Beli Pembungkus Palet Semi-Otomatis bekas (18.050)

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S25Lybra04, Exhibition unit - as new. LYBRA EASY / 3 Programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2,200 mm Max. pallet dimensions: 1,200 x 1,200 mm Rotating arm with high-resistance ball bearings Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrap start and at cycle end Emergency stop switch according to CE regulations Positioning aid for correct pallet placement included Safety bumper for collision protection Push buttons for machine power-on as well as start & stop functions per CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL All functional parameters adjustable via display F02 - Steplessly adjustable turntable speed 5-12 rpm Carriage speed upwards and downwards can be set independently F03 - Carriage speed upwards from 1.3 to 5.4 m/min F04 - Carriage speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at the pallet base (1 - 10 wraps) F06 - Number of wraps at the pallet top (1 - 10 wraps) F09 - Photoelectric cell delay for wrap height F62 - Ergonomic height for film change WRAPPING PROGRAMS ADJUSTABLE VIA CONTROL PANEL 3 programmable wrapping cycles F01-1 - Cross wrapping (upwards/downwards) F01-2 - Simple wrapping (upwards only or downwards only) F01-3 - Push button for manual functions F12 - Wrapping to a preset height (disabling the photo sensor for height) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for application of edge protection Soft start cycle to minimize film tearing on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Film specification: max. outer diameter Ø 250 mm - core Ø 76 mm - height = 500 mm Standard connection: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A – 1.75 kW / 8.5 A (with PRS / PS) Optionally also available with manual rope formation. Nwodpeykubijfx Abwsh Further systems available ex-stock Ludwigsburg for immediate delivery.

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S23SynthesiLow05, Demo machine, as new. SYNTHESI with flat turntable Turntable height 25 mm Short ramp 500 mm long TECHNICAL DETAILS: LOW PROFILE Turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage lift speed upwards/downwards Acoustic signal at start of wrapping and end of cycle Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power, start & stop, and reset in accordance with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All functional parameters adjustable via display Nwjdpeykuiaefx Abwjh F00 - Display lock for program changes F02 - Steplessly adjustable turntable speed 5–12 rpm Carriage speed upwards and downwards can be adjusted independently F03 - Carriage lift speed upwards from 1.3 to 5.4 m/min F04 - Carriage lift speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1–10 wraps) F06 - Number of wraps at pallet top (1–10 wraps) F09 - Delay of photocell for wrap height F13–F16 - Film application tension base & top wrapping / ascent & descent individually adjustable F62 - Ergonomic film change height Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 programmable wrapping cycles F01-1 - Cross wrapping (upwards/downwards) F01-2 - Simple wrapping (upwards only or downwards only) F01-3 - Push button for manual functions F10–F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (photocell height sensing disabled) F22/F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for edge protection application F30–F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft start function to reduce film tears on sharp pallet edges Wrapping cycle with manual or powered rope-threading (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch set to 200% Film application tension electronically controlled via control unit Film specifications: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection: 230V – 1Ph+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: OPRS pinion for pre-stretch ratios of 150% / 250% / 300% available Additional machines available from stock in Ludwigsburg.

