Beli Pitzmann & Pfeiffer Pers Hidrolik Kolom Ganda bekas (25.599)

Kondisi: diremajakan ulang (bekas), Rexroth axial piston pump AKP140R with valve for ENGEL Type: AKP140R with valve Manufacturer number: R901021899 Model code: SYDFEE-20/140R Lrsdpfjx Uqxaox Al Nep

Kondisi: bekas, Tekanan 110 ton Jangkauan 290 mm Langkah 20-124 mm Jumlah langkah 60 / 90 langkah/menit Penyesuaian plunger 85 mm Luas meja sekitar 920 x 590 mm Luas plunger sekitar 530 x 280 mm Jarak antara meja dan bagian atas mesin press sekitar 450 mm Lubang untuk benda kerja di meja sekitar 180 x 300 mm Tinggi meja sekitar 750 mm Lubang pin pada plunger Ø 50 mm Jam operasi 8214 jam Jarak antara meja dan bagian atas mesin press mm Berat mesin sekitar 5,5 ton Dimensi sekitar 2000 x 2000 x 2600 mm direkondisi di pabrik Helmerding pada tahun 2014, termasuk perubahan menjadi sistem kontrol keselamatan mesin press yang baru. Jam operasi yang tercatat sejak rekondisi 2014: 8214 Dokumentasi sistem kontrol keselamatan mesin press tersedia. Lrsdpfxot Ei Hno Al Nop Pelumasan terpusat elektrik Kombinasi kopling-rem hidraulik Pelat pelindung mekanis pada plunger Pengoperasian dengan kedua tangan Pengoperasian dengan kaki

Tahun pembuatan: 1980, jam operasional: 7.663 h, Kondisi: bekas, Pressing force: 320 t Throat depth: 800 mm Stroke: 630 mm Max. distance table/ram: 1000 mm Ram dimensions: 710 x 600 mm Table size: 800 x 1200 mm Working height: 1015 mm Oil capacity: 1100 l Operating hours: 7663 h Machine weight approx. 15 t Ledsd Ih Nrjpfx Al Nerp Dimensions approx. 1600 x 2200 x 4800 mm Control cabinet dimensions approx. 1200 x 400 x 1800 mm Function tested. During the test run, it was noticed that the press ram is not 100% leak-proof. Additionally, the hand control cable has been repaired several times. The cover is missing, as it was removed by the customer to enable crane operation. Operating manual and electrical diagrams are available.

Tahun pembuatan: 1978, Kondisi: bekas, Press force 2000 / 1000* t Column distance 2650 mm Stroke 500 mm Side opening between columns 500 x 1000 mm Plunger diameter 710 mm Number of pressure cylinders 2 Distance table / ram 1000 mm Operating pressure 130 / 230 bar Lrodsd Ih Ncjpfx Al Nep Overall height 800 mm Table length 2500 mm Table width 1600 mm Table height 250 mm Return force 500 kN Number of T-slots 8 Spindle speed 1500 rpm Rapid traverse speed 120 - 140 mm/min Closing speed max. 120 - 140 mm/sec Ram return via small separate cylinder 100 - 110 mm/sec Hydraulic ram locking Noise suppressor 300 t Cushion force 200 t Cushion stroke 250 mm Cushion speed 100 mm/sec Frequency 50 Hz Voltage 380 V Oil volume 2000 l Total power requirement 93 kW Machine weight approx. 100 t Space requirement approx. 5000 x 2500 x 7200 mm Transport dimensions approx. 6500 x 3750 x 2190 mm *Conversion: 1991 installation of a drawing cushion, new nameplate due to pressure reduction – PO 1000: Machine is currently limited to 1000 tonnes (Reason: tools were only rated for 1000 tonnes) The press ran flawlessly until it was dismantled and replaced by a press line. Important for accident prevention regulations (UVV): The press is equipped with a hydraulic ram locking system!

