drill bits. Its vibration-damping properties minimize the risk of micro-chipping on the cutting edges. Choose quality – opt for the original DG20 grinding wheel: The CBN wheel for the CORMAK DG20 sharpener is an essential component for anyone expecting precision and reliability during drill bit sharpening. Thanks to its construction, material, and perfect fit to the machine, it ensures long-lasting, efficient, and consistent operation. Order your original grinding wheel today and keep your sharpener in full production readiness.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Mesin Gerinda Mata Bor Otomatis Universal Brierley Model: ZB 32 Bdjdjzlhlpjpfx Afpsg Kapasitas: 2,5-32 mm Dilengkapi dengan Cam