Tahun pembuatan: 2026, jam operasional: 1 h, Kondisi: seperti baru (mesin pameran), nomor mesin/kendaraan: S23SFERA05, Mobile Stretch Wrapper ATLANTA SFERA Easy TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height "Machine with MAST (pallet included) 2,150 mm Height detection by photoelectric sensor or input via display Protective bar for emergency stop of drive system Emergency stop switch in accordance with CE regulations Audible warning signal and warning light at machine start Crash protection for film carriage Push buttons for start & stop Machine operation in accordance with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL: All function parameters adjustable via display F00 - Display lock for program change F02 - Adjustable machine speed around the pallet up to 80 m/min Carriage speed upwards and downwards adjustable independently F03 - Upward carriage speed from 1.3 up to 5.4 m/min F04 - Downward carriage speed from 1.3 up to 5.4 m/min F05 - Number of wraps at the bottom of the pallet (1 - 10 wraps) F06 - Number of wraps at the top of the pallet (1 - 10 wraps) F09 - Setting the pallet wrapping height F13 - F16 - Film tension for bottom & top wrapping / ascent & descent adjustable independently F17 - F20 - Film pre-stretch for bottom & top wrapping / ascent & descent adjustable independently F62 - Ergonomic height for film change Film consumption display (option for PRS – PS) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL: 6 programmable wrapping cycles for SFERA EASY F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Simple wrapping (either upwards or downwards only) F10 - F11 - Wrapping cycle with specified start and stop height F12 - Wrapping to a stored height (disabling the height sensor) F21 - Wrapping cycle for large-size pallets F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for application of edge protection F30 - F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motor-operated roping (optional) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Brake adjustable manually from the carriage via tension roller Film specification: Max. outer diameter Ø 250 mm - Core Ø76mm - Height = 500 mm Nwedpjykty Dsfx Abweh Optional: Stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optional available: - Wrapping height up to 3500mm - FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% - FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120-400% - Automatic roping system for reinforcement wrap - Automatic system for cutting the film into 3 strips for “BANDEROLL WRAPS” - Machine variant for temperatures down to -5°C - BATTERIES LITHIUM RELION 2 x 12V Additional units available from stock in Ludwigsburg. Image similar.

Tahun pembuatan: 2025, jam operasional: 1 h, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SFERA21Kommission1, Stretch Wrapper ATLANTA SFERA Easy 6 user-programmable memory settings Wrapping height: 2200 mm Mast height: 2050 mm (fits through almost any doorway) FE electromagnetic film brake Film tension electronically controlled via control unit Film specifications: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm GMK (Compass): Wrapping start and end are always identical Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries, 12 V – 100 Ah, connected in series 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height (machine with mast, incl. pallet): 2,150 mm Height detection via photoelectric sensor or manual input on display Safety bar for emergency stop of drive unit Emergency stop switch in accordance with CE standards Acoustic warning signal and beacon when machine starts Fall protection for the film carriage Push buttons for start & stop Machine operation compliant with CE standards, Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL: All functional parameters adjustable via display F00 – Display/program lock F02 – Adjustable machine speed around the pallet up to 80 m/min Carriage speed up/down adjustable independently F03 – Carriage upward speed from 1.3 to 5.4 m/min F04 – Carriage downward speed from 1.3 to 5.4 m/min F05 – Number of bottom wraps (1–10 rotations) F06 – Number of top wraps (1–10 rotations) F09 – Wrapping height setting F13–F16 – Film tension at foot & top wrap / ascent & descent independently adjustable F62 – Ergonomic height for film change PROGRAMMABLE WRAPPING CYCLES AT THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY Nwedjykuhpspfx Abwoh F01-1 – Cross wrapping (upwards/downwards) F01-2 – Simple wrapping (only up or only down) F10/F11 – Wrapping cycle with preset start and stop height F12 – Wrapping to a preset height (disables the photo sensor) F21 – Wrapping cycle for pallets with large dimensions F22/F23 – Wrapping cycle for top sheet film F29 – Soft start cycle for application of edge protection F30/F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Optional photocell for dark packages *Leasing: Term 48 months // 0 down payment The unit was in service as a replacement machine at a customer’s site for 3 months. Shows some scratches – including on the housing – see photos. Unit in excellent condition. We are happy to send more photos upon request. Unit can be inspected in Ludwigsburg by appointment. Immediately available. Price ex works Ludwigsburg

Tahun pembuatan: 2024, Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, Thanks to its compact dimensions and quick tool changeover, this tray sealer is the ideal solution for small delicatessens and supermarkets. The machine can be equipped with the patented modular INFINITY J-Pack mold or with custom-made tooling. Optionally available with gas flushing. Features: - Quick tool change - Tooling according to customer specifications - Automatic film unwinding - Buzzer at end of cycle - Partial and total cycle counters Technical data: - Dimensions: 295 mm x 450 mm x 550 mm - Weight: 25 kg - Max. tray size: 260 mm x 195 mm x 155 mm - Max. film width and diameter: W= 210 mm / Ø 200 mm - Power supply: Electric - Tray feed and handling: Manual + Electric - Tooling: Infinity / Fixed, non-punched - Cycles per minute: 3 - 8 Njdpfxol Eylao Abwjwh - Individual digital sealing programs: 9 - Power supply: 220 V / 750 W

Tahun pembuatan: 2025, Kondisi: baru, Automatischer Palettenspender ist das Rückgrat Ihrer Automatisierungsprozesse. Mit bis zu 10 Europaletten (1200x800 oder 1200x1200) beladen, entfällt das manuelle Vorbereiten jeder einzelnen Palette – das spart Zeit und reduziert die körperliche Belastung der Mitarbeitenden. Stattdessen gibt das Gerät Paletten auf Knopfdruck oder nach voreingestelltem Algorithmus auf ein motorisiertes Rollenband ab, das sie zur weiteren Verarbeitung weitertransportiert. Der PD-10 kann mit verschiedensten Palettierlösungen kombiniert werden. Fassungsvermögen: bis zu 10 Europaletten Nedehbg Uxepfx Abwowh Beladung per Gabelstapler Reduziert körperliche Belastung Steigert Effizienz

Kondisi: bekas, Tahun pembuatan: 1995, Mesin untuk menyusun karton atau botol di atas palet dan membungkusnya dengan stretch film. Produsen: KRONES Nodpjyrf Atjfx Abwowh Model: PALMASTER Tahun produksi: 1995 Paket termasuk mesin wrapping palet stretch OCTOPUS dengan penekan. Mesin bekas, masih terpasang – persis seperti pada foto. Dokumentasi teknis tersedia. Tersedia juga depalettizer KRONES dalam penawaran.

Tahun pembuatan: 2026, Kondisi: baru, Seaming of cans via crimping. Semi-automatic model, the can must be manually positioned underneath the seaming unit. - Specifications: Can diameter: customer-specific; Can height: customer-specific; Max. machine cycle rate in idle mode: 20 cycles/min; Power supply: 220/380V, 0.55kW; Machine dimensions: L400×W600×H1450mm; Weight: 150kg. Nedpfov Nk Thex Abwowh Please note that our new machine prices are often lower than the typical prices for used equipment. Feel free to contact us and let us know your packaging requirements. - We usually have 30–50 different new machines available from stock for immediate delivery. For custom-built machines, we also offer particularly short lead times starting from around 3 weeks. - All machines are available with a full warranty.

Tahun pembuatan: 2022, Kondisi: baru, ROBOPAC WRAPMAN Mesin pembungkus stretch film dengan kereta film friksi dan pengaturan tegangan manual. Mesin baru - mesin showroom • Diameter gulungan maks: 1,80 m • Tinggi palet maks: 2,00 m • Dimensi: 2.518 mm x 1.012 mm x 570 mm Nwedpfoytb Iuox Abwsh • Berat total: 116 kg

Kondisi: baik (bekas), Tahun pembuatan: 2019, C y C Cresco envolvedora de palets Número de serie: C1900145M Nwsdpfx Abetu N Dxewjh Año 2019, envolvedora de palets, diámetro del plato giratorio 1650 mm, controles ajustables de velocidad y tensión, capacidad 2000 kg, incluye rampa, alimentación monofásica (1Ph)

Kondisi: hampir baru (bekas), 12fill VMP Halbautomatische Abfüllmaschine Nwodpfx Abjhpqvyjwsh Halbautomatische Abfüllmaschine mit volumetrischem Dosiersystem, ideal für Pasten, Cremes, Saucen und Pasteten, Füllvolumen von 100 ml bis 1.000 ml, bis zu 25 Abfüllungen pro Minute, fahrbares Gestell mit Fußpedal.