Kondisi: bekas, Pressing force 200 t Distance between uprights 1600 mm Maximum ram stroke 600 mm Installation height 900 mm Table width 1600 mm Table depth 1300 mm Table height 1060 mm Ram surface area 1600 x 1300 mm Lsdpfx Aleg S R Twj Nsrp T-slots DIN 650 / 22H12 Rapid traverse 400 mm/s Return speed 325 mm/s Pressing speed 42 mm/s at 40% Pressing speed 20 mm/s at 100% Drawing cushion force 800 kN Drawing cushion stroke 150 mm Drawing cushion speed up 68 / down 225 mm/s Retrofit year 2001

Kondisi: sangat baik (bekas), Tahun pembuatan: 1969, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 160 t, panjang langkah: 650 mm, lebar meja: 1.200 mm, panjang meja: 800 mm, tinggi kerja: 600 mm, Perlengkapan: penghadang cahaya keselamatan, Lasco TSP 160S Very well-maintained press available for sale from a decommissioned stamping facility in Poland. Upgraded in 2019: - Equipped with a new Simatic S7 control system - New electrical cabinet installed Ljdpfx Aljv E Rd Eo Nerp - Optical safety barriers fitted The machine remains fully connected to power and operational, allowing for inspection during actual operation.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1962, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 200 t, panjang langkah: 800 mm, lebar meja: 970 mm, panjang meja: 1.600 mm, tahun perombakan terakhir: 2022, gaya bantalan cetakan: 40 t, Perlengkapan: penghadang cahaya keselamatan, Prensa Lasco FP 222 S Prensa en muy buen estado técnico a la venta por cierre de una planta de estampado en Polonia. Modernizada en 2022. Nuevo sistema de control Simatic S7 y nuevo armario eléctrico. Barreras ópticas instaladas. Posibilidad de comprobar la máquina en funcionamiento: la prensa sigue conectada a la corriente. Presse Lasco FP 222 S Presse en très bon état technique à vendre suite à la liquidation d’un atelier d’emboutissage en Pologne. Modernisée en 2022. Nouveau système de commande Simatic S7 et nouvelle armoire électrique. Barrières optiques installées. Lredpfxov E Efdo Al Njp Possibilité de voir la machine en fonctionnement - La presse est toujours raccordée à l’alimentation électrique. Lasco FP 222 S Presse Presse in sehr gutem technischen Zustand zu verkaufen aus einer aufgelösten Stanzerei in Polen. 2022 modernisiert. Neue Simatic S7 Steuerung und neuer Schaltschrank. Optische Schutzeinrichtungen installiert. Eine Besichtigung der Maschine im Betrieb ist möglich – Die Presse ist noch ans Stromnetz angeschlossen.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Fungsionalitas: berfungsi sepenuhnya, daya: 3 kW (4,08 hp), tegangan masuk: 380 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, gaya penekanan: 16 t, panjang langkah: 100 mm, lebar meja: 440 mm, panjang meja: 320 mm, jarak antara tiang: 500 mm, kapasitas tangki oli: 60 l, panjang total: 1.040 mm, lebar total: 1.030 mm, tinggi total: 2.000 mm, Dijual: Mesin press hidrolik 16 ton dalam kondisi baik. HANS SCHOEN TES 16, mesin press hidrolik dua kolom Tahun pembuatan: 1986 Gaya tekan: 160 kN Daya motor: 3 kW, 380 V, 50 Hz Pengoperasian dua tangan Tinggi pemasangan: 280 mm Jangkauan stroke: 100 mm Lebar meja: 440 mm Kedalaman meja: 320 mm Dimensi mesin: Tinggi: 200 cm Lebar: 103 cm Lrjdpfjzf Ilcjx Al Nep Panjang: 104 cm Berat: 1000 kg.

Kondisi: baru, Tahun pembuatan: 2024, Pressure: 60 t Stroke: 400 mm Table size: 800 x 500 mm Downward speed: from 4.03 mm/sec Lrodpfx Asvcrmvsl Njp Upward speed: 5.82 mm/sec Frame opening: 820 mm Max. oil pressure in working cylinder: 400 bar Oil capacity: 26 l Power supply: 400 V / 50 Hz Total power requirement: 3 kW Machine weight: approx. 0.55 t Space requirement: approx. 1.5 x 0.9 x 2.1 m Workshop press, manually and hydraulically operated Pressure cylinder can be moved horizontally, Work table height adjustable by cylinder hydraulics, Cylinder diameter: 150 mm, piston base diameter: 85 mm,