Kondisi: baru, 1 brand new semi-automatic high-performance horizontal bandsaw with double-column guide and 2° cutting angle to the table support surface Make: HUVEMA / BEKA-MAK, Origin Turkey Model: BMSY 330 C Technical Specifications: Nwedpfx Absfk Eu Njwsh Saw capacity 90° round: 330 mm Saw capacity 90° rectangular: 360 x 330 mm Saw capacity 90° square: 330 mm Saw capacity 45° round: approx. 250 mm Saw capacity 45° rectangular: approx. 250 x 325 mm Saw capacity 45° square: approx. 250 mm Blade dimensions: 5000 x 34 x 1.1 mm Infinitely variable band speed: 20 - 100 rpm Working height: 635 mm Motor power: 3 kW Hydraulic motor: 0.55 kW Dimensions L x W x H: 2830 x 920 x 1630 mm Machine weight: 1030 kg Accessories / Special Features: • Semi-automatic double-column bandsaw • Linear guides • 2° cutting angle to table surface • Infinitely variable cutting speed via potentiometer at the control panel • Hydraulic vice • Hydraulic-mechanical blade tensioning • Powerful drive motor • Sensitive cutting pressure regulation • Thermal overload protection • Optical height adjustment • Heavy-duty gearbox • Coolant system • Infeed roller conveyor 1200 mm • Chip removal brush • 1 pc. bi-metal saw blade • Control panel • CE compliant Delivery time: approx. 8 weeks after receipt of order Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6153102135, Gebrauchte halbautomatische Schwenkrahmen-Bandsäge, KASTOmicut U2.6, Baujahr: 2023, Seriennummer: 6153102135, hervorragender Zustand, sehr wenig genutzt. Lieferung erfolgt mit der auf den Bildern abgebildeten Rollenbahn. Universelle, halbautomatische Bandsägemaschine in besonders robuster Ausführung, konzipiert für den rauen Werkstatteinsatz und in der Lage, sämtliche Abläng- sowie Gehrungsschnitte (-45°/+60°) an Rohren, Profilen und Vollmaterial präzise auszuführen. Der stufenlos einstellbare Schnittgeschwindigkeit sowie der stufenlos regulierbare, vollhydraulische Sägevorschub sorgen für einen sensiblen und sägebandschonenden Schnitt. Technische Daten: Schnittbereich 90° rund: 260 mm Nwodpfx Aevyl Dvsbwsh Schnittbereich 90° flach (B x H): 310 x 260 mm Abmessungen (L x B): 760 x 1620 mm Höhe, Sägekopf unten: 1690 mm Höhe, Sägekopf oben: 2040 mm Materialauflagehöhe: 950 mm Gesamtgewicht: 510 kg Leistungsmerkmale: Gesamtleistung: 2,0 kW Sägemotor, frequenzgeregelt: 1,5 kW Schnittgeschwindigkeit stufenlos regelbar – frequenzgeregelt: 20 – 110 m/min Sägebandmaße: 3180 x 27 x 0,9 mm Sägebandführung: seitliche Führungsrollen und Rückenlager, austauschbar Materialspannung: mechanisch Sägevorschub: hydraulisch, stufenlos regelbar Sägebandspannung: mechanisch Sägebandreinigung: synchron laufende, leicht austauschbare Bürste Elektrische Ausrüstung gemäß DIN EN 60204. Versorgungsspannung 440 Volt, 60 Hz. Steuerstromkreis: 24 Volt. Arbeitszyklus (Halbautomatisch): Stufenlos regulierte, vollhydraulische Sägevorschubsteuerung Drehtisch als Materialauflage Horizontale Spannvorrichtung mit Schnellverstellung und hydraulischem Kurzhub Stufenlos regelbare Schnittgeschwindigkeit 20–110 m/min über frequenzgeregelten Antrieb Kühlsystem mit zwei Düsen Automatische Abschaltung nach Schnittende und Rückhub des Sägekopfes um ca. 100 mm Stufenlose Gehrungsverstellung (-45° bis +60°) Stufenlose Sägearm-Verstellung Elektrische Absicherung der Sägeabdeckungen (Unfallverhütungsvorschriften) Synchron laufende Spänebürste Bohrungen für Bodenverankerung Bi-Metall Sägeband, 4–6 ZpZ Betriebsanleitung gemäß EU-Maschinenrichtlinie und EN 82079 Preis: 15.428 Euro + MwSt., verhandelbar, FCA Oradea/Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français / Vorbim romana.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, Gebrauchte halbautomatische Schwenkrahmen-Bandsäge, KASTOmicut U2.6, Baujahr: 2023, Seriennummer: 6153102136, exzellenter Zustand, kaum benutzt, Lieferung erfolgt mit den auf den Bildern abgebildeten zwei Rollen. Universelle, halbautomatische Bandsägemaschine in äußerst robuster Bauweise, ausgelegt für den harten Werkstatteinsatz und in der Lage, jegliche Abläng- sowie Gehrungsschnitte (-45°/+60°) an Rohren, Profilen und Vollmaterialien präzise auszuführen. Die stufenlos einstellbare Schnittgeschwindigkeit sowie der stufenlos regulierbare, vollhydraulische Sägevorschub ermöglichen einen materialschonenden Schnitt bei maximaler Standzeit des Sägebandes. Technische Daten Schnittbereich 90° Rund: 260 mm Schnittbereich 90° Flach (B x H): 310 x 260 mm Abmessungen (L x B): 760 x 1620 mm Sägehöhe, Kopf unten: 1690 mm Sägehöhe, Kopf oben: 2040 mm Materialauflagehöhe: 950 mm Gesamtgewicht: 510 kg Leistungsmerkmale Gesamtleistung: 2,0 kW Sägemotor, frequenzgeregelt: 1,5 kW Schnittgeschwindigkeit stufenlos regelbar, frequenzgeregelt: 20 – 110 m/min Sägebandabmessung: 3180 x 27 x 0,9 mm Bandführungen: Seitliche Führungsrollen und Hinterlager, austauschbar Materialspannung: mechanisch Sägevorschub: hydraulisch, stufenlos regelbar Sägebandspannung: mechanisch Bandreinigung: mittels synchron laufender, einfach auswechselbarer Bürste Elektrische Ausrüstung gemäß DIN EN 60204. Versorgungsspannung 440 Volt, 60 Hz. Steuerspannung 24 Volt DC. Andere Spannungen auf Anfrage gegen Aufpreis. Arbeitszyklus (Halbautomatik): - Stufenlos einstellbare, vollhydraulische Sägevorschubsteuerung Nsdpfxjvyl Ihe Abwjwh - Drehtisch dient als Materialauflage - Horizontalspanner mit Schnellverstellung und hydraulischem Kurzhub - Stufenlose Schnittgeschwindigkeit (20 – 110 m/min) per Frequenzumrichter - Kühlsystem mit zwei Düsen - Automatische Abschaltung nach Schnittende und Rückhub des Sägekopfes ca. 100 mm - Stufenlose Gehrungsverstellung (-45° bis +60°) - Stufenlose Sägerahmenverstellung - Elektrischer Schutz der Bandsägenabdeckungen (Unfallverhütung) - Synchron laufende Spänebürste - Dübelbohrungen zur Maschinenbefestigung - Bi-Metall-Sägeband, 4 – 6 Zähne/Zoll - Bedienungsanleitung gemäß EU-Maschinenrichtlinie und EN 82079 Preis: 16.456 Euro zzgl. MwSt., verhandelbar, FCA Oradea/Rumänien Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Deutsch. / We speak English. / Beszélünk magyarul. / Nous parlons français. / Vorbim româna.