Kondisi: baru, Tahun pembuatan: 2024, Speed under load: 2.7 mm/sec Pressure: 100 t Stroke: 400 mm Lrsdpfxevcrm Ae Al Nep Table area: 920 x 560 mm Approach speed: 4.25 mm/sec Return speed: 8.22 mm/sec Max oil pressure (in working cylinder): 385 bar Oil capacity: 26 l Piston diameter: 125 mm Frame opening: 920 mm Voltage: 400 V / 50 Hz Total power requirement: 4 kW Machine weight: approx. 0.9 t Space requirement: approx. 1.7 x 0.9 x 2.1 m Unused workshop press (demonstration machine) Manual and hydraulic operation Pressure cylinder movable horizontally Table height adjustable via hydraulic cylinder Cylinder diameter: 175 mm, piston base diameter: 125 mm,

Kondisi: bekas, Tahun pembuatan: 1991, 1 Ljdpfx Aljyq Swho Nsrp

Kondisi: bekas, Pressing force: 35 t Outreach: 220 mm Stroke: 10 - 120 mm Stroke rate: 120 strokes/min Ram adjustment: 50 mm Table area: 590 x 440 mm Ram area: 460 x 160 mm Total power requirement: 2.2 kW Machine weight approx. 2.5 t Space required approx. W 0.88 x D 1.2 x H 1.95 m Equipment: - Hydraulic clutch Lrodpfoykb Dqjx Al Nsp - Adjustable table - Base frame, height 28 cm The following work is carried out in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack testing, new seals and V-belts - New paint finish: Light Grey RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines - New front hood - New control cabinet with ABB safety control and touch display Control via touchscreen mounted on the front of the control cabinet, Cabinet positioning (cable length) as agreed with the end customer, Standard 0.8–1.0 m beside the machine, incl. new wiring of the press - Foot switch - Two-hand control - Current safety inspection (UVV) with brake time measurement After the modernization is completed, the machine is approved for manual loading operations with open tools.

Kondisi: bekas, Tahun pembuatan: 1979, en: Technical details: Pressing force: 250 t Ram stroke: 40–160 mm Lsdpfju Nfinjx Al Norp Throat depth: 545 mm Ram adjustment: 110 mm Table size: 1250x800x100 mm Maximum distance between table and ram: 670 mm Drawing force: 16 t Table height above floor: 1000 mm Ram clamping surface: 900x670x100 mm Clearance between uprights: 500x400 mm Total power requirement: 23 kW Machine weight approx.: 16.6 t Machine dimensions: 2.8x1.4x3.7 m Control cabinet dimensions (LxWxH): 1.15x0.6x2.1 m Drawing device: Ejector and blank holder force each 16 t Table with 4 parallel T-slots (1250x800x100 mm) Ram plate with 4 radial T-slots Accessories: - Steel plate 1170x860x80 mm

Kondisi: bekas, Tahun pembuatan: 1981, Technical details: Pressing force: 250 t Ram stroke: 36...126 mm Throat depth: 400 mm Ram adjustment: 110 mm Ram surface area: 630 x 500 x 100 mm Installation height: 400 mm Table size: 1000 x 750 x 100 mm Lrodpfeu Nfkljx Al Nep Table height above floor: 1000 mm Total power requirement: 23.0 kW Approx. machine weight: 13.5 t Control cabinet dimensions (LxWxH): 1.1 x 0.7 x 1.3 m Approx. machine dimensions (LxWxH): 3.0 x 1.3 x 3.3 m Additional features: - Operation via two-hand control stand with foot pedal - 4 base plates Ø 220 mm

Kondisi: bekas, Tahun pembuatan: 1982, en-GB-001 Lodpfeu Nfmysx Al Njrp

Kondisi: bekas, Technical details: Pressing force: 40 t Throat depth: 365 mm Distance table/ram: 800 mm Ljdpou Nfuqefx Al Nerp Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Table surface: 630 x 500 x 73 mm Through-hole in table: Ø 205 mm Table height above floor: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Additional technical features: -Braking time: 443 ms -Braking distance: 9 mm -Last machine inspection: May 2020, valid for 1 year

Kondisi: bekas, Technical details: Lrsdju Nfw Sopfx Al Nsp Pressure: 0.9 t Installation height (table/ram, top): 350 mm Throat depth: 295 mm Ram diameter: 40 mm Table size: 600 x 330 mm Height above ground: 935 mm Machine weight approx.: - t Machine dimensions approx. (LxWxH): 1.2 x 0.8 x 2.1 m Punch holder with M24x60mm internal thread Hydraulic unit Röhm-Gamet, type 1E1 HS299, pressure 38 bar, tank capacity approx. 50 litres One-hand operation

Kondisi: bekas, Tahun pembuatan: 1983, Technical details: - Pressure: 100 t - Stroke: 20 mm fixed - Strokes per minute: 55 spm - Throat depth: 355 mm - Ram bore: Ø 36 mm - Table surface: 900x640 mm - Ram adjustment: 150 mm - Ram clamping surface: 500x415 mm - Height above floor: 800 mm - Maximum distance between table and ram: 390 mm - Table through-hole: Ø 330 mm - Total power requirement: 11 kW - Machine weight approx.: 7.5 t - Machine dimensions approx. LxWxH: 1.46x1.58x2.57 m - Transport dimensions LxWxH: 1.9x1.6x3.1 m The press is supplied without machine control cabinet (optional installation possible). Complete electric individual drive for 3x 380 Volt, 50 Hz Belt and ram guards Lrodpfxeu Nfizs Al Nsp Friction clutch and brake unit PRESSMATIC

Kondisi: bekas, Tahun pembuatan: 1969, en-GB:Technical details: Pressing force: 40 t Throat depth: 220 mm Stroke: 10 – 120 mm Ram adjustment: 63 mm Strokes per minute: 160 spm Distance table/ram: 300 mm Table size (LxW): 440 x 620 mm Passage hole in table: Ø 200 mm Ram clamping surface: 400 x 250 mm Machine weight approx.: 2.52 t Machine dimensions approx. (LxWxH): 1.5 x 1.2 x 1.3 m A clamping plate (LxW: 440 x 620 mm) with a centre bore Ø 100 mm is mounted on the table. A steel plate 380 x 325 x 27 mm is mounted on the ram. The press is equipped with two-hand operation. fr-FR:Détails techniques : Pression : 40 t Ledpfx Aleu Nfkxj Nsrp Profondeur de col de cygne : 220 mm Course : 10 - 120 mm Réglage du coulisseau : 63 mm Nombre de courses : 160 coups/min Distance table/coulisseau : 300 mm Dimensions de la table (Lxl) : 440 x 620 mm Ouverture traversante dans la table : Ø 200 mm Surface de bridage du coulisseau : 400 x 250 mm Poids de la machine env. : 2,52 t Dimensions de la machine (LxlxH) env. : 1,5 x 1,2 x 1,3 m Une plaque de bridage (Lxl : 440 x 620 mm) avec un alésage central Ø 100 mm est montée sur la table. Une plaque en acier de 380 x 325 x 27 mm est montée sur le coulisseau. La presse est équipée d'une commande bimanuelle. es-ES:Detalles técnicos: Presión: 40 t Cuello de cisne: 220 mm Carrera: 10 - 120 mm Ajuste del émbolo: 63 mm Carreras por minuto: 160 cpm Distancia mesa/émbolo: 300 mm Tamaño de la mesa (LxA): 440 x 620 mm Agujero pasante en la mesa: Ø 200 mm Superficie de sujeción del émbolo: 400 x 250 mm Peso de la máquina aprox.: 2,52 t Dimensiones de la máquina aprox. (LxAxH): 1,5 x 1,2 x 1,3 m En la mesa hay una placa de sujeción (LxA: 440 x 620 mm) con agujero central de Ø 100 mm. En el émbolo está montada una placa de acero de 380 x 325 x 27 mm. La prensa cuenta con control bimanual.