Kondisi: baik (bekas), Tahun pembuatan 2015 Koneksi 400 V 16 A CEE Njdpfx Aboyyxvkswewh Diameter piringan 1.800 mm Pengenalan palet otomatis termasuk tinggi

Kondisi: baru, Tahun pembuatan: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is distinguished by its user-friendly operation and quick, convenient material changeovers. This model is designed exclusively for 90° cuts. The saw feed is actuated automatically at the push of a button, while material clamping is performed by two pneumatically operated vertical and horizontal clamping cylinders each. As standard, the machine comes equipped with a minimal lubrication system and an air blow gun for cleaning the machine. Connections for a chip extraction system are provided. Optionally, this saw can be fitted with a digital miter angle display, a marking laser, and a pneumatic guard lifting mechanism. Features - Large support table, powerful drive motor - Two-button control for initiating the sawing cycle (optionally available with single-button operation) - User-friendly control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be moved rearwards to increase cutting capacity - Large protection hood covering the entire working area - Minimal lubrication system with 2-liter reservoir - Adjustable saw blade and feed rate - Air pistol for cleaning the machine - Saw blade diameter: 600 mm Work Sequence 1. Set the cutting angle 2. Insert the material 3. Adjust the feed speed 4. Position the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button to ready the machine 7. Press and hold both SAW buttons to start cutting 8. After the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material For technical data such as cutting range and performance, please refer to the data sheet attached to the email. Nwodpepa Nxdsfx Abwsh We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, Aluminium Circular Saw UK 650 HA, Semi-Automatic The semi-automatic circular saw UK 650 HA is an upcut machine, primarily used for cutting profile materials made from cast aluminum, copper, and hard plastics (solid materials possible to a limited extent). This machine is characterized by its user-friendly operation, quick and convenient material changeover, as well as easy miter angle adjustment. The UK 650 HA offers stepless miter adjustment to both the left and right up to 20° (swivel range: two times 70°). Saw feed is triggered automatically at the push of a button, while material clamping is performed by two pneumatically controlled vertical and two horizontal clamping cylinders. As standard, the machine comes equipped with a minimal lubrication system and an air blow gun for cleaning. Connections for chip extraction systems are also provided. In addition, this machine can optionally be fitted with a digital miter angle display, a marking laser, and pneumatic lifting for the safety guard. Features - Double miter 20° – 90° – 20°, large support table - Powerful drive motor - Two-button control for initiating the saw cut (optional single-button control available) - Clearly arranged control panel - Adjustable blade and feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic blade lifting with oil level indicator - Fixed material stop can be moved backward to increase cutting capacity - Large safety guard covering the entire working area - Minimal lubrication system with a 2-litre reservoir - Air blow gun for machine cleaning - Saw blade Ø 650 mm Operating Procedure 1. Set the cutting angle 2. Insert the material 3. Adjust the stroke speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. Press the Start button to make the machine ready for operation Nwodpfx Aboidun Djwoh 7. Press and hold both SAW buttons; material will be cut 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material You are welcome to view the desired equipment anytime in our production/demo hall. Please feel free to contact us to arrange a visit. We look forward to hearing from you! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, The semi-automatic circular saw UK 352 HA is an 'upcut' machine, primarily used for cutting profile materials made of die-cast aluminum, copper, and hard plastics (also suitable for solid materials to a limited extent). The machine is distinguished by its ease of operation, quick and convenient material change, and simple mitre angle adjustment. The UK 352 HA features a continuously adjustable mitre range—up to 45° to the left and 0° to the right. Saw feed is automatic and activated by push button; material clamping is achieved via two pneumatically operated vertical clamping cylinders. A minimal lubrication system and an air spray gun for cleaning the machine are included as standard! Connections for a chip extraction system are provided on this machine. Equipment • Precision under-table circular saw • Mitre adjustment: left 45°, 90°, right 45° • Incl. 2 pneumatic (vertical) clamps • Infinitely variable saw blade feed • Two-hand safety control • Adjustable rear material stop • Connection for chip extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included Nwodpfx Absgwt Rrjwjh • Ergonomically positioned control panel • Max. cutting height 125 mm • Saw blade 350 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at our production/showroom at any time. Please feel free to contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine primarily used for cutting profile materials made from cast aluminum, copper, and hard plastics (solid materials only to a limited extent). The machine is notable for its user-friendly operation, quick and convenient material change, and simple mitre angle adjustment. The UK-400 A offers a continuously adjustable mitre range to the left and right up to 20° (swivel range of twice 70°). Saw blade feed is automatic via push button, and the material is clamped by two pneumatically controlled vertical and horizontal clamping cylinders each. Standard equipment for this machine includes a minimum quantity lubrication system and an air blow gun for cleaning. Connections for a chip extraction system are provided. Optionally, this machine can be fitted with a digital mitre angle display, a marking laser, and pneumatic lifting for the safety hood. Equipment • Precision under-table circular saw • Stepless mitre adjustment 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Stepless adjustable saw blade feed • Two-hand safety control system • Adjustable rear material stop • Extraction device - chip extraction system • Mist spraying unit for air-oil cooling • Air blow gun with spiral hose • Maintenance unit with pressure regulator included • Ergonomically arranged control panel Nwsdpogwt Rnofx Abwsh • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included! You are welcome to view the desired unit at any time in our production/demo hall. Please feel free to contact us to arrange a visit. We look forward to hearing from you! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material only conditionally). This machine is characterized by its ease of operation, quick and convenient material changes, and simple adjustment of the mitre angle. The UK 352 HA offers stepless mitre adjustment from 45° to the left and 0° to the right. The saw feed operates automatically at the push of a button, and the material is clamped by two pneumatically controlled vertical clamping cylinders. The standard configuration includes a minimum quantity lubrication system and an air spray gun for cleaning the machine. Connections for a chip extraction system are also available on this machine. Nsdpegwt Ryefx Abwswh Features: • Precision under-table circular saw • Mitre adjustment: 45º left / 90º center / 45º right • Includes 2 pneumatic clamps (vertical) • Stepless adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device port • Mist lubrication device for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically positioned control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in the delivery! We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, tekanan: 6 batang, The semi-automatic circular saw UK-600-A is an upcut machine, primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid materials possible within limits). The machine stands out for its user-friendly operation, quick and convenient material changeover, and easy mitre angle adjustment. The UK-600 A offers stepless adjustment of the mitre angle to the left and right up to 20° (total swivel range 2 x 70°). Saw feed is automatically initiated at the push of a button, while material clamping is provided by two pneumatically operated vertical and two horizontal clamping cylinders. Standard features of this machine include a minimum-quantity lubrication system and an air blow gun for cleaning. Connections for a chip extraction system are available. Optionally, the machine can be equipped with a digital mitre angle display, a layout laser, and pneumatic lifting for the safety guard. Equipment: • Precision under-table circular saw • Infinitely adjustable mitre setting 0º / 45º / 90º / -45º / -60º • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction facility • Minimum-quantity air-oil spray cooling system • Air blow gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically positioned control panel • Max. cutting height 230 mm Nsdpsgcbwgefx Abwjwh • Saw blade 600 mm • Saw blade not included in delivery! You are welcome to view the desired machine at any time in our production/demo hall. Please feel free to contact us regarding this. We look forward to your enquiry! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, The semi-automatic circular saw UK 500 HA is an "upcut" machine, predominantly used for cutting profile materials made of cast aluminium, copper, and hard plastics (solid materials to a limited extent). The machine stands out due to its ease of operation, quick and convenient material changeover, as well as straightforward mitre angle adjustment. The UK 500 HA features a continuously adjustable mitre range of up to 30° to the left and 0° to the right. Saw feed is automatic via push-button control, and material clamping is achieved through two pneumatically operated vertical and two horizontal clamping cylinders. As standard, the machine is equipped with a minimum-quantity lubrication system and an air blow gun for cleaning. Provisions for the connection of a chip extraction system are available on this machine. Nwsdpfxsgwt R De Abwjh Equipment: • Precision under-table circular saw • Mitre adjustment 0º/ 45º/ 90º/ -45º / -60º, stepless • Incl. 2 pneumatic clamps (vertical) • Continuously adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction unit – chip extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 180 mm • Saw blade 500 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our production/showroom hall. Feel free to contact us to arrange this. We look forward to your inquiry! Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, Aluminum Circular Saw BC 450 HA, Semi-Automatic (MG FRONT-450) The BC 450 HA is a double mitre saw with a swiveling range of 45° to the left and 22.5° to the right, featuring automatic mitre adjustment via stop functions. The saw feed operates automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety cover. Equipment: - Double mitre saw with high-performance drive motor - Two-button control for initiating the cutting cycle (optionally available with single-button control) - Large mitre range from -22.5° to +45°, swivel range 67.5° – 0° – 45° - Automatic mitre adjustment, fixed stop functions at -45° / 90° / +45° and two configurable variable stops for custom angles Nwodpfx Abspa Nxaowoh - Two horizontal pneumatic clamping cylinders - User-friendly control panel - Large safety cover fully encloses the working area, pneumatically lifted - Adjustable saw blade/feed rate - Connections for extraction system - Minimum quantity lubrication system - Air gun for cleaning the machine - Saw blade ø 450 mm Operating procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the feed speed 4. Move the clamping cylinders up to 20 mm towards the material 5. Clamp the material 6. Activate the START button to make the machine ready for operation 7. Press and hold both SAW buttons to perform the cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, Aluminum Circular Saw UK 800 HA, Semi-Automatic The semi-automatic circular saw UK 800 HA is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials only to a limited extent). The machine stands out for its user-friendly operation, rapid and convenient material change, and easy mitre angle adjustment. The UK 800 HA features a continuously adjustable mitre range of up to 20° to the left and right (pivot range of 2 x 70°). Saw feed is automatic by push-button, while material clamping is achieved with two pneumatically controlled vertical and two horizontal clamping cylinders each. Standard equipment for this machine includes a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are provided. Optionally, the machine can be equipped with a digital mitre angle display, a laser marking system, and a pneumatic system for lifting the safety guard. Features Double mitre 20° – 90° – 20°, large support table Powerful drive motor Two-button control for triggering the cutting cycle (optional single-button operation available) Clear operator control panel Adjustable blade/cut feed rate Njdpfx Asidun Iebwowh Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic blade lift with oil level indicator Fixed material stop can be moved backwards to increase cutting capacity Large safety hood fully covering the working area Minimum quantity lubrication system with 2-litre reservoir Air blow gun for machine cleaning Saw blade ø 800 mm Work Process 1. Set cutting angle 2. Insert material 3. Adjust feed speed 4. Move clamping cylinders to within 20 mm of the material 5. Clamp material 6. Press start button – the machine is now ready 7. Press and hold both SAW buttons to commence cutting 8. After the cycle is complete, release both SAW buttons and press STOP 9. Open vice and remove or advance material You are welcome to view the machine at our production/showroom at any time. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Kondisi: baru, Tahun pembuatan: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid materials to a certain extent). The machine stands out for its straightforward operation, quick and convenient material change, and easy mitre angle adjustment. The UK 352 HA has a continuously adjustable mitre range: left up to 45° and right up to 0°. Saw feed is automatic at the push of a button, and the material is clamped by two pneumatically operated vertical clamping cylinders. As standard, the machine is equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine! The unit is also prepared for connection to a chip extraction system. Equipment: • Precision under-table circular saw Njdpfx Aogwt Rvsbwowh • Mitre adjustment: left 45º / 90º / right -45º • Including 2 pneumatic vices (vertical) • Infinitely variable saw blade feed • Two-hand safety control • Adjustable rear material stop • Extraction device for chip extraction system • Spray mist system for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure regulator • Ergonomically arranged operator panel • Maximum cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our production/showroom. Please feel free to contact us. Plantec Maschinen GmbH