Kondisi: bekas, Tahun pembuatan: 1981, Technical Details: Pressing force: 30 t Clear width between uprights (WxD): 600/450 mm Installation height, table/ram top: 650 mm Ram stroke: approx. 600 mm / high-speed strokes Table size (LxW): 500 x 700 x Ø 60 mm Clamping surface of ram: 650 x 800 mm Hydraulic pressure: 170 bar Required air pressure: 4 - 6 bar Total connected load: 11 kW Machine weight approx.: 2.0 t Machine dimensions approx. (LxWxH): 1.26 x 1.75 x 3.4 m Four-column press, hydraulic Deburring press Possible application: may be used as a deburring press Additional technical features: - Table opening: 200 x 250 mm - Ram opening: Ø 160 mm Lrjdpou Nfmaefx Al Nep - Gap in uprights: width 600 mm, depth 450 mm - Operation via control panel Equipment: - Safety guard - Base plates

Kondisi: bekas, Tahun pembuatan: 1997, Technical details: Pressure: 160 t Column spacing: 1000 mm Stroke: 250 mm Installation height: 600 mm Distance table/ram: 600 mm Table height above floor: 550 mm Table surface: 810 x 860 mm Ram clamping area (D x W): 720 x 580 mm with T-slots Total power requirement: 15 kW Machine weight approx.: 16.0 t Machine is not yet assembled. Pictures are from the sales location. Ljdpfx Aou Nfmmsl Norp Additional features: - Lateral passage (W x H): 520 x 620 mm - Front passage (W x H): 660 x 600 mm Equipment: - Walk-on platform = height above floor approx. 2400 mm; platform approx. 2700 x 2600 x 1050 mm - Hydraulic unit - Oil cooler as per description.

Kondisi: bekas, Technical details: Press force: 250 t Lrjdpsu N Ddwefx Al Nep Stroke: Continuous idle stroke 40 mm Ram stroke: adjustable 36 – 126 mm Ram adjustment: 110 mm Ram clamping area: 630 x 500 mm (LxW) Bolster area: 1000 x 750 x 100 mm Distance table/ram: 400–526 mm Pass-through opening in table: 400 x 360 mm Operating pressure: 0.6 MPa Ejector stroke: 63 mm Throat depth: 400 mm Total power requirement: approx. 20.0 kW Dimensions control cabinet (LxWxH): 1.2 x 0.65 x 2.1 m Machine dimensions approx. (LxWxH): 2.9 x 1.2 x 3.4 m - Two-hand operation - Operator panel Accessories: - Base plate 2200 x 1500 x 40 mm

Kondisi: bekas, Tahun pembuatan: 2001, translate-001 Ledsxna Uzspfx Al Nerp

Kondisi: bekas, tecdet-press Lrjdsw Smukopfx Al Njp

Kondisi: bekas, Tahun pembuatan: 1990, Technical details: Pressure: 63 t Frame opening: 200 mm Stroke: 150 mm Installation height: 430 mm Strokes per minute: 400 spm T-slots H 12 650: 18 mm Table through-hole: 420 x 160 mm (W x L) Ram surface: 650 x 450 mm Control: Wanske Tronicpress CNC Clearance between uprights: 550 x 540 mm Tank capacity: 200 l Fixed ram stroke: 100 mm Ram diameter: 40 mm Table height above floor: 1000 mm Table: 600 x 450 mm Table height above floor with anti-vibration mounts: 880 mm Total power: 30 kW Machine weight approx.: 3.9 t Hydraulic punching press for precision work (high-speed press) - Suitable for punching, drawing, pressing, coin minting, bending, riveting, straightening, assembling - With hydraulic gripper feed unit type HS 150 and 7-roller straightening unit (synchronized) - Suitable for standard strips of approx. 0.4 mm - 2.5 mm thickness x approx. 160 mm width, as well as narrow strips up to approx. 4 mm thickness. Feed length can be freely adjusted via the control system. - With ram round column guide - With automatic central lubrication - High-speed: up to 400 strokes per minute - Motor-driven adjustable fixed stop (manually/motor-driven adjustable from below) - Operating modes: continuous stroke and/or single stroke Equipment: Lsdpfx Aju Icxqol Norp - 1x hydraulic power unit - 2x control cabinets Condition: Punch press has a control issue. Sale as is, as a donor for spare parts or as a replacement machine. In stock. *